Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
330
340
350
360
370
380
383
384
385
386
387
388
389
390
391
392
393
394
395
400
410
420
430
440
450
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks | |
| Analyser Systems - Guide to Technical Enquiry and Bid Evaluation | |
| Artificial intelligence exchange and service tie to all test environments (AI-ESTATE) | |
| Behavioural langages VITALASIC (application specific integrated circuit) modeling specification | |
| Behavioural languages - Part 1-1: VHDL language reference manual | |
| Behavioural languages - Part 4: Verilog(R) hardware description language | |
| Behavioural languages - Part 5: VITAL ASIC (application specific integrated circuit) modeling specification | |
| Behavioural languages Part 6: VHDL Analog and Mixed-Signal Extensions | |
| Behavioural languages Part 8: Standard SystemC\xae Analog/Mixed-Signal Extensions Language Reference Manual | |
| Behavioural languages. Verilog\xae hardware description language | |
| Behavioural Languages. VHDL Language Reference Manual | |
| Blankets of Insulating Material for Electrical Purposes | |
| Cable management systems Cable ties for electrical installations | |
| Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-3: Particular requirements \x96 Slotted cable trunking systems intended for installation in cabinets | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-4: Particular requirements \x96 Service poles and service posts | |
| Calculation of the Cyclic and Emergency Current Rating of Cables Part 3: Cyclic Rating Factor for Cables of all Voltages, with Partial Drying of the Soil | |
| Characteristics of DAB receivers | |
| Coaxial communication cable Part 1-125: Electrical test methods \x97 Test for equivalent permittivity and equivalent dissipation factor of dielectric | |
| Coaxial communication cables Part 1-100: Electrical test methods - General requirements | |
| Coaxial communication cables Part 1-108: Electrical test methods - Test for phase, phase constant, phase and group delay, propagation velocity, electrical length, and mean characteristic impedance | |
| Coaxial communication cables Part 1-116: Electrical test methods \x97 Test for impedance with time domain reflectometry (TDR) | |
| Coaxial communication cables Part 1-119: Electrical test methods - RF average power rating | |
| Coaxial communication cables Part 1-123: Electrical test methods \x97 Test for attenuation constant of radiating cable | |
| Coaxial communication cables Part 1-124: Electrical test methods - Test for coupling loss of radiating cable | |
| Coaxial communication cables Part 1-126: Electrical test methods - Corona extinction voltage | |
| Coaxial communication cables Part 1-127: Electrical test methods \x97 Link loss of radiating cable | |
| Coaxial communication cables Part 1-128: Electrical test methods - Polarization directivity of radiating cable | |
| Coaxial communication cables Part 1-200: Environmental test methods - General requirements | |
| Coaxial communication cables Part 1-206: Environmental test methods - Climatic sequence | |
| Coaxial communication cables Part 1-212: Environmental test methods - UV stability | |
| Coaxial communication cables Part 1-326: Mechanical test methods - Hanger test | |
| Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric | |
| Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric | |
| Coaxial communication cables Part 12: Specification for spacer clamps for radiating cables | |
| Coaxial communication cables Part 13-1: Blank detail specification for semi-rigid cables with silicon dioxide dielectric | |
| Coaxial communication cables Part 13: Sectional specification for semi-rigid cables with silicon dioxide dielectric | |
| Coaxial communication cables Part 1\x96114. Electrical test methods \x97 Test for inductance | |
| Coaxial communication cables Part 4-1: Blank detail specification for radiating cables | |
| Coaxial communication cables Part 6-1: Blank detail specification for CATV drop cables | |
| Coaxial communication cables Part 6-5: Detail specification for Type A quad-shield CATV drop cables with screening class A++ | |
| Coaxial communication cables Part 6: Sectional specification for CATV drop cables | |
| Coaxial communication cables Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/ IEC 11801-4 - Indoor drop cables for systems operating at 5 MHz - 6... | |
| Coaxial communication cables Part 8-1: Blank detail specification for semi-flexible cables with fluoropolymer dielectric | |
| Coaxial communication cables Part 8: Sectional specification for semi-flexible cables with fluoropolymer dielectric | |
| Coaxial communication cables Part 9-1: Flexible RF coaxial cables \x97 Blank detail specification | |
| Coaxial communication cables Part 9-2: Detail specification for 50-0,4 type RF flexible cables | |
| Coaxial communication cables Part 9: Sectional specification for RF flexible cables | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-103: Power connectors - Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67 with... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-104: Power connectors - Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking IP65/IP67 with... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-108: Power connectors - Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V rectangular... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-109: Power connectors - Detail specification for 2P 130 A, 1 000 V plus 2P 5 A 50 V rectangular... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-111: Power connectors - Detail specification for 3-pole snap locking rectangular connectors with IP65/IP67 plastic housing for rated current of... | |
| Connectors for electrical and electronic equipment - Product requirements Part 8-112: Power connectors - Detail specification for 2-pole snap locking rectangular connectors with IP65/IP67 plastic housing for rated current of... | |
| Connectors for optical fibres and cables - Part 10-1: Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1 | |
| Connectors for optical fibres and cables - Part 10-2: Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1 | |
| Connectors for optical fibres and cables - Part 10-3: Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre | |
| Connectors for optical fibres and cables - Part 14-1: Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b | |
| Connectors for optical fibres and cables - Part 14-3: Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre | |
| Connectors for optical fibres and cables - Part 14-4: Detail specification for fibre optic adaptor (simplex) type SC for multimode fibre | |
| Connectors for optical fibres and cables - Part 14-5: Detail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1 | |
| Converter transformers Part 3: Application guide | |
| Core model of the electronics domain | |
| Delay and Power Calculation Standards Part 1: Integrated Circuit (IC) Open Library Architecture (OLA) | |
| Delay and power calculation standards Part 3: Standard Delay Format (SDF) for the electronic design process | |
| Design and Verification of Low-Power Integrated Circuits | |
| Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 14: Non-linear PCM bitstreams according to the AC-4 format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 10: Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 11: MPEG-4 AAC and its extensions and MPEG-D USAC in LATM/LOAS | |
| Digital audio - Interface for non-linear pcm encoded audio bitstreams applying IEC 60958 Part 13: MPEG-H 3D Audio | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 15: Non-linear PCM bit streams according to Auro-Cx format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 16: AVSA | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 17: Non-linear PCM bitstreams according to the AVS3-P3 format | |
| Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Burst-info | |
| Digital audio \x96 Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 3: Non-linear PCM bitstreams according to the AC-3 and enhanced AC-3 formats | |
| Digital audio \x97 Interface for non-linear PCM Encoded audio bitstreams applying IEC 60958 Part 1: General | |
| Digital Audio Tape (DAT) Cassette System Part 4: Character Pack Format | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1-1: Architecture and protocols \x96 Core architecture and protocols | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1-2: Architecture and protocols - Extended Digital Media Renderer | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1-3: Architectures and protocols - Cloud access | |
| Digital living network ALLIANCE (DLNA) home networked device interoperability guidelines Part 10: Low-power mode | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: Media format profiles | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5: Device Profiles | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 6-1: Remote User Interface - HTML5 | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 6-2: Remote user interface - RVU | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 7: Authentication | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 8: Diagnostics | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 9: HTTP Adaptive Delivery | |
| Digital Test Interchange Format (DTIF) | |
| Discrete Semiconductor Devices and Integrated Circuits - Part 5-1: Optoelectronic Devices - General | |
| Discrete semiconductor devices and integrated circuits. Part 14-3: Semiconductor devices. Semiconductor sensors. Pressure sensors | |
| Discrete semiconductor devices Part 8-4: Metal-oxide-semicond uctor field-effect transistors (MOSFETs) for power switching applications) | |
| Display lighting unit Part 1-2: Terminology and letter symbols | |
| Display lighting unit Part 2-2: Measuring methods of LED light bars used in LCD BLUs | |
| Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification | |
| Distribution automation using distribution line carrier systems - Part 1: General considerations - Section 1: Guide to distribution automation system architecture | |
| Distribution automation using distribution line carrier systems - Part 1: General considerations - Section 4: Guide to identification of data transmission parameters concerning medium and low-voltage distribution mains | |
| Distribution automation using distribution line carrier systems - Part 5: Lower layer profiles - Section 1: Guide to Spread Frequency Shift Keying (S-FSK) profile | |
| Distribution automation using distribution line carrier systems Part 3-1: Mains signalling requirements Frequency bands and output levels | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations Part 3: Circuit-breakers for DC operation | |
| Electrical Apparatus for Explosive Gas Atmospheres - Electrical Resistance Trace Heating - Part 1: General and Testing Requirements | |
| Electrical Apparatus for Explosive Gas Atmospheres - Electrical Resistance Trace Heating - Part 2: Application Guide for Design, Installation and Maintenance | |
| Electrical Apparatus for Use in the Presence of Combustible Dust - Part 4: Type of Protection "pD" | |
| Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c. | |
| Electrical insulation systems \x97 Thermal evaluation of modifications to an established electrical insulation system (EIS) Part 2: Form-wound EIS | |
| Electricity metering \x97 Payment systems Part 41: Standard transfer specification (STS) \x97 Application layer protocol for one-way token carrier systems | |
| Electricity metering data exchange - The DLMS/COSEM suite Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks | |
| Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 7: Low Frequency Magnetic Fields in Various Environments | |
| Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A | |
| Electromagnetic Compatibility (EMC) - Part 4-23: Testing and Measurement Techniques - Test Methods for Protective Devices for HEMP and Other Radiated Disturbances | |
| Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations Basic EMC publication | |
| Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines Section 2: Earthing and cabling | |
| Electromagnetic Compatibility (EMC) Part 3-8: Limits - Guide to Signalling on Low-Voltage Electrical Installations - Emission Levels, Frequency Bands and Electromagnetic Disturbance Levels | |
| Electromagnetic compatibility (EMC) Part 4-36: Testing and measurement techniques \x97 IEMI immunity test methods for equipment and systems | |
| Electromagnetic compatibility (EMC) Part 5-6: Installation and mitigation guidelines \x97 Mitigation of external EM influences | |
| Electromagnetic compatibility (EMC) Part 6-6: Generic standards HEMP immunity for indoor equipment | |
| Electrostatics - Part 5-1: Protection of Electronic Devices from Electrostatic Phenomena - General Requirements | |
| Electrostatics Part 4-6: Standard test methods for specific applications - Wrist straps | |
| Electrostatics Part 4-8: Standard test methods for specific applications - Discharge shielding - Bags | |
| End-face image analysis procedure for the calibration of optical fibre geometry test sets | |
| Enterprise-control system integration Part 1: Models and terminology | |
| Enterprise-control system integration Part 2: Object model attributes | |
| Enterprise-control system integration Part 5: Business to manufacturing transactions | |
| Enterprise-control system integration Part 6: Messaging service model | |
| Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes on semiconductor devices | |
| Environmental considerations specific to insulated electrical power and control cables | |
| Equipment for continuous monitoring of radioactivity in gaseous effluents Part 1: General requirements | |
| Equipment for continuous monitoring of radioactivity in gaseous effluents Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols | |
| Equipment for continuous monitoring of radioactivity in gaseous effluents Part 3: Specific requirements for radioactive noble gas monitors | |
| Equipment for continuous monitoring of radioactivity in gaseous effluents Part 4: Specific requirements for radioactive iodine monitors | |
| Equipment for continuous monitoring of radioactivity in gaseous effluents Part 5: Specific requirements for tritium monitors | |
