Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
690
700
710
720
730
740
744
745
746
747
748
749
750
751
752
753
754
755
756
760
770
780
790
800
810
850
900
950
1000
1050
1100
1500
1620
| Product Name | Notes |
|---|---|
| A typology of language registers | |
| Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results | |
| Acoustics - Definitions of basic quantities and terms | |
| Acoustics - Software for the calculation of sound outdoors - Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1 | |
| Acoustics - Stationary audible warning devices used outdoors - Part 2: Precision methods for determination of sound emission quantities | |
| Acoustics \x96 Assessment of noise annoyance by means of social and socio-acoustic surveys | |
| Acoustics \x96 Measurement of the influence of road surfaces on traffic noise \x96 Part 3: Reference tyres | |
| Acoustics \x96 Non-acoustic factors influencing the perception, interpretation and response to environmental sounds \x96 Part 1: Definition and conceptual framework | |
| Acoustics \x96 Software for the calculation of sound outdoors \x96 Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1... | |
| Acoustics \x96 Soundscape \x96 Part 2: Data collection and reporting requirements | |
| Acoustics \x96 Soundscape \x96 Part 3: Data analysis | |
| Acoustics \x96 Temperature influence on tyre/road noise measurement \x96 Part 1: Correction for temperature when testing with the CPX method | |
| Acoustics \x96 Temperature influence on tyre/road noise measurement \x96 Part 2: Correction for temperature when testing with the pass-by methods | |
| Adaptation to climate change \x96 Requirements and guidance on adaptation planning for local governments and communities | |
| Adventure tourism \x96 Leaders \x96 Personnel competence | |
| Application examples for using reaction-to-fire test data for fire safety engineering | |
| Application Guideline on Data Carriers for Supply Chain Management | |
| Application of risk management for IT-networks incorporating medical devices \x96 Application guidance \x96 Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1... | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-6: Application guidance \x96 Guidance for responsibility agreements | |
| Application of ubiquitous public access to-geographic information to an air quality information service | |
| Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device | |
| Assistive products for tissue integrity when lying down \x96 Part 7: Foam properties, characteristics and performance | |
| Automation systems and integration \x96 Digital twin framework for manufacturing \x96 Part 100: Use case on management of semiconductor ingot growth process | |
| Automation systems and integration \x96 Key performance indicators (KPIs) for manufacturing operations management \x96 Part 10: Operational sequence description of data acquisition | |
| Automation systems and integration \x96 The Big Picture of standards | |
| Automation systems and integration \x96 Use case of capability profiles for cooperation between manufacturing software units | |
| Background information and guidance on environmental cyanide analysis | |
| Banking - Personal Identification Number (PIN) management and security - Part 4: Guidelines for PIN handling in open networks | |
| Basic considerations for the safety of hydrogen systems | |
| Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations | |
| Basic human body measurements for technological design \x96 Part 4: Expected performance of skilled anthropometrists | |
| Biological evaluation of medical devices - Part 20: Principles and methods for immunotoxicology testing of medical devices | |
| Biological evaluation of medical devices \x96 Guidance on the conduct of biological evaluation within a risk management process | |
| Biological evaluation of medical devices \x96 Part 19: Physico-chemical, morphological and topographical characterization of materials | |
| Biological evaluation of medical devices \x96 Requirements for interlaboratory studies to demonstrate the applicability of validated in vitro methods to assess the skin sensitization of medical devices | |
| Biotechnology \x96 Biobanking \x96 Implementation guide for ISO 20387 | |
| Biotechnology \x96 Data publication \x96 Preliminary considerations and concepts | |
| Biotechnology \x96 Inventory of methods for detection of microbiological contamination in mammalian cell culture | |
| Blockchain and distributed ledger technologies (DLTs) \x96 Overview of trust anchors for DLT-based identity management | |
| Blockchain and distributed ledger technologies \x96 Data flow models for blockchain and DLT use cases | |
| Blockchain and distributed ledger technologies \x96 Identifiers of subjects and objects for the design of blockchain systems | |
| Blockchain and distributed ledger technologies \x96 Overview of and interactions between smart contracts in blockchain and distributed ledger technology systems | |
| Blockchain and distributed ledger technologies \x96 Overview of existing DLT systems for identity management | |
| Blockchain and distributed ledger technologies \x96 Privacy and personally identifiable information protection considerations | |
| Blockchain and distributed ledger technologies \x96 Security management of digital asset custodians | |
| Blockchain and distributed ledger technologies \x96 Use cases | |
| Brazing \x96 Grouping systems for materials \x96 American materials | |
| Building environment design \x96 List of test procedures for heating, ventilating, air-conditioning and domestic hot water equipment related to energy efficiency | |
| Buildings and constructed assets \x96 Service life planning \x96 Terminology | |
| Buildings and constructed assets \x96 Service-life planning \x96 Part 9: Guidance on assessment of service-life data | |
| Calculation of load capacity of bevel gears \x96 Part 20: Calculation of scuffing load capacity \x96 Flash temperature method | |
| Calculation of load capacity of spur and helical gears -- Part 31: Calculation examples of micropitting load capacity | |
| Calculation of load capacity of spur and helical gears \x96 Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 | |
| Calculation of micro-pitting load capacity of cylindrical spur and helical gears - Part 2: Examples of calculation for micropitting | |
| Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles | |
| Carbon dioxide capture \x96 Carbon dioxide capture systems, technologies and processes | |
