Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
320
330
340
350
360
370
379
380
381
382
383
384
385
386
387
388
389
390
391
400
410
420
430
440
450
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Audiometric Test Methods - Part 1: Basic Pure Tone Air and Bone Conduction Threshold Audiometry | |
| Acoustics - Audiometric Test Methods - Part 3: Speech Audiometry | |
| Acoustics - Audiometric Test Methods Part 2: Sound Field Audiometry with Pure Tone and Narrow-Band Test Signals | |
| Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment | |
| Acoustics - Measurement Procedures for Ducted Silencers - Insertion Loss, Flow Noise and Total Pressure Loss | |
| Acoustics - Rating of Sound Insulation in Buildings and of Building Elements Part 1: Airborne Sound Insulation | |
| Acoustics - Rating of Sound Insulation in Buildings and of Building Elements Part 2: Impact Sound Insulation | |
| Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation | |
| Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation | |
| Animal and Vegetable Fats and Oils - Determination of Copper, Iron and Nickel Contents - Graphite Furnace Atomic Absorption Method | |
| Animal and Vegetable Fats and Oils - Determination of Solid Fat Content - Pulsed Nuclear Magnetic Resonance Method | |
| Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR Part 1: Direct method | |
| Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR Part 2: Indirect method | |
| Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium | |
| Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings | |
| Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer | |
| Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees... | |
| Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium | |
| Basic human body measurements for technological design Part 1: Body measurement definitions and landmarks | |
| Basic human body measurements for technological design | |
| Binders for paints and varnishes Epoxy resins General methods of test | |
| Building construction - Jointing products - Determination of elastic recovery of sealants | |
| Building construction - Jointing products - Determination of resistance to flow of sealants | |
| Building Information Modelling \x97 Level of Information Need Part 1: Concepts and principles | |
| Button head screws Part 1: Hexagon socket button head screws | |
| Button head screws Part 2: Hexagon socket button head screws with collar | |
| Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) | |
| Cardiovascular implants and extracorporeal systems \x97 Vascular prostheses \x97 Tubular vascular grafts and vascular patches | |
| Cellular Plastics - Polyethylene - Methods of Test | |
| Cereals - Determination of bulk density, called mass per hectolitre Part 1: Reference method | |
| Cereals - Determination of bulk density, called mass per hectolitre Part 2: Method of traceability for measuring instruments through reference to the international standard instrument | |
| Cereals - Determination of bulk density, called mass per hectolitre Part 3: Routine method | |
| Cereals and cereal products - Determination of moisture content - Reference method | |
| Cereals and cereal products - Determination of moisture content Part 1: Reference method | |
| Cereals and cereal products \x97 Determination of moisture content Part 2: Automatic drying oven method | |
| Cereals and milled cereal products \x97 Determination of the viscosity of flour \x97 Method using an amylograph | |
| Child-resistant packaging Requirements and testing procedures for reclosable packages | |
| Coating powders - Part 10: Determination of deposition efficiency | |
| Coating powders - Part 11: Inclinedplane flow test | |
| Coating powders - Part 12: Determination of compatibility | |
| Coating powders - Part 13: Particle size analysis by laser diffraction | |
| Coating powders - Part 1: Determination of particle size distribution by sieving | |
| Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) | |
| Coating powders - Part 3: Determination of density by liquid displacement pyknometer | |
| Coating powders - Part 5: Determination of flow properties of a powder/air mixture | |
| Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature | |
| Coating powders - Part 7: Determination of loss of mass on stoving | |
| Coating powders - Part 8: Assessment of the storage stability of thermosetting powders | |
| Coating Powders - Part 9: Sampling | |
| Coating powders Part 14: Terminology | |
| Coating powders Part 15: Rheology | |
| Coating powders Part 16: Determination of density by liquid displacement in a measuring cylinder | |
| Coating powders Part 4: Calculation of lower explosion limit | |
| Construction Drawings - Simplified Representation of Demolition and Rebuilding | |
| Contact Lenses and Contact Lens Care Products - Vocabulary - Part 2: Contact Lens Care Products | |
| Contact lenses and contact lens care products Vocabulary Part 1: Contact lenses | |
| Copper-Bearing Intra-Uterine Contraceptive Devices - Requirements, Tests | |
| Corrosion of Metals and Alloys - Basic Terms and Definitions | |
| Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests | |
| Corrosion of metals and alloys - Stress corrosion cracking Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement | |
| Corrosion of metals and alloys - Stress corrosion testing Part 10: Reverse U-bend method | |
| Corrosion of metals and alloys - Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement | |
| Corrosion Tests in Artificial Atmospheres - General Requirements | |
| Corrugating medium - Determination of the flat crush resistance after laboratory fluting Part 1: A-flute | |
| Corrugating medium - Determination of the flat crush resistance after laboratory fluting | |
| Corrugating medium \x96 Determination of the flat crush resistance after laboratory fluting Part 2: B-flute | |
| Cycles - Safety requirements for bicycles for young children | |
| Dental Absorbent Points | |
| Dental Amalgamators | |
| Dental Equipment - Mercury and Alloy Mixers and Dispensers | |
| Dental Explorers | |
| Dental Gypsum-Bonded Casting Investments | |
| Dental Handpieces - Part 1: High-Speed Air Turbine Handpieces | |
| Dental Handpieces Part 2: Straight and Geared Angle Handpieces | |
| Dental Materials - Determination of Colour Stability | |
| Dental Operator's Stool | |
| Dental Rotary Instruments - Cutters - Part 2: Carbide Laboratory Cutters | |
| Dental Rotary Instruments - Cutters - Part 4: Miniature Carbide Laboratory Cutters | |
| Dental Rotary Instruments - Diamond Instruments - Part 1: Dimensions, Requirements, Marking and Packaging | |
| Dental rotary instruments - Diamond instruments - Part 2: Discs | |
| Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code | |
| Dental Rotary Instruments - Laboratory Abrasive Instruments | |
| Dental Units | |
| Dentistry - Evaluation of biocompatibility of medical devices used in dentistry | |
| Dentistry - Preclinical Evaluation of Biocompatibility of Medical Devices Used in Dentistry - Test Methods for Dental Materials | |
| Dentistry - Test methods for rotary instruments | |
| Dentistry \x97 Laboratory cutters Part 1: Steel laboratory cutters | |
| Dentistry \x97 Laboratory cutters Part 3: Carbide cutters for milling machines | |
| Dentistry Dental units Part 1: General requirements and test methods | |
| Dentistry Dental units Part 2: Water and air supply | |
| Design of Graphical Symbols for Use in the Technical Documentation of Products Part 1: Basic Rules | |
| Dried milk - Determination of content of lactic acid and lactates | |
| Dyestuffs - Determination of Solubility in Organic Solvents - Gravimetric Method | |
| Earth-moving machinery Laboratory evaluation of operator seat vibration | |
| Ergonomics Danger signals for public and work areas Auditory danger signals | |
| Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index | |
| Ergonomics of the thermal environment Analytical determination and interpretation of heat stress using calculation of the predicted heat strain | |
| Ergonomics of the thermal environment Instruments for measuring physical quantities | |
| Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification \x97 Test methods and data | |
| Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres \x97 Basic method and requirements | |
| Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres \x97 Non-electrical type of protection constructional safety \x93c\x94, control of ignition sources \x93b\x94, liquid immersion \x93k\x94 | |
| Fasteners - Slotted set screws with cone point | |
| Fasteners - Slotted set screws with cup point | |
| Fasteners - Slotted set screws with dog point | |
| Fasteners \x97 Prevailing torque hexagon nuts \x97 High nuts (all metal) with slot(s) | |
| Ferronickel shot - Sampling for analysis | |
| Ferronickels \x96 Determination of sulfur content \x96 Infrared absorption method after induction furnace combustion | |
| Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers | |
| Flexible cellular polmeric materials - Determination of tear strength | |
| Flexible Cellular Polymeric Materials - Determination of Resilience | |
| Gas cylinders - Precautionary labels | |
| Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing | |
| Gas cylinders \x97 Refillable seamless aluminium alloy gas cylinders \x97 Design, construction and testing | |
| Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) | |
| Gas Welding Equipment - Pressure Regulators for Manifold Systems Used in Welding, Cutting and Allied Processes up to 300 Bar | |
| General Methods of Test for Pigments - Part 19: Determination of Water-Soluble Nitrates (Salicylic Acid Method) | |
| General methods of test for pigments and extenders - Part 10: Determination of density - Pyknometer method | |
| General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping | |
| General Methods of Test for Pigments and Extenders - Part 13: Determination of Water-Soluble Sulfates, Chlorides and Nitrates | |
| General Methods of Test for Pigments and Extenders - Part 14: Determination of Resistivity of Aqueous Extract | |
| General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types | |
| General methods of test for pigments and extenders - Part 16: Determination of relative tinting strength (or equivalent colouring value) and colours on reduction of coloured pigments - Visual comparison... | |
| General methods of test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods | |
| General Methods of Test for Pigments and Extenders - Part 2: Determination of Matter Volatile at 105 Degrees C | |
| General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water - Hot extraction method | |
| General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water - Cold extraction method | |
| General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension | |
| General methods of test for pigments and extenders Part 17: Comparison of lightening power of white pigments | |
| General methods of test for pigments and extenders Part 1: Comparison of colour of pigments | |
| General methods of test for pigments and extenders Part 21: Comparison of heat stability of pigments using a stoving medium | |
| General methods of test for pigments and extenders Part 22: Comparison of resistance to bleeding of pigments | |
| General methods of test for pigments and extenders Part 4: Determination of acidity or alkalinity of the aqueous extract | |
| General methods of test for pigments and extenders Part 7: Determination of residue on sieve - Water method - Manual procedure | |
| General methods of tests for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) | |
| General methods of tests for pigments and extenders Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS | |
| Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary | |
| Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings | |
| Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules | |
| Glass containers - Determination of capacity by gravimetric method - Test method | |
| Glass containers - Internal pressure resistance - Test methods | |
| Glass containers Resistance to vertical load Test method | |
| Glass containers Thermal shock resistance and thermal shock endurance Test methods | |
| Graphical Symbols for Thermal Cutting Equipment | |
| Ground (powdered) paprika - Determination of total natural colouring matter content | |
| Ground paprika (Capsicum annuum L.) - Specification | |
| Hexagon Socket Button Head Screws | |
| Household Refrigerating Appliances - Refrigerators with or without Low Temperature Compartment - Characteristics and Test Methods | |
| Human response to vibration - Measuring instrumentation Part 2: Personal vibration exposure meters | |
| Human response to vibration \x97 Measuring instrumentation Part 1: General purpose vibration meters | |
| Human response to vibration Measuring instrumentation | |
| Humidifiers for Medical Use - General Requirements for Humidification Systems | |
| Hydrometric Determinations - Vocabulary and Symbols | |
| Leather - Tests for colour fastness - Colour fastness to hydroalcoholic mixtures | |
| Leather - Tests for colour fastness - General principles of testing | |
| Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers | |
| Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank | |
| Measurement of Liquid Flow in Open Channels - Velocity-Area Methods | |
| Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation | |
| Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors | |
| Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement | |
| Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators | |
| Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation | |
| Medical electrical equipment Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors | |
| Medical electrical equipment Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement | |
| Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment | |
| Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment | |
| Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment | |
| Medical electrical equipment Part 2-70: Particular requirements for the basic safety and essential performance of sleep apnoea breathing therapy equipment | |
| Medical electrical equipment Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients | |
| Medical electrical equipment Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment | |
| Medical electrical equipment Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment | |
| Medical electrical equipment Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency | |
| Medical electrical equipment Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment | |
| Medical electrical equipment Part 2-85: Particular requirements for the basic safety and essential performance of cerebral tissue oximeter equipment | |
| Medical electrical equipment Part 2-87: Particular requirements for basic safety and essential performance of high-frequency ventilators | |
| Medical electrical equipment Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment | |
| Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum | |
| Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems | |
| Medical gas pipeline systems Part 3: Proportioning units for the production of synthetic medical air | |
| Metallic Materials - Bend Test | |
| Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test | |
| Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of the Force-Measuring System | |
| Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 2: Tension Creep Testing Machines - Verification of the Applied Load | |
| Methods for Testing pigments for paints - Part A7: Colorimetric method for the comparison of the colours, in full-shade systems, of white, black and coloured pigments | |
| Methods of Test for Paints - Part 1: Determination of Water-Vapour Transmission Rate of Free Films (Dish Method) | |
| Microbiology - General Guidance for the Enumeration of Bacillus Cereus Colony-Count Technique at 30 Degrees C | |
| Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of presumptive Bacillus cereus - Colony-count technique at 30 \xb0C | |
| Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of Clostridium perfringens Colony-count technique | |
| Milk and Milk Products - General Guidance for the Preparation of Test Samples, Initial Suspensions and Decimal Dilutions for Microbiological Examination | |
| Milk Based Edible Ices and Ice Mixes - Determination of Fat Content - Gravimetric Method (Reference Method) | |
| Moderate Thermal Environments - Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort | |
| Nanotechnologies - Vocabulary Part 1: Core vocabulary | |
| Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components | |
| Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 | |
| Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type | |
| Non-invasive sphygmomanometers Part 2: Clinical investigation of automated measurement type | |
| Non-invasive sphygmomanometers Part 2: Clinical investigation of intermittent automated measurement type | |
| Non-invasive sphygmomanometers Part 3: Clinical investigation of continuous automated measurement type | |
| Nuclear criticality safety \x97 Use of criticality accident alarm systems for operations | |
| Nuclear fuel technology \x97 Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry | |
| Oilseed meals \x97 Determination of oil content \x97 Extraction method with hexane (or light petroleum) | |
| Oilseed Residues - Determination of Oil Content - Part 1: Extraction Method with Hexane (or Light Petroleum) | |
| Oilseed Residues - Determination of Oil Content - Part 2: Rapid Extraction Method | |
| Ophthalmic Optics - Specifications for Material, Optical and Dimensional Properties of Contact Lenses - Part 1: Rigid Corneal and Scleral Contact Lenses | |
| Ophthalmic Optics - Specifications for Material, Optical and Dimensional Properties of Contact Lenses - Part 2: Single-Vision Hydrogel Contact Lenses | |
| Ophthalmic optics and instruments - Near reading charts | |
| Optics and Optical Instruments - Reference Wavelengths | |
| Optics and optical instruments. Spectacle frames. Vocabulary and lists of equivalent terms | |
| Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency | |
| Packaging - Drop test Part 1: Paper sacks | |
| Packaging - Pictorial Marking for Handling of Goods | |
| Paints and Varnishes - Coating Materials and Coating Systems for Exterior Masonary and Concrete - Part 2: Determination and Classification of Water-Vapour Transmission Rate (Permeability) | |
| Paints and Varnishes - Determination of Reisitance to Neutral Salt Spray (Fog) | |
| Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-cover ed wheel method | |
| Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method | |
| Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method | |
| Paints and varnishes - Determination of water-vapour transmission properties - Cup method | |
| Paints, varnishes and binders Methods of test for characterizing water-based coating materials and binders | |
| Paper and board - Measurement of specular gloss - Part 1: 75\xb0 gloss with a converging beam, TAPPI method | |
| Paper and board - Measurement of specular gloss - Part 2: 75 degrees gloss with a parallel beam, DIN method | |
| Petroleum measurement systems - Calibration - Temperature corrections for use with volumetric reference measuring systems | |
| Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) | |
| Pipework - Metal hoses and hose assemblies - Vocabulary | |
| Plain Washers - Extra Large Series - Product Grade C | |
| Plain Washers - Large Series - Part 1: Product Grade A | |
| Plain Washers - Large Series - Part 2: Product Grade C | |
| Plain Washers - Normal Series - Product Grade A | |
| Plain Washers - Normal Series - Products Grade C | |
| Plain Washers - Small Series - Product Grade A | |
| Plain Washers, Chamfered - Normal Series - Product Grade A | |
| Plastics - Determination of temperature of deflection under load - Part 1: General test method | |
| Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforce d plastics | |
| Plastics - Determination of Tensile-Impact Strength | |
| Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride | |
| Plastics - Polycarbonate (PC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Polycarbonate (PC) Moulding and Extursion Materials - Part 1: Designation System and Basis for Specifications | |
| Plastics - Thermosetting Moulding Materials - Determination of Transfer Flow | |
| Plastics \x97 Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics Determination of temperature of deflection under load Part 2: Plastics, ebonite and long-fibre-reinforce d composites | |
| Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods | |
| Plastics Film and sheeting Determination of the coefficients of friction | |
| Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification | |
| Plastics pipes and fittings - Determination of opacity | |
| Plastics piping systems \x97 Glass-reinforced plastics (GRP) components \x97 Determination of the amounts of constituents | |
| Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics Poly(Methyl Methacrylate) Sheets - Types, Dimensions and Characteristics Part 2: Melt-Calendered Extruded Sheets | |
| Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets | |
| Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Pneumatic cylinders for mechanized multiple spot welding | |
| Poly (Methyl Methacrylate) Sheets - Types, Dimensions and Characteristics Part 1: Cast Sheets | |
| Polymeric Materials, Cellular Flexible - Method of Assessment of Air Flow Value at Constant Pressure-Drop | |
| Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 | |
| Proving systems for meters used in dynamic measurement of liquid hydrocarbons - Part 1: Introduction | |
| Pulps - Determination of Saleable Mass in Lots - Part 1: Pulp Baled in Sheet Form | |
| Pulps - Determination of Saleable Mass in Lots - Part 3: Unitized Bales | |
| Pulps - Sampling for testing | |
| Quantities and units - Part 3: Space and time | |
| Quantities and units - Part 4: Mechanics | |
| Quantities and units - Part 8: Acoustics | |
| Quantities and units Part 10: Atomic and nuclear physics | |
| Quantities and units Part 11: Characteristic numbers | |
| Quantities and units Part 12: Condensed matter physics | |
| Quantities and units Part 12: Solid state physics | |
| Quantities and units Part 1: General | |
| Quantities and units Part 2: Mathematical signs and symbols to be used in the natural sciences and technology | |
| Quantities and units Part 3: Space and time | |
| Quantities and units Part 4: Mechanics | |
| Quantities and units Part 5: Thermodynamics | |
| Quantities and units Part 8: Acoustics | |
| Quantities and units Part 9: Physical chemistry and molecular physics | |
| Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 6: Report of Measuring Results and Tests | |
| Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 1: Test-Bed Measurement of Gaseous and Particulate Exhaust Emissions | |
| Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site | |
| Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 4: Test Cycles for Different Engine Applications | |
| Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 5: Test Fuels | |
| Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement | |
| Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings | |
| Resistance welding \x97 Embossed projection welding \x97 Projections for resistance welding | |
| Resistance Welding Equipment - Particular Specifications Applicable to Transformers with Two Separate Secondary Windings for Multi-Spot Welding as Used in the Automobile Industry | |
| Resistance welding equipment - Water-cooled secondary connection cables | |
| Rice - Specification | |
| Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 1: Tabs for Single-Pole Connections - Dimensions and Specific Requirements | |
| Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 2: Definitions, Test Methods and General Performance Requirements | |
| Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 3: Tabs for Multi-Pole Connections - Dimensions and Specific Requirements | |
| Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 4: Pins for Single- and Multi-Pole Connections - Dimensions and Specific Requirements | |
| Rubber and Plastics Hose Assemblies - Flexing Combined with Hydraulic Impulse Test (Half-Omega Test) | |
| Rubber and plastics hoses - Assessment of ozone resistance under static conditions | |
| Rubber and Plastics Hoses - Determination of Abrasion of Lining | |
| Rubber and Plastics Hoses - Method of Test for Flammability | |
| Rubber and plastics hoses and hose assemblies - Determination of suction resistance | |
| Rubber and Plastics Hoses and Hose Assemblies - Ratios of Proof and Burst Pressure to Design Working Pressure | |
| Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure | |
| Rubber and Plastics Hoses and Hose Assemblies - Vocabulary | |
| Rubber and plastics hoses and hose assemblies. Determination of electrical resistance | |
| Rubber and Plastics Hoses and Tubing - Determination of Transmission of Liquids Through Hose and Tubing Walls | |
| Rubber and plastics hoses Determination of adhesion between components | |
| Rubber and/or Plastics Hose Assemblies for Airless Paint Spraying - Specification | |
| Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Damage by Flexing | |
| Sacks - Drop Test Part 2: Sacks Made from the Thermoplastic Flexible Film | |
| Safety requirements for dry-cleaning machines Part 1: Common safety requirements | |
| Safety requirements for dry-cleaning machines Part 2: Machines using perchloroethylene | |
| Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents | |
| Safety Requirements for Dry-Cleaning Machines Using Perchloroethylene | |
| Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations | |
| Ships and marine technology \x97 Inland navigation vessels \x97 Mounting attachments for demountable signal masts for push-tows | |
| Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content | |
| Skimmed Milk, Whey and Buttermilk - Determination of Fat Content - Gravimetric Method (Reference Method) | |
| Small bore connectors for liquids and gases in healthcare applications Part 1: General requirements | |
| Small bore connectors for liquids and gases in healthcare applications Part 6: Connectors for neuraxial applications | |
| Small Craft - Fire Resistant Fuel Hoses | |
| Small craft - Toilet waste retention systems | |
| Small craft \x96 Waste systems Part 1: Waste water retention | |
| Small craft \x97 Waste systems Part 2: Sewage treatment systems | |
| Small-bore connectors for liquids and gases in healthcare applications Part 20: Common test methods | |
| Small-bore connectors for liquids and gases in healthcare applications Part 2: Connectors for respiratory applications | |
| Small-bore connectors for liquids and gases in healthcare applications Part 3: Connectors for enteral applications | |
| Small-bore connectors for liquids and gases in healthcare applications Part 7: Connectors for intravascular or hypodermic applications | |
| Steel cord conveyor belts - Cord-to-coating bond test - Initial test after thermal treatment | |
| Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation | |
| Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength | |
| Steel cord conveyor belts \x97 Adhesion strength test of the cover to the core layer | |
| Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness | |
| Sterile Hypodermic Needles for Single Use | |
| Sterile hypodermic syringes for single use - Part 1: Syringes for manual use | |
| Sterile Hypodermic Syringes for Single Use - Part 2. Syringes for Use with Power-Driven Syringe Pumps | |
| Sterile hypodermic syringes for single use Part 3: Auto-disable syringes for fixeddose immunization | |
| Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature | |
| Sterile, Single-Use Dental Injection Needles | |
| Surgical Instruments - Metallic Materials - Part 1: Stainless Steel | |
| Technical Drawings - Construction Drawings - General Pricnciples of Presentation for General Arrangement and Assembly Drawings | |
| Technical Drawings - Construction Drawings - General Rules for Execution of Production Drawings for Prefabricated Structural Components | |
| Technical product documentation (TPD) - Identification of specifications in the technical product documentation (TPD) | |
| Technical product documentation (TPD) - Unique integral feature identification (UIFI) | |
| Technical product documentation \x97 Data fields in title blocks and document headers | |
| Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical Counting Methods | |
| Textiles - Determination of resistance to water penetration - Hydrostatic pressure test | |
| Textiles - Methods for analysis of woven fabrics construction Part 2: Determination of number of threads per unit length | |
| Thermal Insulation - Physical Quantities and Definitions | |
| Thermoplastics valves \x97 Torque \x97 Test method | |
| Tracked Changes (Redline) - Acoustics - Audiometric test methods - Part 3: Speech audiometry | |
| