Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
570
580
590
600
610
620
624
625
626
627
628
629
630
631
632
633
634
635
636
640
650
660
670
680
690
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Accessibility and usability of the built environment \x96 Conformity assessment | |
| Accessibility and usability of the built environment \x96 Technical performance criteria and specifications | |
| Additive manufacturing \x96 Design \x96 Functionally graded additive manufacturing (ISO/ASTM/TR 52912:2020) | |
| Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container | |
| Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method | |
| Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites | |
| Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres | |
| Advanced technical ceramics - Ceramic composites - Guide to the determination of the degree of misalignment in uniaxial mechanical tests | |
| Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method | |
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula | |
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion | |
| Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection | |
| Advanced technical ceramics \x96 Ceramic composites \x96 Thermophysical properties \x96 Part 4: Determination of thermal conductivity | |
| Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements | |
| Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods | |
| Air Traffic Management - Specification for software assurance levels | |
| Algae and algae products \x96 Food and feed applications: General overview of limits, procedures and analytical methods | |
| Algae and algae products \x96 Specifications for chemicals and biofuels sector applications | |
| Algae and algae products \x96 Specifications for cosmetic sector applications | |
| Algae and algae products \x96 Specifications for pharmaceutical sector applications | |
| Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene , benzo[j]fluoranthene , benzo[k]fluoranthene , dibenz[a,h]anthracen e, indeno[1,2,3-cd]pyre ne and benzo[ghi]perylene | |
| Ambient air \x96 Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse | |
| Ambient air \x96 Equivalence of automatic measurements of elemental carbon (EC) and organic carbon (OC) in PM | |
| Ambient air \x96 Measurement of bioaerosols \x96 Part 2: Planning and evaluation of plant-related plume measurements | |
| Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses | |
| Animal feeding stuffs - Determination of sugar content - High performance exchange chromatographic method (HPAEC-PAD) | |
| Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) | |
| Applicability of CEN Standards to Qualified Electronic Seal Creation Device under the EU Regulation N\xb0910/2014 (eIDAS) | |
| Automotive fuels \x96 Diesel fuel market issues \x96 Abrasive particles investigation report | |
| Automotive fuels \x96 Ethanol (E85) automotive fuel \x96 Requirements and test methods | |
| Automotive fuels \x96 Information on aniline, N-methyl aniline, N-ethyl aniline, N,N di-methyl aniline and secondary-butyl acetate when used as blending components in unleaded petrol | |
| Automotive fuels \x96 Paraffinic diesel fuel from synthesis or hydrotreatment \x96 Requirements and test methods | |
| Automotive fuels \x96 Report on studies done on cold soak filter blocking tendency (CS-FBT) on fatty acid methyl ester (FAME) as blend component for diesel fuel, and of diesel fuel... | |
| BIM in infrastructure \x96 Standardization need and recommendations | |
| Bio-based products \x96 Use of stable isotope ratios of Carbon, Hydrogen, Oxygen and Nitrogen as tools for verification of the origin of bio-based feedstock and characteristics of production processes \x96... | |
| Biodegradable plastics \x96 Status of standardization and new prospects | |
| Biomass gasification - Tar and particles in product gases - Sampling and analysis | |
| Biometrics Interoperability profiles \x96 Best Practices for slap tenprint captures | |
| Bitumen and bituminous binders \x96 Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode | |
| Bitumen and bituminous binders \x96 Determination of the fracture toughness temperature by a three point bending test on a notched specimen | |
| Bitumen and bituminous binders \x96 Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode | |
| Bitumen and bituminous binders \x96 Examples for CE Marking and Declaration of Performances (DoP) | |
| Bitumens and bituminous binders \x96 Sustainability \x96 Review on how to address environmental information | |
| Bituminous binders \x96 Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate | |
| Bituminous mixtures \x96 Test methods \x96 Part 50: Resistance to scuffing | |
| Bituminous mixtures \x96 Test methods \x96 Part 51: Surface shear strength test | |
| Bituminous mixtures \x96 Test methods \x96 Part 52: Conditioning to address oxidative ageing | |
| Building automation, controls and building management \x96 Smart building \x96 Description and aspects | |
| Building information modelling \x96 Digital twins applied to the built environment \x96 Use cases | |
| Building management - Terminology and scope of services | |
| Cabin air quality on civil aircraft \x96 Chemical compounds | |
| Calibration and accuracy of non-catching precipitation measurement instruments | |
| CBRN - Vulnerability Assessment and Protection of People at Risk | |
| Cereals (wheat and barley) \x96 Technical Report of the interlaboratory studies for the determination of moisture and protein in whole kernels by near infrared spectroscopy | |
| Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at adapted hydration from commercial or test flours and test milling methodology | |
| Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour | |
| Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions... | |
| Characterisation of waste \x96 Test methods for the determination of the monolithic status of waste | |
| Characterization of sludges - Sludge management in relation to use or disposal | |
