Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
630
640
650
660
670
680
688
689
690
691
692
693
694
695
696
697
698
699
700
710
720
730
740
750
760
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics \x96 Noise emitted by machinery and equipment \x96 Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections | |
| Acoustics \x96 Noise emitted by machinery and equipment \x96 Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level \x96... | |
| Acoustics \x96 Noise emitted by machinery and equipment \x96 Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at... | |
| Agricultural machinery \x96 Equipment for sowing \x96 Minimization of the environmental effects of fan exhaust from pneumatic systems \x96 Amendment 1 (ISO 17962:2015/DAM 1:2020) | |
| Agricultural machinery \x96 Equipment for sowing \x96 Minimization of the environmental effects of fan exhaust from pneumatic systems \x96 Amendment 1 (ISO 17962:2015/FDAM 1:2021) | |
| Amendment 1 \x96 Basic and safety principles for man-machine interface, marking and identification \x96 Identification of equipment terminals, conductor terminations and conductors | |
| Amendment 1 \x96 Classification of environmental conditions \x96 Part 3-3: Classification of groups of environmental parameters and their severities \x96 Stationary use at weatherprotected locations | |
| Amendment 1 \x96 Determination of inrush current characteristics of lighting products | |
| Amendment 1 \x96 Electric and hybrid electric road vehicles \x96 Radio disturbance characteristics \x96 Limits and methods of measurement for the protection of off-board receivers below 30 MHz | |
| Amendment 1 \x96 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-17: Particular requirements for hand-held routers | |
| Amendment 1 \x96 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-6: Particular requirements for hand-held hammers | |
| Amendment 1 \x96 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-14: Particular requirements for transportable drain cleaners | |
| Amendment 1 \x96 Electrical accessories \x96 Cord sets and interconnection cord sets | |
| Amendment 1 \x96 Electrostatics \x96 Part 6-1: Electrostatic control in healthcare \x96 General requirements for facilities | |
| Amendment 1 \x96 Explosive atmospheres \x96 Part 25: Intrinsically safe electrical systems | |
| Amendment 1 \x96 Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-5: Tests \x96 Torsion | |
| Amendment 1 \x96 High-voltage switchgear and controlgear \x96 Part 100: Alternating-current circuit-breakers | |
| Amendment 1 \x96 High-voltage switchgear and controlgear \x96 Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| Amendment 1 \x96 Industrial communication networks \x96 Profiles \x96 Part 3: Functional safety fieldbuses \x96 General rules and profile definitions | |
| Amendment 1 \x96 Insulation coordination for equipment within low-voltage supply systems \x96 Part 1: Principles, requirements and tests | |
| Amendment 1 \x96 LED light source characteristics \x96 Part 1: Data sheets | |
| Amendment 1 \x96 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| Amendment 1 \x96 Low-voltage switchgear and controlgear \x96 Part 4-2: Contactors and motor-starters \x96 Semiconductor motor controllers, starters and soft-starters | |
| Amendment 1 \x96 Medical electrical equipment \x96 Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograp hs | |
| Amendment 1 \x96 Medical electrical equipment \x96 Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories | |
| Amendment 1 \x96 Medical electrical equipment \x96 Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors | |
| Amendment 1 \x96 Medical electrical equipment \x96 Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment | |
| Amendment 1 \x96 Medical electrical equipment \x96 Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment | |
| Amendment 1 \x96 Organic light emitting diode (OLED) Light sources for general lighting \x96 Safety \x96 Part 1: General requirements and tests | |
| Amendment 1 \x96 Organic light emitting diode (OLED) light sources for general lighting \x96 Safety \x96 Part 2-1: Particular requirements \x96 Semi-integrated OLED modules | |
| Amendment 1 \x96 Organic light emitting diode (OLED) light sources for general lighting \x96 Safety \x96 Part 2-2: Particular requirements \x96 Integrated OLED modules | |
| Amendment 1 \x96 Organic light emitting diode (OLED) light sources for general lighting \x96 Safety \x96 Part 2-3: Particular requirements \x96 Flexible OLED tiles and panels | |
| Amendment 1 \x96 Process management for avionics \x96 Counterfeit prevention \x96 Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Amendment 1 \x96 Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Sealed nickel-metal hydride cells and batteries for use in industrial applications \x96 Part 1: Performance | |
| Amendment 1 \x96 Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Amendment 1 \x96 Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules | |
| Amendment 1 \x96 Winding wires \x96 Test methods \x96 Part 1: General | |
| Amendment 1/Fragment 1: Electromagnetic compatibility (EMC) \x96 Part 6-3: Generic standards \x96 Emission standard for equipment in residential environments \x96 Miscellaneous items on general maintenance | |
| Amendment 2 \x96 Electromagnetic compatibility (EMC) \x96 Part 4-27: Testing and measurement techniques \x96 Unbalance, immunity test for equipment with input current not exceeding 16 A per phase | |
| Amendment 2 \x96 Lamps, light sources and LED packages for road vehicles \x96 Performance requirements | |
| Amendment 2 \x96 Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 1-4: Radio disturbance and immunity measuring apparatus \x96 Antennas and test sites for radiated disturbance... | |
| Anaesthetic and respiratory equipment \x96 Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases \x96 Amendment 1 (ISO 18082:2014/FDAmd 1:2017) | |
| Arc welding equipment \x96 Part 10: Electromagnetic compatibility (EMC) requirements | |
| Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2011/FDAM 1:2013) | |
| Assistive products for tissue integrity when lying down \x96 Part 1: General requirements \x96 Amendment 1 (ISO/DAM 1:2021) | |
| Assistive products for walking manipulated by both arms \x96 Requirements and test methods \x96 Part 2: Rollators \x96 Amendment 1: Eliminate brake requirements in 6.5 Structure requirements (ISO 11199 2:2021/DAM... | |
| Automatic electrical controls \x96 Part 2-14: Particular requirements for electric actuators | |
