Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
620
630
640
650
660
670
674
675
676
677
678
679
680
681
682
683
684
685
686
690
700
710
720
730
740
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation | |
| Acoustics - Guidelines for noise control by silencers | |
| Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance | |
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field | |
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements | |
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms | |
| Adaptation to climate change \x96 Guidelines on vulnerability, impacts and risk assessment (ISO 14091:2021) | |
| Adaptation to climate change \x96 Principles, requirements and guidelines (ISO 14090:2019) | |
| Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method | |
| Air quality - Sampling conventions for airborne particle deposition in the human respiratory system | |
| Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry | |
| Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters (ISO 12966-1:2014) | |
| Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 4: Determination by capillary gas chromatography (ISO 12966-4:2015) | |
| Animal and vegetable fats and oils \x96 Gas chromatography of fatty acid methyl esters \x96 Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters (ISO 12966-1:2014) | |
| Animal and vegetable fats and oils \x96 Gas chromatography of fatty acid methyl esters \x96 Part 2: Preparation of methyl esters of fatty acids | |
| Animal and vegetable fats and oils \x96 Gas chromatography of fatty acid methyl esters \x96 Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) | |
| Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents | |
| Animal feeding stuffs - Determination of amino acids content | |
| Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization | |
| Animal feeding stuffs - Determination of residues of organochloride pesticide residues - Gas chromatographic method | |
| Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method | |
| Animal feeding stuffs - Determination of tryptophan content | |
| Aseptic processing of health care products - Part 1: General requirements | |
| Aseptic processing of health care products - Part 3: Lyophilization | |
| Aseptic processing of health care products - Part 4: Clean-in-place technologies | |
| Aseptic processing of health care products - Part 5: Sterilization in place | |
| Aseptic processing of health care products - Part 7: Alternative processes for medical devices and combination products (ISO 13408-7:2012) | |
| Aseptic processing of health care products \x96 Part 1: General requirements (ISO 13408-1:2023) | |
| Aseptic processing of health care products \x96 Part 2: Filtration | |
| Aseptic processing of health care products \x96 Part 6: Isolator systems | |
| Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement | |
| Brazing \x96 Qualification testing of brazers and brazing operators (ISO 13585:2021) | |
| Carbon fibre - Designation system for filament yarns | |
| Cathodic protection of harbour installations | |
| Centrifugal pumps for petroleum, petrochemical and natural gas industries | |
| Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth | |
| Characterization of pavement texture by use of surface profiles \x96 Part 5: Determination of megatexture | |
| Clinical investigation of medical devices for human subjects - Good clinical practice | |
| Clinical investigation of medical devices for human subjects - Part 1: General requirements | |
| Clinical investigation of medical devices for human subjects - Part 2: Clinical investigation plans | |
| Clinical investigation of medical devices for human subjects \x96 Good clinical practice (ISO 14155:2020) | |
| Concentrates for haemodialysis and related therapies | |
| Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple | |
| Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment | |
| Dentistry - Mandrels for rotary instruments | |
| Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type - Amendment 1: Colour coding | |
| Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type | |
| Dentistry - Periodontal curettes, dental scalers and excavators - Part 5: Jacquette scalers | |
| Dentistry - Polymer-based die materials | |
| Dentistry - Test Method for Determining Radio-Opacity of Materials | |
| Dentistry \x96 Amalgam capsules | |
| Dentistry \x96 Dental furnace \x96 Part 2: Test method for evaluation of furnace programme via firing glaze (ISO 13078-2:2016) | |
| Dentistry \x96 Dental furnace \x96 Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023) | |
| Dentistry \x96 Magnetic attachments \x96 Amendment 1 | |
| Dentistry \x96 Magnetic attachments | |
| Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2023) | |
| Determination of flash point \x96 Abel closed-cup method \x96 Amendment 1: Bias statement update (ISO 13736:2021/Amd 1:2022) | |
| Determination of flash point \x96 Abel closed-cup method | |
| Earth-moving and building construction machinery \x96 Electromagnetic compatibility (EMC) of machines with internal electrical power supply \x96 Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018) | |
