Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
350
400
450
500
550
600
620
630
640
650
660
670
678
679
680
681
682
683
684
685
686
687
688
689
690
700
710
720
730
740
750
800
850
900
950
1000
1050
1500
1620
| Product Name | Notes |
|---|---|
| 3-D scanning methodologies for internationally compatible anthropometric databases \x96 Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans (ISO 20685-1:2018) | |
| 3-D scanning methodologies for internationally compatible anthropometric databases | |
| Acoustics \x96 Characterization of sources of structure-borne sound and vibration \x96 Indirect measurement of blocked forces (ISO 20270:2019) | |
| Addressing \x96 Part 4: International postal address components and template language (ISO 19160-4:2017) | |
| Aerosol drug delivery device design verification - Requirements and test methods | |
| Air quality - Guidelines for estimating measurement uncertainty | |
| Anaesthetic and respiratory equipment \x96 Passive humidifiers (ISO 20789:2018) | |
| Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils | |
| Anodizing of aluminium and its alloys \x96 Check for continuity of thin anodic oxidation coatings \x96 Copper sulfate test | |
| Assistive products for tissue integrity when lying down \x96 Part 1: General Requirements (ISO 20342-1:2019) | |
| Assistive products for tissue integrity when lying down \x96 Part 5: Test method for resistance to cleaning and disinfection (ISO 20342-5:2024) | |
| Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis | |
| Biogas \x96 Biogas production, conditioning, upgrading and utilization \x96 Terms, definitions and classification scheme (ISO 20675:2018) | |
| Biotechnology \x96 Biobanking \x96 General requirements for biobanking (ISO 20387:2018) | |
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements | |
| Building construction machinery and equipment \x96 Portable, hand-held, internal combustion engine-driven abrasive cutting machines \x96 Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020) | |
| Cellular plastics and rubbers - Determination of linear dimensions | |
| Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method | |
| Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica | |
| Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis | |
| Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission... | |
| Clinical laboratory testing and in vitro diagnostic test systems \x96 Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices \x96 Part 1: Reference method for... | |
| Clinical laboratory testing and in vitro diagnostic test systems \x96 Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices \x96 Part 2: Evaluation of performance... | |
| Coffee and coffee products \x96 Determination of acrylamide \x96 Methods using HPLC-MS/MS and GC-MS after derivatization (ISO 18862:2016) | |
| Conveyor belts \x96 Drum friction testing (ISO 20238:2018) | |
| Corrosion of metal and alloys \x96 Determination of resistance of magnesium alloys to stress corrosion cracking (ISO 20728:2018) | |
| Cosmetics \x96 Sun protection test methods \x96 Percentage of water resistance (ISO 18861:2020) | |
| Cryogenic vessels \x96 Hoses (ISO 21012:2024) | |
| Cryogenic vessels \x96 Large transportable vacuum-insulated vessels \x96 Part 2: Operational requirements (ISO 20421-2:2017) | |
| Cryogenic vessels \x96 Pressure-relief accessories for cryogenic service \x96 Part 3: Sizing and capacity determination | |
| Cryogenic vessels \x96 Static vacuum insulated vessels \x96 Part 2: Operational requirements | |
| Dentistry - Base polymers - Part 1: Denture base polymers | |
| Dentistry - Base polymers - Part 2: Orthodontic base polymers | |
| Dentistry - Vocabulary | |
| Dentistry \x96 Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018) | |
| Dentistry \x96 Designation system for dental implants (ISO 19429:2015) | |
| Dentistry \x96 Digital impression devices \x96 Part 1: Methods for assessing accuracy (ISO 20896-1:2019) | |
| Dentistry \x96 Filling instrument with contra angle (ISO 19715:2017) | |
| Dentistry \x96 Manual toothbrushes \x96 General requirements and test methods \x96 Amendment 1 (ISO 20126:2012/Amd 1:2018) | |
| Dentistry \x96 Manual toothbrushes \x96 General requirements and test methods | |
| Dentistry \x96 Oral surgical scalpel handle (ISO 20570:2018) | |
| Dentistry \x96 Orthodontic anchor screws (ISO 19023:2018) | |
| Dentistry \x96 Powder jet handpieces and powders (ISO 20608:2018) | |
| Dentistry \x96 Powered toothbrushes \x96 General requirements and test methods | |
| Dentistry \x96 Pre-capsulated dental amalgam (ISO 20749:2017) | |
| Dentistry \x96 Sinus membrane elevator (ISO 19490:2017) | |
| Dentistry \x96 Trephine burs (ISO 20569:2018) | |
| Dentistry \x96 Vocabulary and designation system for forensic oro-dental data (ISO 20888:2020) | |
| Determination of the resistance to cryogenic spill of insulation materials \x96 Part 2: Vapour exposure (ISO 20088-2:2020) | |
| Determination of the resistance to cryogenic spillage of insulation materials \x96 Part 1: Liquid phases (ISO 20088-1:2016) | |
| Determination of the resistance to cryogenic spillage of insulation materials \x96 Part 3: Jet release | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 1: Conceptual basis for measurements (ISO 20785-1:2012) | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 2: Characterization of instrument response (ISO 20785-2:2011) | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 3: Measurements at aviation altitudes (ISO 20785-3:2023) | |
| Dosimetry for exposures to cosmic radiation in civilian aircraft \x96 Part 4: Validation of codes (ISO 20785-4:2019) | |
| E-liquid \x96 Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices \x96 Gas chromatographic method (ISO 20714:2019) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 1: Methodology to determine safety-related parts of the control system and performance requirements (ISO 19014-1:2018) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO 19014-2:2022) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system (ISO 19014-3:2018) | |
| Earth-moving machinery \x96 Functional safety \x96 Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO 19014-4:2020) | |
