Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
600
610
620
630
640
650
651
652
653
654
655
656
657
658
659
660
661
662
663
670
680
690
700
710
720
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Access control system for the MAC/packet family: EUROCRYPT | |
| Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content | |
| Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete | |
| Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures | |
| Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures | |
| Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test | |
| Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing | |
| Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time | |
| Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete | |
| Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption | |
| Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis | |
| Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content | |
| Admixtures for concrete, mortar and grout \x96 Test methods \x96 Part 15: Reference concrete and method for testing viscosity modifying admixtures | |
| Aerospace series - Acid pickling of aluminum and aluminum alloy without hexavalent chromium | |
| Aerospace series - Circuit breakers, single and three poles dummies - Product standard | |
| Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4531 contacts - Part 001: Technical specification | |
| Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard | |
| Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4639-10X contacts - Part 001: Technical specification | |
| Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4639-10X contacts - Part 002: Specification of performance | |
| Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4639-10X contacts - Part 003: Module - Product standard | |
| Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4639-10X contacts - Part 004: Extraction tool - Product standard | |
| Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use | |
| Aerospace series - General and installation requirements for passenger seat fittings | |
| Aerospace series - Passive HF RFID tags intended for aircraft use | |
| Aerospace series - Passive UHF RFID tags intended for aircraft use | |
| Aerospace series - Quick release fastening systems for non-structural applications - Part 02: Spring clamp stud combination | |
| Aerospace series - Quick release fastening systems for non-structural applications - Part 04: Spring clamp - One way tolerance compensation | |
| Aerospace series - Quick release fastening systems for non-structural applications - Part 05: Spring clamp - Two ways tolerance compensation | |
| Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking | |
| Aerospace series - Quick release fastening systems for non-structural applications - Part 07: Retaining grommet | |
| Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats | |
| Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip | |
| Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube | |
| Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire | |
| Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock | |
| Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings | |
| Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock | |
| Aerospace series - Tartaric-Sulphuric-A cid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings | |
| Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings | |
| Aerospace series \x96 Acceptance of the cosmetic variations in appearance of aircraft cabin parts | |
| Aerospace series \x96 Acceptance parameters of aesthetical variations for all visible equipment installed in aircraft cabins under all contractual variations | |
| Aerospace series \x96 Adaptor, Pipe coupling 24\xb0 Cone up to 35 000 kPa (5 080 psi) Port for Ring locked fitting \x96 Inch Series \x96 Geometric configuration | |
| Aerospace series \x96 Adaptor, Pipe coupling 24\xb0 Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting \x96 Reducer \x96 Flareless End \x96 Inch Series \x96 Extra Fine Thread... | |
| Aerospace series \x96 Adaptor, Pipe coupling 24\xb0 Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer \x96 Inch Series \x96 Technical specification | |
| Aerospace series \x96 Aluminium alloy 5086 \x96 H111 \x96 Extruded bars \x96 10 mm = D = 300 mm | |
| Aerospace series \x96 Anodic electrodeposition of hexavalent chromium free primer | |
| Aerospace series \x96 Arc Fault Circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A \x96 115 V a.c. 400 Hz Constant Frequency \x96 Part 001: Technical specification... | |
| Aerospace series \x96 Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A \x96 115 V a.c. 400 Hz constant frequency \x96 Part 004: With signal... | |
| Aerospace series \x96 Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A \x96 115 V a.c. 400 Hz Constant Frequency \x96 Part 005: With polarized... | |
| Aerospace series \x96 Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency \x96 Part 003: Without auxiliary contacts... | |
