Newport MKS Datasheets for Uncategorized Products
Uncategorized products is an area on Engineering360 used to provide representation for products that are not elsewhere classified.
Uncategorized Products: Learn more
Page:
1
2
| Product Name | Notes |
|---|---|
| Many sources emit infrared radiation to some degree, but only a few combine convenience and economy with sufficient radiant output and spectral uniformity to be practical in IR instrumentation. The... | |
| Please note that this product is being replaced by 7Z08360N. The 819M-PP-SL-0.5 Spectralon Coated Port Plug is for use on 1/2 inch ports of PTFE based 819C or 819D Series... | |
| The 0901 Power Supply is intended for use with New Focus detectors and receivers, but can also be used for general laboratory applications. Two of the three ±15 VDC outputs... | |
| The 0923 Accessory Cable is a 1 meter cable that is compatible with the latest Model 0901 with newer connectors (new style to new style). | |
| The 0923-2 Accessory Cable is a 2 meter cable that is compatible with the latest Model 0901 with newer connectors (new style to new style). This is a 2 meter... | |
| The 0924 Accessory Cable is a 1 meter cable that is compatible with the latest Model 0901 with newer connectors (new style to banana). | |
| The 0927 Accessory Cable is a 1 meter cable that is BNC male to SMB plug, compatible with various detector products such as the 650 MHz and 800 MHz Balanced... | |
| The 1225 Connector Adapter has a male SMA connector on one end and a female BNC connector on the other end. | |
| The 1226 Connector Adapter has a female SMA connector on one end and a male BNC connector on the other end. | |
| The 1227NF 40-GHz Flexible Cable gives you high performance at a reasonable cost. This 24 inch cable has a male Wiltron K connector on one end and a female Wiltron... | |
| The 1280 Filter Holder allows you to mount 1 inch diameter filters using either an included Delrin® ring or a setscrew depending upon filter thickness. Since they screw directly onto... | |
| The 1281 FC Fiber Adapter conveniently attaches optical fibers with FC connectors to New Focus detectors so you can use the same detector for both free-space and fiber experiments. | |
| The 1283 Asphere Adapter is designed for use of Compact Aspheric Lenses with the Three-axis Lens Positioner. The external threads are 1.042-32. The internal threads are 0.539-32. | |
| The 13950 Shielded Cuvette Holder holds standard 10 x 10 mm cuvettes atop an optical rod. It has an 8 mm wide by 29 mm high rectangular aperture on all... | |
| The 22493-01 ST Connector Adapter is used to plug a connector port on a 818-IS-1 or 918D-IS Series Integrating Sphere Detectors. | |
| The 22494-01S FC Connector Adapter is used to plug a connector port on a 818-IS-1 or 918D-IS Series Integrating Sphere Detectors. The measurement is valid for both an APC and... | |
| The 22497-01 Blank Plug is used to plug a connector port on a 818-IS-1 or 918D-IS Series Integrating Sphere Detectors. | |
| The 300-02 Temperature Controller Cable has a DB15 male connector on one end that connects to a 300B or 6100 temperature controller. Bare Wires on the other end connect to... | |
| The 300-04 Temperature Controller Cable (length 6 ft.) is for 350B and 6100. A DB15 Male connector on one side connects to a 300B or 6100. A DB15 Female connector... | |
| The 300-P Optical Rod Platform has three machined mounting surfaces: one parallel to the post axis and two perpendicular to it. The platform clamp is double-bored, forming two line contacts... | |
| The 3150-02 Temperature Controller Cable has a D-Sub 7W2 Male connector on one end connects to the 3150/3700 controller. The other end of the 6 foot long cable has bare... | |
| The 3150-04 Temperature Controller Cable has a D-Sub 7W2 Male connector on one end that connects to a 3150 or 3700 high power temperature controller. A D-Sub 7W2 Female connector... | |
| The 31850-01S LC Connector Adapter is used to plug a connector port on a 818-IS-1 or 918D-IS Series Integrating Sphere Detectors. | |
| The 31856-01S SC Connector Adapter is used to plug a connector port on a 818-IS-1 or 918D-IS Series Integrating Sphere Detectors. | |
| The 32A Optical Support Rod Fine Positioner provides fine height adjustment via a cap screw that engages a 1/4-20 tapped hole in either end of an optical support rod mounting... | |
| The 34 Rotatable Rod Platform has 1/4-20 threaded holes and is designed to go with our Heavy-Duty Optical Rods allowing the mounting of components at arbitrary angles. One end of... | |
| The 340-RC Rod Clamp may be manually positioned to any height or any angular orientation around the rod axis by tightening the knurled knob. This clamp is compatible with Models... | |
| The 3502 Optical Chopper provides rock-solid stability and flexibility because its chopping frequency is phase-locked to its own internal frequency synthesizer. It comes complete with six chopper wheels, a chopper... | |
| The 3502-BASE Optical Chopper provides rock-solid stability and flexibility because its chopping frequency is phase-locked to its own internal frequency synthesizer. It comes with a chopper head motor with built-in... | |
| The 3511 Chopper Wheel has 2 slots. It is an additional wheel for the Model 3502 Optical Chopper. This high quality chopper wheel is made of a beryllium copper alloy,... | |
| The 3512 Chopper Wheel has 7/5 slots. It is an additional wheel for the Model 3502 Optical Chopper. This high quality chopper wheel is made of a beryllium copper alloy,... | |
| The 3513 Chopper Wheel has 42/30 slots. It is an additional wheel for the Model 3502 Optical Chopper. This high quality chopper wheel is made of a beryllium copper alloy,... | |
| The 3514 Chopper Wheel has 60 slots. It is an additional wheel for the Model 3502 Optical Chopper. This high quality chopper wheel is made of a beryllium copper alloy,... | |
| The 3515 Chopper Wheel has 100 slots. It is an additional wheel for the Model 3502 Optical Chopper. This high quality chopper wheel is made of a beryllium copper alloy,... | |
| The 3516 Chopper Wheel has 60/2 slots. It is an additional wheel for the Model 3502 Optical Chopper. This high quality chopper wheel is made of a beryllium copper alloy,... | |
| The 370-RC Rack-and-Pinion Rod Clamp incorporates independent clamping and a rack-and-pinion positioning mechanism for more precise vertical adjustment. This approach limits the rotation of the clamp to ±0.5°. For 360° | |
| The 41210 Focusing Beam Probe Lens is used as the Lens 2 option for 77646 or 77662 focusing and imaging beam probes. This 1/2 inch (12.7 mm) diameter high purity... | |
| The 466A-147 Large Fixed Bracket has a 60 mm length slot and 6-32 tapped holes. It is used for mounting accessories along X axis of M-466A flexure stages. Includes 466A-154... | |
| The 466A-148 Small Fixed Bracket has a 20 mm length slot and 6-32 tapped holes. It is used for mounting accessories along X axis of M-466A flexure stages. Includes 466A-154... | |
| The 466A-149 L Shaped Bracket has a 46 mm length slot and 6-32 tapped holes. It is used for mounting accessories along Y axis of 466A flexure stages. Includes 466A-154... | |
| The 466A-150 Objective Mount is Fitted with a removable stainless steel sleeve cut with the microscope objective thread. It allows for easy adjustment and exchange of objectives or other components... | |
| The 466A-153 Component Plate provides a basic platform for mounting of non-standard components to a 466A Series Stage. | |
| The 466A-154 Clamp Set for use with 466A Series Flexure Stages and Accessories it includes (2) clamps, 2 screw, and an Allen-wrench. | |
| The 466A-156 Extension Tube works with the 466A-150 Objective Mount, extending the reach by 1 inch allowing access to components on wide platforms | |
| The 466A-189 Universal Stand provides a simple fixed platform for mounting standard devices and fiber holders onto a 466A-147, 466A-148 or 466A-149 fixed bracket. It provides the same optical height... | |
| The 466A-700 Fiber Ferrule Holder holds optical fibers terminated with a 2 to 4.5 mm cylindrical ferrule. It can also be used to hold GRIN lenses. A V-groove is formed... | |
| The 466A-701 Fiber Ferrule Holder holds optical fibers terminated with a 1 to 2 mm cylindrical ferrule. It can also be used to hold GRIN lenses. A V-groove is formed... | |
| The 466A-709 Single Arm Bare Fiber Holder has double V-grooves for repeatable fiber placing. A single clamp arm with 25 to 125 g adjustable clamping force swings clear of V-groove... | |
| The 466A-710 Double Arm Bare Fiber Holder has double V-grooves for repeatable fiber placing. Two clamp arms with 25 to 125 g adjustable clamping force swing clear of V-groove for... | |
| The 466A-711 Single Arm Bare Fiber Holder has a magnetic clamp arm for fast component changes. Compatible with the 466A Series Flexure Stages. | |
| The 466A-717 High Precision Fiber Rotator is an economical fiber rotator designed for less demanding rotation alignment. Its slotted design allows for easy insertion and removal of fiber and full... | |
| The 466A-718 Fiber Rotator is an economical fiber rotator designed for less demanding rotation alignment. It's slotted design allows for easy insertion and removal of fiber and full 360° rotation. | |
| The 466A-734 Grin Lens Holder has a 4 mm long reversible V-block. It holds GRIN lenses 1 to 2 mm or 2 to 3 mm in diameter. Compatible with the... | |
| The 466A-735 FC Connectorized Fiber Holder allows easy insertion and removal of FC connectorized fibers. Compatible with the 466A Series Flexure Stages. | |
| The 466A-736 SMA Connectorized Fiber Holder allows easy insertion and removal of SMA connectorized fibers. Compatible with the 466A Series Flexure Stages. | |
| The 466A-737 ST Connectorized Fiber Holder allows easy insertion and removal of ST connectorized fibers. Compatible with the 466A Series Flexure Stages. | |
| The 466A-750 Long Reach Bare Fiber Holder allows locating 125/250 μm bare fibers offset from the central axis. The fiber is held in user-replaceable double V-groove by spring clamps. A... | |
