Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
590
600
610
620
630
640
648
649
650
651
652
653
654
655
656
657
658
659
660
670
680
690
700
710
720
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Aerospace series - Acrylonitrile-butadi ene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD | |
| Aerospace series - Acrylonitrile-butadi ene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD | |
| Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <= a <= 6 mm | |
| Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D < 160 mm | |
| Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm <= a <= 6 mm | |
| Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification | |
| Aerospace series - Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads | |
| Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature) /650... | |
| Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at... | |
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 \xb0C | |
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength class: 1100 MPa (at ambient temperature) | |
| Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 \xb0C | |
| Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 \xb0C | |
| Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa / 650 \xb0C | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90\xb0, unsealed with clamp strain relief for EN 2997... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 006: Cable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 007: Cable outlet, self-locking, style C, 90\xb0, shielded (cone grounding), unsealed with clamp strain... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 008: Cable outlet, self-locking, style C, 45\xb0, shielded (cone grounding), unsealed with clamp strain... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 009: Cable outlet, style J, straight, sealed, for heat shrinkable boot - Product standard... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 011: Cable outlet, style K, 90\xb0, shielded, sealed, for heat shrinkable boot - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 012: Grommet nut, style A for EN 3372 - Product standard | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 014: Cable outlet, style A, 90\xb0, unsealed, with cable tie strain relief - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45\xb0, unsealed, with cable tie strain relief - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 016: Grommet nut, style A, self-locking and non self-locking for EN 3645 - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 018: Cable outlet, style A, 90\xb0, unsealed, with cable tie strain relief - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 019: Cable outlet, style A, 45\xb0, unsealed, with cable tie strain relief - Product... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 021: Cable outlet, style A, 90\xb0, unsealed, self-locking with clamp strain relief for EN... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 022: Cable outlet, style A, straight, composite, unsealed, with cable tie strain relief -... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 023: Cable outlet, style A, 90\xb0, composite, unsealed, with cable tie strain relief -... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 024: Grommet nut, style A, composite - Product standard | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 026: Cable outlet, style A , 90\xb0, unsealed, with cable tie strain relief for... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 027: Cable outlet, style A, 45\xb0, unsealed, with cable tie strain relief for EN... | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 036: spacer pad for cable outlet, style Z - Product standard | |
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 037: bushing strip, elastomer, for cable outlet, style Z Product standard | |
| Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test | |
| Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 002: General | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 003: Single braid - 77 Ohms - Type KG - Product standard | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard | |
| Aerospace series - Cable, electrical, for digital data transmission - Part 012: Single braid - Star Quad 100 ohms - 260 \xb0C - Type KH - Product standard | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401: Accelerated ageing | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407 : Flammability | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheat and jacket material | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801: Capacitance per unit length | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804: Velocity of propagation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation | |
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR) | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus bar version - Product standard | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 ln/1 000 A max. - Part 003: Metric thread terminals - Product... | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 ln/1 000 A max. - Part 004: UNC thread terminals - Product... | |
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65ln/1 000 A max. - Part 001: Technical specification | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A- Part 006: With polarized signal contact - Bus-bar version - Product standard | |
| Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 ln - Part 003: Metric thread terminals - Product standard | |
| Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 \xb0C continuous - Part 002: List of product standards | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 \xb0C continuous - Part 003: Plug connector for cable according to EN 4532, product standard... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 \xb0C continuous - Part 004: Receptacle, connector, four hole fixing cable according to EN 4532,... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 \xb0C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532,... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 \xb0C continuous - Part 006: Receptacle, connector, jam nut fixing for cable according to EN... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 001: Technical specification | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 \xb5m/280... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 101: Protective cover receptacle - Product standard | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 103: Protective cover jam nut receptacle - Product standard... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 104: Receptacle connector dummy four holes fixing - Product... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 105: Receptacle connector dummy two holes fixing - Product... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 106: Receptacle connector dummy jam nut - Product standard... | |
| Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 \xb0C continuous - Part 108: Cable support boot - Product standard | |
| Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 005: Crimp receptacle - Product standard | |
| Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard | |
| Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, op-erating temperature 175 \xb0C or 200 \xb0C continuous - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 002: Specification of performance and contact arrangements | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 004: Receptacle, jam-nut mounting - Product standard | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard... | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 008: Plug - Product standard | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 009: Protective cover for receptacle - Product standard | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 010: Protective cover for plug - Product standard | |
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 011: Dummy receptacle - Product standard | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 001:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 002:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 003:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 005:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 006:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 007:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 008:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 009:... | |
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 \xb0C to 175 \xb0C or 200 \xb0C continuous - Part 011:... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 002: Specification of performance and contact arrangements | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 003: Receptacle square flange mounting - Product standard | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 004: Receptacle, hermetic, square flange mounting - Product standard... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 006: Protective cover for receptacle - Product standard | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 007: Protective cover for plug - Product standard | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 008: Non release plug with grounding ring - Product... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 009: Receptacle, round flange, jam nut mounting - Product... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 011: Lanyard release plug with grounding fingers - Type... | |
| Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous - Part 012: Lanyard release plug with grounding fingers - Type... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 \xb0C to 175 \xb0C - Part 002: Specification of performance and... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 \xb0C to 175 \xb0C - Part 005: Male coding and attachment... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 \xb0C to 175 \xb0C - Part 008: Tools for assembly/removal of... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 \xb0C to 175 \xb0C - Part 009: Protective cover for plug... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 \xb0C to 175 \xb0C - Part 001: Technical specification | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 \xb0C to 175 \xb0C - Part 003: Connectors with female contacts -... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 \xb0C to 175 \xb0C - Part 004: Connectors with male contacts -... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 \xb0C to 175 \xb0C - Part 006: Male coding and attachment System... | |
| Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 \xb0C to 175 \xb0C - Part 007: Cable clamp - Product standard... | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 001: Technical specification | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 002: Specification of performance and contact arrangements | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 003: Inserts - Product standard | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 004: Size 2 receptacle - Product standard | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 005: Size 2 plug - Product standard | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 006: Size 3 receptacle - Product standard | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 007: Size 3 plug - Product standard | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 008: Size 4 receptacle - Product standard | |
| Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 \xb0C continuous - Part 009: Size 4 plug - Product standard | |
| Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards | |
| Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard | |
| Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard | |
| Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys | |
| Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) - Classification: 1 210 MPa/730 \xb0C - Manufacturing method optional - Technical specification | |
| Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 275 MPa/650 \xb0C - Manufacturing method optional - Technical specification | |
| Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual examination | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205: Cable longitudinal dimensional stability | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302: Numerical aperture | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-through | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 701: Strippability | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking | |
| Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement | |
| Aerospace series - Fluid fittings, flanged, 90\xb0 elbowed - Sealing by O-ring for 0,8 mm thick tubes | |
| Aerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes | |
| Aerospace series - Groove dimensions for axial mounting internal type retaining rings | |
| Aerospace series - Groove dimensions for axial mouting external type retaining rings | |
| Aerospace series - Grooves for spiral wound retaining rings - Design standard | |
| Aerospace series - Headless threaded plugs - Installation holes | |
| Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086 | |
| Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm <= a <= 10 mm... | |
| Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D <= 250 mm | |
| Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D <= 250 mm | |
| Aerospace series - Holes for 100\xb0 countersunk head screws - Design standard | |
| Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm < a < 100 mm - Dimensions | |
| Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B- Part 001: Technical specification | |
| Aerospace series - In-line couplers for use in multiplex data bus sytems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers - Product standard | |
| Aerospace series - In-line couplers for use in multiplex data systems in accordance with MIL-STD-1553B- Part 003: Single in-line couplers - Product standard | |
| Aerospace series - Inserts, thin wall, self-locking - Design standard | |
| Aerospace series - Installation hole for fluid fittings, flanged | |
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification | |
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification | |
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard | |
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard | |
| Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard | |
| Aerospace series - Nuts, anchor, self-locking, fixed, 60\xb0 corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 \xb0C | |
| Aerospace series - Nuts, anchor, self-locking, fixed, 90\xb0 corner, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 \xb0C... | |
| Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 \xb0C | |
| Aerospace series - Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 \xb0C | |
| Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 \xb0C | |
| Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 \xb0C | |
| Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 \xb0C... | |
| Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 \xb0C | |
| Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 \xb0C... | |
| Aerospace series - Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 \xb0C | |
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /425 \xb0C | |
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /425 \xb0C | |
| Aerospace series - Nuts, clip, metric - Installation holes and assembly | |
| Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/235 \xb0C | |
| Aerospace series - Nuts, hexagon, self-locking, in heat resisting, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 \xb0C | |
| Aerospace series - Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 \xb0C | |
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MP a (at ambient temperature)/425 \xb0C | |
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel, FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425\xb0 C | |
| Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 \xb0C | |
| Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 \xb0C | |
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 \xb0C - Technical specification | |
| Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD | |
| Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification | |
| Aerospace series - Pins, quick release, single and double acting - Technical specification | |
| Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 \xb0C to + 135 \xb0C | |
| Aerospace series - Pipe coupling 8\xb0 30' in titanium alloy - Unions, bulkhead, long welded | |
| Aerospace series - Pipe coupling 8\xb030' - Protective caps with internal threads | |
| Aerospace series - Pipe coupling 8\xb030' - Protective caps | |
| Aerospace series - Pipe coupling 8\xb030' - Protective plugs with external threads | |
| Aerospace series - Pipe coupling 8\xb030' in titanium alloy - Adaptors with lockring | |
| Aerospace series - Pipe coupling 8\xb030' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end | |
| Aerospace series - Pipe couplings 8\xb030' in titanium alloy - Unions, bulkhead, long | |
| Aerospace series - Rings retaining, external, axial mounting, steel, phosphated | |
| Aerospace series - Rings retaining, external, axial mounting, steel, vacuum cadmium plated | |
| Aerospace series - Rings retaining, internal, axial mounting, steel, phosphated | |
| Aerospace series - Rings retaining, internal, axial mounting, steel, vacuum cadmium plated | |
| Aerospace series - Rings retaining, radial mounting, steel, phosphated | |
| Aerospace series - Rings, retaining - Technical specification | |
| Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated | |
| Aerospace series - Rivets, solid, 100\xb0 countersunk normal head with dome, in titanium TI-PO2, anodized, inch based series | |
| Aerospace series - Rivets, solid, 100\xb0 countersunk normal head, in titanium TI-PO2, anodized, inch based series | |
| Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series | |
| Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series | |
| Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearance and loads | |
| Aerospace series - Screws, 100\xb0 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at... | |
| Aerospace series - Screws, 100\xb0 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315\xb0... | |
| Aerospace series - Screws, 100\xb0 countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425\xb0 C... | |
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425\xb0 C | |
| Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1100 MPa (at ambient temperature) | |
| Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa/650 \xb0C | |
| Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated | |
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /425 \xb0C | |
| Aerospace series - Sockets, bi-hexagonal - Technical Specification | |
| Aerospace series - Spigots - Dimensions and fit selection - Design standard | |
| Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D <= 250 mm - 500 MPa <= Rm <= 700 MPa... | |
| Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a <= 50 mm - 500 MPa <= Rm <= 700 MPa | |
| Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De <= 100 mm - 930 MPa <= Rm <= 1 080 MPa | |
| Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D <= 300 mm | |
| Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De <= 100 mm - 1080 MPa <= Rm <= 1280 MPa... | |
| Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm - Rm + 1 310... | |
| Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D <= 150 mm -... | |
| Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm - Rm >= 1310 MPa | |
| Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm - Rm >= 930 MPa | |
| Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De <= 100 mm - 900 MPa <= Rm <= 1 100 MPa | |
| Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Bar - a or D <= 150 mm -... | |
| Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure | |
| Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch... | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series... | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to... | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to... | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150... | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to... | |
| Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200... | |
| Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes | |
| Aerospace series - Test methods - Titanium alloy wrought products - Determination of b (beta) transus temperature - Metallographic method | |
| Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method | |
| Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys | |
| Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a <= 100 mm | |
| Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a <= 50 mm | |
| Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a <= 6 mm | |
| Aerospace series - Tube bend radii, for engine application - Design standard | |
| Aerospace series - Tubes - Selection for engines fluid systems | |
| Aerospace series - Undercuts for splines - Design standard | |
| Aerospace series - Washers in heat resisting steel | |
| Aerospace series - Weld lip - Geometrical configuration | |
| Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset | |
| Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification | |
| Aerospace series \x96 Aluminium alloy AL-P6061-T4 \x96 Drawn tube for pressure applications \x96 0,6 mm = a = 3 mm | |
