Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
590
600
610
620
630
640
642
643
644
645
646
647
648
649
650
651
652
653
654
660
670
680
690
700
710
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| A framework for digital preservation of cinematographic works \x96 The Cinema Preservation Package | |
| Accessibility and usability of the built environment \x96 Functional requirements | |
| Adhesives \x96 Wood-to-wood adhesive bonds for non-structural applications \x96 Determination of shear strength by compressive loading | |
| Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability | |
| Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack | |
| Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack | |
| Agricultural machinery \x96 Self-propelled agricultural and forestry vehicles \x96 Requirements for braking | |
| Algae and algae products \x96 Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes \x96 Detection and identification with morphological and/or molecular methods | |
| Algae and algae products \x96 Methods for the determination of productivity of algae growth sites | |
| Algae and algae products \x96 Methods of sampling and analysis \x96 Sample treatment | |
| Algae and algae products \x96 Terms and definitions | |
| Aluminium and aluminium alloys - -Drawing stock - Part 4: Specific requirements for welding applications | |
| Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties | |
| Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications | |
| Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) | |
| Aluminium and aluminium alloys \x96 Castings \x96 Chemical composition and mechanical properties | |
| Ambient air \x96 Standard method for the determination of the concentration of ammonia using diffusive samplers | |
| Animal feeding stuffs \x96 Methods of sampling and analysis \x96 Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC) | |
| Animal feeding stuffs \x96 Methods of sampling and analysis \x96 Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD) | |
| Animal feeding stuffs \x96 Methods of sampling and analysis \x96 Determination of pyrrolizidine alkaloids in animal feeding stuff by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography \x96 UV detection (HPLC-UV) | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and... | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of gossypol in cotton seed and feeding stuff by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of inorganic arsenic in animal feed by anion-exchange HPLC-ICP-MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of iodine in animal feed by ICP-MS | |
| Animal Feeding stuffs: Methods of sampling and analysis \x96 Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS) | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with on-line HPLC-GC-FID analysis | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of pentachlorophenol (PCP) in feed materials and compound feed by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of the radionuclides Iodine-131, Caesium-134 and Caesium-137 in feed | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of theobromine in feed materials and compound feed, including cocoa derived ingredients, by liquid chromatography | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method) | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of vitamin A, E and D content \x96 Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)... | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Identification of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-additive levels in compound feed \x96 Confirmatory analysis by LC-MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Screening and determination of authorized coccidiostats at additive and 1 % and 3 % cross-contamination levels, and of non-registered coccidiostats and... | |
| Automotive fuels and fat and oil derivates \x96 Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) \x96 Method by GC-FID | |
| Beauty Salon Services \x96 Requirements and recommendations for the provision of service | |
| Bio-based products \x96 Determination of the oxygen content using an elemental analyser | |
| Biometrics multilingual vocabulary based upon the English version of ISO/IEC 2382-37:2012 | |
| Bitumen and bituminous binders \x96 Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) \x96 BTSV test | |
| Building automation and control systems \x96 Control applications | |
| Building information modelling (BIM) \x96 Semantic modelling and linking (SML) \x96 Part 1: Generic modelling patterns | |
| Building information modelling (BIM) \x96 Semantic modelling and linking (SML) \x96 Part 2: Domain-specific modelling patterns | |
| Building information modelling \x96 Information structure based on EN ISO 16739 1 to exchange data templates and data sheets for construction objects \x96 Part 2: Configurable construction objects and requirements... | |
| Building Information Modelling \x96 Level of Information Need \x96 Part 1: Concepts and principles | |
| Cathodic protection of internal surfaces of metallic tanks, structures, equipment, and piping containing seawater | |
| Central heating boilers \x96 Specification for indirectly heated unvented (closed) pressurized buffer tanks \x96 Requirements, testing and marking | |
| Characterisation of one component foam \x96 Part 1: Foam yield characteristics | |
| Characterisation of one component foam \x96 Part 2: Expansion characteristics | |
| Characterisation of one component foam \x96 Part 3: Application | |
| Characterisation of one component foam \x96 Part 4: Mechanical strength | |
| Characterisation of one component foam \x96 Part 5: Insulation | |
| Characterization of bulk materials \x96 Determination of a size-weighted fine fraction and crystalline silica content \x96 Part 1: General information and choice of test methods | |
| Characterization of bulk materials \x96 Determination of a size-weighted fine fraction and crystalline silica content \x96 Part 2: Calculation method | |
| Characterization of bulk materials \x96 Determination of a size-weighted fine fraction and crystalline silica content \x96 Part 3: Sedimentation method | |
| Characterization of sludge \x96 Evaluation of sludge density | |
| Chemical disinfectants and antiseptics \x96 Chemical textile disinfection for the domestic area \x96 Test method and requirements (phase 2, step 2) | |
