Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
630
640
650
660
670
680
684
685
686
687
688
689
690
691
692
693
694
695
696
700
710
720
730
740
750
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment | |
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning | |
| Acoustics \x96 Determination of airflow resistance \x96 Part 1: Static airflow method (ISO 9053-1:2018) | |
| Acoustics \x96 Determination of airflow resistance \x96 Part 2: Alternating airflow method (ISO 9053-2:2020) | |
| Acoustics \x96 Determination of occupational noise exposure \x96 Methodology (ISO 9612:2025) | |
| Acoustics \x96 Determination of sound power levels of noise sources using sound intensity \x96 Part 1: Measurement at discrete points | |
| Acoustics \x96 Determination of sound power levels of noise sources using sound intensity \x96 Part 3: Precision method for measurement by scanning | |
| Adhesives - Animal glues - Methods of sampling and testing | |
| Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints | |
| Adhesives - Test method for shear impact strength of adhesive bonds | |
| Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear | |
| Adhesives for thermoplastic piping systems - Part 1: Determination of film properties | |
| Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength | |
| Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure | |
| Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods | |
| Air quality - Definition and determination of performance characteristics of an automatic measuring system | |
| Aluminium caps for transfusion, infusion and injection bottles \x96 General requirements and test methods | |
| Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml | |
| Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of... | |
| Animal and vegetable fats and oils - Determination of residual technical hexane content | |
| Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography | |
| Animal and vegetable fats and oils \x96 Determination of water content \x96 Karl Fischer method (pyridine free) (ISO 8534:2017) | |
| Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method | |
| Anodizing of aluminium and its alloys \x96 Rating system for the evaluation of pitting corrosion \x96 Chart method | |
| Anodizing of aluminium and its alloys \x96 Rating system for the evaluation of pitting corrosion \x96 Grid method | |
| Approval testing of welders \x96 Fusion welding \x96 Part 3: Copper and copper alloys | |
| Approval testing of welders \x96 Fusion welding \x96 Part 4: Nickel and nickel alloys | |
| Approval testing of welders \x96 Fusion welding \x96 Part 5: Titanium and titanium alloys, zirconium and zirconium alloys | |
| Aromatic natural raw materials \x96 Vocabulary | |
| Awnings for leisure accommodation vehicles \x96 Requirements and test methods (ISO 8936:2017) | |
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures | |
| Building construction \x96 Jointing products \x96 Determination of adhesion/cohesion properties of sealants at constant temperature | |
| Cardiovascular implants and extracorporeal systems \x96 Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters | |
| Cardiovascular implants and extracorporeal systems \x96 Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators | |
| Cellular plastics, rigid - Test methods for self-skinned, high-density materials | |
| Cheese, cheese rind and processed cheese \x96 Determination of natamycin content \x96 Part 1: Molecular absorption spectrometric method for cheese rind | |
| Cheese, cheese rind and processed cheese \x96 Determination of natamycin content \x96 Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese | |
| Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets | |
| Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths | |
| Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet | |
| Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate | |
| Conveyor belts \x96 Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres | |
| Corrosion tests in artificial atmospheres - Salt spray tests | |
| Corrosion tests in artificial atmospheres \x96 Salt spray tests (ISO 9227:2022) | |
| Crude petroleum - Determination of water - Distillation method | |
| Decontamination of radioactively contaminated surfaces \x96 Testing of decontamination agents for textiles (ISO 9271:2023) | |
| Dentistry - Extraction forceps - Part 2: Designation | |
| Dentistry - Extraction forceps - Part 3: Design | |
| Dentistry - Graphical symbols for dental equipment | |
| Dentistry - Hose connectors for air driven dental handpieces | |
| Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements | |
| Dentistry \x96 Brazing materials | |
| Dentistry \x96 Compatibility testing \x96 Part 1: Metal-ceramic systems | |
