Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
630
640
650
660
670
680
682
683
684
685
686
687
688
689
690
691
692
693
694
700
710
720
730
740
750
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture | |
| Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs | |
| Acoustics \x96 Declaration and verification of noise emission values of machinery and equipment | |
| Acoustics \x96 Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room | |
| Acoustics \x96 Determination of sound power radiated into a duct by fans and other air-moving devices \x96 In-duct method | |
| Acoustics \x96 Determination of uncertainties associated with sound emission measures \x96 Part 1: Sound power levels determined from sound pressure measurements (ISO 5114-1:2024) | |
| Acoustics \x96 Hearing protectors \x96 Part 1: Subjective method for the measurement of sound attenuation (ISO 4869-1:2018) | |
| Acoustics \x96 Hearing protectors \x96 Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn | |
| Additive manufacturing \x96 Design \x96 Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019) | |
| Adhesives \x96 Installation of floor coverings, wood flooring, levelling compounds and tiles \x96 Specification of trowel notch sizes (ISO 6076:2023) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors | |
| Anaesthetic and respiratory equipment \x96 Breathing sets and connectors | |
| Anaesthetic and respiratory equipment \x96 Conical connectors \x96 Part 2: Screw-threaded weight-bearing connectors \x96 Amendment 1 (ISO 5356-2:2012/Amd 1:2019) | |
| Anaesthetic and respiratory equipment \x96 Oropharyngeal airways (ISO 5364:2016) | |
| Anaesthetic and respiratory equipment \x96 Tracheal tubes and connectors (ISO 5361:2023) | |
| Anaesthetic and respiratory equipment \x96 Tracheostomy tubes and connectors (ISO 5366:2016) | |
| Anaesthetic reservoir bags (ISO 5362:2006) | |
| Anaesthetic vaporizers - Agent-specific filling systems | |
| Animal and vegetable fats and oils - Determination of anisidine value | |
| Animal and vegetable fats and oils - Determination of oxidative stability (accelerated oxidation test) | |
| Animal and vegetable fats and oils - Determination of the composition of fatty acids in the 2-position of the triglycerides molecules | |
| Animal and vegetable fats and oils - Preparation of test sample | |
| Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks | |
| Animal and vegetable fats and oils - Sampling | |
| Animal and vegetable fats and oils \x96 Analysis by gas chromatography of methyl esters of fatty acids | |
| Animal and vegetable fats and oils \x96 Determination of acid value and acidity | |
| Animal and vegetable fats and oils \x96 Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017) | |
| Animal and vegetable fats and oils \x96 Determination of insoluble impurities content | |
| Animal and vegetable fats and oils \x96 Determination of moisture and volatile matter content | |
| Animal and vegetable fats and oils \x96 Determination of refractive index (ISO 6320:2017) | |
| Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion and steam distillation method | |
| Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry | |
| Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography | |
| Animal feeding stuffs - Guidelines for sample preparation | |
| Animal feeding stuffs - Sampling | |
| Animal vegetable fats and oils \x96 Determination of melting point in open capillary tubes (slip point) | |
| Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments | |
| Anodizing of aluminium and its alloys \x96 Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings | |
| Arc welding and cutting - Nonconsumable tungsten electrodes - Classification | |
| Assembly tools for screws and nuts \x96 Hand torque tools \x96 Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance... | |
| Assembly tools for screws and nuts \x96 Hand torque tools \x96 Part 2: Requirements for calibration and determination of measurement uncertainly (ISO 6789-2:2017) | |
| Assembly tools for screws and nuts \x96 Hand torque tools \x96 Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure | |
| Automatic steam traps \x96 Marking (ISO 6553:2016) | |
| Automatic steam traps \x96 Production and performance characteristic tests (ISO 5117:2023) | |
| Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test | |
| Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content | |
| Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content | |
| Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content | |
| Binders for paints and varnishes \x96 Determination of hydroxyl value \x96 Part 1: Titrimetric method without using a catalyst | |
| Binders for paints and varnishes \x96 Determination of hydroxyl value \x96 Part 2: Titrimetric method using a catalyst | |
| Binders for paints and varnishes \x96 Determination of hydroxyl value \x96 Part 3: Rapid test (ISO 4629-3:2018) | |
| Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing | |
| Camping tents | |
| Cardiovascular implants - Cardiac valve prostheses | |
| Cardiovascular implants \x96 Cardiac valve prostheses \x96 Part 1: General requirements \x96 Amendment 1 (ISO 5840-1:2021/Amd 1:2025) | |
| Cardiovascular implants \x96 Cardiac valve prostheses \x96 Part 1: General requirements | |
| Cardiovascular implants \x96 Cardiac valve prostheses \x96 Part 2: Surgically implanted heart valve substitutes \x96 Amendment 1 (ISO 5840-2:2021/Amd 1:2025) | |
