Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
240
250
260
270
280
290
294
295
296
297
298
299
300
301
302
303
304
305
306
310
320
330
340
350
360
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 35 mm microcopying of maps and plans | |
| Anchorages for Seat Belts in Protective Cabs and Frames on Agricultural Tractors | |
| Apertures in Tinplate Containers to Receive Plug-In Plastics Closures | |
| apparatus for potentially explosive atmospheres Part 1: General requirements | |
| Bidets Part 1: Pedestal Bidets, over Rim Supply Only. Connecting Dimensions | |
| Bidets Part 2: Wall Hung Bidets, over Rim Supply Only. Connecting Dimensions | |
| Bidets Part 3: Vitreous China Bidets, over Rim Supply Only. Quality, Workmanship and Functional Dimensions Other Than Connecting Dimensions (Supplements BS 5505: Parts 1 and 2) | |
| BSI Electronic Book. Safety signs and symbols CD-ROM | |
| Building Construction. Stairs Part 2: Modular Coordination. Specification for Coordinating Dimensions for Stairs and Stair Openings | |
| Buildings and structures for agriculture - Part 0: Introduction | |
| Buildings and structures for agriculture - Part 20: Code of practice for general design considerations | |
| Buildings and structures for agriculture - Part 22: Code of practice for design, construction and loading | |
| Buildings and structures for agriculture - Part 30: Code of practice for control of infestation | |
| Buildings and Structures for Agriculture - Part 31: Guide to the Storage and Handling of Waste | |
| Buildings and structures for agriculture - Part 50: Code of practice for design, construction and use of storage tanks and reception pits for livestock slurry | |
| Buildings and structures for agriculture - Part 60: Code of practice for design and construction of buildings for mushrooms | |
| Buildings and structures for agriculture - Part 65: Code of practice for design and construction of crop processing buildings | |
| Buildings and structures for agriculture - Part 66: Code of practice for design and construction of chitting houses | |
| Buildings and structures for agriculture - Part 70: Code of practice for design and construction of ventilated on floor stores for combinable crops | |
| Buildings and structures for agriculture - Part 71: Code of practice for design and construction of ventilated stores for potatoes and onions | |
| Buildings and structures for agriculture - Part 72: Code of practice for design and construction of controlled environment stores for vegetables, fruit and flowers | |
| Buildings and Structures for Agriculture - Part 74: Code of Practice for Design and Construction of Bins and Silos for Combinable Crops | |
| Buildings and structures for agriculture - Part 81. Code of practice for design and construction of chemical stores | |
| Buildings and Structures for Agriculture Part 25: Code of Practice for Design and Installation of Services and Facilities | |
| Buildings and Structures for Agriculture Part 33: Guide to the Control of Odour Pollution | |
| Buildings and Structures for Agriculture Part 40: Code of Practice for Design and Construction of Cattle Buildings | |
| Buildings and Structures for Agriculture Part 50: Code of Practice for Design, Construction and Use of Storage Tanks and Reception Pits for Livestock Slurry | |
| Buildings and Structures for Agriculture Part 51: Code of Practice for Design and Construction of Slatted, Perforated and Mesh Floors for Livestock | |
| Buildings and Structures for Agriculture Part 52: Code of Practice for Design of Alarm Systems and Emergency Ventilation for Livestock Housing | |
| Buildings and Structures for Agriculture Part 75: Code of Practice for the Design and Construction of Forage Stores | |
| Buildings and Structures for Agriculture Part 82: Code of Practice for Design of Amenity Buildings | |
| Calculators and Adding Machines Part 3: Specification for Keytop and Printed or Displayed Symbols | |
| Calculators and Adding Machines Part 4: Glossary of Terms for Calculators | |
| Cement Concrete Cylindrical Pipes and Tubes (Not Reinforced) | |
| Cinematography - Part 1: 8 mm film - Section 1.3 Camera usage - Subsection 1.3.3 Specification for claw-to-gate distance in 8 mm Type R spool-loading cinematograph equipment | |
| Cinematography - Part 1: 8 mm Film - Section 1.3: Camera Usage - Subsection 1.3.1: Camera Usage of 8 mm Type R Motion-Picture Film | |
| Cinematography - Part 1: 8 mm Film - Section 1.4: Sound - Subsection 1.4.3: Location and Width of Magnetic Stripping and Gaps of Recording and Reproducing Heads for Magnetic Sound... | |
| Cinematography - Part 1: 8 mm Film - Section 1.4: Sound - Subsection 1.4.5: Specification for Position and Width Dimensions of Photographic Sound Record on 8 mm Type S Motion-Picture... | |
| Cinematography - Part 1: 8 mm Film - Section 1.4: Sound - Subsection 1.4.6: Recorded Characteristics for Magnetic Sound Record on 8 mm Type S Motion-Picture Prints and Full-Coat Magnetic... | |
| Cinematography - Part 1: 8 mm Film - Section 1.6: Splices - Subsection 1.6.1: Dimensions of Cemented or Welded Splices on 8 mm Type S Motion-Picture Film for Projector Use... | |
| Cinematography - Part 2: 16 mm film - Section 2.11 Spindles - Subsection 2.11.2 Specification for dimensions of precision grade spindles for 16 mm cinematograph equipment and telecine machines | |
| Cinematography - Part 2: 16 mm film - Section 2.12 Miscellaneous - Subsection 2.12.1 Specification for test film for assessing the picture performance of 16 mm motion-picture projectors | |
| Cinematography - Part 2: 16 mm film - Section 2.7 Projection - Subsection 2.7.2 Specification for the performance of 16 mm sound-film projectors | |
| Cinematography - Part 2: 16 mm film - Section 2.9 Projector spools - Subsection 2.9.2 Specification for spools for 16 mm motion picture projectors (from244 m to 610 m capacity:... | |
| Cinematography - Part 2: 16 mm film - Section 2.9 Projector spools - Subsection 2.9.3 Specification for 16 mm film spools of 732 m capacity (43 cm size) for specialized... | |
| Cinematography - Part 2: 16mm Film - Section 2.2: Image Areas - Subsection 2.2.1: Position and Dimensions of the Image Produced by 16 mm Motion-Picture Camera Aperture | |
| Cinematography - Part 2: 16mm Film - Section 2.2: Image Areas - Subsection 2.2.3: Positions and Dimensions of Picture Image Area and Photographic Sound Record on 16 mm Motion-Picture Release... | |
| Cinematography - Part 2: 16mm Film - Section 2.4: Sound - Subsection 2.4.1: Positions and Dimensions of 16 mm Negative Photographic Sound Record on 16 mm, 35/32 mm and 35/16... | |
| Cinematography - Part 3: 35 mm film - Section 3.10 Sprockets - Subsection 3.10.2 Specification for universal sprockets for 35 mm perforated film. | |
| Cinematography - Part 3: 35 mm film - Section 3.12 Miscellaneous - Subsection 3.12.1 Specification for metal cans for processed 35 mm motion-picture film | |
| Cinematography - Part 3: 35 mm film - Section 3.4 Sound - Subsection 3.4.8 Specification for the lateral positions and width dimensions of two-track negative photographic sound records on 35... | |
| Cinematography - Part 3: 35 mm film - Section 3.9 Projector spools - Subsection 3.9.1 Specification for 35 mm film spools of 610 m capacity (38 cm size) for release... | |
| Cinematography - Part 4: 65 mm and 70 mm Film - Section 4.4: Sound - Subsection 4.4.1: Specifications for the Location and Dimensions of Six-Track Magnetic Sound Records on 70... | |
| Cinematography - Part 5: Common to More Than One Gauge - Section 5.4: Sound - Subsection 5.4.6: Method for Measurement of the Signal to Noise Ratio of 8 mm Type... | |