| The 466A-752 Universal Base holds components on top of 466A flexure stages. It locates in either of the two orthogonal slots on top plate for offset component mounting. Compatible with... | |
| The 49121 UV Protective Gloves are U.S. size 10 large gloves designed to protect the hands yet maintain the flexibility necessary for manipulation of small components. Hands working with fixtures... | |
| The 49123 UV Protective Gloves are U.S. size 8 medium gloves designed to protect the hands yet maintain the flexibility necessary for manipulation of small components. Hands working with fixtures... | |
| The 500-02 Laser Diode Driver Cable is for 505B, 560B, and 6100 driver. DB9 male connector to bare wire. | |
| The 500-04 Laser Diode Driver Cable is for 505B, 560B, and 6100 drivers. DB9 male connector to DB9 female connector. | |
| The 561-ADPT Height Adaptor raises 561D-XYZ and 561D-YZ stages to the height of a 562 stage. To attach the 561-ADPT, the bottom base plate of the 561D-XYZ or 561D-YZ must... | |
| The 561-BL1 Ball Lens Module attaches 1 mm diameter ball lenses to a 561 Series stage. The ball lens module is gently held in a 561-MM Module Mount. | |
| The 561-BL2 Ball Lens Module attaches 2 mm diameter ball lenses to a 561 Series stage. The ball lens module is gently held in a 561-MM Module Mount. | |
| The 561-BL3 Ball Lens Module attaches 3 mm diameter ball lenses to a 561 Series stage. The ball lens module is gently held in a 561-MM Module Mount. | |
| The 561-FC Fiber Chuck Holder is designed to attach 0.25 inch (6.35 mm) diameter fiber chucks to 561 Series stages for alignment. | |
| The 561-FCA3 Connectorized Fiber Holder with Rotation mounts SMA connectorized fiber to a 561 Series stage. Fiber can be rotated 360° in holder. | |
| The 561-FCA4 Connectorized Fiber Holder with Rotation mounts FC connectorized fiber to a 561 Series stage. Fiber can be rotated 360° in holder. | |
| The 561-FCA6 Connectorized Fiber Holder with Rotation mounts ST connectorized fiber to a 561 Series stage. Fiber can be rotated 360° in holder. | |
| The 561-FCA9 Connectorized Fiber Holder with Rotation mounts SC connectorized fiber to a 561 Series stage. Fiber can be rotated 360° in holder. | |
| The 561-FCH Connectorized Fiber Holder mounts FC connectorized fiber to a 561 Series stage. | |
| The 561-FH Bare Fiber Holder is designed to attach 125 μm fibers to 561 Series stages for alignment. The fiber gently held in precision V-groove. | |
| The 561-GBM Blank GRIN lens mount can be machined to create custom component holders to mount on the 561/562 rail. | |
| The 561-GM Gimbal Fiber Chuck Positioner is designed to hold 0.25 inch (6.35 mm) diameter fiber chucks. Rotation of 360° in θx and Tilt of ±5° in θYθZ with sensitivity... | |
| The 561-GR Gradient Index (GRIN) Lens Mount, mounts GRIN lenses up to 4.5 mm diameter to a 561 Series stage. Lenses held in a V-groove with a nylon-tipped setscrew. | |
| The 561-LCH Connectorized Fiber Holder mounts LC connectorized fiber to a 561 Series stage. | |
| The 561-MM Module Mount accepts modules for mounting ball lenses, GRIN lenses, fiber collimators, and fiber ferrules to a 561 Series stage. Optics and devices are gently held in modules. | |
| The 561-OBJ Objective Lens Mount can mount microscope and laser diode objective lenses to a 561 Series stage. The mount uses a standard 0.800-36 RMS thread. | |
| The 561-OBM Blank Objective Lens Mount can be machined to create custom component holders to mount on the 561/562 rail. | |
| The 561-PCH Photonic Crystal Fiber Mount Kit is designed to attach short lengths of Photonic Crystal Fiber to a 561 Series stage. It includes 561-PCH-M Photonic Crystal Fiber Mount, 561-PCH-V... | |
| The 561-PCH-M Photonic Crystal Fiber Mount is part of the 561-PCH Mounting Kit. | |
| The 561-PCH-V Photonic Crystal Fiber V-Block is part of the 561-PCH Mounting Kit. | |
| The 561-RAIL-1 is a 1.0 in. long dovetail rail that attaches to 561-GON stage. It comes with two imperial and two metric screws for mounting. | |
| The 561-RFC Fiber Chuck Rotation Mount is designed to hold 0.25 inch (6.35 mm) diameter fiber chucks on a 561 Series stage. Rotation of 360° in θx, with a sensitivity... | |
| The 561-RL is a 2.6 inch long dovetail rail that attaches to 561D-XYZ and 561-TILT stages. | |
| The 561-SCH Connectorized Fiber Holder mounts SC connectorized fiber to a 561 Series stage. | |
| The 561-TS Narrow Profile T-Stand is a fixed platform used to mount a component between two positioning stages. | |
| The 561-UM Universal Module is used to mount custom component holders on the 561/562 rail. | |
| The 561-UST Universal Stand is a fixed platform used to mount a component next to a 561 Series positioning stage. | |
| The 561-V1 V-Groove Module attaches 1 to 1.75 mm diameter cylindrical devices to a 561 Series stage. Ideal for GRIN lenses, fiber collimators, and fiber ferrules, the module can be... | |
| The 561-V2 V-Groove Module attaches 2 to 2.75 mm diameter cylindrical devices to a 561 Series stage. Ideal for GRIN lenses, fiber collimators, and fiber ferrules, the module can be... | |
| The 561-V3 V-Groove Module attaches 3 and 3.25 mm diameter cylindrical devices to a 561 Series stage. Ideal for GRIN lenses, fiber collimators, and fiber ferrules, the module can be... | |
| The 561-VH Vacuum Waveguide Mount has eight vacuum ports on its top surface to mount small to large devices to a 561 Series stage. A brass fitting is located on... | |
| The 562-RAIL-3.7 is a Dovetail Rail that attaches to 562F-XYZ and 562F-TILT stages. It is 3.7 in. long. It comes with three imperial and three metric screws for mounting. | |
| The 562-TS Narrow Profile T-Stand is a fixed platform to mount a component between two 562 Series positioning stages. | |
| The 562-UST Universal Stand is a fixed platform used to mount a component next to a 562 Series positioning stage. | |
| The 5708 Asphere Adapter allows you to mount our aspheric lenses in our fiber aligner kits and in other 1 in. mounts. When used with Model 9091 or 9051 Fiber... | |
| The 5709 RMS Threaded Asphere Adapter is for mounting the aspheric lenses as microscope objectives. | |
| The 6123NS Liquid Filter consists of a cell that holds the liquid and two fused silica windows. This 2 Inch Series cell has an external chamber for cooling water circulation... | |
| The 61945 Liquid Filter consists of a cell that holds the liquid and two fused silica windows. This 1.5 Inch Series cell has an external chamber for cooling water circulation... | |
| The 6195 Flange Mounted Cell is a simple lens holder with a 1.5 Inch Series female-flange on one end and a male-flange on the other. It holds 1.5 inch (38.1... | |
| The 6199 Secondary Focusing Lens Assembly for Light Sources is used to focus the collimated beam from a condenser and create an image of the arc or filament one focal... | |
| The 62020 Multiple Filter Holder is an inexpensive alternative to our enclosed models if you don’t need an enclosed light path. This filter holder is open so you have easy... | |
| The 62030 Manual Iris Diaphragm is excellent for light attenuation or as a lens aperture stop. A lever on the top of the diaphragm controls the 2.0 to 36.0 mm... | |
| The 6214 Liquid Filter consists of a cell that holds the liquid and two fused silica windows. This 3 Inch Series cell has an external chamber for cooling water circulation... | |
| The 6215 Multiple Filter Holder is an inexpensive alternative to our enclosed models If you don’t need an enclosed light path. This filter holder is open so you have easy... | |
| The 6219 Secondary Focusing Lens Assembly for Light Sources is used to focus the collimated beam from a condenser and create an image of the arc or filament one focal... | |
| The 6222 Flange Mounted Cell is a simple lens holder with a 2 Inch Series female-flange on one end and a male-flange on the other. It holds 2 inch (50.8... | |
| The 6237 Flange Mounted Cell is a simple lens holder with a 3 Inch Series female-flange on one end and a male-flange on the other. It holds 3 inch (76.2... | |
| The 625-RC2 Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 2.0 in. diameter mirrors. It is compatible with Newport's rod models... | |
| The 625-RC2-M Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 50.8 mm diameter mirrors. It is compatible with Newport's rod models... | |
| The 625-RC4 Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 4.0 in. diameter mirrors. It is compatible with Newport's rod models... | |
| The 625-RC4-M Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 101.6 mm diameter mirrors. It is compatible with Newport's rod models... | |
| The 625-RC6 Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 6.0 in. diameter mirrors. It is compatible with Newport's rod models... | |
| The 625-RC6-M Rod Mount Kinematic Mirror Mount is a rod-mountable device that provides vertical positioning flexibility and convenience for 152.4 mm diameter mirrors. It is compatible with Newport's rod models... | |
| The 66087 Ozone Eater filters toxic ozone from UV-emitting lamp housings, making your work environment ozone free and safer! It is the best solution if you do not have access... | |
| The 66215 Full Reflector Beam Turning Mirror is coated with an AlMgF2 coating optimized to increase reflectivity in the ultraviolet. It is useful from 200 nm to 30 μm spectral... | |
| The 66225 Full Reflector Beam Turning Mirror is coated with an AlMgF2 coating optimized to increase reflectivity in the ultraviolet. It is useful from 200 nm to 30 μm spectral... | |
| The 66232 Dichroic Beam Turning Mirror is designed for high reflectance and polarization insensitivity over a limited 240 to 255 nm primary spectral range. Most of the IR is transmitted... | |
| The 66233 Dichroic Beam Turning Mirror is designed for high reflectance and polarization insensitivity over a limited 240 to 255 nm spectral range. Most of the IR is transmitted through... | |
| The 66235 Full Reflector Beam Turning Mirror is are coated with an AlMgF2 coating optimized to increase reflectivity in the ultraviolet. It is useful from 200 nm to 30 μm... | |