| Cardiovascular implants \x96 Cardiac valve prostheses \x96 Part 2: Surgically implanted heart valve substitutes | |
| Cardiovascular implants \x96 Cardiac valve prostheses \x96 Part 3: Heart valve substitutes implanted by transcatheter techniques \x96 Amendment 1 (ISO 5840-3:2021/Amd 1:2025) | |
| Cardiovascular implants \x96 Cardiac valve prostheses \x96 Part 3: Heart valve substitutes implanted by transcatheter techniques | |
| Cellular rubbers and plastics - Determination of dynamic cushioning performance | |
| Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class | |
| Cereals - Vocabulary | |
| Cereals and pulses - Determination of the mass of 1000 grains | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method | |
| Cheese and processed cheese products - Determination of the total solids content (Reference method) | |
| Clear liquids - Estimation of colour by the Gardner colour scale | |
| Clear liquids - Estimation of colour by the platinum-cobalt colour scale | |
| Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements... | |
| Connections for hydraulic fluid power and general use \x96 Ports and stud ends with ISO 261 metric threads and O-ring sealing \x96 Part 1: Ports with truncated housing for O-ring... | |
| Construction drawings \x96 Indication of limit deviations | |
| Conveyor belts \x96 Method for the determination of the tear propagation resistance of textile conveyor belts | |
| Conveyor belts with a textile carcass \x96 Total belt thickness and thickness of constitutive elements \x96 Test methods (ISO 583:2023) | |
| Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method | |
| Cross recesses for screws | |
| Dentistry - Gypsum products | |
| Dentistry - Number coding system for rotary instruments - Part 1: General characteristics | |
| Dentistry - Number coding system for rotary instruments - Part 2: Shapes | |
| Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters | |
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments | |
| Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments | |
| Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments | |
| Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments | |
| Dentistry - Polymer-based pit and fissure sealants | |
| Dentistry - Root canal sealing materials | |
| Dentistry \x96 Ceramic materials (ISO 6872:2015/Amd 1:2018) | |
| Dentistry \x96 Ceramic materials (ISO 6872:2024) | |
| Dentistry \x96 Designation system for tooth development stages (ISO 5365:2024) | |
| Dentistry \x96 Elastomeric impression materials | |
| Dentistry \x96 General requirements of hand instruments \x96 Part 1: Non-hinged hand instruments (ISO 4865-1:2023) | |
| Dentistry \x96 Mobile dental units and dental patient chairs \x96 Part 1: General requirements (ISO 5467-1:2022) | |
| Dentistry \x96 Mobile dental units and dental patient chairs \x96 Part 2: Air, water, suction and wastewater systems (ISO 5467-2:2022) | |
| Dentistry \x96 Patient chair | |
| Dentistry \x96 Polymer-based composite machinable blanks (ISO 5139:2023) | |
| Dentistry \x96 Root-canal obturating points | |
| Destructive tests on welds in metallic materials \x96 Bend tests \x96 Amendment 1 | |
| Destructive tests on welds in metallic materials \x96 Bend tests | |
| Destructive tests on welds in metallic materials \x96 Longitudinal tensile test on weld metal in fusion welded joints | |
| Dried milk - Determination of moisture content (Reference method) | |
| Earth-moving machinery - Basic types - Identification and terms and definitions | |
| Earth-moving machinery \x96 Seat belts and seat belt anchorages \x96 Performance requirements and tests | |
| Earth-moving machinery \x96 Wheeled machines \x96 Steering requirements (ISO 5010:2019) | |
| Earth-moving machinery \x96 Zones of comfort and reach for controls | |
| Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point | |
| Energy management systems \x96 Guidelines for a phased implementation (ISO 50005:2021) | |
| Energy management systems \x96 Requirements with guidance for use \x96 Amendment 1: Climate action changes (ISO 50001:2018/Amd 1:2024) | |
| Energy management systems \x96 Requirements with guidance for use | |
| Energy performance of buildings \x96 Building management system \x96 Part 1: Module M10-12 (ISO 52127-1: 2021) | |
| Energy performance of buildings \x96 Contribution of building automation, controls and building management \x96 Part 1: General framework and procedures (ISO 52120-1:2021) | |
| Energy performance of buildings \x96 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads \x96 Part 1: Calculation procedures (ISO 52016-1:2017) | |
| Energy performance of buildings \x96 External climatic conditions \x96 Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017) | |
| Energy performance of buildings \x96 Indicators for partial EPB requirements related to thermal energy balance and fabric features \x96 Part 1: Overview of options (ISO 52018-1:2017) | |
| Energy performance of buildings \x96 Indicators, requirements, ratings and certificates \x96 Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017) | |
| Energy performance of buildings \x96 Overarching EPB assessment \x96 Part 1: General framework and procedures (ISO 52000-1:2017) | |
| Energy performance of buildings \x96 Sensible and latent heat loads and internal temperatures \x96 Part 1: Generic calculation procedures (ISO 52017-1:2017) | |
