Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
400
450
500
550
600
650
670
680
690
700
710
720
724
725
726
727
728
729
730
731
732
733
734
735
736
740
750
760
770
780
790
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| 3D display devices \x96 Part 12-2: Measuring methods for stereoscopic displays using glasses \x96 Motion blur | |
| 3D displays \x96 Part 52-1: Fundamental measurement methods of aerial display \x96 Optical | |
| 3D displays \x96 Part 62-12: Measurement methods for virtual-image type \x96 Image quality | |
| Alarm and electronic security systems - Part 5-1: Alarm transmission systems - General requirements | |
| Alarm and electronic security systems - Part 5-2: Alarm transmission systems - Requirements for supervised premises transceiver (SPT) | |
| Alarm and electronic security systems - Part 5-3: Alarm transmission systems - Requirements for receiving centre transceiver (RCT) | |
| Alarm and electronic security systems - Social alarm systems - Part 1: System requirements | |
| Alarm and electronic security systems - Social alarm systems - Part 2: Trigger devices | |
| Alarm and electronic security systems - Social alarm systems - Part 3: Local unit and controller | |
| Alarm and electronic security systems - Social alarm systems - Part 5: Interconnections and communications | |
| Alarm and electronic security systems \x96 Part 11-2: Electronic access control systems \x96 Application guidelines | |
| Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive) | |
| Alarm systems - Intrusion and hold-up systems - Part 2-73: Intrusion detectors - Glass break detectors (active) | |
| Alarm systems - Part 2: Requirements for intruder alarm systems - Section 7: Passive glass-break detectors for use in buildings | |
| Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1: General requirements for systems | |
| Amendment 1 - Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships... | |
| Amendment 1 \x96 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 1: General requirements | |
| Amendment 1 \x96 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-1: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting on... | |
| Amendment 1 \x96 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting underfloor,... | |
| Amendment 1 \x96 Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-4: Particular requirements \x96 Service poles and service posts | |
| Amendment 1 \x96 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV \x96 Part 1: General requirements | |
| Amendment 1 \x96 Electric room heating \x96 Underfloor heating \x96 Performance characteristics \x96 Definitions, method of testing, sizing and formula symbols \x96 Enhanced sustainable performance aspects | |
| Amendment 1 \x96 Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 3: Circuit-breakers for DC operation | |
| Amendment 1 \x96 Global maritime distress and safety system (GMDSS) \x96 Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment \x96 Operational and performance requirements, methods... | |
| Amendment 1 \x96 Metallic communication cable test methods \x96 Part 4-10: Electromagnetic compatibility (EMC) \x96 Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets \x96 Double coaxial test method... | |
| Amendment 1 \x96 Metallic communication cable test methods \x96 Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance \x96 Triaxial method | |
| Amendment 1 \x96 Multicore and symmetrical pair/quad cables for digital communications \x96 Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz \x96 Horizontal floor wiring \x96... | |
| Amendment 1 \x96 Photovoltaic inverters \x96 Data sheet and name plate | |
| Amendment 1 \x96 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) \x96 Test... | |
| Amendment 1 \x96 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) \x96... | |
| Amendment 1 \x96 Residual current operated circuit-breakers for household and similar use \x96 Part 1: Outline of blocks and modules for residual current device standards | |
| Amendment 2 \x96 Global maritime distress and safety system (GMDSS) \x96 Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment \x96 Operational and performance requirements, methods... | |
| Amendment 2 \x96 Global maritime distress and safety system (GMDSS) \x96 Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships... | |
| Amendment 2 \x96 Metallic communication cable test methods \x96 Part 4-9: Electromagnetic compatibility (EMC) related test method for measuring coupling attenuation of screened balanced cables \x96 Triaxial method | |
| Amendment 2 \x96 Utility connections in port \x96 Part 1: High voltage shore connection (HVSC) systems \x96 General requirements | |
| Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector | |
| Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector | |
| Basic environmental testing procedures - Part 2: Tests - Test Ca: Damp heat, steady state with Amendment No. 1 (1984) | |
| Basic environmental testing procedures - Part 2: Tests - Test T: Soldering | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations \x96 Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment... | |
| Cable management systems \x96 Specifications for extra-heavy-duty electrical steel conduit fittings and accessories | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 2: Electromagnetic compatibility for equipment | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-1: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor... | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-3: Particular requirements \x96 Slotted cable trunking systems intended for installation in cabinets | |
| Cable trunking systems and cable ducting systems for electrical installations \x96 Part 2-4: Particular requirements \x96 Service poles and service posts | |
| Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil | |
| Calculation of thermally permissible shortcircuit currents, taking into account non-adiabatic heating effects | |
| Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV \x96 Part 1: General requirements | |
| Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV \x96 Part 2: Test methods | |
| Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV \x96 Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC... | |
| Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV \x96 Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 \x96 DC... | |
| Classification af environmental conditions - Classification of groups of environmental parameters and their severities - Ground vehicle installations | |
| Classification of environmental conditions \x96 Part 2: Environmental conditions appearing in nature \x96 Fauna and flora | |
| Classification of environmental conditions \x96 Part 2: Environmental conditions appearing in nature \x96 Solar radiation and temperature | |
| Classification of environmental conditions \x96 Part 3: Classification of groups of environmental parameters and their severities \x96 Introduction | |
| Classification of evironmental conditions \x96 Part 2: Environmental conditions appearing in nature \x96 Temperature and humidity | |
| Coaxial communication cable \x96 Part 1-125: Electrical test methods \x96 Test for equivalent permittivity and equivalent dissipation factor of dielectric | |
| Coaxial communication cables - Part 1-100: Electrical test methods - General requirements | |
| Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable | |
| Coaxial communication cables - Part 1-104: Electrical test methods - Test for the stability of the capacitance of cable versus temperature | |
| Coaxial communication cables - Part 1-106: Electrical test methods - Test for withstand voltage of cable sheath | |
| Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise) | |
| Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity | |
| Coaxial communication cables - Part 1-110: Electrical test methods - Test for continuity | |
| Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant | |
| Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance) | |
| Coaxial communication cables - Part 1-114: Electrical test methods - Test for inductance | |
| Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss) | |
| Coaxial communication cables - Part 1-116: Electrical test methods - Test for impedance with time domain reflectometry (TDR) | |
| Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables | |
| Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable | |
| Coaxial communication cables - Part 1-205: Environmental test methods - Resistance to solvents and contaminating fluids | |
| Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling | |
| Coaxial communication cables - Part 1-215: Environmental test methods - High temperature cable ageing | |
| Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality | |
| Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity | |
| Coaxial communication cables - Part 1-305: Mechanical test methods - Solderability and resistance to soldering | |
| Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals | |
| Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending | |
| Coaxial communication cables - Part 1-316: Mechanical test methods - Test of maximum pulling force of cable | |
| Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable | |
| Coaxial communication cables - Part 1-318: Mechanical test methods - Heat performance tests | |
| Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable | |
| Coaxial communication cables - Part 1-325: Mechanical test methods - Aeolian vibration | |
| Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements | |
| Coaxial communication cables \x96 Part 1-101: Electrical test methods \x96 Test for conductor d.c. resistance of cable | |
| Coaxial communication cables \x96 Part 1-102: Electrical test methods \x96 Test for insulation resistance of cable dielectric | |
| Coaxial communication cables \x96 Part 1-105: Electrical test methods \x96 Test for withstand voltage of cable dielectric | |
| Coaxial communication cables \x96 Part 1-111: Electrical test methods \x96 Stability of phase test methods | |
| Coaxial communication cables \x96 Part 1-113: Electrical test methods \x96 Test for attenuation constant | |
| Coaxial communication cables \x96 Part 1-119: Electrical test methods \x96 RF average power rating | |
| Coaxial communication cables \x96 Part 1-123: Electrical test methods \x96 Test for attenuation constant of radiating cable | |
| Coaxial communication cables \x96 Part 1-124: Electrical test methods \x96 Test for coupling loss of radiating cable | |
| Coaxial communication cables \x96 Part 1-126: Electrical test methods \x96 Corona extinction voltage | |
| Coaxial communication cables \x96 Part 1-127: Electrical test methods \x96 Link loss of radiating cable | |
| Coaxial communication cables \x96 Part 1-128: Electrical test methods \x96 Polarization directivity of radiating cable | |
| Coaxial communication cables \x96 Part 1-200: Environmental test methods \x96 General requirements | |
| Coaxial communication cables \x96 Part 1-206: Environmental test methods \x96 Climatic sequence | |
| Coaxial communication cables \x96 Part 1-212: Environmental test methods \x96 UV stability | |
| Coaxial communication cables \x96 Part 1-303: Mechanical test methods \x96 Test for silver and tin plating thickness | |
| Coaxial communication cables \x96 Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric | |
| Coaxial communication cables \x96 Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric | |
| Coaxial communication cables \x96 Part 12: Specification for spacer clamps for radiating cables | |
| Coaxial communication cables \x96 Part 13 \x96 Sectional specification for semi-rigid cables with silicon dioxide dielectric | |
| Coaxial communication cables \x96 Part 4-1: Blank detail specification for radiating cables | |
| Coaxial communication cables \x96 Part 4: Sectional specification for radiating cables | |
| Coaxial communication cables \x96 Part 5: Sectional specification for CATV trunk and distribution cables | |
| Coaxial communication cables \x96 Part 6-1: Blank detail specification for CATV drop cables | |
| Coaxial communication cables \x96 Part 6-2: Detail specification for 75-4 type CATV drop cables | |
| Coaxial communication cables \x96 Part 6-3: Detail specification for type 75-5 CATV drop cables | |
| Coaxial communication cables \x96 Part 6-4: Detail specification for 75-7 type CATV drop cables | |