| Dentistry \x96 Compatibility testing \x96 Part 2: Ceramic-ceramic systems | |
| Dentistry \x96 Extraction forceps \x96 Part 1: General requirements (ISO 9173-1:2016) | |
| Dentistry \x96 Graphical symbols for dental equipment (ISO 9687:2015/Amd 1:2018) | |
| Dentistry \x96 Intra-oral mirrors (ISO 9873:2017) | |
| Dentistry \x96 Operating lights | |
| Dentistry \x96 Water-based cements \x96 Part 2: Resin-modified cements | |
| Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints | |
| Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints | |
| Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination | |
| Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints | |
| Destructive tests on welds in metallic materials \x96 Fracture test | |
| Determination of sustained combustibility of liquids | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2: Identification and characterization | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use \x96 Part 3: Determination of released-particle count \x96 Amendment 1 (ISO 8871-3:2003/Amd 1:2018) | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use \x96 Part 5: Functional requirements and testing | |
| Elastomeric parts for parenterals and for devices for pharmaceuticals use - Part 3: Determination of released-particle count | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements | |
| Ergonomic requirements for office work with visual display terminals (VDTs) \x96 Part 11: Guidance on usability | |
| Ergonomics - Assessment of speech communication | |
| Ergonomics - Evaluation of thermal strain by physiological measurements | |
| Ergonomics of human-system interaction - Part 110: Dialogue principles | |
| Ergonomics of human-system interaction - Part 129: Guidance on software individualization | |
| Ergonomics of human-system interaction - Part 143: Forms | |
| Ergonomics of human-system interaction - Part 151: Guidance on World Wide Web user interfaces | |
| Ergonomics of human-system interaction - Part 154: Interactive voice response (IVR) applications | |
| Ergonomics of human-system interaction - Part 161: Guidance on visual user-interface elements | |
| Ergonomics of human-system interaction - Part 171: Guidance on software accessibility (ISO 9241-171:2008) | |
| Ergonomics of human-system interaction - Part 171: Guidance on software accessibility | |
| Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements | |
| Ergonomics of human-system interaction - Part 302: Terminology for electronic visual displays | |
| Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays | |
| Ergonomics of human-system interaction - Part 304: User performance test methods for electronic visual displays | |
| Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays | |
| Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays | |
| Ergonomics of human-system interaction - Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures | |
| Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices | |
| Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices | |
| Ergonomics of human-system interaction - Part 420: Selection of physical input devices | |
| Ergonomics of human-system interaction - Part 910: Framework for tactile and haptic interaction | |
| Ergonomics of human-system interaction \x96 Part 112: Principles for the presentation of information (ISO 9241-112:2025) | |
| Ergonomics of human-system interaction \x96 Part 115: Guidance on conceptual design, user-system interaction design, user interface design, and navigation design (ISO 9241-115:2024) | |
| Ergonomics of human-system interaction \x96 Part 20: Accessibility guidelines for information/communic ation technology (ICT) equipment and services | |
| Ergonomics of human-system interaction \x96 Part 210: Human-centred design for interactive systems | |
| Ergonomics of human-system interaction \x96 Part 220: Processes for enabling, executing and assessing human-centred design within organizations (ISO 9241-220:2019) | |
| Ergonomics of human-system interaction \x96 Part 306: Field assessment methods for electronic visual displays | |
| Ergonomics of human-system interaction \x96 Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017) | |
| Ergonomics of human-system interaction \x96 Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images (ISO 9241-392:2015) | |
| Ergonomics of human-system interaction \x96 Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images (ISO 9241-394:2020) | |
| Ergonomics of human-system interaction \x96 Part 920: Guidance on tactile and haptic interactions (ISO 9241-920:2009) | |
| Ergonomics of human-system interaction \x96 Part 940: Evaluation of tactile and haptic interactions (ISO 9241-940:2017) | |