| The 66243 Dichroic Beam Turning Mirror is designed for high reflectance and polarization insensitivity over a limited 190 to 195 nm spectral range. Most of the IR is transmitted through... | |
| The 66245 Beam Turning Mirror Holder has 1.5 Inch Series male and female-flanged apertures. The male flange end fits to the output of an Oriel® Lamp Housing condenser. The... | |
| The 66246 Beam Turning Mirror Holder has 2 Inch Series male and female-flanged apertures. The male flange end fits to the output of an Oriel® Lamp Housing condenser. The... | |
| The 66247 Beam Turning Mirror Holder has 3 Inch Series male and female-flanged apertures. The male flange end fits to the output of an Oriel® Lamp Housing condenser. The... | |
| The 66290 Flange Step Down Adapter has a 3 Inch Series male flange on one end and a 1.5 Inch Series female flange on the other. It allows you to... | |
| The 66292 Flange Step Down Adapter has a 2 Inch Series male flange on one end and a 1.5 Inch Series Female flange on the other. It allows you to... | |
| The 68950 is a Digital Exposure System for Research Lamp Sources. The system is a light intensity controller and digital timer in one. The light intensity controller maintains a constant... | |
| The 68951 Digital ExposureSystem is a light intensity controller and digital timer in one package. It maintains a constant light level and allows preset timed or dosage based exposure control. | |
| The 68952 is an adapter kit used to connect a Research series lamp housing to the 68950 Light Intensity Controller and Digital Timer. It includes two apertures, either of which... | |
| The 68954 is an adapter kit used to connect a Series Q lamp housing to the 68950 Light Intensity Controller and Digital Timer. The kit connects to an unused port... | |
| The 70275 Beam Aperture Disk is a 1.0 inch (25.4 mm) diameter aluminum disc with a 0.4 inch circular opening. It acts as a large area pinhole for incoherent light... | |
| The 70276 Beam Aperture Disk is a 1.0 inch (25.4 mm) diameter aluminum disc with a 0.2 inch circular opening. It acts as a large area pinhole for incoherent light... | |
| The 70277 Beam Aperture Disk is a 1.0 inch (25.4 mm) diameter aluminum disc with a 0.1 inch circular opening. It acts as a large area pinhole for incoherent light... | |
| The 70291 Beam Aperture Disk is a 1.0 inch (25.4 mm) diameter aluminum disc with a 0.04 inch circular opening. It acts as a large area pinhole for incoherent light... | |
| The 70456 Single Fiber Holder is used one to couple a single SMA terminated fiber directly to an Oriel® Light Source, Detector or Integrating Sphere. It has a 1.5... | |
| The 70703 Laboratory Power Supply is a simple, low cost laboratory power supply (70063 or 70055 cable required and sold separately). We use it to power our preamplifiers and detectors... | |
| The 70709 Laboratory Power Supply is a simple, low cost laboratory power supply (70063 or 70055 cable required and sold separately). We use it to power our preamplifiers and detectors... | |
| The 70710 Current Preamplifier is a low noise current to voltage amplifier designed for photomultiplier tubes or photodiodes operating in photovoltaic mode, such as unamplified detector models 71650 and 71653. | |
| The 7123 Flange Mounted Cell is a simple mount with a 1.5 Inch Series female-flange on one end and a male-flange on the other. It holds 1 inch (25.4 mm)... | |
| The 7124 Filter Adapter holds 1 inch (25.4 mm) diameter filters in the 71260 Quick Change Filter Holder. It can also be used with the legacy model 77805 Beam Probe... | |
| The 71260 Quick Change Filter Holder provide the ability to quickly insert and remove filters in the middle of an optical train. A plunger on the bottom of the holder... | |
| The 71261 Quick Change Filter Holder provide the ability to quickly insert and remove filters in the middle of an optical train. A plunger on the bottom of the holder... | |
| The 71262 Quick Change Filter Holder provide the ability to quickly insert and remove filters in the middle of an optical train. A plunger on the bottom of the holder... | |
| The 7129 Flanged Spacer Tube encloses beam paths between separate 1.5 Inch Series flanged components. This set screw version has a 50 mm length. Try the quick connect version if... | |
| The 7130 Flanged Spacer Tube encloses beam paths between separate 1.5 Inch Series flanged components. This set screw version has a 25 mm length. Try the quick connect version is... | |
| The 71306 Flange Mounted Cell is a simple mount with a 1.5 Inch Series female-flange on one end and a male-flange on the other. It holds 1 inch (25.4 mm)... | |
| The 71310 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 1.5 Inch Series male flange... | |
| The 71311 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 1.5 Inch Series male flange... | |
| The 71312 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 1.5 Inch Series male flange... | |
| The 71314 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 2 Inch Series male flange... | |
| The 71315 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 2 Inch Series male flange... | |
| The 71316 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 3 Inch Series male flange... | |
| The 71317 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 3 Inch Series male flange... | |
| The 71318 Adjustable Light Shield is used to enclose the beam from a light source to a monochromator or spectrograph. This light shield has a 3 Inch Series male flange... | |
| The 7132 Flanged Spacer Tube encloses beam paths between separate 1.5 Inch Series flanged components. This set screw version has a 100 mm length. Try the quick connect version is... | |
| The 71400 Manual Iris Diaphragm is excellent for light attenuation or as a lens aperture stop. A lever on the top of the diaphragm controls the 1 to 25 mm... | |
| The 71430 Manual Shutter is a low cost and easy to use device for reliably checking radiometric zero. The easily accessible lever moves a slide in and out of the... | |
| The 71445 Electronic Safety Shutter consists of a 1.5 Inch Series flanged enclosure that houses the blade, and a stand-alone shutter drive for 115 and 220 V operation. The enclosure... | |
| The 71446 Electronic Safety Shutter consists of a 2 Inch Series flanged enclosure that houses the blade, and a stand-alone shutter drive for 115 and 220 V operation. The enclosure... | |
| The 71582 is the detector head component of the LIK-LMP Light Intensity Controller Kit for use with the OPS Power Supply Series. It is also the detector head of the... | |
| The 71683 Detector Calibration Module is a BNC to DB15 interface adapter which allows any Oriel unamplified Silicon or Germanium detector to function with the Newport 1936-R/2936-R Optical Power Meter... | |
| The 71686 Detector Calibration Modules is a BNC to DB15 interface adapter which allows any Oriel amplified Silicon or Germanium detector to function with the Newport 1936-R/2936-R Optical Power Meter... | |
| The 74001 Micrometer Driven Slit Assembly allows continuously variable width from 4 μm to 3 mm, and continuously variable height from 3 mm to 12 mm with ±10 μm repeatability. | |
| The 74006 Mounting Plate is used to secure a Cornerstone 130B Monochromator to an inch or metric optical table. The ability to mount the monochromator simplifies setup and alignment of... | |
| The 74009 Hand Controller is designed specifically for use with the Oriel® Cornerstone series monochromators and MS260i spectrographs. It is very easy to set up – simply plug it... | |
| The 74017 Mounting Kit connects the Cornerstone 130B monochromator to an arc lamp or quartz tungsten halogen light source. This kit is compatible with Oriel® Research Lamp Housings which... | |
| The 74104 Mounting Kit provides a convenient method to mount and couple the Cornerstone 260 monochromator to an arc lamp or quartz tungsten halogen light source. This kit is compatible... | |
| The 74104B Mounting Kit provides a convenient method to mount and couple the Cornerstone 260B monochromator to an arc lamp or quartz tungsten halogen light source. This kit is compatible... | |
| The 74105 Mounting Plate is used to secure a Cornerstone 260 Monochromator or MS260i Spectrograph to an inch or metric optical table. The ability to mount the monochromator/spectr ograph simplifies... | |
| The 74105B Mounting Plate is used to secure a Cornerstone 260B Monochromator to an inch or metric optical table. The ability to mount the monochromator simplifies setup and alignment of... | |
| The 74115B motorized slit assembly may be adjusted from 6 µm to 3 mm width in 6 µm steps. The slit width is controlled through the utility software, optional hand... | |
| The 75162 is a two-aperture chopper wheel used with the 75160NF Oriel® Optical Chopper Controller and LIDA-SRS-KIT Lock-in Digital Amplifier. The maximum beam size able to pass through the... | |
| The 75163 is a five-aperture chopper wheel used with the 75160NF Oriel® Optical Chopper Controller and LIDA-SRS-KIT Lock-in Digital Amplifier. The maximum beam size able to pass through the... | |
| The 75164 is a thirty-aperture chopper wheel used with the 75160NF Oriel® Optical Chopper Controller and LIDA-SRS-KIT Lock-in Digital Amplifier. The maximum beam size able to pass through the... | |
| The 75166 is a twelve-aperture chopper wheel used with the 75160NF Oriel® Optical Chopper Controller and LIDA-SRS-KIT Lock-in Digital Amplifier. The maximum beam size able to pass through the... | |
| The 76595 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between... | |
| The 76596 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between... | |
| The 76597 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between... | |
| The 76600 Light Guide Collimating Probe collimates the highly divergent outputs of large size liquid light guides. This beam probe can be used to collimate the output from our liquid... | |
| The 76605 Light Guide Collimating Probe collimates the highly divergent outputs of large size liquid light guides. This beam probe can be used to collimate the output from our liquid... | |