| Automatic electrical controls \x96 Part 2-9: Particular requirements for temperature sensing control | |
| Automatic electrical controls for household and similar use \x96 Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Biological evaluation of medical devices \x96 Part 12: Sample preparation and reference materials \x96 Amendment 1 (ISO 10993 12:2021/DAM 1:2024) | |
| Biological evaluation of medical devices \x96 Part 12: Sample preparation and reference materials \x96 Amendment 1 (ISO 10993 12:2021/FDAM 1:2025) | |
| Biological evaluation of medical devices \x96 Part 18: Chemical characterization of medical device materials within a risk management process (ISO 10993-18:2020) | |
| Biological evaluation of medical devices \x96 Part 4: Selection of tests for interactions with blood \x96 Amendment 1 (ISO 10993-4:2017/DAmd 1:2024) | |
| Biological evaluation of medical devices \x96 Part 7: Ethylene oxide sterilization residuals \x96 Amendment 1 (ISO 10993-7/DAM 1:2018) | |
| Biological evaluation of medical devices \x96 Part 7: Ethylene oxide sterilization residuals \x96 Amendment 1 (ISO 10993-7/FDAM 1:2019) | |
| Building automation and control systems (BACS) \x96 Part 5: Data communication protocol (ISO 16484-5:2017) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 1: Definitions, symbols, and comfort criteria \x96 Amendment 1 (ISO 11855-1:2021/DAM 1:2022) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2021) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 3: Design and dimensioning (ISO 11855-3:2021) | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO... | |
| Building environment design \x96 Embedded radiant heating and cooling systems \x96 Part 5: Installation (ISO 11855-5:2021) | |
| CENELEC standard voltages | |
| Communication networks and systems for power utility automation \x96 Part 4: System and project management | |
| Connectors for DC-application in photovoltaic systems \x96 Safety requirements and tests | |
| Connectors for electrical and electronic equipment \x96 Tests and measurements \x96 Part 99-002: Endurance test schedules \x96 Test 99b: Test schedule for unmating under electrical load | |
| Corrosion of metals and alloys \x96 Corrosion fatigue testing \x96 Part 2: Crack propagation testing using precracked specimens | |
| Cosmetics \x96 Microbiology \x96 Detection of Candida albicans | |
| Cosmetics \x96 Microbiology \x96 Detection of specified and non-specified microorganisms (ISO 18415:2017) | |
| Cosmetics \x96 Microbiology \x96 Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2017) | |
| Cosmetics \x96 Microbiology \x96 Enumeration of yeast and mould (ISO 16212:2017) | |
| Cosmetics \x96 Microbiology \x96 Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2019) | |
| Dentistry \x96 Coiled springs for use in orthodontics (ISO 17254:2016) | |
| Dentistry \x96 Vocabulary \x96 Amendment 1: Definitions for types of tests used in standards development (ISO 1942:2020/DAM 1:2025) | |
| Dentistry \x96 Wires for use in orthodontics | |
| Determination of flash point \x96 Abel closed-cup method (ISO 13736:2021) | |
| Determination of RF field strength, power density and SAR in the vicinity of base stations for the purpose of evaluating human exposure | |
| Dynamic modules \x96 Part 1: Performance standards \x96 General conditions | |
| Dynamic modules \x96 Part 2-1: Reliability qualification \x96 Test template | |
| Electric clothes washer-dryers for household use \x96 Methods for measuring the performance | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-10: Particular requirements for hand-held mixers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-14: Particular requirements for hand-held planers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-17: Particular requirements for hand-held routers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-1: Particular requirements for hand-held drills and impact drills | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-21: Particular requirements for hand-held drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-5: Particular requirements for hand-held circular saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-6: Particular requirements for hand-held hammers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-8: Particular requirements for hand-held shears and nibblers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 2-9: Particular requirements for hand-held tappers and threaders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-10: Particular requirements for transportable cut-off machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-12: Particular requirements for transportable threading machines | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-14: Particular requirements for transportable drain cleaners | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-1: Particular requirements for transportable table saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-4: Particular requirements for transportable bench grinders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 3-6: Particular requirements for transportable diamond drills with liquid system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 4-2: Particular requirements for hedge trimmers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety \x96 Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush... | |
| Electric toys \x96 Safety | |
| Electrical accessories \x96 Cord sets and interconnection cord sets | |
| Electrical equipment for measurement, control and laboratory use \x96 EMC requirements \x96 Part 1: General requirements | |
| Electrical household and similar cooling and freezing appliances \x96 Food preservation | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x96 Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electrically propelled mopeds and motorcycles \x96 Test specifications and safety requirements for lithium-ion battery systems \x96 Amendment 1 (ISO 18243:2017/DAM 1:2019) | |
| Electricity metering equipment \x96 General requirements, tests and test conditions \x96 Part 11: Metering equipment | |
| Electromagnetic compatibility (EMC) \x96 Part 3-2: Limits \x96 Limits for harmonic current emissions (equipment input current =16 A per phase) | |
| Electromagnetic compatibility (EMC) \x96 Part 4-34: Testing and measurement techniques \x96 Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per... | |
| Electromagnetic compatibility (EMC) \x96 Part 6-3: Generic standards \x96 Emission standard for equipment in residential environments | |
