Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
620
630
640
650
660
670
679
680
681
682
683
684
685
686
687
688
689
690
691
700
710
720
730
740
750
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| Absorbent incontinence products for urine and/or faeces \x96 Product type names and illustrations (ISO 22748:2021) | |
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly | |
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism | |
| Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) | |
| Acoustics \x96 Hearing aid fitting management (HAFM) (ISO 21388:2020) | |
| Acoustics \x96 Hearing Aid Fitting Management \x96 Part 2: Tele-services as part of hearing aid fitting management (tHAFM) (ISO 21388-2:2024) | |
| Adhesives \x96 Adhesives for floor coverings \x96 Requirements for mechanical and electrical performance (ISO 22636:2020) | |
| Adhesives \x96 Test method for adhesives for floor and wall coverings \x96 Peel test (ISO 22631:2019) | |
| Adhesives \x96 Test method for adhesives for floor and wall coverings \x96 Shear test (ISO 22632:2019) | |
| Adhesives \x96 Test method for adhesives for plastic or rubber floor coverings or wall coverings \x96 Determination of dimensional changes after accelerated ageing (ISO 22635:2019) | |
| Adhesives \x96 Test methods for adhesives for floor coverings and wall coverings \x96 Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019) | |
| Adhesives \x96 Test of adhesive for floor covering \x96 Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019) | |
| Anaesthetic and respiratory equipment \x96 Air entrainment devices (ISO 23372:2022) | |
| Anaesthetic and respiratory equipment \x96 Cuff pressure indication, control and regulation devices (ISO 23371:2022) | |
| Anaesthetic and respiratory equipment \x96 Voice prostheses (ISO 21917:2021) | |
| Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter and plain chocolate - Part 1: Determination of the presence of cocoa butter equivalents | |
| Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter and plain chocolate - Part 2: Quantification of cocoa butter equivalents | |
| Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection | |
| Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method | |
| Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope | |
| Anodizing of aluminium and its alloys \x96 Estimation of loss of absorptive power of anodic oxidation coatings after sealing \x96 Dye-spot test with prior acid treatment | |
| Assistive products \x96 General requirements and test methods (ISO 21856:2022) | |
| Assistive products \x96 Guidelines on cognitive accessibility \x96 Daily time management (ISO 21802:2019) | |
| Basic semen examination \x96 Specification and test methods (ISO 23162:2021) | |
| Blast chiller and freezer cabinets for professional use \x96 Classification, requirements and test conditions (ISO 22042:2021) | |
| Blast chiller and freezer cabinets for professional use \x96 Classification, requirements and test conditions \x96 Amendment 1 (ISO 22042:2021/Amd 1:2024) | |
| Blockchain and distributed ledger technologies \x96 Vocabulary (ISO 22739:2020) | |
| Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance | |
| Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects | |
| Building information modelling (BIM) \x96 Data templates for construction objects used in the life cycle of built assets \x96 Concepts and principles (ISO 23387:2020) | |
| Building information modelling and other digital processes used in construction \x96 Methodology to describe, author and maintain properties in interconnected data dictionaries (ISO 23386:2020) | |
| Carbon based films \x96 Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry (ISO 23216:2021) | |
| Cereals, pulses and by-products \x96 Determination of ash yield by incineration | |
| Cheese and processed cheese products, caseins and caseinates \x96 Determination of fat content \x96 Gravimetric method (ISO 23319:2022) | |
| Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica | |
| Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis | |
| Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 1: General information, terminology and sample preparation (ISO 21068-1:2024) | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 2: Determination of volatile components, total carbon, free carbon, silicon carbide, total and free... | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2024) | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x96 Part 4: XRD methods (ISO 21068-4:2024) | |
| Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents... | |
| Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical... | |
| Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic... | |
| Chemicals for the leather tanning industry \x96 Determination of the total content of certain bisphenols (ISO 21135:2024) | |
| Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration | |
| Cognitive accessibility \x96 Part 1: General guidelines (ISO 21801-1:2020) | |
| Cognitive accessibility \x96 Part 2: Reporting (ISO 21801-2:2022) | |
| Commercial beverage coolers \x96 Classification, requirements and test conditions (ISO 22044:2021) | |
| Conference systems \x96 Equipment \x96 Requirements (ISO 22259:2019) | |
| Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals | |
| Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining | |
| Corrosion of metals and alloys \x96 Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019) | |
| Corrosion tests in artificial atmospheres \x96 Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015) | |
| Cosmetics - Microbiology - Detection of Escherichia coli | |
| Cosmetics - Microbiology - Detection of Pseudomonas aeruginosa | |
| Cosmetics - Microbiology - Detection of Staphylococcus aureus | |
| Cosmetics \x96 Analytical methods \x96 Measurement of traces of heavy metals in cosmetic finished products using ICP/MS technique (ISO 21392:2021) | |
| Cosmetics \x96 Good Manufacturing Practices (GMP) \x96 Guidelines on Good Manufacturing Practices | |
