Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
290
300
310
320
330
340
344
345
346
347
348
349
350
351
352
353
354
355
356
360
370
380
390
400
410
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Aerospace series - Test methods for metallic materials - Determination of density according to displacement method | |
| Alternating Current Disconnectors and Earthing Switches | |
| Aluminium and Aluminium Alloys - Castings - Chemical Composition of Castings for Use in Contact with Food | |
| Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products | |
| Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 1: Numerical Designation System | |
| Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 2: Chemical Symbol Based Designation System | |
| Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 3: Chemical composition and form of products | |
| Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 3: Chemical Composition | |
| Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 4: Forms of Products | |
| Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form | |
| Aluminium and Aluminium Alloys - Forgings Part 1: Technical Conditions for Inspection and Delivery | |
| Aluminium and Aluminium Alloys - Forgings Part 2: Mechanical Properties and Additional Property Requirements | |
| Aluminium and Aluminium Alloys - Liquid Metal - Specifications | |
| Aluminium and Aluminium Alloys - Master Alloys Produced by Melting - Specifications | |
| Aluminium and Aluminium Alloys - Unalloyed Aluminium Ingots for Remelting - Specifications | |
| Aluminium and Aluminium Alloys - Wrought Products - Chemical Composition of Semi Products Used for the Fabrication of Articles for Use in Contact with Food | |
| Audio, video and similar electronic apparatus - Safety requirements | |
| Audio, video and similar electronic apparatus \x97 Safety requirements | |
| Automotive Diesel Fuel | |
| Automotive fuels - Diesel - Requirements and test methods | |
| Automotive fuels - LPG - Requirements and test methods | |
| Automotive Liquefied Petroleum Gas | |
| Basic Dimensions of Winding Wires - Part 2: Specification for Maximum Overall Diameters of Enamelled Round Winding Wires | |
| Calculation of the Effective Parameters of Magnetic Piece Parts | |
| CENELEC standard voltages | |
| Coding of Indicating Devices and Actuators by Colours and Supplementary Means | |
| Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection Devices Which Permit Multi-Directional Mating, For Use with Rechargeable Batteries | |
| Connectors for Frequencies Below 3 MHz Part 9: Circular Connectors for Radio and Associated Sound Equipment | |
| Dimensions of Pot-Cores Made of Magnetic Oxides and Associated Parts | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories - Part 1: Definitions and General Requirements Common to All Parts | |
| Double-capped fluorescent lamps - Performance specifications | |
| Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods | |
| Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests Part 1: Specification according to use class | |
| Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests Part 1: Specification According to Hazard Class | |
| Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests Part 2: Classification and Labelling | |
| Electrical apparatus for explosive gas atmospheres Part 0: General requirements | |
| Electrical Apparatus for Explosive Gas Atmospheres Part 10: Classification of Hazardous Areas | |
| Electrical Apparatus for Explosive Gas Atmospheres Part 14: Electrical Installations in Hazardous Areas (Other than Mines) | |
| Electrical apparatus for explosive gas atmospheres Part 15: Type of protection \x93n\x94 | |
| Electrical Apparatus for Explosive Gas Atmospheres Part 17: Inspection and Maintenance of Electrical Installations in Hazardous Areas (Other than Mines) | |
| Electrical apparatus for explosive gas atmospheres Part 18: Construction, test and marking of type of protection encapsulation \x93m\x94 electrical apparatus | |
| Electrical apparatus for explosive gas atmospheres Part 1: Flameproof enclosures 'd' | |
| Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems | |
| Electrical apparatus for explosive gas atmospheres Part 26: Construction, test and marking of Group II Category 1 G electrical apparatus | |
| Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) | |
| Electrical apparatus for explosive gas atmospheres Part 2: Pressurized enclosures \x93p\x94 | |
| Electrical apparatus for explosive gas atmospheres Part 7: Increased safety \x93e\x94 | |
| Electrical Equipment of Industrial Machines Part 3: Particular Requirements Section 3.1: Sewing Machines, Units and Systems1990 | |
| Electrical Installations in Ships Part 507: Pleasure Craft | |
| Electrical Insulating Materials - Properties of THermal Endurance - Part 1: Ageing Procedures and Evaluation of Test Results | |
| Electrical Insulating Materials - Thermal Endurance Properties - Part 3: Instructions for Calculating Thermal Endurance Characteristics | |
| Electrical Insulating Materials - Thermal Endurance Properties - Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius | |
| Electrical Insulating Materials - Thermal Endurance Properties - Part 4-3: Ageing Ovens - Multi-chamber Ovens | |
| Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material | |
| Electrical insulating materials \x97 Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures | |
| Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria | |
| Electrical insulating materials Thermal endurance properties Part 4-1: Ageing ovens Single-chamber ovens | |
| Electrical insulating materials Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method | |
| Electrical insulating materials. Thermal endurance properties Determination of relative thermal endurance index (RTE) of an insulating material | |
| Electrical insulating materials. Thermal endurance properties. Determination of relative thermal endurance index (RTE) of an insulating material | |
| Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics | |
| Electrical insulation. Thermal classification | |
| Electroacoustics - Hearing aids Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal | |
| Electroacoustics Hearing aids Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes | |
| Electroacoustics Hearing aids Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions | |
| Environmental Testing - Part 1: General and Guidance | |
| Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads | |
| Environmental Testing - Part 2-58: Tests - Test Td: Test Methods for Solderability, Resistance to Dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD) | |
| Environmental Testing - Part 2-77: Tests - Test 77: Body Strength and Impact Shock | |
| Environmental Testing - Part 2-78: Tests - Test Cab: Damp Heat, Steady State | |
| Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components | |
| Environmental Testing - Part 2.1: Tests - Test XA and Guidance - Immersion in Cleaning Solvents | |
| Environmental Testing - Part 2: Test - Test Ka: Salt Mist | |
| Environmental testing - Part 2: Test methods - Test Fh: Vibration, broad-band random (digital control) and guidance | |
| Environmental Testing - Part 2: Tests - Guidance for Solar Radiation Testing | |
| Environmental testing - Part 2: Tests - Guidance on change of temperature tests | |
| Environmental testing - Part 2: Tests - Guidance on Test T. Soldering | |
| Environmental Testing - Part 2: Tests - Guidance on the Application of the Tests of IEC 60068 to Simulate the Effects of Storage | |
| Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12 Hour Cycle) | |
| Environmental testing - Part 2: Tests - Test Eh. Hammer tests | |
| Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal) | |
| Environmental testing - Part 2: Tests - Test Ff: Vibration - Time-history method | |
| Environmental Testing - Part 2: Tests - Test M: Low Air Pressure | |
| Environmental Testing - Part 2: Tests - Test N: Change of Temperature | |
| Environmental testing - Part 2: Tests - Test Q: Sealing | |
| Environmental Testing - Part 2: Tests - Test Sa: Simulated Solar Radiation at Ground Level | |
| Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination | |
| Environmental Testing - Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test | |
| Environmental Testing - Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests | |
| Environmental Testing - Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure and Damp Heat Test | |
| Environmental Testing - Part 2: Tests - Test Z/BM: Combined dry Heat/Low Air Pressure Tests | |
| Environmental testing - Part 2: Tests - Tests B: Dry Heat | |
| Environmental Testing - Part 2: Tests - Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens | |
| Environmental Testing - Part 2: Tests - Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens | |
| Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers | |
| Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests | |
| Environmental Testing - Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature Chambers | |
| Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers | |
| Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for Tests A and B (With Load) | |
| Environmental Testing - Part 3: Background Information - Section 1: Cold and Dry Heat Tests | |
| Environmental Testing - Part 3: Background Information - Section 2: Combined Temperature/Low Air Pressure Tests | |
| Environmental Testing - Part 4: Information for Specification Writers - Test Summaries | |
| Environmental Testing - Part 5: Guide to Drafting of test Methods - Terms and Definitions | |
| Environmental testing Part 2-10: Tests \x96 Test J and guidance: Mould growth | |
| Environmental testing Part 2-10: Tests Test J and guidance: Mould growth | |
| Environmental testing Part 2-18: Tests Tests R and guidance: Water | |
| Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections | |
| Environmental testing Part 2-43: Tests Test Kd: Hydrogen sulphide test for contacts and connections | |
| Environmental testing Part 2-53: Tests and guidance: Combined climatic (temperature/humidit y) and dynamic (vibration/shock) tests | |
| Environmental testing Part 2-54: Tests Test Ta: Solderability testing of electronic components by the wetting balance method | |
| Environmental testing Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) | |
| Environmental testing Part 2-64: Tests \x97 Test Fh: Vibration, broadband random and guidance | |