| Electrically propelled road vehicles \x96 Magnetic field wireless power transfer \x96 Safety and interoperability requirements (ISO 19363:2020) | |
| Electronic fee collection \x96 Security framework (ISO 19299:2020) | |
| Enteral feeding systems \x96 Design and testing (ISO 20695:2020) | |
| Enterprise integration - Constructs for enterprise modelling | |
| Enterprise integration - Framework for enterprise modelling | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 1: Safety and environmental requirements | |
| Equipment for crop protection \x96 Knapsack sprayers \x96 Part 2: Test methods | |
| Ergonomics \x96 3-D scanning methodologies for internationally compatible anthropometric databases \x96 Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO 20685-2:2015) | |
| Eye and face protection \x96 Guidance on selection, use and maintenance (ISO 19734:2021) | |
| Eye and face protection \x96 Protection against laser radiation \x96 Part 1: Requirements and test methods (ISO 19818-1:2021) | |
| Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings | |
| Fasteners \x96 Terminology \x96 Part 2: Vocabulary and definitions for coatings \x96 Amendment 1 (ISO 1891-2:2014/Amd 1:2020) | |
| Fasteners \x96 Vocabulary \x96 Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018) | |
| Fibre ropes - Polyethylene - 3- and 4-strand ropes | |
| Fibre ropes and cordage - Vocabulary | |
| Fibre-reinforced plastic composites \x96 Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Ceramic composites \x96 Notations and symbols (ISO 19634:2017) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Determination of oxidation resistance of non-oxide monolithic ceramics (ISO 20509:2003) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure \x96 Determination of tensile properties of tubes (ISO 20323:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Mechanical properties of ceramic composites at room temperature \x96 Determination of the interlaminar shear strength and shear modulus of continuous-fibre-rei nforced composites... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Methods of test for reinforcements \x96 Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Thermophysical properties of ceramic composites \x96 Determination of specific heat capacity (ISO 19628:2017) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Thermophysical properties of ceramic composites \x96 Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x96 Weibull statistics for strength data (ISO 20501:2019) | |
| Footwear - Test methods for heels - Fatigue resistance | |
| Footwear - Test methods for heels - Resistance to lateral impact | |
| Footwear - Test methods for heels and top pieces - Top piece retention strength | |
| Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content | |
| Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics | |
| Footwear - Test methods for whole shoe - Thermal insulation | |
| Footwear - Test methods for whole shoe - Washability in a domestic washing machine | |
| Footwear - Vocabulary | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of certain organic solvents (ISO 20686:2025) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of Nitrosamines (ISO 19577:2019) | |
| Footwear \x96 Critical substances potentially present in footwear and footwear components \x96 Determination of phenol in footwear materials (ISO 20536:2017) | |
| Footwear \x96 Identification of defects during visual inspection \x96 Vocabulary (ISO 20537:2025) | |
| Footwear \x96 Test method for stiffeners and toepuffs \x96 Bondability | |
| Footwear \x96 Test methods for heels \x96 Heel pin holding strength | |
| Footwear \x96 Test methods for shanks \x96 Fatigue resistance (ISO 18895:2006) | |
| Footwear and footwear components \x96 Qualitative test method to assess antifungal activity (growth test) (ISO 19574:2022) | |
| Footwear and footwear components \x96 Quantitative challenge test method to assess antifungal activity (ISO 20150:2019) | |
| Footwear sizing \x96 Inshoe measurement \x96 Part 1: Shoe length (ISO 19410-1:2022) | |
| Gas cylinders - Identification and marking using radio frequency identification technology - Part 1: Reference architecture and terminology (ISO 21007-1:2005) | |
| Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification | |
| Gas cylinders \x96 Cylinder bundles \x96 Periodic inspection and testing (ISO 20475:2018) | |
| Geographic information - Classification systems - Part 1: Classification system structure | |
| Geographic information - Conformance and testing | |
| Geographic information - Core profile of the spatial schema | |
| Geographic information - Cross-domain vocabularies | |
| Geographic information - Encoding | |
| Geographic information - Filter encoding | |
| Geographic information - Geography Markup Language (GML) | |
| Geographic information - Location-based services - Multimodal routing and navigation | |
| Geographic information - Location-based services - Reference model | |
| Geographic information - Location-based services - Tracking and navigation | |
| Geographic information - Portrayal | |
| Geographic information - Procedures for item registration - Part 1: Fundamentals | |
| Geographic information - Profiles | |
| Geographic information - Quality evaluation procedures | |
| Geographic information - Reference model - Part 1: Fundamentals | |
| Geographic information - Schema for moving features | |
| Geographic information - Services | |
| Geographic information - Simple feature access - Part 1: Common architecture | |
| Geographic information - Simple feature access - Part 2: SQL option | |
| Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values | |
| Geographic information - Spatial referencing by coordinates | |
| Geographic information - Spatial referencing by geographic identifiers | |
| Geographic information - Temporal schema | |
| Geographic information - Web Feature Service | |
| Geographic information - Web map server interface | |
| Geographic information \x96 Classification systems \x96 Part 2: Land Cover Meta Language (LCML) (ISO 19144-2:2023) | |