| Ergonomics of human-system interaction \x96 Part 960: Framework and guidance for gesture interactions (ISO 9241-960:2017) | |
| Ergonomics of human-system interaction \x96 Part 971: Accessibility of tactile/haptic interactive systems (ISO 9241-971:2020) | |
| Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble | |
| Ergonomics of the thermal environment \x96 Determination of metabolic heat production | |
| Extracorporeal systems for blood purification \x96 Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators | |
| Extracorporeal systems for blood purification \x96 Part 2: Extracorporeal blood and fluid circuits for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637-2:2024) | |
| Fasteners \x96 Bolts, screws and studs \x96 Nominal lengths and thread lengths (ISO 888:2012) | |
| Fibre ropes \x96 General specifications | |
| Galvanic anodes for cathodic protection in seawater and saline sediments (ISO 9351:2025) | |
| Gas cylinders \x96 Design, construction and testing of refillable seamless steel gas cylinders and tubes \x96 Part 4: Stainless steel cylinders with an Rm value of less than 1 100... | |
| Gas cylinders \x96 Refillable seamless steel gas cylinders \x96 Design, construction and testing \x96 Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa | |
| Gas cylinders \x96 Refillable seamless steel gas cylinders \x96 Design, construction and testing \x96 Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1... | |
| Gas cylinders \x96 Refillable seamless steel gas cylinders \x96 Design, construction and testing \x96 Part 3: Normalized steel cylinders | |
| Gas tightness of equipment for gas welding and allied processes (ISO 9090:2019) | |
| Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes | |
| Gas welding equipment \x96 Air-aspirated hand blowpipes \x96 Specifications and tests | |
| Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics | |
| Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products | |
| Geosynthetics \x96 Determination of thickness at specified pressures \x96 Part 1: Single layers (ISO 9863-1:2016) | |
| Geosynthetics \x96 Determination of thickness at specified pressures \x96 Part 1: Single layers \x96 Amendment 1 (ISO 9863-1:2016/Amd 1:2019) | |
| Geosynthetics \x96 Sampling and preparation of test specimens | |
| Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products | |
| Glass containers - Vacuum lug finihses - Part 9: 63, 66 and 70 deep | |
| Glass containers - Vacuum lug finishes - Part 10: 77 regular | |
| Glass containers - Vacuum lug finishes - Part 11: 82 regular | |
| Glass containers - Vacuum lug finishes - Part 12: 89 regular | |
| Glass containers - Vacuum lug finishes - Part 13: 100 regular | |
| Glass containers - Vacuum lug finishes - Part 14: 110 regular | |
| Glass containers - Vacuum lug finishes - Part 1: Dimensions | |
| Glass containers - Vacuum lug finishes - Part 2: 33 medium | |
| Glass containers - Vacuum lug finishes - Part 3: 38 regular | |
| Glass containers - Vacuum lug finishes - Part 4: 38 medium | |
| Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular | |
| Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular | |
| Glass containers - Vacuum lug finishes - Part 7: 58 deep | |
| Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular | |
| Grooved pins - Half-length centre grooved | |
| Grooved pins - One-third-length centre grooved | |
| Grooved pins \x96 Full-length parallel grooved, with chamfer | |
| Grooved pins \x96 Full-length parallel grooved, with pilot | |
| Grooved pins \x96 Full-length taper grooved | |
| Grooved pins \x96 Half-length reverse-taper, grooved | |
| Grooved pins \x96 Half-length taper grooved | |
| Grooved pins with countersunk head | |
| Grooved pins with round head | |
| Hexagon head bolts with metric fine pitch thread \x96 Product grades A and B | |
| Hexagon head screws with metric fine pitch thread \x96 Product grades A and B | |
| Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B | |
| Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B | |
| Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B | |
| Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary | |
| Information and documentation \x96 Paper for documents \x96 Requirements for permanence | |
| Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO 8536-10:2015) | |
| Infusion equipment for medical use - Part 11: Infusion filters for single use with pressure infusion equipment (ISO 8536-11:2015) | |
| Infusion equipment for medical use - Part 1: Infusion glass bottles | |
| Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles | |
| Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed | |
| Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed | |
| Infusion equipment for medical use - Part 8: Infusion equipment for use with pressure infusion apparatus | |