| Earth-moving and building construction machinery \x96 Electromagnetic compatibility (EMC) of machines with internal electrical power supply \x96 Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 \x96 Part 2: Abstract test suite (ISO 13140-2:2016) | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to EN ISO/TS 12813 \x96 Part 2: Abstract test suite (ISO 13143-2:2016) | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to ISO 12813 (ISO 13143:2025) | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to ISO 12813 \x96 Part 1: Test suite structure and test purposes (ISO 13143-1:2016) | |
| Electronic fee collection \x96 Evaluation of on-board and roadside equipment for conformity to ISO 13141 \x96 Part 1: Test suite structure and test purposes (ISO 13140-1:2016) | |
| Electronic fee collection \x96 Localisation augmentation communication for autonomous systems \x96 Amendment 1 (ISO 13141:2015/Amd 1:2017) | |
| Electronic fee collection \x96 Localization augmentation communication for autonomous systems (ISO 13141:2024) | |
| Energy performance of buildings \x96 Calculation of energy use for space heating and cooling | |
| Environmental labels and declarations - Type III environmental declarations - Principles and procedures | |
| Environmental labels and declarations \x96 General principles | |
| Environmental labels and declarations \x96 Principles, requirements and guidelines for communication of footprint information (ISO 14026:2017) | |
| Environmental labels and declarations \x96 Self-declared environmental claims (Type II environmental labelling) \x96 Amendment 1 | |
| Environmental labels and declarations \x96 Self-declared environmental claims (Type II environmental labelling) | |
| Environmental labels and declarations \x96 Type I environmental labelling \x96 Principles and procedures | |
| Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines | |
| Environmental management - Material flow cost accounting - General framework | |
| Environmental management \x96 Environmental assessment of sites and organizations (EASO) | |
| Environmental management \x96 Environmental communication \x96 Guidelines and examples | |
| Environmental management \x96 Environmental performance evaluation \x96 Guidelines | |
| Environmental management \x96 Environmental technology verification (ETV) (ISO 14034:2016) | |
| Environmental management \x96 Guidelines for determining environmental costs and benefits (ISO 14007:2019) | |
| Environmental management \x96 Life cycle assessment \x96 Principles and framework \x96 Amendment 1 (ISO 14040:2006/Amd 1:2020) | |
| Environmental management \x96 Life cycle assessment \x96 Principles and framework | |
| Environmental management \x96 Life cycle assessment \x96 Requirements and guidelines \x96 Amendment 1 (ISO 14044:2006/Amd 1:2018) | |
| Environmental management \x96 Life cycle assessment \x96 Requirements and guidelines \x96 Amendment 2 (ISO 14044:2006/Amd 2:2020) | |
| Environmental management \x96 Life cycle assessment \x96 Requirements and guidelines | |
| Environmental management \x96 Material flow cost accounting \x96 Guidance for practical implementation in a supply chain (ISO 14052:2017) | |
| Environmental management \x96 Vocabulary | |
| Environmental management \x96 Water footprint \x96 Principles, requirements and guidelines | |
| Environmental management systems - Guidelines for incorporating ecodesign | |
| Environmental management systems - Requirements with guidance for use | |
| Environmental management systems \x96 General guidelines on implementation | |
| Environmental management systems \x96 Guidelines for a flexible approach to phased implementation (ISO 14005:2019) | |
| Environmental management systems \x96 Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area \x96 Part 1: General (ISO 14002-1:2019) | |
| Environmental management systems \x96 Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area \x96 Part 2: Water (ISO 14002-2:2023) | |
| Environmental management systems \x96 Requirements with guidance for use \x96 Amendment 1: Climate action changes (ISO 14001:2015/Amd 1:2024) | |
| Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays | |
| Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments | |
| Ergonomics of the thermal environment - Vocabulary and symbols | |
| Ergonomics of the thermal environment \x96 Methods for the assessment of human responses to contact with surfaces \x96 Part 1: Hot surfaces | |
| Ergonomics of the thermal environment \x96 Methods for the assessment of human responses to contact with surfaces \x96 Part 3: Cold surfaces | |
| Fans - Vocabulary and definitions of categories | |
| Fans \x96 Performance testing of jet fans | |
| Fans \x96 Vocabulary and definitions of categories \x96 Part 1: Vocabulary (ISO 13349-1:2022) | |
| Fans \x96 Vocabulary and definitions of categories \x96 Part 2: Categories (ISO 13349-2:2022) | |
| Fasteners \x96 Parallel grooved pins \x96 Half-length diamond grooves (ISO 13672:2025) | |
| Fibre ropes \x96 Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) \x96 3-, 4-, 8- and 12-strand ropes | |
| Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method | |
| Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999) | |
| Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:200 1) | |
| Fibre-reinforced plastic composites - Determination of flexural properties | |
| Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45\xba tension test method | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Microstructural characterization \x96 Part 1: Determination of grain size and size distribution (ISO 13383-1:2012) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Microstructural characterization \x96 Part 2: Determination of phase volume fraction by evaluation of micrographs (ISO 13383-2:2012) | |
| Fire safety \x96 Vocabulary | |
| Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection | |
| Gas cylinders - Cylinder valves - Manufacturing tests and examinations | |
| Gas cylinders - Fitting of valves to gas cylinders | |
| Gas cylinders \x96 Acetylene cylinder bundles \x96 Filling conditions and filling inspection \x96 Amendment 1 (ISO 13088:2011/Amd 1: 2020) | |
| Gas cylinders \x96 Fitting of valves to gas cylinders | |
| Gas cylinders \x96 Gases and gas mixtures \x96 Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Self-closing | |
| Gas cylinders \x96 Stamp marking | |
| Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | |
| Gas welding equipment \x96 Acetylene manifold systems for welding, cutting and allied processes \x96 General requirements | |
| Gel permeation chromatography (GPC) \x96 Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020) | |
| Gel permeation chromatography (GPC) \x96 Part 2: N,N-Dimenthylacetami de (DMAC) as eluent (ISO 13885-2:2020) | |
| Gel permeation chromatography (GPC) \x96 Part 3: Water as eluent (ISO 13885-3:2020) | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics | |
| Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment... | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) | |
| Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 1: Callipers; Design and metrological characteristics | |
| Geometrical Product Specifications (GPS) \x96 Indication of surface texture in technical product documentation | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile method; surfaces having stratified functional properties \x96 Part 2: Height characterization using the linear material ratio curve | |
| Geometrical Product Specifications (GPS) \x96 Surface texture: Profile method; Surfaces having stratified functional properties \x96 Part 3: Height characterization using the material propability curve | |
| Geosynthetics - Abrasion damage simulation (sliding block test) | |
| Geosynthetics - Dynamic perforation test (cone drop test) | |
| Geosynthetics \x96 Determination of friction characteristics \x96 Part 1: Direct shear test | |
| Geosynthetics \x96 Determination of friction characteristics \x96 Part 2: Inclined plane test (ISO 12957-2:2024) | |
| Geosynthetics \x96 Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2024) | |
| Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour | |
| Geotextiles and geotextile-related products - Determination of the characteristic opening size | |
| Geotextiles and geotextile-related products - Determination of water flow capacity in their plane | |
| Geotextiles and geotextile-related products \x96 Determination of water flow capacity in their plane \x96 Part 1: Index test (ISO 12958-1:2020) | |
| Geotextiles and geotextile-related products \x96 Determination of water flow capacity in their plane \x96 Part 2: Performance test (ISO 12958-2:2020) | |
| Geotextiles and geotextile-related products \x96 Method for installing and extracting samples in soil, and testing specimens in laboratory | |
| Geotextiles and geotextile-related products \x96 Screening test method for determining the resistance to oxidation | |
| Geotextiles and geotextile-related products \x96 Screening test methods for determining the resistance to acid and alkaline liquids (ISO 12960:2020) | |
| Geotextiles and geotextile-related products \x96 Strength of internal structural junctions \x96 Part 1: Geocells | |
| Geotextiles and geotextile-related products \x96 Strength of internal structural junctions \x96 Part 2: Geocomposites (ISO 13426-2:2024) | |
| Greenhouse gases \x96 Carbon footprint of products \x96 Requirements and guidelines for quantification (ISO 14067:2018) | |
| Greenhouse gases \x96 Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Greenhouse gases \x96 Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements | |
| Greenhouse gases \x96 Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions | |
| Greenhouse gases \x96 Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO 14083:2023) | |
| Greenhouse gases \x96 Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition | |
| Health informatics - Service architecture - Part 1: Enterprise viewpoint (ISO 12967-1:2009) | |
| Health informatics - Service architecture - Part 2: Information viewpoint | |
| Health informatics - Service architecture - Part 3: Computational viewpoint | |
| Health informatics - System of concepts to support continuity of care | |
| Health informatics \x96 Clinical information models \x96 Characteristics, structures and requirements (ISO 13972:2022) | |
| Health informatics \x96 Clinical knowledge resources \x96 Metadata | |
| Health informatics \x96 Electronic health record communication \x96 Part 1: Reference model | |
| Health informatics \x96 Electronic health record communication \x96 Part 2: Archetype interchange specification (ISO 13606-2:2019) | |
| Health informatics \x96 Electronic health record communication \x96 Part 3: Reference archetypes and term lists (ISO 13606-3:2019) | |
