Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
300
350
400
450
500
550
600
610
620
630
640
650
655
656
657
658
659
660
661
662
663
664
665
666
667
670
680
690
700
710
720
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| AC motor capacitors \x96 Part 1: General \x96 Performance, testing and rating \x96 Safety requirements \x96 Guidance for installation and operation | |
| AC motor capacitors \x96 Part 2: Motor start capacitors | |
| Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC | |
| Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (\xb1 45\xb0 tensile test) | |
| Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures | |
| Aerospace series \x96 Plates \x96 Aluminium alloy 2024 \x96 Close tolerances flatness \x96 Thickness \x96 6 mm = a = 55 mm \x96 Dimensions | |
| Aerospace series \x96 Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel \x96 Dimensions and loads \x96 Inch series | |
| Aerospace series \x96 Screw, 100\xb0 countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated \x96 Classification: 1 100 MPa (at ambient temperature)/315... | |
| Aerospace series \x96 Test methods for metallic materials \x96 Determination of density according to displacement method | |
| Alternating current disconnectors and earthing switches | |
| Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food | |
| Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery | |
| Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff | |
| Aluminium and aluminium alloys \x96 Wrought forging stock \x96 Part 2: Mechanical properties | |
| Aluminium and aluminium alloys \x96 Wrought forging stock \x96 Part 3: Tolerances on dimensions and form | |
| Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges | |
| Appliance couplers for household and similar general purposes \x96 Part 1: General requirements | |
| Appliance couplers for household and similar general purposes \x96 Part 2-1: Sewing machine couplers | |
| Appliance couplers for household and similar general purposes \x96 Part 2-2: Interconnection couplers for household and similar equipment | |
| Appliance couplers for household and similar general purposes \x96 Part 2-4: Couplers dependent on appliance weight for engagement | |
| Appliance couplers for household and similar general purposes \x96 Part 2: Appliance couplers with a degree of protection higher than IPXO | |
| Appliance couplers for household and similar general purposes \x96 Part 3: Standard sheets and gauges \x96 AMENDMENT 1 | |
| Appliance couplers for household and similar general purposes \x96 Part 3: Standard sheets and gauges | |
| Calculation of the effective parameters of magnetic piece parts | |
| Conductors of insulated cables | |
| Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries | |
| Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment | |
| Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings | |
| Dependability management - Part 2: Guidance for dependability management | |
| Dependability management - Part 3-11: Application guide - Reliability centred maintenance | |
| Dependability management - Part 3-12: Application guide - Integrated logistic support | |
| Dependability management - Part 3-14: Application guide - Maintainance and maintenance support | |
| Dependability management - Part 3-15: Application guide - Engineering of system dependability | |
| Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services | |
| Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology | |
| Dependability management - Part 3-2: Application guide - Collection of dependability data from the field | |
| Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements | |
| Dependability management \x96 Part 1: Dependability management systems | |
| Dependability management \x96 Part 3-3: Life cycle costing analysis \x96 Application guide | |
| Double-capped fluorescent lamps - Performance specifications | |
| Double-capped fluorescent lamps \x96 Performance specifications | |
| Edison screw lampholders | |
| Electric cables - Tests on extruded oversheaths with a special protective function | |
| Electric irons for household or similar use \x96 Methods for measuring performance | |
| Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage | |
| Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 \xb5s impulse tests | |
| Electrical installations in ships - Part 507: Small vessels | |
| Electrical installations in ships \x96 Part 507: Pleasure craft | |
| Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results | |
| Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria | |
| Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens | |
| Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 \xb0C | |
| Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens | |
| Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures | |
| Electrical insulating materials \x96 Thermal endurance properties \x96 Part 2: Determination of thermal endurance properties of electrical insulating materials \x96 Choice of test criteria | |
| Electrical insulating materials \x96 Thermal endurance properties \x96 Part 3: Instructions for calculating thermal endurance characteristics | |
| Electrical insulating materials \x96 Thermal endurance properties \x96 Part 5: Determination of relative thermal endurance index (RTE) of an insulating material | |
| Electrical insulating materials \x96 Thermal endurance properties \x96 Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method | |
| Electrical insulation - Thermal evaluation and designation | |
| Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal) | |
| Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests | |
| Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests | |
| Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems | |
| Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirerments and tests | |
| Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies | |
| Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal | |
| Electroacoustics - Hearing aids - Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes | |
| Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions | |
| Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones | |
| Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts | |
| Electroacoustics - Simulators of human head and ear - Part 5: 2 cm\xb3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear... | |
| Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurements of bone vibrators | |
| Electroacoustics \x96 Hearing aids \x96 Part 0: Measurement of the performance characteristics of hearing aids | |
| Electroacoustics \x96 Hearing aids \x96 Part 13: Electromagnetic compatibility (EMC) | |
| Electroacoustics \x96 Hearing aids \x96 Part 4: Induction loop systems for hearing aid purposes \x96 Magnetic field strength | |
| Electroacoustics \x96 Simulators of human head and ear \x96 Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry | |
| Explosive atmospheres \x96 Part 6: Equipment protection by liquid immersion "o" | |
| Explosive atmospheres \x96 Part 7: Equipment protection by increased safety "e" | |
| Fixed resistors for use in electronic equipment - Part 2: Sectional specification - Leaded fixed low power film resistors | |
| Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G | |
| Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors | |
| Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ | |
| Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors | |
| Fixed resistors for use in electronic equipment \x96 Part 1: Generic specification | |
| Flanges for waveguides - Part 2:Relevant specifications for flanges for ordinary rectangular waveguides | |
| Flanges for waveguides \x96 Part 1: General requirements | |
| Flanges for waveguides \x96 Part 2: Relevant specifications for flanges for ordinary rectangular waveguides | |
| Flanges for waveguides \x96 Part 4: Relevant specifications for flanges for circular waveguides | |
| Fluids for electrotechnical applications \x96 Unused mineral insulating oils for transformers and switchgear | |
| Glow-starters for fluorescent lamps | |
| Graphite electrodes for electric arc furnaces - Dimensions and designation | |
| Grid systems for printed circuits | |
| Hearing aids - Part 12: Dimensions of electrical connector systems | |
| Hearing aids - Part 14: Specification of a digital interface | |
| Hearing aids \x96 Part 0: Measurement of electroacoustical characteristics | |
| High-pressure mercury vapour lamps - Performance specifications | |
| High-pressure mercury vapour lamps \x96 Performance specifications | |
| High-voltage - Part 1: Switches for rated voltages above 1 kV and less than 52 kV | |
| High-voltage fuses \x96 Part 1: Current-limiting fuses | |
| High-voltage test techniques - Partial discharge measurements | |
| Hollow metallic waveguides \x96 Part 1: General requirements and measuring methods | |
| Hollow metallic waveguides \x96 Part 2: Relevant specifications for ordinary rectangular waveguides | |
| Hollow metallic waveguides \x96 Part 4: Relevant specifications for circular waveguides | |
| Household and similar electrical appliances - Safety - Part 1: General requirements | |
| Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections | |
| Household and similar electrical appliances \x96 Safety \x96 Part 1: General requirements | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-101: Particular requirements for vaporizers | |
| Household and similar electrical appliances \x96 Safety \x96 Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines | |
| Household electric blankets - Methods for measuring performance | |
| Hydraulic turbines - Testing of control systems | |
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests | |
| IEC standard frequencies | |
| Impulse tests on cables and their accessories | |
| Insulated bushings for alternating voltages above 1 000 V | |
| Insulating liquids - Determination of the breakdown voltage at power frequency - Test method | |
| Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan phi) and d.c. resistivity | |
| Insulators for overhead lines with a nominal voltage above 1 kV \x96 Ceramic or glass insulator units for a.c. systems \x96 Characteristics of insulator units of the cap and pin... | |
| Lead acid traction batteries -- Part 1: General requirements and methods of tests | |
| Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells | |
| Low-pressure sodium vapour lamps - Performance specifications | |
| Low-voltage fuses - Part 1: General requirements | |
| Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) | |
| Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) | |
| Low-voltage fuses \x96 Part 1: General requirements | |
| Low-voltage fuses \x96 Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Low-voltage fuses \x96 Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems | |
| Magnetic tape sound recording and reproducing systems - Part 2: Calibration tapes | |
| Magnetic tape sound recording and reproducing systems - Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape | |
| Magnetic tape sound recording and reproducing systems - Part 5: Electrical magnetic tape properties | |
| Magnetic tape sound recording and reproducing systems - Part 7: Cassette for commercial tape records and domestic use | |
| Magnetic tape sound recording and reproducing systems \x96 Part 1: General conditions and requirements | |
| Magnetic tape sound recording and reproducing systems \x96 Part 4: Mechanical magnetic tape properties | |
| Measurement of the dimensions of a cylindrical component with axial terminations | |
| Measuring relays and protection equipment - Part 121: Functional requirements for distance protection | |
| Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection | |
| Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays | |
| Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection | |
| Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests | |
| Measuring relays and protection equipment \x96 Part 1: Common requirements | |
| Measuring relays and protection equipment \x96 Part 26: Electromagnetic compatibility requirements | |
| Measuring relays and protection equipment \x96 Part 27: Product safety requirements | |
| Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices | |
| Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits | |
| Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages | |
| Mechanical standardization of semiconductor devices - Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Dimensions of P-VSON | |
| Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array... | |
| Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA | |
| Mechanical standardization of semiconductor devices - Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch... | |
| Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)... | |
| Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage | |
| Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals | |
| Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small... | |
| Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small... | |
| Mechanical standardization of semiconductor devices - Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch... | |
| Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm... | |
| Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad... | |
| Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball... | |
| Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array... | |
| Mechanical standardization of semiconductor devices - Part 6-6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch land grid... | |
| Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad... | |
| Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages | |
| Mechanical standardization of semiconductor devices \x96 Part 4: Coding system and classification into forms of package outlines for semiconductor device packages | |
| Mechanical standardization of semiconductor devices \x96 Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA) | |
| Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials | |
| Method of measurement of current noise generated in fixed resistors | |
| Methods of measurement for radio transmitters - Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas | |
| Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting | |
| Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters | |
| Methods of measurement for radio transmitters \x96 Part 8: Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers | |
| Methods of measurement for radio transmitters \x96 Part 9: Performance characteristics for television transposers | |
| Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions | |
| Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers | |
| Methods of measurement on radio receivers for various of classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions | |
| Methods of measurement on receivers for television - Part 7: HDTV displays | |
| Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies | |
| Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels | |
| Miniature fuses - Part 10: User guide for miniature fuses | |
| Miniature fuses - Part 3: Sub-miniature fuse-links | |
| Miniature fuses \x96 Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| Miniature fuses \x96 Part 2: Cartridge fuse-links | |
| Miniature fuses \x96 Part 3: Sub-miniature fuse-links | |
| Miniature fuses \x96 Part 4: Universal Modular Fuse-links (UMF) \x96 Through-hole and surface mount types | |
| Miniature fuses \x96 Part 5: Guidelines for quality assessment of miniature fuse-links | |
| Miniature fuses \x96 Part 6: Fuse-holders for miniature cartridge fuse-links | |
| Miniature fuses \x96 Part 6: Fuse-holders for miniature fuse-links | |
| Miniature fuses \x96 Part 7: Miniature fuse-links for special applications | |
| Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes | |
| Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes | |
| Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms | |
| Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components | |
| Packaging of components for automatic handling \x96 Part 1: Tape packaging of components with axial leads on continuous tapes | |
| Packaging of components for automatic handling \x96 Part 2: Tape packaging of components with axial leads on continuous tapes | |
| Packaging of components for automatic handling \x96 Part 3: Packaging of surface mount components on continuous tapes | |
| Packaging of components for automatic handling \x96 Part 5: Matrix trays | |
| Packaging of winding wires - Part 1: Containers for round winding wires | |
| Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions | |
| Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions | |
| Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials | |
| Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools. | |
| Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material | |
| Packaging of winding wires - Part 3: Taper barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials | |
| Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools | |
| Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions | |
| Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material | |
| Plugs, socket-outlets and couplers for industrial purposes \x96 Part 1: General requirements | |
| Plugs, socket-outlets and couplers for industrial purposes \x96 Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories | |
| Plugs, socket-outlets and couplers for industrial purposes \x96 Part 4: Switched socket-outlets and connectors with or without interlock | |
| Power capacitors for induction heating installations \x96 Part 1: General | |
| Preferred diameters of wire terminations of capacitors and resistors | |
| Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges | |
| Primary batteries - Part 4: Safety standard for lithium batteries | |
| Primary batteries - Part 5: Safety of batteries with aqueous electrolyte | |
| Primary batteries \x96 Part 1: General | |
| Primary batteries \x96 Part 2: Physical and electrical specifications | |
| Primary batteries \x96 Part 3: Watch batteries | |
| Printed board design, manufacture and assembly \x96 Terms and definitions | |
| Quartz crystal units of assessed quality - Part 1: Generic specification | |
| Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections | |
| Quartz crystal units of assessed quality \x96 Part 1: Generic specification | |
| Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy less than 60 keV) contamination meters and monitors | |
| Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impedance 50... | |
| Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction | |
| Railway applications \x96 Traction transformers and inductors on board rolling Stock | |
| Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system | |
| Recommended methods of measurement on receivers for television broadcast transmissions - Part 8: Measurement on D2-MAC/packet equipment | |
| Safety of household and similar electrical appliances \x96 Part 1: General requirements | |
| Safety of machinery - Electrical equipment of machines - Part 1: General requirements | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding... | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 1: General requirements \x96 CORRECTIONS 1 | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 1: General requirements | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 31: Particular requirements for sewing machines, units and systems | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 32: Requirements for hoisting machines | |
| Safety of machinery \x96 Electrical equipment of machines \x96 Part 33: Requirements for semiconductor fabrication equipment | |
| Safety requirements for radio transmitting equipment | |
| Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters | |
| Semiconductor converters \x96 General requirements and line commutated converters \x96 Part 1-1: Specification of basic requirements | |
| Semiconductor convertors \x96 General requirements and line commutated convertors \x96 Part 1-3: Transformers and reactors | |
| Series capacitors for power systems - Part 1: General | |
| Series capacitors for power systems \x96 Part 1: General | |
| Series capacitors for power systems \x96 Part 2: Protective equipment for series capacitor banks | |
| Series capacitors for power systems \x96 Part 3: Internal fuses | |
| Series capacitors for power systems \x96 Part 4: Thyristor controlled series capacitors | |
| Sound system eqipment - Part 12: Application of connectors for broadcast and similar use | |
| Sound system equipment - Part 5: Loudspeakers | |
| Sound system equipment \x96 Part 16: Objective rating of speech intelligibility by speech transmission index | |
| Sound system equipment \x96 Part 3: Amplifiers | |
| Sound system equipment \x96 Part 4: Microphones | |
| Sound system equipment \x96 Part 7: Headphones and earphones | |
| Specification for particular types of winding wires \x96 Part 40: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240 | |
| Specifications for particular types of winding wire \x96 Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire | |
| Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire | |
| Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 | |
| Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 | |
| Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105 | |
| Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 | |
| Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 | |
| Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire | |
| Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 31: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 32: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound, silicone varnished-treated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 42: Polyester-amide-imid e enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 | |
| Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 | |
| Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 | |
| Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires \x96 Part 0-10: General requirements \x96 Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-1: General requirements \x96 Enamelled round copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-2: General requirements \x96 Enamelled rectangular copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-3: General requirements \x96 Enamelled round aluminium wire | |
| Specifications for particular types of winding wires \x96 Part 0-4: General requirements \x96 Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-4: General requirements \x96 Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-5: General requirements \x96 Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-6: General requirements \x96 Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires \x96 Part 0-7: General requirements \x96 Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600... | |
| Specifications for particular types of winding wires \x96 Part 0-8: General requirements \x96 Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire... | |
| Specifications for particular types of winding wires \x96 Part 0-9: General requirements \x96 Enamelled rectangular aluminium wire | |
| Specifications for particular types of winding wires \x96 Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | |
| Specifications for particular types of winding wires \x96 Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires \x96 Part 15: Polyesterimide enamelled round aluminium wire, class 180 | |