| Cosmetics \x96 Microbiology \x96 Detection of Escherichia coli \x96 Amendment 1 (ISO 21150:2015/Amd 1:2022) | |
| Cosmetics \x96 Microbiology \x96 Detection of Pseudomonas aeruginosa \x96 Amendment 1 (ISO 22717:2015/Amd 1:2022) | |
| Cosmetics \x96 Microbiology \x96 Detection of Staphylococcus aureus \x96 Amendment 1 (ISO 22718:2015/Amd 1:2022) | |
| Cosmetics \x96 Microbiology \x96 Enumeration and detection of aerobic mesophilic bacteria \x96 Amendment 1 (ISO 21149:2017/Amd 1:2022) | |
| Cosmetics \x96 Microbiology \x96 Enumeration and detection of aerobic mesophilic bacteria | |
| Cosmetics \x96 Microbiology \x96 General instructions for microbiological examination | |
| Cosmetics \x96 Microbiology \x96 Testing of impregnated or coated wipes and masks (ISO 21322:2020) | |
| Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements | |
| Cryogenic vessels \x96 Cleanliness for cryogenic service (ISO 23208:2017) | |
| Cryogenic vessels \x96 Cleanliness for cryogenic service \x96 Amendment 1 (ISO 23208:2017/Amd 1:2020) | |
| Cryogenic vessels \x96 Toughness requirements for materials at cryogenic temperature \x96 Part 1: Temperatures below -80 \xb0C | |
| Cryogenic vessels \x96 Toughness requirements for materials at cryogenic temperature \x96 Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018) | |
| Dentistry - Graphical symbols for dental instruments | |
| Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file | |
| Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection | |
| Dentistry - Materials used for dental equipment surfaces - Determinaton of resistance to chemical disinfectants | |
| Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file | |
| Dentistry - Periodontal probes - Part 1: General requirements | |
| Dentistry - Periodontal probes - Part 2: Designation | |
| Dentistry - Rotary polishers | |
| Dentistry \x96 Artificial teeth for dental prostheses | |
| Dentistry \x96 Central compressed air source equipment (ISO 22052:2020) | |
| Dentistry \x96 Chairside denture base relining materials \x96 Part 1: Hard type materials (ISO 23401-1:2023) | |
| Dentistry \x96 Elastomeric auxiliaries for use in orthodontics | |
| Dentistry \x96 Hydrocolloid impression materials | |
| Dentistry \x96 Materials for dental instruments \x96 Part 2: Polymers (ISO 21850-2:2025) | |
| Dentistry \x96 Metallic materials for fixed and removable restorations and appliances | |
| Dentistry \x96 Multifunction handpieces (ISO 22569:2020) | |
| Dentistry \x96 Nominal diameters and designation code numbers for rotary instruments | |
| Dentistry \x96 Portable dental equipment for use in non-permanent healthcare environment \x96 Part 1: General requirements (ISO 23402-1:2020) | |
| Dentistry \x96 Portable dental equipment for use in non-permanent healthcare environment \x96 Part 3: Portable suction equipment (ISO 23402-3:2024) | |
| Dentistry \x96 Reusable cartridge syringes intended for intraligamentary injections | |
| Dentistry \x96 Rotational adaptability test between implant body and implant abutment in dental implant systems (ISO 22683:2022) | |
| Dentistry \x96 Spoons and bone curettes (ISO 22570:2020) | |
| Dentistry \x96 Test methods for machining accuracy of computer-aided milling machines (ISO 23298:2023) | |
| Destructive tests on welds in metallic materials \x96 Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) | |
| Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes | |
| Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components | |
| Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2 (ISO 21483:2013) | |
| Electric actuators for industrial valves \x96 General requirements (ISO 22153:2020) | |
| Ellipsometry \x96 Principles (ISO 23131:2021) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part 1: General (ISO 23308-1:2025) | |
| Energy efficiency of industrial trucks \x96 Test methods \x96 Part 2: Operator-controlled self-propelled trucks, burden and personnel carriers and towing tractors (ISO 23308-2:2025) | |
| Environmental solid matrices \x96 Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 22036:2024) | |
| External limb prostheses and external orthoses - Requirements and test methods | |
| Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions | |
| Fasteners - Hexagon weld nuts with flange | |
| Fibre ropes \x96 Determination of certain physical and mechanical properties | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of bulk density of ceramic powders \x96 Part 1: Tap density (ISO 23145-1:2007) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of bulk density of ceramic powders \x96 Part 2: Untapped density | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of densification properties of ceramic powders on natural sintering (ISO 21821:2019) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x96 Determination of hoop tensile properties of tubes (ISO 21971:2019)... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods for chemical analysis of aluminium nitride powders (ISO 21814:2019) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods for chemical analysis of high purity barium titanate powders (ISO 21813:2019) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Reinforcement of ceramic composites \x96 Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Test methods for fracture toughness of monolithic ceramics \x96 Single-edge V-notch beam (SEVNB) method (ISO 23146:2012) | |
| Flares for combustion of biogas (ISO 22580:2020) | |
| Food safety management systems \x96 Requirements for any organization in the food chain \x96 Amendment 1: Climate action changes (ISO 22000:2018/Amd 1:2024) | |
| Food safety management systems \x96 Requirements for any organization in the food chain | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction - Amendment 1 | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods - Amendment 1 | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods | |
| Foodstuffs \x96 Molecular biomarker analysis \x96 Protein-based methods | |