| Health informatics \x96 Electronic health record communication \x96 Part 4: Security (ISO 13606-4:2019) | |
| Health informatics \x96 Electronic health record communication \x96 Part 5: Interface specification | |
| Health informatics \x96 Syntax to represent the content of healthcare classification systems \x96 Classification Markup Language (ClaML) | |
| Health informatics \x96 Telehealth services \x96 Quality planning guidelines (ISO 13131:2021) | |
| High-pressure decorative laminates - Composite elements - Part 1: Test methods | |
| High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use | |
| Human-centred design processes for interactive systems | |
| Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods | |
| Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) | |
| Industrial fans - Dimensions | |
| Industrial furnaces and associated processing equipment \x96 Safety \x96 Part 2: Combustion and fuel handling systems (ISO 13577-2:2023) | |
| Industrial furnaces and associated processing equipment \x96 Safety \x96 Part 4: Protective systems (ISO 13577-4:2022) | |
| Irrigation equipment \x96 Safety devices for chemigation \x96 Part 1: Small plastics valves for chemigation (ISO 13693-1:2013) | |
| Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method | |
| Laboratory glassware - Desiccators | |
| Laboratory glassware \x96 Petri dishes | |
| Leather \x96 Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography \x96 Part 1: Acetonitrile extraction method (ISO 13365-1:2020) | |
| Leather \x96 Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography \x96 Part 2: Artificial perspiration extraction method (ISO 13365-2:2020) | |
| Leather \x96 Chemical tests \x96 Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography | |
| Leather \x96 Chemical tests \x96 Quantitative analysis of tanning agents by filter method | |
| Leather \x96 Physical and mechanical tests \x96 Determination of bending force | |
| Leather \x96 Physical and mechanical tests \x96 Determination of water vapour permeability (ISO 14268:2023) | |
| Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method | |
| Liquefied petroleum gases - Determination of oily residues - High-temperature method | |
| Liquefied petroleum gases \x96 Assessment of the dryness of propane \x96 Valve freeze method \x96 Amendment 1 (ISO 13758:1996/Amd 1:2020) | |
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU | |
| Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method | |
| Meat and meat products - Enumeration of presumptive Pseudomonas spp. | |
| Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints | |
| Mechanical vibration and shock - Guidance of safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock | |
| Mechanical vibration and shock \x96 Hand-arm vibration \x96 Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system | |
| Mechanism for financing local adaptation to climate change \x96 Performance-based climate resilience grants \x96 Requirements and guidelines (ISO 14093:2022) | |
| Medical devices - Quality management systems - Requirements for regulatory purposes | |
| Medical devices - Quality management systems - System requirements for regulatory purposes | |
| Medical devices \x96 Quality management systems \x96 Requirements for regulatory purposes (ISO 13485:2016) | |
| Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient | |
| Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) | |
| Metallic powders \x96 Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2024) | |
| Microbiology of food and animal feed - Primary production stage - Sampling techniques | |
| Milk - Enumeration of somatic cells - Part 1: Microscopic method (Reference method) | |
| Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electron ic counters | |
| Milk and milk products - Guidelines for a standardized description of microbial inhibitor tests | |
| Monetary valuation of environmental impacts and related environmental aspects (ISO 14008:2019) | |
| Natural gas - Guidelines to traceability in analysis | |
| Natural gas - Organic components used as odorants - Requirements and test methods | |
| Natural gas - Quality designation | |
| Natural gas - Standard reference conditions | |
| Non-destructive testing \x96 Qualification of radiographic film digitisation systems \x96 Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005) | |
| Non-destructive testing \x96 Qualification of radiographic film digitisation systems \x96 Part 2: Minimum requirements (ISO 14096-2:2005) | |
| Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology | |
| Oil and gas industries \x96 Control and mitigation of fires and explosions on offshore production installations \x96 Requirements and guidelines (ISO 13702:2024) | |
| Oil and gas industries including lower carbon energy \x96 Piping systems on offshore platforms and onshore plants \x96 Part 2: Materials (ISO 13703-2:2023) | |
| Oilseed meals \x96 Determination of soluble proteins in potassium hydroxide solution (ISO 14244:2014) | |
| Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography | |
| Olive oils and olive-pomace oils \x96 Determination of the 2-glyceryl monopalmitate content | |
| Ophthalmic instruments - Perimeters | |
| Ophthalmic instruments - Retinoscopes | |
| Ophthalmic instruments - Trial frames | |
| Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life | |
| Ophthalmic optics - Spectacle lenses - Vocabulary | |