| Electromagnetic compatibility \x96 Requirements for household appliances, electric tools and similar apparatus \x96 Part 1: Emission | |
| Electronic fee collection \x96 Application interface definition for dedicated short-range communication \x96 Amendment 1 (ISO 14906:2018/DAM 1:2019) | |
| Electronic fee collection \x96 Compliance check communication for autonomous systems \x96 Amendment 1 (ISO 12813:2015/FDAmd 1:2017) | |
| Electrostatics \x96 Part 6-1: Electrostatic control for healthcare \x96 General requirements for facilities | |
| Energy consumption of vending machines | |
| Energy management system application program interface (EMS-API) \x96 Part 301: Common information model (CIM) base | |
| Environmental labels and declarations \x96 Self-declared environmental claims (Type II environmental labelling) | |
| Environmental labels and declarations \x96 Type I environmental labelling \x96 Principles and procedures \x96 Amendment 1 (ISO 14024:1999/DAM 1:2015) | |
| Environmental management \x96 Life cycle assessment \x96 Principles and framework | |
| Environmental management \x96 Life cycle assessment \x96 Requirements and guidelines \x96 Amendment 1 (ISO 14044:2006/FDAM 1:2017) | |
| Environmental management \x96 Vocabulary (ISO 14050:2020) | |
| Explosive atmospheres \x96 Part 0: Equipment \x96 General requirements | |
| Explosive atmospheres \x96 Part 15: Equipment protection by type of protection "n" | |
| Eye and face protection \x96 Sunglasses and related eyewear \x96 Part 1: Sunglasses for general use \x96 Amendment 1 (ISO 12312-1:2022/DAM 1:2025) | |
| Eye and face protection for occupational use \x96 Part 1: General requirements (ISO 16321-1:2021) | |
| Eye and face protection for occupational use \x96 Part 1: General requirements \x96 Amendment 1 (ISO 16321-1:2021/FDAM 1:2024) | |
| Eye and face protection for occupational use \x96 Part 3: Additional requirements for mesh protectors \x96 Amendment 1 (ISO 16321-3:2021/DAM 1:2025) | |
| Fasteners \x96 Terminology \x96 Part 2: Vocabulary and definitions for coatings | |
| Fibre optic active components and devices \x96 Performance standards \x96 Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-4: Tests \x96 Fibre or cable retention | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 2-5: Tests \x96 Torsion | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures \x96 Part 3-7: Examinations and measurements \x96 Wavelength dependence of attenuation and return loss of single mode... | |
| Fibre optic interconnecting devices and passive components \x96 Performance standard \x96 Part 071-02: Non-connectorized single-mode fibre optic 1 \xd7 2 and 2 \xd7 2 spatial switches for category C \x96... | |
| Fibre optic interconnecting devices and passive components \x96 Performance standard \x96 Part 1: General and guidance | |
| Fibre-optic communication subsystem test procedures \x96 Part 4-1: Installed cabling plant \x96 Multimode attenuation measurement | |
| Fixed capacitors for use in electronic equipment \x96 Part 14: Sectional specification \x96 Fixed capacitors for electromagnetic interference suppression and connection to the supply mains | |
| Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008:2017) | |
| Flow-metering devices for connection to terminal units of medical gas pipeline systems | |
| Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements | |
| Furniture - Bunk beds and high beds - Part 2: Test methods | |
| Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/DAM 1:2013) | |
| Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/FDAM 1:2014) | |
| Gas cylinders \x96 17E and 25E taper threads for connection of valves to gas cylinders \x96 Part 1: Specifications (ISO 11363-1:2018) | |
| Gas cylinders \x96 Acetylene cylinder bundles \x96 Filling conditions and filling inspection | |
| Gas cylinders \x96 Acetylene cylinders \x96 Periodic inspection and maintenance | |
| Gas cylinders \x96 Compatibility of cylinder and valve materials with gas contents \x96 Part 1: Metallic materials (ISO 11114-1:2020) | |
| Gas cylinders \x96 Compatibility of cylinder and valve materials with gas contents \x96 Part 1: Metallic materials \x96 Amendment 1 (ISO 11114-1:2012/FDAmd 1:2016) | |
| Gas cylinders \x96 Cylinder valves \x96 Manufacturing tests and examinations \x96 Amendment 1 (ISO 14246:2022/DAM 1:2025) | |
| Gas cylinders \x96 Cylinder valves \x96 Specification and type testing (ISO 10297:2014/FDAM 1:2016) | |
| Gas cylinders \x96 Gas properties and associated classification (FTSC) codes \x96 Amendment 1 (ISO 14456:2015/DAM 1:2018) | |
| Gas cylinders \x96 High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | |
| Gas cylinders \x96 Non-refillable metallic gas cylinders \x96 Specification and test methods Amendment 1 (ISO 11118:2015:FDAM 1:2019) | |
| Gas cylinders \x96 Non-refillable metallic gas cylinders \x96 Specification and test methods | |
| Gas cylinders \x96 Quick-release cylinder valves \x96 Specification and type testing \x96 Amendment 1: Gas cylinders \x96 Quick-release cylinder valves \x96 Specification and type testing (ISO 17871:2015/DAM 1:2017) | |
| Gas cylinders \x96 Refillable seamless steel gas cylinders and tubes \x96 Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing | |
| Gas cylinders \x96 Seamless steel and seamless aluminium-alloy gas cylinders and tubes \x96 Periodic inspection and testing (ISO 18119:2018) | |
| Gas cylinders \x96 Seamless steel and seamless aluminium-alloy gas cylinders and tubes \x96 Periodic inspection and testing \x96 Amendment 1 (ISO 18119:2018/FDAM 1:2021) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Manually operated (ISO 15995:2021) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Manually operated \x96 Amendment 1 (ISO 15995:2021/FDAM 1:2024) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Self-closing (ISO 14245:2021) | |
| Gas cylinders \x96 Specifications and testing of LPG cylinder valves \x96 Self-closing \x96 Amendment 1 (ISO 14245:2021/FDAM 1:2024) | |
| Geographic information \x96 Metadata \x96 Part 1: Fundamentals \x96 Amendment 1 (ISO 19115-1:2014/FDAM 1:2017) | |
| Geographic information \x96 Metadata \x96 Part 2: Extensions for acquisition and processing \x96 Amendment 1 (ISO 19115-2:2019/DAM 1:2020) | |
| Geographic information \x96 Positioning services (ISO 19116:2019) | |
| Geographic information \x96 Procedures for item registration \x96 Part 1: Fundamentals \x96 Amendment 1 (ISO 19135-1:2015/DAM 1:2020) | |