| Aerospace series \x96 Aluminium or aluminium alloy conductors for electrical cables \x96 Product standard | |
| Aerospace series \x96 Anaerobic polymerisable compounds \x96 Technical specification | |
| Aerospace series \x96 Bolts in heat resisting steel FE-PA2601 (A286) \x96 Classification: 1 100 MPa/650 \xb0C \x96 Technical specification | |
| Aerospace series \x96 Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated \x96 Classification: 1 100 MPa (at ambient temperature)/315\xb0 C | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 001: Technical specification | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 003: Grommet nut, style A for EN 2997 and EN 4067 \x96 Product standard... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief \x96 Product standard... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 005: Cable outlet, style A, 90\xb0, unsealed with clamp strain relief \x96 Product standard... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed \x96 Product... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed \x96 Product... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 034: Memory metal rings, style Z, for the attachment of screens \x96 Product standard... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 035: Cable outlet, style K, 90\xb0, for heat shrinkable boot, shielded, sealed \x96 Product... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 038: Manual installation tool, style Z, for installation of stainless steel shield termination band... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 062: Cable outlet, style K, 90\xb0, for heat shrinkable boot, shielded, sealed, self-locking for... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 065 : Cable outlet, style K, 90\xb0, for heat shrinkable boot, shielded, sealed, self... | |
| Aerospace series \x96 Cable outlet accessories for circular and rectangular electrical and optical connectors \x96 Part 066: Cable outlet, style K, 90\xb0, for heat shrinkable boot, shielded, sealed \x96 Product... | |
| Aerospace series \x96 Cable, electrical, for digital data transmission \x96 Part 001: Technical specification | |
| Aerospace series \x96 Cable, electrical, for digital data transmission \x96 Part 007: Double braid \x96 77 Ohms \x96 Type WW \x96 Product standard | |
| Aerospace series \x96 Cable, electrical, for digital data transmission \x96 Part 009: Single braid \x96 CAN Bus \x96 120 ohms \x96 Type WX \x96 Product standard | |
| Aerospace series \x96 Cable, electrical, for digital data transmission \x96 Part 011: Single braid \x96 Star Quad 100 ohms \x96 Light weight \x96 Type KL \x96 Product standard | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 418: Thermal endurance for conductors | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 505: Tensile test on conductors and strands | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 512: Flexure endurance | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 603: Resistance to wet arc tracking | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 604: Resistance to dry arc propagation | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 605: Wet short circuit test | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 606: Wicking test on textile braid insulation | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 701: Strippability and adherence of insulation to the conductor | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 705: Contrast measurement | |
| Aerospace series \x96 Cables, electrical, aircraft use \x96 Test methods \x96 Part 707: Stabilization of assembly | |
| Aerospace series \x96 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A \x96 Part 001: Technical specification | |
| Aerospace series \x96 Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A \x96 Part 001: Technical specification | |
| Aerospace series \x96 Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A \x96 Part 004: UNC thread terminals \x96 Product standard | |
| Aerospace series \x96 Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A \x96 Part 006: 6,3 blade terminal \x96 Product standard | |
| Aerospace series \x96 Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous \x96 Part 003: Receptacle, square flange mounting \x96 Product standard | |
| Aerospace series \x96 Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous \x96 Part 005: Receptacle, hermetic, square flange mounting \x96 Product standard | |
| Aerospace series \x96 Connectors, electrical, circular, bayonet coupling, operating temperature 175 \xb0C or 200 \xb0C continuous \x96 Part 006: Receptacle, hermetic, jam-nut mounting \x96 Product standard | |
| Aerospace series \x96 Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous \x96 Part 005: Receptacle, hermetic, round flange, brasage mounting \x96 Product... | |
| Aerospace series \x96 Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous \x96 Part 010: Receptacle, hermetic, round flange, jam nut mounting \x96... | |
| Aerospace series \x96 Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 \xb0C or 200 \xb0C continuous \x96 Part 013: Dummy receptacle \x96 Product standard | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 202: Fibre dimensions | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 404: Thermal shock | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 411: Resistance to fluids | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 412: Humidity resistance | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 505: Cable tensile strength | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 506: Impact resistance | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 510: Bending test | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 516: Severe cable bend test | |