| Ophthalmic optics \x96 Spectacle frames \x96 Requirements and test methods | |
| Optics and optical instruments \x96 Test methods for radiation scattered by optical components | |
| Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components | |
| Optics and photonics \x96 Lasers and laser-related equipment \x96 Test methods for laser beam power (energy) density distribution | |
| Optics and photonics \x96 Lasers and laser-related equipment \x96 Test methods for the spectral characteristics of lasers | |
| Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems | |
| Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs | |
| Packaging \x96 Complete, filled transport packages and unit loads \x96 Vertical random vibration test (ISO 13355:2016) | |
| Paints and varnishes - Determination of haze on paint films at 20 degrees | |
| Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 1: General introduction | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 2: Classification of environments | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 3: Design considerations | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 4: Types of surface and surface preparation | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 5: Protective paint systems | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 6: Laboratory performance test methods | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 7: Execution and supervision of paint work | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 8: Development of specifications for new work and maintenance | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems \x96 Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO... | |
| Paints and varnishes \x96 Lighting and procedure for visual assessments of coatings | |
| Periodontal curettes, dental scalers and excavators - Part 1: General requirements | |
| Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers, H-type | |
| Periodontal curettes, dental scalers and excavators \x96 Part 4: Dental excavators \x96 Discoid-type | |
| Personal protective equipment - Footwear - Test method for slip resistance | |
| Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells | |
| Petroleum and natural gas industries - Completion fluides and materials - Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants | |
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions | |
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems | |
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment | |
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures | |
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment | |
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment | |
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment | |
| Petroleum and natural gas industries - Drilling and production equipment - Shallow gas diverter equipment | |
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1 | |
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests | |
| Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation | |
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements | |
| Petroleum and natural gas industries - High-speed special-purpose gear units | |
| Petroleum and natural gas industries - Packaged reciprocating gas compressors | |
| Petroleum and natural gas industries \x96 Completion fluids and materials \x96 Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations \x96 Amendment 1: Addition of... | |
| Petroleum and natural gas industries \x96 Completion fluids and materials \x96 Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | |
| Petroleum and natural gas industries \x96 Completion fluids and materials \x96 Part 3: Testing of heavy brines | |
| Petroleum and natural gas industries \x96 Design and operation of subsea production systems \x96 Part 1: General requirements and recommendations \x96 Amendment 1: Revised Clause 6 | |
| Petroleum and natural gas industries \x96 Design and operation of subsea production systems \x96 Part 1: General requirements and recommendations | |
| Petroleum and natural gas industries \x96 Procedures for testing casing and tubing connections | |
| Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method | |
| Petroleum products \x96 Determination of low concentration of sulfur in automotive fuels \x96 Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2024) | |
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers | |
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service | |
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps | |
| Petroleum, petrochemical and natural gas industries \x96 Calculation of heater-tube thickness in petroleum refineries | |
| Petroleum, petrochemical and natural gas industries \x96 Collection and exchange of reliability and maintenance data for equipment | |
| Plastics - Simple heat release test using a conical radiant heater and a thermopile detector | |
| Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing | |
| Plastics \x96 Determination of the total luminous transmittance of transparent materials \x96 Part 2: Double-beam instrument | |
| Plastics \x96 Determination of total luminous transmittance of transparent materials \x96 Part 1: Single-beam instrument | |
| Plastics \x96 Polytetrafluoroethyl ene (PTFE) semi-finished products \x96 Part 1: Requirements and designation | |