| The 76615 Beam Probe Mount is an easy to use post-mountable holder. Simply slide the beam probe into the holder, adjust for optimal position, and secure it with the set... | |
| The 76616 Beam Probe Mount is an easy to use post-mountable holder. Simply slide the beam probe into the holder, adjust for optimal position, and secure it with the set... | |
| The 76992 is especially suited to laser or focal plane use and applications including beam modulation at frequencies up to 150 Hz in burst mode. Burst frequency rating is specified... | |
| The 76993 is useful for detector protection and gating at frequencies of up to 40 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one... | |
| The 76994 is useful for detector protection and gating at frequencies of up to 40 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one... | |
| The 76995 Electronic Shutter Driver is required to operate Oriel fast shutters. You must provide TTL pulses, from a Computer (RS 232 interface), from the 68945 Digital Timer, or another... | |
| The 77211 Fixed Slit has a 6.32 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77212 Fixed Slit has a 3.16 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77213 Fixed Slit has a 1.56 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77214 Fixed Slit has a 1.24 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77215 Fixed Slit has a 0.76 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77216 Fixed Slit has a 0.60 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77217 Fixed Slit has a 0.28 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77218 Fixed Slit has a 0.12 mm width and 18 mm height and is the most economical choice if only a few slit sizes are required.. They also offer... | |
| The 77219 Fixed Slit has a 0.050 mm width and 6 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77220 Fixed Slit has a 0.025 mm width and 3 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77221 Fixed Slit is the most economical choice if you only need a few slit sizes. This 50 μm width by 3 mm precision slit is fixed on a... | |
| The 77222 Fixed Slit has a 0.010 mm width and 2 mm height and is the most economical choice if only a few slit sizes are required. They also offer... | |
| The 77258 Flanged Focusing Lens Assembly is a simple lens holder frequently used for focusing the output of a collimated source onto a monochromator. It features precise 2 mm X... | |
| The 77259 X-Y-Z Focusing Lens Assembly is used to focus a collimated source onto a small target (slit, fiber, cuvette), This lower cost, stripped down version (no integral filter holder... | |
| The 77260 X-Y-Z Focusing Lens Assembly is used for imaging the output of a monochromator onto a detector or fiber. It has an integral filter holder and manual shutter, and... | |
| The 77294 Fixed Slit Holder may be mounted to the input port of an Oriel® Spectrograph, or at the input and output ports of many Oriel Monochromators. Using fixed... | |
| The 77330 Focusing Lens Assembly is a useful accessory for Oriel® Monochromators and Spectrographs. It re-images a source onto the instrument’s input slit, or images the monochromator output onto... | |
| The 77357 Fiber Bundle Flanged Mount holds our circular to circular and circular to rectangular fiber bundles at the input or output of any Oriel® 1.5 Inch Series female... | |
| The 77358 Fiber Bundle Flanged Mount couples the rectangular end of a Large Slit Fiber Bundle to a monochromator slit. If you are working with a fused silica bundle, use... | |
| The 77387 Monochromator Mounting Kit for the 77250B and legacy 77250 Monochromators allows the greatest flexibility. With two optical rods and rod holders (ordered separately), you can vary the optical... | |
| The 77529 F/# Matcher has precise X,Y and Z focus adjustment for optimal alignment of the fiber image with the monochromator slit. It has a 1.5 Inch Series female Quick... | |
| The 77612 Beam Probe Mount is an easy to use post-mounted holder. Simply slide the beam probe into the holder, adjust for optimal position, and secure it with the set... | |
| The 77614 Miniature Vise is a very simple, low cost holder for flat optical components like filters or optics. It holds circular or square optics of any dimension up to... | |
| The 77644 Collimating Beam Probe is made from fused silica and has a 19 mm effective focal length lens. It captures and collimates the output cone from fused silica fiber... | |
| The 77645 Collimating Beam Probe has a low F/# compound glass lens with an 11 mm effective focal length. It collimates the highly divergent output from glass bundles, and transmits... | |
| The 77646 Focusing and Imaging Beam Probe focuses the output of our Fused Silica Fiber Bundles. The fiber bundle is placed one focal length from Lens 1, to produce a... | |
| The 77721 Fixed Slit Holder may be mounted to the input port of an Oriel® MS257 Spectrograph, or at the input and output ports of the Oriel MS257 Monochromator. | |
| The 77725 Fixed Slit is the most economical choice if you only need a few slit sizes. This 25 μm width by 6 mm precision slit is fixed on a... | |
| The 77728 Fixed Slit is the most economical choice if you only need a few slit sizes. This 100 μm width by 3 mm precision slit is fixed on a... | |
| The 77729 Fixed Slit is the most economical choice if you only need a few slit sizes. This 100 μm width by 10 mm precision slit is fixed on a... | |
| The 77730 Fixed Slit is the most economical choice if you only need a few slit sizes. This 200 μm width by 3 mm precision slit is fixed on a... | |
| The 77731 Fixed Slit is the most economical choice if you only need a few slit sizes. This 25 μm width by 10 mm precision slit is fixed on a... | |
| The 77732 Fixed Slit is the most economical choice if you only need a few slit sizes. This 500 μm width by 3 mm precision slit is fixed on a... | |
| The 77733 Fixed Slit is the most economical choice if you only need a few slit sizes. This 1000 μm width by 15 mm precision slit is fixed on a... | |
| The 77734 Fixed Slit is the most economical choice if you only need a few slit sizes. This 2000 μm width by 20 mm precision slit is fixed on a... | |
| The 77735 Fixed Slit is the most economical choice if you only need a few slit sizes. This 5000 μm width by 20 mm precision slit is fixed on a... | |
| The 77736 Fixed Slit is the most economical choice if you only need a few slit sizes. This 5000 μm width by 15 mm precision slit is fixed on a... | |
| The 77765 Motorized Flip Mirror lets you remotely switch between two sources, or deflect a single beam into or out of the optical path. It works with laser beams, focused... | |
| The 77776 Fiber Bundle Focusing Assembly is used to convert a collimated light source into a fiber optic source. All the components necessary to image a source onto the face... | |
| The 77790 Flange Converter converts a 1.5 Inch Series set screw type female flange, into a Quick Connect female flange. Use it on any female flanged component that requires frequent... | |
| The 77791 Light Source Coupling Ring has 1.5 Inch Series female connections on both ends. This Quick Connect model is very convenient to use. Just snap in the two flanged... | |
| The 77792 Light Source Coupling Ring has 1.5 Inch Series male connections on both ends. This Quick Connect model is very convenient to use. Just snap in the two flanged... | |
| The 77799 Fiber Bundle Focusing Assembly is used to convert a collimated light source into a fiber optic source. All the components necessary to image a source onto the face... | |
| The 77800 Fiber Bundle Focusing Assembly is used to convert a collimated light source into a fiber optic source. All the components necessary to image a source onto the face... | |
| The 77802 Flanged Fiber Bundle Holder holds and adjusts an Oriel® 11 mm fiber bundle at the input or output of a 1.5 inch series male-flanged Oriel component or... | |
| The 77803 Beam Probe Fixed Flange Mount enables the user to position the probe axially and secure it in place with set screws. It does not have adjustment capability, and... | |
| The 77814 Rod Mounted Fiber Bundle Holder is an inexpensive and simple device that holds any 11 mm Fiber Bundle atop an optical rod. You can vary the optical axis... | |
| The 77817 Fiber Bundle Flanged Mount holds our circular to circular and circular to rectangular fiber bundles at the input or output of any Oriel® 1.5 Inch Series male... | |
| The 77829 Light Source Coupling Ring has 1.5 Inch Series female connections on both ends. This set screw type uses three set screws to hold both flanged components together. The... | |
| The 77848 Rod Mounted Single Fiber Holder is a simple way to hold an SMA terminated fiber atop an optical rod. The rod is not included. The thin profile lets... | |
| The 77855 Monochromator Fiber Adapter holds the rectangular end of the "Large Slit" Fiber Bundles at the input of Model 77250 Oriel® Monochromators. The fiber replaces the slit. This... | |
| The 77860 Monochromator Fiber Adapter holds fiber bundles with an 11 mm standard ferrule termination. It secures the bundle against the slit of any Oriel® Monochromator or Spectrograph (instrument... | |
| The 77863 Monochromator Fiber Adapter is for Oriel® Bundles with an 11 mm quick connect ferrule termination. The female flange on the 77863 couples to the male flange of... | |
| The 77873 Beam Probe Fixed Flange Mount enables the user to position the probe axially and secure it in place with set screws. It dos not have adjustment capability, and... | |
| The 78150 Beam Splitter Mount holds a 2 inch (51 mm) square beam splitter, up to 0.25 inch (6 mm) thick, at a 45° angle. Since it can be coupled... | |
| The 78816 Flange Converter converts a male C-Flange to female standard flange. 1.5 Inch Series. | |
| The 81045 Dichroic Mirror is useful If you want to block a selected region of the UV, and/or completely block or reduce the VIS and IR. This 280 to 400... | |
| The 81050 UVB/C Blocking Filter is a 3 inch diameter optional filter to shape the spectral output of our 1000 W UV Flood Sources (simulators) or SOL-UV series. This filter... | |
