Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
340
350
360
370
380
390
394
395
396
397
398
399
400
401
402
403
404
405
406
410
420
430
440
450
460
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Sound-scattering properties of surfaces - Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room | |
| Acoustics - Sound-scattering properties of surfaces Part 2: Measurement of the directional diffusion coefficient in a free field | |
| Acoustics \x97 Software for the calculation of sound outdoors Part 1: Quality requirements and quality assurance | |
| Aerospace - Linear hydraulic utility actuator - General specifications | |
| Aerospace series \x97 AC induction electric motor driven, variable delivery, hydraulic pumps \x97 General requirements | |
| Agricultural and forestry tractors and implements - Hydraulic power beyond | |
| Agricultural Trailers - Balanced and Semi-Mounted Trailers - Determination of Payload, Vertical Static Load and Axle Load | |
| Aircraft - Ground-service connections - Potable water, toilet-flush water and toilet drain | |
| Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications | |
| Aluminium oxide used for the production of primary aluminium \x97 Determination of attrition index \x97 | |
| Anaesthetic and respiratory equipment \x97 General requirements for airways and related equipment | |
| Analytical colorimetry Part 1: Practical colour measurement | |
| Analytical colorimetry Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power | |
| Analytical colorimetry Part 3: Special indices | |
| Analytical colorimetry Part 4: Metamerism index for pairs of samples for change of illuminant | |
| Analytical colorimetry Part 5: Procedure for colorimetric determination of colour differences of object colours according to equidistant colour spaces | |
| Anhydrous milk fat - Determination of sterol composition by gas liquid chromatography (Routine method) | |
| Animal and vegetable fats and oils - Determination of aliphatic hydrocarbons in vegetable oils | |
| Animal and vegetable fats and oils \x97 Determination of conventional mass per volume (litre weight in air) \x97 Oscillating U-tube method | |
| Animal and vegetable fats and oils \x97 Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol | |
| Animal and vegetable fats and oils \x97 Determination of fattyacid- bound chloropropanediols (MCPDs) and glycidol by GC/MS Part 1: Method using fast alkaline transesterification and measurement for 3- MCPD and... | |
| Assistive products for personal hygiene that support users \x97 Requirements and test methods | |
| Belt drives \x97 V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts \x97 Electrical conductivity of antistatic belts: Characteristics and methods of test | |
| Biodiversity \x97 Process for designing and implementing biodiversity net gain in development projects | |
| Biotechnology - Biobanking of parasites Part 1: Helminths | |
| Biotechnology \x97 Biobanking \x97 Requirements for human neural stem cells derived from pluripotent stem cells | |
| Brazing \x97 Specification and qualification of brazing procedures for metallic materials | |
| Building Construction - Tolerances - Expression of Dimensional Accuracy - Principles and Terminology | |
| Building construction machinery and equipment \x97 Concrete placing systems for stationary equipment Part 1: Terminology and commercial specifications | |
| Carbon-fibre-reinfor ced plastics - Determination of compression-after-im pact properties at a specified impact-energy level | |
| Carbonaceous materials for the production of primary aluminium \x97 Baked carbon bodies \x97 Determination of the dynamic elasticity modulus by the resonance method | |
| Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Determination of rammability of unbaked pastes | |
| Carbonaceous materials used in the production of aluminium \x97 Determination of baking level expressed by equivalent temperature | |
| Cardiovascular implants and artificial organs - Cannulae for extracorporeal circulation | |
| Cardiovascular implants and artificial organs \x97 Cannulae for extracorporeal circulation | |
| Cardiovascular implants and extracorporeal systems - Cardiopulmonary bypass systems - Venous bubble traps | |
| Cardiovascular implants and extracorporeal systems - Centrifugal blood pumps | |
| Cardiovascular implants and extracorporeal systems \x97 Cardiopulmonary bypass systems \x97 Venous bubble traps | |
| Ceramic tiling systems - Sustainability for ceramic tiles and installation materials Part 2: Specification for tile installation materials | |
| Ceramic tiling systems \x97 Sustainability for ceramic tiles and installation materials Part 1: Specification for ceramic tiles | |
| Cereals, pulses and cereal products - Sampling - Simplified routine method | |
| Cinematography - Camera Usage of 8mm Type S Motion-Picture Film - Specifications | |
| Cinematography - Printed 8mm, Type S, Image Area on 16mm Motion-Picture Film Perforated 8mm, Type S (1-4) - Position and Dimensions | |
| Cinematography - Projector Usage of 8 mm Type S Motion-Picture Film for Direct Front Projection | |
| Cinematography \x97 Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) \x97 Dimensions | |
| Clinical laboratory testing and in vitro medical devices - Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy | |
| Clothing - Digital fittings - Vocabulary and terminology used for the virtual garment | |
| Condition monitoring and diagnostics of machine systems - Thermography Part 2: Image interpretation and diagnostics | |
| Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel Part 3: Requirements for training bodies and the training process | |
| Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel Part 4: Field lubricant analysis | |
| Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel Part 5: Lubricant laboratory technician/analyst | |
| Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel Part 6: Acoustic emission | |
| Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel Part 7: Thermography | |
| Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel Part 8: Ultrasound | |
| Condition monitoring and diagnostics of machines - Thermography - Part 1: General procedures | |
| Condition monitoring and diagnostics of machines \x97 Approaches for performance diagnosis | |
| Condition monitoring and diagnostics of machines Requirements for training and certification of personnel Part 1: Requirements for certifying bodies and the certification process | |