| Infusion equipment for medical use - Part 9: Fluid lines for use with pressure infusion equipment | |
| Infusion equipment for medical use \x96 Part 12: Check valves for single use (ISO 8536-12:2021) | |
| Infusion equipment for medical use \x96 Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2024) | |
| Infusion equipment for medical use \x96 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016) | |
| Infusion equipment for medical use \x96 Part 15: Light-protective infusion sets for single use (ISO 8536-15:2022) | |
| Infusion equipment for medical use \x96 Part 15: Light-protective infusion sets for single use \x96 Amendment 1 (ISO 8536-15:2022/Amd 1:2023) | |
| Infusion equipment for medical use \x96 Part 2: Closures for infusion bottles | |
| Infusion equipment for medical use \x96 Part 3: Aluminium caps for infusion bottles \x96 Amendment 1 (ISO 8536-3:2009/Amd 1:2022) | |
| Injection equipment for medical use - Part 1: Ampoules for injectables | |
| Injection equipment for medical use - Part 2: One-point-cut (OPC) ampoules | |
| Jewellery \x96 Colours of gold alloys \x96 Definition, range of colours and designation (ISO 8654:2018) | |
| Jewellery \x96 Colours of gold alloys \x96 Definition, range of colours and designation \x96 Amendment 1 (ISO 8654:2018/Amd 1:2019) | |
| Jewellery \x96 Fineness of precious metal alloys (ISO 9202:2014) | |
| Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans | |
| Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers | |
| Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans | |
| Liquefied petroleum gases - Calculation method for density and vapour pressure | |
| Liquefied petroleum gases - Determination of hydrogen sulfide - Lead acetate method | |
| Liquefied petroleum gases \x96 Calculation method for density and vapour pressure \x96 Amendment 1 (ISO 8973:1997/Amd 1:2020) | |
| Managing for the sustained success of an organization - A quality management approach | |
| Manipulating industrial robots - Performance criteria and related test methods | |
| Measurement of gas flow by means of critical flow Venturi nozzles | |
| Measurement of radioactivity \x96 Alpha-, beta- and photon emitting radionuclides \x96 Reference measurement standard specifications for the calibration of surface contamination monitors (ISO 8769:2020) | |
| Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch... | |
| Mechanical properties of fasteners made of carbon steel and alloy steel \x96 Part 2: Nuts with specified property classes \x96 Coarse thread and fine pitch thread | |
| Mechanical properties of fasteners made of carbon steel and alloy steel \x96 Part 3: Flat washers with specified property classes (ISO 898-3:2018) | |
| Mechanical properties of fasteners made of carbon steel and alloy steel \x96 Part 3: Flat washers with specified property classes \x96 Amendment 1 (ISO 898-3:2018/Amd 1:2020) | |
| Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use | |
| Metal-ceramic dental restorative systems | |
| Metallic and other inorganic coatings \x96 Phosphate conversion coating of metals (ISO 9717:2024) | |
| Metallic coatings - Measurement of coating thickness - Scanning electron microscope method | |
| Metallic materials - Calibration of extensometer systems used in uniaxial testing | |
| Metals and alloys - Atmospheric corrosion testing - General requirements | |
| Microstructure of cast irons - Part 1: Graphite classification by visual analysis | |
| Microstructure of cast irons \x96 Part 1: Graphite classification by visual analysis | |
| Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) | |
| Milk and milk products - Determination of nitrogen content - Part 1: Kjeldahl principle and crude protein calculation | |
| Milk and milk products \x96 Determination of nitrogen content \x96 Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) | |
| Neurosurgical implants - Self-closing intracranial aneurysm clips | |
| Neutron reference radiation fields \x96 Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence (ISO 8529-3:2023,... | |
| Nickel-based alloys - Determination of resistance to intergranular corrosion | |
| Non-destructive testing - Magnetic particle testing - Part 1: General principles | |
| Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) | |
| Non-destructive testing - Magnetic particle testing - Part 3: Equipment | |
| Non-destructive testing - Qualification and certification of NDT personnel | |
| Nonwovens \x96 Test methods \x96 Part 3: Determination of tensile strength and elongation at break using the strip method (ISO 9073-3:2023) | |
| Nowovens \x96 Test methods \x96 Part 1: Determination of mass per unit area (ISO 9073-1:2023) | |