| Chemical disinfectants and antiseptics \x96 Hygienic handrub virucidal \x96 Test method and requirements (phase 2/step 2) | |
| Chemical disinfectants and antiseptics \x96 Methods of airborne room disinfection by automated process \x96 Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities | |
| Chemical disinfectants and antiseptics \x96 Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area \x96 Test method and requirements (phase 2, step 2)... | |
| Chemical disinfectants and antiseptics \x96 Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area \x96 Test method and requirements... | |
| Chemical disinfectants and antiseptics \x96 Quantitative surface test for the evaluation of teat disinfectants used in the veterinary area \x96 Test method and requirements (phase 2 step 2) | |
| Chemical disinfectants and antiseptics \x96 Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area \x96 Test method and requirements (phase 2, step 1)... | |
| Chemical disinfectants and antiseptics \x96 Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action... | |
| Child care articles \x96 Bath tubs, stands and non-standalone bathing aids \x96 Safety requirements and test methods | |
| Children\x92s Furniture \x96 Seating for children \x96 Safety requirements and test methods | |
| Classification for bicycles usage | |
| Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types) | |
| Classification of wood adhesives for non-structural timber products for exterior use | |
| Cleanrooms and associated controlled environments \x96 Biocontamination control | |
| Climbing/bouldering walls for use in the water area of swimming pools of public use \x96 Safety and operational requirements | |
| Components for BAC control loop \x96 Sensors \x96 Part 1: Room temperature sensors | |
| Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment \x96 Lock fittings | |
| Conservation of cultural heritage \x96 Determination of water absorption by contact sponge method | |
| Conservation of Cultural Heritage \x96 Finishes of built heritage \x96 Investigation and documentation | |
| Conservation of cultural heritage \x96 Historic timber structures \x96 Guidelines for the on-site assessment of load-bearing timber structures | |
| Conservation of Cultural Heritage \x96 Methods and materials for cleaning porous inorganic materials | |
| Conservation of cultural heritage \x96 Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage | |
| Conservation of cultural heritage \x96 Procurement of conservation services and works | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of inorganic substances in eluates and digests \x96 Analysis by inductively coupled plasma mass spectrometry (ICP-MS) | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of inorganic substances in eluates and digests \x96 Analysis by inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of organic substances in eluates | |
| Construction products: Assessment of release of dangerous substances \x96 Content of inorganic substances \x96 Methods for analysis of aqua regia digests | |
| Construction products: Assessment of release of dangerous substances \x96 Content of organic substances \x96 Methods for extraction and analysis | |
| Construction products: Assessment of release of dangerous substances \x96 Digestion by aqua regia for subsequent analysis of inorganic substances | |
| Construction products: Assessment of release of dangerous substances \x96 Dose assessment of emitted gamma radiation | |
| Construction products: Assessment of release of dangerous substances \x96 Preparation of test portions from the laboratory sample for testing of release and analysis of content | |
| Continuous-fibre-rei nforced plastic composites \x96 Pultruded unidirectional rods \x96 Determination of tensile properties in parallel to the fibre direction | |
| Copper and copper alloys - Strip for lead frames | |
| Copper and copper alloys \x96 Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil | |
| Cosmetics \x96 Analytical methods \x96 LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU | |
| Cultural heritage \x96 Assessment and monitoring of archaeological deposits for preservation in situ | |
| Cycles \x96 Electrically power assisted cycles \x96 EPAC Mountain bikes | |
| Data protection and privacy by design and by default | |
| Design and construction of backfilled and grouted borehole heat exchangers | |
| Design for All \x96 Accessibility following a Design for All approach in products, goods and services \x96 Extending the range of users | |
| Detail specification: Circular connectors \x96 Round contacts, size diameter 1,6 mm, threaded coupling | |
| Detail Specification: High density rectangular connectors, round removable crimp contacts | |
| Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable | |
| Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows | |
| Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality | |
| Determination of burning behaviour of dust layers | |
| Determination of compressive shear strength of wood adhesives at elevated temperatures | |
| Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air | |
| Determination of screw pull out forces from screw thread channels | |
| Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete | |
| Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry | |
| Determination of the strength of infill supports \x96 Test method and requirements | |
| Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions \x96 Method by measurement of pressure increase | |
| Digital Information Interchange in the Insurance Industry \x96 Transfer of electronic documents \x96 Part 1: Process and Data Model | |
| District cooling pipes \x96 Bonded single pipe systems for directly buried cold water networks \x96 Part 1: Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation... | |
| District cooling pipes \x96 Bonded single pipe systems for directly buried cold water networks \x96 Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation... | |
| District cooling pipes \x96 Bonded single pipe systems for directly buried cold water networks \x96 Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal... | |
| District cooling pipes \x96 Factory made flexible pipe systems \x96 Part 1: Classification, general requirements and test methods | |