| Characterization of waste - Determination of gross calorific value and calculation of net calorific value | |
| Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity | |
| Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) | |
| Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test | |
| Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds | |
| Characterization of waste \x96 Leaching behaviour tests \x96 Up-flow percolation test (under specified conditions) | |
| Chemical disinfectants and antiseptics \x96 Information on the preparation of spores and determination/exclus ion of sporistatical activity | |
| Chimney terminals - General requirements and material independent test methods | |
| Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions | |
| Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air | |
| Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test | |
| Construction products \x96 Assessment of release of dangerous substances \x96 Part 1: Guidance for the determination of leaching tests and additional testing steps | |
| Construction products \x96 Assessment of release of dangerous substances \x96 Part 3: Horizontal up-flow percolation test | |
| Construction products: Assessment of release of dangerous substances \x96 Guidance for a broader application of the CEN/TC 351 reference room | |
| Construction products: Assessment of release of dangerous substances \x96 Pros and cons of methods for communicating the potential release of dangerous substances into soil, groundwater or surface water and indoor... | |
| Continuous handling equipment and systems \x96 Safety requirements for equipment for mechanical handling of unit loads \x96 Interpretations relating to EN 619:2022 | |
| Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 3: Cookware for use on induction heating sources | |
| Cookware \x96 Domestic cookware for use on top of a stove, cooker or hob \x96 Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware... | |
| Copper and copper alloys - Compendium of compositions and products | |
| Copper and copper alloys - Determination of chromium content - Part 1: Titrimetric method | |
| Copper and copper alloys - Determination of manganese content - Part 1: Spectrophotometric method | |
| Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method | |
| Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method | |
| Copper and copper alloys \x96 Compendium of compositions and products | |
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems | |
| Crime prevention through building design, urban planning and city maintenance \x96 Part 2: Principles and process | |
| Criteria for the assessment of conformity of a lot of sawn timber | |
| Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds | |
| Cycles \x96 Components and assemblies used in bicycles \x96 Innovative requirements and test methods | |
| Determination of extractable perfluorooctanesulph onate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS | |
| Determination of slip resistance of pedestrian surfaces \x96 Methods of evaluation | |
| Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing \x96 Test method for mechanical fasteners | |
| Ductile iron pipes, fittings, accessories and their joints for sewerage applications \x96 Guidelines for Pipelines Installation | |
| Durability of reaction to fire performance \x96 Classes of fire-retardant treated wood-based product in interior and exterior end use applications | |
| Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray... | |
| Durability of wood and wood-based products - Determination of natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi | |
| Durability of wood and wood-based products \x96 Determination of emissions from preservative treated wood to the environment \x96 Part 1: Wood held in the storage yard after treatment and wooden... | |
| Durability of wood and wood-based products \x96 Determination of emissions from preservative treated wood to the environment \x96 Part 2: Wooden commodities exposed in Use Class 4 or 5 (in... | |
| Durability of wood and wood-based products \x96 Determination of emissions from preservative treated wood to the environment \x96 Wooden commodities exposed in Use Class 3 (Not covered, not in contact... | |
| Durability of wood and wood-based products \x96 Determination of the natural durability of solid wood against wood-destroying fungi, test methods \x96 Part 1: Basidiomycetes | |
| Durability of wood and wood-based products \x96 Interpretation document for standards related to efficacy requirements and specifications of wood preservatives | |
| Durability of wood and wood-based products \x96 Remedial treatment of wood against insects by injection | |
| e-Competence performance indicators and common metrics | |
| Electrochemical re-alkalization and chloride extraction treatments for reinforced concrete \x96 Part 2: Chloride extraction | |
| Electronic fee collection - Interoperable application profiles for autonomous systems | |
| Electronic fee collection \x96 EETS gap analysis and proposed standards roadmap | |
| Electronic fee collection \x96 Secure monitoring for autonomous toll systems \x96 Part 1: Compliance checking | |
| Electronic fee collection \x96 Secure monitoring for autonomous toll systems \x96 Part 2: Trusted recorder | |
| Energy Performance of Buildings \x96 Basic Principles for the set of EPB standards | |
| Energy Performance of Buildings \x96 Detailed Technical Rules for the set of EPB-standards | |
| Ergonomics \x96 Demands and availability of anthropometric and strength data of children in Europe | |
| European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) | |
| Evaluation of a.c. corrosion likelihood of buried pipelines - Application to cathodically protected pipelines | |
| Execution of steel structures and aluminium structures \x96 Reuse of structural steel | |
| Explosives for civil uses \x96 Detonators and relays \x96 Part 27: Definitions, methods and requirements for electronic initiation systems | |
| External fire exposure of roofs and roof coverings \x96 Extended application of test results from CEN/TS 1187 | |