| Carbon dioxide capture \x96 Overview of carbon dioxide capture technologies in the cement industry | |
| Carbon dioxide capture, transportation and geological storage \x96 Cross Cutting Issues \x96 CO2 stream composition | |
| Carbon dioxide capture, transportation and geological storage \x96 Injection operations, infrastructure and monitoring | |
| Carbon dioxide capture, transportation and geological storage \x96 Quantification and verification | |
| Cardiovascular biological evaluation of medical devices - Guidance for absorbable implants | |
| Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products | |
| Cereals and cereal products \x96 Sampling studies | |
| Circular economy \x96 Review of existing value networks | |
| Cleanrooms and associated controlled environments \x96 Part 21: Airborne particle sampling techniques | |
| Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer | |
| Comparison of worldwide escalator and moving walk safety standards \x96 Part 1: Clause by clause comparison | |
| Comparison of worldwide escalator and moving walk safety standards \x96 Part 2: Abbreviated comparison and comments | |
| Consumer protection \x96 Privacy by design for consumer goods and services \x96 Part 2: Use cases | |
| Cooperative intelligent transport systems (C-ITS) \x96 Guidelines on the usage of standards \x96 Part 1: Standardization landscape and releases | |
| Cooperative intelligent transport systems (C-ITS) \x96 Guidelines on the usage of standards \x96 Part 2: Hybrid communications | |
| Cooperative intelligent transport systems (C-ITS) \x96 Guidelines on the usage of standards \x96 Part 3: Security | |
| Core banking \x96 Mobile financial services \x96 Part 2: Security and data protection for mobile financial services | |
| Core banking \x96 Mobile financial services \x96 Part 3: Financial application lifecycle management | |
| Core banking \x96 Mobile financial services \x96 Part 4: Mobile payments-to-persons | |
| Core banking \x96 Mobile financial services \x96 Part 5: Mobile payments to businesses | |
| Corrosion of metals and alloys \x96 Overview of metal corrosion protection when using disinfectants | |
| Cosmetics - Good Manufacturing Practices - General training document | |
| Crop protection equipment - Traceability - Spray parameter recording | |
| Deformations and displacements of buildings and building elements at serviceability limit states | |
| Design recommendations for bevel gears | |
| Design using geosynthetics \x96 Part 1: General | |
| Design using geosynthetics \x96 Part 2: Separation | |
| Design using geosynthetics \x96 Part 3: Filtration | |
| Design using geosynthetics \x96 Part 4: Drainage | |
| Design using geosynthetics \x96 Part 7: Reinforcement | |
| Design using geosynthetics \x96 Part 9: Barriers | |
| Determination of the resistance to jet fires of passive fire protection - Part 2: Guidance on classification and implementation methods | |
| Determination of uncertainty for volume measurements made using the gravemetric method | |
| Direct Marking on Plastic Returnable Transport Items (RTIs) | |
| Document management \x96 Analysis, selection and implementation of electronic document management systems (EDMS) | |
| Document management \x96 Digital file format recommendations for long-term storage | |
| Document management \x96 Information stored electronically \x96 Recommendations for trustworthiness and reliability | |
| Earth-moving machinery and mobile road construction machinery \x96 Worksite data exchange \x96 Part 4: Worksite topographical data | |
| Electrically propelled road vehicles \x96 Vocabulary | |
| Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings | |
| Electronic business eXtensible Markup Language (ebXML) - Part 1: Collaboration-protoc ol profile and agreement specification (ebCPP) | |
| Electronic business eXtensible Markup Language (ebXML) - Part 2: Message service specification (ebMS) | |
| Electronic business eXtensible Markup Language (ebXML) - Part 4: Registry services specification (ebRS) | |
| Electronic fee collection \x96 Pre-study on the use of vehicle licence plate information and automatic number plate recognition (ANPR) technologies | |
| Energy performance of buildings -- Overall energy performance assessment procedures -- Part 2: Guideline for using indoor environmental input parameters for the design and assessment of energy performance of buildings... | |
| Energy performance of buildings \x96 Building automation, controls and building management \x96 Part 2: Explanation and justification of ISO 52127-1 | |
| Energy performance of buildings \x96 Contribution of building automation, controls and building management \x96 Part 2: Explanation and justification of ISO 52120-1 | |
| Energy performance of buildings \x96 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads \x96 Part 4: Explanation and justification of ISO 52016-3 | |
| Environmental labels and declarations \x96 Development of product category rules | |
| Environmental management - Life cycle assessment - Data documentation format | |
| Environmental management - Life cycle assessment - Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis | |
| Environmental management - Life cycle assessment - Illustrative examples on how to apply ISO 14044 to impact assessment situations | |
| Environmental management \x96 Environmental techno-economic assessment \x96 Principles, requirements and guidance | |
| Environmental management \x96 Guidelines for establishing good practices for combatting land degradation and desertification \x96 Part 2: Regional case studies | |
| Environmental management \x96 Integrating environmental aspects into product design and development | |
| Environmental management \x96 Life cycle assessment \x96 Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 | |
| Environmental management \x96 Life cycle assessment \x96 Principles, requirements and guidelines for normalization, weighting and interpretation | |
| Environmental management \x96 Life cycle assessment \x96 Requirements and guidelines for organizational life cycle assessment | |
| Environmental management \x96 Quantitative environmental information \x96 Guidelines and examples | |
| Environmental management \x96 Water footprint \x96 Illustrative examples on how to apply ISO 14046 | |
| Environmental statements and programmes for products \x96 Mutual recognition of environmental product declarations (EPDs) and footprint communication programmes | |
| Ergonomics \x96 Application of ISO 11226, the ISO 11228 series and ISO/TR 12295 in the agricultural sector | |