| District cooling pipes \x96 Factory made flexible pipe systems \x96 Part 2: Bonded system with plastic service pipes; requirements and test methods | |
| District cooling pipes \x96 Factory made flexible pipe systems \x96 Part 3: Non bonded system with plastic service pipes; requirements and test methods | |
| District heating and district cooling pipe systems \x96 Terms and definitions | |
| Domestic and non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW | |
| Domestic appliances used for drinking water treatment not connected to water supply \x96 Jug water filter systems \x96 Safety and performance requirements, labeling and information to be supplied | |
| Domestic furniture \x96 Beds and mattresses \x96 Safety requirements and test methods | |
| Domestic spas/whirlpool spas/hot tubs \x96 Safety requirements and test methods | |
| Domestic swimming pools \x96 Environmental performance efficiency \x96 Performance evaluation, methodology, and classification of the use of outdoor pools and their equipment | |
| Earthworks \x96 Chemical tests \x96 Part 1: Determination of loss on ignition | |
| Earthworks \x96 Geotechnical laboratory tests \x96 Part 1: Degradability test standard | |
| Earthworks \x96 Geotechnical laboratory tests \x96 Part 2: Fragmentability test standard | |
| Earthworks \x96 Geotechnical laboratory tests \x96 Part 3: Methylene blue value VBS on soils and rocks | |
| Electronic cigarettes and e-liquids \x96 Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type | |
| Electronic cigarettes and e-liquids \x96 Reference e-liquids | |
| Energy measurement and monitoring plan \x96 Design and implementation \x96 Principles for energy data collection | |
| Energy Performance Contracts \x96 Minimum requirements | |
| Energy performance of buildings \x96 Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient \x96 General Principles, Module M1-7 | |
| Entertainment technology \x96 Machinery for stages and other production areas \x96 Safety requirements and inspections | |
| Entertainment technology \x96 Specifications for design and manufacture of aluminium and steel trusses | |
| Environmental Solid Matrices \x96 Determination of polychlorinated biphenyls (PCB) by gas chromatography \x96 mass selective detection (GC-MS) or electron-capture detection (GC-ECD) | |
| Ergonomics \x96 Ergonomics of PPE ensembles | |
| European CBRNE glossary | |
| Fertilizers \x96 Determination of boron in concentrations >10 % using acidimetric titration | |
| Fertilizers \x96 Determination of boron in concentrations = 10 % using spectrometry with azomethine-H | |
| Fertilizers \x96 Determination of molybdenum in concentrations = 10 % using spectrometry of a complex with ammonium thiocyanate | |
| Fertilizers \x96 Determination of nitrification inhibitor DMPSA in fertilizers \x96 Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers \x96 Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD) | |
| Fertilizers \x96 Determination of perchlorate in mineral fertilizers by liquid chromatography and tandem mass spectrometry detection (LC-MS/MS) | |
| Fibre cement products \x96 Determination of pull through and shear resistance and bending strength calculations \x96 Part 1: Flat sheets | |
| Fibre-cement products \x96 Determination of pull through and shear resistance and bending strength calculations \x96 Part 2: Profiled sheets | |
| Fire extinguishing systems in commercial kitchens \x96 System design, documentation, and test requirements | |
| Fitness centres \x96 Requirements for centre amenities and operation \x96 Operational and managerial requirements | |
| Fitness centres \x96 Requirements for centre amenities and operation \x96 Part 2: Requirements for supervision and staff | |
| Fixed firefighting systems \x96 Water mist components \x96 Part 1: Product characteristics and test methods for strainer and filter components | |
| Fixed firefighting systems \x96 Water mist systems \x96 Part 2: Product characteristics and test methods for nozzles | |
| Fixed time cybersecurity evaluation methodology for ICT products | |
| Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS \xbd to 24 | |
| Flanges and their joints \x96 Circular flanges for pipes, valves, fittings and accessories, Class designated \x96 Part 3: Copper alloy flanges | |
| Flanges and their joints \x96 Circular flanges for pipes, valves, fittings and accessories, class designated \x96 Part 4: Aluminium alloy flanges | |
| Fleksible membraner til vandt\xe6tning \x96 Milj\xf8varedeklarat ioner (EPD) \x96 Produktkategoriregle r for fleksible membraner til vandt\xe6tning i plast, gummi og armeret bitumen \x96 Del 2: Vugge til port med optioner,... | |
| Flexible sheets for waterproofing \x96 Determination of the resistance to wind load of roof build-up system with bonded waterproofing systems | |
| Flexible sheets for waterproofing \x96 Environmental product declarations \x96 Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing \x96 Part 1: Cradle to grave and... | |
| Flexible sheets for waterproofing \x96 Solar Reflectance Index | |
| Foodstuffs \x96 Detection of food allergens by liquid chromatography \x96 mass spectrometry (LC-MS) methods \x96 General considerations | |
| Foodstuffs \x96 Determination elements and their chemical species \x96 Determination of organomercury in seafood by elemental mercury analysis | |
| Foodstuffs \x96 Determination of aflatoxins in spices other than paprika by IAC clean-up and HPLC-FLD with post-column derivatization | |
| Foodstuffs \x96 Determination of Alternaria toxins in tomato, wheat and sunflower seeds by SPE clean-up and HPLC-MS/MS | |
| Foodstuffs \x96 Determination of citrinin in food by liquid chromatography tandem mass spectrometry (LC-MS/MS) | |
| Foodstuffs \x96 Determination of elements and their chemical species \x96 Determination of aluminium by inductively coupled plasma mass spectrometry (ICP-MS) | |
| Foodstuffs \x96 Determination of elements and their chemical species \x96 Determination of aluminium by inductively coupled plasma optical emission spectometry (ICP-OES) | |
| Foodstuffs \x96 Determination of ergot alkaloids in cereals and cereal products by dSPE clean-up and HPLC-MS/MS | |
| Foodstuffs \x96 Determination of ochratoxin A in pork meat and derived products by IAC clean-up and HPLC-FLD | |