| Fertilizers - Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions | |
| Fire safety engineering in Europe \x96 Review of national requirements and application | |
| Firefighting vehicles and equipment - Symbols for operator controls and other displays | |
| Fixed firefighting systems - Water spray systems - Design, installation and maintenance | |
| Fixed firefighting systems \x96 Watermist systems \x96 Design and installation | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint | |
| Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to... | |
| Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD) | |
| Foodstuffs - Detection of food allergens by immunological methods - Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection | |
| Foodstuffs - Detection of food allergens by immunological methods - Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection | |
| Foodstuffs - Determination of acesulfame-K, aspartame, neohesperidine-dihyd rochalcone and saccharin - High performance liquid chromatographic method | |
| Foodstuffs - Determination of neohesperidin-dihydr ochalcon | |
| Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 1: Determination of astaxanthin and canthaxanthin | |
| Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 2: Identification of the enantiomer ratio of astaxanthin | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Sampling strategies | |
| Foodstuffs \x96 Detection of food allergens by molecular biological methods \x96 Part 2: Celery (Apium graveolens) \x96 Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR... | |
| Foodstuffs \x96 Detection of food allergens by molecular biological methods \x96 Part 3: Hazelnut (Corylus avellana) \x96 Qualitative detection of a specific DNA sequence in chocolate by real-time PCR | |
| Foodstuffs \x96 Detection of food allergens by molecular biological methods \x96 Part 4: Peanut (Arachis hypogaea) \x96 Qualitative detection of a specific DNA sequence in chocolate by real-time PCR | |
| Foodstuffs \x96 Detection of food allergens by molecular biological methods \x96 Part 5: Mustard (Sinapis alba) and soya (Glycine max) \x96 Qualitative detection of a specific DNA sequence in cooked... | |
| Foundational Body of Knowledge for the ICT Profession (ICT BoK) \x96 Part 2: User Guide and Methodology | |
| Framework and Implementation of Common Data Environment solutions and workflow, in accordance with EN ISO 19650 | |
| Framework for standardization of signatures \x96 Extended structure including electronic identification and authentication | |
| Fume cupboards - Part 5: Recommendations for installation and maintenance | |
| Furniture - Assessment of the surface resistance to microscratching | |
| Furniture - Assessment of the surface resistance to scratching | |
| Furniture \x96 Classification for properties for furniture surfaces | |
| Furniture \x96 Common test equipment \x96 Test foams and mattresses | |
| Gas infrastructure \x96 Consequences of hydrogen in the gas infrastructure and identification of related standardisation need in the scope of CEN/TC 234 | |
| Gas infrastructure \x96 Pipelines for maximum operating pressure up to and including 16 bar \x96 Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) | |
| Gas supply systems - Frame of reference regarding Pipeline Integrity Management System (PIMS) | |
| Gas Supply Systems \x96 Guidelines for Management systems for Gas Distribution Network | |
| Gas welding equipment \x96 Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes | |
| Gas-fired central heating boilers \x96 Part 3-1: H2NG and ACCF \x96 Expansion of EN 15502-2-1:2022 | |
| Geosynthetic barriers - Test method for determining the resistance to roots | |
| Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers | |
| Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers | |
| Graphical symbols for use on integrated building automation equipment | |
| Guidance for signature creation and other related devices | |
| Guidance for understanding and utilize EN/ISO 29481-1 Building information models \x96 Information delivery manual \x96 Part 1: Methodology and format | |
| Guidance on databases for human vibration | |
| Guidance on direct and extended application | |
| Guideline for the implementation of Exchange Information Requirements (EIR) and BIM Execution Plans (BEP) on European level based on EN ISO 19650-1 and -2 | |
| Guidelines for implementors of EN 15744 and EN 15907 | |
| Guidelines for selection, use, care and maintenance of smart garments protecting against heat and flame | |
| Guidelines for water safety plan concept in buildings | |
| Health informatics - General purpose information components - Part 4: Message headers | |
| Health informatics \x96 Classification of safety risks from health informatics products | |
| Hose tail and ferrule for crimping and swaging | |
| ICT accessibility competences \x96 Guidelines for a more inclusive ICT development | |
| Identification card system - Guidance on design for accessible card-activated devices | |
| Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics | |
| Identification card systems - European Citizen Card - Part 2: Logical data structures and security services | |
| Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface | |
| Identification card systems - European Citizen Card - Part 4: Recommendations for European Citizen Card issuance, operation and use | |
| Identification card systems - European Citizen Card - Part 5: General Introduction | |
| Information technology - Notification of RFID - The information sign to be displayed in areas where RFID interrogators are deployed | |
| Inhalational nitric oxide systems - Part 1: Delivery systems | |
| Inhalational nitric oxide systems - Part 2: Supply systems | |
| Innovation Management - Part 1: Innovation Management System | |
| Innovation management - Part 2: Strategic intelligence management | |
| Innovation management - Part 4: Intellectual property management | |
| Innovation management - Part 5: Collaboration management | |