| Condition monitoring and diagnostics of machines Requirements for training and certification of personnel Part 2: Vibration condition monitoring and diagnostics | |
| Condition monitoring and diagnostics of power transformers | |
| Cork - Cork stoppers for still wine - Sampling plan for the quality control of cork stoppers | |
| Corrosion of metals and alloys - Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement | |
| Corrosion of metals and alloys - Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion | |
| Corrosion of metals and alloys \x97 Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel | |
| Corrosion of metals and alloys \x97 Determination of AC corrosion \x97 Protection criteria | |
| Corrosion of metals and alloys \x97 Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control | |
| Corrosion of metals and alloys \x97 Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids | |
| Corrosion of metals and alloys Determination of the critical pitting temperature under potientiostatic control | |
| Cosmetics - Microbiology - Detection of Candida albicans | |
| Cosmetics - Microbiology - Detection of specified and non-specified microorganisms | |
| Cotton fibres \x97 Test method for sugar content \x97 Spectrophotometry | |
| Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry - Part 1: Isocyanates using dibutylamine derivatives | |
| Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry - Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives | |
| Dimethyl ether (DME) for fuels - Determination of high temperature (105\xb0C) evaporation residues - Mass analysis method | |
| Dry-cured ham - Specification | |
| Earth-moving machinery and mining \x97 Autonomous and semi-autonomous machine system safety | |
| Electrically propelled mopeds and motorcycles \x97 Safety requirements for conductive connection to an external electric power supply | |
| Electrically propelled vehicles \x97 Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor | |
| Electronic fee collection - Systems architecture for vehicle-related tolling | |
| Endoscopes - Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves | |
| Energy performance of buildings \x97 Indoor environmental quality Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings | |
| Energy performance of fenestration systems for residential buildings - Calculation procedure | |
| Energy savings - Definition of a methodological framework applicable to calculation and reporting on energy savings | |
| Environmental tobacco smoke - Determination of vapour phase nicotine and 3-ethenylpyridine in air - Gas-chromatographic method | |
| Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol | |
| Essential oils \x97 Determination of peroxide value | |
| Essential technical requirements for mechanical components and metallic structures foreseen for Generation IV nuclear reactors | |
| Facility smart grid information model | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of boron nitride powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of tests for reinforcements - Determination of the tensile properties of ceramic filaments at elevated temperature in air using the hot... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance | |
| Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) \x97 Determination of antiviral activity of semiconducting photocatalytic materials \x97 Test method using bacteriophage Q-beta | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment \x97 Test method using bacteriophage Q-beta | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Determination of drying loss of ceramic granules | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Measurement method of piezoelectric strain at high electric field | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Measurement method of spectral transmittance of fine ceramics thin films under humid condition | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Methods for chemical analysis of fine silicon nitride powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Test method for thermal fatigue of fine ceramics substrate | |
| Flour from whe (Triticum aestivum L.) - Amperometric method for starch damage measurement | |
| Founding - Ausferritic spheroidal graphite cast irons - Classification | |
| Freight containers - Electronic seals - Part 1: Communication protocol | |
| Freight containers - Electronic seals - Part 3: Environmental characteristics | |
| Freight containers - Electronic seals - Part 4: Data protection | |
| Freight containers - Electronic seals - Part 5: Physical layer | |
| Freight containers - Mechanical seals | |
| Freight containers - RFID cargo shipment tag system | |
| Freight containers \x97 Electronic seals \x97 Part 2: Application requirements | |
| Gas cylinders - Refillable welded stainless steel cylinders - Part 1: Test pressure 6 MPa and below | |
| Gas cylinders - Refillable welded stainless steel cylinders - Part 2: Test pressure greater than 6 MPa | |
| Gasoline engines \x97 Medium pressure liquid fuel supply connections Part 1: 60\xb0 female cone connectors | |
| Gasoline engines \x97 Medium pressure liquid fuel supply connections Part 2: Pipe assemblies | |
| General technical rules for measurement, calculation and verification of energy savings of projects | |
| Geosynthetics \x97 Test method for the determination of water discharge capacity for prefabricated vertical drains | |
| Graphic technology - Colour data exchange format (CxF/X) Part 2: Scanner target data (CxF/X-2) | |
| Graphic technology \x97 Colour data exchange format (CxF/X) Part 3: Output target data (CxF/X-3) | |
| Graphic technology \x97 Colour data exchange format (CxF/X) Part 4: Spot colour characterisation data (CxF/X-4) | |
| Graphic technology \x97 Colour data exchange format Part 1: Relationship to CxF3 (CxF/X) | |
| Graphical symbols - Vocabulary | |
| Hard coal and coke Manual sampling | |
| Health Informatics - Messages and communication - Format of length limited globally unique string identifiers | |
| Health informatics - Requirements for an electronic health record architecture | |
| Heavy commercial vehicles and buses \x97 Test method for yaw stability \x97 Sine with dwell test | |
| Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics | |
| Hydraulic fluid power \x97 Method for evaluating water separation performance of dehydrators | |
| Hydraulic fluid power Cleanliness of parts and components Inspection document and principles related to contaminant collection, analysis and data reporting | |