| Specifications for particular types of winding wires \x96 Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 | |
| Specifications for particular types of winding wires \x96 Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 | |
| Specifications for particular types of winding wires \x96 Part 20: Solderable polyurethane enamelled round copper wire, class 155 | |
| Specifications for particular types of winding wires \x96 Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 | |
| Specifications for particular types of winding wires \x96 Part 23: Solderable polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires \x96 Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 | |
| Specifications for particular types of winding wires \x96 Part 26: Polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires \x96 Part 28: Polyesterimide enamelled rectangular copper wire, class 180 | |
| Specifications for particular types of winding wires \x96 Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer | |
| Specifications for particular types of winding wires \x96 Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires \x96 Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires \x96 Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires \x96 Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires \x96 Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires \x96 Part 39: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires \x96 Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires \x96 Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires \x96 Part 40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires \x96 Part 42: Polyester-amide-imid e enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires \x96 Part 46: Aromatic polyimide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires \x96 Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires \x96 Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires \x96 Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm,... | |
| Specifications for particular types of winding wires \x96 Part 57: Polyamide-imide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires \x96 Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for particular types of winding wires \x96 Part 59: Polyamide-imide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires \x96 Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire,... | |
| Specifications for particular types of winding wires \x96 Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180... | |
| Specifications for particular types of winding wires \x96 Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200... | |
| Specifications for particular types of winding wires \x96 Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 | |
| Specifications for particular types of winding wires \x96 Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 | |
| Specifications for particular types of winding wires \x96 Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 | |
| Specifications for particular types of winding wires \x96 Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires \x96 Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires \x96 Part 72: Polyester glass-fibre wound fused, silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires \x96 Part 8: Polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires Part 26: Polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 | |
| Specifications for particular types of winding wires Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Standard conditions for use prior to and during the testing of solid electrical insulating materials | |
| Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems | |
| Surge arresters - Part 5: Selection and application recommendations | |
| Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations | |
| Surge arresters \x96 Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV | |
| Tap-changers - Part 1: Performance requirements and test methods | |
| Test procedure for the determination of the temperature index of enamelled winding wires | |
| Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of... | |
| Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable \x96 Apparatus | |
| Tests on electric and optical fibre cables under fire conditions -- Part 1-2: Test for vertical flame propagation for a single insulated wire or cable \x96 Procedure for 1 kW... | |
| Tests on electric and optical fibre cables under fire conditions -- Part 1-3: Test for vertical flame propagation for a single insulated wire or cable \x96 Procedure for determination of... | |
| Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable \x96 Apparatus | |
| Tests on electric and optical fibre cables under fire conditions -- Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable \x96 Procedure for diffusion... | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 1-1: Test for vertical flame propagation for a single insulated wire or cable \x96 Apparatus | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 1-2: Test for vertical flame propagation for a single insulated wire or cable \x96 Procedure for 1 kW... | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables \x96 Apparatus | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables \x96 Category A F/R | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables \x96 Category A | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables \x96 Category B | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables \x96 Category C | |
| Tests on electric and optical fibre cables under fire conditions \x96 Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables \x96 Category D | |
| Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V | |
| Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV | |
| Vacuum cleaners for household use \x96 Part 1: Dry vacuum cleaners \x96 Methods for measuring the performance |
| << Prev | Next >> |