| The 81051 UVC Blocking Filter is a 3 inch round optional filter to shape the spectral output of our 1000 W UV Flood Sources (simulators) or SOL-UV series. This filter... | |
| The 81090 Air Mass Filter corrects the output of a xenon lamp to better match the solar spectrum found outside of earth's atmosphere. This 2 inch x 2 inch filter... | |
| The 81094 Air Mass Filter corrects the output of a xenon lamp to better match the total (direct and diffuse) spectrum when the sun is at a zenith angle of... | |
| The 81389R Air Mass Filter simulates the solar spectrum from directional rays at a zenith angle of 37.0° to ground level. It does not account for sunlight that is scattered... | |
| The 818-FA Connectorized Fiber Adapter Mount allows the FP3/FP4 series fiber connector adapters to be connected to Newport's photodiode detectors. The fiber connector adapters can be easily and securely plugged... | |
| The 818-FA2 is a bare fiber holder mount for Newport's photodiode detectors. An optical fiber can be loaded on Model FP3-FH1 Bare Fiber Holder, available separately for purchase, which is... | |
| The 818P-DIN Adapter Cable converts DB15 terminated 919P series thermopile detectors to 8-pin DIN for connection to Newport Cal-Module based optical power meters. Also compatible with the legacy 818P series... | |
| The 819-DA Detector Adapter allows 818 Series Photodiode Detectors to be connected to a 1 inch port of an 819 Series Integrating Sphere. It is not compatible with the 918D... | |
| The 819-PC-0.5 Port Flange Diameter Expander is used to expand a 1/2 inch port of an integrating sphere to 1 inch, so that 1 inch size sphere accessories can be... | |
| The 819-PC-0.5V2 (P/N 7Z08365N) Port Flange Diameter Expander is used to expand a 1/2 inch port of an integrating sphere to 1 inch, so that 1 inch size sphere accessories... | |
| The 819M-B-0.06-0.5 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1/2 inch to 1/16 inch. Flat Black. Comes with a... | |
| The 819M-B-0.12-0.5 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1/2 inch to 1/8 inch. Flat Black. Comes with a... | |
| The 819M-B-0.12-1.0 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1 inch to 1/8 inch. Flat Black. Comes with a... | |
| The 819M-B-0.25-0.5 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1/2 inch to 1/4 inch. Flat Black. Comes with a... | |
| The 819M-B-0.25-1.0 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1 inch to 1/4 inch. Flat Black. Comes with a... | |
| The 819M-B-0.50-1.0 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1 inch to 1/2 inch. Flat Black coating inside. Comes... | |
| The 819M-B-0.50-1.0V2 (P/N 7Z08363N) Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1 inch to 1/2 inch. Flat Black coating... | |
| The 819M-B-0.75-1.0 Port Reducer is used to reduce the port size of a 819C or 819D Series integrating sphere from 1 inch to 3/4 inch. Flat Black. Comes with a... | |
| The 819M-B-11-1.0 (P/N 7Z08288N)i s a C-mount (1-32 UN 2A) male adpater. The 11 mm clear aperture limits the field of the view of the device, increasing the measurement accuracy... | |
| The 819M-CM-1.0 is a female C-mount (1-32 thread) adapter mounted to the 1 inch port of the 819C or 819D series integrating spheres. The C-mount thread is commonly adopted in... | |
| The 819M-CV-0.5 (P/N 7Z08371N) Flat Black Coated Protected Cover is used to cover the 0.5" port for preventing dust and other contamination from entering the integrating sphere. With the flat-black... | |
| The 819M-CV-1.0 (P/N 7Z08282N) Flat Black Coated Protected Cover is used to cover the 1.0" port for preventing dust and other contamination from entering the integrating sphere. With the flat-black... | |
| The 819M-CV-1.5 (P/N 7Z08370N) Flat Black Coated Protected Cover is used to cover the 1.5" port for preventing dust and other contamination from entering the integrating sphere. With the flat-black... | |
| The 819M-CV-2.5 (P/N 7Z08281N) Flat-Black Coated Protected Cover is used to cover the 2.5" port for preventing dust and other contamination from entering the integrating sphere. With the flat-black coating... | |
| The 819M-DAT Detector Adaptor is used to attach an 818, 918, or 918D Series detector to the 1 inch port of an 819C/D Series integrating sphere. Inside has white diffuse... | |
| The 819M-DATV2 (P/N 7Z08366N) Detector Adaptor is used to attach an 818, 918, or 918D Series detector to the 1 inch port of an 819C/D Series integrating sphere. Inside has... | |
| The 819M-FC-0.5 Fiber Adaptor is a FC fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black coating on the back... | |
| The 819M-FC-1.0V2 Fiber Adaptor is a FC fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere. Flat Black coating is applied on... | |
| The 819M-G-0.50-1.0 Port Reducer is used to reduce the port size of a 819C or 819D Series gold integrating sphere from 1 inch to 1/2 inch. Diffuse gold coating inside. | |
| The 819M-LC-0.5 Fiber Adaptor is a LC fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black. Comes with a 1.5... | |
| The 819M-LC-1.0 Fiber Adaptor is a LC fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere. Flat Black. Comes with a 1.5... | |
| The 819M-PFR-1.0-1.5B Flat Black Port Frame Reducer mounts onto the 1.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port... | |
| The 819M-PFR-1.0-1.5BV2 (P/N 7Z08361N) Flat Black Port Frame Reducer mounts onto the 1.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for... | |
| The 819M-PFR-1.0-1.5G Gold Port Frame Reducer mounts onto the 1.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port sizes... | |
| The 819M-PFR-1.0-2.5 Port Frame Reducer mounts onto the 2.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port sizes to... | |
| The 819M-PFR-1.0-2.5B Flat Black Port Frame Reducer mounts onto the 2.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port... | |
| The 819M-PFR-1.0-2.5G Gold Port Frame Port Reducer mounts onto the 2.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port... | |
| The 819M-PFR-SF-1.5 Port Frame Reducer mounts onto the 1.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port sizes to... | |
| The 819M-PFR-SF-1.5V2 (P/N 7Z08362N) Port Frame Reducer mounts onto the 1.5 inches port frame to change the port frame to 1 inch diameter. This allows accessories designed for smaller port... | |
| The 819M-PP-0.5 (P/N 7Z08360N) Spectralon Coated Port Plug is for use on 1/2 inch ports of PTFE based 819C or 819D Series integrating spheres. It replaces the obsolete 819M-PP-SL-0.5. | |
| The 819M-PP-1.0 PTFE (spectralon) based Port Plug closes up a 1 inch port of the PTFE based 819C or 819D Series integrating spheres. PTFE is a thick, machined diffuse reflectance... | |
| The 819M-PP-1.5 (P/N 7Z08359N) Spectralon Coated Port Plug is for use on 1.5 inch ports of PTFE coated 819C or 819D Series integrating spheres. It replaces the obsolete 819M-PP-SL-1.5. | |
| The 819M-PP-2.5 PTFE based Port Plug plug up a 2.5 inch port of the PTFE based 819C or 819D Series integrating spheres. All 5.3 inch spheres have a 2.5 inch... | |
| The 819M-PP-GL-0.5 diffused gold Coated Port Plug is for use on 1/2 inch ports of diffused gold coated 819C or 819D Series integrating spheres. | |
| The 819M-PP-GL-1.0 Diffuse Gold Coated Port Plug is for use on 1 inch ports of diffuse gold coated 819C or 819D Series spheres. Tighten with two M3 size set screws... | |
| The 819M-PP-GL-1.5 Diffuse Gold Coated Port Plug is for use on 1.5 inch ports of diffuse gold coated 819C or 819D Series spheres. Tighten with two M3 size set screws... | |
| The 819M-PP-GL-2.5 Diffuse Gold Coated Port Plug is for use on 2.5 inch ports of diffuse gold coated 819C or 819D Series spheres. Tighten with two M3 size set screws... | |
| The 819M-PP-SF-0.5 Spectraflect Coated Port Plug is for use on 1/2 inch ports of PTFE coated 819C or 819D Series integrating spheres. | |
| The 819M-PP-SF-1.0 Spectraflect Coated Port Plug is for use on 1 inch ports of barium sulfate coated 819C or 819D Series integrating spheres. | |
| The 819M-PP-SF-1.5 Spectraflect Coated Port Plug is for use on 1.5 inch ports of barium sulfate coated 819C or 819D Series integrating spheres. | |
| The 819M-PP-SF-2.5 Spectraflect Coated Port Plug is for use on 2.5 inch ports of barium sulfate coated 819C or 819D Series integrating spheres. | |
| The 819M-PP-SL-1.5 Spectralon Coated Port Plug is for use on 1.5 inch ports of PTFE coated 819C or 819D Series integrating spheres. | |
| The 819M-SAM-1.0 Sample Holder attaches to a 1 inch port on a 819C or 819D Series integrating sphere. It holds the sample external to the integrating sphere. | |
| The 819M-SM1-1.0 is an adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere with the SM1 (1.035-40) thread. Use this part to connect... | |
| The 819M-SMA-0.5 Fiber Adaptor is a SMA fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black. Comes with a 1.5... | |
| The 819M-SMA-0.5G Fiber Adaptor is a SMA fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Diffused Gold. Comes with a 1.5... | |
| The 819M-SMA-0.5V2 (P/N 7Z08364N) Fiber Adaptor is a SMA fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black. Comes with... | |
| The 819M-SMA-1.0G Fiber Adaptor is a SMA fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere. Diffused Gold. Comes with a 1.5... | |
| The 819M-SMA-1.0V2 Fiber Adaptor is a SMA fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere, either PTFE (spectralon) or barium sulfate... | |
| The 819M-ST-0.5 Fiber Adaptor is a ST fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black. Comes with a 1.5... | |
| The 819M-ST-1.0 Fiber Adaptor is a ST fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere. Flat Black. Comes with a 1.5... | |
| The 8725 Multi-Axis Adapter adapts multi-axis Picomotor™ devices with RJ-11 (6 pin) connector cables for use with drivers. Comes with 1 x RJ-11 (6 pin) jack and 3 x RJ-22... | |
| The 8745-MTG-KIT includes the mounting plate along with 1/4-20 screws for the 874X Controller/Driver to be securely fastened to a non-metric optical table surface. The mounting plate allows the controller/driver... | |
| The 8745-PS Controller/Driver Power Supply is used for powering the 4-axis 8742 and 8743-CL modules. | |