| Cinematography - Part 6: Television Usage - Section 6.1: Specification for Motion-Picture Prints and Sound Records for International Exchange of Television Programmes | |
| Cinematography - Part 6: Television usage - Section 6.4 Recommendations for the density range, contrast and colour balance of films and slides for colour television | |
| Cinematography - Part 6: Television Usage - Section 6.5: Colours, Luminances and Dimensions for Viewing Conditions for the Evaluation of Films and Slides for Television | |
| Cinematography - Part 7: Production and Presentation - Part 7.4: Sound - Subsection 7.4.2: Specification for Maximum Recording Levels for Commercials and Trailers | |
| Cinematography - Part 7: Production and presentation - Section 7.1 Light sources and lighting - Subsection 7.1.1 Specification for exciter lamps | |
| Cinematography - Part 7: Production and presentation - Section 7.2 Screens and screen luminance - Subsection 7.2.5 Specification for cinematograph screens | |
| Cinematography - Part 7: Production and presentation - Section 7.5 Film and television location lighting - Subsection 7.5.2 Specification for location lighting power distribution units | |
| Cinematography - Part 7: Production and presentation - Section 7.5 Film and television location lighting - Subsection 7.5.3 Specification for plugs and socket connectors | |
| Cinematography - Part 7: Production and presentation - Section 7.5 Film and television location lighting - Subsection 7.5.4 Specification for single pole high current plugs and socket connectors | |
| Cinematography - Part 9: 17.5mm Film - Section 9.4: Sound - Subsection 9.4.1: The Positions and Width Dimensions of Recording Head Gaps for Two Sound Records on 17.5mm Magnetic Film... | |
| Cinematography \x97 Part 1: 8 mm film \x97 Section 1.11 Spindles \x97 Subsection 1.11.1 Specification for dimensions of spindles for 8 mm Type S motion-picture projector spools | |
| Cinematography \x97 Part 1: 8 mm film \x97 Section 1.2 Image areas \x97 Subsection 1.2.1 Specification for positions and dimensions of the image area produced by camera aperture and maximum... | |
| Cinematography \x97 Part 2: 16 mm film \x97 Section 2.11 Spindles \x97 Subsection 2.11.1 Specification for dimensions of spindles for 16 mm motion-picture camera and projector spools | |
| Cinematography \x97 Part 2: 16 mm film \x97 Section 2.4 Sound \x97 Subsection 2.4.4 Specification for positions and width dimensions of recording head gaps for two sound records on 16... | |
| Cinematography \x97 Part 3: 35 mm film \x97 Section 3.1 Raw stock \x97 Subsection 3.1.2 Specification for the dimensional features of magnetic coatings on 35 mm perforated film | |
| Cinematography \x97 Part 3: 35 mm film \x97 Section 3.4 Sound \x97 Subsection 3.4.9 Specification for reproduction characteristics of the A-chain frequency response for 35 mm photographic sound | |
| Cinematography \x97 Part 5: Common to more than one film gauge \x97 Section 5.4 Sound \x97 Subsection 5.4.3 Specification for positions and width dimensions of recording and reproducing head gaps... | |
| Cinematography \x97 Part 5: Common to more than one film gauge \x97 Section 5.5 Printing \x97 Subsection 5.5.1 Specification for optical printing ratios for enlargement and reduction of motion-picture film... | |
| Cinematography Part 1: 8 mm Film Section 1.1: Raw Stock Subsection 1.1.2: Cutting and Perforating Dimensions of Motion- Picture Film 16/8S (1-3) and (1-4) | |
| Cinematography Part 1: 8 mm Film Section 1.1: Raw Stock Subsection 1.1.3: Cutting and Perforating Dimensions of 35 mm Motion-Picture Film Perforated 8 mm Type S (1-3-5-7-0 or 1-0) | |
| Cinematography Part 1: 8 mm Film Section 1.1: Raw Stock Subsection 1.1.4: Cutting and Perforating Dimensions of 16 mm Motion-Picture Film Perforated 8 mm Type R | |
| Cinematography Part 1: 8 mm Film Section 1.2: Image Area Subsection 1.2.4: Positions and Dimensions of Printed 8 mm Type S Image Area on 35 mm Motion-Picture Film Perforated 8... | |
| Cinematography Part 1: 8 mm Film Section 1.2: Image Areas Subsection 1.2.2: Specification for Positions and Dimensions of the Image Area Produced by 8 mm Type S Motion-Picture Camera Aperture... | |
| Cinematography Part 1: 8 mm Film Section 1.2: Image Areas Subsection 1.2.3: The Location of the Printed Image Area for Printing to 8 mm Type S on 16 mm Motion-Picture... | |
| Cinematography Part 1: 8 mm Film Section 1.2: Image Areas Subsection 1.2.5: Position and Dimensions of Printed 8 mm Type S Image Area on 16 mm Motion-Picture Film Perforated 8... | |
| Cinematography Part 1: 8 mm Film Section 1.3: Camera Usage Subsection 1.3.2: Camera Usage of 8 mm Picture Film Perforated Type S | |
| Cinematography Part 1: 8 mm Film Section 1.4: Sound Subsection 1.4.1: Positions and Width Dimensions of Magnetic Stripes for Sound Records on 35 mm Motion- Picture Film Perforated 8 mm... | |
| Cinematography Part 1: 8 mm Film Section 1.4: Sound Subsection 1.4.2: Positions and Width Dimensions of Magnetic Stripes for Sound Records on 16 mm Motion-Picture Film Perforated 8 mm Type... | |
| Cinematography Part 1: 8 mm Film Section 1.4: Sound Subsection 1.4.4: Positions and Width Dimensionsof Magnetic Strips and Recording Head Gaps for Sound Record on 8 mm Type S Motion-Picture... | |
| Cinematography Part 1: 8 mm Film Section 1.6: Splices Subsection 1.6.2: Dimensions of Tape Splices for 8 mm Type S Motion-Picture Film for Projector Use | |
| Cinematography Part 1: 8 mm Film Section 1.7: Projection Subsection 1.7.1: Specification for Projector Usage of 8 mm Type S Motion-Picture Film for Direct Front Projection | |
| Cinematography Part 1: 8 mm Film Section: 1.1: Raw Stock Subsection 1.1.1: Cutting and Perforating Dimensions of 8 mm Type S Motion-Picture Raw Stock Film | |
| Cinematography Part 2: 16 mm Film Section 2.3 Camera usage Subsection 2.3.1: Specification for Camera Usage of 16 mm Motion-Picture Film | |
| Cinematography Part 2: 16 mm Film Section 2.4 Sound Subsection 2.4.6 Specification for Positions and Width Dimensions of Magnetic Stripes and Magnetic Recording Head Gaps for Sound Record on 16... | |
| Cinematography Part 2: 16mm Film Section 2.1: Raw Stock Subsection 2.1.1: Specification for Dimensions of 16 mm Motion-Picture Film | |
| Cinematography Part 2: 16mm Film Section 2.1: Raw Stock Subsection 2.1.2: Specification for Cutting and Perforating Dimensions of 35 mm Motion-Picture Film Perforated (1-3-0) | |
| Cinematography Part 2: 16mm Film Section 2.2: Image Area Subsection 2.2.4: Position and Dimensions of the Image Produced By Camera Aperture Type W on 16 mm Motion-Picture Film | |
| Cinematography Part 2: 16mm Film Section 2.2: Image Areas Subsection 2.2.2: Dimensions and Location of the Projectable Image Area on 16 mm Motion- Picture Prints | |
| Cinematography Part 2: 16mm Film Section 2.9: Projector Spools Subsection 2.9.1: Dimensions of Spools for 16 mm Motion-Picture Projectors (Up to and Including 120 m Capacity: 18 cm Size) | |
| Cinematography Part 3. 35 mm film Section 3.10 Sprockets Subsection 3.10.1 Specification for Broad Tooth Sprockets for 35 mm perforated film | |
| Cinematography Part 3: 35 mm Film Section 3.1: Raw Stock Subsection 3.1.1: Cutting and Perforating Dimensions of 35 mm Motion-Picture Film and Magnetic Film | |
| Cinematography Part 3: 35 mm Film Section 3.2: Image Areas Subsection 3.2.3: Positions and Dimensions of the Picture Image Area and Photographic Sound Record on 35 mm Motion-Picture Release Prints... | |
| Cinematography Part 3: 35 mm Film Section 3.3: Camera Usage Subsection 3.3.1: Camera Usage of 35 mm Motion-Picture Film | |
| Cinematography Part 3: 35 mm Film Section 3.4: Sound Subsection 3.4.1: Positions and Width Dimensions of 35 mm Negative Photographic Sound Record on 35 mm Motion- Picture Film | |