| Innovation management - Part 7: Innovation Management Assessment | |
| Innovation management \x96 Part 3: Innovation thinking | |
| Innovation management \x96 Part 6: Creativity management | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 2: Location referencing | |
| Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications | |
| Intelligent transport systems - ESafety - ECall end to end conformance testing | |
| Intelligent transport systems - Public transport - Indirect Fulfilment for Rail | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 10: Energy infrastructure publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 11: Publication of machine interpretable traffic regulations | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 12: Facility related publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 13: Status, fault and quality requirements | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 1: Context and framework | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 3: Situation Publication | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 4: Variable Message Sign (VMS) Publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 6: Parking Publications | |
| Intelligent transport systems \x96 DATEX II data exchange specifications for traffic management and information \x96 Part 9: Traffic signal management publications dedicated to the urban environment | |
| Intelligent transport systems \x96 Ecall \x96 Additional data concept specification for heavy goods vehicles | |
| Intelligent transport systems \x96 EU-ICIP \x96 ITS standards deliverables (2022) | |
| Internet Content and communications filtering software and services | |
| Interoperability of Flight Data Processing (Air Traffic Control - Air Traffic Control) for application under the Single European Sky - Interoperability Regulation EC 552/2004 | |
| Laminate floor coverings \x96 Underlays \x96 Specification, requirements and test methods | |
| Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control | |
| Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation | |
| Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive | |
| Lightweight Particleboards - Specifications | |
| Liming materials - Determination of the amount of residual finely ground carbonate in soils - Volumetric method | |
| Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions | |
| Liming materials - Guide to the determination of the lime requirement | |
| Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000... | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 10: Determination of acrylamide in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 11: Determination of 11-aminoundecanoic acid in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 12: Determination of 1,3-benzenedimethana mine in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 13: Determination of 2,2-bis(4-hydroxyphe nyl)propane (Bisphenol A) in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 14: Determination of 3,3-bis(3-methyl-4-h ydroxyphenyl)-2-indo line in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 15: Determination of 1,3-butadiene in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 16: Determination of caprolactam and caprolactam salt in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 18: Determination of 1,2-dihydroxybenzene , 1,3-dihydroxybenzene , 1,4-dihydroxybenzene , 4,4'-dihydroxybenzop henone and 4,4'dihydroxybipheny l in... | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 19: Determination of dimethylaminoethanol in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 21: Determination of ethylenediamine and hexamethylenediamine in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 23: Determination of formaldehyde and hexamethylenetetrami ne in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 24: Determination of maleic acid and maleic anhydride in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 25: Determination of 4-methyl-1-pentene in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 26: Determination of 1-octene and tetrahydrofuran in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 27: Determination of 2,4,6-triamino-1,3,5 -triazine in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 28: Determination of 1,1,1-trimethylolpro pane in food simulants | |
| Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 9: Determination of acetic acid, vinyl ester in food simulants | |
| Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration | |
| Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration | |
| Materials obtained from End-of-Life Tyres \x96 Granulated rubber \x96 Determination of textile fiber content by visual index (qualitative method) | |
| Materials obtained from End-of-Life Tyres \x96 Odour of ELT granulates \x96 Origin and remediation possibilities | |
| Materials produced from end of life tyres \x96 Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities | |
| Measurement of the coating properties of non-oriented electrical steel | |
| Mechanical products - Methodology for reduction of environmental impacts in product design and development | |
| Mechanical products \x96 Order of magnitude of key environmental data | |
| Methods of determination of the mechanical properties of self-bonding coating assemblies related to non-oriented electrical steels | |
| Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids | |
| Methods of testing cement - Part 4: Quantitative determination of constituents | |
| Mobile demolition machinery - Safety requirements | |
| Mounting and fixing in reaction to fire tests under the Construction Products Directive | |
| Non-active surgical implants - Injectable implants | |
| Non-destructive testing - Recommendations for discontinuities-type s in test specimens for examination | |
| Open data communication in building automation, controls and building management - Mapping between Lonworks and BACnet | |
| Optimal design of hydrometric networks | |
| Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Assessment of air inclusions/microfoam in coating films | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Assessment of film extensibility by indentation of a coating on a wooden substrate | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Assessment of knot staining resistance of wood coatings | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Assessment of resistance to impact of a coating on a wooden substrate | |
| Paints and varnishes \x96 Coating materials and coating systems for exterior wood \x96 Resistance to blocking of paints and varnishes on wood | |
| Parquet flooring - General guideline for installation | |
| Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously | |
| Personal identification - Recommendations for using biometrics in European Automated Border Control | |
| Personal identification \x96 Usage of biometrics in breeder documents | |
| Personal protective equipment \x96 Smart garments \x96 Terms and definitions | |
| Petroleum and related products \x96 Alternative fuels and fuel blending components assessment guide \x96 Information to producers and blenders of automotive fuels | |
| Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions | |
| Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Polyethylen (PE) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Polypropylene (PP) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastic piping systems for water supply - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity | |
| Plastics - Declaration of the bio-based carbon content | |
| Plastics - Determination of bio-based carbon content | |
| Plastics - Recycled plastics - Sample preparation | |
| Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet | |
| Plastics \x96 Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) \x96 Guidance for characterisation and designation | |
| Plastics \x96 Recycled plastics \x96 Sampling procedures for testing plastics waste and recyclates | |
| Plastics pipes and fittings \x96 Utilisation of thermoplastics recyclates \x96 Part 2: Recommendations for relevant characteristics | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines | |
| Plastics piping systems \x96 Validated design parameters of buried thermoplastics piping systems | |
| Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure \x96 Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) \x96 Guidance for the assessment of conformity... | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Polypropylene with mineral modifiers (PP-MD) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 4: Guidance for the assessment... | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 2: Guidance for assessment of conformity | |
| Plastics piping systems for non-pressure underground drainage and sewerage \x96 Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) \x96 Part 3: Guidance for assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Acrylonitrile-butadi ene-styrene (ABS) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Chlorinated poly(vinyl chloride) (PVC-C) \x96 Part 2: Guidance for assessment of conformity | |
| Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 2: Guidance for the assessment of conformity... | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity | |
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values | |
| Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity... | |
| Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation | |
| Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 2: Guidance for the assessment... | |
| Plastics rainwater piping systems for above ground external use \x96 Unplasticized poly(vinyl chloride) (PVC-U) \x96 Part 2: Guidance for the assessment of conformity | |
| Plastics recycling \x96 Classification of plastic recyclates as post-consumer recyclates (PCR) and post-industrial recyclates (PIR) | |
| Playground equipment for children \x96 Part 1: Replies to requests for interpretation of EN 1176:2017 and its parts (2018-2019) | |
| Playground equipment for children \xad Part 2: Replies to requests for interpretation of EN 1176:2017 and its parts (2020 \x96 2022) | |
| Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes | |
| Postal services - Automated processing of mail items - Address block locator | |
| Postal services - Automated processing of mail items - Facing identification marks | |
| Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering | |
| Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail | |
| Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations | |
| Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service | |
| Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling | |
| Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary | |
| Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification | |
| Postal services - ID-tagging of letter mail items - Part 3: BNB-62 encoding specification | |
| Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats | |
| Postal services - ID-tagging of letter mail items - Part 5: 4-state encoding specification for small letters | |
| Postal services - Mail aggregates - Creation, processing and tracking | |
| Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing | |
| Postal services - Open interface - Sortplan | |
| Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface | |
| Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation | |
| Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) | |
| Postal services - Quality of service - Information available on postal services | |
| Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters | |
| Postal Services - Statement of mailing submission | |
| Postal services \x96 Automatic identification of items \x96 Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks | |
| Postal services \x96 DPM infrastructure \x96 Messages supporting DPM applications | |
| Postal services \x96 Safe, secured and contactless delivery of postal items | |
| Prefabricated timber stairs - Mechanical test methods | |
| Pressure equipment - Part 6: Structure and content of operating instructions | |