| Aerospace series \x96 Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A \x96 115 V a.c. 400 Hz constant frequency \x96 Part 001: Technical specification... | |
| Aerospace series \x96 Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions,... | |
| Aerospace series \x96 Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions... | |
| Aerospace Series \x96 Commercial aircraft passenger seats \x96 Reliability testing | |
| Aerospace series \x96 Connectors, optical, rectangular, modular, operating temperature 125 \xb0C, for EN 4531-101 contacts \x96 Part 002: Specification of performance | |
| Aerospace series \x96 Definitions of imperfections and defects in organic matrix composite materials | |
| Aerospace series \x96 ECO efficiency of catering equipment \x96 Part 02: Oven equipment | |
| Aerospace series \x96 Environmental testing \x96 High dynamic abrasion, mar, scratch and punch test in cabin interior | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 001: Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 101: Multimode male termini size 16 \x96 Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 102: Multimode female termini size 16 \x96 Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 103: Multimode male termini size 12 \x96 Technical specification | |
| Aerospace series \x96 Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities \x96 Part 104: Multimode female termini size 12 \x96 Technical specification | |
| Aerospace series \x96 External spiral drive heads for threaded fasteners \x96 Geometrical definition and fastener head wrenching configuration | |
| Aerospace series \x96 Externally threaded fastener, 100\xb0 countersunk normal head, Spiral Drive Recess \x96 Classification: 1 100 MPa (at ambient temperature)/425 \xb0C | |
| Aerospace series \x96 Filler metals for welding \x96 Part 001: Technical specification | |
| Aerospace series \x96 Filler metals for welding \x96 Part 002: Authorized filler metals | |
| Aerospace series \x96 Flange couplings \x96 Cap, in heat resisting steel \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Gasket seal with nickel alloy C seal \x96 Technical specification \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Swivel flange with 3 fastening holes, in heat resisting steel \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Swivel flange with 3 fastening holes, in nickel alloy \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Swivel flange with 4 fastening holes, in heat resisting steel \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Weld coupling, 90\xb0 elbow, in heat resisting steel \x96 Inch series | |
| Aerospace series \x96 Flange couplings \x96 Weld coupling, 90\xb0 elbow, in nickel alloy \x96 Inch series | |
| Aerospace series \x96 Flange couplings up to 21 000 kPa \x96 Technical specification \x96 Inch series | |
| Aerospace series \x96 General technical specification for standard parts | |
| Aerospace series \x96 Heat shrinkable moulded shapes \x96 Part 002: Index of product standards and product dimensions | |
| Aerospace series \x96 Heat shrinkable moulded shapes \x96 Part 101: Polyolefin, semi-rigid, limited fire hazard \x96 Temperature range \x96 30 \xb0C to 105 \xb0C \x96 Product standard | |
| Aerospace series \x96 Heat shrinkable moulded shapes \x96 Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 \xb0C \x96 Product Standard | |
| Aerospace series \x96 Heat-shrinkable moulded shapes \x96 Part 103: Fluoroelastomeric, temperature range -55 \xb0C to 200 \xb0C \x96 Product standard | |
| Aerospace series \x96 Hexavalent chromium free anodizing of aluminium and aluminium alloys | |
| Aerospace series \x96 Installation and removal requirements for Ring locked fitting and reducer, 24\xb0 Cone up to 35 000 kPa (5 080 psi) \x96 Inch Series | |
| Aerospace series \x96 Laser surface marking by discoloration | |
| Aerospace series \x96 LED colour and brightness ranking | |
| Aerospace series \x96 Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment | |
| Aerospace series \x96 Metrological assessment procedure for kinematic fields measured by digital image correlation | |
| Aerospace series \x96 Micro-arc oxidation of aluminium and aluminium alloys | |
| Aerospace series \x96 Pipe coupling 24\xb0 Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting \x96 Flareless End \x96 Inch Series \x96 Extra Fine Thread Pitch | |
| Aerospace series \x96 Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) \x96 Stock shape material \x96 Material specification | |
| Aerospace series \x96 Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) \x96 Stock shape material \x96 Material specification | |
| Aerospace series \x96 Quick release fastening systems for non-structural and lining applications \x96 Part 02: Spring clamp stud combination | |
| Aerospace series \x96 Quick release fastening systems for non-structural and lining applications \x96 Part 03: Stud \x96 quick-release and locking | |
| Aerospace series \x96 Quick release fastening systems for non-structural and lining applications \x96 Part 04: Spring clamp | |