| Hydrometry \x97 Measurement of liquid flow in open channels \x97 Determination of the stage\x96discharge relationship | |
| Impact test procedures for road vehicles - Seating and positioning procedures for anthropomorphic test devices - Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions... | |
| Impact test procedures for road vehicles \x97 Seating and positioning procedures for anthropomorphic test devices \x97 Procedure for the WorldSID 50th percentile male side-impact dummy in front outboard seating positions... | |
| Implants for surgery - Wear of total intervertebral spinal disc prostheses Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test | |
| Implants for surgery - Wear of total intervertebral spinal disc prostheses Part 2: Nucleus replacements | |
| Implants for surgery \x97 Wear of total intervertebral spinal disc prostheses Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test | |
| Implants for surgery \x97 Wear of total intervertebral spinal disc prostheses Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions | |
| In vitro diagnostic test systems \x97 Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens \x97 Laboratory quality practice guide | |
| Indexable inserts for cutting tools Designation | |
| Industrial automation systems and integration - COLLADA\x99 digital asset schema specification for 3D visualization of industrial data | |
| Industrial automation systems and integration - COLLADATM digital asset schema specification for 3D visualization of industrial data | |
| Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration Part 2: Descriptions and definitions of application domain matrix elements | |
| Industrial automation systems and integration \x97 Diagnostics, capability assessment and maintenance applications integration Part 3: Applications integration description method | |
| Information and documentation - Records risks - Risk assessment for records management | |
| Intelligent transport systems (ITS) - Location referencing for geographic databases Part 1: General requirements and conceptual model | |
| Intelligent transport systems (ITS) - Location referencing for geographic databases Part 2: Pre-coded location references (pre-coded profile) | |
| Intelligent transport systems (ITS) - Location referencing for geographic databases Part 3: Dynamic location references (dynamic profile) | |
| Intelligent transport systems (ITS) \x97 Location referencing for geographic databases Part 4: Precise relative location references (precise relative profile) | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 Evolved Universal Terrestrial Radio Access Network (EUTRAN) Part 1: General usage | |
| Intelligent transport systems \x97 Evolved universal terrestrial radio access network (E-UTRAN) Part 2: Device to device communications (D2D) | |
| Iodine charcoal sorbents for nuclear facilities - Method for defining sorption capacity index | |
| Iron ores \x97 Determination of arsenic content \x97 Hydride generation atomic absorption spectrometric method | |
| Jewellery and precious metals \x97 Determination of high purity gold, silver, platinum and palladium \x97 Difference method using SPARK-OES | |
| Leaf springs \x97 Technical specifications | |
| Leather \x97 Pickled sheep pelts \x97 Guidelines for grading on the basis of defect and size | |
| Lifting hooks Nomenclature | |
| Low-alloyed steel - Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn - Inductively coupled plasma optical emission spectrometric method | |
| Machine tools - Test conditions for universal spindle heads Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis) | |
| Machine-made textile floor coverings \x97 Determination of dimensional changes after exposure to heat and/or water | |
| Machinery for forestry \x97 Knuckleboom log loaders \x97 Identification terminology, classification and component nomenclature | |
| Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia | |
| Manufacture of cell-based health care products - Control of microbial risks during processing | |
| Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation Part 2: External effective dose of the caregivers after release from the hospital... | |
| Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method | |
| Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 3: Cantilever shear beam method | |
| Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials Part 1: Principles and guidelines | |
| Mechanical vibration and shock - Measurement of vibration power flow from machines into connected support structures Part 1: Direct method | |
| Mechanical vibration and shock - Measurement of vibration power flow from machines into connected support structures Part 2: Indirect method | |
| Mechanical vibration and shock - Signal processing - Part 1: General introduction | |
| Mechanical vibration and shock - Signal processing - Part 4: Shock-response spectrum analysis | |
| Mechanical vibration and shock - Signal processing Part 3: Methods of time-frequency analysis | |
| Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 2: Resonance method | |
| Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 3: Cantilever shear beam method | |
| Mechanical vibration and shock Signal processing Part 2: Time domain windows for Fourier Transform analysis | |
| Medical devices - Connectors for reservoir delivery systems for healthcare applications Part 6: Neural applications | |
| Medical devices \x97 Connectors for reservoir delivery systems for healthcare applications Part 1: General requirements and common test methods | |
| Medical devices \x97 Connectors for reservoir delivery systems for healthcare applications Part 3: Enteral applications | |
| Medical devices \x97 Connectors for reservoir delivery systems for healthcare applications Part 7: Connectors for intravascular infusion | |
| Medical devices \x97 Connectors for reservoir delivery systems for healthcare applications Part 8: Citrate-based anticoagulant solution for apheresis applications | |
| Metallic and other inorganic coatings - Definitions and conventions concerning porosity | |
| Metallic materials \x97 Torsion test at ambient temperature | |
| Meteorological balloons \x97 Specification | |
| Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics | |
| Meteorology \x97 Wind measurements \x97 Part 1: Wind tunnel test methods for rotating anemometer performance | |
| Method for the justification of fire partitioning in water cooled nuclear power plants (NPP) | |
| Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis | |
| Microbiology of food and animal feeding stuffs Carcass sampling for microbiological analysis | |
| Microscopes - Microscopes with digital imaging displays - Information provided to the user regarding imaging performance | |
| Milk - Determination of casein-nitrogen content - Part 1: Indirect method (Reference method) | |
| Milk - Determination of casein-nitrogen content - Part 2: Direct method | |
| Milk and milk products - Determination of furosine content - Ion-pair reverse-phase high-performance liquid chromatography method | |
| Milk, milk products and mesophilic starter cultures - Enumeration of citrate-fermenting lactic acid bacteria - Colony-count technique at 25 \xb0C | |
| Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes \x97 Requirements | |
| Nitrile Rubber - Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value | |
| Non-destructive testing \x97 Acoustic emission testing \x97 Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers | |
| Non-destructive testing \x97 Infrared thermography Part 1: Characteristics of system and equipment | |
| Non-destructive testing \x97 Infrared thermography Part 2: Test method for integrated performance of system and equipment | |
| Non-destructive testing \x97 Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation | |
| Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct - Testing and rating for performance | |
| Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct \x97 Testing and rating for performance | |
| Non-parallel steel wire and cords for tyre reinforcement | |
| Nuclear energy \x97 Guidance to the evaluation of measurement uncertainties of impurity in uranium solution by linear regression analysis | |
| Nuclear fuel technology \x97 Dissolution of plutonium dioxide-containing materials Part 1: Dissolution of plutonium dioxide powders | |
| Nuclear fuel technology \x97 Dissolution of plutonium dioxide-containing materials Part 2: Dissolution of MOX pellets and powders | |
| Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.) - Determination of irone content - Method using gas chromatography on a capillary column | |
| Ophthalmic optics \x97 Contact lens care products \x97 Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms | |
| Ophthalmic optics \x97 Contact lenses and contact lens care products \x97 Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/ solution interactions | |
| Optics and photonics - Holography Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms | |
| Optics and photonics \x97 Holography Part 2: Methods for measurement of hologram recording characteristics | |
| Optics and photonics \x97 Measurement method of semiconductor lasers for sensing | |
| Pallets for materials handling - Quality of new wooden components for flat pallets | |
| Pallets for materials handling. Quality of assembly of new, wooden, flat pallets | |
| Paper, board and pulps - Determination of total magnesium, total calcium, total manganese, total iron and total copper | |
| Paper, board and pulps Determination of acid-soluble manganese | |
| Paper, Board, and Pulps - Determination of Residue (Ash) on Ignition at 525 Degrees Celcius | |
| Particle size analysis \x97 Small-angle X-ray scattering | |
| Passenger car, commercial vehicle, truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyres | |
| Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance | |
| Pesticides and other agrochemicals - Common names | |
| Petroleum and natural gas industries - Downhole equipment - Sand screens | |
| Petroleum and Natural Gas Industries - Offshore Production Installations - Guidelines on Tools and Techniques for Hazard Identification and Risk Assessment | |
| Petroleum and natural gas industries. Performance testing of cementing float equipment | |
| Photography - Processing chemicals - Specifications for 4-(N-ethyl-N-2-metha nesulfonylaminoethyl )-2-methylphenylened iamine sesquisulfate monohydrate | |
| Photography \x97 Digital cameras \x97 Geometric distortion (GD) measurements | |
| Photography \x97 Digital cameras \x97 Shading measurements | |
| Photography \x97 Digital cameras \x97 Specification guideline | |
| Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) | |
| Photography. Cameras using 35 mm film and roll film. Picture sizes | |
| Plastics - Determination of specific volume as a function of temperature and pressure (pvT diagram) - Piston apparatus method | |
| Plastics - Epoxy resins - Test methods | |
| Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films | |
| Plastics - Test method for estimation of the short chain branching distribution of semicrystalline ethylene 1-olefin copolymers - Differential scanning calorimetry (DSC) | |
| Plastics \x97 Film and sheeting \x97 Cast polypropylene (PP) films | |
| Plastics \x97 Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 1: Designation system and basis for specification... | |
| Plastics \x97 Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination... | |
| Plastics \x97 Quantitative evaluation of scratch-induced damage and scratch visibility | |
| Plastics \x97 Thermoset moulding compounds \x97 Determination of the degree of fibre wetting in SMC | |
| Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved | |
| Plastics piping systems - Multilayer piping systems for outdoor gas installations - Specifications for systems | |
| Plastics piping systems \x97 Mechanical fittings for pressure piping systems \x97 Specifications | |
| Plastics Polyols for Use in the Production of Polyurethane Determination of Degree of Unsaturation by Microtitration | |
| PPE ensembles for firefighters undertaking hazardous materials response activities Part 1: Gas-tight, vapour-protective ensembles for emergency response teams ("type 1") | |
| Press tools for tablets - Punches and dies | |
| Processing of health care products \x97 Information to be provided by the medical device manufacturer for the processing of medical devices Part 2: Non-critical medical devices | |
| Quality management systems - Guidelines for the application of ISO 9001 in local government | |
| Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods Part 1: Ceramic tile surfaces with incorporated antibacterial agents | |
| Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods Part 2: Ceramic tile surfaces with incorporated photocatalytic antibacterial agents | |
| Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation | |
| Quick-frozen coated aquatic products - Specification | |