| Ergonomics \x96 Recovery model for cyclical industrial work | |
| Ergonomics \x96 The application of ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector (civil construction) | |
| Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities | |
| Ergonomics methods \x96 Part 1: Feedback method \x96 A method to understand how end users perform their work with machines | |
| Ergonomics of human-system interaction - Usability methods supporting human-centered design | |
| Ergonomics of human-system interaction \x96 Part 100: Overview of ISO 9241 software ergonomic standards | |
| Ergonomics of human-system interaction \x96 Part 311: Application of ISO 9241-307: LCD screens for workstations | |
| Ergonomics of human-system interaction \x96 Part 312: Readability of electrophoretic displays | |
| Ergonomics of human-system interaction \x96 Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction | |
| Ergonomics of human-system interaction \x96 Part 393: Structured literature review of visually induced motion sickness during watching electronic images | |
| Ergonomics of human-system interaction \x96 Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series | |
| Ergonomics of human-system interaction \x96 Part 610: Impact of light and lighting on users of interactive systems | |
| Ergonomics of human-system interaction \x96 Part 810: Robotic, intelligent and autonomous systems | |
| Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature | |
| Evaluating the performance of continuous air monitors \x96 Part 1: Air monitors based on accumulation sampling techniques | |
| Evaluating the performance of continuous air monitors \x96 Part 2: Air monitors based on flow-through sampling techniques without accumulation | |
| Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass | |
| Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-contain ing polymer composites | |
| Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes | |
| Examples of good practice for the management of assets of water supply and wastewater systems \x96 Part 2: Wastewater systems | |
| Experiment results on test methods for detection and avoidance (DAA) systems for unmanned aircraft systems | |
| Explanatory notes on ISO 281/1-1977 | |
| Facility management \x96 Existing performance management in facility management organizations \x96 State of the industry | |
| Facility management \x96 Overview of available technologies | |
| Facility management \x96 Scope, key concepts and benefits | |
| Facility management\x92s role in sustainability, resilience and adaptability | |
| Fans \x96 System effects and system effect factors | |
| Fasteners \x96 Fundamentals of hydrogen embrittlement in steel fasteners | |
| Financial services \x96 Information security guidelines | |
| Financial services \x96 Semantic technology \x96 Part 2: OWL representation of the ISO 20022 metamodel and e-repository | |
| Financial services \x96 Semantic technology \x96 Part 3: Semantic enrichment of the ISO 20022 conceptual model | |
| Financial services \x96 Semantic technology \x96 Part 5: Mapping from FIX Orchestra to the common model | |
| Financial services \x96 Third-party payment service providers | |
| Fire resistance \x96 Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design | |
| Fire resistance tests - Guidelines for computational structural fire design | |
| Fire safety - Overview of national fire statistics practices | |
| Fire safety engineering - Assessment, verification and validation of calculation methods - Example of a CFD model | |
| Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2: Example of a fire zone model | |
| Fire safety engineering - Assessment, verification and validation of calculation methods - Part 4: Example of a structural model | |
| Fire safety engineering - Assessment, verification and validation of calculation methods - Part 5: Example of an Egress model | |
| Fire Safety Engineering - Fire risk assessment - Part 2: Example of an office building | |
| Fire safety engineering - Guidance for use of fire zone models | |
| Fire safety engineering - Part 1: The application of fire performance concepts to design objectives | |
| Fire safety engineering - Part 2: Design fire scenarios and design fires | |
| Fire safety engineering - Part 3: Assessment and verification of mathematical fire models | |
| Fire safety engineering - Part 4: Initiation and development of fire and generation of fire effluents | |
| Fire safety engineering - Part 5: Movement of fire effluent | |
| Fire safety engineering - Part 6: Structural response and fire spread beyond the enclosure of origin | |
| Fire safety engineering - Part 7: Detection, activation and suppression | |
| Fire safety engineering - Part 8: Life safety - Occupant behaviour, location and condition | |
| Fire safety engineering - Performance of structure in fire - Part 3: Example of an open car park | |
| Fire safety engineering \x96 Examples of fire safety objectives, functional requirements and safety criteria | |
| Fire safety engineering \x96 Fire risk assessment \x96 Part 3: Example of an industrial property | |
| Fire safety engineering \x96 General principles \x96 Part 2: Example of a dry-cleaning store | |
| Fire safety engineering \x96 Performance of structure in fire \x96 Part 2: Example of an airport terminal | |
| Fire safety engineering \x96 Performance of structures in fire \x96 Part 4: Example of a fifteen-storey steel-framed office building | |
| Fire safety engineering \x96 Performance of structures in fire \x96 Part 5: Example of a timber building in Canada | |
| Fire safety engineering \x96 Performance of structures in fire \x96 Part 6: Example of an eight-storey office concrete building | |
| Fire safety engineering \x96 Performance of structures in fire \x96 Part 8: Example of a probabilistic assessment of a concrete building | |
| Fire safety engineering \x96 Selection of design fire scenarios and design fires \x96 Part 2: Design fires | |
| Fire safety engineering \x96 Survey of performance-based fire safety design practices in different countries | |
| Fire safety on lifts \x96 Part 10: Comparison of safety standards worldwide on lifts used by firefighters and for building evacuation | |
| Fire tests \x96 Applicability of reaction to fire tests to fire modelling and fire safety engineering | |
| Fire-safety engineering \x96 Technical information on methods for evaluating behaviour and movement of people | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Lists of critical chemical substances | |