| Aerospace series \x96 Quick release fastening systems for non-structural and lining applications \x96 Part 05: Retaining washer | |
| Aerospace series \x96 Quick release fastening systems for non-structural applications \x96 Part 01: Technical specification | |
| Aerospace series \x96 Quick release fastening systems for non-structural applications \x96 Part 03: Spring clamp | |
| Aerospace series \x96 Rotorcraft constant wear lifejackets \x96 Requirements, testing and marking | |
| Aerospace series \x96 Rotorcraft Emergency Breathing Systems (EBS) \x96 Requirements, testing and marking | |
| Aerospace series \x96 Rotorcraft immersion suits \x96 Requirements, testing and marking | |
| Aerospace series \x96 Screw, 100\xb0 countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated \x96 Classification: 1 100 MPa (at ambient... | |
| Aerospace series \x96 Screw, 100\xb0 countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated \x96 Classification: 1 100 MPa (at ambient temperature)/235... | |
| Aerospace series \x96 Screw, 100\xb0 countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated \x96 Classification: 1 100 MPa (at ambient... | |
| Aerospace series \x96 Screw, 100\xb0 countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated \x96 Classification: 900 MPa (at ambient temperature)/650 \xb0C | |
| Aerospace series \x96 Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated \x96 Classification: 1 100 MPa (at ambient temperature)/235 \xb0C... | |
| Aerospace series \x96 Screw, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated \x96 Classification: 1 100 MPa (at ambient temperature)/315... | |
| Aerospace series \x96 Screws, 100\xb0 countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated \x96 Classification: 1 100 MPa (at ambient temperature) /... | |
| Aerospace series \x96 Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated \x96 Classification: 1 100 MPa (at ambient temperature) / 425 \xb0C... | |
| Aerospace series \x96 Sensor based clamp load determination / high tensile bolts \x96 Technical specification | |
| Aerospace series \x96 Shock mount with bushes \x96 Part 1: Technical specification | |
| Aerospace series \x96 Shock mount with bushes \x96 Part 2: Technical overview | |
| Aerospace series \x96 Sleeves, heat-shrinkable, for binding, insulation and identification \x96 Part 201: Polyolefin identification sleeves \x96 Operating Temperature range -55 \xb0C to 135 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 001: Technical specification | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 002: Index of Product standards | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 101: Polyolefin sleeving \x96 Operating temperatures -55 \xb0C to 135 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 102: Very flexible polymer \x96 Operating temperature \x96 75 \xb0C to 150 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 103: Fluoroelastomer sleeves \x96 Operating temperature -55 \xb0C to 200 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 104: Semi-rigid polyvinylidene fluoride (PDVF) \x96 Operating temperature -55 \xb0C to 175 \xb0C \x96 Product Standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 105: Semi-flexible polyvinylidene fluoride (PVDF) \x96 Temperature range \x96 55 \xb0C to 150 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 106: Limited fire hazard sleeving \x96 Operating temperatures \x96 30 \xb0C to 105 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 107: Polytetrafluoroethyl ene (PTFE) \x96 Operating temperatures \x96 65 \xb0C to 260 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 108: Limited fire hazard sleeving \x96 Operating temperatures \x96 65 \xb0C to 150 \xb0C \x96 Product standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 203: polyvinylidene fluoride (PVDF) Identification sleeves \x96 Operating Temperature range -55\xbaC to 225\xbaC \x96 Product Standard | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 204: Limited fire hazard identification sleeves \x96 Operating Temperature range -40 \xb0C to 105 \xb0C \x96 Product standard... | |
| Aerospace series \x96 Sleeving, heat-shrinkable, for binding, insulation and identification \x96 Part 301: Adhesive lined polyolefin sleevings \x96 Operating temperature \x96 55 \xb0C to 105 \xb0C \x96 Product Standard | |
| Aerospace series \x96 Spectral quality of LED luminaires used with photoluminescent marking systems | |
| Aerospace series \x96 Standardized passenger seat weight information | |
| Aerospace series \x96 Steel 36NiCrMo16 (1.6773) \x96 1 000 MPa = Rm = 1 200 MPa \x96 Bars \x96 100 mm = D = 250 mm | |
| Aerospace series \x96 Steel and heat resisting alloys \x96 Wrought products \x96 Technical specification \x96 Part 002: Bar and section | |
| Aerospace series \x96 Steel X12CrNiMoV12-3 (1.4938) \x96 Air melted and consumable electrode remelted \x96 Hardened and tempered \x96 Bars \x96 De = 150 mm \x96 900 MPa = Rm =... | |
| Aerospace series \x96 Steel X3CrNiMoAl (1.4534) \x96 Vacuum induction melted and consumable electrode remelted \x96 Solution treated and precipitation treated \x96 Bars for machining \x96 a or D = 200... | |
| Aerospace series \x96 Steel X4CrNiMo16-5-1 \x96 Air melted \x96 Hardened and tempered \x96 Sheets and plates \x96 0,3 mm = a = 50 mm \x96 900 MPa = Rm =... | |
| Aerospace series \x96 Steel X5CrNiCu 17-4 (1.4542) \x96 Air melted \x96 Solution treated and precipitation treated \x96 Plates \x96 6 mm = a = 100 mm \x96 Rm = 1... | |
| Aerospace series \x96 Steel X5CrNiCu 17-4 (1.4542) \x96 Air melted \x96 Solution treated and precipitation treated \x96 Sheets and strips \x96 a = 6 mm \x96 Rm = 1 070... | |
| Aerospace series \x96 Surface treatments \x96 Test method for measurement of electrical contact resistance | |
| Aerospace series \x96 Test specification for verification of the permeability of electrical insulation | |
| Aerospace series \x96 Thermal drift of LED luminaires \x96 Classification and measuring methods | |
| Aerospace series \x96 Tie Rod with integrated bolts -Locking clip | |
| Aerospace series \x96 Tie rod with integrated bolts \x96 Assembly code A, B and C | |
| Aerospace series \x96 Tie rod with integrated bolts \x96 Assembly code D, E and F | |
| Aerospace series \x96 Tie Rod with integrated bolts \x96 Assembly Code G, H and K | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 001: Plate, sheet and strip | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 002: Bar and section | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 003: Tube | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 004: Wire | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 005: Forging stock | |
| Aerospace series \x96 Titanium and titanium alloys \x96 Technical specification \x96 Part 007: Remelting stock | |
| Aerospace series \x96 Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys | |
| Aerospace series \x96 Unmanned Aircraft Systems \x96 Part 002: Direct Remote identification | |
| Aerospace series \x96 X5CrNiCu15-5 (1.4545) \x96 Consumable electrode remelted (ESR or VAR) \x96 Solution treated and precipitation treated (H1025) \x96 Bar for machining \x96 a or D = 250 mm... | |
| Alarm systems - Access control systems for use in security applications - Part 1: System requirements | |
| Alarm systems - Alarm transmission systems and equipment - Part 1-1: General requirements for alarm transmission systems | |
| Alarm systems - Alarm transmission systems and equipment - Part 1-2: Requirements for systems using dedicated alarm paths | |
| Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems | |
| Alarm systems - Alarm transmission systems and equipment -- Part 1-1: General requirements for alarm transmission systems | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 1: System requirements | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5-1: Video transmission - General video transmission performance requirements | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5-2: IP Video Transmission Protocols | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5-3: Video transmission - Analogue and digital video transmission | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 5: Video transmission | |
| Alarm systems - CCTV surveillance systems for use in security applications - Part 7: Application guidelines | |
| Alarm systems - Intrusion and hold-up systems - Part 1: System requirements | |
| Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors | |
| Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) | |
| Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment | |
| Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices | |
| Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems | |
| Alarm systems - Part 5: Environmental test methods | |
| Alarm systems - Social alarm systems - Part 1: System requirements | |
| Alarm systems - Social alarm systems - Part 3: Local unit and controller | |
| Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 13: Pyrotechnic Obscuration Security Devices | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 1: System requirements | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-10: Intrusion detectors \x96 Lock state contacts (magnetic) | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-2: Intrusion detectors \x96 Passive infrared detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-3: Requirements for microwave detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-4: Requirements for combined passive infrared and microwave detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 2-8: Intrusion detectors \x96 Shock detectors | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 6: Power supplies | |
| Alarm systems \x96 Intrusion and hold-up systems \x96 Part 8: Security fog device/systems | |
| Alarm systems \x96 Intrusion systems \x96 Part 5-3: Requirements for interconnections equipment using radio frequency techniques \x96 Interpretation of Subclause 5.1.6 | |