| Equipment for monitoring of radionuclides in liquid effluents and surface waters | |
| Estimation of the Reliability of Electrical Connectors | |
| Evaluation and Routine Testing in Medical Imaging Departments - Part 2-10: Constancy Tests - X-ray Equipment for Mammography | |
| Evaluation and routine testing in medical imaging departments - Part 2-11: Constancy tests - Equipment for general direct radiography | |
| Evaluation and routine testing in medical imaging departments - Part 2-7: Constancy tests - Equipment for intra-oral dental radiography excluding dental panoramic equipment | |
| Evaluation and routine testing in medical imaging departments - Part 2-9: Constancy tests - Equipment for indirect radioscopy and indirect radiography | |
| Fibre optic fan-outs - Part 1-1: Blank detail specification - Environmental categories 1, 2, 3, 5 and 99 | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-21: Examinations and Measurements - Switching Time | |
| Fibre optic interconnecting devices and passive components \x97 Performance standard Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C \x97 Indoor controlled environment | |
| Fibre optic interconnecting devices and passive components Interface standard for fibre management systems Part 1: General and guidance | |
| Fibre Optics - Parameters of Amplifier Components | |
| Fuel cell technologies Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes,... | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements | |
| Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety Related Systems - Part 5: Examples of Methods for the Determination of Safety Integrity Levels | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety-Related Systems - Part 1: General Requirements | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety-Related Systems - Part 2: Requirements for Electrical/Electroni c/Programmable Electronic Safety-Related Systems | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety-Related Systems - Part 3: Software Requirements | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety-Related Systems - Part 4: Definitions and Abbreviations | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety-Related Systems - Part 6: Guidelines on the Application of IEC 61508-2 and IEC 61508-3 | |
| Functional Safety of Electrical/Electroni c/Programmable Electronic Safety-Related Systems - Part 7: Overview of Techniques and Measures | |
| Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of BS IEC 61511-1 | |
| General safety requirements for residual current operated protected devices Part 1: Residual current operated protective devices for DC systems | |
| Generic cabling systems \x97 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7 \x97 Blank detail specification... | |
| Generic cabling systems \x97 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A \x97 Blank detail specification... | |
| Generic cabling systems \x97 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-25: Work area with M12 4 poles connectors \x97 Blank detail specification... | |
| Global maritime distress and safety system (GMDSS) Part 2: COSPAS-SARSAT EPIRB Satellite emergency position indicating radio beacon operating on 406 MHz Operational and performance requirements, methods of testing and required... | |
| Global maritime distress and safety system (GMDSS) Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required... | |
| Global maritime distress and safety system (GMDSS) Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, test methods and required test results | |
| Global maritime distress and safety system (GMDSS) Part 9: Shipborne transmitters and receivers for use in the MF and HF bands suitable for telephony, digital selective calling (DSC) and reception... | |
| Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals | |
| Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment | |
| Harmonized system of quality assessment for electric components Varistors for use in electronic equipment - Sectional specification for surge suppression varistors | |
| Harmonized System of Quality Assessment for Electronic Components Semiconductor Devices - Sectional Specification for Semiconductor Integrated Circuits Excluding Hybrid Circuits | |
| Hazard and Operability Studies (HAZOP Studies) - Application Guide | |
| High-voltage switchgear and controlgear Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 1: General and Annexes | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 3: Guidelines for Technical Specifications for Pelton Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 4: Guidelines for Technical Specifications for Kaplan and Propeller Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 5: Guidelines for Technical Specifications for Tubular Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 6: Guidelines for Technical Specifications for Pump-Turbines | |
| Hydraulic Turbines, Storage Pumps and Pump-Turbines - Tendering Documents - Part 7: Guidelines for Technical Specifications for Storage Pumps | |
| Hydraulic Turbines, Storage Pumps, and Pump Turbines - Tendering Documents - Part 2: Guidelines for Technical Specifications for Francis Turbines | |
| IEEE standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML | |
| Industrial communication networks - Network and system security Part 2-1: Establishing an industrial automation and control system security program | |
| Industrial communication networks \x97 Network and system security Part 3-3: System security requirements and security levels | |
| Insulators for overhead lines with a nominal voltage above 1 OOOV - AC power arc tests on insulator sets | |
| IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows | |
| Liquid Crystal and Solid State Display Devices - Part 3: Sectional Specification for Liquid Crystal Display (LCD) Cells | |
| Liquid Crystal and Solid-State Display Devices - Part 1: Generic Specification | |
| Liquid Crystal and Solid-State Display Devices - Part 2.1: Passive Matrix Monochrome LCD Modules - Blank Detail Specification | |
| Liquid Crystal and Solid-State Display Devices - Part 3-1: Liquid Crystal Display (LCD) Cells - Blank Detail Specification | |
| Liquid crystal display devices Part 30-3: Measuring methods for liquid crystal display modules - Motion artefact measurement of active matrix liquid crystal display modules | |
| Liquid crystal display devices Part 30-5: Optical measuring methods of transmissive transparent LCD modules | |
| Liquid crystal display devices Part 40-1: Mechanical testing of display cover glass for mobile devices - Guidelines | |
| Liquid crystal display devices Part 40-2: Mechanical testing of display cover glass for mobile devices \x97 Uniaxial flexural strength (4-point bend) | |
| Liquid crystal display devices Part 40-3: Mechanical testing of display cover glass for mobile devices \x97 Biaxial flexural energy to failure (ball drop) | |
| Liquid crystal display devices Part 40-4: Mechanical testing of display cover glass for mobile devices \x97 Biaxial flexural strength (ring-on-ring) | |
| Liquid crystal display devices Part 40-5: Mechanical testing of display cover glass for mobile devices \x97 Strength against dynamic impact by a sharp object with the specimen rigidly supported | |
