Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
330
340
350
360
370
380
388
389
390
391
392
393
394
395
396
397
398
399
400
410
420
430
440
450
460
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics \x97 Soundscape Part 1: Definition and conceptual framework | |
| Aluminium fluoride for industrial use - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets | |
| Analogue quartz clocks - Fitting dimensions of movements to hands | |
| Bases for design of structures \x97 Loads, forces and other actions \x97 Seismic actions on nonstructural components for building applications | |
| Battery-electric mopeds and motorcycles - Performance - Part 1: Reference energy consumption and range | |
| Battery-electric mopeds and motorcycles - Performance Part 2: Road operating characteristics | |
| Bibliographic references and source identifiers for terminology work | |
| Building construction machinery and equipment \x97 Machinery for concrete surface floating and finishing Part 1: Terms and commercial specifications | |
| Building construction machinery and equipment \x97 Machinery for concrete surface floating and finishing Part 2: Safety requirements and verification | |
| Butadiene Rubber - Determination of Microstructure by Infra-Red Spectrometry | |
| Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method | |
| Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method | |
| Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks Part 2: Determination of apparent density and of open porosity using a hydrostatic method | |
| Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method | |
| Carbonaceous materials used in the production of aluminium \x97 Baked anodes and cathode blocks Part 1: Determination of apparent density using a dimensions method | |
| Carbonaceous materials used in the production of aluminium \x97 Calcined coke \x97 Determination of particle size distribution | |
| Carbonaceous materials used in the production of aluminium \x97 Prebaked anodes and cathode blocks Part 1: Determination of bending/shear strength by the three-point method | |
| Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks Part 2: Determination of flexural strength by the four-point method | |
| Ceramic tiles - Grouts and adhesives Part 1: Terms, definitions and specifications for adhesives | |
| Ceramic tiles - Grouts and adhesives Part 2: Test methods for adhesives | |
| Ceramic tiles - Grouts and adhesives Part 3: Terms, definitions and specifications for grouts | |
| Ceramic tiles - Grouts and adhesives Part 4: Test methods for grouts | |
| Ceramic tiles - Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives | |
| Ceramic tiles \x97 Definitions, classification, characteristics and marking | |
| Ceramic tiles \x97 Grouts and adhesives Part 6: Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles | |
| Chains, sprockets and accessories - List of equivalent terms | |
| Cigarettes - Determination of menthol in smoke condensates - Gas-chromatographic method | |
| Circular knitting machines \x97 Vocabulary | |
| Colloidal systems - Methods for zeta-potential determination - Part 1: Electroacoustic and electrokinetic phenomena | |
| Colloidal systems - Methods for zetapotential determination - Part 2: Optical methods | |
| Colloidal systems \x97 Methods for zeta potential determination Part 3: Acoustic methods | |
| Composites and reinforcement fibres \x97 Carbon fibre reinforced plastics (CFRPs) and metal assemblies \x97 Combined stress test | |
| Computer applications in terminology - Data categories | |
| Condition monitoring and diagnostics of machines - Vibration condition monitoring Part 10: Diagnostic techniques for electrical generators with fluid-film bearings | |
| Condition monitoring and diagnostics of machines - Vibration condition monitoring Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings | |
| Condition Monitoring and Diagnostics of Machines - Vibration Conditioning Monitoring - Part 1: General Procedures | |
| Condition monitoring and diagnostics of machines \x97 Vibration condition monitoring Part 3: Guidelines for vibration diagnosis | |
| Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data | |
| Condition monitoring and diagnostics of machines Vocabulary | |
| Copper, lead and zinc ores and concentrates \x97 Precision and bias of mass measurement techniques | |
| Copper, lead, and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method | |
| Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling | |
| Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling | |
| Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content | |
| Core banking \x97 Mobile financial services Part 1: General framework | |
| Corrosion of metals and alloys Electrochemical potentiokinetic reactivation measurement using the double loop method (based on \xc8ihal\x92s method) | |
| Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques | |
| Cranes Measurement of velocity and time parameters | |
| Crop protection equipment - Reciprocating positive displacement pumps and centrifugal pumps - Test methods | |
| Curvilinear toothed synchronous belt drive systems | |
| Cylindrical gears \x97 ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth | |
| Cylindrical gears \x97 ISO system of flank tolerance classification Part 2: Definitions and allowable values of double flank radial composite deviations | |
| Determination of particle size distribution - Electrical sensing zone method Part 1: Aperture/orifice tube method | |
| Determination of particle size distribution - Electrical sensing zone method Part 2: Tunable resistive pulse sensing method | |
| Determination of particle size distribution - Single-particle light interaction methods - Part 1: Light interaction considerations | |
| Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines | |
| Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method | |
| Determination of particle size distribution by centrifugal liquid sedimentation methods Part 3: Centrifugal X-ray method | |
| Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 1: General Principles and Guidelines | |
| Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 2: Fixed Pipette Method | |
