Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
320
330
340
350
360
370
380
381
382
383
384
385
386
387
388
389
390
391
392
400
410
420
430
440
450
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| 2014Cardiovascular implantsand extracorporeal systems\x97 Extracorporeal bloodcircuit for haemodialysers,haemo diafilters andhaemofilters | |
| Acoustics - Determination of airflow resistance Part 1: Static airflow method | |
| Acoustics - Determination of airflow resistance Part 2: Alternating airflow method | |
| Adhesives - Peel test for a flexible-bonded-to-r igid test specimen assembly Part 2: 180 degree peel | |
| Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints | |
| Air quality Definition and determination of performance characteristics of an automatic measuring system | |
| Aluminium caps for transfusion, infusion and injection bottles General requirements and test methods | |
| Analysis of Surface Active Agents (Raw Materials) - Ethoxylated Alcohol and Alkylphenol Sulfates - Method for Determination of Unsulfated Matter Content | |
| Animal and Vegetable Fats and Oils - Determination of Polar Compounds Content | |
| Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) | |
| Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method | |
| Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method | |
| Aromatic natural raw materials \x97 Vocabulary | |
| Awnings for leisure accommodation vehicles - Requirements and test methods | |
| Binders for Paints and Varnishes - Determination of Free-Formaldehyde Content of Amino Resins - Sodium Sulfite Titrimetric Method | |
| BS EN ISO 9001:2015, BS EN ISO 9000:2015, PD ISO/TS 9002 Online - Bulk Licence | |
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature | |
| Building construction - Jointing products Part 1: Determination of extrudability of sealants | |
| Building construction - Jointing products Part 2: Determination of extrudability of sealants using standardized apparatus | |
| Building Construction - Sealants - Determination of Adhesion/Cohesion Properties at Variable Temperatures | |
| Building construction - Sealants - Determination of tensile properties (Extension to break) | |
| Building construction - Sealants Determination of tensile properties at maintained extension | |
| Cardiovascular implants and extracorporeal systems \x97 Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators | |
| Cellular Plastics and Rubbers - Determination of Apparent (Bulk) Density | |
| Cellular Plastics, Rigid - Test Methods for Self-Skinned High-Density Materials | |
| Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind | |
| Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese | |
| Construction Drawings - Representation of Modular Sizes, Lines and Grids | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories | |
| Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres | |
| Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens | |
| Corrosion tests in artificial atmospheres \x97 Salt spray tests | |
| Corrosion tests in artificial atmospheres Salt spray tests | |
| Crude petroleum - Determination of water - Distillation method | |
| Dental Casting Alloys with Noble Metal Content of at Least 25% but Less than 75% | |
| Dental extraction forceps - Part 1: Screw and pin joint types | |
| Dentistry - Extraction forceps Part 2: Designation | |
| Dentistry - Hose connectors for air driven dental handpieces | |
| Dentistry \x97 Extraction forceps Part 3: Design | |
| Destructive tests on welds in metallic materials - Hardness testing Part 1: Hardness test on arc welded joints | |
| Destructive tests on welds in metallic materials - Hardness testing Part 2: Microhardness testing of welded joints | |
| Destructive tests on welds in metallic materials \x97 Fracture test | |
| Destructive tests on welds in metallic materials Impact tests - Test specimen location, notch orientation and examination | |
| Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints | |
| Elastomeric Parts for Aqueous Parenteral Preparations | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2: Identification and characterization | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use Part 1: Extractables in aqueous autoclavates | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use Part 3: Determination of released-particle count | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use Part 5: Functional requirements and testing | |
| Elastomeric parts for parenterals and for devices for pharmaceuticals use Part 3: Determination of released-particle count | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 10: Dialogue Principles | |
| Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 1: General Introduction | |
| Ergonomics of human-system interaction Part 110: Dialogue principles | |
| Ergonomics of human-system interaction Part 112: Principles for the presentation of information | |
| Ergonomics of the thermal environment - Determination of metabolic rate | |
| Extracorporeal systems for blood purification Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators | |
| Extracorporeal systems for blood purification Part 2: Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters | |
| Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths | |
| Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel Part 3: Flat washers with specified property classes | |
| Financial Transaction Card Originated Messages - Interchange Message Specifications - Part 2: Application and Registration Procedures for Institution Identification Codes (IIC) | |