| Framework for building information modelling (BIM) guidance | |
| Freight containers - Radio frequency identification (RFID) - Licence plate tag - Technical Corrigendum 1 | |
| Freight containers - Radio frequency identification (RFID) - Licence plate tag | |
| Gas cylinders -- Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes | |
| Gas cylinders \x96 Guidance for design of composite cylinders \x96 Part 3: Calculation of stress ratios | |
| Gas cylinders \x96 Guidance for design of composite cylinders \x96 Part 4: Cyclic fatigue of fibres and liners | |
| Gas cylinders \x96 Information for design of composite cylinders \x96 Part 5: Impact testing of composite cylinders | |
| Gas cylinders \x96 List of provisions | |
| Gears \x96 Calculation of load capacity of worm gears | |
| Geographic Information - Functional standards | |
| Geographic information - Imagery and gridded data | |
| Geographic Information \x96 Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues | |
| Geographic information \x96 Securing interoperability among heterogeneous city domain information models | |
| Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation | |
| Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters | |
| Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 28: Profile filters: End effects | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 31: Robust profile filters: Gaussian regression filters | |
| Geometrical product specifications (GPS) \x96 Filtration \x96 Part 32: Robust profile filters: Spline filters | |
| Geometrical Product Specifications (GPS) \x96 Inspection by measurement of workpieces and measuring equipment \x96 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile method \x96 Flowchart for PSm, RSm, WSm and Pc, Rc, Wc | |
| GIS (geospatial) / BIM interoperability | |
| Good practice for dynamic light scattering (DLS) measurements | |
| Graphic technology \x96 Guidelines for the use of standards for print media production | |
| Graphic technology \x96 Print quality requirements for printed matter \x96 Part 2: Commercial print applications utilizing digital printing technologies | |
| Graphic technology \x96 Requirements for printed matter for commercial and industrial production \x96 Part 1: Measurement methods and reporting schema | |
| Graphic technology and photography - Colour characterization of digital still cameras (DSCs) - Part 2: Considerations for determining scene analysis transforms | |
| Graphic technology and photography \x96 Colour characterization of digital still cameras (DSCs) \x96 Part 3: User controls and readouts for scene-referred imaging applications | |
| Graphic technology and photography \x96 Colour characterization of digital still cameras (DSCs) \x96 Part 5: Colour targets including saturated colours for colour characteristic evaluation test for colorimetric image capture | |
| Greenhouse gases - Quantification and reporting of greenhouse gas emissions for organizations - Guidance for the application of ISO 14064-1 | |
| Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment \x96 Part 2: Evaluation of individual physical fire models... | |
| Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface | |
| Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery | |
| Guidance on the application of statistical methods to quality and to industrial standardization | |
| Guidance on the development and use of ISO statistical publications supported by software | |
| Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling | |
| Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes | |
| Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables | |
| Guidance on the selection of the appropriate means of ventilation based on the intended patient, use environment, and operator | |
| Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters | |
| Guidance on transition periods for standards developed by ISO/TC 84 - Devices for administration of medicinal products and catheters | |
| Guidelines for good practices in zeta-potential measurement | |
| Hand protection \x96 Guidance for selection and use | |
| Health informatics - Capacity-based eHealth architecture roadmap - Part 1: Overview of national eHealth initiatives | |
| Health informatics - Categorial structures for representation of acupuncture - Part 2: Needling | |
| Health informatics - Categorial structures of clinical findings in traditional medicine - Part 1: Traditional Chinese, Japanese and Korean medicine | |
| Health Informatics - Clinical document registry federation | |
| Health informatics - Guidance on standards for enabling safety in health software | |
| Health informatics - IHE global standards adoption - Part 1: Process | |
| Health informatics - IHE global standards adoption - Part 2: Integration and content profiles | |
| Health informatics - IHE global standards adoption - Part 3: Deployment | |
| Health informatics - Personal health records - Definition, scope and context | |
| Health informatics - Provisions for health applications on mobile/smart devices | |
| Health informatics - Sharing of OID registry information | |
| Health informatics \x96 A case study on establishing standardized measurement data in cardiac examination reports | |
| Health informatics \x96 Applications of machine learning technologies in imaging and other medical applications | |
| Health informatics \x96 Capacity-based eHealth architecture roadmap \x96 Part 2: Architectural components and maturity model | |
| Health informatics \x96 Categorial structures for representation of acupuncture \x96 Part 1: Acupuncture points | |
| Health informatics \x96 Categorial structures for representation of acupuncture \x96 Part 3: Moxibustion | |
| Health informatics \x96 Categorial structures for representation of acupuncture \x96 Part 4: Meridian and collateral channels | |
| Health Informatics \x96 Categorial structures for representation of acupuncture \x96 Part 5: Cupping | |
| Health informatics \x96 Categorial structures for representation of acupuncture \x96 Part 6: Acupuncture effects | |
| Health informatics \x96 Classification of purposes for processing personal health information | |
| Health informatics \x96 Cloud computing considerations for the security and privacy of health information systems | |
| Health informatics \x96 Datasets and data structure for clinical and biological evaluation metrics in radiotherapy | |
| Health informatics \x96 Guidance on health information privacy education in healthcare organizations | |