| Cinematography Part 3: 35 mm Film Section 3.4: Sound Subsection 3.4.2: Recorded Characteristics for Magnetic Sound Records on 35 mm Motion-Picture Film | |
| Cinematography Part 3: 35 mm Film Section 3.4: Sound Subsection 3.4.7: Lateral Positions and Width Dimensions of Two- Track Photographic Sound Records on 35 mm Motion-Picture Prints | |
| Cinematography Part 4: 65 mm and 70 mm Film Sect. 4.4: Sound Subsec. 4.4.2: Specification for the Reproduction Chars. of the A-Chain Frequency Response for 70 mm Motion-Picture Release Prints... | |
| Cinematography Part 4: 65 mm and 70 mm Film Section 4.1: Raw Stock Subsection 4.1.1: Cutting and Perforating Dimensions of 65 mm and 70 mm Motion-Picture Film | |
| Cinematography Part 4: 65 mm and 70 mm Film Section 4.2: Image Areas Subsection 4.2.1: Positions and Dimensions of Image Area Produced by 65 mm and 70 mm Motion-Picture Camera... | |
| Cinematography Part 5. Common to More Than One Gauge Section 5.5 Printing Subsection 5.5.2 Specification for Leaders and Run-Out Trailers for 35 mm and 16 mm Release Prints | |
| Cinematography Part 5: Common to More Than One Film Gauge Section 5.1: Raw Stock Subsection 5.1.2: Specification for the Minimum Information for the Labelling of Containers for Raw Stock Motion-Picture... | |
| Cinematography Part 5: Common to More Than One Gauge Section 5.12: Miscellaneous Subsection 5.12.2: The Minimum Information for the Labelling of Containers for the Exchange of Motion Picture Film and... | |
| Cinematography Part 5: Common to More Than One Gauge Section 5.1: Raw Stock Subsection 5.1.1: Definition, Testing and Marking of Testing and Marking of Motion- Picture Safety Film | |
| Cinematography Part 5: Common to More Than One Gauge Section 5.1: Raw Stock Subsection Specification for Dimensions and Locations of the Maximum Permissible Area for Subtitles on 35 mm and... | |
| Cinematography Part 5: Common to More Than One Gauge Section 5.4: Sound Subsection 5.4.2: Photographic Monophonic Sound and Test Films | |
| Cinematography Part 5: Common to More Than One Gauge Section 5.4: Sound Subsection 5.4.4: Specification for the Recorded Characteristic for Audio Records on 35 mm and 70 mm Motion-Picture Release... | |
| Cinematography Part 5: Common to More Than One Gauge Section 5.4: Sound Subsection 5.4.5: Basic Technical Characteristic of Magnetic Sound Test Films Excluding Striped Release Prints | |
| Cinematography Part 5: Common to More Than One Guage Section 5.6: Splices Subsection 5.6.1: Dimensions and Locations of Splices for Use on 70 mm, 65 mm, 35 mm, and 16... | |
| Cinematography Part 7: Production and Presentation Section 7.2: Screens and Screen Luminance Subsection 7.2.6: Specification for Screen Luminance and Colour for the Projection of Motion -Picture Prints in Indoor Theatres... | |
| Cinematography Part 7: Production and Presentation Section 7.5: Film and Television Location Lighting Subsection 7.5.1: Code of Practice for Distribution of A.C. Electricity for Location Lighting | |
| Cinematography Part 8. Glossaries Section 8.1 Glossary of Terms Used in the Motion-Picture Industry | |
| Cinematography. 16 mm film. Projection. Specification for projector usage of 16 mm motion-picture films for direct front projection | |
| Cinematography. 16 mm film. Sound. Specification for recording charateristics for magnetic sound record on 16 mm motion-picture film | |
| Cinematography. 35 mm film. Image areas. Specification for the image area produced by camera aperture for 35 mm motion-picture film | |
| Cinematography. 35 mm film. Image areas. Specification for the projectable image area of 35 mm motion-picture film | |
| Cinematography. 35 mm film. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for four magnetic sound records on 35 mm motion-picture film containing no picture... | |
| Cinematography. 35 mm film. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture... | |
| Cinematography. 35 mm film. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for three magnetic sound records on 35 mm motion-picture film containing no picture... | |
| Cinematography. Common to more than one film gauge. Miscellaneous. Specification for the dimensions of cores for motion-picture and magnetic film rolls | |
| Cinematography. Common to more than one film gauge. Sound. Code of practice for the identification of pulse systems for synchronization of unperforated audio tape with motion-picture film | |
| Cinematography. Production and presentation. Auditoria and control rooms. Specification and measurements for the electro-acoustic response of motion-picture control rooms and indoor theatres | |
| Cinematography. Production and presentation | |
| Cinematography. Television usage. Recommendations for the density and contrast range of monochrome films, slides and photographic opaques for television | |
| Coated Abrasives Flap Wheels with Incorporated Flanges or Separate Flanges. Designation and Dimensions | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 1: General Considerations Section 1.5: Services | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 2. General Considerations Section 2.1 General Design and Planning | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 2. Special considerations Section 2.2 Livestock Buildings | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 2: General Considerations Section 2.3: Storage, Conditioning and Processing Buildings | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 2: General Considerations Section 2.4: Crop Production Buildings | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 2: Special Considerations Section 2.5 Service Buildings | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 3. Appendices: Legislation, Technical Data and References Section 3.5. Reference Data: Environment | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 3. Appendices: Legislation, Technical Data and References Section 3.8. Dimensional Coordination | |
| Code of practice for Design of Buildings and Structures for Agriculture Part 3. Appendices: Legislation, Technical Data, relevant standards and other references Section 3.11. External Colours for Farm Buildings | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Accuracy of building dimensions | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Biological data: pests and infestation | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Checklist of attributes of new materials | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Legislation | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Reference books and leaflets | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Reference data: space | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Relevant standards | |
| Code of practice for design of buildings and structures for agriculture. Appendices: legislation, technical data, relevant standards and other references. Water requirements | |
| Code of practice for design of buildings and structures for agriculture. General considerations. Design, construction and loading | |
| Code of practice for design of buildings and structures for agriculture. General considerations. Fire protection | |
| Code of practice for design of buildings and structures for agriculture. General considerations. Human and animal welfare | |
| Code of practice for design of buildings and structures for agriculture. General considerations. Insulation | |
| Code of practice for design of buildings and structures for agriculture. General considerations. Introduction | |
| Code of practice for design of buildings and structures for agriculture. General considerations. Materials | |