| Determination of Particle Size Distribution by Gravitational Liquid Sedimentation Methods - Part 3: X-Ray Gravitational Technique | |
| Determination of particle size distribution by gravitational liquid sedimentation methods Part 4: Balance method | |
| Determination of particle size distribution by gravitational liquid sedimentation methods Part 5: Photosedimentation techniques | |
| Determination of Particle Size Distributions - Electrical Sensing Zone Method | |
| Determination of the lethal toxic potency of fire effluents | |
| Diesel Engines - High Pressure Fuel Injection Pipe Assemblies - General Requirements and Dimensions | |
| Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors | |
| Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance | |
| Earth-moving machinery \x97 Quick couplers \x97 Safety | |
| Electrically propelled mopeds and motorcycles - Safety specifications Part 3: Electrical safety | |
| Electrically propelled mopeds and motorcycles - Safety specifications | |
| Electrically propelled mopeds and motorcycles \x97 Safety specifications Part 1: On-board rechargeable energy storage system (RESS) | |
| Electrically propelled mopeds and motorcycles \x97 Safety specifications Part 2: Vehicle operational safety | |
| Electro-optical systems - Cavity ring-down technique for high-reflectance measurement | |
| Electronic document management - Vocabulary Part 1: Electronic document imaging | |
| Electronic document management \x97 Vocabulary Part 2: Workflow management | |
| Electronic imaging - Test target for the black-and-white scanning of office documents - Part 1: Characteristics | |
| Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 2: Method of Use | |
| Electronic imaging - Vocabulary | |
| Electronic imaging \x97 Test target for scanning of office documents Part 3: Test target for use in lower resolution applications | |
| Energy performance of buildings - Presentation of measured energy use of buildings | |
| Environmental management for concrete and concrete structure Part 1: General principles | |
| Environmental management for concrete and concrete structures Part 2: System boundary and inventory data | |
| Environmental management for concrete and concrete structures Part 3: Production of concrete constituents and concrete | |
| Environmental management for concrete and concrete structures Part 6: Use of concrete structures | |
| Environmental management for concrete and concrete structures Part 8: Environmental labels and declarations | |
| Environmental monitoring of the impacts from marine finfish farms on soft bottom | |
| Essential oil of oregano [Origanum vulgare L. subsp. hirtum (Link) letsw] | |
| Essential Oils - Determination of carbonyl value - Free hydroxylamine method | |
| Essential Oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride | |
| Essential Oils - Determination of content of phenols | |
| Fans - Efficiency classification for fans Part 1: General requirements | |
| Fans - Efficiency classification for fans Part 6: Calculation of the fan energy index | |
| Fans - Efficiency classification for fans | |
| Fans - Tolerances, methods of conversion and technical data presentation | |
| Fibre-reinforced plastic composites - Determination of open-hole compression strength | |
| Fibre-reinforced plastic composites - Determination of plain-pin bearing strength | |
| Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions | |
| Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates | |
| Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions | |
| Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 3: Wet Compression Moulding | |
| Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs | |
| Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 5: Filament Winding | |
| Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 6: Pultrusion Moulding | |
| Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 7: Resin Transfer Moulding | |
| Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC | |
| Fibre-reinforced plastics \x97 Methods of producing test plates \x97 Part 2: Contact and spray-up moulding | |
| Fibre-reinforced plastics \x97 Methods of producing test plates \x97 Part 8: Compression moulding of SMC and BMC | |
| Fibre-reinforced plastics Methods of producing test plates Part 10: Injection moulding of BMC and other long-fibre moulding compounds General principles and moulding of multipurpose test specimens | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antifungal activity of semiconducting photocatalytic materials | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials | |
| Flexible Cellular Polymeric Materials - Determination of Compression Set Under Humid Conditions | |
| Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements | |
| Framework of the design process for energy-saving single-family residential and small commercial buildings | |
| Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration | |
| Gas analysis \x97 Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration | |
| Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection | |
| Gas cylinders \x97 Gases and gas mixtures \x97 Determination of tissue corrosiveness for the selection of cylinder valve outlets | |
| Glass packaging \x97 26 H 126 crown finish \x97 Dimensions | |
| Glass packaging \x97 26 H 180 crown finish \x97 Dimensions | |
| Glass packaging \x97 Standard tolerances for flaconnage | |
| Graphic Technology - Blankets for Offset Printing | |
| Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer | |
| Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter | |
| Graphic technology - Displays for colour proofing - Characteristics and viewing conditions | |
| Graphic technology - Input data for characterization of 4-colour process printing - Part 2: Expanded data set | |
| Graphic technology - Input data for characterization of 4-colour process printing Part 3: Extended data set including near neutral scale | |
| Graphic technology - Input data for characterization of four-colour process printing Part 1: Initial data set | |
| Graphic Technology - Multilingual Terminology of Printing Arts - Part 5: Screen Printing Terms | |