| Health informatics \x96 Guidance on the identification and authentication of connectable Personal Healthcare Devices (PHDs) | |
| Health informatics \x96 Identification of medicinal products \x96 Core principles for maintenance of identifiers and terms | |
| Health informatics \x96 Information security management for remote maintenance of medical devices and medical information systems \x96 Part 1: Requirements and risk analysis | |
| Health informatics \x96 Introduction to Ayurveda informatics | |
| Health informatics \x96 Person-owned document repository for PHR applications and health information exchange | |
| Health informatics \x96 Personal health data generated on a daily basis | |
| Health informatics \x96 Re-usable component strategy for use case development | |
| Health informatics \x96 Reference model for virtual reality (VR)-based clinical practice simulation | |
| Health informatics \x96 Requirements for international machine-readable coding of medicinal product package identifiers (ISO/TS 16791:2020) | |
| Health informatics \x96 Sex and gender in electronic health records | |
| Health informatics \x96 Standardizing graphical content | |
| Health informatics \x96 Survey of mHealth projects in low and middle income countries (LMIC) | |
| Health informatics \x96 Telehealth services \x96 Quality planning guidelines | |
| Imaging materials \x96 Evaluation of image permanence of photographic colour prints in consumer home applications | |
| Imaging materials \x96 Pictorial colour reflection prints \x96 Comparison of image degradation observed between ISO 18930 accelerated weathering test method and outdoor exposure | |
| Industrial automation systems and integration \x96 Product data representation and exchange \x96 Part 15: Description methods: SysML XMI to XSD transformation | |
| Information and documentation - Managing metadata for records - Part 3: Self-assessment method | |
| Information and documentation - Performance indicators for national libraries | |
| Information and documentation - Records management - Part 2: Guidelines | |
| Information and documentation - Statistics and quality issues for web archiving | |
| Information and documentation - Work process analysis for records | |
| Information and documentation \x96 Appraisal for managing records | |
| Information and documentation \x96 Description and presentation of rights information | |
| Information and documentation \x96 Processes and functional requirements for software for managing records \x96 Part 2: Guidance for selecting, designing, implementing and maintaining software for managing records | |
| Information and documentation \x96 Records management in enterprise architecture | |
| Innovation Management Assessment \x96 Guidance | |
| Intelligent transport systems - Using UML for defining and documenting ITS/TICS interfaces | |
| Intelligent transport systems \x96 Framework architecture for plug and play (PnP) functionality in vehicles utilizing nomadic devices | |
| Intelligent transport systems \x96 Graphic data dictionary \x96 Part 2: Examples | |
| Intelligent transport systems \x96 Information interface framework between automated driving systems and users | |
| Intelligent transport systems \x96 Mobility integration \x96 Mobility integration needs for vulnerable users and light modes of transport | |
| Intelligent transport systems \x96 Mobility integration \x96 Role and functional model for mobility services using low Earth orbit (LEO) satellite systems | |
| Intelligent transport systems \x96 Mobility integration \x96 Role model of the human-centric predictive risk information provisioning service | |
| Intelligent transport systems \x96 Public-area mobile robots (PMR) \x96 Part 1: Overview of paradigm | |
| Intelligent transport systems \x96 Spatio-temporal data dictionary for cooperative ITS and automated driving systems 2.0 | |
| ISO and Health Canada intense smoking parameters -Part 2: Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes | |
| Knowledge management of health information standards | |
| Language coding \x96 A framework for language varieties \x96 Part 2: Description of the framework | |
| Large outdoor fires and the built environment \x96 Global overview of different approaches to standardization | |
| Life-threatening components of fire \x96 Part 2: Methodology and examples of tenability assessment | |
| Manufacturers\x92 considerations for in vitro diagnostic medical devices in a public health emergency | |
| Measurement of fluid flow by means of pressure-differentia l devices \x96 Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 series | |
| Measurement of radioactivity in the environment \x96 Air: radon-222 \x96 Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method | |
| Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 32: Measurement of dynamic properties of the ground | |
| Mechanical vibration - Methodology for selecting appropriate machinery vibration standards | |
| Mechanical vibration \x96 Ground-borne noise and vibration arising from rail systems \x96 Part 31: Guideline on field measurements for the evaluation of human exposure in buildings | |
| Medical devices - Guidance on the application of ISO 14971 | |
| Medical devices \x96 Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices | |
| Medical devices \x96 Post-market surveillance for manufacturers | |
| Medical electrical equipment \x96 Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph | |
| Medical laboratories \x96 Guidance on laboratory implementation of ISO 15189:2003 | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for detection and enumeration of Campylobacter spp. \x96 Part 2: Colony-count technique | |
| Microstructure of cast irons - Part 2: Graphite classification by image analysis | |
| Molecular biomarker analysis - SSR analysis of maize | |
| Molecular biomarker analysis - SSR analysis of sunflower | |
| Molecular biomarker analysis \x96 Determination of the performance characteristics of qualitative measurement methods and validation of methods | |
| Nanomaterials \x96 Preparation of material safety data sheet (MSDS) | |
| Nanomaterials \x96 Preparation of safety data sheets (SDS) | |
| Nanomaterials \x96 Quantification of nano-object release from powders by generation of aerosols | |
| Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy | |
| Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis | |
| Nanotechnologies - Compilation and description of toxicological screening methods for manufactured nanomaterials | |