| The 8745-PWR-CBL Power Cable is used for linking multiple 8742 and 8743-CL modules in power. It is six inches in length. | |
| The 8745-RS485-CBL RS-485 Cable is used for linking 8742 and/or 8743-CL modules to each other. It is six inches in length. | |
| The 8745-STK-KIT includes a mounting bracket and screws for stacking multiple 8742 and 8743-CL modules. | |
| The 8745-USB-CBL USB Cable is used for connecting 8742 and 8743-CL modules to your computer for control. It is three meters in length. | |
| The 8758-MTG-KIT provides the mounting plate along with 1/4-20 screws for the model 8758 Hand control pad to be securely fastened to a non-metric optical table surface. | |
| The 883-OH is a general purpose 1 inch optic holder for the Newport photodiode detectors. Any 1inch diameter filter or lens with up to 0.35 inch thickness can be accommodated. | |
| The 884-E2000FC Fiber Adapter accommodates optical fibers terminated with the Diamond’s E-2000™ PC fiber connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. | |
| The 884-FC Fiber Adapter accommodates optical fibers terminated with FC/PC connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The fiber connector is... | |
| The 884-FCA Fiber Adapter accommodates optical fibers terminated with FC/APC connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The fiber connector is... | |
| The 884-IGR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-IG series detector to attenuate the input beam. It is the RoHS compliant version of... | |
| The 884-IRR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-IR series detector to attenuate the input beam. It is the RoHS compliant version of... | |
| The 884-SLR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-SL series detector to attenuate the input beam. It is the RoHS compliant version of... | |
| The 884-SMA Fiber Adapter accommodates optical fibers terminated with SMA connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The fiber connector is... | |
| The 884-UDAPT is an adapter with an Oriel's 1.5 inch series female flange and for Newport's 1 inch LensTube lens holders (1.035-40 thread). Compatible with the following photodiode detectors: 818-xx-L,... | |
| The 884-UVR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-UV series detector to attenuate the input beam. It is the RoHS compliant version of... | |
| The 90017470 USB 2.0 Cable has a 40 inch length and a Type A connector on one end and a Type B connector at the other end. RoHS compliant. It... | |
| The 90019426 Male to Male BNC Cable has a 60 inch length. | |
| The 90021186 USB 2.0 Cable has a 24 inch length and a right angle Type A connector on one end and a right angle Type B connector at the other... | |
| The 9092 Coupler Body attaches to the Model 9091or Model 9051 fiber aligners so you can mount optical elements directly to the aligner. The coupler body is designed to hold... | |
| The 9092-M Coupler Body attaches to the Model 9091-M or Model 9051-M fiber aligners so you can mount optical elements directly to the aligner. The coupler body is designed to... | |
| The 9096 Fiber Bracket is based upon feedback from our own fiber-optic engineers. With four bulkhead FC input connectors, the Model 9096 gives you quick, convenient, and secure couplings between... | |
| The 91150-KG5 Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2... | |
| The 91150V Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2... | |
| The 9123NF Objective Holder is used for free-space to fiber alignment. The objective holder attaches to a standard RMS-threaded microscope objective or an aspheric lens (in an asphere adapter) for... | |
| The 9126 ST Fiber Adapter is used for mounting an ST connectorized fiber to the Model 9091 fiber positioner. | |
| The 9127NF FC Fiber Adapter is used for mounting an FC connectorized fiber to the Model 9091 fiber positioner. | |
| The 9141-M Pedestal Clamp lets you vary the height of your optical mounts, without having to give up the stability of our pedestal risers. These clamps are perfect for building... | |
| The 9141NF Pedestal Clamp lets you vary the height of your optical mounts, without having to give up the stability of our pedestal risers. These clamps are perfect for building... | |
| The 918D-BASE-KITR Base Mounting Kit is for 918D Series Photodetectors It is made of Anodized Aluminum with mounting flanges and is RoHS compliant. | |
| The 919P-18FA Fiber Adapter Mounting Ring accommodates the 919P-FC or 919P-SMA fiber adapter to the model. | |
| The 919P-26FA Fiber Adapter Mounting Ring accommodates the 919P-FC or 919P-SMA fiber adapter to the model. | |
| The 919P-35FA Fiber Adapter Mounting Ring accommodates the 919P-FC or 919P-SMA fiber adapter to the model. | |
| The 919P-50FA Fiber Adapter Mounting Ring accommodates the 919P-FC or 919P-SMA fiber adapter to the model. | |
| The 919P-BNC (P/N 7Z11057), replacing the obsolete 818P-BNC, converts DB15 terminated optical detectors to BNC for connection to a digital voltmeter (DVM) or an oscilloscope. This part is ideal for... | |
| The 919P-FC Fiber Adapter accommodates optical fibers terminated with FC/PC connectors for 919P series thermopile detectors. It has an M20X1 thread. Use it along with the various diameter adapter mounting... | |
| The 919P-SMA Fiber Adapter accommodates optical fibers terminated with SMA connectors for 919P series thermopile detectors. It has an M20X1 thread. Use it along with the various diameter adapter mounting... | |
| The 9904 Magnetic Pedestal Base gives you the convenience of a magnetic base with the same stability and low beam height of our pedestal risers. It is great in applications... | |
| The 9909 stainless steel clamping fork is unique because the cap-head screw is held captive in the slot of the fork so that it can't fall out. Think about how... | |
| The 9909-M stainless steel clamping fork is unique because the cap-head screw is held captive in the slot of the fork so that it can't fall out. Think about how... | |
| The 9910 Pedestal Base Adaptor gives you the flexibility of an adjustable-height post system, but like the versatility of our forks, use this Model 9910 base with your post holders. | |
| The 9911 Post Clamp fastens a mount at any angle to a 1/2 in. (12.7 mm) diameter post. A single screw fastens all parts. The 9911 has thru holes for... | |
| The 9912 Baseplate makes it easy to reach a mounting hole on a conventional optical table that has 1 in. or 25 mm mounting-hole arrays. The Model 9912 has extra-long... | |
| The 9914 Baseplate makes it easy to reach a mounting hole on a conventional optical table that has 1 in. or 25 mm mounting-hole arrays. The Model 9914 has extra... | |
| The 9915 Baseplate makes it easy to reach a mounting hole on a conventional optical table that has a 1.25 in. or 31.8 mm mounting-hole array. | |
| The 9916 stainless steel clamping fork is unique because the cap-head screw is held captive in the slot of the fork so that it can't fall out. Think about how... | |
| The 9917 Post Clamp fastens a mount at any angle to a 1/2 in. diameter post. A single screw fastens all parts. The 9917 has threads for mounts with 8-32... | |
| The 9917-M Post Clamp fastens a mount at any angle to a 12.7 mm diameter post. A single screw fastens all parts. The 9917 has an M4 thread. | |
| The 9918 Baseplate makes it easy to reach a mounting hole on a conventional optical table that has a 2.25 in. or 57.2 mm mounting-hole array. | |
| The 9930 Post Clamp fastens a mount at any angle to a post. Separate adjustment and clamp screws allow you to adjust the position of the mirror without loosening the... | |
| The 9930-M Post Clamp fastens a mount at any angle to a post. Separate adjustment and clamp screws allow you to adjust the position of the mirror without loosening the... | |
| The 9934 Nu™ Post Collar's open design lets you add a post collar anytime, even after you've aligned your optics. Slip the collar on the post and you can use... | |
| The 9935 Right-Angle Post Clamps lets you cantilever a post at 90° to the table or mount two 1/2 in. posts at right angles to each other. | |
| The 9936 Swivel Post Clamp allows you to orient two posts at any angle to one another. It is just another convenient product for solving everyday lab dilemmas. | |
| The 9940 Flex-Lock Post is perfect for holding an IR viewer or camera at any location, leaving your hands free to do your experiment. The Model 9940 can support more... | |
| The 9940-M Flex-Lock Post is perfect for holding an IR viewer or camera at any location, leaving your hands free to do your experiment. The Model 9940 can support more... | |
| The 9950 Optical Pedestal Spacer Set lets you reach those in-between heights, while retaining all the stability of our fixed-height mounting scheme. The set includes three 0.25 in. (6.35 mm)... | |
| The 9959-M Fixed Stainless Steel Pedestal Riser has a M6 tapped hole on top and a M4 tapped hole on the bottom. It is great for mounting post holders for... | |
| The 9959NF Fixed Stainless Steel Pedestal Riser has a 1/4-20 tapped hole on top and an 8-32 tapped hole on the bottom. It is great for mounting post holders for... | |
| The AC0.5 optical post collar when used with the PMC1.0 post holder collar allows for precision height adjustment of an optical post mounted in a VPH post holder. A notch... | |
| The AC0.5-PK ajustable hight optical post collar pack contains five AC0.5 post collars. The AC0.5 when used with the PMC1.0 post holder collar allows for precision height adjustment of an... | |
| The all new FP4-COL-1550 Fiber Adapter Core collimates the laser beam from a fiber tip so that the beam does not overfill the active area of the 818 and 918D... | |
| The APEX2-CS1-KIT is a mounting kit used to couple the Apex2 Illuminator to an Oriel® CS130B Monochromator. The Monochromator is positioned at the correct height and distance from the... | |
| The APEX2-CS2-KIT is a mounting kit used to couple the Apex2 Illuminator to an Oriel® CS260 Monochromator. The Monochromator is positioned at the correct height and distance from the... | |