| Geographic information \x96 Data product specifications \x96 Amendment 1: Requirements relating to the inclusion of an application schema and feature catalogue and the treatment of coverages in an application schema... | |
| Geographic information \x96 Data product specifications | |
| Geographic information \x96 Data quality \x96 Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018) | |
| Geographic information \x96 Data quality \x96 Part 1: General requirements (ISO 19157-1:2023) | |
| Geographic information \x96 Data quality | |
| Geographic information \x96 Feature concept dictionaries and registers | |
| Geographic information \x96 Geography Markup Language (GML) \x96 Part 1: Fundamentals (ISO 19136-1:2020) | |
| Geographic information \x96 Geography Markup Language (GML) \x96 Part 2: Extended schemas and encoding rules (ISO 19136-2:2015) | |
| Geographic information \x96 Geospatial API for features \x96 Part 1: Core (ISO 19168-1:2020) | |
| Geographic information \x96 Geospatial API for features \x96 Part 2: Coordinate Reference Systems by Reference (ISO 19168-2:2022) | |
| Geographic information \x96 Indoor feature model (ISO 19164:2024) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 1: Generic conceptual model (ISO 19152-1:2024) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 2: Land registration (ISO 19152-2:2025) | |
| Geographic information \x96 Land Administration Domain Model (LADM) \x96 Part 3: Marine georegulation (ISO 19152-3:2024) | |
| Geographic information \x96 Land Administration Domain Model (LADM) | |
| Geographic information \x96 Linear referencing | |
| Geographic information \x96 Metadata \x96 Part 1: Fundamentals \x96 Amendment 1 (ISO 19115-1:2014/Amd 1:2018) | |
| Geographic information \x96 Metadata \x96 Part 1: Fundamentals \x96 Amendment 2 (ISO 19115-1:2014/Amd 2:2020) | |
| Geographic information \x96 Metadata \x96 Part 1: Fundamentals | |
| Geographic information \x96 Metadata \x96 Part 2: Extensions for acquisition and processing \x96 Amendment 1 (ISO 19115-2:2019/Amd 1:2022) | |
| Geographic information \x96 Metadata \x96 Part 2: Extensions for imagery and gridded data | |
| Geographic information \x96 Metadata \x96 Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023) | |
| Geographic information \x96 Methodology for feature cataloguing (ISO 19110:2016) | |
| Geographic information \x96 Observations and measurements | |
| Geographic information \x96 Ontology \x96 Part 6: Service ontology register (ISO 19150-6:2023) | |
| Geographic information \x96 Positioning services \x96 Amendment 1 (ISO 19116:2019/Amd 1:2021) | |
| Geographic information \x96 Positioning services | |
| Geographic information \x96 Procedures for item registration \x96 Part 1: Fundamentals \x96 Amendment 1 (ISO 19135-1:2015/Amd 1:2021) | |
| Geographic information \x96 Referencing by coordinates \x96 Amendment 1 (ISO 19111:2019/Amd 1:2021) | |
| Geographic information \x96 Referencing by coordinates \x96 Amendment 2 (ISO 19111:2019/Amd 2:2023) | |
| Geographic information \x96 Rules for application schema | |
| Geographic information \x96 Schema for coverage geometry and functions \x96 Part 1: Fundamentals (ISO 19123-1:2023) | |
| Geographic information \x96 Schema for coverage geometry and functions \x96 Part 3: Processing fundamentals (ISO 19123-3:2023) | |
| Geographic information \x96 Schema for coverage geometry and functions | |
| Geographic information \x96 Spatial schema | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size | |
| Geometrical product specifications (GPS) \x96 Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) | |
| Geometrical product specifications (GPS) \x96 Dimensional measuring equipment \x96 Part 2: Reference disk gauges (ISO 1938-2:2017) | |
| Guidance for gamma spectrometry measurement of radioactive waste (ISO 19017:2015) | |
| Guidelines for auditing management systems | |
| Guidelines for management consultancy services (ISO 20700:2017) | |
| High visibility clothing \x96 Test methods and requirements \x96 Amendment 1 (ISO 20471:2013/Amd 1:2016) | |
| High visibility clothing \x96 Test methods and requirements | |
| In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology | |
| In vitro diagnostic medical devices \x96 Clinical performance studies using specimens from human subjects \x96 Good study practice (ISO 20916:2019) | |
| Infant formula and adult nutritionals -Determination of total iodine \x96 Inductively coupled plasma mass spectrometry (ICP-MS) (ISO 20647:2015) | |
| Installation and equipment for liquefied natural gas \x96 Design of floating LNG installations \x96 Part 1: General requirements (ISO 20257-1:2020) | |
| Installation and equipment for liquefied natural gas \x96 Design of floating LNG installations \x96 Part 2: Specific FSRU issues (ISO 20257-2:2021) | |
| Intelligent transport systems \x96 Geographic Data Files (GDF) GDF5.1 \x96 Part 1: Application independent map data shared between multiple sources (ISO 20524-1:2020) | |
| Intelligent transport systems \x96 Geographic Data Files (GDF) GDF5.1 \x96 Part 2: Map data used in automated driving systems, Cooperative ITS, and multi-modal transport (ISO 20524-2:2020) | |
| Leather - Chemical determination of N-methyl-2-pyrrolido ne (NMP) in leather | |
| Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents | |
| Leather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) | |
| Leather \x96 Chemical tests \x96 Guidelines for testing critical chemicals in leather (ISO 20137:2017) | |
| Leather \x96 Determination of degradability by micro-organisms (ISO 20136:2017) | |
| Leather \x96 Measurement of leather surface \x96 Electronic techniques (ISO 19076:2023) | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to crocking | |
| Leather \x96 Tests for colour fastness \x96 Colour fastness to saliva (ISO 20701:2024) | |
| Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy | |
| Liquid pumps and pumps units \x96 Noise test code \x96 Grades 2 and 3 of accuracy (ISO 20361:2019) | |
| Lung ventilators and related equipment \x96 Vocabulary and semantics (ISO 19223:2019) | |
| Machinery for forestry \x96 Winches \x96 Part 2: Traction aid winches (ISO 19472-2:2022) | |
| Measurement of fluid flow in closed conduits \x96 Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017) | |