| Nanotechnologies - Considerations for the development of chemical nomenclature for selected nano-objects | |
| Nanotechnologies - Framework for identifying vocabulary development for nanotechnology applications in human healthcare | |
| Nanotechnologies - Materials specifications - Guidance on specifying nano-objects | |
| Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement | |
| Nanotechnologies - Nanoscale titanium dioxide in powder form - Characteristics and measurement | |
| Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 1: Principles and approaches | |
| Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Use of the control banding approach | |
| Nanotechnologies \x96 Characterization of carbon nanotube and carbon nanofibre aerosols to be used in inhalation toxicity tests | |
| Nanotechnologies \x96 Characterization of cellulose nanocrystals | |
| Nanotechnologies \x96 Characterization of multiwall carbon nanotubes \x96 Mesoscopic shape factors | |
| Nanotechnologies \x96 Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy | |
| Nanotechnologies \x96 Characterization of single-wall carbon nanotubes using thermogravimetric analysis | |
| Nanotechnologies \x96 Characterization of single-wall carbon nanotubes using ultraviolet-visible- near infrared (UV-Vis-NIR) absorption spectroscopy | |
| Nanotechnologies \x96 Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry | |
| Nanotechnologies \x96 Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials | |
| Nanotechnologies \x96 Considerations for in vitro studies of airborne nano-objects and their aggregates and agglomerates (NOAA) | |
| Nanotechnologies \x96 Considerations for performing toxicokinetic studies with nanomaterials | |
| Nanotechnologies \x96 Considerations for radioisotope labelling methods of nanomaterials for performance evaluation | |
| Nanotechnologies \x96 Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices | |
| Nanotechnologies \x96 Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry | |
| Nanotechnologies \x96 Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus | |
| Nanotechnologies \x96 Guidance for developing representative test materials consisting of nano-objects in dry powder form | |
| Nanotechnologies \x96 High throughput screening method for nanoparticles toxicity using 3D model cells | |
| Nanotechnologies \x96 Matrix of properties and measurement techniques for graphene and related two-dimensional (2D) materials | |
| Nanotechnologies \x96 Measurement technique matrix for the characterization of nano-objects | |
| Nanotechnologies \x96 Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs) | |
| Nanotechnologies \x96 Plain language explanation of selected terms from the ISO/IEC 80004 series | |
| Nanotechnologies \x96 Sample preparation for the characterization of metal and metal-oxide nano-objects in water samples | |
| Nanotechnologies \x96 Superhydrophobic surfaces and coatings: Characteristics and performance assessment | |
| Nanotechnologies \x96 Textiles containing nanomaterials and nanostructures \x96 Superhydrophobic characteristics and durability assessment | |
| Natural gas \x96 Coal-based synthetic natural gas quality designation and the applicability of ISO/TC 193 standards | |
| Natural gas \x96 Odorization | |
| Non-active surgical implants \x96 Implant coating \x96 Part 2: Reference standards related to coatings | |
| Ophthalmic instruments - Background for light hazard specification in ophthalmic instrument standards | |
| Ophthalmic optics - Spectacle lenses - Parameters affecting lens power measurement | |
| Overview of methods available for particle-free erosion corrosion testing in flowing liquids | |
| Packaging and the environment - Processes for chemical recovery | |
| Packaging for terminally sterilized medical devices \x96 Guidance on the application of ISO 11607-1 and ISO 11607-2 | |
| Packaging material recycling - Report on substances and materials which may impede recycling | |
| Paints and varnishes \x96 Adhesion of coatings | |
| Paints and varnishes \x96 Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content \x96 Best practices for the selection of test methods | |
| Paints and varnishes \x96 Overview of test methods on hardness and wear resistance of coatings | |
| Personal protective equipment for firefighters \x96 Standard terms and definitions | |
| Petroleum and natural gas industries - Guidelines for the marine interfaces of hybrid LNG terminals | |
| Petroleum products \x96 Equivalency of test method determining the same property \x96 Part 100: Background and principle of the comparison and the evaluation of equivalency | |
| Petroleum products \x96 Equivalency of test method determining the same property \x96 Part 2: Density of petroleum products | |
| Petroleum products and lubricants \x96 Determination of rust-prevention characteristics of lubricating greases \x96 Part 2: Method with water wash-out | |
| Petroleum products and other liquids \x96 Guidance for flash point and combustibility testing | |
| Photography \x96 Archiving systems \x96 Part 1: Best practices for digital image capture of cultural heritage material | |
| Photography \x96 Guidelines for reliable testing of digital still cameras | |
| Photography \x96 Photographic reflection prints \x96 Part 1: Evaluation methods of image quality | |
| Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure \x96 Part 3: Fittings | |
| Piston-operated volumetric instruments \x96 Determination of uncertainty for volume measurements made using the photometric method | |
| Plastics \x96 Development and use of intermediate-scale fire tests for plastics products \x96 Part 2: Use of intermediate-scale tests for semi-finished and finished products | |
| Plastics \x96 Environmental aspects \x96 State of knowledge and methodologies | |
| Plastics \x96 Guidance on fire characteristics and fire performance of PVC materials used in building applications | |
| Plastics \x96 Recycling and recovery \x96 Necessity of standards | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x96 Part 7: Assessment of conformity | |
| PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring... | |
| Preparation of particulate reference materials \x96 Part 1: Polydisperse material based on picket fence of monodisperse spherical particles | |
| Preparation of steel substrates before application of paints and related products \x96 Collected information on the effect of levels of water-soluble salt contamination | |