| The APEX2-MS1-KIT is a mounting kit used to couple the Apex2 Illuminator to an Oriel® MS257 Monochromator. The Monochromator is positioned at the correct height and distance from the... | |
| The AS-1568 Accessory Shelf mounts below the work table for out of the way storage of bulky items like lasers and power supplies. Designed with robust, two-inch thick honeycomb paneling,... | |
| The B320-ACC-001 is a square adaptor bottom plate used to mount VIB320 Series isolators to an optical table or frame structure. Includes 4 screws for mounting plate to isolator. | |
| The B320-ACC-002 is a round adaptor bottom plate used to mount VIB320 Series isolators to an optical table or frame structure. Includes 4 screws for mounting plate to isolator. | |
| The B320-ACC-003 is a rectangular adaptor bottom plate used to mount VIB320 Series isolators to an optical table or frame structure. Includes 4 screws for mounting plate to isolator | |
| The B320-ACC-019 is a 1/4-20 x 1'' stud that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another plate or... | |
| The B320-ACC-020 is a 3/8-16 x 1.25'' stud that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another plate or... | |
| The B320-ACC-021 is a M6 x 25 mm stud that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another plate... | |
| The B320-ACC-022 is a M10 x 32 mm stud that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another plate... | |
| The B320-ACC-023 is a 1/4-20 x 1'' threaded leveler bar that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another... | |
| The B320-ACC-024 is a 6 mm threaded leveler bar that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another plate... | |
| The B320-ACC-025 is a slotted universal leveler bar that can be mounted on top of the VIB320 Series isolator, so that the isolator can be attached to another plate or... | |
| The BF-820 Bare Fiber Holder is compatible with both ILX Lightwave® and Agilent adapter rings and is designed to hold and position a common telecom fiber. Inside the BF-820,... | |
| The BSJ1 features a ball and socket mechanism that allows a large range of angular adjustment for optical component mounts. The single locking set screw securely locks the mount in... | |
| The BSJ2 features a ball and socket mechanism that allows a large range of angular adjustment for optical component mounts. The single locking set screw securely locks the mount in... | |
| The C-0.3 Miniature Post Collar provides an index point for a specific post height, allowing a 0.313 in. (7.9 mm) post to be removed from a post holder and returned... | |
| The C-0.5 Post Collar provides an index point for a specific post height, allowing a 1/2 in. (12.7 mm) diameter post to be removed from a post holder and returned... | |
| The C-1P C-Clamp is a multifunction post clamp which can interface optic mounts to a 1.0 in. diameter optical post. The open side of the C-clamp means it can be... | |
| The CA-1 Right-Angle Post Clamp mounts two SP Series 1/2 in. (12.7 mm) posts at 90° to each other. The clamping screws permit fast, secure post mounting with only moderate... | |
| The CA-2 Adjustable-Angle Post Clamp holds two SP Series 1/2 in. (12.7 mm) posts, at an arbitrary angle with respect to each other. Both posts are tightened simultaneously with the... | |
| The CA-T In-Line T Post Clamp holds (2) 1/2 in. (12.7 mm) SP Series posts in a T configuration. | |
| The CA100 FC Fiber Optic Connector Adapter accommodates optical fibers terminated with FC connectors. The CA100 is compatible with the following ILX Lightwave® optical power and fiber optic power... | |
| The CA120 Bare Fiber Adapter Ring Adapter is required to interface the patented ILX Lightwave® to the following ILX Lightwave® optical power and fiber optic power meter measurements... | |
| The CA150 SC Fiber Optic Connector Adapter accommodates optical fibers terminated with SC connectors. The CA150 is compatible with the following ILX Lightwave® optical power and fiber optic power... | |
| The CA20001 LC Fiber Optic Connector Adapter accommodates optical fibers terminated with LC connectors. The CA20001 is compatible with the following ILX Lightwave® optical power and fiber optic power... | |
| The CA250 Bare FC Ferrule Fiber Optic Connector Adapter accommodates optical fibers terminated with Bare FC Ferrule connectors. The CA-250 is compatible with the following ILX Lightwave® optical power... | |
| The CBL-CSMS-FW is a ribbon cable used to connect a filter wheel to the Oriel® CS130B and CS260B monochromators, as well as the legacy MS260i imaging spectrograph and legacy... | |
| The CBL-MS257-FW is a ribbon cable used to connect a filter wheel to the Oriel® MS257 monochromator and imaging spectrograph. The instrument provides power as well as control to... | |
| The CC-320 Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC-320 cable uses 10 gauge wire for current capacities up to 40A... | |
| The CC-325 Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC-325 cable uses 10 gauge wire for current capacities up to 40A... | |
| The CC-340 Current Source Interconnect cable is designed to carry high current to high power laser diodes. The cable is ideal for QCW applications with low inductance for clean pulses... | |
| The CC-355S Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the... | |
| The CC-370 Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC370 cable used 8 gauge wire for increased current capacity and is... | |
| The CC05 can be used to secure prisms, mirror mounts and other devices. The clamp mount attaches to a Ø1/2 inch optical posts and has both 1/4-20 and 8-32 threaded... | |
| The CC305H Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the... | |
| The CC305S Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the... | |
| The CC306H Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the... | |
| The CC306HT Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the... | |
| The CC306S Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the... | |
| The CC308H Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC-308H cable uses 16 gauge wire for increased current capacity. The cable... | |
| The CC316M Laser Current Cable Bundle is a set of eight twisted-pair cables with braided outer shields. The cable composition is identical to the ILX Lightwave® standard CC-305S Current... | |
| The CC380 is an interconnect cable between the LDP-3840B pulsed laser diode driver and the LPB-380 Laser Mounting Board. This cable was designed as a low characteristic impedance cable specifically... | |
| The CC385 interconnect cable is specifically designed to connect the LDP-3830 Pulsed Current Source to the LPB-386 pulse board. The impedance of the cable matches the LDP-3830 and the LPB-386... | |
| The CC390 Interconnect cable is a flat copper cable for carrying high CW and QCW current to high power laser diodes. The flat cable is ideal for QCW applications with... | |
| The CC395 Interconnect cable is a flat copper cable for carrying high CW and QCW current to high power laser diodes. The flat cable is ideal for QCW applications with... | |
| The CC501H Low Resistance, High Current TEC Interconnect Cable is a twisted pair cable with braided shielding to help minimize noise generation and reception. The CC501H cable uses larger gauge... | |
| The CC501HT TE Interconnect Cable is designed for use with most of the ILX Lightwave® precision temperature controllers and high power mounts. Twisted pair signal wires and braided shielding... | |
| The CC501S TE Controller/Laser Diode Mount Interconnect Cable is the temperature controller complement to ILX's CC306S laser current source cable. Twisted pair signal wires and braided shielding help minimize noise... | |
| The CC505S TE Controller/Laser Diode Mount Interconnect Cable is the temperature controller complement to ILX's CC305S laser current source cable. Twisted pair signal wires and braided shielding help minimize noise... | |
| The CC516M TE Controller Cable Bundle is a set of eight twisted-pair cables with braided outer shields. The cable composition is identical to the ILX Lightwave® standard CC505S TE... | |
| The CC550S TE Controller/Laser Diode Mount Interconnect Cable is the temperature controller complement to ILX's CC355S laser current source cable. Twisted pair signal wires and braided shielding help minimize noise... | |
| The CC594H TE Controller Unterminated Interconnect Cable is designed for use with the ILX Lightwave® LDT-5940C and LDT-5900 Series Precision Temperature Controllers and non-ILX or user-designed fixtures. Twisted pair... | |
| The CC595S TE Controller/Laser Diode Mount Interconnect Cable is designed to interface between the ILX Lightwave® LDT-5940C and LDT-5900 series Precision Temperature Controllers and Laser Diode Mounting Fixtures. Twisted... | |
| The CC596H TE Controller Interconnect Cable is designed for use with the ILX Lightwave® LDT-5940C or LDT-5900 Series Precision Temperature Controllers and various ILX laser diode mounts. Twisted pair... | |
| The CMS Cable Management System secures cabling in a foam grip and can mount to the breadboard or frame. When used with a proper service loop in the cable, most... | |
| The CONEX-BP Base Plate is used to securely mount up to 6 CONEX-CC or up to 3 CONEX-PP motion controllers to an optical table. | |
| The CONEX-PS is a 24 VDC power supply for CONEX™ devices. Power can be shared by modules using the optional CONEX-PS-CB power chain cable. | |
| The Conex-PS-CB is used for daisy-chaining modules and is included in every CONEX™ CC controller. Power supply to be ordered separately. | |
| The DET-L-GE-R-C Germanium Photovoltaic Detector for LIDA™ houses an unbiased, photovoltaic mode operated photodiode coupled to a trans impedance amplifier. The internal 5 mm diameter active area Germanium photodiode and... | |
| The DET-L-GE-T-C Germanium Photovoltaic Detector for LIDA™ houses an unbiased, photovoltaic mode operated photodiode coupled to a trans impedance amplifier. The internal 5 mm diameter active area Germanium photodiode with... | |