| Nuclear energy \x96 Nuclear fuel technology \x96 Determination of plutonium in nitric acid solutions by spectrophotometry (ISO 9463:2019) | |
| Oilseed residues - Determination of free residual hexane | |
| Oilseed residues - Determination of total residual hexane | |
| Ophthalmic instruments - Tonometers | |
| Ophthalmic instruments - Trial case lenses | |
| Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant | |
| Ophthalmic optics \x96 Spectacle frames \x96 Measuring system and terminology | |
| Ophthalmic optics \x96 Uncut finished spectacle lenses \x96 Part 1: Specifications for single-vision and multifocal lenses | |
| Ophthalmic optics \x96 Uncut finished spectacle lenses \x96 Part 2: Specifications for progressive power lenses | |
| Ophthalmic optics \x96 Uncut finished spectacle lenses \x96 Part 3: Transmittance specifications and test methods | |
| Ophthalmic optics \x96 Visual acuity testing \x96 Standard optotype and its presentation | |
| Optics and optical instruments - Focimeters - Part 1: General purpose instruments used for measuring spectacle lenses | |
| Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses | |
| Optics and optical instruments \x96 Test lenses for calibration of focimeters \x96 Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023) | |
| Ostomy collection bags - Part 2: Requirements and test methods | |
| Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time | |
| Paints and varnishes - Drying tests - Part 2: Pressure test for stackability | |
| Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini | |
| Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder | |
| Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test | |
| Paints and varnishes - Drying tests - Part 6: Print-free test | |
| Paints and varnishes \x96 Determination of the pot life of multicomponent coating systems \x96 Preparation and conditioning of samples and guidelines for testing | |
| Pallets for materials handling - Flat pallets - Part 1: Test methods | |
| Pallets for materials handling - Flat pallets - Part 3: Maximum working loads | |
| Pallets for materials handling \x96 Flat pallets \x96 Part 2: Performance requirements and selection of tests (ISO 8611-2:2011/Amd 1:2016) | |
| Pallets for materials handling \x96 Flat pallets \x96 Part 2: Performance requirements and selection of tests | |
| Parallel pins with internal thread, of hardened steel or martensitic stainless steel | |
| Parallel pins with internal thread, of unhardened steel and austenitic stainless steel | |
| Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) | |
| Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry | |
| Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments | |
| Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind | |
| Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - part 6: Dispersion using a triple-roll-mill | |
| Piston-operated volumetric apparatus \x96 Part 1: Terminology, general requirements and user recommendations | |
| Piston-operated volumetric apparatus \x96 Part 2: Piston pipettes | |
| Piston-operated volumetric apparatus \x96 Part 3: Piston burettes | |
| Piston-operated volumetric apparatus \x96 Part 4: Dilutors | |
| Piston-operated volumetric apparatus \x96 Part 5: Dispensers | |
| Piston-operated volumetric apparatus \x96 Part 6: Gravimetric methods for the determination of measurement error | |
| Piston-operated volumetric apparatus \x96 Part 7: Alternative measurement procedures for the determination of volume \x96 Amendment 1 (ISO 8655-7:2022/Amd 1:2024) | |
| Piston-operated volumetric apparatus \x96 Part 7: Non-gravimetric methods for the assessment of equipment performance | |
| Piston-operated volumetric apparatus \x96 Part 8: Photometric reference measurement procedure for the determination of volume (ISO 8655-8:2022) | |
| Piston-operated volumetric apparatus \x96 Part 9: Manually operated precision laboratory syringes (ISO 8655-9:2022) | |
| Plain washers for metric bolts, screws and nuts for general purposes - General plan | |
| Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content | |
| Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 | |
| Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading | |
| Plastics - Liquid phenolic resins - Determination af water miscibility | |
| Plastics - Methods of exposure to solar radiation - Part 1: General guidance | |
| Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass | |
| Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation | |
| Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate | |
| Plastics - Phenolic resins - Determination af the gel time at a given temperature using automatic apparatus | |
| Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts | |
| Plastics - Phenolic resins - Determination of hexamethylenetetrami ne content - Kjeldahl method, perchloric acid method and hydrochloric acid method | |
| Plastics - Phenolic resins - Determination of pH | |
| Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005) | |
| Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography | |
| Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions | |
| Plastics \x96 Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source \x96 Amendment 1: Specimens | |
| Plastics \x96 Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source | |
| Plastics \x96 Determination of creep behaviour \x96 Part 1: Tensile creep \x96 Amendment 1 | |
| Plastics \x96 Determination of creep behaviour \x96 Part 1: Tensile creep | |
| Plastics \x96 Ethylene/vinyl acetate copolymer (EVAC) thermoplastics \x96 Determination of vinyl acetate content | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) | |
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation | |
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values for plastics pipes and fittings and their joints | |
| Protective clothing \x96 Assessment of resistance of materials to molten metal splash | |
| Protective clothing against heat and flame \x96 Determination of heat transmission on exposure to flame (ISO 9151:2016) | |
| Qualification test of welders \x96 Fusion welding \x96 Part 2: Aluminium and aluminium alloys | |
| Qualification testing of welders \x96 Fusion welding \x96 Part 1: Steels | |
| Quality management \x96 Quality of an organization \x96 Guidance to achieve sustained success (ISO 9004:2018) | |
| Quality management and quality system elements - Part 1: Guidelines | |
| Quality management systems - Requirements | |
| Quality management systems \x96 Fundamentals and vocabulary (ISO 9000:2015) | |
| Quality management systems \x96 Requirements \x96 Amendment 1: Climate action changes (ISO 9001:2015/Amd 1:2024) | |
| Rapeseed \x96 Determination of glucosinolates content \x96 Part 1: Method using high-performance liquid chromatography | |
| Rapeseed and rapeseed meals \x96 Determination of glucosinolates content \x96 Method using high-performance liquid chromatography (ISO 9167:2019) | |
| Reaction to fire tests for floorings \x96 Part 1: Determination of the burning behaviour using a radiant heat source | |
| Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) | |
| Refractory materials \x96 Determination of bulk density of granular materials (grain density) (ISO 8840:2021) | |
| Requirements for the training of scientific divers \x96 Part 1: Scientific divers (ISO 8804-1:2024) | |
| Requirements for the training of scientific divers \x96 Part 2: Advanced scientific divers (ISO 8804-2:2024) | |
| Requirements for the training of scientific divers \x96 Part 3: Scientific diving project leader (ISO 8804-3:2024) | |
| Resistance spot welding \x96 Male electrode caps (ISO 5830:1984) | |
| Resistance welding equipment - Insulated pins for use in electrode back-ups | |
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 | |
| Sensory analysis - General guidance for the design of test rooms (ISO 8589:2007/Amd 1:2014) | |
| Sensory analysis - General guidance for the design of test rooms | |
| Sensory analysis \x96 General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors | |
| Shaped insulating refractory products - Determination of cold crushing strength | |
| Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations | |
| Ships and marine technology - Marine facsimile receivers for meteorological charts | |
| Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required | |
| Ships and marine technology \x96 Marine echo-sounding equipment | |
| Ships and marine technology \x96 Single rungs and rungs for dog-step ladders (ISO 9519:2023) | |
| Size designation of clothes \x96 Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017) | |
| Size designation of clothes \x96 Part 2: Primary and secondary dimension indicators (ISO 8559-2:2017) | |
| Small craft \x96 Electric fans | |
| Small craft \x96 Electrical devices \x96 Protection against ignition of surrounding flammable gases (ISO 8846:1990) | |
| Small craft \x96 Electrically operated direct-current bilge-pumps | |
| Small craft \x96 Fire protection (ISO 9094:2022) | |
| Small craft \x96 Marine propulsion reciprocating internal combustion engines \x96 Power measurements and declarations | |
| Small craft \x96 Power measurements and declarations \x96 Part 2: Electric marine propulsion (ISO 8665-2:2024) | |
| Small craft \x96 Principal data (ISO 8666:2020) | |
| Small craft \x96 Principal data | |
| Small craft \x96 Remote steering systems (ISO 8848:1990) | |
| Small craft \x96 Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) | |