| Code of Practice for Documentation of Computer-Based Systems | |
| Code of Practice for Domestic Butane- and Propane-Gas-Burning Installations Part 3: Installations in Boats, Yachts and Other Vessels | |
| Code of practice for Domestic butane- and propanegas- bu rni ng installations Part 2. Installations in caravans and non-permanent dwellings | |
| Code of Practice for In-Core Instrumentation for Neutron Fluence Rate (Flux) Measurements in Power Reactors | |
| Code of Practice for Internal Plastering | |
| Code of Practice for Preservation of Timber | |
| Code of Practice for Protective Coating of Iron and Steel Structures Against Corrosion | |
| Code of practice for road lighting. General principles | |
| Code of Practice for Safety in Erecting Structural Frames | |
| Code of Practice for Safety Precautions in the Construction of Large Diameter Boreholes for Piling and Other Purposes | |
| Code of Practice for Sanitary Pipework | |
| Code of practice for slating and tiling (including shingles) | |
| Code of Practice for Slating and Tiling Part 1: Design | |
| Code of Practice for Slating and Tiling Part 2: Design Charts for Fixing Roof Slating and Tiling Against Wind Uplift | |
| Code of practice for the design of road lighting - Part 1: Lighting of roads and public amenity areas | |
| Code of practice for the design of road lighting - Part 2: Lighting of tunnels | |
| Code of practice on road lighting. Lighting for roads with special requirements (Group F) | |
| Code of practice on road lighting. Lighting for single-level road junctions, including roundabouts (Group C) | |
| Code of practice on road lighting. Lighting for town and city centres and areas of civic importance (Group G) | |
| Code of practice on road lighting. Lighting for underpasses and bridged roads (Group E) | |
| Controllers with Analogue Signals for Use in Industrial- Process Control Systems Part 1: Methods for Evaluating Performance | |
| Controllers with Analogue Signals for Use in Industrial-Process Control Systems Part 2: Guide to Inspection and Routine Testing | |
| Design and Installation of Sloping and Vertical Patent Glazing | |
| Design of Buildings and Structures for Agriculture Part 11: Guide to Regulations and Sources of Information | |
| Design of Buildings and Structures for Agriculture Part 21: Code of Practice for Selection and Use of Construction Materials | |
| Design of Buildings and Structures for Agriculture Part 22: Code of Practice for Design, Construction and Loading | |
| Design of Buildings and Structures for Agriculture Part 23: Code of Practice for Fire Precautions | |
| Design of Buildings and Structures for Agriculture Part 32: Guide to Noise Attenuation | |
| Design of Buildings and Structures for Agriculture Part 3: Appendices: Legislation, Technical Data and References Section 3.2: Reference Data: Roof and Wall Sheeting and Durability of Materials | |
| Design of Buildings and Structures for Agriculture Part 41: Code of Practice for Design and Construction of Sheep Buildings and Pens | |
| Design of Buildings and Structures for Agriculture Part 42: Code of Practice for Design and Construction of Pig Buildings | |
| Design of Buildings and Structures for Agriculture Part 43: Code of Practice for Design and Construction of Poultry Buildings | |
| Design of Buildings and Structures for Agriculture Part 49: Code of Practice for Design and Construction of Milking Premises | |
| Design of Buildings and Structures for Agriculture Part 80: Code of Practice for Design and Construction of Workshops, Maintenance and Inspection Facilities | |
| Diesel Fuels. Determination of Ignition Quality. Cetane Method | |
| Dimensions of Metric Long Arbors and Their Accessories for Milling Machines | |
| Domestic Butane- And Propane-Gas-Burning Installations Part 1: Specification for Installations at Permanent Dwellings | |
| Duplicators and Document Copying Machines Part 1: Attachment Features of Plates of Offset Duplicators | |
| Duplicators and Document Copying Machines Part 2: Minimum Overprint and Attachment Features of Stencils for Duplicators | |
| Duplicators and Document Copying Machines Part 3: Glossary of Terms for Duplicators | |
| Duplicators and Document Copying Machines Part 4: Glossary of Terms for Document Copying Machines | |
| Dynamic Load Ratings and Rating Life of Rolling Bearings | |
| Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1 000 V and 1 900/3 300 V | |
| Electrical apparatus for potentially explosive atmospheres \x97 Part 8: Encapsulation \x93m\x94 | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 2: Oil Immersion 'o' | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 3: Pressurized Apparatus 'p' | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 4: Powder Filling 'q' | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 5: Flameproof Enclosure 'd' | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 6: Increased Safety 'e' | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 7: Intrinsic Safety 'i' | |
| Electrical Apparatus for Potentially Explosive Atmospheres Part 9: Specification for Intrinsically Safe Electrical Systems 'i' | |
| Evaluating Particulate Contamination of Hydraulic Fluids - Part 6: Method of Calibrating Liquid Automatic Particle-Count Instruments (Using Mono- Sized Latex Spheres) | |
| Evaluating Particulate Contamination of Hydraulic Fluids - Part 7: Method of Determining the Level of Contamination (by the Gravimetric Method) | |
| Evaluating Particulate Contamination of Hydraulic Fluids Part 1: Qualifying and Controlling of Cleaning Methods for Sample Containers | |
| Evaluating Particulate Contamination of Hydraulic Fluids Part 5: Method of Reporting Contamination Analysis Data | |
| Evaluating Particulate Contamination of Hydraulic Fluids Part 8: Method of Determining the Level of Contamination (by the Counting Method Using a Microscope) | |
| Evaluating particulate contamination of hydraulic fluids. Method of defining levels of contamination (solid contaminant code) | |
| Fertilizers - Part 4. Chemical analysis - Section 4.2 Determination of Phosphorous - Subsection 4.2.2 Extraction of Phosphates Soluble in mineral acids | |
| Fertilizers - Part 4: Chemical Analysis - Section 4.2: Determination of Phosphorous - Subsection 4.2.3: Method for Determination of Phosphorous Content (Quinoline Molybdophosphate Gravimetric Method) | |
| Fertilizers Part 1: Terminology and Labelling Section 1.2: Glossary of Terms | |
| Fertilizers Part 1: Terminology and Labelling Section 1.3: Marking of Containers (Packages, Drums, Etc) and Labels | |
| Fertilizers Part 2: Sampling Section 2.10: Method of Checking the Performance of Mechanical Devices for Sampling of Solid Fertilizer Moving in Bulk | |
| Fertilizers Part 2: Sampling Section 2.11: De-Aeration of Suspension Samples by Film Disentrainment | |
| Fertilizers Part 2: Sampling Section 2.12: Preliminary Visual Examination and Preparation of Samples of Fluid Fertilizers for Physical Testing | |
| Fertilizers Part 2: Sampling Section 2.1: Simple Sampling Method for Small Lots of Solid Fertilizer | |
| Fertilizers Part 2: Sampling Section 2.2: Presentation of Sampling Reports | |
| Fertilizers Part 2: Sampling Section 2.3: Sampling from a Conveyor by Stopping the Belt (Reference Method) | |
| Fertilizers Part 2: Sampling Section 2.4: Practical Arrangements for Final Samples | |
| Fertilizers Part 2: Sampling Section 2.5: Method for Reduction of Samples of Solid Fertilizers | |
| Fertilizers Part 2: Sampling Section 2.6: Guide to Derivation of a Sampling Plan for the Evaluation of a Large Delivery of Solid Fertilizer | |