| Coaxial communication cables \x96 Part 6-5: Detail specification for Type A quad-shield CATV drop cables with screening class A++ | |
| Coaxial communication cables \x96 Part 6: Sectional specification for CATV drop cables | |
| Coaxial communication cables \x96 Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 11801-4 \x96 Indoor drop cables for systems operating at 5 MHz \x96 6... | |
| Coaxial communication cables \x96 Part 8-1: Blank detail specification for semi-flexible cables with fluoropolymer dielectric | |
| Coaxial communication cables \x96 Part 8: Sectional specification for semi-flexible cables with fluoropolymer dielectric | |
| Coaxial communication cables \x96 Part 9-1: Flexible RF coaxial cables \x96 Blank detail specification | |
| Coaxial communication cables \x96 Part 9-2: Detail specification for 50-0,4 type RF flexible cables | |
| Coaxial communication cables \x96 Part 9: Sectional specification for flexible RF coaxial cables | |
| Common clauses for high-voltage switchgear and controlgear standards | |
| Common test methods for insulating and sheeting materials of electric cables - Part 5: Methods specific to filling compounds - Section One: Drop point - Separation of oil - Lower... | |
| Connectors for electrical and electronic equipment \x96 Part 01: Rectangular connectors \x96 Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to... | |
| Connectors for electrical and electronic equipment \x96 Part 2: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type... | |
| Connectors for electrical and electronic equipment \x96 Part 4: Detail specification for shielded or unshielded, free and fixed connectors with up to 8 ways for balanced single-pair data transmission with... | |
| Connectors for electrical and electronic equipment \x96 Part 7: Detail specification for up to 7 ways including PE or FE (data/power) and shield pin, free and fixed circular connectors for... | |
| Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification | |
| Connectors for electronic equipment \x96 Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity... | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 2-114: Circular connectors \x96 Detail specification for data and power connectors with M8 screw-locking | |
| Connectors for electronic equipment \x96 Product requirements \x96 Part 3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors | |
| Converter transformers - Part 3: Application guide | |
| Corrigendum 1 \x96 Industrial communication networks \x96 Network and system security \x96 Part 3-3: System security requirements and security levels | |
| Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communication devices, 30 MHz to 6 GHz \x96 Part 4: General requirements for using the finite... | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 1-1: Architecture and protocols \x96 Core architecture and protocols | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 1-2: Architecture and protocols \x96 Extended Digital Media Renderer | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 1-3: Architectures and protocols \x96 Cloud access | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 10: Low-power mode | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 6-1: Remote User Interface \x96 HTML5 | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 6-2: Remote user interface \x96 RVU | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 7: Authentication | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 8: Diagnostics | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines \x96 Part 9: HTTP Adaptive Delivery | |
| Display lighting unit \x96 Part 2-4: Electro-optical measuring methods of laser module | |
| Display lighting unit \x96 Part 2-5: Measurement method for optical quantities of non-planar light sources | |
| Durability test methods for electronic displays \x96 Part 2-21: Environmental tests \x96 Test methods for heat and humidity | |
| Durability test methods for electronic displays \x96 Part 2-23: Environmental tests \x96 Outdoor weathering | |
| Durability test methods for electronic displays \x96 Part 3-2: Mechanical tests \x96 Static stress | |
| Durability test methods for electronic displays \x96 Part 3-5: Mechanical tests \x96 Surface durability | |
| Dynamic modules - Part 4-1: Software and hardware interface - 1 \xd7 9 wavelength selective switch | |
| Effects of current on human beings and livestock \x96 Part 1: General aspects | |
| Effects of current on human beings and livestock \x96 Part 2: Special aspects | |
| Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: General requirements | |
| Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: Test methods | |
| Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords) | |
| Electric cables \x96 Calculation of the current rating \x96 Part 1-1: Current rating equations (100 % load factor) and calculation of losses \x96 General | |
| Electric cables \x96 Calculation of the current rating \x96 Part 1-2: Current rating equations (100 % load factor) and calculations of losses \x96 Sheath eddy current loss factors for two... | |
| Electric cables \x96 Calculation of the current rating \x96 Part 1-3: Current rating equations (100 % load factor) and calculation of losses \x96 Current sharing between parallel single-core cables and... | |
| Electric cables \x96 Calculation of the current rating \x96 Part 2-1: Thermal resistance \x96 Calculation of the thermal resistance | |
| Electric cables \x96 Calculation of the current rating \x96 Part 2-3: Thermal resistance \x96 Cables installed in ventilated tunnels | |
| Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC | |
| Electric dishwashers for household use \x96 Methods for measuring the performance | |
| Electric railway equipment - Train bus - Part 1: Train communication network | |
| Electric room heating - Underfloor heating - Performance characteristics - Definitions, method of testing, sizing and formula symbols | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 3: Circuit-breakers for DC operation | |
| Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull | |
| Electrical and electronic installations in ships \x96 Electromagnetic compatibility (EMC) \x96 Ships with a non-metallic hull | |