| Energy performance of buildings \x96 Thermal, solar and daylight properties of building components and elements \x96 Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection... | |
| Energy performance of buildings \x96 Thermal, solar and daylight properties of building components and elements \x96 Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection... | |
| Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide | |
| Ergonomic principles in the design of work systems | |
| Fans \x96 Performance testing using standardized airways \x96 Amendment 1 (ISO 5801:2017/Amd 1:2025) | |
| Fasteners - Ends of parts with external ISO metric thread | |
| Fasteners - Surface discontinuities - Part 2: Nuts | |
| Ferrous materials \x96 Heat treatments \x96 Vocabulary (ISO 4885:2017) | |
| Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification | |
| Freight containers \x96 Coding, identification and marking \x96 Amendment 3 | |
| Freight containers \x96 Coding, identification and marking | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 1: Terminology and common tests \x96 Amendment 1: Annex G (Vibration test code \x96 Hand-arm vibration and whole-body vibration)... | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 1: Terminology and common tests | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 2: Pedestrian-controlle d lawnmowers \x96 Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016) | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 2: Pedestrian-controlle d lawnmowers \x96 Amendment 2: Cutting-means-enclos ure guards (SO 5395-2:2013/Amd 2:2017) | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 2: Pedestrian-controlle d lawnmowers | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013/Amd 1:2017) | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 3: Ride-on lawnmowers with seated operator \x96 Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017) | |
| Garden equipment \x96 Safety requirements for combustion-engine-po wered lawnmowers \x96 Part 3: Ride-on lawnmowers with seated operator | |
| Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers | |
| Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures | |
| Gas analysis - Preparation of calibration gas mixtures - Static volumetric method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method | |
| Gas analysis - Requirements for certificates for calibration gases and gas mixtures | |
| Gas analysis \x96 Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2025) | |
| Gas analysis \x96 Contents of certificates for calibration gas mixtures \x96 Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020) | |
| Gas analysis \x96 Preparation of calibration gas mixtures using dynamic volumetric methods \x96 Part 1: Methods of calibration | |
| Gas analysis \x96 Preparation of calibration gas mixtures using dynamic volumetric methods \x96 Part 6: Critical orifices | |
| Gas analysis \x96 Preparation of calibration gas mixtures using dynamic volumetric methods \x96 Part 7: Thermal mass-flow controllers | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests | |
| Gas welding equipment \x96 Pressure gauges used in welding, cutting and allied processes | |
| Gas welding equipment \x96 Safety devices \x96 Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017) | |
| Gas welding equipment \x96 Safety devices \x96 Part 2: Not incorporating a flame (flashback) arrestor (ISO 5175-2:2017) | |
| General methods of measurement for digital television receivers | |
| Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing | |
| Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures | |
| Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 1: Design and metrological characteristics of two-point inside micrometers (ISO 5059-1:2025) | |
| Geometrical product specifications (GPS) \x96 Geometrical tolerancing \x96 Datums and datum systems (ISO 5459:2024) | |
| Geometrical product specifications (GPS) \x96 Rotary axis form-measuring instruments \x96 Design and metrological characteristics (ISO 5463:2024) | |
| Hardmetals \x96 Sampling and testing of powders using sintered test pieces (ISO 4884:2019) | |
| Heat treatable steels, alloy steels and free-cutting steels \x96 Part 5: Nitriding steels (ISO 683-5:2017) | |
| Heat-treatable steels, alloy steels and free-cutting steels \x96 Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels \x96 Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels \x96 Part 3: Case-hardening steels (ISO 683-3:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels \x96 Part 4: Free-cutting steels (ISO 683-4:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels \x96 Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023) | |
| Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels | |
| Hexagon socket head cap screws | |
| Hydrometry \x96 Measurement of discharge by the ultrasonic (acoustic) method | |
| Hypodermic needles for single use \x96 Colour coding for identification (ISO 6009:2016) | |
| Ice makers for commercial use \x96 Classification, requirements and test conditions (ISO 6369:2023) | |
| Implants for surgery \x96 Metallic materials \x96 Part 1: Wrought stainless steel (ISO 5832-1:2024) | |
| Implants for surgery \x96 Metallic materials \x96 Part 2: Unalloyed titanium | |
| Implants for surgery \x96 Metallic materials \x96 Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) | |
| Implants for surgery \x96 Metallic materials \x96 Part 6: Wrought cobalt-nickel-chromi um-molybdenum alloy (ISO 5832-6:1997) | |