| Fertilizers Part 2: Sampling Section 2.7: Recommendations for Minimum Mass of Increment of a Solid Fertilizer to Be Taken to Be Representative of the Total Sampling Unit | |
| Fertilizers Part 2: Sampling Section 2.8: Methods for Preparation of Samples of Solid Fertilizer for Chemical and Physical Analysis | |
| Fertilizers Part 2: Sampling Section 2.9: Sampling Plan for the Evaluation of a Large Delivery of Solid Fertilizer | |
| Fertilizers Part 3 Physical Properties Section 3.6 Method for Determination of Static Angle of Repose of Solid Fertilizers | |
| Fertilizers Part 3: Physical Properties Section 3.1: Method for Determination of Bulk Density (Loose) | |
| Fertilizers Part 3: Physical Properties Section 3.2: Method for Determination of Bulk Density (Tapped) | |
| Fertilizers Part 3: Physical Properties Section 3.3: Method for Determination of Bulk Density (Loose) of Fine-Grained Fertilizers | |
| Fertilizers Part 3: Physical Properties Section 3.4: Method for Determination of Oil Retention of High Nitrogen Content, Straight Ammonium Nitrate Fertilizers | |
| Fertilizers Part 3: Physical Properties Section 3.5: Method for Determination of Particle Size Distribution by Test Sieving | |
| Fertilizers Part 4: Chemical Analysis Sec 4 Determination of Nitro- gen Subsection 4.1.4: Method for Determination of Ammoniacal Nitrogen Content in the Presence of Other Substance Which Rel Ammonia When... | |
| Fertilizers Part 4: Chemical Analysis Sec 4.1: Determination of Nitrogen Subsection 4.1.5: Method for Determination of Urea Nitrogen Content (Gravimetric Method Using Xanthydrol) | |
| Fertilizers Part 4: Chemical Analysis Section 4.1: Determination of Nitrogen Subsection 4.1.1: Nitron Gravimetric Method for Determination of Nitrate Nitrogen | |
| Fertilizers Part 4: Chemical Analysis Section 4.1: Determination of Nitrogen Subsection 4.1.2: Determination of Ammoniacal Nitrogen, Titrimetric Method After Distillations | |
| Fertilizers Part 4: Chemical Analysis Section 4.1: Determination of Nitrogen Subsection 4.1.3: Method for Determination of Total Nitrogen Content (Titrimetric Method After Distillation) | |
| Fertilizers Part 4: Chemical Analysis Section 4.2: Determination of Phosphorous Subsection 4.2.1: Extraction of Water- Soluble Phosphates | |
| Fertilizers Part 4: Chemical Analysis Section 4.3: Determination of Potassium Subsection 4.3.1: Preparation of the Test Solution for Determination of Water- Soluble Potassium Content | |
| Fertilizers Part 4: Chemical Analysis Section 4.3: Determination of Potassium Subsection 4.3.2: Preparation of the Test Solution for Determination of Acid- Soluble Potassium Content | |
| Fertilizers Part 4: Chemical Analysis Section 4.3: Determination of Potassium Subsection 4.3.3: Potassium Tetaphenylborate Gravimetric Methods | |
| Fertilizers Part 4: Chemical Analysis Section 4.4: Determination of Water Subsection 4.4.1: Gravimetric Method by Drying Under Reduced Pressure | |
| Fertilizers Part 4: Chemical Analysis Section 4.4: Determination of Water Subsection 4.4.2: Gravimetric Method by Drying at 105 Degrees C | |
| Fertilizers Part 4: Chemical Analysis Section 4.5: Method for Determination of Mineral-Acid-Soluble Sulfate Content of Solid Fertilizers | |
| Fertilizers Part 4: Chemical Analysis Section 4: Determination of Potassium Subsection 4.3.4: Determination of Potassium Content (Titrimetric Method) | |
| Fertilizers Section 1.1: Terminology and Labelling Section 1.1: Classification | |
| Fire precautions in the design and construction of buildings - Part 9: Code of practice for ventilation and air conditioning ductwork | |
| Fire Precautions in the Design and Construction of Buildings Part 1: Residential Buildings Section 1.1: Code of Practice for Single-Family Dwelling Houses | |
| Fire Precautions in the Design and Construction of Buildings Part 2: Code of Practice for Shops | |
| Fire Precautions in the Design and Construction of Buildings Part 3. Code of Practice for Office Buildings | |
| Fire Precautions in the Design and Construction of Buildings Part 4: Code of Practice for Smoke Control in Protected Escape Routes Using Pressurization | |
| Fire Precautions in the Design and Construction of Buildings Part 5: Code of Practice for Firefighting Stairs and Lifts | |
| Fire Precautions in the Design and Construction of Buildings Part 8: Code of Practice for Means of Escape for Disabled People | |
| Fire Precautions in the Design, and Construction of Buildings Part 1: Code of Practice for Residential Buildings | |
| Fire precautions in the design, construction and use of buildings - Part 12: Managing fire safety | |
| Fire precautions in the design, construction and use of buildings Part 0. Guide to fire safety codes of practice for particular premises/application s | |
| Fire precautions in the design, construction and use of buildings Part 10: Code of practice for shopping complexes | |
| Fire Precautions in the Design, Construction and Use of Buildings Part 11: Code of Practice for Shops, Offices, Industrial, Storage and Other Similar Buildings | |
| Fire Precautions in the Design, Construction and Use of Buildings Part 6: Code of Practice for Places of Assembly | |
| Fire Precautions in the Design, Construction and Use of Buildings Part 7: Code of Practice for the Incorporation of Atria in Buildings | |
| Fire Safety Signs, Notices and Graphic Symbols Part 2: Self-Luminous Fire Safety Signs | |
| Fire safety signs, notices and graphic symbols. Part 3: Specification for internally-illuminat ed fire safety signs | |
| Fire safety signs, notices and graphic symbols. Specification for fire safety signs | |
| Folding Wheelchairs for Adults | |
| Footwear with Midsole Protection Part 1: Specification for Lined Vulcanized Rubber Footwear with Penetration Resistant Midsoles | |
| Footwear with midsole protection. Part 2: Specification for lined or unlined polyvinyl chloride (PVC) footwear with penetration resistant midsoles | |
| General Requirements for Dimensions and Pressure Ratings for Pipe of Thermoplastics Materials (Metric Series) | |
| Glossary of Terms for Textiles. Weaves. Definitions of General Terms and Basic Weaves | |
| Glossary of Terms Relating to Coffee and Its Products | |
| Graphical Symbols and Signs - Safety Signs, Including Fire Safety Signs - Part 11: Water Safety Signs | |
| Graphical Symbols and Signs - Safety Signs, Including Fire Safety Signs - Part 5: Signs with Specific Safety Meanings | |
| Graphical symbols and signs - Safety signs, including fire safety signs - Part 6: Creation and design of graphical symbols for use in safety signs - Requirements | |
| Guidance for the selection and use of safety signs and fire safety notices | |
| Guide for the Sampling of Gases and of Oil from Oil-Filled Electrical Equipment and for the Analysis of Free and Dissolved Gases | |
| Guide to a Modular Instrumentation System for Data Handling: CAMAC System | |
| Hermetically sealed metal cans for food and drink - specifications | |
| High tensile structural steel for bridges, etc., and general building construction | |
| High-Voltage Switches Part 1: High-Voltage Switches for Rated Voltages Above 1kV and Less Than 52 kV | |
| High-Voltage Switches Part 2: High-Voltage Switches for Rated Voltages of 52 kV and Above | |
| Impregnated Paper- Insulated Cables With Aluminium Sheath/Neutral Conductor and Three Shaped Solid Aluminium Phase Conductors (CONSAC) 500/1000 V, for Electricity Supply | |
| Interchangeable magnetic twelve-disk pack for information processing. Part 1: Specification for 100 Mbytes magnetic twelve-disk pack | |
| Interchangeable magnetic twelve-disk pack for information processing. Part 2: Specification for 200 Mbytes magnetic twelve-disk pack | |