| Environmental testing Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components | |
| Environmental testing Part 2-69 - Tests \x96 Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method | |
| Environmental testing Part 2-74: Tests - Test Xc: Fluid contamination | |
| Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode | |
| Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis | |
| Environmental testing Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste | |
| Environmental testing Part 2.1 Tests Test Ec: Drop and topple, primarily for equipment-type specimens | |
| Environmental Testing Part 2.1: Tests Test Ed. Free Fall | |
| Environmental Testing Part 2.1: Tests Tests A. Cold | |
| Environmental testing Part 2: Methods of test Test Fg: Vibration, acoustically induced | |
| Environmental testing Part 2: Test methods Test Cx. Damp heat, steady state (unsaturated pressurized vapour) | |
| Environmental Testing Part 2: Test Methods Test Ef: Impact, Pendulum Hammer | |
| Environmental Testing Part 2: Test Methods Test Eg: Impact, Spring Hammer | |
| Environmental testing Part 2: Test methods Test Z/ABDM: Climatic sequence | |
| Environmental testing Part 2: Tests methods Test Fe: Vibration Sine beat method | |
| Environmental Testing Part 2: Tests Mounting of Components, Equipment and Other Articles for Dynamic Tests Including Shock (Ea), Bump (Eb), Vibration (Fc and Fd) and Steady-State Acceleration (Ga) and Guidance... | |
| Environmental testing Part 2: Tests Test Cy: Damp heat, steady state, accelerated test primarily intended for components | |
| Environmental Testing Part 2: Tests Test E3 and Guidance: Bounce | |
| Environmental testing Part 2: Tests Test Ea and guidance: Shock | |
| Environmental testing Part 2: Tests Test Eb and guidance: Bump | |
| Environmental Testing Part 2: Tests Test Ga and Guidance: Acceleration, Steady State | |
| Environmental testing Part 2: Tests Test Kb. Salt mist cyclic (sodiumchloride solution) | |
| Environmental testing Part 2: Tests Test Ke: Flowing mixed gas corrosion test | |
| Environmental testing Part 2: Tests Test L: Dust and sand | |
| Environmental testing Part 2: Tests Test Te: Solderability testing of electronic components for surface mount technology by the wetting balance method | |
| Environmental Testing Part 2: Tests Test U: Robustness of Terminations and Integral Mounting Devices | |
| Environmental testing Part 2: Tests Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands | |
| Environmental testing Part 3-13: Supporting documentation and guidance on Test T - Soldering | |
| Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests | |
| Environmental testing Part 3: Guidance Seismic test methods for equipments | |
| Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres | |
| Explosive atmospheres - Part 10-2: Classification of areas - Combustible dust atmospheres | |
| Explosive atmospheres - Part 11: Equipment protection by intrinsic safety \x93i\x94 | |
| Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation | |
| Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation | |
| Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases | |
| Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen | |
| Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements | |
| Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance | |
| Explosive atmospheres - Part 5: Equipment protection by powder filling \x93q\x94 | |
| Explosive atmospheres - Part 6: Equipment protection by oil immersion \x93o\x94 | |
| Explosive atmospheres Part 0: Equipment - General requirements | |
| Explosive atmospheres Part 13: Equipment protection by pressurized room \x93p\x94 | |
| Explosive atmospheres Part 18: Equipment protection by encapsulation "m" | |
| Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation | |
| Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d" | |
| Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification - Test methods and data | |
| Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation | |
| Explosive atmospheres Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases | |
| Explosive atmospheres Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems | |
| Explosive atmospheres Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases | |
| Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" | |
| Explosive atmospheres Part 32-2: Electrostatics hazards - Tests | |
| Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion | |
| Explosive atmospheres Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters | |
| Explosive atmospheres Part 5: Equipment protection by powder filling \x93q\x94 | |
| Explosive atmospheres Part 6: Equipment protection by oil immersion \x93o\x94 | |
| Explosive atmospheres: Part 7: Equipment protection by increased safety "e" | |
| Fibre Cement Pipes for Drains and Sewers - Part 2: Manholes and Inspection Chambers | |
| Fibre-Cement Pipes for Sewers and Drains Part 1: Pipes, Joints and Fittings for Gravity Systems | |
| Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump- Turbines | |
| Fixed Resistors for Use in Electronic Equipment - Part 1: Generic Specification | |
| Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors | |
| Fixed resistors for use in electronic equipment Part 1: Generic specification | |
| Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistors | |
| Fixed resistors for use in electronic equipment Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G | |
| Fixed resistors for use in electronic equipment Part 8: Sectional specification - Fixed surface mount resistors | |
| Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification Fixed surface mount resistor networks with individually measurable resistors Assessment level EZ | |
| Flanges for Waveguides - Part 2: Relevant Specifications for Flanges for Ordinary Rectangular Waveguides | |
| Flanges for waveguides Part 1: General requirements | |
| Flanges for waveguides Part 4: Relevant specifications for flanges for circular waveguides | |
| Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 1: Ignition source: smouldering cigarette | |
| Furniture - Assessment of the Ignitability of Mattresses and Upholstered Bed Bases - Part 2: Ignition Source: Match Flame Equivalent | |
| Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Processes up to 200 Bar | |
| Glass in building Basic soda lime silicate glass products Part 9: Evaluation of conformity/Product standard | |
| Glass reinforced plastics \x97 Determination of indentation hardness by means of a Barcol hardness tester | |
| Glow-Starters for Fluorescent Lamps | |
| Grid Systems for Printed Circuits | |
| Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 3: Instructions for Calculating Thermal Endurance Characteristics Section 3.2: Calculations for Incomplete Data: Proof Test Results up... | |
| Hearing Aids - Part 14: Specification of a Digital Interface Device | |
| Hearing Aids - Part 4: Magnetic Field Strength in Audio-Frequency Induction Loops for Hearing Aid Purposes | |
| Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids | |
| Hearing Aids Part 0: Methods for Measurement of Electroacoustical Characteristics | |
| Hearing Aids Part 12: Dimensions of Electrical Connector Systems | |
| Hearing Aids Part 13: Electromagnetic Compatibility (EMC) - Product Standard | |
| Hearing Aids Part 1: Hearing Aids with Induction Pick-UP Coil Input | |
| Hearing Aids Part 2: Methods for Measurement of Electroacoustical Characteristics of Hearing Aids with Automatic Gain Control Circuits | |
| High voltage test techniques - Part 3: Definitions and requirements for on-site tests | |
| High-Pressure Mercury Vapour Lamps - Performance Specifications | |
| High-voltage test techniques Part 1: General definitions and test requirements | |
| High-Voltage Test Techniques Part 2: Measuring Systems | |
| Hollow metallic waveguides Part 1: General requirements and measuring methods | |
| Hollow metallic waveguides Part 2: Relevant specifications for ordinary rectangular waveguides | |
| Hollow metallic waveguides Part 4: Relevant specifications for circular waveguides | |
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests | |
| IEC Standard Current Ratings | |
| IEC standard frequencies | |
| Industrial Valves - Metallic Butterfly Valves | |
| Instrument Transformers - Part 1: Current Transformers | |
| Instrument Transformers - Part 2: Inductive Voltage Transformers | |
| Instrument transformers - Part 3: Combined transformers | |
| Instrument Transformers - Part 6: Requirements for Protective Current Transformers for Transient Performance | |
| Instrument Transformers - Part 7: Electronic Voltage Transformers | |
| Instrument transformers Part 5: Capacitor voltage transformers | |
| Instrument transformers Part 8: Electronic current transformers | |
| Insulating Bushings for Alternating Voltages Above 1 kV | |
| Insulating Liquids - Determination of the Breakdown Voltage at Power Frequency - Test Method | |
| Insulation co-ordination - Part 1: Definitions, principles and rules | |
| Insulation Co-Ordination - Part 2: Application Guide | |
| Insulation co-ordination Part 12: Application guidelines for LCC HVDC converter stations | |
| Insulation Co-Ordination Part 1: Definitions, Principles and Rules | |
| Insulation co-ordination Part 5: Procedures for high-voltage direct current (HVDC) converter stations | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 3: Gauges | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 4: Guidelines and General Information | |
| Lead-Acid Starter Batteries Part 1: Part 1: General Requirements and Methods of Test | |
| Lead-Acid Starter Batteries Part 2: Dimensions of Batteries and Dimensions and Marking of Terminals | |
| Lead-Acid Starter Batteries Part 4: Dimensions of Batteries for Heavy Commercial Vehicles | |
| Letter symbols to be used in electric technology - Part 4: Rotating electric machines | |
| Letter symbols to be used in electrical technology - Part 1: General | |
| Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics | |
| Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units | |
| Letter symbols to be used in electrical technology - Part 6: Control technology | |
| Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution | |
| Low Pressure Sodium Vapour Lamps | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 1: Specification for General Conditions and Requirements | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 3: Methods of Measuring the Characteristics or Recording and Reproducing Equipment for Sound on Magnetic Tape | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 4: Mechanical Magnetic Tape Properties | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 5: Specification for Electrical Magnetic Tape Properties | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 7: Specification for Cassettes for Commercial Tape Records and Domestic Use | |
| Marking Codes for Resistors and Capacitors | |
| Mechanical Standardization of Semiconductor Devices - Part 3: General Rules for the Preparation of Outline Drawings of Integrated Circuits | |
| Mechanical Standardization of Semiconductor Devices - Part 4: Coding System and Classification into Forms of Package Outlines for Semiconductor Device Packages | |
| Mechanical Standardization of Semiconductor Devices - Part 6-12: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages Design Guide for Fine-Pitch Land Grid Array (FLGA)... | |
| Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA) | |
| Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA | |
| Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals | |
| Mechanical Standardization of Semiconductor Devices - Part 6-2: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Design Guide for 1,50 mm, 1,27 mm... | |
| Mechanical Standardization of Semiconductor Devices - Part 6-3: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Measuring Methods for Package Dimensions of Quad... | |
| Mechanical Standardization of Semiconductor Devices - Part 6-5: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Design Guide for Fine-Pitch Ball Grid Array... | |
| Mechanical Standardization of Semiconductor Devices - Part 6-6: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Design Guide for Fine Pitch Land Grid... | |
| Mechanical Standardization of Semiconductor Devices - Part 6-8: General Rules for the Preparation of Outline Drawings of Surface Mounted Semiconductor Device Packages - Design Guide for Glass Sealed Ceramic Quad... | |
| Mechanical standardization of semiconductor devices Part 4: Coding system and classification into forms of package outlines for semiconductor device packages | |
| Mechanical standardization of semiconductor devices Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages Dimensions of P-VSON | |
| Mechanical standardization of semiconductor devices Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball... | |
| Mechanical standardization of semiconductor devices Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA) | |
| Mechanical standardization of semiconductor devices Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage | |
| Mechanical standardization of semiconductor devices Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline... | |
| Mechanical standardization of semiconductor devices Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline... | |
| Mechanical standardization of semiconductor devices Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball... | |
| Mechanical standardization of semiconductor devices Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages Measuring methods for package dimensions of ball grid array... | |
| Mechanical standardization of semiconductor devices Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials | |
| Method of measurement of current noise generated in fixed resistors | |
| Methods of Measurement on Receivers for Television Broadcast Transmissions Part 1: General Considerations - Measurements on Displays at Radio and Video Frequencies | |
| Methods of Measurement on Receivers for Television Broadcast Transmissions Part 2: Audio Channels - General Methods and Methods for Monophonic Channels | |
| Methods of Measurement on Receivers for Television Broadcast Transmissions Part 7: HDTV Displays | |
| Miniature Fuses - Part 10: User Guide for Miniature Fuses | |
| Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| Miniature fuses - Part 2: Cartridge fuse-links | |
| Miniature Fuses - Part 4: Universal Modular Fuse-Links (UMF) | |
| Miniature Fuses - Part 5: Guide for the Quality Assessment of Miniature Fuse-Links | |
| Miniature Fuses Part 1: Definitions for Miniature Fuses and General Requirements for Miniature Fuse-Links | |
| Miniature fuses Part 2: Cartridge fuse-links | |
| Miniature Fuses Part 2: Specification for Cartridge Fuse-Links | |
| Miniature Fuses Part 3: Specification for Sub-Miniature Fuse-Links | |
| Miniature fuses Part 3: Sub-miniature fuse-links | |
| Miniature fuses Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types | |
| Miniature Fuses Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links | |
| Miniature fuses Part 7: Miniature fuse-links for special applications | |
| Natural Rubber Latex Male Condoms | |
| Non-Destructive Testing - Industrial Radiographic Film Part 1: Classification of Film Systems for Industrial Radiography | |
| Non-Destructive Testing - Industrial Radiographic Film Part 2: Control of Film Processing by Means of Reference Values | |
| Non-Destructive Testing - Ultrasonic Examination - Part 1: General Principles | |
