OMEGA Engineering, Inc. Datasheets for Thermistor Temperature Probes
Thermistor temperature probes sense temperature by using thermistors, devices made of semiconductor materials which exhibit a large change in resistance for a small change in temperature.
Thermistor Temperature Probes: Learn more
| Product Name | Notes |
|---|---|
| 300 Series Stainless Steel Probe is 4.5" Long and 1/8" in Diameter with a Transition and Strain Relief Spring for Rugged Duty Liquid Immersion Use | |
| An economical and accurate thermistor (2252 ohm @ 25C) probe with an easy-grip molded handle, 3/16" dia. and 1' retractable cable. The 12" length probe can be stored in toolboxes... | |
| Extremely Sensitive Sensor with Thin Cross-Section Tip Combined and Ultra-Small Diameter Extension Sheath | |
| Ideally Suited for Applications Such as Determining Heat Loss, Compressor Efficiency and Measureing Manufold Temperature | |
| Linear Banjo Thermistor Sensor | |
| Linear Immersion Thermistor Sensor | |
| Linear Tubular Glass Thermistor Sensor | |
| OMEGA ENGINEERING Series "400" probes are for use in laboratory and R&D applications and have interchangeable sensor accuracy of 0.1C. Each sensor is supplied with a 10-foot vinyl cable and... | |
| OMEGAs VIPs (Veterinary Implantation Probes) are designed for continuous monitoring of animal rectal temperatures. Unique construction makes them flexible enough that they do not cause undue animal discomfort while inserted,... | |
| Precision Interchangeable Thermistor | |
| Pyrex Probe is 5" Long and 3/16" Diameter with Stainless Steel Transition to 120" (3 meters) of PVC Cable and Phone Plug Connector | |
| Series 700 Linear Response probe assemblies are fitted with precision 44018 linear thermistor elements rated to 100C (212F). Each is supplied with 10 feet of vinyl covered lead wire. A... | |
| Series 700 Linear Response probe assemblies are fitted with precision 44018 linear thermistor elements rated to 100C (212F). Each is supplied with 3 meters (120") of PVC cable. A three... | |
| Series 700 Temperature Probes with 3 stripped leads use the 44018 thermistor composite as the linear temperature sensor. On special order, probes can also be built with 44019 thermistor composite. | |
| The 3-A Approved OMEGA® THS-S-M12 and THS-H-M12 Series Thermistor Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors... | |
| The 3-A Approved OMEGA® THS-S-NB9W and THS-H-NB9W Series Thermistor Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors... | |
| The OMEGA® THS-S-CB and THS-H-CB Series Thermistor Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These sensors are manufactured... | |
| The THX-400-GP probe sutable for use with an HDX handle is ideal for general purpose immersion measurement in gases and liquids. Made from a rugged 1/8" (3.1 mm) O.D. 304... | |
| The exposed thermistor element with protective cage design makes this an ideal selection for the measurement and control of air and gas streams in a variety of applications. The protective... | |
| The general purpose transition joint probe style is now available with any of our 44000 series thermistors as sensing elements. The probe transitions to 36" of PFA-insulated two-conductor lead wire... | |
| The Model ON-401-PP is a PVC Insulated and Jacketed Sensor for Use in Short-Term Water or Sub-Soil Readings. This is the Most Rugged Waterproof Construction. | |
| The threaded housing on this sensor allows for installation anywhere where a #8-32 hole is available. Its small size requires a minimum amount of space allowing installation into applications where... | |
| These sensors are designed to be conveniently mounted directly into ports with 1/8NPT or 1/4NPT threads. The housings are machined from 300 Series Stainless Steel, contain a stainless steel strain... | |
| These surface mount thermistor sensors have an adhesive surface on the bottom of the sensor. Just remove the peel strip and apply to any dry, solid surface. These sensors are... | |
| This air-flow sensor is designed to satisfy the many requirements of air temperature measurement and controll in air conditioning systems. The flange provided lends itself to easy mounting in Duct... | |
| This general purpose thermistor probe has a stainless steel sheath sealed at the tip for direct immersion into process liquids. The straight sheath design, with 40 inches of extension cable,... | |
| This sensor is desighed to be used in immiersion applications where it will be mounted into a process or pressure vessel using a 1/8NPT threaded port. The integral connector and... | |
| This sensor is designed for applications where the sensor needs to be immersed into a process and mounted using a 1/8NPT mounting thread. The sensor is protected by a 300... | |
| This surface sensor is designed for a variety of temperature measurement applications. It represents a low-cost, fast response sensor and lends itself to easy mounting on flat surfaces. | |
| This Thermistor Sensor Includes Two Thermistor Elements That When Used With a Resistor Set Will Provide Linearized Resistance Output Over a Specific Temperature Range | |
| THX-700 probes are designed to work with the heavy duty HDX handle. Each probe has a 3-prong OTP-copper connector termination and precision 44018 linear thermistor element, rated up to 212F... | |
| Tubular Thermistor Sensor | |
| This sensor design is ideally suited for animal and biological studies, geographic and oceanographic applications, and wherever a rugged thermistor sensor is needed. |