| Financial Transaction Card Originated Messages - Interchange Message Specifications - Part 3: Maintenance Procedures for Codes | |
| Financial Transaction Card Originated Messages - Interchange Message Specifications | |
| Gas tightness of equipment for gas welding and allied processes | |
| Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests | |
| Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and Parameters | |
| Glass containers - Vacuum lug finishes - Part 10: 77 regular | |
| Glass containers - Vacuum lug finishes - Part 11: 82 regular | |
| Glass containers - Vacuum lug finishes - Part 12: 89 regular | |
| Glass containers - Vacuum lug finishes - Part 13: 100 regular | |
| Glass containers - Vacuum lug finishes - Part 14: 110 regular | |
| Glass containers - Vacuum lug finishes - Part 1: General | |
| Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular | |
| Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular | |
| Glass containers - Vacuum lug finishes - Part 7: 58 deep | |
| Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular | |
| Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep | |
| Glass containers Vacuum lug finishes Part 2: 33 medium | |
| Glass containers Vacuum lug finishes Part 3: 38 regular | |
| Glass containers Vacuum lug finishes Part 4: 38 medium | |
| Glossary of Terms for surface active agents | |
| Grooved pins - Full-length parallel grooved, with chamfer | |
| Grooved pins - Full-length parallel grooved, with pilot | |
| Grooved pins - Full-length taper grooved | |
| Grooved pins - Half-length centre grooved | |
| Grooved pins - Half-length reverse-taper grooved | |
| Grooved pins - Half-length taper grooved | |
| Grooved pins - One-third-length centre grooved | |
| Grooved pins with countersunk head | |
| Grooved pins with round head | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 13 : Die Grinders | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle Part 12: Saws and Files with Reciprocating Action and Saws with Rotating or Oscillating Action | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle Part 4 : Grinding Machines | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle Part 6: Impact Drills | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle Part 7 : Wrenches, Screwdrivers and Nut Runners with Impact, Impulse or Ratchet Action | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle Part 8: Polishers and Rotary, Orbital and Random Orbital Sanders | |
| Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle Part 9: Rammers | |
| Hand-Held Portable Tools - Measurement of Vibrations at the Handle Part 14: Stone-Working Tools and Needle Scalers | |
| Hexagon head bolts with metric fine pitch thread - Product grades A and B | |
| Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B | |
| Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and B | |
| Hexagon Nuts, Style 2, with Metric Fine Pitch Thread - Product Grades A and B | |
| Hexagon Thin Nuts (Chamfered) with Metric Fine Pitch Thread - Product Grades A and B | |
| Household Refrigerating Appliances - Refrigerators, Refrigerator-Freezer s, Frozen Food Storage Cabinets and Food Freezers Cooled by Forced Air Circulation - Characteristics and Test Methods | |
| Infusion Equipment for Medical Use - Part 1: Infusion Glass Bottles | |
| Infusion Equipment for Medical Use - Part 2: Closures for Infusion Bottles | |
| Infusion Equipment for Medical Use - Part 3: Aluminium Caps for Infusion Bottles | |
| Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed | |
| Infusion equipment for medical use Part 10: Accessories for fluid lines for use with pressure infusion equipment | |
| Infusion equipment for medical use Part 11: Infusion filters for use with pressure infusion equipment | |
| Infusion equipment for medical use Part 12: Check valves for single use | |
| Infusion equipment for medical use Part 13: Graduated flow regulators for single use with fluid contact | |
| Infusion equipment for medical use Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact | |
| Infusion equipment for medical use Part 15: Light-protective infusion sets for single use | |
| Infusion equipment for medical use Part 16: Infusion sets for single use with volumetric infusion controllers | |
| Infusion equipment for medical use Part 3: Aluminium caps for infusion bottles | |
| Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed | |
| Infusion equipment for medical use Part 8: Infusion equipment for use with pressure infusion apparatus | |
| Infusion equipment for medical use Part 9: Fluid lines for use with pressure infusion equipment | |
| Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems | |
| Inhalational anaesthesia systems Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems | |
| Inhalational anaesthesia systems Part 4: Anaesthetic vapour delivery devices | |
| Inhalational anaesthesia systems Part 5: Anaesthesia ventilators | |
| Injection containers and accessories Part 1: Injection vials made of glass tubing | |
| Injection containers and accessories Part 2: Closures for injection vials | |
| Injection containers and accessories Part 3: Aluminium caps for injection vials | |
| Injection containers and accessories Part 4: Injection vials made of moulded glass | |
| Injection containers and accessories Part 5: Freeze drying closures for injection vials | |
| Injection containers and accessories Part 6: Caps made of aluminium-plastics combinations for injection vials | |