| Implants for surgery \x96 Metallic materials \x96 Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron alloy (ISO 5832-7:2024) | |
| In vitro diagnostic medical devices \x96 Single-use containers for the collection of specimens from humans other than blood (ISO 6717:2021) | |
| Industrial fans - Performance testing in situ | |
| Industrial fans - Performance testing using standardized airways | |
| Industrial valves \x96 Mounting kits for part-turn valve actuator attachment (ISO 5640:2024) | |
| Industrial valves \x96 Multi-turn valve actuator attachments | |
| Industrial valves \x96 Part-turn actuator attachments (ISO 5211:2017) | |
| Inflatable boats \x96 Part 1: Boats with a maximum motor power rating of 4,5 kW | |
| Inflatable boats \x96 Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive | |
| Inflatable boats \x96 Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater | |
| Inflatable boats \x96 Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater | |
| Inland navigation vessels \x96 Manually- and power-operated coupling devices for pushing units and coupled vessels \x96 Safety requirements and main dimensions | |
| Innovation management \x96 Fundamentals and vocabulary (ISO 56000:2020) | |
| Innovation management \x96 Innovation management system \x96 Guidance (ISO 56002:2019) | |
| Innovation management \x96 Tools and methods for innovation operation measurements \x96 Guidance (ISO 56008:2024) | |
| Innovation management \x96 Tools and methods for innovation partnership \x96 Guidance (ISO 56003:2019) | |
| Innovation management \x96 Tools and methods for intellectual property management \x96 Guidance (ISO 56005:2020) | |
| Innovation management \x96 Tools and methods for managing opportunities and ideas \x96 Guidance (ISO 56007:2023) | |
| Innovation management system \x96 Requirements (ISO 56001:2024) | |
| Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021) | |
| Knitting - Basic concepts - Vocabulary | |
| Laboratory glassware - Boiling flasks with conical ground joints | |
| Laboratory glassware - Bottles - Part 1: Screw-neck bottles | |
| Laboratory glassware - Bottles - Part 2: Conical neck bottles | |
| Laboratory glassware - Bottles - Part 3: Aspirator bottles | |
| Laboratory glassware - Filter flasks | |
| Laboratory glassware - Graduated measuring cylinders | |
| Laboratory glassware - Single-volume pipettes | |
| Laboratory glassware \x96 Volumetric instruments \x96 Methods for testing of capacity and for use | |
| Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination | |
| Leather - Chemical tests - Determination of volatile matter | |
| Leather - Determination of flex resistance - Part 2: Vamp flex method | |
| Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) | |
| Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) | |
| Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method | |
| Leather - Physical test methods - Determination of water resistance of heavy leathers | |
| Leather \x96 Chemical determination of chromic oxide content \x96 Part 1: Quantification by titration | |
| Leather \x96 Chemical determination of chromic oxide content \x96 Part 3: Quantification by atomic absorption spectrometry | |
| Leather \x96 Chemical determination of chromic oxide content \x96 Part 4: Quantification by inductively coupled plasma \x96 optical emission spectrometer (ICP-OES) | |
| Leather \x96 Determination of flex resistance \x96 Part 1: Flexometer method (ISO 5402-1:2017) | |
| Liquefied petroleum gases - Corrosiveness to copper - Copper strip test | |
| Lithopone pigments \x96 General requirements and methods of testing (ISO 473:2019) | |
| Loading and unloading of liquefied natural gas (LNG) tank wagons and containers (ISO 5124:2024) | |
| Low-pressure hose assemblies for use with medical gases \x96 Amendment 1 | |
| Low-pressure hose assemblies for use with medical gases | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015) | |
| Maize \x96 Determination of moisture content (on milled grains and on whole grains) | |
| Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 6: Wedge meters | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 1: General principles and requirements | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 2: Orifice plates | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 3: Nozzles and Venturi nozzles | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 4: Venturi tubes | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x96 Part 5: Cone meters | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace | |
| Metallic and other inorganic coatings \x96 Electrodeposited coatings of chromium for engineering purposes | |
| Metallic materials - Brinell hardness test - Part 1: Test method | |
| Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines | |
| Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks | |
| Metallic materials - Brinell hardness test - Part 4: Table of hardness values | |
| Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) | |
| Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks | |
| Metallic materials \x96 Rockwell hardness test \x96 Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2023) | |
| Metallic materials \x96 Vickers hardness test \x96 Part 1: Test method | |
| Metallic materials \x96 Vickers hardness test \x96 Part 2: Verification and calibration of testing machines | |