| Aerospace series \x96 Fibres and cables, optical, aircraft use \x96 Test methods \x96 Part 517: Cable tie clamping test | |
| Aerospace series \x96 Groove dimensions for radial mounting retaining rings | |
| Aerospace series \x96 Heat resisting alloy FE-PA2601 \x96 Softened and cold worked \x96 Bar for forged fasteners \x96 D = 50 mm \x96 1 100 MPa = Rm = 1... | |
| Aerospace series \x96 Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) \x96 Solution treated and precipitation treated \x96 Bars and sections \x96 De = 100 mm | |
| Aerospace series \x96 Heat resisting alloy NI-PH2601 \x96 Solution treated and cold worked \x96 Bar for forged fasteners \x96 D = 50 mm \x96 1 550 MPa = Rm =... | |
| Aerospace series \x96 Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) \x96 Softened and cold worked \x96 Wires for forged fasteners \x96 D = 15 mm \x96 900 MPa = Rm = 1... | |
| Aerospace series \x96 Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) | |
| Aerospace series \x96 Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated \x96 Classification: 900 MPa (at ambient temperature)/235 \xb0C | |
| Aerospace series \x96 Nuts, self-locking, bi-hexagonal (double reduced), in heat resisting nickel base alloy \x96 NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 \xb0C | |
| Aerospace series \x96 O-ring grooves \x96 Dimensions | |
| Aerospace series \x96 Polycarbonate, self-extinguishing, low smoke emission \x96 Characteristics | |
| Aerospace series \x96 PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8\xb030' fitting in titanium \x96 Product standard | |
| Aerospace series \x96 Sampling plan for acceptance testing of aramid, carbon fibre and textile glass filament yarns | |
| Aerospace series \x96 Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30\xb0C swage \x96 Classification: 1 210 MPa (at ambient temperature) / 730\xb0C | |
| Aerospace series \x96 Steel 15CrMoV6 (1.7334) \x96 Air melted \x96 Hardened and tempered \x96 Plates \x96 6 mm = a = 20 mm \x96 1 080 MPa = Rm =... | |
| Aerospace series \x96 Steel 15CrMoV6 (1.7334) \x96 Air melted \x96 Hardened and tempered \x96 Sheets and strips \x96 0,5 mm = a = 6 mm \x96 980 MPa = Rm... | |
| Aerospace series \x96 Steel 15CrMoV6 (1.7334) \x96 Air melted \x96 Hardened and tempered \x96 Sheets and strips \x96 2 mm = a = 6 mm \x96 1 080 MPa =... | |
| Aerospace series \x96 Steel FE-PL1504 (33CrMoV12) \x96 Air melted \x96 Softened \x96 Forging stock \x96 a or D <= 300 mm | |
| Aerospace series \x96 Steel FE-PM1503 (X3CrNiMoAl13-8-2) \x96 Vacuum induction melted and consumable electrode remelted \x96 Solution treated and precipitation treated \x96 Forgings \x96 a or D = 150 mm \x96... | |
| Aerospace series \x96 Steel FE-PM2701 (X2NiCoMo18-8-5) \x96 Vacuum induction melted and vacuum arc remelted \x96 Solution treated and precipitation treated \x96 Plate \x96 6 mm < a <= 40 mm... | |
| Aerospace series \x96 Steel FE-PM2701 (X2NiCoMo18-8-5) \x96 Vacuum induction melted and vacuum arc remelted \x96 Solution treated and precipitation treated \x96 Sheet and strip \x96 a <= 6 mm \x96... | |
| Aerospace series \x96 Steel FE-PM3901 (X15CrNi17-3) \x96 Air melted \x96 Hardened and tempered \x96 Bar for machining \x96 De <= 200 mm \x96 900 MPa <= Rm <= 1100 MPa... | |
| Aerospace series \x96 Steel X3CrNiMoAl13-8-2 (1.4534) \x96 Solution annealed and precipitation hardened \x96 1 400 = Rm = 1 550 MPa \x96 Forgings \x96 De = 100 mm | |
| Aerospace series \x96 Steel X5CrNiCu15-5 (1.4545) \x96 Consumable electrode remelted \x96 Solution treated and precipitation treated \x96 Plates \x96 6 mm < a = 20 mm \x96 1 070 MPa... | |
| Aerospace series \x96 Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) \x96 As cast \x96 Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero \x96 Remelting stock | |
| Aerospace series \x96 Steel X6CrNiTi18-10 (1.4541) \x96 Air melted \x96 Softened \x96 Sheets and strips \x96 a = 6 mm \x96 500 MPa = Rm = 700 MPa | |
| Aerospace series \x96 Steel X8CrNiTi18-10 (1.4878/1.4544) \x96 Annealed \x96 Reference heat treatment: softened \x96 Forging stock \x96 De = 100 mm | |
| Aerospace series \x96 Steel X8CrNiTi18-10 (1.4878/1.4544) \x96 Annealed \x96 Reference heat treatment: softened \x96 Hollow bars \x96 5 mm = a = 12 mm | |
| Aerospace series \x96 Steel X8CrNiTi18-10 (1.4878/1.4544) \x96 Softened \x96 500 = Rm = 750 MPa \x96 Tubes for structures \x96 0,5 = a = 5 mm | |
| Aerospace series \x96 Steel X8CrNiTi18-10 (1.4878/1.4544) \x96 Softened \x96 500 MPa = Rm = 700 MPa \x96 Forgings \x96 De = 100 mm | |
| Aerospace series \x96 Terminal lugs and in-line splices for crimping on electric conductors \x96 Part 001: Technical specification | |
| Aerospace series \x96 Titanium TI-P99002 \x96 Annealed \x96 Bar for machining \x96 a or D = 150 mm \x96 Rm = 390 MPa | |
| Aerospace series \x96 Titanium TI-P99002 \x96 Annealed \x96 Wires for rivets \x96 1,6 mm = D = 10 mm | |
| Aerospace series \x96 Titanium TI-P99002 \x96 Not heat treated \x96 Grade 2 forging stock, for annealed forgings \x96 a or D = 300 mm | |