| Alarm systems \x96 Intrusion systems \x96 Part 5-3: Requirements for interconnections equipment using radio frequency techniques | |
| Alarm systems \x96 Social alarm systems -- Part 5: Interconnections and communications | |
| Alarm systems \x96 Social alarm systems \x96 Part 2: Trigger devices | |
| Alarm systems \x96 Social alarm systems \x96 Part 7: Application guidelines | |
| Aluminium and aluminium alloys - Extrusion ingots - Specifications | |
| Aluminium and aluminium alloys - Rolling ingots - Specifications | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products | |
| Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products | |
| Aluminium and aluminium alloys \x96 Sheet, strip and plate \x96 Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys \x96 Sheet, strip and plate \x96 Part 2: Mechanical properties | |
| Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks | |
| Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 2: Electromagnetic compatibility for equipment | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-4: Particular requirements for service poles and service posts | |
| Cast aluminium alloy enclosures for gas-filled high voltage switchgear and controlgear | |
| Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear | |
| Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear | |
| Coaxial cables -- Part 2-1: Sectional specification for cables used in cabled distribution networks \x96 Indoor drop cables for systems operating at 5 MHz \x96 1 000 MHz | |
| Coaxial cables -- Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000... | |
| Coaxial cables \x96 Part 10-1: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Outdoor drop cables for systems operating at 5 MHz \x96 1 000 MHz... | |
| Coaxial cables \x96 Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Outdoor drop cables for systems operating at 5 MHz \x96 3 000 MHz... | |
| Coaxial cables \x96 Part 11-1: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Distribution and trunk cables for systems operating at 5 MHz \x96 1 000... | |
| Coaxial cables \x96 Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Distribution and trunk cables for systems operating at 5 MHz \x96 2 000... | |
| Coaxial cables \x96 Part 1: Generic specification | |
| Coaxial cables \x96 Part 2-1: Sectional specification for cables used in cabled distribution networks \x96 Indoor drop cables for systems operating at 5 MHz \x96 1 000 MHz | |
| Coaxial cables \x96 Part 2-2: Sectional specification for cables used in cabled distribution networks \x96 Outdoor drop cables for systems operating at 5 MHz \x96 1 000 MHz | |
| Coaxial cables \x96 Part 2-2: Sectional specification for cables used in cabled distribution networks \x96 Outdoor drop cables for systems operating at 5 MHz \x96 1000 MHz | |
| Coaxial cables \x96 Part 2-3: Sectional specification for cables used in cabled distribution networks \x96 Distribution and trunk cables for systems operating at 5 MHz \x96 1 000 MHz | |
| Coaxial cables \x96 Part 2-3: Sectional specification for cables used in cabled distribution networks \x96 Distribution and trunk cables for systems operating at 5 MHz \x96 1000 MHz | |
| Coaxial cables \x96 Part 2-5: Sectional specification for cables used in cabled distribution networks \x96 Outdoor drop cables for systems operating at 5 MHz \x96 3 000 MHz | |
| Coaxial cables \x96 Part 2-5: Sectional specification for cables used in cabled distribution networks \x96 Outdoor drop cables for systems operating at 5 MHz \x96 3000 MHz | |
| Coaxial cables \x96 Part 3-1: Sectional specifications for cables used in Telecom applications \x96 Miniaturized cables used in digital communication systems | |
| Coaxial cables \x96 Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 \x96 Indoor drop cables for systems operating at 5 MHz \x96 3 000... | |
| Coaxial cables \x96 Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks | |
| Coaxial cables \x96 Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Indoor drop cables for systems operating at 5 MHz \x96 1 000 MHz... | |
| Coaxial cables \x96 Part 9-2: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Indoor drop cables for systems operating at 5 MHz \x96 3 000 MHz... | |
| Coaxial cables \x96 Part 9-3: Sectional specification for coaxial cables for analogue and digital signal transmission \x96 Indoor drop cables for systems operating at 5 MHz \x96 6 000 MHz... | |
| Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables | |
| Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables | |
| Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz | |
| Coaxial cables used in cabled distribution networks. Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz | |
| Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods | |
| Concrete roofing tiles and fittings for roof covering and wall cladding \x96 Product specifications | |
| Customer premises cabling for Information Technology - Part 1: ISDN basic access | |
| Customer premises cabling for Information Technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface | |
| Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) | |
| District heating pipes \x96 Bonded single and twin pipe systems for buried hot water networks \x96 Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance... | |
| District heating pipes \x96 Bonded single pipe systems for directly buried hot water networks \x96 Part 1: Factory made steel shut-off valve assembly for steel service pipes, polyurethane thermal insulation... | |
| District heating pipes \x96 Preinsulated bonded pipe systems for directly buried hot water networks \x96 Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene | |
| District heating pipes \x96 Preinsulated bonded pipe systems for directly buried hot water networks \x96 Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene... | |
| Domestic and similar electronic equipment interconnection requirements: Peritelevision connector | |
| Earth-moving machinery - Safety - Part 1: General requirements | |
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators | |
| Earth-moving machinery \x96 Safety \x96 Part 10: Requirements for trenchers | |
| Earth-moving machinery \x96 Safety \x96 Part 11: Requirements for earth and landfill compactors | |
| Earth-moving machinery \x96 Safety \x96 Part 11: Requirements for earth- and landfill compactors | |
| Earth-moving machinery \x96 Safety \x96 Part 12: Requirements for cable excavators | |
| Earth-moving machinery \x96 Safety \x96 Part 13: Requirements for rollers | |
| Earth-moving machinery \x96 Safety \x96 Part 1: General requirements | |
| Earth-moving machinery \x96 Safety \x96 Part 2: Requirements for tractor-dozers | |
| Earth-moving machinery \x96 Safety \x96 Part 3: Requirements for loaders | |
| Earth-moving machinery \x96 Safety \x96 Part 4: Requirements for backhoe loaders | |
| Earth-moving machinery \x96 Safety \x96 Part 5: Requirements for hydraulic excavators | |
| Earth-moving machinery \x96 Safety \x96 Part 6: Requirements for dumpers | |
| Earth-moving machinery \x96 Safety \x96 Part 7: Requirements for scrapers | |
| Earth-moving machinery \x96 Safety \x96 Part 8: Requirements for graders | |
| Earth-moving machinery \x96 Safety \x96 Part 9: Requirements for pipelayers | |
| Electrical apparatus for potentially explosive atmospheres - Encapsulation "m" | |
| Electrical apparatus for potentially explosive atmospheres - Flameproof enclosure "d" | |
| Electrical apparatus for potentially explosive atmospheres - Type of protection "n" | |
| Electrical equipment for the detection and measurement of oxygen \x96 Performance requirements and test methods | |
| Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment | |
| Electromagnetic compatibility - Generic emission standard Part 1: Residential, commercial and light industry | |
| Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry | |
| Electrostatic hand-held spraying equipment \x96 Safety requirements \x96 Part 1: Hand-held spraying equipment for ignitable liquid coating materials | |
| Electrostatic hand-held spraying equipment \x96 Safety requirements \x96 Part 2: Hand-held spraying equipment for ignitable coating powder | |
| Electrostatic hand-held spraying equipment \x96 Safety requirements \x96 Part 3: Hand-held spraying equipment for ignitable flock | |
| Fibre-cement profiled sheets and fittings \x96 Product specification and test methods | |
| Fibre-cement slates and fittings \x96 Product specification and test methods | |
| Fixed installations for railway applications \x96 Electrical safety, earthing and the return circuit \x96 Part 3: Mutual Interaction of AC and DC traction systems | |
| Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes | |
| Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing | |
| Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW | |
| General requirements for components used in drains and sewers | |
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests | |
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors... | |
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors... | |
| Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors... | |
| Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF... | |
| Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax... | |
| High-voltage switchgear and controlgear \x96 Gas-filled cast aluminium alloy enclosures | |
| High-voltage switchgear and controlgear \x96 Gas-filled wrought aluminium and aluminium alloy enclosures | |
| Home and Building Electronic Systems (HBES) - Part 1: Standardization structure | |
| Home and Building Electronic Systems (HBES) - Part 3-1: Aspects of application - Introduction to the application structure | |
| Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) - Part 3-3: Aspects of application - HBES Interworking model and common HBES data types | |
| Home and Building Electronic Systems (HBES) - Part 4-1: Media independent layers - Application layer for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) - Part 4-2: Media independent layers - Transport layer, network layer and general parts of data link layer for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio Frequency for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) - Part 7-1: System management - Management procedures | |