| Geographic information \x96 Referencing by coordinates (ISO 19111:2019) | |
| Geographic information \x96 Referencing by coordinates \x96 Amendment 2 (ISO 19111:2019/DAM 2:2023) | |
| Geometrical product specification (GPS) \x96 Filtration \x96 Part 61: Linear areal filters \x96 Gaussian filters \x96 Amendment 1 (ISO 16610-61:2015/DAM 1:2018) | |
| Geometrical product specification (GPS) \x96 Filtration \x96 Part 61: Linear areal filters \x96 Gaussian filters \x96 Amendment 1 (ISO 16610-61:2015/FDAM 1:2019) | |
| Geosynthetics \x96 Part 1: Terms and definitions \x96 Amendment 1 (ISO 10318-1:2015/FDAM 1:2018) | |
| Geosynthetics \x96 Part 2: Symbols and pictograms \x96 Amendment 1 (ISO 10318-2:2015/FDAM 1:2018) | |
| Geotechnical investigation and testing \x96 Geotechnical monitoring by field instrumentation \x96 Part 3: Measurement of displacements across a line: Inclinometers \x96 Amendment 1 (ISO 18674-3:2017/DAM1:20 19) | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018) | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 12: Determination of liquid and plastic limits \x96 Amendment 1 (ISO 17892-12:2018/Damd 1:2021) | |
| Geotechnical investigation and testing \x96 Laboratory testing of soil \x96 Part 1: Determination of water content \x96 Amendment 1 (ISO 17892-1:2014/DAM 1:2021) | |
| Greenhouse gases \x96 Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals \x96 Amendment 1 (ISO 14064 1:2018/DAM 1:2024) | |
| Gymnastic equipment \x96 General safety requirements and test methods | |
| Health informatics \x96 Identification of medicinal products \x96 Data elements and structures for the unique identification and exchange of regulated medicinal product information \x96 Amendment 1 (ISO 11615:2017/DAM 1:2021) | |
| High rise aerial appliances for fire and rescue service use \x96 Turntable ladders with sequential movements \x96 Safety and performance requirements and test methods | |
| High-voltage switchgear and controlgear \x96 Part 100: Alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear \x96 Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear \x96 Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV \x96 Fluid-filled and extruded insulation cables \x96 Fluid-filled and dry-type cable-terminations... | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 1: General requirements | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 3: Electrical safety requirements | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 5-1: EMC requirements, conditions and test set-up | |
| Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) \x96 Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments | |
| Home and building electronic systems (HBES) and building automation and control systems (BACS) \x96 Part 5-3: EMC requirements for HBES/BACS used in industrial environments | |
| Household and similar electrical air cleaning appliances \x96 Methods for measuring the performance \x96 Part 1: General requirements | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-34: Particular requirements for motor-compressors | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-75: Particular requirements for commercial dispensing appliances and vending machines | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-81: Particular requirements for foot warmers and heating mats | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-82: Particular requirements for amusement machines and personal service machines | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-87: Particular requirements for electrical animal-stunning equipment | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-90: Particular requirements for commercial microwave ovens | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-16: Particular requirements for washer-dryers | |
| Household electric cooking appliances \x96 Part 1: Ranges, ovens, steam ovens and grills \x96 Methods for measuring performance | |
| Household electric cooking appliances \x96 Part 2: Hobs \x96 Methods for measuring performance | |
| Hygrothermal performance of building materials and products \x96 Determination of water vapour transmission properties \x96 Cup method \x96 Amendment 1 (ISO 12572:2016/DAM 1:2024) | |
| Impulse tests on cables and their accessories | |
| Industrial communication networks \x96 Installation of communication networks in industrial premises | |
| Industrial communication networks \x96 Profiles \x96 Part 3: Functional safety fieldbuses \x96 General rules and profile definitions | |
| Industrial non-destructive testing equipment \x96 Electron linear accelerator | |
| Industrial systems, installations and equipment and industrial products \x96 Identification of terminals within a system | |
| Industrial valves \x96 Ball valves of thermoplastics materials \x96 Amendment 1 (ISO 16135:2006/FDAM 1:2019) | |
| Industrial valves \x96 Ball valves of thermoplastics materials | |
| Industrial valves \x96 Butterfly valves of thermoplastics materials \x96 Amendment 1 (ISO 16136:2006/FDAM 1:2019) | |
| Industrial valves \x96 Butterfly valves of thermoplastics materials | |
| Industrial valves \x96 Check valves of thermoplastics materials \x96 Amendment 1 (ISO 16137:2006/DAM 1:2018) | |
| Industrial valves \x96 Check valves of thermoplastics materials | |
| Industrial valves \x96 Diaphragm valves of thermoplastics materials \x96 Amendment 1 (ISO 16138:2006/FDAM 1:2019) | |
| Industrial valves \x96 Diaphragm valves of thermoplastics materials | |
| Industrial valves \x96 Gate valves of thermoplastics materials \x96 Amendment 1 (ISO 16139:2006/FDAM 1:2019) | |
| Industrial valves \x96 Gate valves of thermoplastics materials | |
| Industrial-process measurement and control \x96 Programmable controllers \x96 Part 2: Equipment requirements and tests | |
| Insulation coordination for equipment within low-voltage supply systems \x96 Part 1: Principles, requirements and tests | |
| Integrated circuits \x96 EMC evaluation of transceivers \x96 Part 5: Ethernet transceivers | |
| Intelligent transport systems \x96 Cooperative systems \x96 Globally unique identification (ISO 17419:2018) | |
| Intravascular catheters \x96 Sterile and single-use catheters \x96 Part 6: Subcutaneous implanted ports \x96 Amendment 1 (ISO 10555-6:2015/DAM 1:2019) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Lamps and light sources for road vehicles \x96 Dimensional, electrical and luminous requirements | |
| Lamps, light sources and led packages for road vehicles \x96 Performance requirements | |