| Non-Destructive Testing - Ultrasonic Examination - Part 2: Sensitivity and Range Setting | |
| Non-Destructive Testing - Ultrasonic Examination - Part 5: Characterization and Sizing of Discontinuities | |
| Non-Destructive Testing - Ultrasonic Examination Part 3: Transmission Technique | |
| Non-destructive testing - Ultrasonic examination Part 6 - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities | |
| Non-destructive testing Ultrasonic examination Part 4: Examination for discontinuities perpendicular to the surface | |
| On-load tap-changers | |
| Outdoor Furniture - Seating and Tables for Camping, Domestic and Contract Use - Part 3: Mechanical Safety Requirements and Test Methods for Tables | |
| Outdoor Furniture - Seating and Tables for Camping, Domestic and Contract Use Part 1: General Safety Requirements | |
| Outdoor furniture - Seating and tables for camping, domestic and contract use Part 2: Mechanical safety requirements and test methods for seating | |
| Plastics Piping Systems - Crosslinked Polyethylene (PE - X) Pipes - Determination of Degree of Crosslinking by Solvent Extraction | |
| Plastics Piping Systems - Plastics Pipes and Fittings - Determination of the Opacity | |
| Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes - Test Method for the Resistance to Dichloromethane at a Specified Temperature (DCMT) | |
| Power Capacitors for Induction Heating Installations - Part 1: General | |
| Power transformer and reactor cooling equipment Part 22-2: Removable radiators | |
| Power Transformers - Part 10: Determination of Sound Levels | |
| Power transformers - Part 18: Measurement of frequency response | |
| Power Transformers - Part 5: Ability to withstand Short Circuit | |
| Power transformers - Part 6: Reactors | |
| Power transformers Part 11: Dry-type transformers | |
| Power transformers Part 13: Self-protected liquid-filled transformers | |
| Power transformers Part 14: Liquid-immersed power transformers using high-temperature insulation materials | |
| Power transformers Part 16: Transformers for wind turbines applications | |
| Power transformers Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors | |
| Power Transformers Part 1: General | |
| Power Transformers Part 2: Temperature Rise | |
| Power Transformers Part 3: Insulation Levels, Dielectric Tests and External Clearances in Air | |
| Power Transformers Part 4: Guide to the Lightning Impulse and Switching Impulse Testing Power Transformers and Reactors | |
| Preferred number series for resistors and capacitors | |
| Preparation of Outline Drawings for Cathode-Ray Tubes, Their Components, Connections and Gauges | |
| Primary Batteries - Part 5:Safety of Batteries with Aqueous Electrolyte | |
| Primary Batteries Part 1: General | |
| Primary Batteries Part 2: Specification Sheets | |
| Primary Batteries Part 3: Watch Batteries | |
| Primary Batteries Part 4: Safety Standard for Lithium Batteries | |
| Printed board design, manufacture and assembly Terms and definitions | |
| Quartz crystal units of assessed quality - Part 1: Generic specification | |
| Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections | |
| Quartz crystal units of assessed quality Part 1: Generic specification | |
| Radio-Frequency Connectors - Part 25: Two-Pole Screw (3/4-20 UNEF) Coupled Connectors for Use with Shielded Balanced Cables Having Twin Inner Conductors with Inner Diameter of Outer Conductor 13,56 mm (0,534... | |
| Radio-Frequency Connectors Part 21: Two Types of Radio-Frequency Connectors with Inner Diameter of Outer Conductor 9,5 mm (0,374 in) with Different Versions of Screw Coupling - Characteristics Impedance 50 Ohms... | |
| Radio-frequency connectors Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) | |
| Radio-frequency connectors Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) | |
| Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules | |
| Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules | |
| Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers | |
| Railway applications Electric equipment for rolling stock Part 4: Electrotechnical components Rules for AC circuit-breakers | |
| Railway applications Electrotechnical equipment for rolling stock Part 5: Electrotechnical components Rules for HV fuses | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 5: Electrical Measurements on Multichannel Sound Television Receivers Using the NICAM Two-Channel Digital Sound-System | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 8: Measurements on D2-MAC/Packet Equipment | |
| Rotating Electrical Machines - Part 14: Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher - Measurement, Evaluation and Limits of Vibration | |
| Rotating Electrical Machines - Part 18-22: Functional Evaluation of Insulation Systems - Test Procedures for Wire-Wound Windings - Classification of Changes and Insulation Component Substitutions | |
| Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) | |
| Rotating Electrical Machines - Part 22: AC Generators for Reciprocating Internal Combustion (RIC) Engine Driven Generating Sets | |
| Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors | |
| Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motor | |
| Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise | |
| Rotating Electrical Machines - Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery From Tests (Excluding Machines for Traction Vehicles) | |
| Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) | |
| Rotating Electrical Machines - Part 3: Specific Requirements for Turbine-Type Synchronous Machines | |
| Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification | |
| Rotating electrical machines - Part 8: Terminal markings and direction of rotation | |
| Rotating electrical machines Part 11: Thermal protection | |
| Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 690 V, 50 Hz | |
| Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating a.c. Machines with Form-Wound Stator Coils | |
| Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions | |
| Rotating electrical machines Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance | |
| Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems | |
| Rotating electrical machines Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests | |
| Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 1: General Guidelines | |
| Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 21: Test Procedures for Wire-Wound Windings - Thermal Evaluation and Classification | |
| Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 31: Test Procedures for Form-Wound Windings - Thermal Evaluation and Classification of Insulation Systems Used in Machines up to... | |
| Rotating electrical machines Part 18\x9641: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters \x97 Qualification and quality control tests | |
| Rotating electrical machines Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies | |
| Rotating Electrical Machines Part 1: Rating and Performance | |
| Rotating electrical machines Part 2-2: Specific methods for determining separate losses of large machines from tests | |
| Rotating electrical machines Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines | |
| Rotating electrical machines Part 30-1: Efficiency classes of line operated AC motors (IE code) | |
| Rotating Electrical Machines Part 4: Methods for Determining Synchronous Machine Quantities from Tests | |
| Rotating Electrical Machines Part 6: Methods of Cooling (IC Code) | |
| Rotating Electrical Machines Part 7: Classification of Types of Constructions and Mounting Arrangements (IM Code) | |
| Rotating electrical machines Part 8: Terminal markings and direction of rotation | |
| Rotating Electrical Machines Part 9: Noise Limits | |
| Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 000 V A.C. or 1 500 V D.C. and Not Exceeding... | |
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements | |
| Safety of Machinery - Electrical Equipment of Machines - Part 31: Particular Requirements for Sewing Machines, Units and Systems | |
| Safety of Machinery - Electrical Equipment of Machines - Part 32: Requirements for Hoisting Machines | |
| Safety of Machinery - Electrical Equipment of Machines Part 1: Specification for General Requirements | |
| Safety of machinery - Electrical equipment of machines Part 33: Requirements for semiconductor fabrication equipment | |
| Safety of Machinery - Two-Hand Control Devices - Functional Aspects - Principles for Design | |
| Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use | |
| Safety Requirements for Radio Transmitting Equipment | |
| Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-1: Specifications of Basic Requirements | |
| Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors | |
| Semiconductors Convertors - Part 2: Self-Commutated Semiconductor Converters Including Direct D.C. Converters | |
| Series Capacitors for Power Systems Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation | |
| Series capacitors for power systems Part 1: General | |
| Series Capacitors for Power Systems Part 2: Protective Equipment for Series Capacitor Banks | |
| Series Capacitors for Power Systems Part 3: Internal Fuses | |
| Series capacitors for power systems Part 4: Thyristors controlled series capacitors | |
| Series Capacitors for Power Systems | |
| Standard conditions for use prior to and during the testing of solid electrical insulating materials | |
| Steam Turbine Procurement | |
| Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems | |
| Surge Arresters Part 1: Non-Linear Resistor Type Gapped Surge Arresters for a.c. Systems | |
| Surge Arresters Part 4: Metal-Oxide Surge Arresters Without Gaps for a.c. Systems | |
| Surge Arresters Part 5: Selection and Application Recommendations | |
| Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV | |
| Surge arresters Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations | |
| Tap-changers - Part 1: Performance requirements and test methods | |
| Test Procedure for the Determination of the Temperature Index of Enamelled Winding Wires | |
| Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater Than 1 000 V | |
| Thermal Spraying - Determination of Tensile Adhesive Strength | |
| Timber Structures - Test Methods - Racking Strength and Stiffness of Timber Frame Wall Panels | |
| Timber Structures - Test Methods - Soft Body Impact Test of Timber Framed Walls | |