| Small craft \x96 Seacocks and through-hull fittings (ISO 9093:2020) | |
| Small craft \x96 Seacocks and through-hull fittings \x96 Part 1: Metallic | |
| Small craft \x96 Seacocks and through-hull fittings \x96 Part 2: Non-metallic | |
| Small craft \x96 Steering gear \x96 Cable and pulley systems | |
| Soft solder alloys \x96 Chemical compositions and forms | |
| Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging | |
| Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements | |
| Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method | |
| Soft soldering fluxes - Test methods - Part 15: Copper corrosion test | |
| Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues | |
| Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method | |
| Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content | |
| Soft soldering fluxes - Tests methods - Part 3: Determination of acid value, potentiometric and visual titration methods | |
| Soft soldering fluxes \x96 Test methods \x96 Part 11: Solubility of flux residues (ISO 9455-11:2017) | |
| Soft soldering fluxes \x96 Test methods \x96 Part 13: Determination of flux spattering | |
| Soft soldering fluxes \x96 Test methods \x96 Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017) | |
| Soft soldering fluxes \x96 Test methods \x96 Part 16: Flux efficacy test, wetting balance method | |
| Soft soldering fluxes \x96 Test methods \x96 Part 5: Copper mirror test | |
| Soft soldering fluxes \x96 Test methods \x96 Part 6: Determination and detection of halide (excluding fluoride) content | |
| Solar energy \x96 Solar thermal collectors \x96 Test methods | |
| Solar energy \x96 Vocabulary | |
| Spices and condiments - Determination of extraneous matter and foreign matter content | |
| Spices and condiments - Sampling | |
| Spring-type straight pins - Coiled, heavy duty | |
| Spring-type straight pins - Coiled, light duty | |
| Spring-type straight pins - Coiled, standard duty | |
| Spring-type straight pins - Slotted, heavy duty | |
| Stainless steel needle tubing for manufacture of medical devices | |
| Stainless steel needle tubing for the manufacture of medical devices | |
| Steel \x96 Determination of aluminium content \x96 Flame atomic absorption spectrometric method (ISO 9658:2024) | |
| Steel \x96 Determination of vanadium content \x96 Flame atomic absorption spectrometric method (FAAS) (ISO 9647:2020) | |
| Steel and iron \x96 Determination of total carbon content \x96 Infrared absorption method after combustion in an induction furnace | |
| Sterile single-use syringes, with or without needle, for insulin | |
| Suction catheters for use in the respiratory tract | |
| Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter | |
| Surface active agents - Vocabulary - Trilingual version | |
| Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018) | |
| Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values | |
| Technical drawings - Rolling bearings - Part 1: General simplified representation | |
| Technical drawings - Rolling bearings - Part 2: Detailed simplified representation | |
| Technical drawings - Seals for dynamic application - Part 1: General simplified representation | |
| Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation | |
| Technical drawings \x96 Construction drawings \x96 Representation of modular sizes, lines and grids | |
| Technical specifications for centrifugal pump - Class III | |
| Technical specifications for centrifugal pumps - Class I - Amendment 1 | |
| Technical specifications for centrifugal pumps - Class I | |
| Technical specifications for centrifugal pumps - Class III - Amendment 1 | |
| Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems | |
| Terminal units for medical gas pipeline systems \x96 Part 1: Terminal units for use with compressed medical gases and vacuum | |
| Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings | |
| Textile machinery \x96 Noise test code \x96 Part 1: Common requirements \x96 Amendment 2 | |
| Textile machinery \x96 Noise test code \x96 Part 1: Common requirements | |
| Textile machinery \x96 Noise test code \x96 Part 2: Spinning preparatory and spinning machinery \x96 Amendment 2 | |
| Textile machinery \x96 Noise test code \x96 Part 2: Spinning preparatory and spinning machinery | |
| Textile machinery \x96 Noise test code \x96 Part 3: Nonwoven machinery \x96 Amendment 2 | |
| Textile machinery \x96 Noise test code \x96 Part 3: Nonwoven machinery | |
| Textile machinery \x96 Noise test code \x96 Part 4: Yarn processing, cordage and rope manufacturing machinery \x96 Amendment 2 | |
| Textile machinery \x96 Noise test code \x96 Part 4: Yarn processing, cordage and rope manufacturing machinery | |
| Textile machinery \x96 Noise test code \x96 Part 5: Weaving and knitting preparatory machinery | |