| Electrical installations in ships - Part 101: Definitions and general requirements | |
| Electrical installations in ships - Part 501: Special features - Electric propulsion plant | |
| Electrical installations in ships \x96 Part 378: Optical fiber cables | |
| Electrical installations in ships \x96 Part 503: Special features \x96 AC supply systems with voltages in the range of above 1 kV up to and including 36 kV | |
| Electrical installations in ships \x96 Part 504: Automation, control and instrumentation | |
| Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations | |
| Electricity metering \x96 Payment systems \x96 Part 41: Standard transfer specification (STS) \x96 Application layer protocol for one-way token carrier systems | |
| Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low voltage power supply systems for equipment with rated current greater than 16A | |
| Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters | |
| Electromagnetic compatibility (EMC) \x96 Part 2-10: Environment \x96 Description of HEMP environment \x96 Conducted disturbance | |
| Electromagnetic compatibility (EMC) \x96 Part 5-6: Installation and mitigation guidelines \x96 Mitigation of external EM influences | |
| Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications | |
| Electromagnetic compatibility for industrial process mea surement and control equipment \x96 Part 2: Electrostatic disc harge requirements | |
| Electronic displays \x96 Part 2-11: Measurement of optical characteristics \x96 Local luminance and uniformity | |
| Electronic displays \x96 Part 2-1: Measurements of optical characteristics \x96 Fundamental measurements | |
| Electronic displays \x96 Part 2-2: Measurements of optical characteristics \x96 Ambient performance | |
| Electronic displays \x96 Part 2-7: Measurements of optical characteristics \x96 Tiled displays | |
| Electronic displays \x96 Part 3-6: Evaluation of optical performance \x96 Spatial resolution | |
| Enterprise-control system integration \x96 Part 6: Messaging Service Model | |
| Environmental testing - Part 3: Guidance - Seismic test methods for equipments | |
| Extra heavy-duty electrical rigid steel conduits | |
| Eyewear display \x96 Part 1-2: Generic \x96 Terminology | |
| Eyewear display \x96 Part 20-10: Fundamental measurement methods \x96 Optical properties | |
| Eyewear display \x96 Part 20-20: Fundamental measurement methods \x96 Image quality | |
| Eyewear display \x96 Part 22-20: Specific measurement methods for AR type \x96 Image quality | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode... | |
| Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors - Detail specification... | |
| Fibre optic interconnecting devices and passive components performance standard -- Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test | |
| Fibre optic interconnecting devices and passive components performance standard \x96 Part 1-3: General and guidance for performance standards \x96 Single-mode fibre optic connector performance for harsh industrial operating conditions | |
| Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed chip resistors | |
| Flexible display devices \x96 Part 6-1: Mechanical test methods \x96 Deformation tests | |
| Flexible displays devices \x96 Part 6-23: Mechanical test methods \x96 Mechanical misaligned folding test method | |
| Functional performance criteria for AAL robots used in connected home environment | |
| General methods of measurement for digital television receivers | |
| General safety requirements for residual current operated protective devices \x96 Group safety publication | |
| Generic specification of information on products \x96 Part 1: Principles and methods | |
| Global maritime distress and safety system (GMDSS) - Part 15: Inmarsat FB500 ship earth station - Operational and performance requirements, methods of testing and required test results | |
| Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) | |
| Global maritime distress and safety system (GMDSS) \x96 Part 16: Ship earth stations operating in mobile-satellite systems recognized for use in the GMDSS \x96 Operational and performance requirements, methods of... | |
| Global maritime distress and safety system (GMDSS) \x96 Part 2: Cospas-Sarsat EPIRB \x96 Emergency position indicating radio beacon operating on 406 MHz \x96 Operational and performance requirements, methods of testing... | |
| Global maritime distress and safety system (GMDSS) \x96 Part 3: Digital selective calling (DSC) equipment \x96 Operational and performance requirements, methods of testing and required test results | |
| Global maritime distress and safety system (GMDSS) \x96 Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment \x96 Operational and performance requirements, methods of testing and... | |
| Global maritime distress and safety system (GMDSS) \x96 Part 7: Shipborne VHF radiotelephone transmitter and receiver \x96 Operational and performance requirements, test methods and required test results | |
| Global maritime distress and safety system (GMDSS) \x96 Part 9: Shipborne transmitters and receivers for use in the MF and HF bands suitable for telephony, digital selective calling (DSC) and... | |
| Graphical symbols for diagrams - Database | |
| Guidance for the selection of high-voltage A.C. cable systems | |
| Guidance on human factors engineering for system life cycle applications | |
| Guide for the Application, Specification and Testing of Phase-Shifting Transformers | |
| Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results | |
| Guide for the statistical analysis of electrical insulation breakdown data | |
| Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V \x96 Part 1: General requirements and cables | |
| Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V \x96 Part 2: Test methods | |
| Health software \x96 Part 1: General requirements for product safety | |
| Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation | |
| Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation | |
| Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type beta format | |
| High voltage direct current (HVDC) power transmission \x96 Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications \x96 Test methods and requirements... | |