| Foot and leg protectors \x96 Requirements and test methods for footwear component \x96 Part 2: Non-metallic toecaps (ISO 22568-2:2019) | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components \x96 Metallic toecaps (ISO 22568-1:2019) | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components \x96 Part 3: Metallic perforation resistant inserts (ISO 22568-3:2019) | |
| Foot and leg protectors \x96 Requirements and test methods for footwear components \x96 Part 4: Non-metallic perforation resistant inserts (ISO 22568-4:2019) | |
| Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance | |
| Footwear - Test methods for accessories: shoe laces - Abrasion resistance | |
| Footwear - Test methods for accessories: touch and close fasteners - Peel strength before and after repeated closing | |
| Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing | |
| Footwear \x96 Chemical tests \x96 General principles on the preparation of samples (ISO 21061:2021) | |
| Footwear \x96 Test methods for insoles and insocks \x96 Water absorption and desorption | |
| Footwear \x96 Test methods for lining and insocks \x96 Static friction (ISO 22653:2003) | |
| Forensic Sciences \x96 Part 1: Terms and definitions (ISO 21043-1:2018) | |
| Forensic sciences \x96 Part 2: Recognition, recording, collecting, transport and storage of items (ISO 21043-2:2018) | |
| Forensic sciences \x96 Part 3: Analysis (ISO 21043-3:2025) | |
| Forensic sciences \x96 Part 4: Interpretation (ISO 21043-4:2025) | |
| Forensic sciences \x96 Part 5: Reporting (ISO 21043-5:2025) | |
| Forestry and garden machinery \x96 Noise test code for portable hand-held machines with internal combustion engine \x96 Engineering method (Grade 2 accuracy) | |
| Forestry and gardening machinery \x96 Vibration test code for portable hand-held machines with internal combustion engine \x96 Vibration at the handles | |
| Foundry machinery \x96 Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022) | |
| Gas cylinders \x96 Cylinder valves with integrated pressure regulators \x96 Specification and type testing (ISO 22435:2024) | |
| Gas cylinders \x96 Cylinder valves with integrated pressure regulators \x96 Specification and type testing | |
| Gas cylinders \x96 Periodic inspection and testing of welded steel pressure drums \x96 Capacities up to 1 000 l (ISO 23088:2020) | |
| Gas turbine applications \x96 Safety | |
| Genomics informatics \x96 Omics Markup Language (OML) (ISO 21393:2021) | |
| Geometrical product specifications (GPS) - Features utilized in specification and verification | |
| Geometrical product specifications (GPS) \x96 Geometrical tolerancing \x96 General geometrical specifications and general size specifications (ISO 22081:2021) | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 1: Indication of surface texture (ISO 21920-1:2021) | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021) | |
| Geometrical product specifications (GPS) \x96 Surface texture: Profile \x96 Part 3: Specification operators (ISO 21920-3:2021) | |
| Geometrical product specifications (GPS) \x96 Transition specification (ISO 21204:2020) | |
| Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) | |
| Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing | |
| Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 | |
| Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test | |
| Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests | |
| Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems | |
| Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 10: Weight sounding test (ISO 22476-10:2017) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 14: Borehole dynamic probing (ISO 22476-14:2020) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 15: Measuring while drilling (ISO 22476-15:2016) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 16: Borehole shear test (ISO 22476-16:2024) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 1: Electrical cone and piezocone penetration test | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 4: M\xe9nard pressuremeter test | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 5: Flexible dilatometer test | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 6: Self boring pressuremeter test (ISO 22476-6:2018) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 8: Full displacement pressuremeter test (ISO 22476-8:2018) | |
| Geotechnical investigation and testing \x96 Field testing \x96 Part 9: Field vane test (FVT and FVT-F) (ISO 22476 9:2020) | |
| Geotechnical investigation and testing \x96 Geohydraulic testing \x96 Part 4: Pumping tests | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 10: Testing of piles: rapid load testing (ISO 22477-10:2016) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 2: Testing of piles: static tension load testing (ISO 22477-2:2023) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 4: Testing of piles: dynamic load testing (ISO 22477-4:2018) | |
| Geotechnical investigation and testing \x96 Testing of geotechnical structures \x96 Part 5: Testing of grouted anchors (ISO 22477-5:2018) | |
| Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO 21805:2023) | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 1: General requirements (ISO 21904-1:2020) | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020)... | |
| Health and safety in welding and allied processes \x96 Equipment for capture and separation of welding fume \x96 Part 4: Determination of the minimum air volume flow rate of capture... | |
| Health and safety in welding and allied processes \x96 Requirements, testing and marking of equipment for air filtration \x96 Part 3: Determination of the capture efficiency of on-torch welding fume... | |
| Health informatics - Directory services for healthcare providers, subjects of care and other entities | |
| Health Informatics - Harmonized data types for information interchange | |
| Health informatics - Patient healthcard data - Part 1: General structure | |
| Health informatics - Patient healthcard data - Part 2: Common objects | |
| Health informatics - Patient healthcard data - Part 3: Limited clinical data | |
| Health informatics - Patient healthcard data - Part 4: Extended clinical data | |