| Prevention of crime - Urban planning and building design - Part 3: Dwellings | |
| Prevention of crime - Urban planning and design - Part 4: Shops and offices | |
| Prevention of crime \x96 Urban planning and building design \x96 Part 6: Schools and educational institutions | |
| Protective clothing - Hand, arm, leg, genital and neck protectors for use in ice hockey - Protectors for players other than goalkeepers - Requirements and test methods | |
| Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle | |
| Public transport - Service interface for real-time information relating to public transport operations - Part 5: Functional service interfaces situation exchange: Situation Exchange | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 1: Public transport network topology exchange format | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 2: Public transport scheduled timetables exchange format | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 3: Public transport fares exchange format | |
| Public transport \x96 Network and Timetable Exchange (NeTEx) \x96 Part 4: Passenger Information European Profile | |
| Public transport \x96 Network and timetable exchange (NeTEx) \x96 Part 5: Alternative modes exchange format | |
| Public transport \x96 Network and timetable exchange (NeTEx) \x96 Part 6: European Passenger Information Accessibility Profile | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 10: Location service | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 11: Vehicle platform interface service | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 3: WorldFIP message content | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 6: CAN message content | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 7: System and Network Architecture | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 8: Physical layer for IP communication | |
| Public transport \x96 Road vehicle scheduling and control systems \x96 Part 9: Time service | |
| Public transport \x96 Service interface for real-time information relating to public transport operations \x96 Part 4: Functional service interfaces: Facility Monitoring | |
| Public transport \x96 Service interface for real-time information relating to public transport operations \x96 Part 6: Functional service interfaces: Control Actions | |
| Railway application \x96 Design for PRM Use \x96 Equipment and Components onboard Rolling Stock \x96 Toilets | |
| Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In... | |
| Railway applications - Wheel/Rail friction management - Part 1-2: Equipment and Application - Top of Rail materials | |
| Railway applications - Wheel/Rail friction management - Part 2-2: Properties and Characteristics - Top of Rail materials | |
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels | |
| Railway applications - Wheelsets and bogies - Part 2: Design method for axles with internal journals | |
| Railway applications - Wheelsets and bogies - Product requirements for cast wheels | |
| Railway applications \x96 Axle design method | |
| Railway applications \x96 Fire protection on railway vehicles \x96 Assessment of fire containment and control systems for railway vehicles | |
| Railway applications \x96 Guidance for the use of simulations \x96 Guidance for the use of simulations to demonstrate compliance with technical and regulatory requirements and on the introduction and development... | |
| Railway applications \x96 Infrastructure \x96 Rail mounted railway maintenance and inspection machines and associated equipment \x96 Explanation of machine type and compliance, including acceptance processes | |
| Railway applications \x96 Track \x96 Noise barriers and related devices acting on airborne sound propagation \x96 Test method for determining the acoustic performance \x96 Part 5: Intrinsic characteristics \x96 In... | |
| Railway applications \x96 Vehicle Maintenance \x96 Guide for identification and management of Safety Critical Components for railway vehicles | |
| Railway Applications \x96 Wheel-rail contact geometry parameters \x96 Technical report and background information about EN 15302 | |
| Railway applications \x96 Wheel/Rail friction management \x96 Part 1-3: Equipment and Application \x96 Adhesion materials | |
| Railway applications \x96 Wheel/Rail friction management \x96 Part 2-3: Properties and Characteristics \x96 Adhesion materials | |
| Rationalized structure for electronic signature standardization \x96 Best practices for SMEs | |
| Rationalized structure for electronic signature standardization \x96 Guidelines for citizens | |
| Requirements for electronic advanced data (EAD) in postal operations, in particular compliant to security and customs requirements | |
| Requirements to connect, access, participate and further develop open global networks and systems, for postal operators and the wider postal sector players | |
| Residential solid fuel burning appliances - Emission test methods | |
| Resilient, textile and laminate floor coverings \x96 Design, preparation and installation \x96 Part 1: General | |
| Resilient, textile and laminate floor coverings \x96 Design, preparation and installation \x96 Part 2: Textile floor coverings | |
| Resilient, textile and laminate floor coverings \x96 Design, preparation and installation \x96 Part 3: Laminate floor coverings | |
| Resilient, textile and laminate floor coverings \x96 Design, preparation and installation \x96 Part 4: Resilient floor coverings | |
| Resilient, textile and laminate floor coverings \x96 Floor covering standard symbols \x96 Complementary element | |
| Resilient, textile, laminate and modular mechanical locked floor coverings \x96 Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR) | |
| Road and airfield surface characteristics - Part 10: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK): The Skiddometer BV-8 | |
| Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM | |
| Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab... | |
| Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph | |
| Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and... | |
| Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG | |
| Road and airfield surface characteristics - Part 1: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR | |
| Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and... | |
| Road and airfield surface characteristics - Part 3: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA): The ADHERA | |
| Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT) | |
| Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and... | |
| Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM\xae | |
| Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester(R) | |
| Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM | |
| Road and airfield surface characteristics - Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer... | |
| Road and airfield surface characteristics - Test methods - Part 2: Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems | |
| Road infrastructure \x96 Automated vehicle interactions \x96 Reference Framework Release 1 | |
| Road restraint systems \x96 General requirements for the competence of laboratories performing virtual testing for the evaluation of vehicle restraint systems | |
| Road restraint systems \x96 Part 7: Performance characterisation and test methods for terminals of safety barriers | |
| Road restraint systems \x96 Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers | |
| Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles - Part 6: Test procedures | |
| Rough-terrain trucks \x96 Safety requirements and verification \x96 Part 8: Variable-reach tractors | |
| Safety and control devices for burners and appliances burning gaseous and/or liquid fuels \x96 Guidance on hydrogen specific aspects | |
| Safety of amusement rides and amusement devices \x96 Replies to requests for interpretation of EN 13814:2019 and its parts | |
| Safety of escalators and moving walks \x96 Part 4: Interpretations related to EN 115 family of standards | |
| Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery | |
| Safety of toys \x96 Mechanical and physical properties \x96 Guidance on categorisation of projectile toys within EN 71-1 | |
| Safety rules for the construction and installation of lifts - Basics and interpretations - Part 10: System of the EN 81 series of standards | |
| Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics | |
| Sawn timber - Method for assessment of case-hardening | |
| Service Modelling Language | |
| Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme | |
| Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS) | |
| Sludge, treated biowaste and soil - Determination of impurities and stones | |
| Sludge, treated biowaste and soil - Determination of linear alkylbenzene sulfonates (LAS) by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD) or mass selective detection (MS) | |
| Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) | |
| Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS) | |
| Sludge, treated biowaste and soil - Determination of specific electrical conductivity | |
| Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules | |
| Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite | |
| Sludge, treated biowaste and soil \x96 Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS) | |
| Sludge, treated biowaste and soil \x96 Determination of elements in aqua regia and nitric acid digests \x96 Flame atomic absorption spectrometry method (FAAS) | |
| Sludge, treated biowaste and soil \x96 Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) | |
| Sludge, treated biowaste and soil \x96 Determination of pharmaceutical products | |
| Smoke and heat control systems \x96 Part 11: Horizontal flow powered ventilation systems for enclosed car parks | |
| Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods | |
| Solid Biofuels - Determination of total content of sulphur and chlorine | |
| Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method | |
| Solid biofuels - Methods for sample preparation | |
| Solid biofuels - Methods for the determination of bulk density | |
| Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above | |
| Solid biofuels - Sampling - Part 1: Methods for sampling | |
| Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries | |
| Solid recovered fuels - Determination of bridging properties of bulk material | |
| Solid recovered fuels - Determination of bulk density | |
| Solid recovered fuels - Determination of density of pellets and briquettes | |
| Solid recovered fuels - Determination of mechanical durability of pellets | |
| Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method | |
| Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture content by a simplified method | |
| Solid recovered fuels - Methods for the determination of metallic aluminium | |
| Space \x96 SBAS receivers performances for maritime applications \x96 MARESS Test report | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport System (ITS) \x96 Specification of the test facilities, definition of test scenarios, description and validation of the procedures for field... | |
| Space \x96 Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) \x96 Field tests definition for basic performance | |
| Space engineering \x96 Adhesive bonding handbook | |
| Space engineering \x96 Assessment of space worst case charging handbook | |
| Space engineering \x96 Buckling of structures | |
| Space engineering \x96 Communication guidelines | |
| Space engineering \x96 Control engineering handbook | |
| Space engineering \x96 Guidelines for electrical design and interface requirements for actuators | |
| Space engineering \x96 Insert design handbook | |
| Space engineering \x96 Mechanical shock design and verification handbook | |
| Space engineering \x96 Software engineering handbook | |
| Space engineering \x96 Spacecraft mechanical loads analysis handbook | |
| Space engineering \x96 Structural materials handbook \x96 Part 1: Overview and material properties and applications | |