| Interior and exterior signs Part 1: Design, manufacture and installation of signs \x96 Specification | |
| Laboratory d.c. Resistors | |
| Low Voltage Switchgear and Controlgear for Industrial Use. Terminal Marking and Distinctive Number. General Rules | |
| Low-Voltage Switch-Gear and Controlgear for Industrial Use. Terminal Marking, Distinctive Number and Distinctive Letter for Particular Contactor Relays (Detailed Rules Based on the General Rules of BS 5472: 1977) | |
| Low-Voltage Switchgear and Controlgear Assemblies Part 11: Particular Requirements of Fuseboards | |
| Low-Voltage Switchgear and Controlgear Assemblies Part 12: Particular Requirements of Type- Tested Miniature Circuit-Breaker Boards | |
| Low-Voltage Switchgear and Controlgear Assemblies Part 13: Specification for Particular Requirements of Consumer Units | |
| Method for evaluation of vulcanization characteristics for raw styrene-butadiene rubber (SBR) masterbatches with carbon black or carbon black and oil (including test recipe) | |
| Method for evaluation of vulcanization characteristics of non oil-extended solution-polymerized polyisoprene rubbers | |
| Method for Visual assessment, by grid assay, of dirt in paper for character recognition | |
| Methods for Corrosion Testing of Metallic Coatings Part 10: Rating of Test Specimens with Coatings Anodic to the Substrate | |
| Methods for Corrosion Testing of Metallic Coatings Part 1: Neutral Salt Spray Test (NSS Test) | |
| Methods for Corrosion Testing of Metallic Coatings Part 4: Thioacetamide Test (TAA Test) | |
| Methods for Corrosion Testing of Metallic Coatings Part 5: Corrodkote Test (CORR Test) | |
| Methods for Corrosion Testing of Metallic Coatings Part 6: Ratings of Results of Corrosion Tests on Electroplated Coatings Cathodic to the Substrate | |
| Methods for Corrosion Testing of Metallic Coatings Part 7: Guidance on Stationary Outdoor Exposure Corrosion Tests | |
| Methods for Corrosion Testing of Metallic Coatings Part 8: Sulphur Dioxide Test with General Condensation of Moisture | |
| Methods for Corrosion Testing of Metallic Coatings Part 9: Saline Droplets Corrosion Test (SD Test) | |
| Methods for detection of foreign fats in dairy products. Detection of vegetable fat by gas-liquid chromatography of sterols (reference method) | |
| Methods for detection of foreign fats in dairy products. Detection of vegetable fat by the phytosteryl acetate test | |
| Methods for determination of maximum travel speed of agricultural wheeled tractors | |
| Methods of evaluating the performance of controllers with analogue signals for use in industrial process control | |
| Methods of Sampling and Test for Halogenated Hydrocarbons - Part 1: Sampling of Liquid Products | |
| Methods of Sampling and Test for Halogenated Hydrocarbons - Part 2: Sampling of Liquefied Gases | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 10: Determination of Impurities in Methyl Chloride, Gas Chromatographic Method | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 11: Determination of 'Inert' Gas Content of Chlorofluorohydrocar bons Gas Chromatographic Method, General Purposes | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 3: Determination of Residue on Evaporation | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 4: Determination of Acidity, Titrimetric Method | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 5: Determination of Cloud Point | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 6: Determination of Acidity of Fluorochlorinated Hydrocarbons | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 8: Determination of Non-Volatile Residue in Fluorinated Hydrocarbons | |
| Methods of Sampling and Test for Halogenated Hydrocarbons Part 9: Determination of Boiling Range of Chlorofluorinated Hydrocarbons | |
| Methods of Sampling and Test for the Halogenated Hydrocarbons Part 7: Methods of Test for Methyl Chloride and Ethyl Chloride | |
| Methods of test for Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids | |
| Methods of test for Falsework equipment - Part 1: Floor centres | |
| Methods of test for Falsework equipment - Part 3: Props | |
| Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.11: Determination of Apparent Hardness Subsection 3.11.2: Case Hardened Ferrous Materials, Surface Enriched by Carbon or Carbon and Nitrogen... | |
| Milk and Milk Products. Determination of Fat Content. Mojonnier- Type Fat Extraction Flasks | |
| Milking machine installations. Methods for mechanical testing | |
| Milking machine installations. Specification for construction and performance | |
| Milking machine installations. Vocabulary | |
| Objective Measurement of Radio-Frequency Protection Ratios in LF, MF and HF Broadcasting - Section 10A-1 - Amplitude-Modulation Sound Broadcasting in Bands 5 (LF), 6 (MF) and 7 (HF) | |
| OBJECTIVE MEASUREMENT OF RADIO-FREQUENCY PROTECTION RATIOS IN LF, MF AND HF BROADCASTING | |
| Operator's Controls on Excavators Used for Earth Moving | |
| Optical character recognition - Part 1: Character set OCR-A - Shapes and dimensions of the printed image | |
| Optical Character Recognition Part 2: Character Set OCR-B. Shapes and Dimensions of the Printed Image | |
| Optical Character Recognition Part 3: Method of Coding Machine Readable Characters (ICR and OCR) for Information Processing | |
| Part 6: Television Usage Section 6.3: Position and Dimensions of Picture Areas for Motion-Picture Films and Slides for Television | |
| Patent glazing and sloping glazing for buildings - Part 1: Code of practice for design and installation of sloping and vertical patent glazing | |
| Patent glazing and sloping glazing for buildings - Part 2: Code of practice for sloping glazing | |
| Performance Requirements and Tests for Office Furniture Part 1: Desks and Tables | |
| Photographic Grade Boric Acid | |
| Photographic Grade Sodium Acetate, Anhydrous | |
| Photographic Grade Sodium Carbonate, Monohydrate | |
| Portable Bore-Hole Logging Equipment (Down to 300 m): General Characteristics | |
| Powder Metallurgical Material and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.12: Determination of Practical Size by Dry Sieving | |
| Powder Metallurgical Materials and Products - Part 1: General Information - Section 1.1: Introduction and Contents | |
| Powder Metallurgical Materials and Products Part 1: General Information Section 1.2: Glossary of Terms | |
| Powder metallurgical materials and products Part 2. Methods of sampling and testing metallic powders Section 2.9 Determination of acid-insoluble content in iron, copper, tin and bronze powders | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Sec 2.2: Determination of Apparent Density Subsection 2.2.1: Funnel Method | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.10: Sampling and Testing of Hardmetal Powders Using Sintered Test Pieces | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.11: Determination of the Lubricant Content of Lubricated Metallic Powders: Soxhlet Extraction Method | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.1: Sampling | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.2: Determination of Apparent Density by the Cup and Funnel Method Subsection 2.2.3: Oscillating Funnel... | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.6: Determination of Flowability by Means of a Calibrated Funnel (Hall Flowmeter) | |
| Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.8: Determination of Loss of Mass on Hydrogen Reduction (Hydrogen Loss) | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Sec 3.11: Determination of Apparent Hardness: Subsec 3.11.1: Materials of Essentially Uniform Section... | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Sec 3.1: Determination of Density for Impermeable Sintered Metal Materials | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Sec 3.2: Determination of Density Oil Content and Porosity | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.10: Fatigues Test Pieces | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.3: Preparation of Samples for Chemical Analysis for Determination of Carbon Content... | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.5: Determination of Bubble Test Pore Size for Permeable Sintered Metal Materials... | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.6: Determination of Fluid Permeability | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.8: Determination of Transverse Rupture Strength | |
| Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.9: Determination of Radial Crushing Strength for Sintered Metal Bushes | |
| Powder metallurgical materials and products Part 4. Methods of testing and chemical analysis of hardmetals Section 4.1 3 Metallographic determination of microstructure | |
| Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of apparent density by the cup and funnel method | |
| Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of compactibility (compressibility) in uniaxial compression excluding powders for hardmetals | |
| Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of green strength by transverse rupture of rectangular compacts | |
| Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of tap density | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of contents of metallic elements by X-ray fluorescence: solution method | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of titanium content: photometric peroxide method | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of total carbon: gravimetric method | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Sampling and testing of sintered hardmetals | |
| Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Tensile test pieces | |
| Powder Metallurgical Materials Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.7: Determination of Dimensional Changes Associated With Compacting and Sintering, Excluding Powders for Hardmetals | |
| Precision of test methods. Guide for the determination of repeatability and reproducibility for a standard test method | |
| Radiation Detectors for the Instrumentation and Protection of Nuclear Reactors: Characteristics and Test Methods | |
| Rating and Testing Unit Air Conditioners of Above 7 kW Cooling Capacity | |
| Reciprocating Internal Combustion Engines: Performance Part 4: Speed Governing | |
| Reciprocating Internal Combustion Engines: Performance Part 6: Specification for Overspeed Protection | |
| Reciprocating Internal Combustion Engines: Performance Part 7: Codes for Engine Power | |
| Reciprocating internal combustion engines: performance. Specification for standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption | |
| Recommendations for decision tables used in data processing | |
| Recommendations for installed exposure rate meters, warning assemblies and monitors for X or gamma radiation of energy between 80 keV and 3 MeV | |
| Recommendations for safety features of camping tents | |
| Recommendations for the Storage and Exhibition of Archival Documents | |
| Ribbons and Spools Used on Office Machines and Data Processing Equipment Part 1: Minimum Markings to Appear on Containers of Printing Ribbons | |
| Ribbons and Spools Used on Office Machines and Data Processing Equipment Part 2: Specification for Widths of Fabric Printing Ribbons on Spools up to 19 mm Wide | |
| Ribbons and Spools Used on Office Machines and Data Processing Equipment Part 3: Widths of One- Time Paper or Plastic Printing Ribbons up to 19 mm Wide and Marking to... | |
| Ribbons and Spools Used on Office Machines and Data Processing Equipment Part 4: Characteristics of Cores for Paper or Plastic Printing Ribbons | |
| Ribbons and Spools Used on Office Machines and Data Processing Equipment Part 5: Recommendations for Widths of Fabric Printing Ribbons on Spools Exceeding 19 mm Wide | |
| Road lighting - Part 2: Code of practice for lighting for traffic routes | |
| Road Lighting Part 10. Code of practice for lighting for motorways | |
| Road Lighting Part 3: Code of Practice for Lighting for Subsidiary Roads and Associated Pedestrian Areas | |
| Road Lighting Part 5: Code of Practice for Lighting for Grade- Separated Junctions | |
| Road Lighting Part 6: Code of Practice for Lighting for Bridges and Elevated Roads | |
| Roll-Over Protective Structures on Earth- Moving Machinery: Laboratory Tests and Performance Requirements Part 1: Crawler, Wheel Loaders and Tractors, Backhoe Loaders,Graders, Tractor Scrapers and Articulated Steel Dumpers | |
| Safety of Hand Operated Paper Cutting Machines | |
| Safety Requirements for Indicating and Recording Electrical Measuring Instruments and Their Accessories | |
| Safety Requirements in Rotary Milking Parlours | |
| Safety Signs, Including Fire Safety Signs - Part 4: Code of Practice for Escape Route Signing | |
| Safety signs, including fire safety signs Part 10: Code of practice for the use of safety signs, including fire safety signs | |
| Secification for Minimum Operator Space Envelope for Earth- Moving Machinery | |
| Sensory Analysis Apparatus Part 1: Wine-Tasting Glass | |
| Service Tools Used with Earth-Moving Machinery Part 2: Guide to Common Repair Tools: Mechanical Pullers and Pushers | |
| SI Units and Recommendations for the Use of Their Multiples and of Certain Other Units | |
| Size Designation of Clothes. Definitions and Body Measurement Procedure | |
| Size Designation of Clothes. Headwear | |
| Slating and tiling for pitched roofs and vertical cladding \x96 Code of practice | |
| Specification for 35 mm Microcopying of Newspaper Cuttings on A6 Microfiche | |
| Specification for A.C. Switches of Rated Voltage Above 1 kV | |
| Specification for amyl acetate | |
| Specification for Anti-Bandit Glazing (Glazing Resistant to Manual Attack) | |
| Specification for armoured cables with thermosetting insulation for electricity supply | |
| Specification for Calculators and adding machines - Part 2: Layout of function keys on adding machines | |
| Specification for Calculators and Adding Machines Part 1: Numeric Section of Ten-Key Keyboards for Calculators and Adding Machines | |
| Specification for Classification of Degrees of Protection Provided by Enclosures | |
| Specification for cross-linked polyethylene insulation of electric cables | |
| Specification for diacetone alcohol | |
| Specification for Dimensions of test tubes made of glass or plastics for radioactivity measurements | |
| Specification for dimensions of vials for liquid scintillation counting | |
| Specification for electric signs and high-voltage luminous-discharge-t ube installations | |
| Specification for Electrically Conducting and Antistatic Rubber Footwear | |
| Specification for electrode wires and fluxes for the submerged arc welding of austenitic stainless steels based on weld metal composition | |
| Specification for Electronic Variable Control Switches (Dimmer Switches) for Tungsten Filament Lighting | |
| Specification for ethyl acetate | |
| Specification for Evaluating particulate contamination of hydraulic fluids - Part 3: Methods of bottling fluid samples | |
| Specification for Evaluating Particulate Contamination of Hydraulic Fluids Part 2: Method of Calibrating Liquid Automatic Particle Count Instruments (Using AC Fine Test Dust Contaminant) | |
| Specification for factory-built assemblies of switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. General requirements | |