| Graphic Technology - Multilingual Terminology of Printing Arts Part 2: Screen Printing Terms | |
| Graphic Technology - Prepress Digital Data Exchange - CMYK Standard Colour Image Data (CMYK/SCID) | |
| Graphic Technology - Prepress Digital Data Exchange - Colour Targets for Input Scanner Calibration | |
| Graphic Technology - Prepress Digital Data Exchange - Input Data for Characterization of 4-Colour Process Printing | |
| Graphic technology - Prepress digital data exchange - Part 3: CIELAB standard colour image data (CIELAB/SCID) | |
| Graphic Technology - Prepress Digital Data Exchange - Tag Image File Format for Image Technology (TIFF/IT) | |
| Graphic technology - Process control - Certified reference material for opaque area calibration of transmission densitometers | |
| Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Part 1: Parameters and measurement methods | |
| Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Part 2: Offset lithographic processes | |
| Graphic Technology - Process Control for the Manufacture of Half-Tone Colour Separations, Proofs and Production Prints - Part 3: Coldset Offset Lithography and Letterpress on Newsprint | |
| Graphic Technology - Process Control for the Manufacture of Half-Tone Colour Separations, Proofs and Production Prints - Part 5: Screen Printing | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 7: Proofing processes working directly from digital data | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints Part 8: Validation print processes working directly from digital data | |
| Graphic technology - Process control for the production of half-tone colour separations, proof and production prints Part 9: Metal decoration printing processes using offset lithography | |
| Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements | |
| Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems | |
| Graphic technology - Safety requirements for graphic technology equipment and systems Part 4: Converting equipment and systems | |
| Graphic technology - Safety requirements for graphic technology equipment and systems Part 5: Stand-alone platen presses | |
| Graphic technology - Vocabulary - Part 4: Postpress terms | |
| Graphic technology - Vocabulary Part 3: Printing terms | |
| Graphic technology . Prepress digital data exchange . Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) | |
| Graphic technology \x97 Ink, paper and labels \x97 Requirements on hot alkali penetration and resistance | |
| Graphic technology \x97 Prepress digital data exchange Part 1: Colour targets for input scanner calibration | |
| Graphic technology \x97 Prepress digital data exchange Part 2: Advanced colour targets for input scanner calibration | |
| Graphic technology \x97 Prepress digital data exchange Part 5: Scene-referred standard colour image data (RIMM/SCID) | |
| Graphic technology \x97 Vocabulary \x97 Part 1: Fundamental terms | |
| Graphic technology Prepress digital data exchange Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) | |
| Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 4: Publication gravure printing | |
| Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 6: Flexographic printing | |
| Graphic technology Safety requirements for graphic technology equipment and systems - Part 2: Press equipment and systems | |
| Graphic technology Safety requirements for printing press systems | |
| Graphic technology. Plates for offset printing. Dimensions | |
| Graphic technology. Prepress digital data exchange Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) | |
| Graphic technology. Prepress digital data exchange. CMYK standard colour image data (CMYK/SCID) | |
| Graphic technology. Prepress digital data exchange. Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID] DVD | |
| Graphic technology. Safety requirements for binding and finishing systems and equipment | |
| Guidelines on types of glass of normal bulk-production composition and their test methods | |
| Hard coal \x97 Determination of abrasiveness | |
| Hardware for furniture \x97 Strength and durability of extension elements and their components | |
| Health informatics - Telehealth services - Quality planning guidelines | |
| Hydraulic fluid power - Method for determining the required cleanliness level (RCL) of a system | |
| Hydraulic spin-on filters with finite lives \x97 Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope | |
| Implants for surgery - Calcium phosphates - Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes | |
| Implants for surgery - Ceramic materials based on yttriastabilized tetragonal zirconia (Y-TZP) | |
| Implants for surgery - Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements | |
| Implants for surgery - Retrieval and analysis of surgical implants Part 1: Retrieval and handling | |
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview | |
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Part 3: Enveloping surface method | |
| Industrial fans Determination of fan sound power levels under standardized laboratory conditions Part 1: General overview | |
| Industrial fans Determination of fan sound power levels under standardized laboratory conditions Part 2: Reverberant room method | |
| Industrial fans Determination of fan sound power levels under standardized laboratory conditions Part 3: Enveloping surface method | |
| Industrial fans Determination of fan sound power levels under standardized laboratory conditions Part 4: Sound intensity method | |
| Information and documentation - Digital records conversion and migration process | |
| Intelligent transport systems (ITS) - The use of personal ITS stations to support ITS service provision for travelers Part 2: General requirements for data exchange between ITS stations | |
| Intelligent transport systems (ITS) \x97 Guidance protocol via personal ITS station for advisory safety systems Part 2: Road guidance protocol (RGP) requirements and specification | |
| Intelligent transport systems (ITS) \x97 Guidance protocol via personal ITS station for advisory safety systems Part 3: Road guidance protocol (RGP) conformance test specification | |