| High-voltage switchgear and controlgear - Part 37-013: Alternating-current generator circuit-breakers | |
| High-voltage switchgear and controlgear - Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers | |
| High-voltage switchgear and controlgear \x96 Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV | |
| High-voltage switchgear and controlgear \x96 Part 37-013: Alternating current generator circuit-breakers | |
| Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1: General | |
| Household and similar electrical appliances - Safety - Part 1: General requirements | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-114: Particular requirements for selfbalancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-115: Particular requirements for skin beauty care appliances | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-116: Particular requirements for furniture with electrically motorized parts | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-118: Particular requirements for professional ice-cream makers | |
| Household appliances network and grid connectivity \x96 Part 1: General requirements, generic data modelling and neutral messages | |
| Household appliances network and grid connectivity \x96 Part 2: Product specific mappings, details, requirements and deviations | |
| Household appliances network and grid connectivity \x96 Part 3-1: Specific Data Model Mapping: SPINE and SPINE-IoT | |
| Household appliances network and grid connectivity \x96 Part 4-1: Communication Protocol Specific Aspects: SPINE, SPINE-IoT and SHIP | |
| Hybrid communication cables \x96 Part 3-10: Outdoor hybrid cables \x96 Family specification for FTTA hybrid communication cables | |
| Hybrid telecommunication cables \x96 Part 3: Outdoor hybrid cables \x96 Sectional specification | |
| Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels | |
| Industrial communication networks \x96 Network and system security \x96 Part 2-1: Establishing an industrial automation and control system security program | |
| Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | |
| Integrating-averagin g sound level meters | |
| Laser display devices \x96 Part 5-3: Measuring methods of image quality for laser projection displays | |
| Laser displays \x96 Part 5-1: Measurement of optical performance for laser front projection | |
| Laser displays \x96 Part 5-6: Measuring methods for optical performance of projection screens | |
| Laser displays \x96 Part 5-7: Measuring methods of image quality affected by speckle for scanning laser displays | |
| Line traps for a.c. power systems | |
| Liquid crystal display devices \x96 Part 30-3: Measuring methods for liquid crystal display modules \x96 Motion artefact measurement of active matrix liquid crystal display modules | |
| Liquid crystal display devices \x96 Part 30-5: Optical measuring methods of transmissive transparent LCD modules | |
| Liquid crystal display devices \x96 Part 40-1: Mechanical testing of display cover glass for mobile devices \x96 Guidelines | |
| Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations | |
| Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples | |
| Low-frequency cables and wires with PVC insulation and PVC sheath \x96 Part 1: General test and measuring methods | |
| Low-voltage electrical installations \x96 Part 7-713: Requirements for special installations or locations \x96 Furniture | |
| Magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure \x96 Measurement procedures | |
| Magnetic materials \x96 Part 8-4: Specifications for individual materials \x96 Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state | |
| Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 100: Single talker and multiple listeners - Extra requirements to IEC 61162-1 for the UAIS | |
| Maximum power point tracking efficiency of grid connected photovoltaic inverters | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements... | |
| Measurement procedures for materials used in photovoltaic modules \x96 Part 1-1: Encapsulants \x96 Polymeric materials used for encapsulation | |
| Medical electrical equipment \x96 Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograp hs \x96 Amendment 1 | |
| Medical electrical equipment \x96 Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograp hs | |
| Medical electrical equipment \x96 Radiation dose documentation \x96 Part 1: Equipment for radiography and radioscopy | |
| Metallic cables and other passive components \x96 Test methods \x96 Part 4-17: Electromagnetic compatibility (EMC) \x96 Reduction Factor | |
| Metallic cables and other passive components \x96 Test methods \x96 Part 4-8: Electromagnetic compatibility (EMC) \x96 Capacitive coupling admittance | |
| Metallic cables and other passive components test methods \x96 Part 4-6: Electromagnetic compatibility (EMC) \x96 Surface transfer impedance \x96 Line injection method | |
| Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method | |
| Metallic communication cable test methods - Part 4-14: Electromagnetic compatibility (EMC) - Coupling attenuation of cable assemblies (Field conditions) absorbing clamp method | |
| Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method | |
| Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method | |
| Metallic communication cable test methods \x96 Part 4 \x96 9: Electromagnetic compatibility (EMC) \x96 Coupling attenuation of screened balanced cables, triaxial method | |
| Metallic communication cable test methods \x96 Part 4-15: Electromagnetic compatibility (EMC) \x96 Test method for measuring transfer impedance and screening attenuation \x96 or coupling attenuation with triaxial cell | |
| Metallic communication cable test methods \x96 Part 4-16: Electromagnetic compatibility (EMC) \x96 Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation... | |
| Methods of test for the determination of flammability of solid electrical insulating materials when exposed to an igniting source | |
| Methods of test for volume resistivity of solid electrical insulating materials | |
| Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units | |
| Mobile and fixed offshore units \x96 Electrical installations \x96 Part 1: General requirements and conditions | |
| Mobile and fixed offshore units \x96 Electrical installations \x96 Part 2: System design | |