| Timber Structures - Test Methods - Test of Trusses for the Determination of Strength and Deformation Behaviour | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys \x97 Chemical composition and form of wrought products Part 3: Chemical composition and form of products | |
| Tracked Changes (Redline) - Automotive fuels - Diesel - Requirements and test methods | |
| Tracked Changes (Redline) - Automotive fuels - LPG - Requirements and test methods | |
| Tracked Changes (Redline) - Direct acting indicating analogue electrical measuring instruments and their accessories Part 1: Definitions and general requirements common to all parts | |
| Tracked Changes (Redline) - Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests Part 2: Labelling | |
| Tracked Changes (Redline) - Environmental testing Part 2-18: Tests \x97 Test R and guidance: Water | |
| Tracked Changes (Redline) - Environmental testing Part 2-39: Tests \x97 Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests | |
| Tracked Changes (Redline) - Environmental testing Part 2-60: Tests \x97 Test Ke: Flowing mixed gas corrosion test | |
| Tracked Changes (Redline) - Environmental testing Part 3-13: Supporting documentation and guidance on Test T \x97 Soldering | |
| Tracked Changes (Redline) - Environmental testing Part 3-5: Supporting documentation and guidance \x96 Confirmation of the performance of temperature chambers | |
| Tracked Changes (Redline) - Explosive atmospheres Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" | |
| Tracked Changes (Redline) - Explosive atmospheres Part 14: Electrical installations design, selection and erection | |
| Tracked Changes (Redline) - Explosive atmospheres Part 26: Equipment with Equipment Protection Level (EPL) Ga | |
| Tracked Changes (Redline) - Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation | |
| Tracked Changes (Redline) - Explosive atmospheres Part 29-2: Gas detectors \x97 Selection, installation, use and maintenance of detectors for flammable gases and oxygen | |
| Tracked Changes (Redline) - Explosive atmospheres Part 30-1: Electrical resistance trace heating \x97 General and testing requirements | |
| Tracked Changes (Redline) - Explosive atmospheres Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance | |
| Tracked Changes (Redline) - Explosive atmospheres Part 5: Equipment protection by powder filling \x93q\x94 | |
| Tracked Changes (Redline) - Flanges for waveguides Part 1: General requirements | |
| Tracked Changes (Redline) - Flanges for waveguides Part 2: Relevant specifications for flanges for ordinary rectangular waveguides | |
| Tracked Changes (Redline) - Furniture \x97 Assessment of the ignitability of mattresses and upholstered bed bases Part 1: Ignition source smouldering cigarette | |
| Tracked Changes (Redline) - Furniture \x97 Assessment of the ignitability of mattresses and upholstered bed bases Part 2: Ignition source: match flame equivalent | |
| Tracked Changes (Redline) - Industrial valves - Metallic butterfly valves for general purposes | |
| Tracked Changes (Redline) - Miniature fuses Part 3: Sub-miniature fuse-links | |
| Tracked Changes (Redline) - Outdoor furniture \x97 Seating and tables for camping, domestic and contract use Part 1: General safety requirements | |
| Tracked Changes (Redline) - Outdoor furniture \x97 Seating and tables for camping, domestic and contract use Part 3: Mechanical safety requirements for tables | |
| Tracked Changes (Redline) - Power transformers Part 10: Determination of sound levels | |
| Tracked Changes (Redline) - Primary batteries Part 1: General | |
| Tracked Changes (Redline) - Primary batteries Part 2: Physical and electrical specifications | |
| Tracked Changes (Redline) - Primary batteries Part 3: Watch batteries | |
| Tracked Changes (Redline) - Primary batteries Part 5: Safety of batteries with aqueous electrolyte | |
| Tracked Changes (Redline) - Railway applications - Electric equipment for rolling stock Part 1: General service conditions and general rules | |
| Tracked Changes (Redline) - Railway applications - Electric equipment for rolling stock Part 2: Electrotechnical components - General rules | |
| Tracked Changes (Redline) - Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors | |
| Tracked Changes (Redline) - Rotating electrical machines Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests | |
| Tracked Changes (Redline) - Safety of machinery - Electrical equipment of machines Part 1: General requirements | |
| Tracked Changes (Redline) - Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires | |
| Tracked Changes (Redline) \x96 Explosive atmospheres Part 10-2: Classification of areas \x97 Explosive dust atmospheres | |
| Tracked Changes (Redline) \x96 Explosive atmospheres Part 6: Equipment protection by liquid immersion \x93o\x94 | |
| Tubular Fluorescent Lamps for General Lighting Service | |
| Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements | |
| Tungsten Filment Lamps for Domestic and Similar General Lighting Purposes - Performance Requirements | |
| User Manuals for in Vitro Diagnostic Instruments for Home Use | |
| User Manuals for in Vitro Diagnostic Instruments for Professional Use | |
| Voltage measurement by means of standard air gaps |
| << Prev | Next >> |