| Injection containers and accessories Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part | |
| Injection Equipment for Medical Use - Part 1: Ampoules for Injectables | |
| Injection Equipment for Medical Use - Part 2: One-Point-Cut (OPC) Ampoules | |
| Jewellery \x96 Colours of gold alloys \x96 Definition, range of colours and designation | |
| Jewellery \x97 Fineness of precious metal alloys | |
| Knitted fabrics - Types - Vocabulary | |
| Laboratory glassware - Graduated pipettes | |
| Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 1: Open-Top Cans | |
| Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 2: General Use Containers | |
| Light Gauge Metal Containers - Definitions and Determination of Dimensions and Capacities - Part 3: Aerosol Cans | |
| Liquefied petroleum gases - Calculation method for density and vapour pressure | |
| Manipulating Industrial Robots - Vocabulary | |
| Materials and articles in contact with foodstuffs - Cutlery and holloware - Part 5: Specification for sharpness and edge retention test of cutlery | |
| Materials and Articles in Contact with foodstuffs - Cutlery and Table Holloware - Part 6: Lightly Silver Plated Table Holloware Protected by Laquer | |
| Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 7: Requirements for Table Cutlery Made of Silver,Other Precious Metals and Their Alloys | |
| Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 8: Requirements for Silver Table and Decorative Holloware | |
| Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware Part 1: Requirements for Cutlery for the Preparation of Food | |
| Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware Part 2: Requirements for Stainless Steel and Silver-Plated Cutlery | |
| Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware Part 3: Requirements for Silver-Plated Table and Decorative Holloware | |
| Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware Part 4: Requirements for Gold-Plated Cutlery | |
| Materials and articles in contact with foodstuffs \x96 Cutlery and table holloware Part 9: Requirements for ceramic knives | |
| Measurement of radioactivity \x97 Alpha-, beta- and photon emitting radionuclides \x97 Reference measurement standard specifications for the calibration of surface contamination monitors | |
| Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread | |
| Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not under Tensile Stresses | |
| Mechanical properties of fasteners made of carbon steel and alloy steel Part 3: Flat washers with specified property classes | |
| Mechanical Properties of Fasteners Part 6: Nuts with Specified Proof Load Values - Fine Pitch Thread | |
| Medical Electrical Equipment - Oxygen Concentrators for Medical Use - Safety Requirements | |
| Metallic coatings - Coatings anodic to the substrate - Rating of test specimens subjected to corrosion tests | |
| Metallic coatings - Measurement of coating thickness - Scanning electron microscope method | |
| Metallic coatings - Review of methods of measurement of ductility | |
| Metallic materials - Tube Drift-expanding test | |
| Metallic materials - Tube Ring tensile test | |
| Metallic materials - Tube Ring-expanding test | |
| Metallic materials Tube (in full section) Bend test | |
| Metallic materials Tube Flanging test | |
| Metallic materials Tube Flattening test | |
| Metallic Tube Connections for Fluid Power and General Use - Part 1: 24 Degrees Compresseion Fittings | |
| Metallic Tube Connections for Fluid Power and General Use - Part 4: 24 Degree Cone Connectors with O-Ring Weld-on Nipples | |
| Metals and Alloys - Atmospheric Corrosion Testing - General Requirements for Field Tests | |
| Milk - Determination of Nitrogen Content - Part 1: Kjeldahl Method | |
| Milk - Determination of Nitrogen Content - Part 2: Block-Digestion Method (Macro Method) | |
| Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) | |
| Milk - Determination of Nitrogen Content - Part 4: Determination of Non-Protein Nitrogen Content | |
| Milk - Determination of Nitrogen Content - Part 5: Determination of Protein-Nitrogen Content | |
| Milk Based Infant Foods - Determination of Fat Content - Gravimetric Method (Reference Method) | |
| Neutron reference radiation fields Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence | |
| Neutron reference radiations fields Part 1: Characteristics and methods of production | |
| Nonwovens - Test methods Part 3: Determination of tensile strength and elongation at break using the strip method | |
| Nowovens - Test methods Part 1: Determination of mass per unit area | |
| Ophthalmic Instruments - Tonometers | |
| Ophthalmic optics - Spectacle frames - Measuring system and terminology | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 1. Specifications for single-vision and multifocal lenses | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 2. Specifications for progressive power lenses | |
| Ophthalmic Optics - Uncut Finished Spectacle Lenses - Part 3: Transmittance Specifications and Test Methods | |
| Ophthalmic Optics - Uncut Finished Spectacle Lenses - Part 4: Specifications and Test Methods for Anti-Reflective Coatings | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant | |
| Ophthalmic optics \x97 Visual acuity testing \x97 Standard and clinical optotypes and their presentation | |
| Optics and Optical Instruments - Contact Lenses - Determination of the Spectral and Luminous Transmittance | |
| Optics and optical instruments - Focimeters Part 1: General purpose instruments | |