| Foodstuffs \x96 Determination of ochratoxin A in spices, liquorice, cocoa and cocoa products by IAC clean-up and HPLC-FLD | |
| Foodstuffs \x96 Determination of phomopsin A in lupin seeds and lupin derived products by HPLC-MS/MS | |
| Foodstuffs \x96 Determination of zearalenone and trichothecenes including deoxynivalenol and its acetylated derivatives (3-acetyl-deoxynival enol and 15-acetyl-deoxynival enol), nivalenol T-2 toxin and HT-2 toxin in cereals and cereal products by... | |
| Foodstuffs \x96 Minimum performance requirements for determination of gluten by ELISA | |
| Foodstuffs \x96 Multimethod for the determination of aflatoxins, deoxynivalenol, fumonisins, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone by LC-MS/MS | |
| Foodstuffs \x96 Multimethod for the screening of aflatoxin B1, deoxynivalenol, fumonisin B1 and B2, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone in foodstuffs, excluding foods for infants and young... | |
| Fugitive and diffuse emissions of common concern to industry sectors \x96 Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere | |
| Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions | |
| Furniture - Seating - Test methods for the determination of strength and durability | |
| Furniture - Tables - Test methods for the determination of stability, strength and durability | |
| Furniture \x96 Chairs and tables for educational institutions \x96 Part 1: Functional dimensions | |
| Furniture \x96 Chairs and tables for educational institutions \x96 Part 2: Safety requirements and test methods | |
| Gas infrastructure \x96 Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) \x96 Functional requirements | |
| Gas meter \x96 Thermal-mass flow-meter based gas meter | |
| Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use \x96 Safety and energy efficiency | |
| Gaseous hydrogen \x96 Cylinders and tubes for stationary storage | |
| General principles for manufacturing, filling and holding e-liquids for prefilled containers or products | |
| Geosynthetics \x96 Determination of tensile properties of Polymeric Geosynthetic Barriers | |
| Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties | |
| Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard | |
| Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties | |
| Glass in building \x96 Assessment of release of dangerous substances \x96 Determination of emissions into indoor air from glass products | |
| Glass in building \x96 Environmental product declaration \x96 Product category rules for flat glass products | |
| Glass in building \x96 Shatter properties \x96 Requirements and assessment methods | |
| Glass in building \x96 Special basic products \x96 Borosilicate glasses \x96 Part 1-2: Evaluation of conformity/Product standard | |
| Glass in building \x96 Special basic products \x96 Part 2-2: Glass ceramics \x96 Evaluation of conformity/Product standard | |
| Glass packaging \x96 Crown cap \x96 26 mm diameter, 6 mm height crown cap | |
| Glued-in rods in glued structural timber products \x96 Testing, requirements and bond shear strength classification | |
| Gymnastic equipment \x96 Individual and multifunctional vaulting boxes \x96 Safety requirements and test methods | |
| Health informatics \x96 The International Patient Summary | |
| Hearing protectors \x96 Guidance on selection of individual fit testing methods | |
| Helium cryostats \x96 Protection against excessive pressure | |
| Hydrogen fuel \x96 Product specification and quality assurance \x96 Proton exchange membrane (PEM) fuel cell applications for road vehicles | |
| Hydrometry \x96 Measurement requirements and classification of rainfall intensity measuring instruments | |
| Hydrometry \x96 Minimum performance requirements and test procedures for water monitoring equipment \x96 Devices for the determination of flow \x96 Part 1: Open channel instrumentation | |
| Hydrometry \x96 Minimum performance requirements and test procedures for water monitoring equipment \x96 Devices for the determination of flow \x96 Part 2: Closed conduit instrumentation | |
| Identification of vehicles and infrastructures compatibility \x96 Graphical expression for consumer information on EV power supply | |
| Industrial Trucks \x96 Safety requirements and verification \x96 Supplementary requirements for operation in potentially explosive atmospheres | |
| Industrial trucks \x96 Specifications and test methods \x96 Operator restraint systems other than lap-type seat belts | |
| Information technology \x96 Automatic identification and data capture techniques \x96 Electronic identification plate | |
| Information technology \x96 Fishery and aquaculture products \x96 Requirements for labelling of distribution units and pallets in the trade of fishery and aquaculture products | |
| Information technology \x96 RFID in rail | |
| Inland navigation vessels \x96 Outboard ladders | |
| Inland navigation vessels \x96 Safety rota and safety plans for passenger vessels | |
| Inland navigation vessels \x96 Stanchions and holders for tiltable and detachable railings | |
| Installation of post-tensioning kits for prestressing of structures \x96 Part 1: Competence of personnel | |
| Installation of post-tensioning kits for prestressing of structures \x96 Part 2: Assessment of personnel | |
| Insulated means of transport for temperature sensitive goods \x96 Requirements and testing \x96 Part 1: Container | |
| Intelligent transport systems \x96 ESafety \x96 ECall end to end conformance testing for IMS packet switched based systems | |
| Intelligent transport systems \x96 eSafety \x96 eCall High level application protocols (HLAP) using IP Multimedia Subsystem (IMS) over packet switched networks | |
| Intelligent transport systems \x96 ESafety \x96 eCall OAD for multiple Optional Additional Datasets | |
| Intelligent transport systems \x96 eSafety \x96 Part 5: eCall for UNECE category L1 and L3 powered two-wheel vehicles | |
| Laminate floor coverings \x96 Determination of impact resistance with small ball | |
| Leather \x96 Description, labelling and marking of leather goods | |
| Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use \x96 Personal light electric vehicles (PLEV) \x96 Requirements and... | |
| Liquid petroleum products \x96 Determination of distillation characteristics at atmospheric pressure \x96 Micro-distillation | |