| Durability of wood and wood-based products \x96 Natural durability of solid wood \x96 Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe | |
| Durability of wood and wood-based products \x96 Preservative-treated solid wood \x96 Part 1: Classification of preservative penetration and retention | |
| Durability of wood and wood-based products \x96 Preservative-treated solid wood \x96 Part 2: Guidance on sampling for the analysis of preservative-treated wood | |
| Durability of wood and wood-based products \x96 Testing and classification of the durability to biological agents of wood and wood-based materials | |
| Glass in building - Security glazing - Testing and classification of resistance against manual attack | |
| Hearing protectors \x96 General requirements \x96 Part 1: Ear-Muffs | |
| Hearing protectors \x96 General requirements \x96 Part 2: Ear-plugs | |
| Hearing protectors \x96 General requirements \x96 Part 2: Earplugs | |
| Hearing protectors \x96 General requirements \x96 Part 3: Ear-muffs attached to an industrial safety helmet | |
| Hearing protectors \x96 Safety requirements \x96 Part 10: Entertainment audio earplugs | |
| Hearing protectors \x96 Safety requirements \x96 Part 6: Earmuffs with safety-related audio input | |
| Hearing protectors \x96 Safety requirements \x96 Part 8: Entertainment audio earmuffs | |
| Hearing protectors \x96 Safety requirements \x96 Part 9: Earplugs with safety-related audio input | |
| Hearing protectors \x96 Safety requirements and testing \x96 Part 4: Level-dependent ear-muffs | |
| Hearing protectors \x96 Safety requirements and testing \x96 Part 5: Active noise reduction ear-muffs | |
| Hearing protectors \x96 Safety requirements and testing \x96 Part 6: Ear-muffs with electrical audio input | |
| Hearing protectors \x96 Safety requirements and testing \x96 Part 7: Level-dependent ear-plugs | |
| Hearing protectors \x96 Safety requirements and testing \x96 Part 8: Entertainment audio ear-muffs | |
| Information supplied by the manufacturer with in vitro diagnostic reagents for professional use | |
| Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes | |
| Pedestal bidets with over-rim supply - Connecting dimensions | |
| Personal eye-protection \x96 Automatic welding filters | |
| Personal fall protection equipment - Descender devices for rescue | |
| Personal fall protection equipment \x96 Guided type fall arresters including an anchor line \x96 Part 1: Guided type fall arresters including a rigid anchor line | |
| Personal fall protection equipment \x96 Lanyards | |
| Personal fall protection equipment \x96 Part 2: Guided type fall arresters including a flexible anchor line | |
| Personal fall protection equipment \x96 Personal fall protection systems | |
| Personal fall protection equipment \x96 Retractable type fall arresters | |
| Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line | |
| Personal protective equipment against falls from a height - Test methods | |
| Personal protective equipment against falls from a height \x96 Connectors | |
| Personal protective equipment against falls from a height \x96 Energy absorbers | |
| Personal protective equipment against falls from a height \x96 Full body harnesses | |
| Personal protective equipment against falls from a height \x96 General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging | |
| Personal protective equipment for work positioning and prevention of falls from a height \x96 Belts for work positioning and restraint and work positioning lanyards | |
| Protective clothing - General requirements | |
| Protective clothing - Protection against rain | |
| Protective clothing - Test method: Determination of behaviour of materials on impact of small splashes of molten metal | |
| Protective clothing \x96 Ensembles and garments for protection against cold | |
| Protective clothing \x96 Protection against heat and fire \x96 Method of determining heat transmission on exposure to flame | |
| Protective clothing \x96 Protection against rain | |
| Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals | |
| Protective gloves against chemicals and micro-organisms \x96 Part 1: Terminology and performance requirements | |
| Protective gloves against chemicals and micro-organisms \x96 Part 4: Determination of resistance to degradation by chemicals | |
| Protective gloves against dangerous chemicals and micro-organisms \x96 Part 2: Determination of resistance to penetration | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 1: Basic requirements, definitions, classification and selection criteria | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 2: Design, construction, testing, marking and documentation | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 3: Installation site and personal protection | |
| Refrigerating systems and heat pumps \x96 Safety and environmental requirements \x96 Part 4: Operation, maintenance, repair and recovery | |
| Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | |
| Safety of machinery \x96 Minimum gaps to avoid crushing of parts of the human body | |
| Structural timber - Strength classes | |
| Wall-hung bidets over-rim supply - Connecting dimensions | |
| WC pans and WC suites \x96 Connecting dimensions | |
| Wood preservatives \x96 Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer) |
| << Prev | Next >> |