| Mobile and fixed offshore units \x96 Electrical installations \x96 Part 3: Equipment | |
| Mobile and fixed offshore units \x96 Electrical installations \x96 Part 4: Cables | |
| Mobile and fixed offshore units \x96 Electrical installations \x96 Part 6: Installation | |
| Mobile and fixed offshore units \x96 Electrical installations \x96 Part 7: Hazardous areas | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification... | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification... | |
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Capability approval - Sectional... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Blank detail specification... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Capability approval - Sectional... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Blank detail specification for digital and analog... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1200 MHz - Blank detail specification for digital and analog communication... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Quality assessment procedure - Sectional specification for... | |
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1200 MHz - Quality assessment procedure - Sectional specification for digital... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 10: Cables for cords with transmission characteristics up to 2 GHz \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 12: Symmetrical single pair cables with transmission characteristics up to 600 MHz \x96 work area wiring | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 13: Symmetrical single pair cables with transmission characteristics up to 20 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 14: Symmetrical single pair cables with transmission characteristics up to 20 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 15: Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 1: Generic specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Blank detail specification for digital and analog... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Quality assessment procedure \x96 Sectional specification for... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Sectional specification for digital and analog communication... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 7: Symmetrical pair cables with transmission characteristics up to 1200 MHz \x96 Sectional specification for digital and analog communication cables... | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 8: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz \x96 Work area wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications \x96 Part 9: Cables for channels with transmission characteristics up to 2 GHz \x96 Sectional specification | |
| Multimedia home network configuration \x96 Basic reference model \x96 Part 2: Operational model | |
| Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation | |
| Photovoltaic (PV) arrays \x96 Design requirements | |
| Photovoltaic inverters - Data sheet and name plate | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 1: General requirements | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-1: Particular requirements for fused plugs | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-2: Particular requirements for socket-outlets for appliances | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-5: Particular requirements for adaptors | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-7: Particular requirements for cord extension sets | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-8: Particular requirements for socket-outlets for furniture | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 3-1: Particular requirements for socket-outlets incorporating USB power supply | |
| Plugs, socket-outlets and couplers with arcuate contacts | |
| Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) \x96 Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V \x96 Part 1: General requirements | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V \x96 Part 3: Non-sheathed cables for fixed wiring | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V \x96 Part 5: Flexible cables (cords) | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V \x96 Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages... | |
| Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um=170 kV) up to 500 kV (Um=550 kV) - Test methods and requirements | |
| Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<sub>m</sub>= 36 kV) up to 150 kV (U<sub>m</sub> = 170 kV) \x96 Test methods and requirements... | |
| Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and... | |
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables... | |
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) \x96 Part 1: Cables... | |
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) \x96 Part 4: Test... | |
| Precision clock synchronization protocol for networked measurement and control systems | |
| Printed electronics \x96 Part 203-2: Materials \x96 Semiconductor ink \x96 Space charge limited mobility measurement in printed organic semiconductive layers | |
| Protection against lightning \x96 Thunderstorm warning systems | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 1: Modulation characteristics and baseband coding | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 2: Message format: Coding and definition of RDS features | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 3: Usage and registration of Open Data Applications (ODAs) | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 4: Registered code tables | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 5: Marking of RDS receiver devices | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 6: Compilation of technical specifications for Open Data Applications in... | |
| Radio Data System (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz \x96 Part 9: RBDS \x96 RDS variant used in North America | |
| Radio interference characteristics of overhead power lines and high-voltage equipment \x96 Part 1: Description of phenomena | |
| Radio interference characteristics of overhead power lines and high-voltage equipment \x96 Part 2: Methods of measurement and procedure for determining limits | |