| Rapid detection of moisture content in fresh meat \x97 Low-field nuclear magnetic resonance (LF-NMR) method | |
| Reaction to fire tests - Mass loss measurement | |
| Refrigerant properties | |
| Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - General requirements for automatic tank gauges Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers... | |
| Refrigerated light hydrocarbon fluids - General requirements for automatic level gauges - Part 2: Gauges in refrigerated-type shore tanks | |
| Refrigerated light hydrocarbon fluids General requirements for automatic level gauges Part 1: Gauges onboard ships carrying liquefied gases | |
| Reload startup physics tests for pressurized water reactors | |
| Remote handling devices for radioactive materials Part 1: General requirements | |
| Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil | |
| Resistance welding Welding current measurement for resistance welding Part 4: Calibration system | |
| Retail financial services - Merchant category codes | |
| Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature | |
| Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 2: Measurement of the enthalpy of fusion of crystallites | |
| Road vehicles - Aerosol separator performance test for internal combustion engines Part 1: General | |
| Road vehicles - Information for first and second responders Part 2: Rescue sheet for buses, coaches and heavy commercial vehicles | |
| Road vehicles - Information for first and second responders Part 3: Emergency response guide template | |
| Road vehicles - Local Interconnect Network (LIN) Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN) | |
| Road vehicles \x97 Aerosol separator performance test for internal combustion engines Part 1: General | |
| Road Vehicles \x97 Aerosol separator performance test for internal combustion engines Part 4: Laboratory fractional efficiency test method | |
| Road vehicles \x97 Information for first and second responders Part 1: Rescue sheet for passenger cars and light commercial vehicles | |
| Road vehicles \x97 Information for first and second responders Part 4: Propulsion energy identification | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 1: General information and use case definition | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 2: Transport protocol and network layer services | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 3: Protocol specification | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 4: Electrical physical layer (EPL) specification 12 V/24 V | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 6: Protocol conformance test specification | |
| Road vehicles \x97 Local Interconnect Network (LIN) Part 7: Electrical Physical Layer (EPL) conformance test specification | |
| Road vehicles Trailers up to 3,5 t Control of welded towing brackets for coupling ball after fatigue testing | |
| Rolling bearings - Method for calculating the effective static safety factor for universally loaded rolling bearings | |
| Rough-terrain trucks \x97 Visibility \x97 Test methods and their verification Part 1: Variable-reach trucks | |
| Round steel short link chains for lifting purposes \x97 Medium tolerance sling chains \x97 Grade 4, stainless steel | |
| Rubber hose and hose assemblies for oil suction and discharge service \x97 Specification | |
| Rubber, Raw natural and Raw Synthetic - Sampling and Further Preparative Procedures | |
| Rubber, Vulcanized - Determination of the Effect of Liquids | |
| Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadrupleshear methods | |
| Rubber- or plastics-coated fabrics - Determination of water absorption resistance | |
| Safety of amusement rides and amusement devices Part 1: Design and manufacture | |
| Safety of amusement rides and amusement devices Part 2: Operation and use | |
| Safety of amusement rides and amusement devices Part 3: Requirements for inspection during design, manufacture, operation and use | |
| Ships and marine technology - Computer applications - General principles for the development and use of programmable electronic systems in marine applications | |
| Ships and marine technology - Design and testing requirements of pneumatic quick-closing valves | |
| Ships and marine technology - Marine electric window wipers | |
| Ships and marine technology - Methodology for ship launching utilizing air bags | |
| Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape | |
| Ships and marine technology - Ships' side scuttles | |
| Ships and marine technology - Vessel machinery operations in polar waters - Guidelines | |
| Ships and marine technology \x97 Ceramic weld backing for marine use | |
| Ships and marine technology \x97 Globe valves for use in low temperature applications \x97 Design and testing requirements | |
| Ships and marine technology \x97 Hinged watertight doors | |
| Ships and marine technology \x97 Hydraulic hinged watertight fireproof doors | |
| Ships and marine technology \x97 Incinerator sizing and selection \x97 Guidelines | |
| Ships and marine technology \x97 Inland navigation vessels \x97 Lifebuoy housings | |
| Ships and marine technology \x97 Inland navigation vessels \x97 Plate with instructions for rescue, resuscitation and first aid for drowning persons | |
| Ships and marine technology \x97 Installation, inspection and maintenance of container securing devices for ships | |
| Ships and marine technology \x97 Metal valves for use in flanged pipe \x97 Face-to-face and centre-to-face dimensions | |
| Ships and marine technology \x97 Navigation and shallow-water engineering vessels \x97 Anchor winches | |
| Ships and marine technology \x97 Oil tank hatches | |
| Ships and marine technology \x97 Safety valve for cargo tanks of LNG carriers \x97 Design and testing requirements | |
| Ships and marine technology \x97 Servicing of inflatable life-saving appliances Part 1: General | |
| Ships and marine technology \x97 Servicing of inflatable life-saving appliances Part 2: Inflatable life rafts | |
| Ships and marine technology \x97 Servicing of inflatable life-saving appliances Part 3: Inflatable lifejackets | |
| Ships and marine technology \x97 Servicing of inflatable life-saving appliances Part 4: Marine evacuation systems | |
| Ships and marine technology \x97 Servicing of inflatable life-saving appliances Part 5: Inflated rescue boats | |
| Ships and marine technology \x97 Ship-shifting winches | |
| Ships and marine technology \x97 Single point mooring arrangements for conventional tankers | |