| The DET-L-PBS-R-U detector for LIDA™ houses a Lead sulfide detector w/integrated voltage supply and AC coupled pre-amplifier. The integrated power supply provides a 100 V bias of the PbS detector... | |
| The DET-L-PYC5-R-P detector for LIDA™ houses a lithium tantalate pyroelectric detector with an integrated FET amplifier and signal processing circuitry. Typical pyroelectric detectors have an output which decreases with increasing... | |
| The DET-L-PYK5-R-P detector for LIDA™ houses a lithium tantalate pyroelectric detector with an integrated FET amplifier and signal processing circuitry. Typical pyroelectric detectors have an output which decreases with increasing... | |
| The DET-L-SIUV-R-C Silicon Photovoltaic Detector for LIDA™ houses an unbiased, photovoltaic mode operated photodiode coupled to a trans impedance amplifier. The internal 10 mm x 10 mm active area, UV-enhanced... | |
| The DET-L-SIUV-T-C Silicon Photovoltaic Detector for LIDA™ houses an unbiased, photovoltaic mode operated photodiode coupled to a trans impedance amplifier. The internal 5 mm diameter active area, UV-enhanced Silicon photodiode... | |
| The DJP-1, Double-Jointed Utility Post, made with genuine parts from RAM Mounts®, allows positioning flexibility for post mounting of various mechanical and optical devices. It has two ball-and-socket arms, each... | |
| The E5820A XPS-D Encoder Adapter converts a DB15-style calibration module to HD26. This adapter is for use with the VP-25XL & ONE-XY series stages when driven by an XPS-D or... | |
| The E5990A Motor Adaptor is used to connect the IDL165-LM motorized stage to the XPS-DRV11 driver card. | |
| The ERS2010-1-KT-A Earthquake restraint mounting kit includes hardware and epoxy needed to install 1 earthquake restraint. This hardware kit consists of 1 ea. HILTI HIT-RE 500-SD Epoxy Adhesive, 8 ea. | |
| The ERS2010-1-KT-B Earthquake restraint mounting kit includes hardware needed to install 1 earthquake restraint. This hardware kit consists of 8 ea. HILTI HIS 3/8" Threaded sleeve, 8 ea. Hex bolts... | |
| The ERS2010-116 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-116 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-119.5 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-119.5 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-122 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-122 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-123.5 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-123.5 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-128 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-128 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-3-KT Earthquake restraint mounting kit includes hardware and epoxy adhesive needed to install 3 earthquake restraints. This hardware kit consists of 1 ea. HILTI HIT-RE 500-SD Epoxy Adhesive, 24... | |
| The ERS2010-316 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-316 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-319.5 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-319.5 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-322 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-322 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-323.5 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-323.5 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-328 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-328 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-4-KT Earthquake restraint mounting kit includes hardware and epoxy adhesive needed to install 4 earthquake restraints. This hardware kit consists of 1 ea. HILTI HIT-RE 500-SD Epoxy Adhesive, 32... | |
| The ERS2010-416 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-416 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-419.5 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-419.5 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-422 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-422 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-423.5 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-423.5 is rated for seismic forces generated by a maximum of... | |
| The ERS2010-428 Earthquake Restraint system is designed to restrict the motion of optical table top during seismic activity. Model ERS2010-428 is rated for seismic forces generated by a maximum of... | |
| The ESP302-CAB-1.2 is a 1.2 m cable adapter for the 15-pin D-SUB-HD COMM. connector of the ESP302, that converts the signals to a 9-pin D-SUB RS232 serial port connection. It... | |
| The ESP302-GPIB-ADPT GPIB to Serial adapter is an add-on to be used with ESP302 controller and permits communication from customer's GPIB controller to the ESP302 serial interface. An cable (sold... | |
| The ESP302-J digital joystick provides convenient manual jog control. It requires the ESP302 3-axis motion controller and driver if 3-axis control is required. It can be used with the 2-axis... | |
| The ESP302-RS232 is an adapter for the 15-pin D-SUB-HD COMM. connector of the ESP302, that converts the signals to a 9-pin D-SUB RS232 serial port connection. See section 6.3.1 in... | |
| The F-AMP-SM is a high-gain pre-amplifier module in a multiple source agreement footprint housing. It is an easy-to-use and cost-efficient solution for photonic subsystems, OEM integration, and fiber optic system... | |
| The FC-1 Filter Clamp is convenient for holding thin objects such as optical filters, transparencies or even razor blades used as knife edges. A 1/4-20 set screw may be threaded... | |
| The FP3-FH1 Bare Fiber Holder is a cleverly designed fiber clamp that is used to hold 250 μm bare fibers without damaging the fiber. It in turn plugs into the... | |
| The FP3-SMA Fiber Connector Adapters accommodates optical fibers terminated with SMA connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and... | |
| The FP4-FC Fiber Connector Adapter accommodates optical fibers terminated with FC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and... | |
| The FP4-LC Fiber Connector Adapter accommodates optical fibers terminated with LC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and... | |
| The FP4-SC Fiber Connector Adapter accommodates optical fibers terminated with SC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and... | |
| The FP4-ST Fiber Connector Adapter accommodates optical fibers terminated with ST connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and... | |
| The HIGHRES-1 resolution test target is an optical quartz substrate with clear lines on an opaque background (negative). It is used in transmission and is easily held in M-PPF50 optical... | |
| The HIGHRES-2 resolution test target is an optical quartz substrate with opaque lines on a clear background (positive). It is used in transmission and is easily held in M-PPF50 optical... | |
| The ID-0.5 Iris Diaphragm uses 10 leaves to provide a continuously variable 1 to 11 mm aperture for applications including setting the numerical aperture of a lens, controlling or measuring... | |
| The ID-0112SM1 iris diaphragm is SM1-threaded for use with opto-mechnical components with 1.035-40 thread. The ring-actuated iris diaphragm is low profile with no lever sticking up that could lead to... | |
| The ID-0112SM1G iris diaphragm is graduated version of ID-0112SM1. It is compatible with most opto-mechnical components with 1.035-40 thread. The graduations allow the user to determine the size of the... | |
| The ID-0125SM2 iris diaphragm is SM2-threaded for use with opto-mechnical components with 2.035-40 thread. The ring-actuated iris diaphragm is low profile with no lever sticking up that could lead to... | |
| The ID-1.0 Iris Diaphragm uses 14 leaves to provide a continuously variable 1.5 to 25 mm aperture for applications including setting the numerical aperture of a lens, controlling or measuring... | |
| The ID-1.5 Iris Diaphragm uses 18 leaves to provide a continuously variable aperture for applications including setting the numerical aperture of a lens, controlling or measuring the intensity of a... | |
| The ILS300LM-CF is a Flat Cable carrier for the ILS300LM. Choose this carrier type if a lower height and mounting the load flushed to the top surface of the stage... | |
| The ILS300LM-CFXY is a Flat Cable carrier for an ILS300LM XY configuration. Choose this carrier type if a lower height and mounting the load flushed to the top surface of... | |
| The ILS300LM-CH is a Chain-type Cable carrier for the ILS300LM. | |
| The ILS300LM-CHXY is a Chain-type Cable carrier for an ILS300LM XY configuration. | |
| The IMSLMC Cable Chain is used for routing cables to the stationary base of an IMS stage ( (300, 400, 500 and 600mm). . Call tech support for XY assemblies. | |
| The IMSLMC2 Cable Carrier Chain is used for routing cables to the stationary base of the long travel IMS stage (800, 1000 and 1200mm). For XY assemblies, call tech support. | |
| The Model 75160NF Optical Chopper is used to introduce a periodic interruption of a light path in an optical experiment resulting in an amplitude modulation, which is useful for many... | |
| These 77321 Focusing Spacer Tube Lens Kit consists of a spacer tube and a Fused Silica plano convex lens. Use it in conjunction with the 77258 to focus collimated light... | |
| This is a 10-pack of the Post Collar. The cost-saving C-0.5-PK Post Collar Pack of 10 provides an index point for a specific post height, allowing a 1/2 in. (12.7... | |
| This is a 6-pack of the Iris Diaphragm. The ID-0.5 Iris Diaphragm uses 10 leaves to provide a continuously variable 1 to 11 mm aperture for applications including setting the... | |
| This is a 6-pack of the Iris Diaphragm. The ID-1.0 Iris Diaphragm uses 14 leaves to provide a continuously variable 1.5 to 25 mm aperture for applications including setting the... | |
| This is a 6-pack of the Iris Diaphragm. The ID-1.5 Iris Diaphragm uses 18 leaves to provide a continuously variable aperture for applications including setting the numerical aperture of a... | |
| When requesting a quote for this proprietary filter, please have your Newport Oriel solar simulator model number and serial number ready for ordering. Contact your Newport sales representative for more... |
| Next >> |