| Home and Building Electronic Systems (HBES) \x96 Part 3-4: Secure Application Layer, Secure Service, Secure configuration and security Resources | |
| Home and Building Electronic Systems (HBES) \x96 Part 4-3: Media independent layers \x96 Communication over IP | |
| Home and Building Electronic Systems (HBES) \x96 Part 4-4: HBES IoT Point API | |
| Home and Building Electronic Systems (HBES) \x96 Part 5-1: Media and media dependent layers \x96 Power line for HBES Class 1 | |
| Home and Building Electronic Systems (HBES) \x96 Part 5-2: Media and media dependent layers \x96 Network based on HBES Class 1, Twisted Pair | |
| Home and Building Electronic Systems (HBES) \x96 Part 6-1: Interfaces \x96 Webservice interface | |
| Home and Building Electronic Systems (HBES) \x96 Part 6-2: IoT Semantic Ontology model description | |
| Home and Building Electronic Systems (HBES) \x96 Part 6-3: 3rd Party HBES IoT API | |
| Home and Building Electronic Systems (HBES) \x96 Part 8: Conformity assessment of products | |
| Low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number - General rules | |
| Low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for particular control switches | |
| Low-profile connector for implantable cardiac pacemakers | |
| Low-voltage switchgear and controlgear \x96 Control switches \x96 Position switches 30 \xd7 55 \x96 Dimensions and characteristics | |
| Low-voltage switchgear and controlgear for industrial use \x96 Control switches \x96 Position switches 42,5 \xd7 80 \x96 Dimensions and characteristics | |
| Medical devices - Electrically-generat ed alarm signals | |
| Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines | |
| Mobile road construction machinery \x96 Safety \x96 Part 1: Common requirements | |
| Mobile road construction machinery \x96 Safety \x96 Part 2: Specific requirements for road-milling machines | |
| Mobile road construction machinery \x96 Safety \x96 Part 3: Specific requirements for soil-stabilising machines and recycling machines | |
| Mobile road construction machinery \x96 Safety \x96 Part 6: Specific requirements for paver-finishers | |
| Non-destructive testing - Qualification and certification of NDT personnel - General principles | |
| Operation of electrical installations \x96 Part 1: General requirements | |
| Operation of electrical installations \x96 Part 2: National annexes | |
| Operation of electrical installations | |
| Plastics \x96 Poly(vinyl chloride) (PVC) based profiles \x96 Determination of the appearance after exposure at 150 \xb0C | |
| Preinsulated bonded pipe systems for underground hot water networks \x96 Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene (PE) | |
| Pressure gauges - Vocabulary | |
| Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general... | |
| Protective clothing for firefighters \x96 Performance requirements for protective clothing for firefighting | |
| Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling | |
| Railway applications - Fixed installations - D.C. switchgear - Part 1: General | |
| Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers | |
| Railway applications - Fixed installations - D.C. switchgear - Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches | |
| Railway applications - Fixed installations - D.C. switchgear - Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches | |
| Railway applications - Fixed installations - D.C. switchgear - Part 6: D.C. switchgear assemblies | |
| Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide | |
| Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current... | |
| Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage... | |
| Railway applications - Fixed installations - D.C. switchgear- Part 6: D.C. switchgear assemblies | |
| Railway applications - Fixed installations - Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems | |
| Railway applications - Insulation coordination - Part 2: Overvoltages and related protection | |
| Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS) | |
| Railway applications \x96 Communication, signalling and processing systems \x96 Safety related electronic systems for signalling | |
| Railway applications \x96 Communication, signalling and processing systems \x96 Software for railway control and protection systems | |
| Railway applications \x96 Communications, signalling and processing systems \x96 Software for railway control and protection systems | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 1: General | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 2: Emission of the whole railway system to the outside world | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 3-1: Rolling stock \x96 Train and complete vehicle | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 3-2: Rolling stock \x96 Apparatus | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Railway applications \x96 Environmental conditions for equipment \x96 Part 1: Equipment on board rolling stock | |