| Specification for factory-built assemblies of switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Particular requirements for busbar trunking systems (busways) | |
| Specification for Falling-Object Protective Structures on Earth Moving Machinery: Laboratory Test and Performance Requirements | |
| Specification for forms design sheet and layout chart | |
| Specification for gas taps for domestic and catering appliances | |
| Specification for Glass alcohol hydrometers not incorporating a thermometer | |
| Specification for Glass Reinforced Plastics (GRP) Pipes and Fittings for Use for Water Supply or Sewerage Part 1: Dimensions, Materials and Classification | |
| Specification for Glass Reinforced Plastics (GRP) Pipes and Fittings for Use for Water Supply or Sewerage Part 2: Design and Performance Requirements | |
| Specification for Glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage | |
| Specification for Hard anodic oxide coatings on aluminium for engineering purposes | |
| Specification for hard ethylene propylene rubber insulation of electric cables | |
| Specification for High-Voltage Fuses for the External Protection of Shunt Power Capacitors | |
| Specification for high-voltage metal-enclosed switchgear for rated voltages of 72.5 kV and above | |
| Specification for Hospital Hollow-Ware Made of Plastics Material | |
| Specification for identification of apparatus terminals and general rules for a uniform system of terminal marking, using an alphanumeric notation | |
| Specification for inductive proximity switch. Form A, for direct current, 3 or 4 terminals | |
| Specification for Installation of gas hot water supplies for domestic purposes (1st, 2nd and 3rd family gases) | |
| Specification for Laboratory Evaluations of Roll-Over and Falling-Object Protective Structures: the Deflection-Limiting Volume for Earth-Moving Machinery | |
| Specification for Leaf chains, clevises and sheaves | |
| Specification for Low voltage switchgear and controlgear for industrial use - Mounting rails - Top hat rails 75 mm wide for snap-on mounting of equipment | |
| Specification for Low voltage switchgear and controlgear for industrial use - Mounting rails Top hat rails 35 mm wide for snap-on mounting of equipment | |
| Specification for Low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for auxiliary contacts of particular contactors | |
| Specification for Low- Voltage Switchgear and Controlgear for Industrial Use. Terminal Marking and Distinctive Number for Particular Control Switches | |
| Specification for maintenance and adjustment tools for earth-moving machinery | |
| Specification for Modular Plug-in Unit and Standard 19 Inch Rack Mounting Unit Based on NIM Standard (for Electronic Nuclear Instruments) | |
| Specification for n-butyl acetate | |
| Specification for Nickel Anodes, Anode Nickel and Nickel Salts for Electroplating | |
| Specification for Non-Refillable Plastics Aerosol Dispensers up to 1000 mL Capacity | |
| Specification for office machines - line and character capacity of address masters | |
| Specification for performance requirements and tests for office furniture - Part 2: Office pedestal seating for use by persons weighing up to 150 kg and for use up to 24... | |
| Specification for Performance requirements and tests for office furniture - Part 3: Storage furniture | |
| Specification for performance requirements and tests for office furniture. Adjustable chairs | |
| Specification for Photographic Grade Glacial Acetic Acid | |
| Specification for Plastics Catering Containers and Lids | |
| Specification for Plugs Made of Resilient Material - Two-Pole and Earthing-Pin Plugs, Socket-Outlets, and Socket-Outlet Adaptors for Circuits up to 250 Volts | |
| Specification for Polyurethane Coated Nylon Fabric for Mattress Covers | |
| Specification for preparation of technical drawings and diagrams for microfilming | |
| Specification for program network charts | |
| Specification for Reciprocating Internal Combustion Engines: Performance - Part 5: Torsional Vibrations | |
| Specification for reciprocating internal combustion engines: performance. Test measurements | |
| Specification for reciprocating internal combustion engines: performance. Test methods | |
| Specification for Right angle and box angle plates | |
| Specification for roll-over protective structures on earth-moving machinery: laboratory tests and performance requirements | |
| Specification for Rolling Bearings - Dynamic Load Ratings and Rating Life Part 1: Calculation Methods | |
| Specification for Screw Thread Metric Series Measuring Cylinders | |
| Specification for sizes of hardwoods and methods of measurement | |
| Specification for Specification for Spools for copper wire | |
| Specification for spinal and abdominal fabric supports | |
| Specification for Spools for 1 in (25.4 mm) Video Magnetic Tape | |
| Specification for Standard Reference Conditions for Measurement of Petroleum Liquids and Gases | |
| Specification for Table Cutlery | |
| Specification for textile machinery and accessories - bearings for bottom rollers and allied dimensions - caps with central nose and caps with side lugs | |
| Specification for textile machinery and accessories - condenser bobbins for woollen spinning - dimensions | |
| Specification for textile machinery and accessories - types of formers for yarn packages - nomenclature | |
| Specification for Thermometer for use with alcohol hydrometers | |
| Specification for tungsten filament miscellaneous electric lamps | |
| Specification for unfired fusion welded pressure vessels | |
| Statistical Terminology Part 1: Glossary of Terms Relating to Probability and General Terms Relating to Statistics | |
| Statistical terminology. Glossary of terms relating to the design of experiments | |
| Textile Floor Coverings - Vocabulary | |
| Tracked Changes (Redline) - Code of practice for the design of road lighting \x97 Part 2: Lighting of tunnels | |
| Tracked Changes (Redline) - Design of road lighting Part 1: Lighting of roads and public amenity areas \x97 Code of practice | |
| Tracked Changes (Redline) - Interior and exterior signs - Part 1: Design, manufacture and installation of signs - Specification | |
| Two-Pole and Earthing Pin-Plugs, Socket- Outlets and Socket- Outlet Adaptors for Circuits up to 250 Volts | |
| Unfired Fusion Welded Pressure Vessels Enquiry Cases: Introduction | |
| Unplasticized PVC Pipe and Fittings for Gravity Sewers | |
| Vacuum Technology - Graphical Symbols | |
| Vitreous China Bowl Urinals. Rimless Type | |
| Vitreous China Washdown WC Pans with Horizontal Outlet Part 1: Connecting Dimensions | |
| Vitreous China Washdown WC Pans with Horizontal Outlet Part 3: WC Pans with Horizontal Outlet for Use with 7.5L Maximum Flush Capacity Cisterns | |
| Vitreous China Washdown WC Pans with Horizontal Outlets Part 2: Materials, Quality, Performance and Dimensions Other Than Connecting Dimensions | |
| Wall Hung WC Pan Part 4: Specification for Wall Hung WC Pans for Use with 7.5L Maximum Flush Capacity Cisterns | |
| Wall Hung WC Pans Part 1: Wall Hung WC Pans with Close Coupled Cistern. Connecting Dimensions | |
| Wall Hung WC Pans Part 2: Wall Hung WC Pan with Independent Water Supply. Connecting Dimensions | |
| Wall Hung WC Pans Part 3: Materials, Quality and Functional Dimensions Other Than Connecting Dimensions (Supplements BS 5504: Parts 1 and 2) | |
| Wash Basins Part 1: Pedestal Wash Basins. Connecting Dimensions | |
| Wash Basins Part 2: Wall Hung Wash Basins. Connecting Dimensions | |
| Wash Basins Part 3: Wash Basins (One or Three Tap Holes). Materials, Quality, Design and Construction |
| << Prev | Next >> |