| Health informatics - Patient healthcard data - Part 6: Administrative data | |
| Health informatics - Patient healthcard data - Part 8: Links | |
| Health informatics - Privilege management and access control - Part 1: Overview and policy management | |
| Health informatics - Privilege management and access control - Part 2: Formal models | |
| Health informatics - Privilege management and access control - Part 3: Implementations | |
| Health informatics \x96 Patient healthcard data \x96 Part 5: Identification data | |
| Health informatics \x96 Patient healthcard data \x96 Part 7: Medication data (ISO 21549-7:2016) | |
| Health Informatics \x96 Reference standards portfolio (RSP) \x96 Clinical imaging (ISO 21860:2020) | |
| High-pressure flexible connections for use with medical gas systems | |
| Hydrogen generators using water electrolysis \x96 Part 1: Safety (ISO 22734-1:2025) | |
| Ice-cream freezers \x96 Classification, requirements and test conditions (ISO 22043:2020) | |
| Industrial valves \x96 Gearbox for valves (ISO 22109:2020) | |
| Industrial valves \x96 Globe valves of thermoplastics materials \x96 Amendment 1 (ISO 21787:2006/Amd 1:2019) | |
| Industrial valves \x96 Globe valves of thermoplastics materials | |
| Infant formula and adult nutritionals \x96 Determination of fructans \x96 High performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) after enzymatic treatment (ISO 22579:2020) | |
| Information container for linked document delivery \x96 Exchange specification \x96 Part 1: Container (ISO 21597-1:2020) | |
| Information container for linked document delivery \x96 Exchange specification \x96 Part 2: Link types (ISO 21597-2:2020) | |
| Intelligent transport systems \x96 Fast service announcement protocol (FSAP) for general purposes in ITS (ISO 22418:2020) | |
| Intelligent transport systems \x96 ITS station security services for secure session establishment and authentication between trusted devices (ISO 21177:2023) | |
| Kite boarding \x96 Release system \x96 Safety requirements and test methods (ISO 21853:2020) | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities | |
| Lasers and laser-related equipment \x96 Test methods for laser-induced damage threshold \x96 Part 1: Definitions and general principles | |
| Leather \x96 Chemical tests \x96 Determination of pesticide residues content (ISO 22517:2019) | |
| Leather \x96 Measuring the colour and colour difference of finished leather (ISO 22700:2019) | |
| Library objects for architecture, engineering, construction and use (ISO 22014:2024) | |
| Light conveyor belts - Determination of electrical resistances | |
| Light conveyor belts - Determination of the coefficient of friction | |
| Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt | |
| Light conveyor belts - Determination of the maximum tensile strength | |
| Light conveyor belts - Determination of the relaxed elastic modulus | |
| Light conveyor belts - Part 1: Principal characteristics and applications | |
| Light conveyor belts \x96 Part 2: List of equivalent terms | |
| Liquid petroleum products \x96 Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel \x96 Multidimensional gas chromatography method (ISO 22854:2025) | |
| Machine tools \x96 Safety \x96 Turning machines | |
| Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents | |
| Medical devices utilizing animal tissues and their derivatives \x96 Part 1: Application of risk management | |
| Medical devices utilizing animal tissues and their derivatives \x96 Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) | |
| Medical gloves - Determination of removable surface powder | |
| Medical laboratories \x96 Application of risk management to medical laboratories (ISO 22367:2020) | |
| Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Shigella spp. | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the determination of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method | |
| Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics | |
| Microbiology of food and animal feeding stuffs - Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions | |
| Microbiology of food and animal feeding stuffs \x96 Horizontal method for the detection of potentially enteropathogenic Vibrio spp. \x96 Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae (ISO 21872-1:2017)... | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Enterobacteriaceae \x96 Part 1: Detection of Enterobacteriaceae (ISO 21528-1:2017) | |
| Microbiology of the food chain \x96 Horizontal method for the detection and enumeration of Enterobacteriaceae \x96 Part 2: Colony-count technique (ISO 21528-2:2017) | |
| Microbiology of the food chain \x96 Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017) | |
| Microbiology of the food chain \x96 Horizontal method for the determination of Vibrio spp. \x96 Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus \x96 Amendment... | |
| Microbiology of the food chain \x96 Methods for the detection of Anisakidae L3 larvae in fish and fishery products \x96 Part 1: UV-press method (ISO 23036-1:2021) | |
| Microbiology of the food chain \x96 Methods for the detection of Anisakidae L3 larvae in fish and fishery products \x96 Part 2: Artificial digestion method (ISO 23036-2:2021) | |
| Microbiology of the food chain \x96 Polymerase chain reaction (PCR) for the detection and quantification of microorganisms \x96 General requirements and definitions (ISO 22174:2024) | |
| Microbiology of the food chain \x96 Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019) | |
| Microbiology of the food chain \x96 Whole genome sequencing for typing and genomic characterization of bacteria \x96 General requirements and guidance (ISO 23418:2022) | |
| Microfluidic devices \x96 Interoperability requirements for dimensions, connections and initial device classification (ISO 22916:2022) | |
| Milk \x96 Quantitative determination of bacteriological quality \x96 Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results | |
| Milk and milk-based drinks - Determination of alkaline phosphatase activity - Enzymatic photo-activated system (EPAS) method | |