| Textile machinery \x96 Noise test code \x96 Part 6: Fabric manufacturing machinery | |
| Textile machinery \x96 Noise test code \x96 Part 7: Dyeing and finishing machinery | |
| Textiles - Determination of permeability of fabrics to air | |
| Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state | |
| Textiles - Test methods for nonwovens - Part 11: Run-off | |
| Textiles - Test methods for nonwovens - Part 12: Demand absorbency | |
| Textiles - Test methods for nonwovens - Part 15: Determination of air permeability | |
| Textiles - Test methods for nonwovens - Part 16: Determination of resistance to penetration by water (hydrostatic pressure) | |
| Textiles - Test methods for nonwovens - Part 17: Determination of water penetration (spray impact) | |
| Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test | |
| Textiles - Test methods for nonwovens - Part 2: Determination of thickness | |
| Textiles - Test methods for nonwovens - Part 9: Determination of drapability including drape coefficient | |
| Textiles \x96 Nonwovens \x96 Definition | |
| Textiles \x96 Test methods for nonwovens \x96 Part 13: Repeated liquid strike-through time | |
| Textiles \x96 Test methods for nonwovens \x96 Part 14: Coverstock wetback | |
| Textiles \x96 Test methods for nonwovens \x96 Part 4: Determination of tear resistance | |
| Textiles \x96 Test methods for nonwovens \x96 Part 5: Determination of resistance to mechanical penetration (ball burst procedure) | |
| Textiles \x96 Test methods for nonwovens \x96 Part 6: Absorption | |
| Textiles \x96 Test methods for nonwovens \x96 Part 7: Determination of bending length | |
| Textiles \x96 Test methods for nonwovens \x96 Part 8: Determination of liquid strike-through time (simulated urine) | |
| Thermal cutting \x96 Classification of thermal cuts \x96 Geometrical product specification and quality tolerances | |
| Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box | |
| Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary | |
| Thermal insulation - Vocabulary | |
| Thermal insulation \x96 Heat transfer by radiation \x96 Physical quantities and definitions | |
| Thermal performance of buildings \x96 Determination of air permeability of buildings \x96 Fan pressurization method | |
| Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) | |
| Thermoplastics pipes - Determination of ring stiffness | |
| Thermoplastics valves \x96 Fatigue strength \x96 Test method | |
| Timber structures \x96 Testing of joints made with mechanical fasteners \x96 Requirements for wood density | |
| Uranium dioxide powder \x96 Determination of apparent density and tap density (ISO 9161:2019) | |
| Urine collection bags - Part 2: Requirements and test methods | |
| Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates | |
| Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates | |
| Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method | |
| Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (Most Probable Number) by inoculation in liquid medium... | |
| Water quality - Determination of adsorbable organically bound halogens (AOX) | |
| Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity | |
| Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity | |
| Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography | |
| Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora | |
| Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2: Most probable number method | |
| Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) | |
| Water quality - Evaluation of the ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method) | |
| Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test | |
| Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer | |
| Water quality - Fresh water algal growth inhibition test with unicellular green algae | |
| Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms | |
| Water quality \x96 Determination of tritium activity concentration \x96 Liquid scintillation counting method | |
| Water quality \x96 Gross alpha activity \x96 Test method using thick source (ISO 9696:2017) | |
| Water quality \x96 Gross beta activity \x96 Test method using thick source (ISO 9697:2018) | |
| Welding and allied processes - Recommendation for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels | |
| Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels | |
| Welding and allied processes \x96 Joint preparation \x96 Part 2: Submerged arc welding of steels (ISO 9692-2:2024) | |
| Welding and allied processes \x96 Joint preparation \x96 Part 2: Submerged arc welding of steels | |
| Welding and allied processes \x96 Types of joint preparation \x96 Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016) |
| << Prev | Next >> |