| Radio interference characteristics of overhead power lines and high-voltage equipment \x96 Part 3: Code of practice for minimizing the generation of radio noise | |
| Radio-frequency cables - Part 0: Guide to the design of detail specifications - Section 1: Coaxial cables | |
| Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems | |
| Railway applications - Direct current signalling monostable relays of type N and type C | |
| Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock | |
| Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems | |
| Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems | |
| Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV | |
| Railway applications - Fixed installations - Traction transformers | |
| Railway applications - Radio remote control system of traction vehicles for shunting application | |
| Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles | |
| Railway applications \x96 Communication, signalling and processing systems \x96 Safety related electronic systems for signalling | |
| Railway applications \x96 Compatibility between rolling stock and train detection systems | |
| Railway applications \x96 Current collection systems \x96 Pantographs, testing methods for contact strips | |
| Railway applications \x96 Current collection systems \x96 Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line | |
| Railway applications \x96 DC surge arresters and voltage limiting devices \x96 Part 1: Metal-oxide surge arresters without gaps | |
| Railway applications \x96 DC surge arresters and voltage limiting devices \x96 Part 2: Voltage limiting devices | |
| Railway applications \x96 Direct current signalling monostable relays \x96 Part 2: Spring type relays | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 1: General | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 2: Emission of the whole railway system to the outside world | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 3-1: Rolling stock \x96 Train and complete vehicle | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 3-2: Rolling stock \x96 Apparatus | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Railway applications \x96 Electromagnetic compatibility \x96 Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Railway applications \x96 Energy measurement on board trains \x96 Part 1: General | |
| Railway applications \x96 Energy measurement on board trains \x96 Part 2: Energy measurement | |
| Railway applications \x96 Energy measurement on board trains \x96 Part 3: Data handling | |
| Railway applications \x96 Energy measurement on board trains \x96 Part 4: Communication | |
| Railway applications \x96 Energy measurement on board trains \x96 Part 5: Conformance test | |
| Railway applications \x96 Energy measurement on board trains \x96 Part 6: Requirements for purposes other than billing | |
| Railway applications \x96 Fixed installations \x96 Electric traction \x96 Copper and copper alloy grooved contact wires | |
| Railway applications \x96 Fixed installations \x96 Electronic power converters \x96 Part 3-1: AC traction applications \x96 Electronic power compensators | |
| Railway applications \x96 Fixed installations \x96 Electronic power converters for substations | |
| Railway applications \x96 Fixed installations \x96 Particular requirements for AC switchgear \x96 Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV | |
| Railway applications \x96 Fixed installations \x96 Particular requirements for AC switchgear \x96 Part 3-1: Measurement, control and protection devices for specific use in AC tractions systems \x96 Devices | |
| Railway applications \x96 Fixed installations \x96 Particular requirements for AC switchgear \x96 Part 3-2: Measurement, control and protection devices for specific use in AC traction systems \x96 Current transformers | |
| Railway applications \x96 Fixed installations \x96 Particular requirements for AC switchgear \x96 Part 3-3: Measurement, control and protection devices for specific use in AC traction systems \x96 Voltage transformers | |
| Railway applications \x96 Rolling stock \x96 Batteries for auxiliary power supply systems \x96 Part 1: General requirements | |
| Railway applications \x96 Rolling stock \x96 DC supplied electronic ballasts for lighting fluorescent lamps | |
| Railway applications \x96 Rolling stock \x96 Electrical connectors \x96 Requirements and test methods | |
| Railway applications \x96 Rolling stock \x96 Pantographs \x96 Characteristics and tests \x96 Part 2: Pantographs for metros and light rail vehicles | |
| Railway applications \x96 Rolling stock \x96 Protective provisions against electrical hazards | |
| Railway applications \x96 Rolling stock \x96 Rules for installation of cabling | |
| Railway applications \x96 Rolling stock \x96 Testing of rolling stock on completion of construction and before entry into service | |
| Real-time Ethernet PROFINET IO | |
| Real-time Ethernet TCnet (Time-Critical Control Network) | |
| Real-time Ethernet Vnet/IPTM specification | |
| Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems | |
| Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system | |
| Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses | |
| Residual current operated circuit-breakers for household and similar use \x96 Part 1: Outline of blocks and modules for residual current device standards | |
| Residual current operated circuit-breakers for household and similar use \x96 Part 2: Residual current devices (RCDs) \x96 Vocabulary | |
| Residual current operated circuit-breakers for household and similar use \x96 Part 3-1: Particular requirements for RCDs with screwless-type terminals for external copper conductors | |
| Residual current operated circuit-breakers for household and similar use \x96 Part 3-2: Particular requirements for RCDs with flat quick-connect terminations | |
| Residual current operated circuit-breakers for household and similar use \x96 Part 3-3: Specific requirements for devices with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for... | |
| Residual current operated circuit-breakers for household and similar use \x96 Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for... | |