| Pyrogenicity \x96 Principles and methods for pyrogen testing of medical devices | |
| Quality management - Customer satisfaction - Guidelines for monitoring and measuring | |
| Quality management systems \x96 Guidance for the application of ISO 19443:2018 | |
| Quality management systems \x96 Organizational change management \x96 Processes | |
| Quality management systems \x96 Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations | |
| Railway applications \x96 Rail project planning process \x96 Part 1: Stakeholders and their needs/interests | |
| Railway applications \x96 Rail project planning process \x96 Part 2: Conditions | |
| Railway applications \x96 Railway braking \x96 Country specific applications for ISO 20138-1 | |
| Railway applications \x96 Railway project planning process \x96 Guidance on railway project planning | |
| Railway infrastructure \x96 Rail mounted construction, maintenance and inspection machines \x96 Explanation of machine type | |
| Reaction-to-fire tests - Full-scale room test for surface products - Part 2: Technical background and guidance | |
| Reference data distribution in financial services | |
| Report of pilot testing on the application of ISO smart community infrastructures standards | |
| Review of geospatial and building information modelling (BIM) terminological entries | |
| Rheological test methods \x96 Fundamentals and interlaboratory comparisons \x96 Part 1: Determination of the yield point | |
| Rheological test methods \x96 Fundamentals and interlaboratory comparisons \x96 Part 2: Determination of the time-dependent structural change (thixotropy) | |
| Risk management of particulate contamination for devices with intravascular access | |
| Road vehicles \x96 Application of predictive maintenance to hardware with ISO 26262-5 | |
| Road vehicles \x96 Electrical disturbances from conduction and coupling \x96 Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637 | |
| Road vehicles \x96 Electrical disturbances from narrowband radiated electromagnetic energy \x96 Radiated immunity for V2X | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Part 4: Control | |
| Road vehicles \x96 Extended vehicle (ExVe) web services \x96 Result of the risk assessment on ISO 20078 series | |
| Road vehicles \x96 Functional safety \x96 Application to generic rechargeable energy storage systems for new energy vehicle | |
| Road vehicles \x96 Local Interconnect Network (LIN) \x96 Part 5: Application programmers interface (API) | |
| Road vehicles \x96 Software update over the air using mobile cellular network | |
| Road vehicles \x96 Solutions for remote access to vehicle \x96 Criteria for risk assessment | |
| Robotics \x96 Application of ISO 13482 \x96 Part 1: Safety-related test methods | |
| Robotics \x96 Application of ISO 13482 \x96 Part 2: Application guidelines | |
| Robotics \x96 Safety design for industrial robot systems \x96 Part 1: End-effectors | |
| Robotics \x96 Safety requirements for industrial robots \x96 Part 2: Manual load/unload stations | |
| Robots and robotic devices - Collaborative robots | |
| Rolling bearings \x96 Methods for calculating the modified reference rating life for universally loaded bearings | |
| Rotodynamic pumps \x96 Hydraulic performance acceptance test using a model pump | |
| Safety of machinery - Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts | |
| Safety of machinery - Guidelines for the understanding and use of safety of machinery standards | |
| Safety of machinery - Risk assessment - Part 2: Practical guidance and examples of methods | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 How ISO 12100 relates to ISO 13849-1 | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 1: How ISO 12100 relates to type-B and type-C standards | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 3: Implementation of ergonomic principles in safety standards | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects | |
| Safety of machinery \x96 Relationship with ISO 12100 \x96 Part 5: Implications of artificial intelligence machine learning | |
| Safety of machinery \x96 Safeguarding supportive system | |
| Safety of toys \x96 Part 8: Age determination \x96 First age grade for the appropriate play of toys | |
| Safety of toys \x96 Part 9: Safety aspects related to mechanical and physical properties \x96 Comparison of ISO 8124-1, EN 71-1, and ASTM F963 | |
| Security and resilience \x96 Urban resilience \x96 Framework and principles | |
| Selected illustrations of attribute agreement analysis | |
| Selected illustrations of full factorial experiments with four factors | |
| Series 1 freight containers - Rationale for structural test criteria - Amendment 1: Guidance on structural integrity | |
| Series 1 freight containers - Rationale for structural test criteria | |
| Series 1 freight containers \x96 Handling and securing \x96 Rationale for ISO 3874 Annex A | |
| Service activities relating to drinking water supply, wastewater and stormwater systems \x96 Examples of good practices for stormwater management | |
| Service activities relating to drinking water supply, wastewater and stormwater systems \x96 Hydraulic, mechanical and environmental conditions in wastewater transport systems | |
| Ships and marine technology \x96 Good practices of preventing capsizing during turning of ships with large profile height | |
| Sludge recovery, recycling, treatment and disposal \x96 Guidance on thermal treatment of sludge | |
| Smart community infrastructures - Review of existing activities relevant to metrics | |
| Smart community infrastructures \x96 Common framework for development and operation | |
| Smart community infrastructures \x96 Data exchange and sharing for the lamppost network in smart community | |
| Smart community infrastructures \x96 Disaster risk reduction \x96 Survey results and gap analysis | |
| Societal security - Technological capabilities | |
| Societal security \x96 Emergency management \x96 Message structure for exchange of information | |
| Soil quality - Detection of water soluble chromium(VI) using a ready-to-use test-kit method | |
| Soil quality - Determination of linear alkylbenzene sulfonate (LAS) - Method by HPLC with fluorescence detection (LC-FLD) and mass selective detection (LC-MSD) | |
| Soil quality - Determination of mercury - Cold vapour atomic fluorescence spectrometry (CVAFS) | |
| Soil quality - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates - Method by gas chromatography with mass selective detection (GC-MS) | |