| Measurement of radioactivity \x96 Determination of beta emitters activities \x96 Test method using liquid scintillation counting (ISO 19361:2017) | |
| Measurement of radioactivity \x96 Gamma emitting radionuclides \x96 Rapid screening method using scintillation detector gamma-ray spectrometry (ISO 19581:2017) | |
| Measurement of radioactivity \x96 Gamma-ray emitting radionuclides \x96 Generic test method using gamma-ray spectrometry (ISO 20042:2019) | |
| Measurement of radioactivity in the environment \x96 Air: aerosol particles \x96 Test method using sampling by filter media (ISO 20044:2022) | |
| Measurement of the radioactivity in the environment \x96 Air: tritium \x96 Test method using bubbler sampling (ISO 20045:2023, including corrected version 2023-09) | |
| Mechanical vibration \x96 Hand-held and hand-guided machinery \x96 Principles for evaluation of vibration emission \x96 Amendment 1: Accelerometer positions | |
| Mechanical vibration \x96 Hand-held and hand-guided machinery \x96 Principles for evaluation of vibration emission | |
| Medical devices \x96 Information to be supplied by the manufacturer (ISO 20417:2021) | |
| Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness | |
| Metallic and other inorganic coatings \x96 Electroplated coatings of cadmium with supplementary treatments on iron or steel | |
| Metallic and other inorganic coatings \x96 Electroplated coatings of zinc with supplementary treatments on iron or steel | |
| Metallic and other inorganic coatings \x96 Surface treatment, metallic and other inorganic coatings \x96 Vocabulary | |
| Metallic coatings \x96 Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) | |
| Metallic materials - Sheet and strip - Erichsen cupping test | |
| Metallic materials \x96 Uniaxial creep testing in tension \x96 Method of test | |
| Metallic tube connections for fluid power and general use \x96 Test methods for hydraulic fluid power connections | |
| Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for amplification and detection for qualitative methods | |
| Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for sample preparation for qualitative detection | |
| Microbiology of the food chain \x96 Detection and quantification of histamine in fish and fishery products \x96 HPLC method (ISO 19343:2017) | |
| Microbiology of the food chain \x96 Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019) | |
| Microbiology of the food chain \x96 Polymerase chain reaction (PCR) for the detection of microorganisms \x96 Thermal performance testing of thermal cyclers (ISO 20836:2021) | |
| Microbiology of the food chain \x96 Requirements and guidelines for conducting challenge tests of food and feed products \x96 Part 1: Challenge tests to study growth potential, lag time and... | |
| Microbiology of the food chain \x96 Requirements and guidelines for conducting challenge tests of food and feed products \x96 Part 2: Challenge tests to study inactivation potential and kinetic parameters... | |
| Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction | |
| Mining \x96 Mobile machines working underground \x96 Machine safety (ISO 19296:2018) | |
| Molecular biomarker analysis \x96 Methods of analysis for the detection and identification of animal species in foods and food products (nucleic acid-based methods) \x96 General requirements and definitions (ISO 20813:2019)... | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 1: Isolated RNA (ISO 20166-1:2018) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 3: Isolated DNA (ISO 20166-3:2018) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for frozen tissue \x96 Part 1: Isolated RNA (ISO 20184-1:2018) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for frozen tissue \x96 Part 2: Isolated proteins (ISO 20184-2:2018) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for frozen tissue \x96 Part 3: Isolated DNA (ISO 20184-3:2021) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 1: Isolated cellular RNA (ISO 20186-1:2019) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 2: Isolated cellular RNA (ISO 20186-2:2019) | |
| Molecular in vitro diagnostic examinations \x96 Specifications for preexamination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x96 Part 4: In situ detection techniques (ISO 20166-4:2021) | |
| Molecular in-vitro diagnostic examinations \x96 Specifications for pre-examination processes for venous whole blood \x96 Part 3: Isolated circulating cell free DNA from plasma (ISO 20186-3:2019) | |
| Monolithic (unshaped) refractory products - Part 1: Introduction and classification | |
| Monolithic (unshaped) refractory products - Part 2: Sampling for testing | |
| Monolithic (unshaped) refractory products - Part 3: Characterization as received | |
| Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables | |
| Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces | |
| Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties | |
| Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes | |
| Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties | |
| Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General | |
| Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes | |
| Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings | |
| Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system | |
| Multilayer piping systems for hot and cold water installations inside buildings \x96 Part 3: Fittings \x96 Amendment 1 (ISO 21003-3:2008/Amd 1:2021) | |
| Nanotechnologies \x96 Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity (ISO 19337:2023) | |
| Nanotechnologies \x96 Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) | |
| Natural gas - Determination of sulfur compounds using gas chromatography | |
| Natural gas \x96 Calculation of thermodynamic properties \x96 Part 1: Gas phase properties for transmission and distribution applications (ISO 20765-1:2005) | |
| Natural gas \x96 Calculation of thermodynamic properties \x96 Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015) | |
| Natural gas \x96 Calculation of thermodynamic properties \x96 Part 5: Calculation of viscosity, Joule-Thomson coefficient, and isentropic exponent (ISO 20765-5:2022) | |
| Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators | |
| Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators | |
| Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables | |
| Non-destructive testing \x96 Equipment for eddy current examination \x96 Array probe characteristics and verification (ISO 20339:2017) | |
| Non-destructive testing \x96 Image quality of radiographs \x96 Part 3: Image quality classes | |
| Non-destructive testing \x96 Image quality of radiographs \x96 Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators | |
| Non-destructive testing \x96 Leak testing \x96 Calibration of reference leaks for gases (ISO 20486:2017) | |
| Non-destructive testing \x96 Leak testing \x96 Tracer gas method (ISO 20485:2017) | |
| Non-destructive testing \x96 Leak testing \x96 Vocabulary (ISO 20484:2017) | |
| Non-destructive testing \x96 Radiographic inspection of corrosion and deposits in pipes by X \x96 and gamma rays \x96 Part 1: Tangential radiographic inspection (ISO 20769-1:2018) | |
| Non-destructive testing \x96 Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays \x96 Part 2: Double wall radiographic inspection (ISO 20769-2:2018) | |
| Non-destructive testing \x96 Ultrasonic testing \x96 Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017) | |
| Non-destructive testing of welds \x96 Phased array ultrasonic testing (PAUT) \x96 Acceptance levels (ISO 19285:2017) | |
| Non-destructive testing of welds \x96 Ultrasonic testing \x96 Use of automated phased array technology for thin-walled steel components (ISO 20601:2018) | |
| Nuclear energy \x96 Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO 19226:2017) | |
| Oil and gas industries including lower carbon energy \x96 Site-specific assessment of mobile offshore units \x96 Part 1: Jack-ups: elevated at a site \x96 Amendment 1: Corrections to strength of... | |
| Oil and gas industries including lower carbon energy \x96 Specific requirements for offshore structures \x96 Part 3: Topsides structure (ISO 19901-3:2024) | |
| Oil and gas industries including lower carbon energy \x96 Specific requirements for offshore structures \x96 Part 4: Geotechnical design considerations (ISO 19901-4:2025) | |
| Ophthalmic instruments \x96 Corneal topographers | |
| Ophthalmic optics \x96 Contact lenses \x96 Hygienic management of multipatient use trial contact lenses (ISO 19979:2018) | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 1: Concepts and principles (ISO... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 2: Delivery phase of the... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 3: Operational phase of the... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 4: Information exchange (ISO 19650-4:2022)... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 5: Security-minded approach to information... | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x96 Information management using building information modelling \x96 Part 6: Health and safety information... | |
| Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l | |
| Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l | |
| Packaging \x96 Plastics drums \x96 Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l | |
| Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body | |
| Paints and varnishes \x96 Determination of image clarity (degree of sharpness of reflected or transmitted image) (ISO 20266:2018) | |
| Paints and varnishes \x96 Determination of pH value \x96 Part 1: pH electrodes with glass membrane (ISO 19396-1:2017) | |
| Paints and varnishes \x96 Determination of pH value \x96 Part 2: pH electrodes with ISFET technology (ISO 19396-2:2017) | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 1: Multi-impact testing (ISO 20567-1:2017) | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 2: Single-impact test with a guided impact body | |
| Paints and varnishes \x96 Determination of stone-chip resistance of coatings \x96 Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023) | |
| Paints and varnishes \x96 Determination of the film thickness of coatings using an ultrasonic gauge (ISO 19397:2024) | |
| Paints and varnishes \x96 Determination of the scratch resistance of a coating system using a laboratory-scale car-wash | |
| Paints and varnishes \x96 Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016) | |
| Paints and varnishes \x96 Wettability \x96 Part 1: Terminology and general principles (ISO 19403-1:2017) | |
| Paints and varnishes \x96 Wettability \x96 Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2017) | |
| Paints and varnishes \x96 Wettability \x96 Part 3: Determination of the surface tension of liquids using the pendant drop method (ISO 19403-3:2017) | |
| Paints and varnishes \x96 Wettability \x96 Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017) | |
| Paints and varnishes \x96 Wettability \x96 Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only... | |
| Paints and varnishes \x96 Wettability \x96 Part 6: Measurement of dynamic contact angle (ISO 19403-6:2017) | |
| Paints and varnishes \x96 Wettability \x96 Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) (ISO 19403-7:2017) | |
| Paper - Determination of tearing resistance - Elmendorf method | |
| Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) | |
| Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test method | |
| Personal protective equipment \x96 Footwear protecting against risks in foundries and welding \x96 Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) | |
| Personal protective equipment \x96 Footwear protecting against risks in foundries and welding \x96 Part 1: Requirements and test methods for protection against risks in foundries \x96 Amendment 1 (ISO 20349-1:2017/Amd... | |
| Personal protective equipment \x96 Footwear protecting against risks in foundries and welding \x96 Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)... | |
| Personal protective equipment \x96 Footwear protecting against risks in foundries and welding \x96 Part 2: Requirements and test methods for protection against risks in welding and allied processes \x96 Amendment... | |
| Personal protective equipment \x96 Occupational footwear (ISO 20347:2021) | |