| Liquid crystal display devices Part 40-6: Mechanical testing of display cover glass for mobile devices - Retained biaxial flexural strength (abraded ring-on-ring) | |
| Live working - Gloves and mitts with mechanical protection | |
| Low-voltage surge protective devices Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations - Selection and application principles | |
| Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) Part 1: Carrier-sense time division multiple access (CSTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 6: Navigation with Indian constellation (NavIC)/Indian regional navigation satellite system (IRNSS) - Receiver equipment - Performance... | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security | |
| Maritime navigation and radiocommunication equipment and systems \x97 Global navigation satellite systems (GNSS) Part 7: Satellite based augmentation system (SBAS) L1 \x97 Receiver equipment \x97 Performance standards, methods of testing... | |
| Matting of insulating material for electrical purposes | |
| Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure | |
| Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Part 2: Basic standard for measurements | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging | |
| Metal thermowells for thermometer sensors - Functional dimension | |
| Metallic cables and other passive components - Test methods Part 4-17: Electromagnetic compatibility (EMC) - Reduction Factor | |
| Metallic cables and other passive components \x97 Test methods Part 4-8: Electromagnetic compatibility (EMC) \x97 Capacitive coupling admittance | |
| Metallic cables and other passive components test methods Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - Line injection method | |
| Metallic Communicati on Cable test methods Part 4-15: Electromagnetic compatibility (EMC) \x97 Test method for measuring transfer impedance and screening attenuation \x97 or coupling attenuation with triaxial cell | |
| Metallic communication cable test methods Part 4-10: Electromagnetic compatibility (EMC) \x97 Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets \x97 Double coaxial test method | |
| Metallic communication cable test methods Part 4-16: Electromagnetic compatibility (EMC) \x97 Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements... | |
| Metallic communication cable test methods Part 4-3: Electromagnetic compatibility (EMC) \x97 Surface transfer impedance \x97 Triaxial method | |
| Metallic communication cable test methods Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance - Triaxial method | |
| Metallic communication cable test methods Part 4-9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method | |
| Metallic communication cable test methods Part 4-9: Electromagnetic compatibility (EMC) related test method for measuring coupling attenuation of screened balanced cables - Triaxial method | |
| Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions | |
| Mobile and fixed offshore units - Electrical installations - Part 2: System design | |
| Mobile and Fixed Offshore Units - Electrical Installations - Part 3: Equipment | |
| Mobile and Fixed Offshore Units - Electrical Installations - Part 5: Mobile Units | |
| Mobile and Fixed Offshore Units - Electrical Installations - Part 6: Installation | |
| Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas | |
| Mobile and fixed offshore units \x96 Electrical installations Part 4: Cables | |
| Multicore and symmetrical pair/quad cables for digital communications Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering | |
| Multicore and symmetrical pair/quad cables for digital communications Part 10: Cables for cords with transmission characteristics up to 2 GHz - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz - Horizontal floor wiring - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz \x96 Horizontal floor wiring \x96 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 12: Symmetrical single pair cables with transmission characteristics up to 600 MHz \x97 Work area wiring \x97 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 13: Symmetrical single pair cables with transmission characteristics up to 20 MHz - Horizontal floor wiring - Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 14: Symmetrical single pair cables with transmission characteristics up to 20 MHz \x97 Work area wiring \x97 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 15: Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire performance... | |
| Multicore and symmetrical pair/quad cables for digital communications Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x97 Sectional specification for digital and analogue communication cables... | |
| Multicore and symmetrical pair/quad cables for digital communications Part 8: Symmetrical pair cables with transmission characteristics up to 1 200 MHz \x97 Work area wiring \x97 Sectional specification | |
| Multicore and symmetrical pair/quad cables for digital communications Part 9: Cables for channels with transmission characteristics up to 2 GHz - Sectional specification | |
| Multimedia gateway in home networks - Guidelines | |
| Multimedia systems and equipment - Colour measurement and management Part 12-1: Metadata for identification of colour gamut (Gamut ID) | |
| Multimedia systems and equipment - Multimedia E-Publishing and E-Books - Generic format for E-Publishing | |
| Multimedia systems and equipment \x97 Colour measurement and management Part 12-2: Simple metadata format for identification of colour gamut | |
| Nuclear facilities \x97 Instrumentation and control systems \x97 Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use during normal operation and anticipated operational... | |
| Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution | |
| Nuclear instrumentation - Measurement of activity or emission rate of gamma-ray emitting radionuclides - Calibration and use of germanium-based spectrometers | |
| Nuclear Instrumentation - Sample Containers for Gamma-Ray Spectrometry with Ge-Detectors | |
| Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods | |
| Nuclear instrumentation \x97 High-purity germanium crystals for radiation detectors \x97 Measurement methods of basic characteristics | |
| Nuclear power plants - Control rooms - Application of visual display units (VDUs) | |
| Nuclear Power Plants - Control rooms - Design | |
| Nuclear power plants - Control rooms - Operator controls | |
| Nuclear power plants - Control rooms - Supplementary control points for reactor shutdown without access to the main control room | |
| Nuclear Power Plants - Design of Control Rooms - Functional Analysis and Assignment | |
| Nuclear power plants - Electrical equipment of the safety system - Qualification | |
| Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation | |
| Nuclear Power Plants - In-Core Instrumentation - Characteristics and Test Methods of Self-Powered Neutron Detectors | |
| Nuclear Power Plants - Instrumentation and Control for Systems Important to Safety - General Requirements for Systems | |
| Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions | |
| Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions | |
| Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits Part 2: HDL-programmed integrated circuits for systems performing category B or C functions | |
| Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems | |
| Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems | |
| Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety system instrument channels | |
| Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing | |
| Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors | |
| Nuclear power plants - Instrumentation and control systems important to safety - Classification of instrumentation and control functions | |
| Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing | |
| Nuclear Power Plants - Instrumentation and Control Systems Important to Safety - Plant-Wide Radiation Monitoring | |
| Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF) | |
| Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies | |
| Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection of loose parts: Characteristics, design criteria and operational procedures | |
| Nuclear power plants - Instrumentation important to safety - Containment monitoring for early detection of developing deviations from normal operation in light water reactors | |
| Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints | |
| Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions | |
| Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 1: General requirements | |
| Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and... | |
| Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 3: Equipment for continuous high range area gamma monitoring | |
| Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process... | |
| Nuclear power plants - Instrumentation systems - Measurements for monitoring adequate cooling within the core of pressurized light water reactors | |
| Nuclear power plants - Instrumentation systems important to safety - Electrical penetration assemblies in containment structures | |
| Nuclear power plants - Main control room - Alarm functions and presentation | |
| Nuclear power plants Instrumentation and control important for safety Software aspects for computer-based systems performing category B or C functions | |
| Nuclear reactor instrumentation - Boiling water reactors (BWR) - Stability monitoring | |
| Nuclear reactor instrumentation - Pressurized light water reactors (PWR) - Monitoring adequate cooling within the core during cold shutdown | |
| Nuclear Reactor Instrumentation - Pressurized Water Reactor (PWR) of VVER Design - Monitoring Adequate Cooling within the Core During Cold Shutdown | |
| Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method | |
| On-Line Analyser Systems - Guide to Design and Installation | |
| Optical fibres - Part 2: Product specifications | |
| Organic light emitting diode (OLED) display Part 6-7: Measuring methods of optical characteristics for display with under-screen feature | |
| Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications | |
| Organic light emitting diode (OLED) displays Part 6-1: Measuring methods of optical and electro-optical parameters | |
| Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance | |
| Organic light emitting diode (OLED) displays Part 6-4: Measuring methods of transparent properties | |
| Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation | |
| Overhead transmission lines \x97 Design criteria | |
| Photovoltaic (PV) arrays \x97 Design requirements | |
| Photovoltaic (PV) arrays Part 1: Design requirements | |
| Plasma display panels Part 2-6: Measuring methods \x97 APL dependent gamma and colour characteristics | |
| Plasma display panels Part 4-1: Environmental testing methods \x97 Climatic and mechanical | |
| Plasma display panels Part 4-2: Environmental testing methods \x97 Panel strength | |
| Portable residual current devices (PRCDs) without integral overcurrent protection for household and similar use | |
| Power law model - Goodness-of-fit tests and estimation methods | |
| Precision clock synchronization protocol for networked measurement and control systems | |
| Printed board assembly products - Manufacturing description data and transfer methodology - Part 2: Generic requirements | |
| Procedures for Ensuring the Cleanliness of Industrial-Process Measurement and Control Equipment in Oxygen Service | |
| Procedures for Goodness-of-Fit Tests, Confidence Intervals and Lower Confidence Limits for Weibull Distributed Data | |
| Process management for avionics - Atmospheric radiation effects Part 1: Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment | |
| Process management for avionics - Atmospheric radiation effects Part 2: Guidelines for single event effects testing for avionics systems | |
| Process management for avionics - Atmospheric radiation effects Part 3: System design optimization to accommodate the single event effects (SEE) of atmospheric radiation | |
| Process management for avionics \x97 Atmospheric radiation effects Part 4: Design of high voltage aircraft electronics managing potential single event effects | |
| Process management for avionics \x97 Atmospheric radiation effects Part 5: Assessment of thermal neutron fluxes and single event effects in avionics systems | |
| Project risk management - Application guidelines | |
| Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs | |
| Radiation protection instrumentation - Alarming personal radiation devices (PRD) for detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Cargo/vehicle radiographic inspection system | |
| Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material | |
| Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material | |
| Radiation Protection Instrumentation - Installed, Portable or Transportable Assemblies - Measurement of Air Kerma Direction and Air Kerma Rate | |
| Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations - Direct reading personal dose equivalent and/or dose equivalent rate dosemeters | |
| Radiation protection instrumentation - Portable photon contamination meters and monitors | |
| Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) | |
| Radiation protection instrumentation - Spectroscopy-based portal monitors used for the de-tection and identification of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - X-ray systems for the screening of persons for security and the carrying of illicit items | |
| Radiation protection instrumentation \x96 Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV | |
| Radiation protection instrumentation \x97 Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Part 2: High range beta and photon dose and dose rate... | |
| Radiation protection instrumentation \x97 Measurement of discrete radionuclides in the environment \x97 In situ photon spectrometry system using a germanium detector | |
| Radiation protection instrumentation \x97 Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring | |
| Radiation protection instrumentation \x97 Warning equipment for criticality accidents | |
| Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements | |
| Radiation protection instrumentation Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders | |
| Radiation protection instrumentation Radon and radon decay product measuring instruments Part 1: General principles | |
| Radiation protection instrumentation Radon and radon decay product measuring instruments Part 2: Specific requirements for radon measuring instruments | |
| Radiation protection instrumentation Radon and radon decay product measuring instruments Part 3: Specific requirements for radon decay product measuring instruments | |
| Radio data system (RDS) \x96 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 10: UECP \x96 Universal Encoder Communication Protocol | |
| Radio data system (RDS) \x96VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 9: RBDS \x97 RDS variant used in North America | |
| Radio data system (RDS) \x97 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 1: Modulation characteristics and baseband coding | |
| Radio data system (RDS) \x97 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 2: Message format: Coding and definitions of RDS features | |
| Radio data system (RDS) \x97 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 3: Usage and registration of Open Data Applications (ODAs) | |
| Radio data system (RDS) \x97 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 4: Registered code tables | |
| Radio data system (RDS) \x97 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 5: Marking of RDS receiver devices | |
| Radio data system (RDS) \x97 VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz Part 6: Compilation of technical specifications for Open Data Applications in the... | |
| Reed contact units - Part 2: Heavy-duty reed switches | |
| Reliability stress screening - Part 2: Electronic components | |
| Reliability testing. Compliance tests for constant failure rate and constant failure intensity | |
| Safety measurements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-020. Particular requirements for laboratory centrifuges | |
| Safety of Laser Products - Part 6: Safety of Laser Products with Optical Sources, Exclusively Used for Visible Information Transmission to the Human Eye | |
| Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment | |
| Safety of Machinery - Electro-Sensitive Protective Equipment - Part 2: Particular Requirements for Equipment Using Active Opto-Electronic Protective Devices (AOPDs) | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-010: Conformity Verification Report for the IEC 61010-2-010, Particular Requirements for Laboratory Equipment for the Heating of... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-020: Conformity Verification Report for IEC 61010-2-020: 1992, Particular Requirements for Laboratory Centrifuges | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051, Particular Requirements for Laboratory Equipment for Mixing and Stirring | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-061: Conformity Verification Report for IEC 61010-2-061, Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and... | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3.1: Conformity Verification Report for IEC 61010-1 | |
| Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 3: Protocol for the Preparation of Conformity Verification Reports for the IEC 61010 Series | |
| Semiconductor devices - Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) Part 1: Fast BTI test for MOSFET | |
| Semiconductor Devices - Discrete Devices - Part 4-1: Microwave Diodes and Transistors - Microwave Field Effect Transistors - Blank Detail Specification | |
| Semiconductor Devices - Discrete Devices - Part 4-2: Microwave Diodes and Transistors - Integrated-Circuit Microwave Amplifiers - Blank Detail Specifications | |
| Semiconductor devices - Discrete devices - Part 4: Microwave diodes and transistors | |
| Semiconductor Devices - Discrete Devices and Integrated Circuits - Part 2: Rectifier Diodes | |
| Semiconductor devices - Discrete devices Part 14-4: Semiconductor accelerometers | |
| Semiconductor devices - Discrete devices Part 4: Microwave diodes and transistors | |
| Semiconductor devices - Discrete devices Part 8: Field-effect transistors | |
| Semiconductor Devices - Integrated Circuits - Part 2-11: Digital Integrated Circuits - Blank Detail Specification for Single Supply Integrated Circuit, Electrically Erasable, and Programmable Read-Only Memory | |
| Semiconductor Devices - Integrated Circuits - Part 2-12: Digital Integrated Circuits - Blank Detail Specification for Programmable Logic Devices (PLDs) | |
| Semiconductor devices - Integrated circuits - Part 2-20: Digital integrated circuits - Family specification - Low voltage integrated circuits | |
| Semiconductor Devices - Integrated Circuits - Part 23-1: Hybrid Integrated Circuits and Film Structures - Manufacturing Line Certification - Generic Specification | |
| Semiconductor Devices - Integrated Circuits - Part 23-2: Hybrid Integrated Circuits and Film Structures - Manufacturing Line Certification - Internal Visual Inspection and Special Tests | |
| Semiconductor Devices - Integrated Circuits - Part 23-3: Hybrid Integrated Circuits and Film Structures - Manufacturing Line Certification - Manufacturers' Self-Audit Checklist and Report | |
| Semiconductor Devices - Integrated Circuits - Part 23-4: Hybrid Integrated Circuits and Film Structures - Manufacturing Line Certification - Blank Detail Specification | |
| Semiconductor devices - Integrated circuits - Part 4-3: Interface integrated circuits - Dynamic criteria for analogue-digital converters (ADC) | |
| Semiconductor devices - Integrated circuits Part 2. Digital integrated circuits | |
| Semiconductor Devices - Integrated Circuits Part 4: Interface Integrated Circuits | |
| Semiconductor Devices - Integrated Circuits Part 5: Semicustom Integrated Circuits | |
| Semiconductor devices - Micro electromechanical devices Part 40: Test methods of micro-electromechani cal inertial shock switch threshold | |
| Semiconductor devices - Micro-electromechani cal device Part 47: Silicon based MEMS fabrication technology - Measurement method of bending strength of microstructures | |
| Semiconductor devices - Micro-electromechani cal devices - Part 53: MEMS electrothermal transfer device | |
| Semiconductor devices - Micro-electromechani cal devices Part 28: Performance testing method of vibrationdriven MEMS electret energy harvesting devices | |
| Semiconductor devices - Micro-electromechani cal devices Part 29: Electromechanical relaxation test method for freestanding conductive thin films under room temperature | |
| Semiconductor devices - Micro-electromechani cal devices Part 30: Measurement methods of electro-mechanical conversion characteristics of MEMS piezoelectric thin film | |
| Semiconductor devices - Micro-electromechani cal devices Part 35: Test method of electrical characteristics under bending deformation for flexible electromechanical devices | |
| Semiconductor devices - Micro-electromechani cal devices Part 37: Environmental test methods of MEMS piezoelectric thin films for sensor application | |