| Ships and marine technology Searchlights for high-speed craft | |
| Ships and marine technology. Shipboard plans for fire protection, life-saving appliances and means of escape | |
| Short Link Chain for Lifting Purposes - General Conditions of Acceptance | |
| Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900) | |
| Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil | |
| Soil quality - Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials | |
| Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test | |
| Soil quality - Screening method for soil temperature - Measurement by infrared (IR) thermometer | |
| Soil quality \x97 Assessment of human exposure from ingestion of soil and soil material \x97 Procedure for the estimation of the human bioaccessibility/bio availability of metals in soil | |
| Soil quality \x97 Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis | |
| Soil quality \x97 Determination of elemental composition by Xray fluorescence | |
| Soil quality \x97 Extraction of trace elements using dilute nitric acid | |
| Soil quality \x97 Sampling Part 100: Guidance on the selection of sampling standards | |
| Soil quality \x97 Sampling Part 101: Framework for the preparation and application of a sampling plan | |
| Soil quality \x97 Sampling Part 102: Selection and application of sampling techniques | |
| Soil quality \x97 Sampling Part 103: Safety | |
| Soil quality \x97 Sampling Part 104: Strategies | |
| Soil quality \x97 Sampling Part 105: Packaging, transport, storage and preservation of samples | |
| Soil quality \x97 Sampling Part 106: Quality control and quality assurance | |
| Soil quality \x97 Sampling Part 107: Recording and reporting | |
| Soil quality \x97 Sampling Part 201: Physical pretreatment in the field | |
| Soil quality \x97 Sampling Part 202: Preliminary investigations | |
| Soil quality \x97 Sampling Part 203: Investigation of potentially contaminated sites | |
| Soil quality \x97 Sampling Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites | |
| Soil quality \x97 Sampling Part 206: Collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory | |
| Space data and information transfer systems - Asynchronous message service | |
| Space data and information transfer systems - Lossless multispectral and hyperspectral image compression | |
| Space data and information transfer systems - Mission operations message abstraction layer | |
| Space data and information transfer systems - Mission operations reference model | |
| Space data and information transfer systems - Pseudo- Noise (PN) Ranging Systems | |
| Space data and information transfer systems - Spacecraft onboard interface services - RFID-based inventory management systems | |
| Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Device Discovery Service | |
| Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Memory Access Service | |
| Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Packet Service | |
| Space data and information transfer systems - Spacecraft Onboard Interface Services - Subnetwork Synchronization Service | |
| Space data and information transfer systems - XML Telemetric and Command Exchange (XTCE) | |
| Space data and information transfer systems \x97 Data transmission and pseudorandom noise (PN) ranging for 2 GHz code division multiple access (CDMA) link via data relay satellite | |
| Space data and information transfer systems \x97 Delta-differential one-way ranging (Delta-DOR) operations | |
| Space data and information transfer systems \x97 Flexible advanced coding and modulation scheme for high rate telemetry applications | |
| Space data and information transfer systems \x97 Telemetry (TM) channel coding profiles | |
| Space environment (natural and artificial) \x97 Cosmic ray and solar energetic particle penetration inward the magnetosphere \x97 Method of determination of the effective vertical cut-off rigidity | |
| Space environment (natural and artificial) \x97 Model of high energy radiation at low altitudes (300 km to 600 km) | |
| Space systems - Closed loop problem solving management | |
| Space systems - Cube satellite (CubeSat) interface | |
| Space systems - General test documentation | |
| Space systems - Interface control documents between ground systems, ground support equipment and launch vehicle with payload | |
| Space systems - Space based services requirements for centimetre class positioning | |
| Space systems - Space environment simulation for material tests - General principles and criteria | |
| Space systems \x97 Cube satellites (CubeSats) | |
| Space systems \x97 General management requirements for space test centres | |
| Space systems \x97 Human-life activity support systems and equipment integration in space flight | |
| Space systems \x97 Liquid rocket engines and test stands \x97 Terms and definitions | |
| Space systems \x97 Lithium ion battery for space vehicles \x97 Design and verification requirements | |
| Space systems \x97 Semiconductor integrated circuits for space applications \x97 Design requirements | |
| Specification of polypropylene drinking straws | |
| Stationary equipment for agriculture - Data communications network for livestock farming | |
| Steady-state neutronics methods for power-reactor analysis | |
| Steel - Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm | |
| Steel \x97 Determination of the thickness of surface-hardened layers | |
| Steel structures - Execution of structural steelwork Part 1: General requirements and terms and definitions | |
| Steel structures - Execution of structural steelwork Part 2: Steels | |
| Steel structures - Execution of structural steelwork Part 3: Fabrication | |
| Steel structures - Execution of structural steelwork Part 4: Erection | |
| Steel structures - Execution of structural steelwork Part 5: Welding | |
| Steel structures - Execution of structural steelwork Part 6: Bolting | |
| Steel wire ring net panels - Definitions and specifications | |
| Steel wire rope net panels and rolls \x97 Definitions and specifications | |
| Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis | |
| Surface chemical analysis - Handling of specimens prior to analysis | |
| Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis | |
| Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials | |
| Surface Chemical Analysis - Secondary-Ion Mass Spectrometry - Method for Depth Profiling of Boron in Silicon | |
| Surface chemical analysis - Vocabulary Part 1: General terms and terms used in spectroscopy | |