| Plastics \x96 Polytetrafluoroethyl ene (PTFE) semi-finished products \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage | |
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility | |
| Plastics piping systems - Elastomeric-sealing- ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection | |
| Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure | |
| Plastics piping systems - Unplasticized poly(vinyl chlorid) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure | |
| Plastics piping systems \x96 Elastomeric-sealing- ring-type socket joints for use with plastic pressure pipes \x96 Test method for leaktightness under negative pressure, angular deflection and deformation | |
| Plastics piping systems \x96 Pressure systems for hot and cold water \x96 Test method for leaktightness under vacuum (ISO 13056:2011) | |
| Polyolefin pipes for the conveyance of fluids \x96 Determination of resistance to crack propagation \x96 Test method for slow crack growth on notched pipes | |
| Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) | |
| Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing | |
| Protective clothing \x96 Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) | |
| Protective clothing \x96 General requirements \x96 Amendment 1 (ISO 13688:2013/Amd 1:2021) | |
| Protective clothing \x96 General requirements | |
| Protective clothing \x96 Mechanical properties \x96 Determination of resistance to cutting by sharp objects (ISO 13997:1999) | |
| Protective clothing against heat and flame \x96 Part 1: Test method for complete garments \x96 Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2024) | |
| Protective clothing against heat and flame \x96 Part 2: Skin burn injury prediction \x96 Calculation requirements and test cases (ISO 13506-2:2024) | |
| Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits | |
| Protective clothing for use against solid particulates \x96 Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) | |
| Radiological protection \x96 Criteria and performance limits for the periodic evaluation of dosimetry services for external radiation (ISO 14146:2024) | |
| Radiological protection \x96 Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation \x96 Part 1: General principles (ISO 13304-1:2020) | |
| Radiological protection \x96 Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation \x96 Part 2: Ex vivo human tooth enamel dosimetry (ISO 13304-2:2020) | |
| Recreational diving services - Requirements for gas blender training programmes | |
| Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016) | |
| Resistance welding \x96 Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds | |
| Robots and robotic devices \x96 Safety requirements for personal care robots | |
| Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses | |
| Rubber and plastics hoses and hose assemblies \x96 Hydrostatic testing | |
| Rubber hoses for agricultural spraying (ISO 1401:2016) | |
| Rubber hoses, textile-reinforced, for general-purpose water applications \x96 Specification | |
| Rubber- or plastics-coated fabrics \x96 Determination of tensile strength and elongation at break (ISO 1421:2016) | |
| Safety of machinery - Emergency stop - Principles for design | |
| Safety of machinery - Risk assessment - Part 1: Principles | |
| Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design | |
| Safety of machinery - Safety-related parts of control systems - Part 2: Validation | |
| Safety of machinery \x96 Guards \x96 General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) | |
| Safety of machinery \x96 Hygiene requirements for the design of machinery | |
| Safety of machinery \x96 Interlocking devices associated with guards \x96 Principles for design and selection (ISO 14119:2024) | |
| Safety of machinery \x96 Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017) | |
| Safety of machinery \x96 Permanent means of access to machinery \x96 Part 1: Choice of fixed means of access between two levels | |
| Safety of machinery \x96 Permanent means of access to machinery \x96 Part 2: Working platforms and walkways | |
| Safety of machinery \x96 Permanent means of access to machinery \x96 Part 3: Stairs, stepladders and guard-rails | |
| Safety of machinery \x96 Permanent means of access to machinery \x96 Part 4: Fixed ladders | |
| Safety of machinery \x96 Positioning of safeguards with respect to the approach of the human body (ISO 13855:2024) | |
| Safety of machinery \x96 Pressure-sensitive protective devices \x96 Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors | |
| Safety of machinery \x96 Pressure-sensitive protective devices \x96 Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars | |
| Safety of machinery \x96 Pressure-sensitive protective devices \x96 Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices | |
| Safety of machinery \x96 Prevention of unexpected start-up (ISO 14118:2017) | |
| Safety of machinery \x96 Reduction of risks to health resulting from hazardous substances emitted by machinery \x96 Part 1: Principles and specifications for machinery manufacturers | |
| Safety of machinery \x96 Reduction of risks to health resulting from hazardous substances emitted by machinery \x96 Part 2: Methodology leading to verification procedures | |