| Semiconductor devices - Micro-electromechani cal devices Part 38: Test method for adhesion strength of metal powder paste in MEMS interconnection | |
| Semiconductor devices - Micro-electromechani cal devices Part 42: Measurement methods of electro-mechanical conversion characteristics of piezoelectric MEMS cantilever | |
| Semiconductor devices - Micro-electromechani cal devices Part 44: Test methods for dynamic performances of MEMS resonant electric-field-sensi tive devices | |
| Semiconductor devices - Microelectromechanic al devices Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials | |
| Semiconductor Devices - Part 16-2: Microwave Integrated Circuits - Frequency Prescalers | |
| Semiconductor devices - Part 1: General | |
| Semiconductor devices - Part 6: Thyristors | |
| Semiconductor devices - Part 7: Bipolar transistors | |
| Semiconductor devices - Part 8: Field-effect transistors | |
| Semiconductor devices \x96 Discrete devices Part 7: Bipolar transistors | |
| Semiconductor devices \x96 Micro-electromechani cal devices Part 33: MEMS piezoresistive pressure-sensitive device | |
| Semiconductor devices \x96 Micro-electromechani cal devices Part 34: Test methods for MEMS piezoresistive pressure-sensitive device on wafer | |
| Semiconductor devices \x96 Micro-electromechani cal devices Part 36: Environmental and dielectric withstand test methods for MEMS piezoelectric thin films | |
| Semiconductor devices \x96 Microelectromechanic al devices Part 41: RF MEMS circulators and isolators | |
| Semiconductor devices \x97 Micro-electromechani cal devices Part 27: Bond strength test for glass frit bonded structures using micro-chevron-tests (MCT) | |
| Semiconductor devices \x97 Micro-electromechani cal devices Part 32: Test method for the nonlinear vibration of MEMS resonators | |
| Semiconductor devices \x97 Micro-electromechani cal devices Part 43: Test method of electrical characteristics after cyclic bending deformation for flexible micro-electromechani cal devices | |
| Semiconductor devices \x97 Micro-electromechani cal devices Part 46: Silicon based MEMS fabrication technology \x97 Measurement method of tensile strength of nanoscale thickness membrane | |
| Semiconductor devices \x97 Micro-electromechani cal devices Part 48: Test method for determining solution concentration by optical absorption using MEMS fluidic device | |
| Semiconductor devices \x97 Microelectromechanic al devices Part 45: Silicon based MEMS fabrication technology \x97 Measurement method of impact resistance of nanostructures | |
| Semiconductor devices Discrete devices Part 5-4: Optoelectronic devices Semiconductor lasers | |
| Semiconductor devices Discrete devices Part 7-5: Bipolar transistors for power switching applications | |
| Semiconductor Devices Integrated Circuits Part 1: General | |
| Semiconductor devices Integrated circuits Part 23-5: Hybrid integrated circuits and film structures Manufacturing line certification Procedure for qualification approval | |
| Semiconductor devices Part 14-5: Semiconductor sensors PN-junction semiconductor temperature sensor | |
| Semiconductor devices Part 18-1: Semiconductor bio sensors \x97 Test method and data analysis for calibration of lens-free CMOS photonic array sensors | |
| Semiconductor devices Part 18-2: Semiconductor bio sensors - Evaluation process of lens-free CMOS photonic array sensor package modules | |
| Semiconductor devices Part 18-3: Semiconductor bio sensors - Fluid flow characteristics of lens-free CMOS photonic array sensor package modules with fluidic system | |
| Semiconductor devices Part 18-4: Semiconductor bio sensors \x97 Evaluation method of noise characteristics of lens-free CMOS photonic array sensors | |
| Semiconductor devices Part 18-5: Semiconductor bio sensors - Evaluation method for light responsivity characteristics of lens-free CMOS photonic array sensor package modules by incident angle of light | |
| Semiconductor devices Part 19-1: Smart sensors \x96 Control scheme of smart sensors | |
| Semiconductor devices Part 3: Discrete devices: Signal, switching and regulator diodes | |
| Semiconductor devices Part 5-10: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of the internal quantum efficiency based on the room-temperature reference point | |
| Semiconductor devices Part 5-11: Optoelectronic devices \x97 Light emitting diodes \x97 Test method of radiative and nonradiative currents of light emitting diodes | |
| Semiconductor devices Part 5-13: Optoelectronic devices \x96 Hydrogen sulphide corrosion test for LED packages | |
| Semiconductor devices Part 5-14: Optoelectronic devices - Light emitting diodes - Test method of the surface temperature based on the thermoreflectance method | |
| Semiconductor devices Part 5-15: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage based on the electroreflectance spectroscopy | |
| Semiconductor devices Part 5-16: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage of GaN-based light emitting diodes based on the photocurrent spectroscopy | |
| Semiconductor devices Part 5-4: Optoelectronic devices - Semiconductor lasers | |
| Semiconductor devices Part 5-8: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of optoelectronic efficiencies of light emitting diodes | |
| Semiconductor devices Part 5-9: Optoelectronic devices \x97 Light emitting diodes \x97 Test method of the internal quantum efficiency based on the temperature-dependen t electroluminescence | |
| Service diagnostic interface for consumer electronics products and networks \x97 Implementation for echonet | |
| Software Dependability Through the Software Life-Cycle Processes - Application Guide | |
| Software for Computers Important to Safety for Nuclear Power Plants - Part 2: Software Aspects of Defense Against Common Cause Failures, Use of Software Tools and of Pre-Developed Software | |
| Software for Computers in the Safety Systems of Nuclear Power Stations | |
| Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements | |
| Software interface for maintenance information collection and analysis (SIMICA): Exchanging test results and session information via the extensible markup language (XML) | |
| Software Interface for Maintenance Information Collection and Analysis (SIMICA) | |
| Specification for the testing of balanced and coaxial information technology cabling Part 1-1: Additional requirements for the measurement of transverse conversion loss and equal level transverse conversion transfer loss | |
| Specification for the testing of balanced and coaxial information technology cabling Part 1-2: Installed balanced cabling as specified in ISO/IEC 11801 \x97 Additional requirements for measurement of resistance unbalance with... | |
| Specification for the testing of balanced and coaxial information technology cabling Part 2-21: Category 6 cords as specified in ISO/ IEC 11801-1 \x97 Blank detail specification | |
| Specification for the testing of balanced and coaxial information technology cabling Part 2-22: Category 6A cords as specified in ISO/IEC 11801-1 \x97 Blank detail specification | |