| Milk, milk products, infant formula and adult nutritionals \x96 Determination of minerals and trace elements \x96 Inductively coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018) | |
| Molecular biomarker analysis \x96 Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains \x96 General requirements (ISO 22753:2021, Corrected version... | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes in metabolomics in urine, venous blood serum and plasma (ISO 23118:2021) | |
| Nanotechnologies \x96 Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) | |
| Needle-free injectors for medical use \x96 Requirements and test methods | |
| Non-active surgical implants - Joint replacement implants - Particular requirements | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for hip-joint replacement implants (ISO 21535:2023) | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for hip-joint replacement implants \x96 Amendment 1 (ISO 21535:2007/Amd 1:2016) | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for knee-joint replacement implants (ISO 21536:2023) | |
| Non-active surgical implants \x96 Joint replacement implants \x96 Specific requirements for knee-joint replacement implants \x96 Amendment 1 | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic test equipment \x96 Part 1: Instruments (ISO 22232-1:2020) | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic test equipment \x96 Part 2: Probes (ISO 22232-2:2020) | |
| Non-destructive testing \x96 Characterization and verification of ultrasonic test equipment \x96 Part 3: Combined equipment (ISO 22232-3:2020) | |
| Non-destructive testing \x96 Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019) | |
| Non-destructive testing \x96 Ultrasonic testing with arrays \x96 Vocabulary (ISO 23243:2020) | |
| Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels | |
| Non-destructive testing of welds - Penetrant testing - Acceptance levels | |
| Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Testing of welds in austenitic steels and nickel-based alloys | |
| Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method | |
| Non-magnetic metallic coatings on metallic and non-metallic basis materials \x96 Measurement of coating thickness \x96 Phase-sensitive eddy-current method | |
| Nuclear criticality safety \x96 Nuclear criticality safety training for operations (ISO 23133:2021) | |
| Nuclear Energy \x96 Fuel technology \x96 Determination of the O/M ratio in MOX pellets by the gravimetric method (ISO 21484:2017) | |
| Nuclear fuel technology \x96 Sintered (U,Pu)O2 pellets \x96 Guidance for ceramographic preparation for microstructure examination (ISO 22765:2016) | |
| Oilseed meals - Determination of oil content - Rapid extraction method | |
| Oilseeds \x96 Manual or automatic discontinuous sampling (ISO 21294:2017) | |
| Open data communication in building automation, controls and building management \x96 Home and building electronic systems \x96 KNXnet/IP communication (ISO 22510:2019) | |
| Ophthalmic optics \x96 Mounted spectacle lenses | |
| Ophthalmic optics and instruments - Instruments to measure axial distances in the eye | |
| Packaging - Complete, filled transport packages and unit loads - Conditioning for testing | |
| Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests | |
| Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load | |
| Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency | |
| Packaging \x96 Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2024) | |
| Packaging \x96 Tamper verification features for medicinal product packaging (ISO 21976:2018) | |
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance | |
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test | |
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe | |
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion | |
| Paints and varnishes \x96 Determination of settling (ISO 21545:2018) | |
| Paints and varnishes \x96 Determination of solar reflectance (ISO 22969:2019) | |
| Paints and varnishes \x96 Determination of solvents in coating materials containing organic solvents only \x96 Gas-chromatographic method (ISO 23322:2021) | |
| Paints and varnishes \x96 Determination of solvents in water-thinnable coating materials \x96 Gas-chromatographic method (ISO 22518:2019) | |
| Paints and varnishes \x96 Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019) | |
| Paints and varnishes \x96 Determination of water content \x96 Gas-chromatographic method (ISO 23168:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 10: Edge protection (ISO 22553-10:2022) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 11: Bath stability (ISO 22553-11:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 12: Sedimentation on horizontal areas (ISO 22553-12:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 13: Determination of re-solving behaviour (ISO 22553-13:2021) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 14: Deposition behaviour (ISO 22553-14:2021) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 1: Vocabulary (ISO 22553-1:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 2: Throwing power (ISO 22553-2:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 3: Compatibility of electro-deposition coating materials with a reference oil (ISO 22553-3:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 5: Determination of sieve residue (ISO 22553-5:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 6: Entry marks (ISO 22553-6:2019) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 7: Electrical wet-film resistance (ISO 22553-7:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 8: Electric charge density (ISO 22553-8:2020) | |
| Paints and varnishes \x96 Electro-deposition coatings \x96 Part 9: Stoving loss (ISO 22553-9:2020) | |
| Paints and varnishes \x96 Practical determination of non-volatile and volatile matter content during application (ISO 22516:2019) | |
| Paints and varnishes \x96 Scratch test using a spring-loaded pen (ISO 22557:2019) | |