| LED packages \x96 Long-term luminous and radiant flux maintenance projection | |
| Lighting control interface for dimming \x96 Analogue voltage dimming interface for electronic current sourcing controlgear | |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| Liquefied petroleum gases \x96 Assessment of the dryness of propane \x96 Valve freeze method \x96 Amendment 1 (ISO 13758:1996/DAM 1:2019) | |
| Live working \x96 Terminology for tools, devices and equipment | |
| Low-voltage switchgear and controlgear \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear \x96 Part 5-2: Control circuit devices and switching elements \x96 Proximity switches | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies \x96 Part 2: Power switchgear and controlgear assemblies | |
| Luminaires \x96 Part 1: General requirements and tests | |
| Lung ventilators and related equipment \x96 Vocabulary and semantics (ISO 19223:2019) | |
| Machine tools \x96 Safety \x96 Stationary grinding machines (ISO 16089:2015) | |
| Machinery for forestry \x96 General safety requirements \x96 Amendment 2: Access to operator's station and maintenance locations (ISO 11850:2011/DAM 2:2021) | |
| Machinery for forestry \x96 Portable chain-saw safety requirements and testing \x96 Part 2: Chain-saws for tree service (ISO 11681-2:2011/FDAM 1:2016) | |
| Magnetic materials \x96 Part 1: Classification | |
| Magnetic materials \x96 Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces \x96 Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security | |
| Maritime navigation and radiocommunication equipment and systems \x96 Presentation of navigation-related information on shipborne navigational displays \x96 General requirements, methods of testing and required test results | |
| Material declaration for products of and for the electrotechnical industry | |
| Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices \x96 Human models, instrumentation and procedures (Frequency... | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 5-1: Edge seals \x96 Suggested test methods for use with edge seal materials | |
| Mechanical vibration and shock \x96 Hand-arm vibration \x96 Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand \x96 Amendment 1 (ISO 10819:2013/FDAM 1:2018) | |
| Mechanical vibration and shock \x96 Hand-arm vibration \x96 Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | |
| Medical devices \x96 Quality management systems \x96 Requirements for regulatory purposes (ISO 13485:2016) | |
| Medical devices \x96 Symbols to be used with information to be supplied by the manufacturer \x96 Part 1: General requirements \x96 Amendment 1: Addition of defined term for authorized representative... | |
| Medical devices \x96 Symbols to be used with medical device labels, labelling and information to be supplied \x96 Part 1: General requirements (ISO 15223-1:2016, including corrected version 2017-03) | |
| Medical electrical equipment \x96 Part 1-3: General requirements for basic safety and essential performance \x96 Collateral Standard: Radiation protection in diagnostic X-ray equipment | |
| Medical electrical equipment \x96 Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators | |
| Medical electrical equipment \x96 Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators \x96 Amendment 1 | |
| Medical electrical equipment \x96 Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers | |
| Medical electrical equipment \x96 Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment | |
| Medical electrical equipment \x96 Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograp hs | |
| Medical electrical equipment \x96 Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use... | |
| Medical electrical equipment \x96 Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment | |
| Medical electrical equipment \x96 Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening | |
| Medical Electrical Equipment \x96 Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment | |
| Medical electrical equipment \x96 Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment | |
| Medical Electrical Equipment \x96 Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment | |
| Medical electrical equipment \x96 Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation | |
| Medical electrical equipment \x96 Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment | |
| Medical suction equipment \x96 Part 1: Electrically powered suction equipment \x96 Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/FDAM 1:2018) | |
| Metallic cables and other passive components test methods \x96 Part 4-15: Electromagnetic compatibility (EMC) \x96 Test method for measuring transfer impedance and screening attenuation \x96 or coupling attenuation with triaxial... | |
| Metallic cables and other passive components test methods \x96 Part 4-7: Electromagnetic compatibility (EMC) \x96 Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation... | |
| Methods of measurement and declaration of the detection range of detectors \x96 Passive infrared detectors for major and minor motion detection | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the detection of Escherichia coli O 157 | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the detection of Escherichia coli O157 \x96 Amendment 1: Annex B: Result of interlaboratory studies (ISO 16654:2001/FDAmd 1:2016) | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the detection of Escherichia coli O157 \x96 Amendment 2: Inclusion of performance testing of all culture media and reagents... | |
| Microbiology of food, animal feed and water \x96 Preparation, production, storage and performance testing of culture media \x96 Amendment 1 (ISO 11133:2014/FDAM 1:2017) | |
| Microbiology of food, animal feed and water \x96 Preparation, production, storage and performance testing of culture media \x96 Amendment 2 (ISO 11133:2014/DAmd 2:2017) | |
| Microbiology of the food chain \x96 Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits \x96 Amendment 1: Method validation studies and performance characteristics... | |
| Microbiology of the food chain \x96 Detection of Trichinella larvae in meat by artificial digestion method (ISO 18743:2015) | |
| Microbiology of the food chain \x96 Horizontal method for detection and enumeration of Campylobacter spp. \x96 Part 1: Detection method (ISO 10272-1:2017) | |
| Microbiology of the food chain \x96 Horizontal method for detection and enumeration of Campylobacter spp. \x96 Part 2: Colony-count technique (ISO 10272-2:2017) | |