| Liquid petroleum products \x96 Determination of indicated cetane number (ICN) of middle distillate fuels \x96 Primary reference fuels calibration method using a constant volume combustion chamber | |
| Liquid petroleum products \x96 Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy | |
| LPG equipment and accessories \x96 Composite piping for use with LPG in liquid phase and vapour pressure phase \x96 Design and manufacture | |
| Lubricants \x96 Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution \x96 Test method based on CO2-production | |
| Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers | |
| Magnesium and magnesium alloys \x96 Magnesium alloy ingots and castings | |
| Maintenance \x96 Maintenance engineering \x96 Requirements | |
| Maintenance \x96 Maintenance within physical asset management \x96 Framework for improving the value of the physical assets through their whole life cycle | |
| Masonry and masonry products \x96 Methods for determining thermal properties | |
| Materials obtained from End-of-Life Tyres (ELT) \x96 Determination of the true density of granulates and powders \x96 Method based on water pycnometry | |
| Materials obtained from End-of-Life Tyres (ELT) \x96 Sampling method for granulates and powders stored in big-bags and small-bags | |
| Materials produced from end of life tyres \x96 Steel wire \x96 Determination of the non-metallic content | |
| Modular mechanical locked floor coverings (MMF) \x96 Determination of geometrical characteristics | |
| Modular multilayer floor coverings \x96 Elements with a wood powder based surface layer \x96 Specifications, requirements and test methods | |
| Mountaineering equipment \x96 Individual safety systems for rope courses \x96 Safety requirements and test methods | |
| Mountaineering equipment \x96 Personal belay lanyards \x96 Safety requirements and test methods | |
| Natural gas vehicles \x96 Vehicle fuelling appliances | |
| Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis | |
| Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels | |
| Non-destructive examination of welds - Ultrasonic examination of welded joints | |
| Non-destructive testing \x96 Acoustic emission testing \x96 In-service acoustic emission monitoring of metallic pressure equipment and structures \x96 General requirements | |
| Non-destructive testing \x96 Thermographic testing \x96 Active thermography with laser excitation | |
| Non-destructive testing \x96 Thermographic testing \x96 Active thermography | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique | |
| Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels | |
| Non-destructive testing of welds - Ultrasonic testing of welded joints | |
| Outdoor candles \x96 Product safety labels | |
| Outdoor candles \x96 Specification for fire safety | |
| Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols | |
| Packaged refrigerating units for walk-in cold rooms \x96 Classification, performance and energy consumption testing | |
| Packaging \x96 Determination of the degree of disintegration under simulated home composting conditions | |
| Packaging \x96 Flexible aluminium tubes \x96 Tube nozzles | |
| Packaging \x96 Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations | |
| Packaging \x96 Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers | |
| Paper and board \x96 Determination of composition of paper and board for recycling by gravimetric analysis | |
| Paper and board \x96 Sampling procedures for paper and board for recycling | |
| Patient involvement in health care \x96 Minimum requirements for person-centred care | |
| Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) | |
| Permanent anchor devices and safety hooks | |
| Personal eye protection \x96 Mesh eye and face protectors | |
| Personal eye protection \x96 Sunglare filters for industrial use | |
| Personal eye-protection \x96 Infrared filters \x96 Transmittance requirements and recommended use | |
| Personal eye-protection \x96 Ski goggles for downhill skiing | |
| Personal protection \x96 Equipment for eye and face protection during welding and allied processes | |
| Photocatalysis \x96 Water purification \x96 Performance of photocatalytic materials by measurement of phenol degradation | |
| Plant biostimulants \x96 Claims \x96 Part 1: General principles | |
| Plant biostimulants \x96 Claims \x96 Part 2: Nutrient use efficiency resulting from the use of a plant biostimulant | |
| Plant biostimulants \x96 Claims \x96 Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant | |
| Plant biostimulants \x96 Claims \x96 Part 4: Determination of quality traits resulting from the use of a plant biostimulant | |
| Plant biostimulants \x96 Claims \x96 Part 5: Determination of availability of confined nutrients in the soil or rhizosphere | |
| Plant biostimulants \x96 Detection of Listeria monocytogenes | |
| Plant biostimulants \x96 Detection of Staphylococcus aureus | |
| Plant biostimulants \x96 Detection of Vibrio spp. | |
| Plant biostimulants \x96 Determination of Azospirillum spp. | |
| Plant biostimulants \x96 Determination of Azotobacter spp. | |
| Plant biostimulants \x96 Determination of chromium(VI) | |
| Plant biostimulants \x96 Determination of dry matter | |
| Plant biostimulants \x96 Determination of inorganic arsenic | |
| Plant biostimulants \x96 Determination of microorganisms' concentration | |
| Plant biostimulants \x96 Determination of phosphonates | |
| Plant biostimulants \x96 Determination of specific elements \x96 Part 1: Digestion by aqua regia for subsequent determination of elements | |
| Plant biostimulants \x96 Determination of specific elements \x96 Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn | |
| Plant biostimulants \x96 Determination of specific elements \x96 Part 3: Determination of mercury | |
| Plant biostimulants \x96 Determination of the yeast and mould content | |
| Plant biostimulants \x96 Preparation of sample for microbial analysis | |
| Plant biostimulants \x96 Sampling and sample preparation \x96 Part 1: Sampling | |
| Plant biostimulants \x96 Sampling and sample preparation \x96 Part 2: Sample preparation | |
| Plastics \x96 Barrier films for agricultural and horticultural soil disinfection by fumigation \x96 Part 1: Specifications for barrier films | |