| Paints and varnishes \x96 Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by... | |
| Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction | |
| Parallel pins, of unhardened steel and austenitic stainless steel | |
| Passive neutron dosimetry systems \x96 Part 1: Performance and test requirements for personal dosimetry (ISO 21909-1:2021) | |
| Passive neutron dosimetry systems \x96 Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021) | |
| Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Fusion-bonded epoxy coatings | |
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors | |
| Petroleum and natural gas industries \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) | |
| Petroleum and natural gas industries \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 3: Field joint coatings \x96 Amendment 1: Introduction of mesh-backed... | |
| Petroleum and natural gas industries \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 3: Field joint coatings | |
| Petroleum and natural gas industries \x96 External coatings for buried or submerged pipelines used in pipeline transportation systems \x96 Part 5: External concrete coatings | |
| Petroleum products - Corrosiveness to copper - Copper strip test | |
| Petroleum products \x96 Determination of cloud point \x96 Automated step-wise cooling method (ISO 22995:2019) | |
| Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems | |
| Petroleum, petrochemical and natural gas industries \x96 Pressure-relieving and depressuring systems (ISO 23251:2019) | |
| Petroleum, petrochemical and natural gas industries \x96 Prevention of corrosion on pipeline systems influenced by stray currents (ISO 21857:2021) | |
| Pigments and extenders \x96 Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics (ISO 21683:2019) | |
| Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation | |
| Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges | |
| Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value | |
| Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance | |
| Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method | |
| Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method | |
| Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method | |
| Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method | |
| Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method | |
| Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method | |
| Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method | |
| Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulati on technique | |
| Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine | |
| Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine | |
| Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine | |
| Plastics \x96 Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions \x96 Test methods and requirements (ISO 22403:2020) | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 1: General principles (ISO 22526-1:2020) | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)... | |
| Plastics \x96 Carbon and environmental footprint of biobased plastics \x96 Part 3: Process carbon footprint, requirements and guidelines for quantification (ISO 22526-3:2020) | |
| Plastics \x96 Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment \x96 Method by analysis of evolved carbon dioxide (ISO 22404:2019) | |
| Plastics \x96 Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions (ISO 22766:2020) | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 1: General principles | |
| Plastics \x96 Determination of thermal conductivity and thermal diffusivity \x96 Part 4: Light flash method (ISO 22007-4:2024) | |
| Plastics \x96 Ethylene-vinyl acetate (EVAC) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21301-1:2019) | |
| Plastics \x96 Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21309-1:2019) | |
| Plastics \x96 Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019) | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21302-1:2019) | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019) | |
| Plastics \x96 Polybutene-1 (PB-1) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21302-2:2019) | |
| Plastics \x96 Polycarbonate (PC) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21305-1:2019) | |
| Plastics \x96 Polycarbonate (PC) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019) | |
| Plastics \x96 Polyetheretherketone (PEEK) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 23153-1:2020) | |
| Plastics \x96 Polyetheretherketone (PEEK) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020) | |
| Plastics \x96 Polyketone (PK) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21970-1:2018) | |
| Plastics \x96 Polyketone (PK) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2018) | |
| Plastics \x96 Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21304-1:2019) | |
| Plastics \x96 Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021) | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 21306-1:2019) | |
| Plastics \x96 Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 21306-2:2019) | |
| Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006) | |
| Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General | |
| Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations \x96 Polyethylene of raised temperature resistance (PE-RT) \x96 Part 2: Pipes \x96 Amendment 1 (ISO 22391-2:2009/Amd 1:2020) | |
| Plastics piping systems for hot and cold water installations \x96 Polyethylene of raised temperature resistance (PE-RT) \x96 Part 3: Fittings \x96 Amendment 1 (ISO 22391-3:2009/Amd 1:2020) | |
| Plastics piping systems for hot and cold water installations \x96 Polyethylene of raised temperature resistance (PE-RT) \x96 Part 3: Fittings \x96 Amendment 2 (ISO 22391-3:2009/Amd 2:2021) | |
| Plastics piping systems for hot and cold water installations \x96 Polyethylene of raised temperature resistance (PE-RT) \x96 Part 5: Fitness for purpose of the system \x96 Amendment 1 (ISO 22391-5:2009/Amd... | |
| Point-of-care testing (POCT) \x96 Requirements for quality and competence (ISO 22870:2016) | |