| Microbiology of the food chain \x96 Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR \x96 Part 1: Method for quantification \x96 Amendment 1 (ISO 15216-1:2017/DAM... | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. \x96 Part 1: Detection method \x96 Amendment 1: Inclusion of... | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. \x96 Part 2: Enumeration method \x96 Amendment 1: Inclusion of... | |
| Microbiology of the food chain \x96 Method validation \x96 Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method | |
| Microbiology of the food chain \x96 Method validation \x96 Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory \x96 Amendment 1: Protocol... | |
| Microbiology of the food chain \x96 Method validation \x96 Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory \x96 Amendment 1: Validated... | |
| Microbiology of the food chain \x96 Method validation \x96 Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020) | |
| Microbiology of the food chain \x96 Method validation \x96 Part 4: Protocol for method validation in a single laboratory \x96 Amendment 2: Protocol for single-laboratory validation of identification methods of... | |
| Miniature fuses \x96 Part 8: Fuse resistors with particular overcurrent protection | |
| Mountaineering equipment \x96 Dynamic mountaineering ropes \x96 Safety requirements and test methods | |
| Multilayer piping systems for hot and cold water installations inside buildings \x96 Part 3: Fittings \x96 Amendment 1 (ISO 21003-3:2008/DAM 1:2020) | |
| Non-destructive testing of steel tubes \x96 Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections... | |
| Non-destructive testing of steel tubes \x96 Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections | |
| Non-destructive testing of steel tubes \x96 Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes | |
| Non-destructive testing of steel tubes \x96 Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness | |
| Non-destructive testing of steel tubes \x96 Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections | |
| Non-destructive testing of steel tubes \x96 Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or... | |
| Non-destructive testing of steel tubes \x96 Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections | |
| Non-destructive testing of steel tubes \x96 Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes | |
| Oil and gas industries including lower carbon energy \x96 Site-specific assessment of mobile offshore units \x96 Part 1: Jack-ups: elevated at a site \x96 Amendment 1 (ISO 19905-1:2023/DAmd1:2 024) | |
| Optical fibre cables \x96 Part 2-11: Indoor cables \x96 Detailed specification for simplex and duplex cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-21: Indoor cables \x96 Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Optical fibre cables \x96 Part 2-31: Indoor cables \x96 Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibres \x96 Part 2-10: Product specifications \x96 Sectional specification for category A1 multimode fibres | |
| Organic light emitting diode (OLED) Light sources for general lighting \x96 Safety \x96 Part 1: General requirements and tests | |
| Organic light emitting diode (OLED) panels for general lighting \x96 Performance Requirements | |
| Packaging for terminally sterilized medical devices \x96 Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2019) | |
| Packaging for terminally sterilized medical devices \x96 Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019) | |
| Packaging of components for automatic handling \x96 Part 1: Tape packaging of components with axial leads on continuous tapes | |
| Paints and varnishes \x96 Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content \x96 Part 2: Gas-chromatographic method \x96 Amendment 1 (ISO 11890-2:2020/DAM 1:2023) | |
| Paints and varnishes \x96 Methods of exposure to laboratory light sources \x96 Part 2: Xenon-arc lamps \x96 Amendment 1: Classification of daylight filters (ISO/16474-2:2013/DA M 1:2021) | |
| Paints and varnishes \x96 Methods of exposure to laboratory light sources \x96 Part 2: Xenon-arc lamps \x96 Amendment 1: Classification of daylight filters (ISO/16474-2:2013/FD AM 1:2022) | |
| Paragliding equipment \x96 Paragliders \x96 Part 2: Requirements and test methods for classifying flight safety characteristics | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 2: Measurement of passive intermodulation in coaxial cable assemblies | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 4: Measurement of passive intermodulation in coaxial cables | |
| Passive RF and microwave devices, intermodulation level measurement \x96 Part 6: Measurement of passive intermodulation in antennas | |
| Personal protective equipment \x96 Footwear protecting against risks in foundries and welding \x96 Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) | |
| Personal protective equipment \x96 Footwear protecting against risks in foundries and welding \x96 Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)... | |
| Personal protective equipment \x96 Protective footwear (ISO 20346:2021) | |
| Personal protective equipment \x96 Safety footwear (ISO 20345:2021) | |
| Personal protective equipment \x96 Test methods for footwear (ISO 20344:2021) | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of... | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | |
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1 (ISO 13500:2008/FDAM 1:2010) | |
| Petroleum and natural gas industries \x96 Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material \x96 Technical delivery conditions (ISO 13680:2020) | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Wavelength-dispersiv e X-ray fluorescence spectrometry \x96 Amendment 1: Addition of the SSD detector to the Monochromatic Excitation part of... | |
| Photovoltaic (PV) module safety qualification \x96 Part 1: Requirements for construction | |
| Photovoltaic (PV) module safety qualification \x96 Part 2: Requirements for testing | |
| Photovoltaic power generating systems \x96 EMC requirements and test methods for power conversion equipment | |
| Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2008/DAM 1:2013) | |
| Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2008/FDAM 1:2014) | |
| Plastics \x96 Symbols and abbreviated terms \x96 Part 4: Flame retardants \x96 Amendment 1 (ISO 1043-4:2021/DAM 1:2025) | |