| Standard data element types with associated classification scheme Part 7: Data dictionary of cross-domain concepts | |
| Standard for automatic test markup language (ATML) instrument description | |
| Standard for automatic test markup language (ATML) test adapter description | |
| Standard for automatic test markup language (ATML) test configuration | |
| Standard for automatic test markup language (ATML) test station description | |
| Standard for Extensions to Standard Test Interface Language (STIL) for DC Level Specification | |
| Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments | |
| Standard for Property Specification Language (PSL) | |
| Standard for Signal and Test Definition | |
| Standard for SystemVerilog - Unified Hardware Design, Specification, and Verification Language | |
| Standard Test Interface Language (STIL) for Digital Test Vector Data | |
| Standard Testability Method for Embedded Core-based Integrated Circuits | |
| Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 1: Interface standards for systems using dedicated interconnections | |
| Surface Mounting Technology - Discrete Devices - Part 9: Insulated-Gate Bipolar Transistors (IGBTs) | |
| SystemVerilog Part 2: Universal Verification Methodology Language Reference Manual | |
| Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards | |
| Telecontrol Equipment and Systems Part 1: General Considerations Section 3: Glossary | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 2-804: Test methods for time to delamination \x97 T260, T288, T300 | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-801: Thermal conductivity test for base materials | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-2: General test methods for materials and assemblies \x97 Soldering flux for printed board assemblies | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-3: General test methods for materials and assemblies \x97 Soldering paste for printed board assemblies | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-4: General test methods for materials and assemblies \x97 Solder alloys and fluxed and non-fluxed solid... | |
| Tracked Changes (Redline) - Coaxial communication cables - Part 1-119: Electrical test methods - RF power for coaxial cables and cable assemblies | |
| Tracked Changes (Redline) - Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables | |
| Tracked Changes (Redline) - Coaxial communication cables - Part 9-1: Blank detail specification for flexible RF coaxial cables | |
| Tracked Changes (Redline) - Coaxial communication cables \x97 Part 9: Sectional specification for flexible RF coaxial cables | |
| Tracked Changes (Redline) - Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 11: MPEG-4 AAC and its extensions and MPEG-D USAC in LATM/LOAS... | |
| Tracked Changes (Redline) - Electricity metering - Payment systems Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) \x97 Part 5-6: Installation and mitigation guidelines \x97 Mitigation of external EM influences | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems | |
| Tracked Changes (Redline) - Environmental considerations specific to insulated electrical power and control cables | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems Part 1: General and guidance | |
| Tracked Changes (Redline) - Liquid crystal display devices Part 40-1: Mechanical testing of display cover glass for mobile devices \x96 Guidelines | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems \x97 Digital interfaces \x97 Part 460: Multiple talkers and multiple listeners \x97 Ethernet interconnection \x97 Safety and security | |
| Tracked Changes (Redline) - Mobile and fixed offshore units - Electrical installations Part 1: General requirements and conditions | |
| Tracked Changes (Redline) - Mobile and fixed offshore units - Electrical installations Part 2: System design | |
| Tracked Changes (Redline) - Mobile and fixed offshore units - Electrical installations Part 3: Equipment | |
| Tracked Changes (Redline) - Mobile and fixed offshore units - Electrical installations Part 6: Installation | |
| Tracked Changes (Redline) - Mobile and fixed offshore units - Electrical installations Part 7: Hazardous areas | |
| Tracked Changes (Redline) - Mobile and fixed offshore units \x97 Electrical installations Part 5: Mobile units | |
| Tracked Changes (Redline) - Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz - Horizontal floor wiring... | |
| Tracked Changes (Redline) - Multicore and symmetrical pair/quad cables for digital communications \x97 Part 12: Symmetrical single pair cables with transmission characteristics up to 1,25 GHz \x97 Work area wiring... | |
| Tracked Changes (Redline) - Multicore and symmetrical pair/quad cables for digital communications Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering | |
| Tracked Changes (Redline) - Multimedia gateway in home networks - Guidelines | |
| Tracked Changes (Redline) - Multimedia systems and equipment - Colour measurement and management - Part 12-2: Simple metadata format for identification of colour gamut | |
| Tracked Changes (Redline) - Nuclear facilities - Instrumentation systems important to safety - Radiation monitoring for accident and post-accident conditions - Part 1: General requirements | |
| Tracked Changes (Redline) - Nuclear facilities - Instrumentation systems important to safety - Radiation monitoring for accident and post-accident conditions - Part 3: Equipment for continuous high range area gamma... | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumention, control and electrical power systems - Requirements for electromagnetic compatibility testing | |
| Tracked Changes (Redline) - Nuclear power plants \x97 Instrumentation, control and electrical power systems \x97 Requirements for static uninterruptible DC and AC power supply systems | |
| Tracked Changes (Redline) - Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters | |
| Tracked Changes (Redline) - Photovoltaic (PV) arrays - Design requirements | |
| Tracked Changes (Redline) - Photovoltaic (PV) arrays - Part 1: Design requirements | |
| Tracked Changes (Redline) - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems | |
| Tracked Changes (Redline) - Process management for avionics - Atmospheric radiation effects Part 2: Guidelines for single event effects testing for avionics systems | |
| Tracked Changes (Redline) - Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 6: Compilation of technical specifications for... | |
| Tracked Changes (Redline) - Semiconductor devices - Optoelectronic devices. Semiconductor lasers | |
| Tracked Changes (Redline) - Semiconductor devices - Part 2: Discrete devices - Rectifier diodes | |
| Tracked Changes (Redline) - Semiconductor devices - Part 6: Discrete devices - Thyristors | |
| Tracked Changes (Redline) - Wind energy generation systems - Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry | |
| Verilog\xae register transfer level synthesis | |
| VHDL Register Transfer Level (RTL) synthesis | |
| Wind energy generation systems Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry | |
| Wind energy generation systems Part 29: Marking and lighting of wind turbines |
| << Prev | Next >> |