| Prevailing torque type steel nuts - Mechanical and performance properties | |
| Prosthetics \x96 Testing of ankle-foot devices and foot units \x96 Requirements and test methods (ISO 22675:2024) | |
| Protective gloves \x96 General requirements and test methods (ISO 21420:2020) | |
| Protective gloves \x96 General requirements and test methods \x96 Amendment 1 (ISO 21420:2020/Amd 1:2022) | |
| Pumps - Shaft sealing systems for centrifugal and rotary pumps | |
| Railway applications \x96 Railway quality management system \x96 ISO 9001:2015 and specific requirements for application in the railway sector | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 1: Vocabulary (ISO 22074-1:2020) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 2: Test method for longitudinal rail restraint (ISO 22074-2:2021) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 3: Proof load test method for pull-out resistance (ISO 22074-3:2021) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 4: Test methods for resistance to repeated loading (ISO 22074-4:2022) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 5: Test method for electrical resistance (ISO 22074-5:2021) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 6: Test method for resistance to severe environmental conditions (ISO 22074-6:2021) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 7: Test method for clamping force and uplift stiffness (ISO 22074-7:2021) | |
| Railway infrastructure \x96 Rail fastening systems \x96 Part 8: Test method for vertical stiffness (ISO 22074-8:2022) | |
| Recreational diving services \x96 Requirements and guidance on environmentally sustainable practices in recreational diving (ISO 21416:2019) | |
| Recreational diving services \x96 Requirements for training on environmental awareness for recreational divers (ISO 21417:2019) | |
| Refrigerated storage cabinets and counters for professional use \x96 Performance and energy consumption (ISO 22041:2019) | |
| Refrigerating systems and heat pumps \x96 Competence of personnel | |
| Refrigerating systems and heat pumps \x96 Valves \x96 Requirements, testing and marking (ISO 21922:2021) | |
| Resistance welding - Transformer-rectifie r for welding guns with integrated transformers - Transformer-rectifie r units operating at 1000 Hz frequency | |
| Road vehicles \x96 Dimethyl Ether (DME) refuelling connector (ISO 21058:2019) | |
| Rubber or plastic coated fabrics \x96 Physical and mechanical test \x96 Determination of bending force (ISO 22751:2020) | |
| Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing | |
| Rubber- or plastics-coated fabrics \x96 Determination of roll characteristics \x96 Part 1: Methods for determination of length, width and net mass | |
| Rubber- or plastics-coated fabrics \x96 Determination of roll characteristics \x96 Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per... | |
| Rubber- or plastics-coated fabrics \x96 Determination of roll characteristics \x96 Part 3: Method for determination of thickness | |
| Safety of machinery - Lubricants with incidental product contact - Hygiene requirements | |
| Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022) | |
| Security and resilience \x96 Business continuity management systems \x96 Requirements \x96 Amendment 1: Climate action changes (ISO 22301:2019/Amd 1:2024) | |
| Security and resilience \x96 Crisis management \x96 Guidelines (ISO 22361:2022) | |
| Ship and marine technology \x96 Technical requirements for dry-disconnect/conne ct couplings for bunkering liquefied natural gas (ISO 21593:2019) | |
| Sintered-metal injection-moulded materials - Specifications | |
| Small craft \x96 Permanently installed petrol and diesel fuel tanks \x96 Amendment 1 | |
| Small craft \x96 Permanently installed petrol and diesel fuel tanks \x96 Amendment 2 | |
| Small craft \x96 Permanently installed petrol and diesel fuel tanks | |
| Societal security - Business continuity management systems - Guidance | |
| Societal security - Video-surveillance - Export interoperability | |
| Societal security \x96 Business continuity management systems \x96 Requirements | |
| Societal security \x96 Guidelines for establishing partnering arrangements (ISO 22397:2014) | |
| Societal security \x96 Mass evacuation \x96 Guidelines for planning (ISO 22315:2014) | |
| Societal security \x96 Terminology | |
| Soil quality - Biological methods - Chronic toxicity in higher plants | |
| Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method | |
| Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry | |
| Soil quality \x96 Conceptual site models for potentially contaminated sites (ISO 21365:2019) | |
| Soil quality \x96 Determination of selected organotin compounds \x96 Gas-chromatographic method | |
| Soil quality \x96 Determination of the effects of pollutants on soil flora \x96 Leaf fatty acid composition of plants to assess soil quality (ISO 21479:2019) | |
| Soil quality \x96 Identification of ecotoxicological test species by DNA barcoding (ISO 21286:2019) | |
| Soil quality \x96 Inhibition of reproduction of the soil mite (Hypoaspis aculeifer) by soil contaminants (ISO 21285:2019) | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like material \x96 Part 2: Batch test using a liquid to solid ratio of 10 l/kg... | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 1: Batch test using a liquid to solid ratio of 2 l/kg... | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 3: Up-flow percolation test (ISO 21268-3:2019) | |
| Soil quality \x96 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x96 Part 4: Influence of pH on leaching with initial acid/base addition (ISO 21268-4:2019)... | |
| Soil quality \x96 Test for measuring the inhibition of reproduction in oribatid mites (Oppia nitens) exposed to contaminants in soil (ISO 23266:2020) | |
| Solar energy - Collector components and materials - Part 3: Absorber surface durability | |
| Solar energy \x96 Collector components and materials \x96 Part 1: Evacuated tubes \x96 Durability and performance (ISO 22975-1:2016) | |