| Intelligent transport systems (ITS) \x97 The use of personal ITS station to support ITS service provision for travellers Part 1: General information and use case definitions | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - Using broadcast communications | |
| Intelligent transport systems \x97 Vehicle interface for provisioning and support of ITS services Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface | |
| Intelligent transport systems \x97 Vehicle interface for provisioning and support of ITS Services Part 3: Unified vehicle interface protocol (UVIP) server and client API specification | |
| Intelligent transport systems \x97 Vehicle interface for provisioning and support of ITS Services Part 4: Unified vehicle interface protocol (UVIP) conformance test specification | |
| Iron Ores - Determination of Lead Content - Flame Atomic Absorption Spectrometric Method | |
| Iron Ores - Determination of Potassium Content - Flame Atomic Absorption Spectrometric Method | |
| Iron Ores - Determination of Sodium Content - Flame Atomic Absorption Spectrometric Method | |
| Iron Ores - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method | |
| Laboratory Glassware Disposable Microhaematocrit Capillary Tubes | |
| Lactose - Determination of water content - Karl Fischer method | |
| Liquefied natural gas (LNG) - Tanks for on-board storage as a fuel for automotive vehicles | |
| Lubricants, industrial oils and related products (class L) - Family C (Gears) Part 1. Specifications for lubricants for enclosed gear systems | |
| Lubricants, industrial oils and related products (class L) - Family C (gears) Part 1: Specifications for lubricants for enclosed gear systems | |
| Lubricants, industrial oils and related products (Class L) - Family X (Greases) - Specification | |
| Lubricants, industrial oils and related products (class L) \x97 Family C (gears) Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) | |
| Lubricants, industrial oils and related products (Class L) \x97 Family C (gears) Part 3: Specifications for greases for enclosed and open gear systems | |
| Management of terminology resources - Data categories Part 1: Specifications | |
| Management of terminology resources - Data categories Part 2: Repositories | |
| Marine technology - Seawater desalination - Vocabulary | |
| Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full | |
| Mechanical testing of metals - Ductility testing - Compression test for porous and cellular metals | |
| Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 2: Analysis and interpretation of measurements at the fingertips | |
| Mechanical vibrations - Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips | |
| Mesurement of Conductive Liquid Flow in Closed Conduits - Flanged Electromagnetic Flowmeters - Overall Length | |
| Metallic and other inorganic coatings - Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish | |
| Methods for zeta potential determination - Streaming potential and streaming current methods for porous materials | |
| Methods of Evaluation of the Lifetime of a Battery-Powered Watch | |
| Methods of Test for Pallet Joints Part 1: Determination of Bending Resistance of Pallet Nails, Other Dowel-Type Fasteners and Staples | |
| Methods of test for refractory products Part 1: Determination of dynamic Young\x92s modulus (MOE) by impulse excitation of vibration | |
| Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size | |
| Micrographics - Use of Bar Codes on Aperture Cards | |
| Microscopes \x97 Information provided to the user | |
| Milk and milk products - Determination of the lipase activity of pregastric lipase preparation | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests... | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports | |
| Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests | |
| Motorcycles \x97 Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles \x97 Part 4: Variables to be measured, instrumentation and measurement procedures | |
| Nuclear Energy - Radiation Protection - Individual Thermoluminescence Dosemeters for Extremities and Eyes | |
| Nuclear energy \x97 Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets \x97 Inert gas extraction and conductivity detection method | |
| Nuclear energy \x97 Vocabulary Part 1: General terminology | |
| Nuclear energy, nuclear technologies, and radiological protection - Vocabulary Part 4: Dosimetry for radiation processing | |
| Nuclear energy, nuclear technologies, and radiological protection \x97 Vocabulary Part 2: Radiological protection | |
| Nuclear energy, nuclear technologies, and radiological protection \x97 Vocabulary Part 3: Nuclear fuel cycle | |
| Nuclear energy, nuclear technologies, and radiological protection \x97 Vocabulary Part 5: Nuclear reactors | |
| Nuclear fuel technology \x97 Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method | |
| Olive oils and olive-pomace oils - Determination of aliphatic alcohols content by capillary gas chromatography | |
| Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content | |
| Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography | |
| Optics and optical instruments - Ancillary devices for geodetic instruments Part 2: Tripods | |
| Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) \x97 Framework for specification of BIM implementation | |
| Packaging - Complete, Filled Transport Packages and Unit Loads - Vertical Random Vibration Test | |
| Pallets \x97 Slip sheets | |
| Paper, board and pulps - Determination of acidsoluble magnesium, calcium, manganese, iron, copper, sodium and potassium | |
| Particle size analysis - Image analysis methods - Part 1: Static image analysis methods | |
| Particle size analysis - Laser diffraction methods - Part 1: General principles | |
| Particle size analysis - Laser diffraction methods | |
| Particle size analysis Image analysis methods Part 2: Dynamic image analysis methods | |
| Performance criteria for authentication solutions used to combat counterfeiting of material goods | |
| Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods | |
| Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method | |
| Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks Part 1: Manual methods | |
| Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils | |
| Petroleum products and lubricants - Determination of the mechanical stability of greases in presence of water | |
| Petroleum products and lubricants \x97 Rheological properties of lubricating greases \x97 Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system | |
| Petroleum products Determination of the filterability of lubricating oils Part 1: Procedure for oils in the presence of water | |
| Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 18: Vocabulary | |
| Physical and mechanical properties of wood - Test methods for small clear wood specimens Part 5: Determination of strength in compression perpendicular to grain | |
| Physical and mechanical properties of wood \x97 Test methods for small clear wood specimens Part 16: Determination of volumetric swelling | |
| Physical and mechanical properties of wood \x97 Test methods for small clear wood specimens. Part 8: Determination of ultimate strength in shearing parallel to grain | |
| Plain bearings - Reuse, recycling and disposal of plain bearing materials | |
| Plastics - Blow-moulded polypropylene containers for packaging of liquid foodstuffs | |
| Plastics - Vertical flame spread determination for film and sheet | |
| Quantitative methods in process improvement - Six Sigma Part 1: DMAIC methodology | |
| Quantitative methods in process improvement - Six Sigma Part 2: Tools and techniques | |
| Radiological protection \x97 Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles | |
| Radiological protection \x97 Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 2: Ex vivo human tooth enamel dosimetry | |
| Railway applications - Polymeric composite sleepers, bearers and transoms Part 1: Material characteristics | |
| Railway applications - Polymeric composite sleepers, bearers and transoms Part 2: Product testing | |
| Railway applications - Polymeric composite sleepers, bearers and transoms Part 3: General requirements | |
| Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from highspeed and mediumspeed reciprocating internal combustion engines measured at the engine feet | |
| Recreational diving services - Requirements for the conduct of snorkelling excursions | |
| Reference neutron radiations - Characteristics and methods of production of simulated workplace neutron fields | |
| Reference radiation fields - Simulated workplace neutron fields - Part 1: Characteristics and methods of production | |
| Reference radiation fields - Simulated workplace neutron fields - Part 2: Calibration fundamentals related to the basic quantities | |
| Refractory Products - Determination of Resistance to Carbon Monoxide | |
| Refuse collection vehicles - Vocabulary, classification and requirements for commercial specifications | |
| Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants | |
| Road vehicles - 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations Part 1: General requirements and definitions | |
| Road Vehicles - Anchorages in Vehicles and Attachments to Anchorages for Child Restraint Systems - Part 1: Seat Bight Anchorages and Attachments | |
| Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems Part 4: Lower tether anchorages | |
| Road Vehicles - Child Restraint Systems - Report Form for Accidents Involving Child Passengers | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 10: Pressure relief device (PRD) | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 11: Excess flow valve | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 12: Gas-tight housing and ventilation hoses | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 16: Fittings | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 4: Check valve | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 5: Manual cylinder valve | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 8: Pressure indicator | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 9: Pressure relief valve (PRV) | |
| Road vehicles - LED lamp characteristics for bulb compatible failure detection Part 1: LED lamps used as direction indicators | |
| Road vehicles - Open Test sequence eXchange format (OTX) Part 3: Standard extensions and requirements | |
| Road vehicles - Reduction of misuse risk of child restraint systems - Part 1: Forms for field studies | |
| Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 2: Requirements and Test Procedures for Correct Installation (Panel Method) | |
| Road Vehicles - Reduction of Misuse Risk of Child Restraint Systems - Part 3: Prediction and Assessment of Misuse by Misuse Mode and Effect Analysis (MMEA) | |
| Road vehicles - Refrigerant systems used in mobile air conditioning systems (MAC) - Safety requirements | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 1: General requirements and definitions | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 2: Performance and general test methods | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 3: Pressure regulator | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 6: Automatic valve | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 13: Rigid fuel line in stainless steel | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 14: Flexible fuel line | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 15: Filter | |
| Road vehicles \x97 Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part 7: Gas injector | |
| Road Vehicles \x97 Fully Automatic Coupling Systems 24 V (FACS) for heavy commercial vehicle combinations Part 2: 50 mm fifth wheel couplings \x97 electrical and pneumatic interface | |
| Road vehicles \x97 Liquefied natural gas (LNG) fuel system components Part 9: Gas-tight housing and ventilation hose | |
| Road vehicles \x97 Liquefied natural gas (LNG) refuelling connector \x97 3,1 MPa connector | |
| Road vehicles \x97 Open Test sequence eXchange format (OTX) Part 1: General information and use cases | |
| Road vehicles \x97 Open Test sequence eXchange format (OTX) Part 2: Core data model specification and requirements | |
| Road vehicles \x97 Open Test sequence eXchange format (OTX) Part 4: Expanded extensions interface definition | |
| Road vehicles \x97 Trailers up to 3,5 t \x97 Requirements for jockey wheels and drawbar supports | |
| Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 2: Top tether anchorages and attachments | |
| Road vehicles Anchorages in vehicles and attachments to anchorages for child restraint systems Part 3: Classification of child restraint dimensions and space in vehicle | |
| Rolling bearings - Accessories for sleeve type linear ball bearings Part 1: Boundary dimensions and tolerances for series 1 and 3 | |
| Rolling bearings - Accessories for sleeve type linear ball bearings Part 2: Boundary dimensions and tolerances for series 5 | |
| Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type - Accessories | |
| Royal jelly \x97 Specifications | |
| Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer | |
| Rubber - Standard reference elastomers (SRE's) for characterizing the effect of liquids on vulcanized rubbers | |
| Rubber and plastics hoses for marine-engine wet-exhaust systems Specification | |
| Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number | |
| Rubber, natural latex concentrate \x97 Determination of KOH number | |
| Rubber, Vulcanized or Thermoplastic - Determination of Flex Cracking and Crack Growth (De Mattia) | |
| Safe transport of radioactive materials \x97 Leakage testing on packages | |
| Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 1: Staff responsibilities | |
| Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure | |
| Sensory analysis \x97 General guidance for the staff of a sensory evaluation laboratory \x97 Part 2: Recruitment and training of panel leaders | |
| Sensory analysis Methodology General guidance for establishing a sensory profile | |
| Sensory analysis Methods for assessing modifications to the flavour of foodstuffs due to packaging | |
| Ships and marine technology - Launching appliances for davit-launched liferafts | |
| Ships and marine technology - Risk assessment on anti-fouling systems on ships Part 1: Marine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships | |
| Ships and marine technology - Risk assessment on antifouling systems on ships Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances | |
| Ships and marine technology \x97 Risk assessment on anti-fouling systems on ships Part 3: Human health risk assessment method of biocidally active substances used in anti-fouling paints on ships during... | |
| Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument | |
| Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors | |
| Steel fibres for concrete - Definitions and specifications | |
| Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VD max SD | |
| Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement | |
| Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant... | |
| Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer | |
| Sustainability criteria for bioenergy | |
| Technical drawings - Dimensioning - General principles, definitions, methods of execution and special indications | |
| Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines | |
| Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems | |
| Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines | |
| Technical Drawings - General Principles of Presentation - Part 23: Lines on Construction Drawings | |
| Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings | |
| Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings | |
| Technical Drawings - General Principles of Presentation - Part 34: Views on Mechanical Engineering Drawings | |
| Technical Drawings - General Principles of Presentation - Part 40: Basic Conventions for Cuts and Sections | |
| Technical Drawings - General Principles of Presentation - Part 44: Sections on Mechanical Engineering Drawings | |
| Technical Drawings - General Principles of Presentation - Part 50: Basic Conventions for Representing Areas on Cuts and Sections | |
| Technical drawings - General principles of presentation Part 30: Basic conventions for views | |
| Technical drawings - General principles of presentation | |
| Technical drawings - Method of indicating surface texture | |
| Technical drawings Indication of dimensions and tolerances Part 1: General principles | |
| Technical product documentation (TPD) \x97 General principles of presentation Part 15: Presentation of shipbuilding drawings | |
| Technical product documentation (TPD) \x97 General principles of presentation Part 43: Projection methods in building drawings | |
| Technical product documentation (TPD) \x97 Indication of dimensions and tolerances Part 4: Dimensioning of shipbuilding drawings | |
| Technical product documentation \x97 Indication of dimensions and tolerances Part 5: Dimensioning of structural metal work | |
| Terminology work in support of multilingual communication Part 1: Fundamentals of translation-oriented terminography | |
| Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes | |
| Test conditions for numerically controlled turning machines and turning centres - Part 5: Accuracy of feeds, speeds and interpolations | |
| Test conditions for numerically controlled turning machines and turning centres \x97 Part 8: Evaluation of thermal distortions | |
| Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with a horizontal workholding spindle | |
| Test conditions for numerically controlled turning machines and turning centres Part 2: Geometric tests for machines with a vertical workholding spindle | |
| Test conditions for numerically controlled turning machines and turning centres Part 3: Geometric tests for machines with inverted vertical workholding spindles | |
| Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece | |
| Test conditions for numerically controlled turning machines and turning centres Part 7: Evaluation of contouring performance in the coordinate planes | |
| Textile - Biaxial tensile properties of woven fabric - Determination of elasticity properties using a cruciform test piece | |
| Textiles - Synthetic filament yarns - Determination of dynamic thermal draw-force of partially oriented yarns (POY) | |
| Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions | |
| Thermal spraying - Recommendations for thermal spraying | |
| Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings | |
| Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling | |
| Thermoplastics piping systems for non-pressure applications - Test method for watertightness | |
| Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating... | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness | |
| Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints | |
| Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints | |
| Tissue paper and tissue products Part 18: Determination of surface friction | |
| Tissue-engineered medical products \x97 Quantification of sulfated glycosaminoglycans (sGAG) for evaluation of chondrogenesis | |
| Titanium and titanium alloys - Determination of carbon - Infrared absorption method after combustion in an induction furnace | |
| Tobacco and tobacco products \x97 Determination of nicotine purity \x97 Gravimetric method using tungstosilicic acid | |
| Tourism and related services - Requirements and recommendations for beach operation | |
| Traceability of finfish products - Specification on the information to be recorded in captured finfish distribution chains | |
| Traceability of finfish products - Specification on the information to be recorded in farmed finfish distribution chains | |
| Tracked Changes (Redline) - Building construction machinery and equipment - Machinery for concrete surface floating and finishing - Part 2: Safety requirements and verification | |
| Tracked Changes (Redline) - Building construction machinery and equipment \x97 Machinery for concrete surface floating and finishing \x97 Part 1: Commercial specifications | |
| Tracked Changes (Redline) - Cigarettes - Determination of menthol in total particulate matter from mainstream cigarette smoke with a smoking regime according to ISO 3308 (standard smoking regime) - Gas... | |
| Tracked Changes (Redline) - Colloidal systems - Methods for zeta-potential determination Part 2: Optical methods | |
| Tracked Changes (Redline) - Condition monitoring and diagnostics of machines - Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data | |
| Tracked Changes (Redline) - Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling | |
| Tracked Changes (Redline) - Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content | |
| Tracked Changes (Redline) - Crop protection equipment - Reciprocating positive displacement pumps and centrifugal pumps - Test method | |
| Tracked Changes (Redline) - Cylindrical gears - ISO system of flank tolerance classification Part 2: Definitions and allowable values of double flank radial composite deviations | |
| Tracked Changes (Redline) - Determination of particle size distribution by centrifugal liquid sedimentation methods \x97 Part 1: General principles, requirements and guidance | |
| Tracked Changes (Redline) - Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles, requirements and guidance | |
| Tracked Changes (Redline) - Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions | |
| Tracked Changes (Redline) - Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance | |
| Tracked Changes (Redline) - Electrically propelled mopeds and motorcycles - Safety specifications - Part 1: On-board rechargeable energy storage system (RESS) | |
| Tracked Changes (Redline) - Electrically propelled mopeds and motorcycles - Safety specifications - Part 2: Vehicle operational safety | |
| Tracked Changes (Redline) - Electrically propelled mopeds and motorcycles \x97 Safety specifications \x97 Part 3: Electrical safety | |
| Tracked Changes (Redline) - Estimation of the lethal toxic potency of fire effluents | |
| Tracked Changes (Redline) - Fans - Determination of fan sound power levels under standardized laboratory conditions - Part 1: General overview | |
| Tracked Changes (Redline) - Fans - Tolerances, methods of conversion and technical data presentation | |
| Tracked Changes (Redline) - Fans \x97 Determination of fan sound power levels under standardized laboratory conditions \x97 Part 4: Sound intensity method | |
| Tracked Changes (Redline) - Fibre-reinforced plastic composites - Determination of open-hole compression strength | |
| Tracked Changes (Redline) - Fibre-reinforced plastics - Determination of the plain-pin bearing strength | |
| Tracked Changes (Redline) - Graphic technology - Plates for offset printing - Dimensions | |
| Tracked Changes (Redline) - Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints Part 5: Screen printing | |
| Tracked Changes (Redline) - Graphic technology - Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data | |
| Tracked Changes (Redline) - Graphic technology \x97 Prepress digital data exchange \x97 Part 1: Colour targets for input scanner calibration | |
| Tracked Changes (Redline) - Graphic technology \x97 Process control for the production of half-tone colour separations, proof and production prints \x97 Part 8: Validation print processes working directly from digital... | |
| Tracked Changes (Redline) - Hard coal - Determination of abrasiveness | |
| Tracked Changes (Redline) - Hydraulic spin-on filters with finite lives - Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope | |
| Tracked Changes (Redline) - Implants for surgery - Coatings on metallic surgical implants - Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders | |
| Tracked Changes (Redline) - Industrial trucks - Fork arm extensions and telescopic fork arms - Technical characteristics and strength requirements | |
| Tracked Changes (Redline) - Information and documentation \x97 Digital records conversion and migration process | |
| Tracked Changes (Redline) - Lubricants, industrial oils and related products (class L) - Family C (gears) - Part 1: Specifications for lubricants for enclosed gear systems | |
| Tracked Changes (Redline) - Lubricants, industrial oils and related products (Class L) - Family X (Greases) - Specifications | |
| Tracked Changes (Redline) - Management of terminology resources - Data categories - Part 1: Specifications | |
| Tracked Changes (Redline) - Management of terminology resources - Data category specifications | |
| Tracked Changes (Redline) - Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full | |