| Plastics \x96 Barrier films for agricultural and horticultural soil disinfection by fumigation \x96 Part 2: Method for film permeability determination using a static technique | |
| Plastics \x96 Bio-based polymers, plastics, and plastics products \x96 Terminology, characteristics and communication | |
| Plastics \x96 Controlled loop recycling of PVC-U profiles from windows and doors | |
| Plastics \x96 Environmental Aspects \x96 Vocabulary | |
| Plastics \x96 Plastic films \x96 Determination of tear resistance using a trapezoidal test specimen with incision | |
| Plastics \x96 Poly(vinyl chloride) (PVC) based profiles \x96 Determination of the peel strength of profiles laminated with foils | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x96 Terminology of PVC based materials | |
| Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee | |
| Plastics piping systems \x96 Thermoplastics valves \x96 Test method for the integrity of a valve after an external blow | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Boxes used for infiltration, attenuation and storage systems \x96 Part 1: Specifications for storm water boxes made... | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Test method for determination of long-term compression strength of boxes | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x96 Test method for determination of short-term compression strength of boxes | |
| Plastics piping systems for non-pressure underground conveyance of surface water \x96 Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 2: Specification for road gullies | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure \x96 Oriented unplasticized poly(vinyl chloride) (PVC-O) \x96 Part 1: General | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure \x96 Oriented unplasticized poly(vinyl chloride) (PVC-O) \x96 Part 2: Pipes | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure \x96 Oriented unplasticized poly(vinyl chloride) (PVC-O) \x96 Part 5: Fitness for purpose... | |
| Plating and anodizing lines \x96 Safety requirements | |
| Portable equipment for projecting extinguishing agents supplied by firefighting pumps \x96 Collecting heads and dividing breechings PN 16 | |
| Power operated pedestrian entrance control equipment \x96 Safety in use \x96 Requirements and test methods | |
| Power operated pedestrian swing door drives with self closing function \x96 Requirements and test methods | |
| Private security services \x96 Protection of critical infrastructure \x96 Part 1: General requirements | |
| Private security services \x96 Protection of critical infrastructure \x96 Part 2: Airport and aviation security services | |
| Private security services \x96 Protection of critical infrastructure \x96 Part 3: Maritime and port security services | |
| Product category rules for ceramic tiles | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion | |
| Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis | |
| Products and systems for the protection and repair of concrete structures \x96 Test methods \x96 Reference concretes for testing | |
| Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow | |
| Protective clothing \x96 Enhanced visibility equipment for medium risk situations \x96 Test methods and requirements | |
| Protective garments for motorcycle riders \x96 Part 1: Test methods | |
| Protective garments for motorcycle riders \x96 Part 2: Class AAA garments \x96 Requirements | |
| Protective garments for motorcycle riders \x96 Part 3: Class AA garments \x96 Requirements | |
| Protective garments for motorcycle riders \x96 Part 4: Class A garments \x96 Requirements | |
| Protective garments for motorcycle riders \x96 Part 5: Class B garments \x96 Requirements | |
| Protective garments for motorcycle riders \x96 Part 6: Class C garments \x96 Requirements | |
| Provision of services \x96 Part 1: Service procurement \x96 Guidance for the assessment of the capacity of service providers and evaluation of service proposals | |
| Provision of services \x96 Part 2: Services contracts \x96 Guidance for the design, content and structure of contracts | |
| Provision of services \x96 Part 3: Management of Performance Measurement \x96 Guidance on the mechanism to measure performance as part of service contracts | |
| Pulp, paper and board \x96 Determination of primary aromatic amines (PAA) in a water extract by a LC-MS method | |
| Pumps \x96 Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units \x96 Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump... | |
| Pumps \x96 Methods of qualification of the Energy Efficiency Index for rotodynamic pump units \x96 Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units... | |
| Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies | |
| Railway applications - Infrastructure - Resilient element for floating slab system | |
| Railway applications \x96 Acoustics \x96 Measuring of door audible warnings | |
| Railway applications \x96 Adhesive bonding of rail vehicles and their components | |
| Railway applications \x96 Braking \x96 Passenger coach test procedure | |
| Railway applications \x96 Communication device for urban rail \x96 System requirements | |
| Railway applications \x96 Fire protection on railway vehicles \x96 Toxicity test of materials and components | |
| Railway applications \x96 General terms and definitions | |
| Railway applications \x96 Infrastructure \x96 Performance requirements of rail fastening systems for tramways | |
| Railway applications \x96 Infrastructure \x96 Track alignment design parameters \x96 Urban rail | |
| Railway applications \x96 Infrastructure \x96 Under ballast mats | |
| Railway applications \x96 Interior glazing for rail vehicles | |
| Railway applications \x96 Platform barrier systems | |
| Railway applications \x96 Rail defects \x96 Part 1: Rail defect management | |
| Railway applications \x96 Rolling stock maintenance \x96 Maintenance records | |
| Railway applications \x96 Strength assessment of rail vehicle structures \x96 Part 1: General | |
| Railway applications \x96 Strength assessment of rail vehicle structures \x96 Part 2: Static strength assessment | |
| Railway applications \x96 Strength assessment of rail vehicle structures \x96 Part 3: Fatigue strength assessment based on cumulative damage | |
| Railway applications \x96 Systems and procedures for change of track gauge \x96 Part 1: Automatic Variable Gauge Systems | |
| Refrigerating systems and heat pumps \x96 Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes \x96 Requirements, design and installation | |
| Reporting in support of supervision of online gambling services by the gambling regulatory authorities of the Member States | |
| Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres | |
| Resilient floor coverings \x96 Quartz vinyl tiles \x96 Specification | |
| Resilient, textile, laminate and modular mechanical locked floor coverings \x96 Light reflectance value (LRV) of a flooring surface | |
| Road operation machinery \x96 Safety \x96 Part 1: General requirements | |
| Road operation machinery \x96 Safety \x96 Part 2: Specific requirements for road surface cleaning machines | |
| Road operation machinery \x96 Safety \x96 Part 3-1: Winter service machines \x96 Requirements for snow clearing machines with rotating tools and snow ploughs | |
| Road operation machinery \x96 Safety \x96 Part 3-2: Winter service machines \x96 Specific requirements for spreading machines | |
| Road operation machinery \x96 Safety \x96 Part 4: Road service area maintenance machines \x96 Requirements for grass and brush cutting machines | |
| Road traffic noise reducing devices \x96 Sustainability: Key Performance Indicators (KPIs) Declaration | |
| Road vehicles \x96 Machines for mounting and demounting vehicle tyres \x96 Safety requirements | |
| Road vehicles \x96 Portable Emission Measuring Systems (PEMS) \x96 Performance assessment | |
| Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1: Requirements for rubber and plastics tubing... | |
| Rubber hose assemblies for oil suction and discharge services \x96 Specification for the assemblies | |
| Rubber hoses and hose assemblies for fuel truck delivery - Specification | |
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) \x96 Specification | |
| Rubber- or plastics-coated fabrics - Determination of flexibility | |
| Rubber- or plastics-coated fabrics - Determination of resistance to water penetration - Low-pressure method | |
| Rubber- or plastics-coated fabrics \x96 Mechanical test methods under biaxial stress states \x96 Part 2: Determination of the pattern compensation values | |
| Safety of Industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N -... | |
| Safety of industrial trucks \x96 Pedestrian controlled manual and semi-manual trucks \x96 Part 3: Platform trucks | |
| Safety of industrial trucks \x96 Pedestrian propelled industrial platform trucks | |
| Safety of machinery - Guidance for the drafting of the noise clauses of safety standards | |
| Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors | |
| Safety of machinery \x96 Cableway installations designed for the transport of material and specially designated persons \x96 General safety requirements | |
| Safety of machinery \x96 Safety requirements to finishing lines for metal strip | |
| Safety requirements \x96 Vehicle cleaning equipment | |
| Safety requirements for cableway installations designed to carry persons \x96 Precommissioning inspection, maintenance, operational inspection and checks | |
| Safety requirements for cableway installations designed to carry persons \x96 Prevention and fight against fire | |
| SCM \x96 Scheduling and Commanding Message \x96 Standard | |
| Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval | |
| Secure storage units \x96 Classification for high security locks according to their resistance to unauthorized opening \x96 Distributed systems | |
| Side curtain ventilation systems \x96 Safety | |
| Soil and waste characterization \x96 Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900) | |
| Soil, sludge, treated biowaste and waste \x96 Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) | |
| Specifications for dedicated liquefied petroleum gas appliances \x96 LPG vapour pressure appliances incorporating a horizontal cartridge in the chassis | |
| Specifications for industrial laundry machines \x96 Definitions and testing of capacity and consumption characteristics \x96 Part 2: Batch drying tumblers | |
| Specifications for industrial laundry machines \x96 Definitions and testing of capacity and consumption characteristics \x96 Part 3: Continuous tunnel washer | |
| Specifications for industrial laundry machines \x96 Definitions and testing of capacity and consumption characteristics \x96 Part 4: Washer-extractors | |
| Stationary source emissions \x96 Bioaerosols and biological agents \x96 Sampling of bioaerosols and collection in liquids \x96 Impingement method | |
| Stationary source emissions \x96 Data acquisition and handling systems \x96 Part 1: Specification of requirements for the handling and reporting of data | |
| Stationary source emissions \x96 Data acquisition and handling systems \x96 Part 2: Specification of requirements on data acquisition and handling systems | |
| Stationary source emissions \x96 Data acquisition and handling systems \x96 Part 3: Specification of requirements for the performance test of data acquisition and handling systems | |
| Stationary source emissions \x96 Data acquisition and handling systems \x96 Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling... | |
| Stationary source emissions \x96 Quality assurance and quality control procedures for automated dust arrestment plant monitors | |
| Stationary source emissions \x96 Requirements on proficiency testing schemes for emission measurements | |
| Surfaces for sports areas \x96 Code of practice for the sampling of performance infills used within synthetic turf surfaces | |
| Surfaces for sports areas \x96 Determination of dimensional stability of shock pads used within sports systems | |
| Surfaces for sports areas \x96 Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH) | |
| Surfaces for sports areas \x96 Test method for the determination of the residual deformation of synthetic or organic infill granules after static load | |
| Surfaces for sports areas \x96 Test method for the determination of the resistance to dynamic fatigue of shock pads and sports surfaces | |
| Sustainability of construction works \x96 Environmental product declarations \x96 Horizontal rules for business-to-consumer communication | |
| Sustainability of construction works \x96 Evaluation of the potential for sustainable refurbishment of buildings | |
| Sustainability of construction works \x96 Sustainability assessment of civil engineering works \x96 Calculation methods | |
| Tail lifts \x96 Platform lifts for mounting on wheeled vehicles \x96 Safety requirements \x96 Part 1: Tail lifts for goods | |
| Tail lifts \x96 Platform lifts for mounting on wheeled vehicles \x96 Safety requirements \x96 Part 2: Tail lifts for passengers | |
| Tanks for transport of dangerous goods \x96 Service equipment for tanks \x96 Vapour manifold vent valve | |
| Tattooing \x96 Safe and hygienic practice | |
| Temporary works equipment \x96 Execution \x96 Requirements for manufacturing | |
| Test method \x96 Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus | |
| Tests for chemical properties of aggregates - Part 1: Chemical analysis | |
| Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates | |
| Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts | |
| Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement | |
| Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) | |
| Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates | |
| Tests for chemical properties of aggregates \x96 Part 4: Determination of water susceptibility of fillers for bituminous mixtures | |
| Textiles \x96 Determination of the content of compounds based on chlorobenzenes and chlorotoluenes | |
| Textiles \x96 Physiological effects \x96 Measurement of liquid sweat transport and buffering | |
| Textiles and textile products \x96 Determination of biocide additives \x96 Part 1: 2-Phenylphenol and triclosan, method using liquid chromatography | |
| Textiles and textile products \x96 Determination of biocide additives \x96 Part 2: Chlorophenol-based preservatives, method using gas chromatography | |
| Textiles and textile products \x96 Determination of certain preservatives, method using liquid chromatography | |
| Textiles and textile products \x96 Determination of certain residual solvents \x96 Part 2: Determination of benzene, method using headspace gas chromatography | |
| Textiles and textile products \x96 Determination of dimethylformamide (DMF), method using gas chromatography | |
| Textiles and textile products \x96 Determination of dimethylfumarate (DMFu), method using gas chromatography | |
| Textiles and textile products \x96 Determination of Polycyclic Aromatic Hydrocarbons (PAH), method using gas chromatography | |
| Textiles and textile products \x96 Organic fluorine \x96 Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography | |
| Textiles and textile products \x96 Organic fluorine \x96 Part 2: Determination of volatile compounds by extraction method using gas chromatography | |
| Textiles and textile products \x96 Part 2: Safety of children's clothing \x96 Security of attachment of buttons \x96 Test method | |
| Thermal insulation products for buildings \x96 Factory-made vacuum insulation panels (VIP) \x96 Specification | |
| Thermal insulation products for buildings \x96 Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS) | |
| Thermal spraying \x96 Tubular coating tensile test | |
| Tower cranes \x96 Anti-collision systems \x96 Safety requirements | |
| Transport Services \x96 Customer communications for passenger transport services \x96 A Universal Design approach | |
| Transportable gas cylinders \x96 Fully wrapped carbon composite cylinders and tubes for hydrogen | |
| Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures \x96 Testing, requirements and repair strength verification | |
| Valuation of Energy Related Investments (VALERI) | |
| Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves | |
| Ventilation for buildings \x96 Ductwork \x96 Non-metallic ductwork \x96 Requirements and test methods | |
| Visual assessment of furniture surfaces | |
| Waste \x96 Characterization of granular solids with potential for use as construction material \x96 Compliance leaching test \x96 Up-flow percolation test | |
| Waste management \x96 Access control to collection containers \x96 Identification and authorization | |
| Waste Management \x96 Data communication between communication management system and the back office system for stationary waste collection containers \x96 Functional specification and the semantic data model | |
| Water play equipment and features \x96 Safety requirements, test methods and operational requirements | |
| Water quality \x96 General requirements and performance test procedures for water monitoring equipment \x96 Measuring devices | |
| Water quality \x96 Guidance for assessing the efficiency and related metrics of fish passage solutions using telemetry | |
| Water quality \x96 Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters | |
| Water quality \x96 Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters | |
| Water quality \x96 Guidance on mapping of seagrasses and macroalgae in the eulittoral zone | |
| Water quality \x96 Guidance on sampling of mesozooplankton from marine and brackish water using mesh | |
| Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components | |
| Welding - Basic welded joint details in steel - Part 1: Pressurized components | |
| Welding \x96 Basic weld joint details in steel \x96 Part 2: Non internal pressurized components | |
| Windows and doors \x96 Environmental Product Declarations \x96 Product category rules for windows and pedestrian doorsets | |
| Winter service equipment \x96 Brine production systems \x96 Requirements and test methods | |
| Wood flooring and parquet \x96 Determination of top layer delamination of multilayer elements \x96 Test method | |
| Workplace exposure \x96 Assessment of exposure by inhalation of nano-objects and their aggregates and agglomerates | |
| Workplace exposure \x96 Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles \x96 Part 1: Requirements and choice of test methods | |
| Workplace exposure \x96 Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles \x96 Part 2: Rotating drum method | |
| Workplace exposure \x96 Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles \x96 Part 3: Continuous drop method | |
| Workplace exposure \x96 Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles \x96 Part 4: Small rotating drum method | |
| Workplace exposure \x96 Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles \x96 Part 5: Vortex shaker method |
| << Prev | Next >> |