| Plastics piping systems for hot and cold water installations \x96 Chlorinated poly(vinyl chloride) (PVC-C) \x96 Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations \x96 Chlorinated poly(vinyl chloride) (PVC-C) \x96 Part 3: Fittings \x96 Amendment 2 (ISO 15877-3:2009/DAM 2:2020) | |
| Plastics piping systems for hot and cold water installations \x96 Chlorinated poly(vinyl chloride) (PVC-C) \x96 Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 3: Fittings \x96 Amendment 2 (ISO 15875-3:2003/DAM 2:2020) | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations \x96 Crosslinked polyethylene (PE-X) \x96 Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations \x96 Polybutene (PB) \x96 Part 2: Pipes (ISO 15876-2:2017) | |
| Plastics piping systems for hot and cold water installations \x96 Polybutene (PB) \x96 Part 3: Fittings (ISO 15876-3:2017) | |
| Plastics piping systems for hot and cold water installations \x96 Polybutene (PB) \x96 Part 3: Fittings \x96 Amendment 2 (ISO 15876-3:2017/DAM 2:2020) | |
| Plastics piping systems for hot and cold water installations \x96 Polybutene (PB) \x96 Part 5: Fitness for purpose of the system (ISO 15876-5:2017) | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 1: General | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 2: Pipes \x96 Amendment 1 (ISO 15874-2:2013/FDAM 1:2018) | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 3: Fittings \x96 Amendment 1 (ISO 15874-3:2013/FDAM 1:2018) | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 3: Fittings \x96 Amendment 2 (ISO 15874-3:2013/DAM 2:2020) | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) \x96 Part 5: Fitness for purpose of the system \x96 Amendment 1 (ISO 15874-5:2013/FDAM 1:2018) | |
| Plastics piping systems for industrial applications \x96 Acrylonitrile-butadi ene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) \x96 Specifications for components and the system \x96 Metric series (ISO... | |
| Plastics piping systems for industrial applications \x96 Acrylonitrile-butadi ene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) \x96 Specifications for components and the system \x96 Metric series \x96... | |
| Plastics piping systems for industrial applications \x96 Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) \x96 Metric series for specifications for components and... | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks \x96 Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) | |
| Plywood - Specifications | |
| Power installations exceeding 1 kV AC and 1,5 kV DC \x96 Part 1: AC | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems \x96 Part 1: General requirements | |
| Power systems management and associated information exchange \x96 Data and communications security \x96 Part 4: Profiles including MMS and derivatives | |
| Powertrack systems \x96 Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting | |
| Powertrack systems \x96 Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation | |
| Pressure regulators for use with medical gases \x96 Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018) | |
| Process management for avionics \x96 Counterfeit prevention \x96 Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/DAM 1:2014) | |
| Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/FDAM 1:2015) | |
| Protective clothing \x96 General requirements \x96 Amendment 1 (ISO 13688:2013/DAM 1:2019) | |
| Protective clothing \x96 General requirements \x96 Amendment 1 (ISO 13688:2013/FDAM 1:2020) | |
| Protective clothing \x96 Protection against chemicals \x96 Measurement of cumulative permeation of chemicals with low vapour pressure through materials \x96 Amendment 1: Extraction and chemical analysis (ISO 19918:2017/DAM 1:2020) | |
| Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols \x96 Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits | |
| Protective clothing for firefighters \x96 Laboratory test methods and performance requirements for wildland firefighting clothing (ISO 15384:2018) | |
| Protective clothing for firefighters \x96 Physiological impact \x96 Part 1: Measurement of coupled heat and moisture transfer with the sweating torso \x96 Amendment 1 (ISO 18640-1:2018/DAM 1:2019) | |
| Protective clothing for firefighters \x96 Physiological impact \x96 Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters \x96 Amendment 1 (ISO 18640-2:2018/DAM 1:2019) | |
| Radiation protection instrumentation \x96 Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation | |
| Rapeseed \x96 Determination of chlorophyll content \x96 Spectrometric method | |
| Refrigerating systems and heat pumps \x96 Qualification of tightness of components and joints (ISO 14903:2017) | |
| Resilient floor coverings \x96 Specification for floor panels/assembly for loose laying (ISO 20326:2016) | |
| Resilient, textile and laminate floor coverings \x96 Classification | |
| Rice \x96 Determination of biometric characteristics of kernels \x96 Amendment 1 (ISO 11746:2012/FDAM 1:2017) | |
| Safety of machinery \x96 Functional safety of safety-related control systems | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Safety of toys \x96 Part 13: Olfactory board games, cosmetic kits and gustative games | |
| Safety of toys \x96 Part 14: Trampolines for domestic use | |
| Safety of toys \x96 Part 1: Mechanical and physical properties | |
| Safety of toys \x96 Part 3: Migration of certain elements | |
| Safety of toys \x96 Part 7: Finger paints \x96 Requirements and test methods | |
| Safety rules for the construction and installation of lifts \x96 Particular applications for passenger and goods passenger lift \x96 Part 70: Accessibility to lifts for persons including persons with disability... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x96 Sealed nickel-metal hydride cells and batteries for use in industrial applications \x96 Part 1: Performance | |
| Small craft - Man-overboard prevention and recovery - Amendment 1 (ISO 15085:2003/FDAmd 1:2009) | |
| Small craft \x96 Field of vision from the steering position (ISO 11591:2020) | |
| Small craft \x96 Field of vision from the steering position \x96 Amendment 1 (ISO 11591:2020/FDAM 1:2022) | |
| Small craft \x96 Man-overboard prevention and recovery | |
| Small craft \x96 Watertight or quick-draining recesses and cockpits (ISO 11812:2020) | |
| Small craft \x96 Watertight or quick-draining recesses and cockpits \x96 Amendment 1 (ISO 11812:2020/FDAM 1:2024) | |
| Soil quality \x96 Risk-based petroleum hydrocarbons \x96 Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) \x96 Amendment 1 (ISO 16558-1:2015/DAM... | |