| Personal protective equipment \x96 Occupational footwear | |
| Personal protective equipment \x96 Protective footwear (ISO 20346:2021) | |
| Personal protective equipment \x96 Protective footwear \x96 Amendment 1 (ISO 20346:2021/Amd 1:2024) | |
| Personal protective equipment \x96 Safety footwear (ISO 20345:2021) | |
| Personal protective equipment \x96 Safety footwear \x96 Amendment 1 (ISO 20345:2021/Amd 1:2024) | |
| Personal protective equipment \x96 Test methods for footwear (ISO 20344:2021) | |
| Personal protective equipment \x96 Test methods for footwear \x96 Amendment 1 (ISO 20344:2021/Amd 1:2024) | |
| Petroelum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method | |
| Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations | |
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units | |
| Petroleum and natural gas industries \x96 Arctic offshore structures | |
| Petroleum and natural gas industries \x96 Fixed concrete offshore structures | |
| Petroleum and natural gas industries \x96 Fixed steel offshore structures | |
| Petroleum and natural gas industries \x96 Floating offshore structures \x96 Part 1: Monohulls, semi-submersibles and spars | |
| Petroleum and natural gas industries \x96 General requirements for offshore structures | |
| Petroleum and natural gas industries \x96 Site-specific assessment of mobile offshore units \x96 Part 1: Jack-ups (ISO 19905-1:2016) | |
| Petroleum and natural gas industries \x96 Site-specific assessment of mobile offshore units \x96 Part 3: Floating unit (ISO 19905-3:2017) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 10: Marine geophysical investigations (ISO 19901-10:2021) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 2: Seismic design procedures and criteria | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 8: Marine soil investigations (ISO 19901-8:2014) | |
| Petroleum and natural gas industries \x96 Specific requirements for offshore structures \x96 Part 9: Structural integrity management (ISO 19901-9:2019) | |
| Petroleum and natural gas industry \x96 Pipeline transportation systems -Pipeline integrity management specification \x96 Part 2: Full-life cycle integrity management for offshore pipeline (ISO 19345-2:2019) | |
| Petroleum and natural gas industry \x96 Pipeline transportation systems \x96 Geological hazards risk management for onshore pipeline (ISO 20074:2019) | |
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE | |
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB | |
| Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC | |
| Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test | |
| Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015) | |
| Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method | |
| Petroleum and related products \x96 Determination of the extreme-pressure and anti-wear properties of fluids \x96 Four ball method | |
| Petroleum products - Determination of low sulfur content of automotive fuels - Wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Petroleum products - Determination of sulfur content of automotive fules - Ultraviolet fluorescence method | |
| Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry | |
| Petroleum products \x96 Determination of sulfur content of automotive fuels \x96 Wavelength-dispersiv e X-ray fluorescence spectrometry \x96 Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of... | |
| Petroleum, petrochemical and natural gas industries \x96 Production assurance and reliability management (ISO 20815:2018) | |
| Petroleum, petrochemical and natural gas industries \x96 Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018) | |
| Pigments and extenders \x96 Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods (ISO 20427:2023) | |
| Plastics - Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications | |
| Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods | |
| Plastics - Determination of hardness - Part 1: Ball indentation method | |
| Plastics - Determination of hardness - Part 2: Rockwell hardness | |
| Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test | |
| Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Methyl methacrylate-acrylon itrile-butadiene-sty rene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Styrene/acrylonitril e (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics \x96 Acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 19062-2:2019) | |
| Plastics \x96 Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of prope... | |
| Plastics \x96 Decorative solid surfacing materials \x96 Part 3: Determination of properties \x96 Solid surface shapes | |
| Plastics \x96 Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface \x96 Method by analysis of evolved carbon dioxide (ISO 19679:2016) | |
| Plastics \x96 Impact-resistant polystyrene (PS-I) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 19063-2:2020) | |
| Plastics \x96 Methyl methacrylate-acrylon itrile-butadiene-sty rene (MABS) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020) | |
| Plastics \x96 Poly(phenylene ether) (PPE) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 20557-1:2018) | |
| Plastics \x96 Poly(phenylene ether) (PPE) moulding and extrusion materials \x96 Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018) | |
| Plastics \x96 Poly(phenylene sulfide) (PPS) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 20558-1:2018) | |
| Plastics \x96 Poly(phenylene sulfide) (PPS) moulding and extrusion materials \x96 Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018) | |
| Plastics \x96 Polypropylene (PP) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties | |
| Plastics \x96 Styrene-acrylonitril e (SAN) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020) | |
| Plastics \x96 Test specimens | |
| Plastics \x96 Thermoplastic polyester (TP) moulding and extrusion materials \x96 Part 1: Designation system and basis for specifications (ISO 20028-1:2017) | |
| Plastics \x96 Thermoplastic polyester (TP) moulding and extrusion materials \x96 Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) | |
| Plastics \x96 Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion \x96 Part 1: Designation system and basis for specification (ISO 20029-1:2017) | |