| Optics and Optical Instruments - Focimeters | |
| Optics and Optical Instruments - Ophthalmic Optics - Measuring System for Spectacle Frames | |
| Optics and Optical Instruments - Ophthalmology - Graduated Dial Scale | |
| Ostomy Collection Bags - Part 2: Requirements and Test Methods | |
| Oxygen concentrators for medical use - Safety requirements | |
| Packaging - Dimensional Tolerances for General Purpose Sacks Part 1: Paper Sacks | |
| Packaging - Dimensional Tolerances for General Purpose Sacks Part 2: Sacks Made from Thermoplastic Flexible Film | |
| Paints and varnishes - Drying tests Part 1: Determination of through-dry state and through-dry time | |
| Paints and varnishes - Drying tests Part 2: Pressure test for stackability | |
| Paints and varnishes - Drying tests Part 3: Surface-drying test using ballotini | |
| Paints and varnishes - Drying tests Part 4: Test using a mechanical recorder | |
| Paints and varnishes - Drying tests Part 5: Modified Bandow-Wolff test | |
| Paints and varnishes - Drying tests Part 6: Print-free test | |
| Pallets for materials handling - Flat pallets Part 2: Performance requirements and selection of tests | |
| Pallets for materials handling - Flat pallets Part 3: Maximum working loads | |
| Pallets for materials handling Flat pallets Part 1: Test methods | |
| Parallel pins with internal thread, of hardened steel or martensitic stainless steel | |
| Parallel pins with internal thread, of unhardened steel or austenitic stainless steel | |
| Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) | |
| Petroleum products \x97 Determination of sulfur content \x97 Energy-dispersive X-ray fluorescence spectrometry | |
| Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments | |
| Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind | |
| Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction | |
| Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 2: Dispersion Using an Oscillatory Shaking Machine | |
| Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 3: Dispersion Using a High-Speed Impeller Mill | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller | |
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill | |
| Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance | |
| Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations | |
| Piston-operated volumetric apparatus Part 2: Piston pipettes | |
| Piston-operated volumetric apparatus Part 3: Piston burettes | |
| Piston-operated volumetric apparatus Part 4: Dilutors | |
| Piston-operated volumetric apparatus Part 5: Dispensers | |
| Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error | |
| Piston-operated volumetric apparatus Part 7: Alternative measurement procedures for the determination of volume | |
| Piston-operated volumetric apparatus Part 8: Photometric reference measurement procedure for the determination of volume | |
| Piston-operated volumetric apparatus Part 9: Manually operated precision laboratory syringes | |
| Plain washers for metric bolts, screws and nuts for general purposes - General plan | |
| Plastics - Determination of creep behaviour - Part 1: Tensile creep | |
| Plastics - Determination of Creep Behaviour Part 1: Tensile Creep | |
| Plastics - Determination of creep behaviour Part 2: Flexural creep by three-point loading | |
| Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content | |
| Plastics - Evaluation of the Action of Microorganisms | |
| Plastics - Liquid Phenolic Resins - Conventional Determination of Non-Volatile Matter | |
| Plastics - Liquid Phenolic Resins - Determination of Water Miscibility | |
| Plastics - Methods of Exposure to Direct Weathering, to Weathering Using Glass-Filtered Daylight, and to Intensified Weathering by Daylight Using Fresnel Mirrors | |
| Plastics - Methods of exposure to solar radiation Part 1: General guidance | |
| Plastics - Methods of exposure to solar radiation Part 2: Direct weathering and exposure behind window glass | |
| Plastics - Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation | |
| Plastics - Phenolic Resin Powder - Determination of Flow Distance on a Glass Plate | |
| Plastics - Phenolic Resin Powder - Sieve Analysis Using Air-Jet Sieve Apparatus | |
| Plastics - Phenolic Resins - Determination of Hexamethylenetetrami ne Content - Kjeldahl Method, and Perchloric Acid Method and Hydrochloric Acid Method | |
| Plastics - Phenolic Resins - Determination of Reactivity on a B-Transformation Test Plate | |
| Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography | |
| Plastics - Polybutene (PB) Moulding and Extrusion Materials Part 1: Designation System and Basis for Specifications | |
| Plastics - Polybutene (PB) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics \x97 Determination of creep behaviour \x97 Part 2: Flexural creep by three-point loading | |
| Plastics and Ebonite - Determiation of Identation Hardness by Means of a Durometer (Shore Hardness) | |
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation | |
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Group B: Methods for the Assessment of Surface Cleanliness - Part B9: Field Method for the Conductometric Determination... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Part 3: Hand - and Power-Tool Cleaning | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 1: General Principles | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 2: Abrasive Blast-Cleaning | |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods Part 4: Acid pickling | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast - Cleaned Steel Substrates Part 2: Method for the Grading of Surface Profile... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates Part 3: Method for the Calibration of ISO Surface Profile... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates Part 1: Specifications and Definitions for ISO Surface Profile Comparators for... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates Part 4: Method for the Calibration of ISO Surface Profile Comparators... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Test for the Assessment of Surface Cleanliness - Part 2: Laboratory Determination of Chloride on Cleaned Surface | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for Surface Cleanliness - Part 3: Assessment of Dust on Steel Surface Prepared for Painting (Pressure-Sensitive Tape... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of... | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 6: Extraction of Soluble Contaminants for Analysis - The... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness Part 10: Field method for the titrimetric determination of water-soluble chloride... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness Part 15: Extraction of soluble contaminants for analysis by acid extraction... | |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface... | |
| Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile... | |
| Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions... | |
| Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 5: Measurement of chloride on steel surfaces prepared for painting (ion... | |
| Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 8: Field method for the refractometric determination of moisture | |
| Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water... | |
| Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of previously coated steel substrates after localized removal of previous coatings | |
| Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with... | |
| Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after... | |
| Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness | |
| Protective clothing - Assessment of resistance of materials to molten metal splash | |
| Protective clothing against heat and flame - Determination of heat transmission on exposure to flame | |
| Quality Management and Quality Assurance - Vocabulary | |
| Quality Management and Quality Assurance Standards Part 1: Guidelines for Selection and Use | |
| Quality management and quality assurance standards Part 3. Guidelines for the application of IS0 9001 : 1994 to the development, supply, installation and maintenance of computer software | |
| Quality Management and Quality System Elements Part 1: Guidelines | |
| Quality management systems - Fundamentals and vocabulary | |
| Quality management systems - Guidelines for performance improvements | |
| Quality management systems Requirements | |
| Quality management systems. Fundamentals and vocabulary | |
| Quality management systems. Requirements | |
| Quality systems - Model for quality assurance in final inspection and test \x97 | |
| Quality Systems Model for Quality Assurance in Design, Development, Production, Installation and Servicing | |
| Quality Systems Model for Quality Assurance in Production, Installation and Servicing | |
| Rapeseed - Determination of Glucosinolates Content - Part 1: Method Using High-Performance Liquid Chromatography | |
| Rapeseed - Determination of Glucosinolates Content Part 2: Method Using X-Ray Fluorescence Spectrometry | |
| Rapeseed and rapeseed meals - Determination of glucosinolates content - Method using high-performance liquid chromatography | |
| Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source | |
| Reciprocating internal combustion engine driven alternating current generating sets Part 10: Measurement of airborne noise | |
| Reciprocating internal combustion engine driven alternating current generating sets Part 13: Safety | |
| Refractory materials - Determination of bulk density of granular materials (grain density) | |
| Refractory materials - Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer) | |
| Requirements for the training of scientific divers Part 1: Scientific divers | |
| Requirements for the training of scientific divers Part 2: Advanced scientific divers | |
| Requirements for the training of scientific divers Part 3: Scientific diving project leader | |
| Resistance spot welding - Electrode holders Part 1: Taper fixing 1:10 | |
| Resistance spot welding \x97 Electrode holders Part 2: Morse taper fixing | |
| Resistance spot welding \x97 Electrode holders Part 3: Parallel shank fixing for end thrust | |
| Rigid cellular plastics - Determination of compression properties | |
| Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions | |
| Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance | |
| Sensory analysis - General guidance for the design of test rooms | |
| Sensory analysis - General guidance for the selection, training and monitoring of assessors Part 2: Expert sensory assessors | |
| Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors | |
| Shaped insulating refractory products Determination of cold crushing strength | |
| Shipbuilding - Engine-Room Ventilation in Diesel-Engined Ships - Design Requirements and Basis of Calculations | |
| Shipbuilding - Marine gyro-compasses | |
| Shipbuilding - Marine radar reflectors | |
| Ships and Marine Technology - Dredgers - Classification | |