| Metallic materials \x96 Vickers hardness test \x96 Part 3: Calibration of reference blocks | |
| Metallic materials \x96 Vickers hardness test \x96 Part 4: Tables of hardness values | |
| Microbiology of food and animal feed - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 6: Specific rules for the preparation of samples taken... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30\xb0C | |
| Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 5: Specific rules for the preparation of milk... | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the detection of Salmonella spp. \x96 Amendment 1: Annex D: Detection of Salmonella spp. in animal faeces and in... | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the detection of Salmonella spp. | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the enumeration of coagulase-positive staphyllococci (Staphylococcus aureus and other species) \x96 Part 1: Technique using Baird-Parker agar medium | |
| Microbiology of food and animal feeding stuffs \x96 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination \x96 Part 2: Specific rules for the preparation of meat... | |
| Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 1: Colony count at 30 degrees C by the pour plate technique | |
| Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique | |
| Microbiology of the food chain \x96 Horizontal method for the detection, enumeration and serotyping of Salmonella \x96 Part 1: Detection of Salmonella spp. (ISO 6579-1:2017) | |
| Microbiology of the food chain \x96 Horizontal method for the detection, enumeration and serotyping of Salmonella \x96 Part 1: Detection of Salmonella spp. \x96 Amendment 1 Broader range of incubation... | |
| Microbiology of the food chain \x96 Horizontal method for the detection, enumeration and serotyping of Salmonella \x96 Part 4: Identification of monophasic Salmonella Typhimurium (1,4,[5],12:i:-) by polymerase chain reaction (PCR)... | |
| Microbiology of the food chain \x96 Horizontal method for the enumeration of microorganisms \x96 Part 1: Colony count at 30 \xb0C by the pour plate technique \x96 Amendment 1: Clarification... | |
| Microbiology of the food chain \x96 Horizontal method for the enumeration of microorganisms \x96 Part 2: Colony count at 30 \xb0C by the surface plating technique \x96 Amendment 1: Clarification... | |
| Microbiology of the food chain \x96 Horizontal method for the enumeration of microorganisms \x96 Part 2: Colony count at 30 degrees C by the surface plating technique | |
| Microbiology of the food chain \x96 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination \x96 Part 1: General rules for the preparation of the initial suspension... | |
| Microbiology of the food chain \x96 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination \x96 Part 3: Specific rules for the preparation of fish and fishery... | |
| Microbiology of the food chain \x96 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination \x96 Part 4: Specific rules for the preparation of miscellaneous products (ISO... | |
| Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) | |
| Milk fat products - Determination of water content - Karl Fischer method | |
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods | |
| Natural gas - Determination of sulfur compounds - Part 1: General introduction | |
| Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry | |
| Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method | |
| Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Vocabulary (ISO 5577:2017) | |
| Non-destructive testing of welds \x96 Phased array ultrasonic testing (UT-PA) for thin-walled steel components \x96 Acceptance levels (ISO 4761:2022) | |
| Oilseeds - Determination of content of impurities (ISO 658:2002) | |
| Oilseeds - Determination of oil content (Reference method) | |
| Oilseeds - Reduction of laboratory sample to test sample | |
| Oilseeds \x96 Determination of moisture and volatile matter content | |
| Oilseeds \x96 Sampling | |
| Packaging \x96 Vocabulary \x96 Part 1: Paper sacks (ISO 6590-1:2025) | |
| Paints and varnishes - Bend test (conical mandrel) | |
| Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of... | |
| Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of... | |
| Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of... | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter | |
| Paints and varnishes \x96 Determination of hiding power \x96 Part 1: Kubelka-Munk method for white and light-coloured paints | |
| Paints and varnishes \x96 Determination of hiding power \x96 Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate | |
| Paints and varnishes \x96 Determination of resistance to humidity \x96 Part 1: Continuous condensation | |
| Paints and varnishes \x96 Determination of resistance to humidity \x96 Part 2: Procedure for exposing test specimens in condensation-water atmospheres | |
| Paints and varnishes \x96 Evaluation of degradation of coatings \x96 Designation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 6: Assessment of... | |
| Paints and varnishes \x96 Evaluation of degradation of coatings \x96 Designation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 7: Assessment of... | |
| Paints and varnishes \x96 Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance \x96 Part 3: Assessment of degree of rusting (ISO 4628-3:2024) | |
| Paper and board - Determination of grammage | |