| Space engineering \x96 Structural materials handbook \x96 Part 2: Design calculation methods and general design aspects | |
| Space engineering \x96 Structural materials handbook \x96 Part 3: Load transfer and design of joints and design of structures | |
| Space engineering \x96 Structural materials handbook \x96 Part 4: Integrity control, verification guidelines and manufacturing | |
| Space engineering \x96 Structural materials handbook \x96 Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints | |
| Space engineering \x96 Structural materials handbook \x96 Part 6: Fracture and material modelling, case studies and design and integrity control and inspection | |
| Space engineering \x96 Structural materials handbook \x96 Part 7: Thermal and environmental integrity, manufacturing aspects, in-orbit and health monitoring, soft materials, hybrid materials and nanotechnologies | |
| Space engineering \x96 Structural materials handbook \x96 Part 8: Glossary | |
| Space engineering \x96 Thermal analysis handbook | |
| Space engineering \x96 Threaded fasteners handbook | |
| Space product assurance \x96 Components reliability data sources and their use | |
| Space product assurance \x96 Human dependability handbook | |
| Space product assurance \x96 Techniques for radiation effects mitigation in ASICs and FPGAs handbook | |
| Space product assurance \x96 Worst case analysis | |
| Specification for hose couplings for petrol, oil and lubricants - High pressure couplings | |
| Standard method for assessing and improving the energy efficiency of waste water treatment plants | |
| State of the art on the use of flammable refrigerant alternatives, in particular from class A3, in refrigeration, air conditioning and heat pump equipment | |
| Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption | |
| Stationary source emissions \x96 Guideline for the elaboration of standardized measurement methods \x96 Recommendations for the structure and content | |
| Stationary source emissions \x96 Sampling and determination of hydrogen chloride content in ducts and stacks \x96 Infrared analytical technique | |
| Surface active agents \x96 Bio-based surfactants \x96 Overview on bio-based surfactants | |
| Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact | |
| Surfaces for sports areas \x96 Synthetic turf sports facilities \x96 Guidance on how to minimize infill dispersion into the environment | |
| Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance... | |
| Swap bodies for combined transport - Stackable swap bodies type A 1371 - Dimensions, design requirements and testing | |
| Swap bodies for combined transport - Stackable swap bodies type C 745-S16 - Dimensions, design requirements and testing | |
| Synthetic sport systems - Leaching test | |
| Tactile paving surface indicators produced from concrete, clay and stone | |
| Test methods for external fire exposure to roofs | |
| Testing hardened concrete \x96 Part 10: Determination of the relative carbonation resistance of concrete | |
| Testing hardened concrete \x96 Part 9: Freeze-thaw resistance \x96 Scaling | |
| Textile floor coverings \x96 Guidelines for acceptable colour deviations | |
| Textiles and textile products \x96 Textiles with integrated electronics and ICT \x96 Definitions, categorisation, applications and standardisation needs | |
| Textiles for healthcare and social services facilities | |
| Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from... | |
| Thermal Modified Timber - Definitions and characteristics | |
| Thermoplastics piping and ducting systems \x96 Outside the building structures for gravity and pressurised systems \x96 Trench installation | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 1: General specifications | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 2: Numbering and ADP messsage header | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 3: Basic information elements | |
| Traffic and Travel information (TTI) - TTI messages via cellular networks - Part 4: Service-independent protocols | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 5: Internal services | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 6: External services | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 7: Performance requirements for onboard positioning | |
| Traffic and Travel Information (TTI) - TTI messages via cellular networks - Part 8: GSM-specific parameters | |
| Unfired pressure vessels \x96 Part 501: Acoustic emission for pressure vessels | |
| Use of plugs of bulk material in screw conveyors and product receivers for explosion isolation | |
| Ventilation in hospitals \x96 Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals | |
| Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry | |
| Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds | |
| Winter and road service area maintenance equipment - Data acquisition and transmission - Part 2: Protocol for data transfer between information supplier and client application server | |
| Winter and road service area maintenance equipment - Solid absorbents intended for road usage | |
| Winter maintenance equipment \x96 Road weather information systems \x96 Part 4: Test methods for stationary equipment | |
| Winter maintenance equipment \x96 Spreading machines (gritting machines) \x96 Part 2: Requirements for distribution and its test | |
| Wood flooring - Slip resistance - Pendulum test | |
| Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test | |
| Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test | |
| Wood preservatives \x96 Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact \x96 Horizontal lap-joint method | |
| Wood-based panels - Floating floors - Part 2: Test methods | |
| Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs | |
| Wood-based panels - Small scale indicative test methods for certain mechanical properties | |
| Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials | |
| Workplace exposure - Measurement of dermal exposure - Principles and methods |
| << Prev | Next >> |