| Ships and Marine Technology - Dredgers - Vocabulary | |
| Size designation of clothes Part 1: Anthropometric definitions for body measurement | |
| Size designation of clothes Part 2: Primary and secondary dimension indicators | |
| Small Craft - Electric Fans | |
| Small craft - Electrical devices - Protection against ignition of surrounding flammable gases | |
| Small Craft - Marine Propulsion Engines and Systems - Power Measurements and Declarations | |
| Small Craft - Non-Fire-Resistant Fuel Hoses | |
| Small craft - Principal data | |
| Small craft - Remote steering systems | |
| Small Craft - Seacocks and Through-Hull Fittings - Part 1: Metallic | |
| Small craft \x97 Fire protection | |
| Small craft \x97 Power measurements and declarations Part 2: Electric marine propulsion | |
| Small craft \x97 Seacocks and through-hull fittings | |
| Small craft Electrically operated direct-current bilge-pumps | |
| Small craft Fire protection Part 1: Craft with a hull length of up to and including 15 m | |
| Small craft Fire protection Part 2: Craft with a hull length of over 15 m | |
| Small craft Principal data | |
| Small craft Seacocks and through-hull fittings Part 2: Non-metallic | |
| Small craft Steering gear Cable and pulley systems | |
| Snow throwers - Safety requirements and test procedures Part 1: Terminology and common tests | |
| Snow throwers - Safety requirements and test procedures Part 2: Pedestrian-controlle d snow throwers | |
| Snow throwers - Safety requirements and test procedures Part 3: Ride-on snow throwers | |
| Snow throwers - Safety requirements and test procedures Part 4: Additional national and regional requirements | |
| Spring-Type Straight Pins - Coiled, Heavy Duty | |
| Spring-Type Straight Pins - Coiled, Light Duty | |
| Spring-Type Straight Pins - Coiled, Standard Duty | |
| Spring-Type Straight Pins - Slotted, Heavy Duty | |
| Sterile, single-use syringes, with or without needle, for insulin | |
| Suction catheters for use in the respiratory tract | |
| Tall-oil fatty acids for paints and varnishes - Specifications and test methods | |
| Technical Drawings - Roller Bearings Part 2: Detailed Simplified Representation | |
| Technical Drawings - Rolling Bearings Part 1: General Simplified Representation | |
| Technical Drawings - Seals for Dynamic Application - Part 2: Detailed Simplified Representation | |
| Technical Drawings - Seals for Dynamic Application Part 1: General Simplified Representation | |
| Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum | |
| Terminal units for medical gas pipeline systems \x97 Part 2: Terminal units for anaesthetic gas scavenging systems | |
| Test for sustained combustibility of liquids | |
| Textile Glass - Rovings - Manufacture of Test Specimens and Determination of Tensile Strength of Impregnated Rovings | |
| Textiles - Determination of the Permeability of Fabrics to Air | |
| Textiles - Nonwovens - Definition | |
| Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state | |
| Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time | |
| Textiles - Test methods for nonwovens - Part 14: Coverstock wetback | |
| Textiles - Test methods for nonwovens - Part 15: Determination of air permeability | |
| Textiles - Test methods for nonwovens - Part 17: Determination of water penetration (spray impact) | |
| Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test | |
| Textiles - Test Methods for Nonwovens - Part 4: Determination of Tear Resistance | |
| Textiles - Test methods for nonwovens - Part 6: Absorption | |
| Textiles - Test Methods for Nonwovens - Part 7: Determination of Bending Length | |
| Textiles - Test Methods for Nonwovens - Part 8: Determination of Liquid Strike-Through Time (Simulated Urine) | |
| Textiles - Test Methods for Nonwovens - Part 9: Determination of Drape Coefficient | |
| Textiles - Test methods for nonwovens Part 16: Determination of resistance to penetration by water (hydrostatic pressure) | |
| Textiles - Test Methods for Nonwovens Part 2: Determination of Thickness | |
| Textiles \x97 Test methods for nonwovens Part 5: Determination of resistance to mechanical penetration (ball burst procedure) | |
| Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances | |
| Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box | |
| Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes | |
| Thermal insulation - Vocabulary | |
| Thermoplastics valves - Fatigue strength - Test method | |
| Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density | |
| Tracked Changes (Redline) - Aluminium caps and aluminium/ plastic caps for infusion bottles and injection vials \x97 General requirements and test methods | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils \x97 Determination of water content \x97 Karl Fischer method (pyridine free) | |
| Tracked Changes (Redline) - Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method | |
| Tracked Changes (Redline) - Anodizing of aluminium and its alloys \x96 Rating system for the evaluation of pitting corrosion \x96 Chart method | |
| Tracked Changes (Redline) - Awnings for leisure accommodation vehicles \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Building and civil engineering sealants \x97 Determination of adhesion/cohesion properties at constant temperature | |
| Tracked Changes (Redline) - Corrosion tests in artificial atmospheres \x97 Salt spray tests | |
| Tracked Changes (Redline) - Destructive tests on welds in metallic materials \x96 Fracture test | |
| Tracked Changes (Redline) - Destructive tests on welds in metallic materials \x97 Hardness testing Part 2: Microhardness testing of welded joints | |
| Tracked Changes (Redline) - Destructive tests on welds in metallic materials \x97 Impact tests \x97 Test specimen location, notch orientation and examination | |
| Tracked Changes (Redline) - Destructive tests on welds in metallic materials \x97 Tensile test on cruciform and lapped joints | |
| Tracked Changes (Redline) - Determination of sustained combustibility of liquids | |
| Tracked Changes (Redline) - Elastomeric parts for parenterals and for devices for pharmaceutical use Part 3: Determination of released-particle count | |
| Tracked Changes (Redline) - Elastomeric parts for parenterals and for devices for pharmaceutical use Part 5: Functional requirements and testing | |
| Tracked Changes (Redline) - Ergonomics of human-system interaction Part 112: Principles for the presentation of information | |
| Tracked Changes (Redline) - Ergonomics of the thermal environment \x97 Determination of metabolic rate | |
| Tracked Changes (Redline) - Extracorporeal systems for blood purification Part 2: Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters | |
| Tracked Changes (Redline) - Fasteners - Grooved pins with countersunk head - Full-length diamond grooves | |
| Tracked Changes (Redline) - Fasteners - Grooved pins with round head - Full-length diamond grooves | |
| Tracked Changes (Redline) - Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B | |
| Tracked Changes (Redline) - Fasteners - Hexagon high nuts (style 2), with fine pitch thread | |
| Tracked Changes (Redline) - Fasteners - Hexagon regular nuts (style 1), with fine pitch thread | |
| Tracked Changes (Redline) - Fasteners - Hexagon thin nuts (style 0), with fine pitch thread | |
| Tracked Changes (Redline) - Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes | |
| Tracked Changes (Redline) - Fasteners - Taper grooved pins - Full-length progressive grooves | |
| Tracked Changes (Redline) - Fasteners - Taper grooved pins - Half-length progressive grooves | |
| Tracked Changes (Redline) - Fasteners \x97 Hexagon head bolts, with fine pitch thread \x97 Product grades A and B | |
| Tracked Changes (Redline) - Fasteners \x97 Parallel grooved pins, with chamfer point \x97 Full-length diamond grooves | |
| Tracked Changes (Redline) - Fasteners \x97 Reverse-taper grooved pins \x97 Half-length progressive grooves | |
| Tracked Changes (Redline) - Gas welding equipment \x97 Air-aspirated hand blowpipes \x97 Specifications and tests | |
| Tracked Changes (Redline) - Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact | |
| Tracked Changes (Redline) - Infusion equipment for medical use - Part 2: Closures for infusion bottles | |
| Tracked Changes (Redline) - Infusion equipment for medical use Part 10: Accessories for fluid lines for single use with pressure infusion equipment | |
| Tracked Changes (Redline) - Infusion equipment for medical use Part 11: Infusion filters for single use with pressure infusion equipment | |
| Tracked Changes (Redline) - Infusion equipment for medical use Part 8: Infusion sets for single use with pressure infusion apparatus | |
| Tracked Changes (Redline) - Infusion equipment for medical use Part 9: Fluid lines for single use with pressure infusion equipment | |
| Tracked Changes (Redline) - Injection containers and accessories Part 2: Closures for injection vials | |
| Tracked Changes (Redline) - Jewellery and precious metals - Fineness of precious metal alloys | |
| Tracked Changes (Redline) - Metallic coatings \x97 Measurement of coating thickness \x97 Scanning electron microscope method | |
| Tracked Changes (Redline) - Metallic coatings \x97 Review of methods of measurement of ductility | |
| Tracked Changes (Redline) - Nonwovens - Test methods - Part 13: Repeated liquid strike-through time (simulated urine) | |
| Tracked Changes (Redline) - Nonwovens - Test methods - Part 18: Determination of tensile strength and elongation at break using the grab tensile test | |
| Tracked Changes (Redline) - Nonwovens - Test methods - Part 7: Determination of bending length | |
| Tracked Changes (Redline) - Nonwovens - Test methods Part 6: Absorption | |
| Tracked Changes (Redline) - Nonwovens \x96 Vocabulary | |
| Tracked Changes (Redline) - Nonwovens \x97 Test methods \x97 Part 3: Determination of tensile strength and elongation at break using the strip method | |
| Tracked Changes (Redline) - Nonwovens \x97 Test methods \x97 Part 5: Determination of resistance to mechanical penetration (ball burst procedure) | |
| Tracked Changes (Redline) - Nowovens \x97 Test methods \x97 Part 1: Determination of mass per unit area | |
| Tracked Changes (Redline) - Ophthalmic optics \x96 Visual acuity testing \x96 Standard and clinical optotypes andtheir presentation | |
| Tracked Changes (Redline) - Ophthalmic optics \x97 Uncut finished spectacle lenses \x97 Part 3: Transmittance specifications and test methods | |
| Tracked Changes (Redline) - Pallets for materials handling - Flat pallets - Part 1: Test methods | |
| Tracked Changes (Redline) - Pallets for materials handling \x97 Flat pallets \x97 Part 2: Performance requirements and selection of tests | |
| Tracked Changes (Redline) - Petroleum products \x97 Determination of sulfur content \x97 Energy-dispersive X-ray fluorescence spectrometry | |
| Tracked Changes (Redline) - Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations | |
| Tracked Changes (Redline) - Piston-operated volumetric apparatus - Part 2: Pipettes | |
| Tracked Changes (Redline) - Piston-operated volumetric apparatus - Part 3: Burettes | |
| Tracked Changes (Redline) - Piston-operated volumetric apparatus - Part 5: Dispensers | |
| Tracked Changes (Redline) - Piston-operated volumetric apparatus \x97 Part 6: Gravimetric reference measurement procedure for the determination of volume | |
| Tracked Changes (Redline) - Piston-operated volumetric apparatus \x97 Part 7: Alternative measurement procedures for the determination of volume | |
| Tracked Changes (Redline) - Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading | |
| Tracked Changes (Redline) - Plastics - Determination of creep behaviour Part 1: Tensile creep | |
| Tracked Changes (Redline) - Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content | |
| Tracked Changes (Redline) - Plastics - Evaluation of the action of microorganisms | |
| Tracked Changes (Redline) - Plastics - Methods of exposure to solar radiation - Part 1: General guidance | |
| Tracked Changes (Redline) - Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass | |
| Tracked Changes (Redline) - Plastics - Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products - Surface preparation methods Part 3: Hand- and power-tool cleaning | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the... | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on... | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness Part 2: Laboratory determination of chloride on... | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products \x97 Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel... | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products \x97 Tests for the assessment of surface cleanliness Part 4: Guidance on the estimation of... | |
| Tracked Changes (Redline) - Preparation of steel substrates before application of paints and related products \x97 Visual assessment of surface cleanliness \x97 Part 3: Preparation grades of welds, edges and... | |
| Tracked Changes (Redline) - Protective clothing \x97 Assessment of resistance of materials to molten metal splash | |
| Tracked Changes (Redline) - Quality management - Quality of an organization - Guidance to achieve sustained success | |
| Tracked Changes (Redline) - Quality management systems - Requirements | |
| Tracked Changes (Redline) - Quality management systems Fundamentals and vocabulary | |
| Tracked Changes (Redline) - Quality management systems Requirements | |
| Tracked Changes (Redline) - Rapeseed and rapeseed meals - Determination of glucosinolates content - Method using high-performance liquid chromatography | |
| Tracked Changes (Redline) - Reaction to fire tests for floorings \x97 Part 1: Determination of the burning behaviour using a radiant heat source | |
| Tracked Changes (Redline) - Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise | |
| Tracked Changes (Redline) - Rigid cellular plastics - Determination of compression properties | |
| Tracked Changes (Redline) - Rubber and plastics hoses and hose assemblies \x97 Guidelines for selection, storage, use and maintenance | |
| Tracked Changes (Redline) - Sensory analysis - Selection and training of sensory assessors | |
| Tracked Changes (Redline) - Size designation of clothes - Part 2: Primary and secondary dimension indicators | |
| Tracked Changes (Redline) - Small craft - Electric fans | |
| Tracked Changes (Redline) - Small craft - Electrically operated direct-current bilge pumps | |
| Tracked Changes (Redline) - Small craft - Fire protection | |
| Tracked Changes (Redline) - Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations | |
| Tracked Changes (Redline) - Small craft - Non-fire-resistant fuel hoses | |
| Tracked Changes (Redline) - Small craft - Power measurements and declarations - Part 2: Electric marine propulsion | |
| Tracked Changes (Redline) - Small craft - Principal data | |
| Tracked Changes (Redline) - Small craft - Remote mechanical steering systems | |
| Tracked Changes (Redline) - Small craft - Seacocks and through-hull fittings Part 1: Metallic | |
| Tracked Changes (Redline) - Small craft - Steering gear - Cable and pulley systems | |
| Tracked Changes (Redline) - Small craft \x96 Seacocks and through-hull fittings Part 2: Non-metallic | |
| Tracked Changes (Redline) - Sterile single-use syringes, with or without needle, for insulin | |
| Tracked Changes (Redline) - Technical drawings - Construction drawings - Representation of modular sizes, lines and | |
| Tracked Changes (Redline) - Thermoplastics valves \x96 Fatigue strength \x96 Test method | |
| Tracked Changes (Redline) - Timber structures \x96 Testing of joints made with mechanical fasteners \x96 Requirements for timber density | |
| Uranium dioxide powder \x97 Determination of apparent density and tap density | |
| Urine Collection Bags Part 2: Requirements and Test Methods | |
| Visual Acuity Test Types - Method for Correlating Optotypes Used for Non-Clinical Purposes | |
| Visual Acuity Test Types - Specification for Landolt Ring Optotype for Non-Clinical Purposes | |
| Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates | |
| Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates | |
| Water quality - Determination of permanganate index | |
| Water quality - Freshwater algal growth inhibition test with unicellular green algae | |
| Welding and Allied Processes - Quality Classification and Dimensional Tolerances of Thermally Cut (Oxygen/Fuel Gas Flame) Surfaces |
| << Prev | Next >> |