| Soil quality \x96 Vocabulary \x96 Amendment 1 (ISO 11074:2015/FDAM 1:2019) | |
| Soil quality \x96 Vocabulary | |
| Solid biofuels \x96 Sample preparation (ISO 14780:2017) | |
| Solid biofuels \x96 Sample preparation \x96 Amendment 1 (ISO 14780:2017/FDAM 1:2019) | |
| Specification and qualification of welding procedures for metallic materials \x96 Welding procedure test \x96 Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys... | |
| Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 1-1: Radio disturbance and immunity measuring apparatus \x96 Measuring apparatus | |
| Specification for radio disturbance and immunity measuring apparatus and methods \x96 Part 1-4: Radio disturbance and immunity measuring apparatus \x96 Antennas and test sites for radiated disturbance measurements | |
| Specifications for particular types of winding wires \x96 Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | |
| Specifications for particular types of winding wires \x96 Part 27-1: Paper tape covered round copper wire | |
| Specifications for particular types of winding wires \x96 Part 27-2: Paper tape covered round aluminium wire | |
| Specifications for particular types of winding wires \x96 Part 27-3: Paper tape covered rectangular copper wire | |
| Specifications for particular types of winding wires \x96 Part 27-4: Paper tape covered rectangular aluminium wire | |
| Specifications for particular types of winding wires \x96 Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200 | |
| Specifications for particular types of winding wires \x96 Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 | |
| Specifications for particular types of winding wires \x96 Part 82: Polyesterimide enamelled rectangular copper wire, class 200 | |
| Stationary training equipment \x96 Part 9: Elliptical trainers, additional specific safety requirements and test methods \x96 Amendment 1 (ISO 20957-9:2016/DAM 1:2018) | |
| Sterile single-use intravascular introducers, dilators and guidewires \x96 Amendment 1 (ISO 11070:2014/DAM 1:2017) | |
| Sterilization of health care products \x96 Microbiological methods \x96 Part 1: Determination of a population of microorganisms on products \x96 Amendment 1 (ISO 11737-1:2018/DAM 1:2019) | |
| Sterilization of health care products \x96 Microbiological methods \x96 Part 1: Determination of a population of microorganisms on products \x96 Amendment 1 (ISO 11737-1:2018/FDAM 1:2020) | |
| Sterilization of health care products \x96 Radiation \x96 Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices \x96 Amendment 2: Revision to 4.3.4... | |
| Sterilization of health care products \x96 Radiation \x96 Part 2: Establishing the sterilization dose \x96 Amendment 1 (ISO 11137-2:2013/DAmd 1:2021) | |
| Sterilization of health care products \x96 Vocabulary \x96 Terms used in sterilization and related equipment and process standards (ISO 11139:2018) | |
| Sterilization of health-care products \x96 Ethylene oxide \x96 Requirements for the development, validation and routine control of a sterilization process for medical devices \x96 Amendment 1: Revision of Annex E,... | |
| Surface cleaning appliances \x96 Part 4: Cordless dry vacuum cleaners for household or similar use \x96 Methods for measuring the performance | |
| Surface cleaning appliances \x96 Part 7: Dry cleaning robots for household or similar use \x96 Methods for measuring the performance | |
| Surface mounted piezoelectric devices for frequency control and selection \x96 Standard outlines and terminal lead connections \x96 Part 2: Ceramic enclosures | |
| Switches for household and similar fixed electrical installations \x96 Part 2-1: Particular requirements \x96 Electronic control devices | |
| Systems for evacuation of plume generated by medical devices \x96 Amendment 1 (ISO 16571:2024/DAM 1:2025) | |
| Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval \x96 Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Textile floor coverings - Laboratory soiling tests - Part 2: Drum test | |
| Textile floor coverings \x96 Laboratory soiling tests \x96 Part 2: Drum test \x96 Amendment 1 (ISO 11378-2:2001/FDAM 1:2017) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests (ISO 20932-1:2018) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests \x96 Amendment 1 (ISO 20932-1:2018/FDAM 1:2021) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 3: Narrow fabrics \x96 Amendment 1 (ISO 20932-3:2018/DAM 1:2025) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of dimensions, squareness and linearity of preformed pipe insulation \x96 Amendment 1 (ISO 12628:2022/DAmd1:202 4) | |
| Thermal insulating products for building equipment and industrial installations \x96 Determination of dimensions, squareness and linearity of preformed pipe insulation \x96 Amendment 1 (ISO 12628:2022/FDAM 1:2025) | |
| Thermal performance of windows, doors and shutters \x96 Calculation of thermal transmittance \x96 Part 2: Numerical method for frames (ISO 10077-2:2017) | |
| Thermal-links \x96 Requirements and application guide | |
| Translation services \x96 Requirements for translation services \x96 Amendment 1 (ISO 17100:2015/DAmd 1:2016) | |
| Uninterruptible power systems (UPS) \x96 Part 1: Safety requirements | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions \x96 Amendment 1: Correction of puff profile requirements (ISO 20768:2018/DAmd1:202 4) | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions \x96 Amendment 1: Correction of puff profile requirements (ISO 20768:2018/FDAM 1:2025) | |
| Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) \x96 Electrical Testing | |
| Wearable electronic devices and technologies \x96 Part 201-4: Electronic textile \x96 Test method for determining sheet resistance of conductive fabrics after abrasion | |
| Welding \x96 Studs and ceramic ferrules for arc stud welding \x96 Amendment 1 (ISO 13918:2017/DAM 1:2018) | |
| Welding consumables \x96 Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels \x96 Classification (ISO 17633:2017) | |
| Wind energy generation systems \x96 Part 1: Design requirements | |
| Wind energy generation systems \x96 Part 24: Lightning protection | |
| Wind energy generation systems \x96 Part 5: Wind turbine blades | |
| Wind energy generation systems \x96 Part 6: Tower and foundation design requirements | |
| Winding wires \x96 Test methods \x96 Part 1: General | |
| Wood-based panels \x96 Determination of formaldehyde release \x96 Part 3: Gas analysis method (ISO 12460-3:2020) |
| << Prev | Next >> |