| Safety of machinery \x96 Safety distances to prevent hazard zones being reached by upper and lower limbs | |
| Safety of machinery \x96 Safety-related parts of control systems \x96 Part 1: General principles for design (ISO 13849-1:2023) | |
| Safety of machinery \x96 Two-hand control devices \x96 Principles for design and selection (ISO 13851:2019) | |
| Sensory analysis - Methodology - General guidance for establishing a sensory profile | |
| Small craft \x96 Electrical systems \x96 Alternating and direct current installations (ISO 13297:2020) | |
| Small craft \x96 Electrical systems \x96 Alternating and direct current installations \x96 Amendment 1 (ISO 13297:2020/Amd 1:2022) | |
| Small craft \x96 Electrical systems \x96 Alternating current installations | |
| Small craft \x96 Personal watercraft \x96 Construction and system installation requirements | |
| Small craft \x96 Steering gear \x96 Geared link systems | |
| Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes | |
| Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method | |
| Soil quality - Determination of soil microbial biomass - Part 2: Fumigation-extractio n method | |
| Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument | |
| Soil quality \x96 Determination of exchangeable acidity in barium chloride extracts | |
| Soil quality \x96 Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions (ISO 14239:2017) | |
| Spring-type straight pins - Slotted, light duty | |
| Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010/Amd 1:2016) | |
| Standard test method for assessing the ignition propensity of cigarettes | |
| Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination | |
| Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter | |
| Steel - Determination of boron content - Curcumin spectrophotometric method after distillation | |
| Sterilization of health care products \x96 Biological indicators \x96 Guidance for the selection, use and interpretation of results | |
| Sterilization of health care products \x96 Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives \x96 Requirements for characterization, development, validation and routine control of... | |
| Sterilization of health care products \x96 Radiation \x96 Substantiation of selected sterilization dose: Method VDmaxSD (ISO 13004:2022) | |
| Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure | |
| Technical product documentation (TPD) \x96 Presentation of dimensions and tolerances \x96 Part 1: General principles (ISO 129-1:2018) | |
| Technical product documentation (TPD) \x96 Presentation of dimensions and tolerances \x96 Part 1: General principles \x96 Amendment 1 (ISO 129-1:2018/Amd 1:2020) | |
| Technical product documentation \x96 Edges of undefined shape \x96 Indication and dimensioning (ISO 13715:2017) | |
| Technical product documentation \x96 Organization and naming of layers for CAD \x96 Part 1: Overview and principles | |
| Technical product documentation \x96 Organization and naming of layers for CAD \x96 Part 2: Concepts, format and codes used in construction documentation | |
| Textile floor coverings - Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine | |
| Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette | |
| Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent | |
| Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus | |
| Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method | |
| Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method | |
| Textiles - Determination of formaldehyde - Part 1: Free and hydrolised formaldehyde (water extraction method) | |
| Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) | |
| Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss | |
| Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change | |
| Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method | |
| Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method | |
| Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method | |
| Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method | |
| Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method | |
| Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method | |
| Textiles - Standard atmospheres for conditioning and testing | |
| Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) | |
| Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) | |
| Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing shaped test specimens (Single tear method) | |
| Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) | |
| Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method | |
| Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method | |
| Textiles \x96 Bursting properties of fabrics \x96 Part 1: Hydraulic method for determination of bursting strength and bursting distension | |
| Textiles \x96 Bursting properties of fabrics \x96 Part 2: Pneumatic method for determination of bursting strength and bursting distension | |
| Textiles \x96 Determination of fabric propensity to surface pilling, fuzzing or matting \x96 Part 4: Assessment of pilling, fuzzing or matting by visual analysis (ISO 12945-4:2020) | |
| Textiles \x96 Determination of formaldehyde \x96 Part 3: Free and hydrolysed formaldehyde (extraction method) by liquid chromatography (ISO 14184-3:2023) | |
| Textiles \x96 Determination of the abrasion resistance of fabrics by the Martindale method \x96 Part 2: Determination of specimen breakdown | |
| Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity | |
| Thermal performance of building components \x96 Dynamic thermal characteristics \x96 Calculation methods | |
| Thermal performance of buildings - Thermal design of foundations to avoid frost heave | |
| Thermal performance of buildings \x96 Calculation of internal temperatures of a room in summer without mechanical cooling \x96 General criteria and validation procedures | |
| Thermal performance of buildings \x96 Calculation of internal temperatures of a room in summer without mechanical cooling \x96 Simplified methods | |
| Thermal performance of buildings \x96 Heat transfer via the ground \x96 Calculation methods | |
| Thermal performance of buildings \x96 Transmission and ventilation heat transfer coefficients \x96 Calculation method | |
| Thermal spraying \x96 Powders \x96 Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) | |
| Thermoplastics fittings - Determination of ring stiffness | |
| Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) | |
| Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) | |
| Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value | |
| Thermoplastics piping systems for non-pressure applications \x96 Test method for resistance to elevated temperature cycling (ISO 13257:2018) | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage \x96 Test method for resistance to combined temperature cycling and external loading \x96 Amendment 1 (ISO 13260:2011/Amd 1:2017) | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage \x96 Thermoplastics inspection chamber and manhole bases \x96 Test methods for buckling resistance (ISO 13267:2022) | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage \x96 Thermoplastics shafts or risers for inspection chambers and manholes \x96 Determination of resistance against surface and traffic loading (ISO 13266:2022)... | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage \x96 Thermoplastics shafts or risers for inspection chambers and manholes \x96 Determination of ring stiffness (ISO 13268:2022) | |
| Thermoplastics piping systems for underground non-pressure applications \x96 Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2018) | |
| Vitreous and porcelain enamels \x96 Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry | |
| Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) | |
| Water for haemodialysis and related therapies | |
| Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection | |
| Water quality \x96 Determination of carbon 14 activity \x96 Liquid scintillation counting method (ISO 13162:2011) | |
| Water quality \x96 Enumeration of Clostridium perfringens \x96 Method using membrane filtration (ISO 14189:2013) | |
| Water quality \x96 Lead-210 \x96 Test method using liquid scintillation counting (ISO 13163:2013) | |
| Water quality \x96 Measurement of polonium 210 activity concentration in water by alpha spectrometry | |
| Water quality \x96 Radium-226 \x96 Part 1: Test method using liquid scintillation counting (ISO 13165-1:2022) | |
| Water quality \x96 Radium-226 \x96 Part 2: Test method using emanometry (ISO 13165-2:2014) | |
| Water quality \x96 Radium-226 \x96 Part 3: Test method using coprecipitation and gamma-spectrometry (ISO 13165-3:2016) | |
| Water quality \x96 Radon-222 \x96 Part 1: General principles (ISO 13164-1:2013) | |
| Water quality \x96 Radon-222 \x96 Part 2: Test method using gamma-ray spectrometry (ISO 13164-2:2013) | |
| Water quality \x96 Radon-222 \x96 Part 3: Test method using emanometry (ISO 13164-3:2013) | |
| Water quality \x96 Radon-222 \x96 Part 4: Test method using two-phase liquid scintillation counting (ISO 13164-4:2015) | |
| Water quality \x96 Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) | |
| Water quality \x96 Strontium 90 and strontium 89 \x96 Test methods using liquid scintillation counting or proportional counting | |
| Welding - Laser-arc hybrid welding of steels, nickel and nickel alloys - Quality levels for imperfections | |
| Welding \x96 Electron and laser beam welded joints \x96 Guidance on quality levels for imperfections \x96 Part 2: Aluminium and its weldable alloys | |
| Welding \x96 Electrons and laser beam welded joints \x96 Guidance on quality levels for imperfections \x96 Part 1: Steel | |
| Welding \x96 General tolerances for welded constructions \x96 Dimensions for lengths and angles \x96 Shape and position | |
| Welding \x96 Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature | |
| Welding \x96 Studs and ceramic ferrules for arc stud welding \x96 Amendment 1 (ISO 13918:2017/Amd 1:2021) | |
| Welding \x96 Studs and ceramic ferrules for arc stud welding | |
| Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification | |
| Welding consumables - Gases and gas mixtures for fusion welding and allied processes | |
| Welding consumables \x96 Fluxes for submerged arc welding and electroslag welding \x96 Classification | |
| Welding consumables \x96 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels \x96 Classification | |
| Wool - Determination of fibre diameter - Projection microscope method | |
| Workplace atmospheres \x96 Pumps for personal sampling of chemical and biological agents \x96 Requirements and test methods | |
| Woven fabrics - Distortion - Determination of skew and bow |
| << Prev | Next >> |