| Tracked Changes (Redline) - Nuclear energy, nuclear technologies, and radiological protection - Vocabulary - Part 2: Radiological protection | |
| Tracked Changes (Redline) - Nuclear energy, nuclear technologies, and radiological protection - Vocabulary - Part 3: Nuclear installations, processes and technologies | |
| Tracked Changes (Redline) - Olive oils and olive-pomace oils - Determination of aliphatic and triterpenic alcohols content by capillary gas chromatography | |
| Tracked Changes (Redline) - Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Framework for specification of BIM implementation | |
| Tracked Changes (Redline) - Paper, board, pulps and cellulose nanomaterials - Determination of acidsoluble magnesium, calcium, manganese, iron, copper, sodium and potassium | |
| Tracked Changes (Redline) - Particle size analysis \x97 Image analysis methods \x97 Part 2: Dynamic image analysis methods | |
| Tracked Changes (Redline) - Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water | |
| Tracked Changes (Redline) - Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils | |
| Tracked Changes (Redline) - Retrieval and analysis of surgical implants Part 1: Retrieval and handling | |
| Tracked Changes (Redline) - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems Part 3: Classification of child restraint system and space in vehicle | |
| Tracked Changes (Redline) - Road vehicles - Open Test sequence eXchange format (OTX) - Part 3: Standard extensions and requirements | |
| Tracked Changes (Redline) - Road vehicles - Reduction of misuse risk of child restraint systems - Part 2: Requirements and test procedures for correct installation (panel method) | |
| Tracked Changes (Redline) - Road vehicles - Reduction of misuse risk of child restraint systems - Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)... | |
| Tracked Changes (Redline) - Road vehicles \x97 Liquefied natural gas (LNG) fuel system components \x97 Part 9: Gas-tight housing and ventilation hose | |
| Tracked Changes (Redline) - Rolling bearings - Accessories for sleeve type linear ball bearings Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3 | |
| Tracked Changes (Redline) - Rolling bearings - Accessories for sleeve type linear ball bearings Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5 | |
| Tracked Changes (Redline) - Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer | |
| Tracked Changes (Redline) - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers | |
| Tracked Changes (Redline) - Rubber, natural latex concentrate - Determination of KOH number | |
| Tracked Changes (Redline) - Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) | |
| Tracked Changes (Redline) - Surface chemical analysis - Secondary ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer | |
| Tracked Changes (Redline) - Synchronous belt drives - Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys | |
| Tracked Changes (Redline) - Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with horizontal workholding spindle(s) | |
| Tracked Changes (Redline) - Test conditions for numerically controlled turning machines and turning centres Part 2: Geometric tests for machines with a vertical workholding spindle | |
| Tracked Changes (Redline) - Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with... | |
| Tracked Changes (Redline) - Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness | |
| Tracked Changes (Redline) - Thermoplastics piping systems for non-pressure underground drainage and sewerage \x97 Thermoplastics inspection chamber and manhole bases \x97 Test methods for buckling resistance | |
| Tracked Changes (Redline) - Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid | |
| Tracked Changes (Redline) - Tractors and machinery for agriculture and forestry \x97 Basic types \x97 Vocabulary | |
| Tracked Changes (Redline) - Water quality - Simultaneous determination of tritium and carbon 14 activities - Test method using liquid scintillation counting | |
| Tractors and machinery for agriculture and forestry \x97 Basic types \x97 Vocabulary | |
| Translation-Oriented Terminography | |
| Tyres - Coast-by methods for measurement of tyre-to-road sound emission: Uncertainties | |
| Tyres \x97 Coast-by methods for measurement of tyre-to-road sound emission | |
| Validation method for fire gas analysis Part 1: Limits of detection and quantification | |
| Validation methods for fire gas analyses Part 2: Intralaboratory validation of quantification methods | |
| Water quality - Radium-226 Part 1: Test method using liquid scintillation counting | |
| Water quality \x97 Lead-210 \x97 Test method using liquid scintillation counting | |
| Water quality \x97 Plutonium, americium, curium and neptunium \x97 Test method using alpha spectrometry | |
| Water quality \x97 Radium-226 Part 2: Test method using emanometry | |
| Water quality \x97 Radium-226 Part 3: Test method using coprecipitation and gamma-spectrometry | |
| Water quality \x97 Radium-226 Part 4: Test method using alpha spectrometry | |
| Water quality \x97 Radon-222 Part 1: General principles | |
| Water quality \x97 Radon-222 Part 2: Test method using gamma-ray spectrometry | |
| Water quality \x97 Radon-222 Part 3: Test method using emanometry | |
| Water quality \x97 Radon-222 Part 4: Test method using two-phase liquid scintillation counting | |
| Water quality \x97 Simultaneous determination of tritium and carbon 14 activities \x97 Test method using liquid scintillation counting | |
| Water quality \x97 Strontium 90 and strontium 89 \x97 Test methods using liquid scintillation counting or proportional counting | |
| Water quality \x97 Uranium \x97 Test method using alpha liquid scintillation counting | |
| Water quality \x97 Uranium isotopes \x97 Test method using alpha-spectrometry | |
| Water-source heat pumps - Testing and rating for performance Part 1: Water-to-air and brine-to-air heat pumps | |
| Water-source heat pumps \x97 Testing and rating for performance Part 2: Water-to-water and brine-to-water heat pumps | |
| Zinc sulfide concentrates - Determination of zinc - Ion-exchange/EDTA titrimetric method | |
| Zinc sulfide concentrates Determination of zinc Solvent extraction and EDTA titrimetric method |
| << Prev | Next >> |