| Surface chemical analysis - Vocabulary Part 2: Terms used in scanning-probe microscopy | |
| Surface Chemical Analysis - Vocabulary | |
| Surface chemical analysis \x97 Secondary ion mass spectrometry \x97 Linearity of intensity scale in single ion counting time-of-flight mass analysers | |
| Surface chemical analysis \x97 Surface characterization \x97 Measurement of the lateral resolution of a confocal fluorescence microscope | |
| Surface chemical analysis \x97 Vocabulary Part 3: Terms used in optical interface analysis | |
| Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials | |
| Surface chemical analysis Medium-resolution Auger electron spectrometers Calibration of energy scales for elemental analysis | |
| Technical product documentation (TPD) - Relief grooves - Types and dimensioning | |
| Technical product documentation (TPD) \x97 General requirements of digital mock-up for mechanical products | |
| Testing methods for pervious concrete Part 2: Density and void content | |
| Testing methods for pervious concrete Part 3: Resistance of surface degradation | |
| Textile floor coverings - Colour fastness to shampooing | |
| Textile floor coverings - Determination of number of tufts and/or loops per unit length and per unit area | |
| Textile Floor Coverings - Determination of Thickness of Pile Above the Substrate | |
| Textile slings \x97 Lifting slings for general purpose lifting operations made from fibre ropes \x97 High modulus polyethylene (HMPE) | |
| Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends | |
| Textiles \x97 Bare elastane yarns \x97 Determination of resistance to chlorinated water (swimming-pool water) | |
| Textiles \x97 Determination of antiviral activity of textile products | |
| Textiles \x97 Identification of some animal fibres by DNA analysis method \x97 Cashmere, wool, yak and their blends | |
| Textiles \x97 Manmade filament yarns \x97 Determination of shrinkage in boiling water | |
| Textiles \x97 Quantitative chemical analysis Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate) | |
| Textiles \x97 Quantitative chemical analysis Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid) | |
| Textiles \x97 Synthetic filament yarns \x97 Determination of shrinkage in dry-hot air (after treatment) | |
| Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature | |
| Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion | |
| Thermal insulation products - Exterior insulation and finish systems (EIFS) Part 3: Design requirements | |
| Thermal insulation products - Exterior insulation and finish systems Part 1: Materials and systems | |
| Thermal insulation products \x97 Exterior insulation and finish systems (EIFS) Part 2: Installation | |
| Thermal insulation products \x97 Sheep wool mat and board \x97 Specification | |
| Thermoplastic elastomers Nomenclature and abbreviated terms | |
| Time-measuring instruments - Photoluminescent deposits - Test methods and requirements | |
| Tourism and related services - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements | |
| Tourism and related services \x97 Thalassotherapy \x97 Service requirements | |
| Tourism and related services \x97 Wellness spa \x97 Service requirements | |
| Traceability of rare earths in the supply chain from separated products to permanent magnets | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - General requirements for airway devices and related equipment | |
| Tracked Changes (Redline) - Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature | |
| Tracked Changes (Redline) - Carbonaceous materials used in the production of aluminium \x97 Cold and tepid ramming pastes \x97 Determination of rammability of unbaked pastes | |
| Tracked Changes (Redline) - Clinical laboratory testing and in vitro medical devices \x97 Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy | |
| Tracked Changes (Redline) - Coal and coke \x97 Manual sampling | |
| Tracked Changes (Redline) - Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 3: Requirements for training bodies and the training process | |
| Tracked Changes (Redline) - Condition monitoring and diagnostics of machines \x97 Requirements for certification of personnel \x97 Part 6: Acoustic emission | |
| Tracked Changes (Redline) - Digital imaging - Specification guideline for digital cameras | |
| Tracked Changes (Redline) - Earth-moving machinery and mining \x97 Autonomous and semi-autonomous machine system safety | |
| Tracked Changes (Redline) - Gasoline engines - High pressure liquid fuel supply connections - Part 2: Pipe assemblies | |
| Tracked Changes (Redline) - Graphic technology \x97 Colour data exchange format (CxF/X) Part 4: Spot colour characterisation data (CxF/X-4) | |
| Tracked Changes (Redline) - Hydraulic fluid power - Cleanliness of components - Inspection document and principles related to contaminant extraction and analysis, and data reporting | |
| Tracked Changes (Redline) - Indexable inserts for cutting tools - Designation | |
| Tracked Changes (Redline) - Information and documentation - Records risks - Risk assessment for records management | |
| Tracked Changes (Redline) - Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 1: General requirements and conceptual model | |
| Tracked Changes (Redline) - Intelligent transport systems (ITS) \x97 Location referencing for geographic databases Part 2: Pre-coded location references (pre-coded profile) | |
| Tracked Changes (Redline) - Metallic materials \x97 Torsion test at room temperature | |
| Tracked Changes (Redline) - Meteorological balloons - Specification | |
| Tracked Changes (Redline) - Microscopes \x97 Microscopes with digital imaging displays \x97 Information provided to the user regarding imaging performance | |
| Tracked Changes (Redline) - Paper, board, pulps and cellulose nanomaterials \x97 Determination of residue (ash content) on ignition at 525 \xb0C | |
| Tracked Changes (Redline) - Plastics \x97 Determination of specific volume as a function of temperature and pressure, pvT diagram \x97 Piston apparatus method | |
| Tracked Changes (Redline) - Plastics \x97 Film and sheeting \x97 Biaxially oriented polypropylene (PP) films | |
| Tracked Changes (Redline) - Plastics \x97 Polyols for use in the production of polyurethanes \x97 Determination of degree of unsaturation by microtitration | |
| Tracked Changes (Redline) - Reaction to fire tests - Mass loss measurement | |
| Tracked Changes (Redline) - Refrigerant properties | |
| Tracked Changes (Redline) - Reload startup physics tests for pressurized water reactors | |