| Plastics \x96 Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion \x96 Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) | |
| Plastics and rubber machines \x96 Injection moulding machines \x96 Safety requirements (ISO 20430:2020) | |
| Plastics piping systems \x96 Thermoplastics pipes and fittings for hot and cold water \x96 Test method for the resistance of joints to pressure cycling (ISO 19892:2011) | |
| Plastics piping systems \x96 Thermoplastics pipes and fittings for hot and cold water \x96 Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011) | |
| Protective clothing \x96 Protection against chemicals \x96 Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017) | |
| Protective clothing \x96 Protection against chemicals \x96 Measurement of cumulative permeation of chemicals with low vapour pressure through materials \x96 Amendment 1: Extraction and chemical analysis (ISO 19918:2017/Amd 1:2021) | |
| Protective clothing for use in Snowboarding \x96 Wrist Protectors \x96 Requirements and test methods (ISO 20320:2020) | |
| Public swimming pools \x96 Computer vision systems for the detection of drowning accidents in swimming pools \x96 Safety requirements and test methods (ISO 20380:2017) | |
| Quality management systems \x96 Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear... | |
| Radiation protection \x96 Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006) | |
| Radiological protection \x96 Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020) | |
| Radiological protection \x96 Performance criteria for laboratories using Fluorescence In Situ Hybridization (FISH) translocation assay for assessment of exposure to ionizing radiation (ISO 20046:2019) | |
| Radiological protection \x96 Performance criteria for service laboratories performing biological dosimetry by cytogenetics \x96 Dicentric assay (ISO 19238:2023) | |
| Rail systems for supporting medical equipment (ISO 19054:2005/Amd 1:2016) | |
| Rail systems for supporting medical equipment | |
| Railway applications \x96 Heating, ventilation and air conditioning systems for rolling stock \x96 Part 1: Terms and definitions (ISO 19659-1:2017) | |
| Refractory products - Determination of refractoriness under load - Differential method with rising temperature | |
| Refractory test-piece preparation \x96 Gunning refractory panels by the pneumatic-nozzle mixing type guns | |
| Reinforcement yarns - Determination of linear density | |
| Reinforcement yarns - Determination of twist | |
| Resilient floor coverings \x96 Specification for floor panels/assembly for loose laying (ISO 20326:2016) | |
| Resilient floor coverings \x96 Specification for floor panels/assembly for loose laying \x96 Amendment 1: Requirements depending on the substrate (ISO 20326:2016/Amd 1:2020) | |
| Resistance welding \x96 Locking tapers for electrode holders and electrode caps (ISO 20168:2016) | |
| Safety of machinery \x96 Fire prevention and fire protection (ISO 19353:2015) | |
| Safety of machinery \x96 Instruction handbook \x96 General drafting principles (ISO 20607:2019) | |
| Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials | |
| Ships and marine technology \x96 Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) | |
| Simultaneous interpreting \x96 Equipment \x96 Requirements (ISO 20109:2025) | |
| Simultaneous interpreting \x96 Quality and transmission of sound and image input \x96 Requirements (ISO 20108:2017) | |
| Slotted countersunk flat head screws - Product grade A | |
| Slotted raised countersunk head screws - Product grade A | |
| Small craft \x96 Electric navigation lights \x96 Performance of LED lights (ISO 19009:2015) | |
| Soil quality - Effects of pollutants on insect larvae (Oxythyrea funesta) - Determination of acute toxicity | |
| Soil quality \x96 Guidance on the determination of background values | |
| Soil quality \x96 Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018) | |
| Solid biofuels \x96 Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017) | |
| Solid biofuels \x96 Determination of self-heating of pelletized biofuels \x96 Part 1: Isothermal calorimetry (ISO 20049-1:2020) | |
| Solid biofuels \x96 Safe handling and storage of solid biofuel pellets in commercial and industrial applications (ISO 20024:2020) | |
| Solid biofuels \x96 Safety of solid biofuel pellets \x96 Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018) | |
| Standard cost coding system for oil and gas production and processing facilities (ISO 19008:2016) | |
| Stationary training equipment \x96 Part 10: Exercise bicycles with a fixed wheel or without freewheel \x96 Additional specific safety requirements and test methods (ISO 20957-10:2017) | |
| Stationary training equipment \x96 Part 1: General safety requirements and test methods | |
| Stationary training equipment \x96 Part 2: Strength training equipment, additional specific safety requirements and test methods (ISO 20957-2:2020) | |
| Stationary training equipment \x96 Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016) | |
| Stationary training equipment \x96 Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016) | |
| Stationary training equipment \x96 Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020) | |
| Stationary training equipment \x96 Part 8: Steppers, stairclimbers and climbers \x96 Additional specific safety requirements and test methods (ISO 20957-8:2017) | |
| Stationary training equipment \x96 Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016) | |
| Stationary training equipment \x96 Part 9: Elliptical trainers, additional specific safety requirements and test methods \x96 Amendment 1 (ISO 20957-9:2016/Amd 1:2019) | |
| Sterile drainage catheters and accessory devices for single use (ISO 20697:2018) | |
| Sterile urethral catheters for single use (ISO 20696:2018) | |
| Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices | |
| Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test | |
| Textile fibres \x96 Determination of linear density \x96 Gravimetric method and vibroscope method | |
| Textile glass \x96 Yarns \x96 Designation \x96 Amendment 1 | |
| Textile glass \x96 Yarns \x96 Designation | |
| Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015) | |
| Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method | |
| Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester | |
| Textiles \x96 Determination of antibacterial activity of textile products | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests \x96 Amendment 1 (ISO 20932-1:2018/Amd 1:2021) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 1: Strip tests | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 2: Multiaxial tests (ISO 20932-2:2018) | |
| Textiles \x96 Determination of the elasticity of fabrics \x96 Part 3: Narrow fabrics (ISO 20932-3:2018) | |
| Textiles \x96 Man-made fibres \x96 Generic names | |
| Textiles \x96 Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends \x96 Part 1: Fibre identification using microscopy methods (ISO 20706-1:2019) | |
| Textiles \x96 Qualitative and quantitative proteomic analysis of some animal hair fibres \x96 Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO 20418-1:2018) | |
| Textiles \x96 Qualitative and quantitative proteomic analysis of some animal hair fibres \x96 Part 3: Peptide detection using LC-MS without protein reduction (ISO 20418-3:2020) | |
| Textiles \x96 Quantitative microscopical analysis \x96 General principles of testing (ISO 20705:2019) | |
| Thermal spraying \x96 Metallic and other inorganic coatings \x96 Zinc, aluminium and their alloys | |
| Thermal spraying \x96 Zinc, aluminium and their alloys \x96 Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) | |
| Thermal spraying \x96 Zinc, aluminium and their alloys \x96 Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) | |
| Underground mining machines \x96 Mobile extracting machines at the face \x96 Safety requirements for shearer loaders and plough systems (ISO 19225:2017) | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions (ISO 20768:2018) | |
| Vapour products \x96 Routine analytical vaping machine \x96 Definitions and standard conditions \x96 Amendment 1: Correction of puff profile requirements (ISO 20768:2018/Amd 1:2025) | |
| Vegetable oils \x96 Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with online-coupled high performance liquid chromatography-gas chromatography-flame ionization detection (HPLC-GC-FID) analysis \x96 Method for... | |
| Vitreous and porcelain enamels \x96 Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017) | |
| Vitreous and porcelain enamels \x96 Terminology \x96 Part 1: Terms and definitions (ISO 19496-1:2017) | |
| Vitreous and porcelain enamels \x96 Terminology \x96 Part 2: Visual representations and descriptions (ISO 19496-2:2017) | |
| Water quality - Detection of Salmonella spp. | |
| Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection | |
| Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation | |
| Water quality - Determination of selected phthalates using gas chromatography/mass spectrometry | |
| Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test | |
| Water quality - Guidance on marine biological surveys of hard-substrate communities | |
| Water quality - Sampling for microbiological analysis | |
| Water quality \x96 Determination of cyclic volatile methylsiloxanes in water \x96 Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS) (ISO 20596-2:2021) | |
| Water quality \x96 Determination of selected highly volatile organic compounds in water \x96 Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) (ISO 20595:2018) | |
| Water quality \x96 Determination of the estrogenic potential of water and waste water \x96 Part 1: Yeast estrogen screen (Saccharomyces cerevisiae) (ISO 19040-1:2018) | |
| Water quality \x96 Determination of the estrogenic potential of water and waste water \x96 Part 2: Yeast estrogen screen (A-YES, Arxula adeninivorans) (ISO 19040-2:2018) | |
| Water quality \x96 Determination of the estrogenic potential of water and waste water \x96 Part 3: In vitro human cell-based reporter gene assay (ISO 19040-3:2018) | |
| Water quality \x96 Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza \x96 Method using a stock culture independent microbiotest (ISO... | |
| Water quality \x96 Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2018)... | |
| Welding consumables \x96 Rods for gas welding of non-alloy and creep-resisting steels \x96 Classification (ISO 20378:2017) | |
| Welding consumables \x96 Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys \x96 Classification | |
| Woodworking machines \x96 Safety \x96 Part 10: Building site saws (contractor saws) (ISO 19085-10:2018) | |
| Woodworking machines \x96 Safety \x96 Part 11: Combined machines (ISO 19085-11:2020) | |
| Woodworking machines \x96 Safety \x96 Part 12: Tenoning/profiling machines (ISO 19085-12:2021) | |
| Woodworking machines \x96 Safety \x96 Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020) | |
| Woodworking machines \x96 Safety \x96 Part 14: Four-sided moulding machines (ISO 19085-14:2021) | |
| Woodworking machines \x96 Safety \x96 Part 15: Presses (ISO 19085-15:2021) | |
| Woodworking machines \x96 Safety \x96 Part 16: Table band saws and band re-saws (ISO 19085-16:2021) | |
| Woodworking machines \x96 Safety \x96 Part 17: Edge banding machines fed by chains (ISO 19085-17:2021) | |
| Woodworking machines \x96 Safety \x96 Part 1: Common requirements (ISO 19085-1:2017) | |
| Woodworking machines \x96 Safety \x96 Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017) | |
| Woodworking machines \x96 Safety \x96 Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) | |
| Woodworking machines \x96 Safety \x96 Part 5: Dimension saws (ISO 19085-5:2017) | |
| Woodworking machines \x96 Safety \x96 Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017) | |
| Woodworking machines \x96 Safety \x96 Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) | |
| Woodworking machines \x96 Safety \x96 Part 8: Wide belt sanding machines and surface treating machines (ISO 19085-8:2024) | |
| Woodworking machines \x96 Safety \x96 Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024) | |
| Woodworking machines \x96 Safety requirements \x96 Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) | |
| Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test |
| << Prev | Next >> |