| Solar energy \x96 Collector components and materials \x96 Part 2: Heat-pipes for solar thermal application \x96 Durability and performance (ISO 22975-2:2016) | |
| Solid biofuels \x96 Determination of ash melting behaviour (ISO 21404:2020) | |
| Solid biofuels \x96 Determination of water sorption and its effect on durability of thermally treated biomass fuels \x96 Part 1: Pellets (ISO 23343-1:2021) | |
| Solid biofuels \x96 Simplified sampling method for small scale applications (ISO 21945:2020) | |
| Solid recovered fuels \x96 Determination of ash content (ISO 21656:2021) | |
| Solid recovered fuels \x96 Determination of calorific value (ISO 21654:2021) | |
| Solid recovered fuels \x96 Determination of content of volatile matter (ISO 22167:2021) | |
| Solid recovered fuels \x96 Determination of moisture content using the oven dry method \x96 Part 3: Moisture in general analysis sample (ISO 21660-3:2021) | |
| Solid recovered fuels \x96 Determination of self-heating \x96 Part 1: Isothermal calorimetry | |
| Solid recovered fuels \x96 Methods for sampling (ISO 21645:2021) | |
| Solid recovered fuels \x96 Methods for the determination of biomass content (ISO 21644:2021) | |
| Solid recovered fuels \x96 Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020) | |
| Solid recovered fuels \x96 Safe handling and storage of solid recovered fuels (ISO 21912:2021) | |
| Solid recovered fuels \x96 Sample preparation (ISO 21646:2022) | |
| Solid recovered fuels \x96 Specifications and classes (ISO 21640:2021) | |
| Solid recovered fuels \x96 Vocabulary | |
| Solvents for paints and varnishes \x96 Demineralized water for industrial applications \x96 Specification and test methods (ISO 23321:2019) | |
| Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020) | |
| Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors | |
| Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method | |
| Stationary source emissions \x96 Determination of the mass concentration of ammonia \x96 Manual method (ISO 21877:2019) | |
| Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration | |
| Sustainability in buildings and civil engineering works \x96 Data templates for the use of environmental product declarations (EPDs) for construction products in building information modelling (BIM) (ISO 22057:2022) | |
| Technical drawings - Conventional representation of gears | |
| Technical product documentation - Springs - Part 1: Simplified representation | |
| Technical product documentation - Springs - Part 2: Data sheets for cylindrical helical compression springs | |
| Test method to measure the efficiency of air filtration media against spherical nanomaterials \x96 Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018) | |
| Textiles \x96 Determination of fabric deformability by forced mechanical distension (ISO 21765:2020) | |
| Textiles \x96 Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass... | |
| Textiles \x96 Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery \x96 Part 1: Method of the horizontally folded specimen (ISO... | |
| Textiles \x96 Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery \x96 Part 2: Method of the vertically folded specimen (ISO... | |
| Textiles \x96 Method for determination of alkylphenols (AP) (ISO 21084:2019) | |
| Textiles and textile products \x96 Determination of organotin compounds \x96 Part 1: Derivatisation method using gas chromatography (ISO 22744-1:2020) | |
| Textiles and textile products \x96 Determination of organotin compounds \x96 Part 2: Direct method using liquid chromatography (ISO 22744-2:2020) | |
| Thermal insulation for buildings \x96 Reflective insulation products \x96 Determination of thermal performance (ISO 22097:2023) | |
| Traceability in the feed and food chain - General principles and basic requirements for system design and implementation | |
| Transfer sets for pharmaceutical preparations \x96 Requirements and test methods | |
| Transportable gas cylinders \x96 Inspection and maintenance of cylinder valves | |
| Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection | |
| Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry | |
| Water quality - Evaluation of genotoxicity by measurement of the induction of micronuclei - Part 2: Mixed population method using the cell line V79 | |
| Water quality \x96 Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water \x96 Method using high performance... | |
| Water quality \x96 Guidance for rapid radioactivity measurements in nuclear or radiological emergency situation (ISO 22017:2020) | |
| Water quality \x96 Iron-55 \x96 Test method using liquid scintillation counting (ISO 22515:2021) | |
| Water quality \x96 Multi-compound class methods \x96 Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO 21253-1:2019) | |
| Water quality \x96 Multi-compound class methods \x96 Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019) | |
| Water quality \x96 Radium 226 and Radium 228 \x96 Test method using liquid scintillation counting (ISO 22908:2020) | |
| Water quality \x96 Technetium-99 \x96 Part 1: Test method using liquid scintillation counting (ISO 22125-1:2019) | |
| Water quality \x96 Technetium-99 \x96 Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO 22125-2:2019) | |
| Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel - Classification | |
| Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method | |
| Wheat and wheat flour - Gluten content - Part 2: Determination of wet gluten and gluten index by mechanical means (ISO 21415-2:2015) | |
| Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying method | |
| Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method | |
| Workplace air \x96 Gases and vapours \x96 Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022) | |
| Workplace air \x96 Gases and vapours \x96 Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2019) | |
| Workplace air \x96 Metals and metalloids in airborne particles \x96 Requirements for evaluation of measuring procedures (ISO 21832:2018) | |
| Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction |
| << Prev | Next >> |