| Soil quality - Effects of pollutants on mycorrhizal fungi - Spore germination test | |
| Soil quality \x96 Environmental availability of non-polar organic compounds \x96 Determination of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent | |
| Solid biofuels \x96 Bridging behaviour of bulk biofuels | |
| Solid mineral fuels \x96 Major and minor elements in hard coal ash and coke ash \x96 Wavelength dispersive X-ray fluorescence spectrometric method | |
| Solid recovered fuels \x96 Guidance for the specification of solid recovered fuels (SRF) for selected uses | |
| Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials | |
| Spherical plain bearings \x96 Derivation of the load rating factors | |
| Sports and recreational facilities \x96 Probes for entrapment/entanglem ent on playground equipment \x96 Collection of data | |
| Statistical analysis for evaluating the precision of binary measurement methods and their results | |
| Statistical methods for implementation of Six Sigma \x96 Selected illustration of analysis of variance | |
| Statistical methods in process management \x96 Capability and performance \x96 Part 4: Process capability estimates and performance measures | |
| Sterilization of health care products - Radiation sterilization - Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches | |
| Sterilization of health care products \x96 Radiation \x96 Part 4: Guidance on process control | |
| Sterilization of health care products \x96 Vocabulary | |
| Sterilization of healthcare products - Radiation sterilization - Product families and sampling plans for verification dose experiments and sterilization dose audits, and frequency of sterilization dose audits | |
| Sustainability in buildings and civil engineering works \x96 Guidelines on the application of the general principles in ISO 15392 | |
| Sustainable cities and communities \x96 Case studies in how smart city operating models support an effective public-health emergency response | |
| Sustainable development in communities \x96 Inventory of existing guidelines and approaches on sustainable development and resilience in cities | |
| Sustainable mobility and transportation \x96 Sustainable mobility services \x96 Part 1: Use cases | |
| Systems and software engineering \x96 Systems and software Quality Requirements and Evaluation (SQuaRE) \x96 General framework for Common Industry Format (CIF) for usability-related information | |
| Technical product documentation (TPD) - General principles of presentation - Part 71: Simplified representation for mechanical engineering drawings | |
| Technical product documentation - Reference designation system - Part 10: Power plants | |
| Technical product specification (TPS) \x96 Application guidance \x96 International model for national implementation | |
| Test code for machine tools - Part 8: Vibrations | |
| Test code for machine tools - Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 1: Test method for thermal stability | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 2: Test method for chemical resistance | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 3: Test method for water (wash out) resistance | |
| Test methods for repair materials for water-leakage cracks in underground concrete structures \x96 Part 4: Test method for adhesion on wet concrete surface | |
| Textiles and textile products \x96 Smart (Intelligent) textiles \x96 Definitions, categorisation, applications and standardization needs | |
| Thermoplastic pipes for the conveyance of fluids \x96 Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing | |
| Three statistical approaches for the assessment and interpretation of measurement uncertainty | |
| Timber structures \x96 Glued laminated timber \x96 Assignment of glued laminated timber characteristic values from laminate properties | |
| Timber structures \x96 Timber connections and assemblies \x96 Determination of yield and ultimate characteristics and ductility from test data | |
| Tourism and related services - Guidelines on developing environmental specifications for accommodation establishments | |
| Tracheobronchial tubes - Recommendations for size designation and labelling | |
| Traditional Chinese medicine \x96 Priority list of single herbal medicines for developing standards | |
| Translation projects - General guidance | |
| Transport information and control systems - Traffic Impediment Warning Systems (TIWS) - System requirements | |
| Transportation of CO2 by ship | |
| UAS traffic management (UTM) \x96 Part 1: Survey results on UTM | |
| Validation method for fire gas analysis \x96 Part 3: Considerations related to interlaboratory trials | |
| Visualization elements of digital twin \x96 Visualization fidelity | |
| Visualization elements of PLM-MES interface \x96 Part 1: Overview | |
| Water quality - Determination of polychlorinated naphthalenes (PCN) - Method using gas chromatography (GC) and mass spectrometry (MS) | |
| Water quality \x96 Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR) \x96 Part 2: On-site methods | |
| Water quality \x96 Determination of selected parameters by discrete analysis systems \x96 Part 2: Chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric detection... | |
| Welding \x96 Best practices for specification and measurement of ferrite in stainless steel weld metal | |
| Welding \x96 Grouping systems for materials \x96 European materials | |
| Welding \x96 Grouping systems for materials \x96 Japanese materials | |
| Welding and allied processes - Guidelines for measurement of welding energies | |
| Wheelchair seating - Part 9: Clinical interface pressure mapping guidelines for seating | |
| Wheelchair seating \x96 Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity | |
| Wheelchair seating \x96 Part 12: Apparatus and method for cushion envelopment testing | |
| Wheelchair seating \x96 Part 14: Concepts related to managing external forces to maintain tissue integrity | |
| Wheelchair seating \x96 Part 15: Selection, placement and fixation of flexible postural support devices in seating | |
| Wheelchairs - Part 1: Guidelines for the application of the ISO 7176 series on wheelchairs | |
| Wheelchairs - Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5 | |
| Wood and wood-based products \x96 Background and examples of calculating contributions to carbon stored in harvested wood products (HWP) | |
| Wood and wood-based products \x96 Examples of calculating displacement potentials for wood-based products and considerations for further analyses |
| << Prev | Next >> |