| Tracked Changes (Redline) - Road vehicles - Information for first and second responders - Part 1: Rescue sheet for passenger cars and light commercial vehicles | |
| Tracked Changes (Redline) - Road vehicles - Local Interconnect Network (LIN) - Part 2: Transport protocol and network layer services | |
| Tracked Changes (Redline) - Road vehicles - Local Interconnect Network (LIN) Part 1: General information and use case definition | |
| Tracked Changes (Redline) - Road vehicles - Local Interconnect Network (LIN) Part 6: Protocol conformance test specification | |
| Tracked Changes (Redline) - Road vehicles \x97 Local Interconnect Network (LIN) \x97 Part 3: Protocol specification | |
| Tracked Changes (Redline) - Road vehicles \x97 Local Interconnect Network (LIN) \x97 Part 4: Electrical physical layer (EPL) specification 12 V/24 V | |
| Tracked Changes (Redline) - Road vehicles \x97 Local Interconnect Network (LIN) \x97 Part 7: Electrical physical layer (EPL) conformance test specification | |
| Tracked Changes (Redline) - Rubber, raw natural and raw synthetic - Sampling and further preparative procedures | |
| Tracked Changes (Redline) - Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods | |
| Tracked Changes (Redline) - Rubber, vulcanized or thermoplastic \x97 Determination of the effect of liquids | |
| Tracked Changes (Redline) - Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use | |
| Tracked Changes (Redline) - Safety of amusement rides and amusement devices \x97 Part 2: Operation and use | |
| Tracked Changes (Redline) - Ships and marine technology - Shipboard plans for fire control, damage control, life-saving appliances and means of escape | |
| Tracked Changes (Redline) - Soil quality \x97 Sampling Part 103: Safety | |
| Tracked Changes (Redline) - Space environment (natural and artificial) \x97 Cosmic ray and solar energetic particle penetration inward the magnetosphere \x97 Method of determination of the effective vertical cut-off rigidity... | |
| Tracked Changes (Redline) - Space systems \x97 Interface control documents between ground systems, ground support equipment and launch vehicle with payload | |
| Tracked Changes (Redline) - Space systems \x97 Liquid rocket engines and test stands \x97 Vocabulary | |
| Tracked Changes (Redline) - Space systems \x97 Lithium ion battery for space vehicles \x97 Design and verification requirements | |
| Tracked Changes (Redline) - Steel - Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm | |
| Tracked Changes (Redline) - Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials | |
| Tracked Changes (Redline) - Surface chemical analysis - Vocabulary - Part 2: Terms used in scanning-probe microscopy | |
| Tracked Changes (Redline) - Surface chemical analysis \x97 Auger electron spectroscopy and X-ray photoelectron spectroscopy \x97 Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis... | |
| Tracked Changes (Redline) - Surface chemical analysis \x97 Mediumresolution Auger electron spectrometers \x97 Calibration of energy scales for elemental analysis | |
| Tracked Changes (Redline) - Surface chemical analysis \x97 Secondary ion mass spectrometry \x97 Linearity of intensity scale in single ion counting time-of-flight mass analysers | |
| Tracked Changes (Redline) - Surface chemical analysis \x97 Vocabulary \x97 Part 1: General terms and terms used in spectroscopy | |
| Tracked Changes (Redline) - Textile slings \x97 Lifting slings for general purpose lifting operations made from fibre ropes \x97 High modulus polyethylene (HMPE) | |
| Tracked Changes (Redline) - Thermal insulation products - Exterior insulation finish systems - Part 1: Materials | |
| Tracked Changes (Redline) - Time-measuring instruments \x97 Photoluminescent deposits \x97 Test methods and requirements | |
| Tracked Changes (Redline) - Workplace air \x97 Determination of mercury and inorganic mercury compounds \x97 Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry | |
| Tracked Changes (Redline) - Workplace atmospheres \x97 Determination of total isocyanate groups in air using 1-(9-anthracenylmeth yl)piperazine (MAP) reagent and liquid chromatography | |
| Tracked Changes (Redline) \x96 Soil quality \x97 Assessment of human exposure from ingestion of soil and soil material \x97 Procedure for the estimation of the human bioaccessibility/bio availability of metals... | |
| Tracked Changes (Redline) \x96 Textiles \x97 Determination of antiviral activity of textile products | |
| Tractors and machinery for agriculture and forestry - Auxiliary-power-tran smission connector for the operator station | |
| Transport Information and Control Systems (TICS) - General fleet management and commercial freight operations - Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation... | |
| Underwater acoustics \x97 Measurement of radiated underwater sound from percussive pile driving | |
| Underwater acoustics \x97 Terminology | |
| Water quality - Determination of dioxin-like polychlorinated biphenyls - Method using gas chromatography/mass spectrometry | |
| Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS | |
| Water quality \x97 Detection and enumeration of thermotolerant Campylobacter spp | |
| Water quality \x97 Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection | |
| Water quality \x97 Determination of pHt in sea water \x97 Method using the indicator dye m-cresol purple | |
| Water Quality Determination of 15 Polycyclic Aromatic Hydrocarbons (PAH) in Water by HPLC with Fluorescence Detection After Liquid-Liquid Extraction | |
| Water quality Determination of mercury Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry | |
| Wear of implant materials Polymer and metal wear particles Isolation, characterization and quantification | |
| Welding for aerospace applications - Fusion welding of metallic components Part 1: Process specification | |
| Welding for aerospace applications - Fusion welding of metallic components Part 2: Acceptance criteria | |
| Welding for aerospace applications \x97 Welding information in design documents | |
| Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase | |
| Workplace air \x97 Terminology | |
| Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry | |
| Workplace air quality - Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography | |
| Workplace atmospheres - Determination of total isocyanate groups in air using 1-(9-anthracenylmeth yl) piperazine (MAP) reagent and liquid chromatography |
| << Prev | Next >> |