| Round wire concentric lay overhead electrical stranded conductors | |
| Semiconductor devices - Integrated circuits - Part 11: Sectional specification for semiconductor integrated circuits excluding hybrid circuits | |
| Semiconductor devices - Integrated circuits - Part 20: Generic specification for film integrated circuits and hybrid film integrated circuits | |
| Semiconductor devices - Integrated circuits - Part 21: Section one: Blank detail specifications for film integrated circuits and hybrid film integrated circuits on the basis of qualification approval procedure | |
| Semiconductor devices - Integrated circuits - Part 21: Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of qualification approval procedure | |
| Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits - Section six: Blank detail specification for microprocessor integrated circuits | |
| Semiconductor devices - Integrated circuits - Part 3: Analogue integrated circuits - Section one: Blank detail specification for monolithic integrated operational amplifiers | |
| Semiconductor devices - Integrated circuits - Part 3: analogue integrated circuits | |
| Semiconductor devices - Integrated circuits - Part 4: Interface integrated circuits | |
| Semiconductor devices \x96 Reliability test method by inductive load switching for gallium nitride transistors | |
| Semiconductor devices \x96 Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors \x96 Part 2: Test method for bipolar degradation due to body diode operation | |
| Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um=36 kV) | |
| Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um=7,2 kV) up to 30 kV (Um=36 kV) | |
| Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | |
| Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um=1,2 kV) and 3 kV (Um=3,6 kV) | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits... | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods | |
| Specification for the testing of balanced and coaxial information technology cabling \x96 Part 1-1: Additional requirements for the measurement of transverse conversion loss and equal level transverse conversion transfer loss... | |
| Specification for the testing of balanced and coaxial information technology cabling \x96 Part 1-2: Installed balanced cabling as specified in ISO/IEC 11801 \x96 Additional requirements for measurement of resistance unbalance... | |
| Specification for the testing of balanced and coaxial information technology cabling \x96 Part 2-22: Category 6A cords as specified in ISO/IEC 11801-1 \x96 Blank detail specification | |
| Specification for the testing of balanced and coaxial information technology cabling \x96 Part 2: Cords as specified in ISO/IEC 11801-1 and related standards | |
| Specification for vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements | |
| Specification for vulcanized fibre for electrical purposes \x96 Part 2: Methods of test | |
| Specification for vulcanized fibre for electrical purposes \x96 Part 3: Specifications for individual materials \x96 Sheet 1: Flat sheets | |
| Specifications for SELV DC systems conforming to the ESMAP multi-tier framework tier 2 and tier 3 requirements for household electricity supply | |
| Standard data element types with associated classification scheme \x96 Part 7: Data dictionary of cross-domain concepts | |
| Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands | |
| Station Service Voltage Transformers (SSVT) | |
| Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 60 kV (Um = 72,5 kV) \x96 Test methods... | |
| Subsea equipment \x96 Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV) | |
| Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV \x96 Test methods and requirements | |
| Surface cleaning appliances \x96 Part 2: Dry vacuum cleaners for household or similar use \x96 Methods for measuring the performance | |
| Tap-changers \x96 Part 2: Application guidelines | |
| Test method for evaluating thermal endurance of flexible sheet materials using the wrapped tube method | |
| Test methods for electric cables with rated voltages up to and including 450/750 V | |
| Test on gases evolved during combustion of materials from cables \x96 Part 3: Measurement of low level of halogen content by ion chromatography | |
| Tests for electric cables under fire conditions \x96 Circuit integrity \x96 Part 1: Test method for fire with shock at a temperature of at least 830\xb0C for cables of rated... | |
| Tests for electric cables under fire conditions \x96 Circuit integrity \x96 Part 2: Test method for fire with shock at a temperature of at least 830\xb0C for cables of rated... | |
| Tests for electric cables under fire conditions \x96 Circuit integrity \x96 Part 3: Test method for fire with shock at a temperature of at least 830\xb0C for cables of rated... | |
| Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | |
| Tests on electric cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D | |
| Touch and interactive displays \x96 Part 12-10: Measurement methods of touch displays \x96 Touch and electrical performance | |
| Touch and interactive displays \x96 Part 12-20: Measuring methods of touch displays \x96 Multi-touch performance | |
| Touch and interactive displays \x96 Part 22-10: Measuring methods of fingerprint recognition performance \x96 Under-display optical imaging fingerprint sensing | |
| Twinax cables for digital communications \x96 Part 1-1: Time domain test methods for twinax cables for digital communications \x96 General requirements | |
| Twinax cables for digital communications \x96 Part 1: Generic specification | |
| Utility connections in port \x96 Part 1: High voltage shore connection (HVSC) systems \x96 General requirements \x96 Amendment 1: Utility connections in port | |
| Utility connections in port \x96 Part 1: High voltage shore connection (HVSC) systems \x96 General requirements | |
| Utility connections in port \x96 Part 2: High and low voltage shore connection systems \x96 Data communication for monitoring and control | |
| Video surveillance systems for use in security applications \x96 Part 4: Application guidelines | |
| Workplace atmospheres \x96 Part 1: Gas detectors \x96 Performance requirements of detectors for toxic gases |
| << Prev | Next >> |