| Railway applications \x96 Environmental conditions for equipment \x96 Part 2: Fixed electrical installations | |
| Railway applications \x96 Environmental conditions for equipment \x96 Part 3: Equipment for signalling and telecommunications | |
| Railway applications \x96 Fixed installations \x96 Electric traction overhead contact lines | |
| Railway applications \x96 Fixed installations \x96 Electrical safety, earthing and the return circuit \x96 Part 1: Protective provisions against electric shock | |
| Railway applications \x96 Fixed installations \x96 Electrical safety, earthing and the return circuit \x96 Part 3: Mutual Interaction of a.c. and d.c. traction systems | |
| Railway applications \x96 Insulation coordination \x96 Part 1: Basic requirements \x96 Clearances and creepage distances for all electrical and electronic equipment | |
| Railway applications \x96 Insulation coordination \x96 Part 2: Overvoltages and related protection | |
| Railway Applications \x96 The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) \x96 Part 1: Generic RAMS Process | |
| Railway Applications \x96 The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) \x96 Part 2: Systems Approach to Safety | |
| Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet | |
| Safety of household and similar electrical appliances \x96 Particular rules for routine tests referring to appliances under the scope of EN 60335-1 | |
| Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-2: Low voltage decoupling filters \x96 Safety requirements | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of... | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of... | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 2-3: Immunity requirements for mains communicating equipment operating in the range of frequencies 3... | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of... | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-1: Low voltage decoupling filters \x96 Generic specification | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-3: Low voltage decoupling filter \x96 Incoming filter | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-4: Low voltage decoupling filter \x96 Impedance filter | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-5: Low voltage decoupling filter \x96 Segmentation filter | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz \x96 Part 4-6: Low voltage decoupling filters \x96 Phase coupler | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz \x96 Part 4-2: Low voltage decoupling filters \x96 Safety requirements... | |
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz \x96 Part 4-7: Portable low voltage decoupling filters \x96 Safety... | |
| Signs and luminous-discharge-t ube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 1: General requirements | |
| Signs and luminous-discharge-t ube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 2: Requirements for earth-leakage and open-circuit protective devices... | |
| Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included | |
| Specification for dedicated liquefied petroleum gas appliances \x96 Independent hotplates, including those incorporating a grill for outdoor use | |
| Specification for dedicated liquefied petroleum gas appliances \x96 Independent stoves, including those incorporating a grill for outdoor use | |
| Specification for dedicated liquefied petroleum gas appliances \x96 Multi purpose boiling burners for outdoor use | |
| Specification for electrostatic hand-held spraying equipment for non- flammable material for painting and finishing | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors \x96 Determination of heat reversion | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors \x96 Determination of the resistance to impact of main profiles by falling mass | |
| Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear | |
| Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) | |
| Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application by impregnation (Laboratory method) | |
| Wood preservatives \x96 Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival \x96 Part 1: Application by surface treatment (Laboratory method) | |
| Wood preservatives \x96 Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) \x96 (Laboratory method) | |
| Workplace atmospheres - Size fraction definitions for measurement of airborne particles | |
| Workplace exposure \x96 General requirements for the performance of procedures for the measurement of chemical agents | |
| Workplace exposure \x96 Procedures for the determination of the concentration of chemical agents \x96 Basic performance requirements | |
| Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear | |
| Wrought steel enclosures for gas-filled high-voltage switchgear and controlgear | |
| Wrought steel enclosures for gas-filled highvoltage switchgear and controlgear |
| << Prev | Next >> |