| Paper and board - Determination of thickness, density and specific volume | |
| Paper and board \x96 Determination of water absorptiveness \x96 Cobb method | |
| Paper, board and pulps \x96 Determination of dry matter content \x96 Oven-drying method | |
| Paper, board, pulps and cellulosic nanomaterials \x96 Determination of dry matter content by oven-drying method \x96 Part 1: Materials in solid form (ISO 638-1:2021) | |
| Paper, board, pulps and cellulosic nanomaterials \x96 Determination of dry matter content by oven-drying method \x96 Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2021) | |
| Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO 6781-3:2015)... | |
| Performance of buildings \x96 Detection of heat, air and moisture irregularities in buildings by infrared methods \x96 Part 1: General procedures (ISO 6781-1:2023) | |
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data | |
| Petroleum products - Determination of ash | |
| Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method | |
| Petroleum products - Determination of knock characteristics of motor fuels - Research method | |
| Petroleum products \x96 Determination of the ignition quality diesel fuels \x96 Cetane engine method | |
| Petroleum products \x96 Gum content of fuels \x96 Jet evaporation method (ISO 6246:2017) | |
| Petroleum products \x96 Gum content of fuels \x96 Jet evaporation method \x96 Amendment 1: Purity requirement for n-heptane (ISO 6246:2017/Amd 1:2019) | |
| Petroleum, petrochemical and natural gas industries \x96 Dry gas sealing systems for axial, centrifugal, and rotary screw compressors and expanders (ISO 6368:2021) | |
| Pipework components - Definition and selection of DN (nominal size) | |
| Plastics - Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of prope... | |
| Plastics - Determination of apparent density of material that can be poured from a specified funnel | |
| Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel | |
| Plastics - Determination of compressive properties | |
| Plastics - Determination of dynamic mechanical properties - Part 1: General principles | |
| Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing | |
| Plastics - Determination of refractive index | |
| Plastics - Determination of tensile properties - Part 1: General principles | |
| Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics | |
| Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets | |
| Plastics - Determination of water absorption | |
| Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method | |
| Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method | |
| Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
| Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps | |
| Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value | |
| Plastics - Unplasticized cellulose acetate - Determination of moisture content | |
| Plastics - Unsaturated polyester resins - Determination of reactivity at 80 C (conventional method) | |
| Plastics - Vocabulary | |
| Plastics \x96 Determination of dynamic mechanical properties \x96 Part 2: Torsion-pendulum method | |
| Plastics \x96 Determination of dynamic mechanical properties \x96 Part 3: Flexural vibration \x96 Resonance-curve method | |
| Plastics \x96 Determination of matter extractable by organic solvents (conventional methods) | |
| Plastics \x96 Determination of pourability (ISO 6186:2023) | |
| Plastics \x96 Determination of puncture impact behaviour of rigid plastics \x96 Part 2: Instrumented impact testing (ISO 6603-2:2023) | |
| Plastics \x96 Determination of tensile properties \x96 Part 3: Test conditions for films and sheets | |
| Plastics \x96 Determination of tensile properties \x96 Part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites | |
| Plastics \x96 Determination of tensile properties \x96 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | |
| Plastics \x96 Liquid epoxy resins \x96 Determination of tendency to crystallize | |
| Plastics \x96 Methods of exposure to laboratory light sources \x96 Part 1: General guidance | |
| Plastics \x96 Poly(vinyl chloride) \x96 Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022) | |
| Plastics \x96 Smoke generation \x96 Part 2: Determination of optical density by a single-chamber test | |
| Plastics \x96 Styrene/acrylonitril e (SAN) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Vocabulary \x96 Amendment 1: Additional items (ISO 472:2013/Amd 1:2018) | |
| Plastics hoses \x96 Textile-reinforced types for compressed-air applications \x96 Specification (ISO 5774:2023) | |
| Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification | |
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating | |
| Polymeric materials, cellular flexible - Determination of air flow permeability | |
| Powder metallurgy \x96 Hot isostatic pressing \x96 Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022) | |
| Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids | |
| Pulps - Determination of drainability - Part 1: Schopper-Riegler method | |
| Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light | |
| Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light | |
| Pulps - Laboratory beating - Part 2: PFI mill method | |
| Pulps - Laboratory sheets - Determination of physical properties | |
| Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps | |
| Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees \xb0C | |
| Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method | |
| Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K\xf6then method | |
| Pulps \x96 Laboratory wet disintegration \x96 Part 3: Disintegration of mechanical pulps at > 85 degrees \xb0C | |
| Resilient,textile and laminate floor coverings \x96 Castor chair test (ISO 4918:2016) | |
| Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 | |
| Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes | |
| Resistance spot welding \x96 Electrode adaptors, female taper 1:10 (ISO 5829:1984) | |
| Resistance welding - Resistance welding equipment - Mechanical and electrical requirements | |
| Resistance welding \x96 Materials for electrodes and ancillary equipment | |
| Resistance welding \x96 Spot welding electrode caps | |
| Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics | |
| Resistance welding equipment - Transformers - General specifications applicable to all transformers | |
| Rice - Determination of amylose content - Part 1: Reference method (ISO 6647-1:2015) | |
| Rice - Determination of amylose content - Part 2: Routine methods (ISO 6647-2:2015) | |
| Rubber and plastics hoses \x96 Determination of volumetric expansion (ISO 6801:2021) | |
| Rubber and plastics hoses and hose assemblies \x96 Methods of measurement of the dimensions of hoses and the lengths of hose assemblies \x96 Amendment 1: Clarification of position at which... | |
| Rubber and plastics hoses and hose assemblies \x96 Methods of measurement of the dimensions of hoses and the lengths of hose assemblies | |
| Rubber and plastics hoses and hose assemblies with wire reinforcements \x96 Hydraulic impulse test with flexing | |
| Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification | |
| Rubber hoses and hose assemblies for saturated steam \x96 Specification (ISO 6134:2017) | |
| Rubber hoses and hose assemblies for transferring anhydrous ammonia \x96 Specification (ISO 5771:2024) | |
| Rubber hoses and hose assemblies for use in oil burners \x96 Specification (ISO 6806:2024) | |
| Rubber hoses and hose assemblies for water suction and discharge \x96 Specification (ISO 4641:2024) | |
| Rubber or plastics hoses and hose assemblies \x96 Hydraulic-pressure impulse test without flexing (ISO 6803:2017) | |
| Rubber, vulcanized or thermoplastic \x96 Rubber sheets and rubber-coated fabrics \x96 Determination of transmission rate of volatile liquids (gravimetric technique) | |
| Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing | |
| Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method | |
| Rubber- or plastics-coated fabrics \x96 Determination of abrasion resistance \x96 Part 1: Taber abrader (ISO 5470-1:2016) | |
| Rubber- or plastics-coated fabrics \x96 Determination of abrasion resistance \x96 Part 2: Martindale abrader | |
| Rubber- or plastics-coated fabrics \x96 Determination of blocking resistance (ISO 5978:2023) | |
| Rubber- or plastics-coated fabrics \x96 Determination of resistance to liquids (ISO 6450:2021) | |
| Rubber- or plastics-coated fabrics \x96 Determination of tear resistance \x96 Part 1: Constant rate of tear methods (ISO 4674-1:2016) | |
| Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016) | |
| Sensory analysis - Methodology - Paired comparison test | |
| Sensory analysis \x96 Vocabulary \x96 Amendment 1 (ISO 5492:2008/Amd 1:2016) | |
| Shipbuilding - Trawl winches | |
| Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements | |
| Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components | |
| Ships and marine technology - Small weathertight steel hatches | |
| Ships and marine technology - Weathertight single-leaf steel doors | |
| Single-use containers for human venous blood specimen collection (ISO 6710:2017) | |
| Sintered metal materials \x96 Specifications | |
| Sintered metal materials, excluding hardmetals \x96 Unnotched impact test piece (ISO 5754:2017) | |
| Sisal agricultural twines | |
| Slotted set screws with flat point | |
| Solid biofuels \x96 Determination of fines content in pellets (ISO 5370:2023) | |
| Spices - Cumin (Cuminum cyminum L.) - Specification | |
| Spices and condiments - Botanical nomenclature | |
| Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) | |
| Standard representation of geographic point location by coordinates | |
| Starch hydrolysis products - Determination of reducing power and dextrose equivalent - Lane and Eynon constant titre method | |
| Starch hydrolysis products - Determination of water content - Modified Karl Fischer method | |
| Starches and derived products - Determination of chloride content - Potentiometric method | |
| Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Spectrophometric method | |
| Starches and derived products - Determination of sulphated ash | |
| Steel \x96 Determination of nitrogen content \x96 Spectrophotometric method | |
| Steel \x96 Hardenability test by end quenching (Jominy test) (ISO 642:2024) | |
| Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method | |
| Steel and cast iron \x96 Determination of copper content \x96 Flame atomic absorption spectrometric method (ISO 4943:2022) | |
| Steel and cast iron \x96 Determination of total silicon contents \x96 Reduced molybdosilicate spectrophotometric method \x96 Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018) | |
| Steel and iron - Determination of nickel content - Gravimetric or titrimetric method | |
| Steel and iron - Determination of sulfur content - Gravimetric method | |
| Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 % | |
| Steels - Micrographic determination of the apparent grain size | |
| Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content | |
| Technical drawings - Requirements for microcopying | |
| Technical drawings - Screw threads and threaded parts - Part 1: General conventions | |
| Technical drawings - Screw threads and threaded parts - Part 2: Screw threads inserts | |
| Technical drawings - Simplified representation of bars and profile sections | |
| Technical drawings - Simplified representation of centre holes | |
| Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles | |
| Technical drawings \x96 Representation of splines and serrations | |
| Technical drawings \x96 Screw threads and threaded parts \x96 Part 3: Simplified representation | |
| Technical drawings \x96 Simplified representation of pipelines \x96 Part 1: General rules and orthogonal representation | |
| Technical drawings \x96 Simplified representation of pipelines \x96 Part 2: Isometric projection | |
| Technical drawings \x96 Simplified representation of pipelines \x96 Part 3: Terminal features of ventilation and drainage systems | |
| Technical drawings for glassware | |
| Technical product documentation - Part references | |
| Technical product documentation - Sizes and layout of drawing sheets | |
| Technical specifications for centrifugal pumps - Class II | |
| Test sieves for cereals | |
| Textile fabrics - Determination of resistance to surface wetting (spray test) | |
| Textiles - Determination of dimensional change in washing and drying | |
| Textiles - Determination of thickness of textiles and textile products | |
| Textiles \x96 Domestic washing and drying procedures for textile testing | |
| Textiles \x96 Fibres \x96 Determination of breaking force and elongation at break of individual fibres | |
| Textiles \x96 Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977) | |
| Thermoplastics hoses, textile-reinforced, for general-purpose water applications \x96 Specification (ISO 6224:2024) | |
| Thermoplastics pipes - Determination of tensile properties - Part 1: General test method | |
| Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes | |
| Thermoplastics pipes \x96 Determination of tensile properties \x96 Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly... | |
| Titanium dioxide pigments for paints - Part 1: Specifications and methods of test | |
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grade A, B and C | |
| Tolerances for fasteners \x96 Part 3: Washers for bolts, screws and nuts \x96 Product grades A, C and F (ISO 4759-3:2016) | |
| Tool steels | |
| Tractors and machinery for agriculture and forestry \x96 Guards for power take-off (PTO) drive-shafts \x96 Strength and wear tests and acceptance criteria | |
| Vitreous and porcelain enamels \x96 Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022) | |
| Vitreous and porcelain enamels \x96 Determination of the resistance to abrasion \x96 Part 1: Abrasion testing apparatus (ISO 6370-1:1991) | |
| Vitreous and porcelain enamels \x96 Determination of the resistance to abrasion \x96 Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2020) | |
| Water quality - Determination of cadmium by atomic absorption spectrometry | |
| Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction | |
| Water quality - Determination of dissolved oxygen - Electrochemical probe method | |
| Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004) | |
| Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test | |
| Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999) | |
| Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium | |
| Water quality - Sampling - Part 13: Guidance on sampling of sludges | |
| Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples | |
| Water quality - Sampling - Part 19: Guidelines on sampling in marine sediments | |
| Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters | |
| Water quality \x96 Determination of biochemical oxygen demand after n days (BODn) \x96 Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815-1:2019) | |
| Water quality \x96 Sampling \x96 Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014) | |
| Water quality \x96 Sampling \x96 Part 16: Guidance on biotesting of samples (ISO 5667-16:2017) | |
| Water quality \x96 Sampling \x96 Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2023) | |
| Water quality \x96 Sampling \x96 Part 1: Guidance on the design of sampling programmes and sampling techniques | |
| Water quality \x96 Sampling \x96 Part 3: Preservation and handling of water samples (ISO 5667-3:2024) | |
| Water quality \x96 Sampling \x96 Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014) | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006) | |
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding | |
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure | |
| Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings | |
| Welding consumables \x96 Deposition of a weld metal pad for chemical analysis | |
| Welding consumables \x96 Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels \x96 Classification | |
| Wheat - Determination of the sedimentation index - Zeleny test | |
| Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph | |
| Wheat flour \x96 Physical characteristics of doughs \x96 Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2025) |
| << Prev | Next >> |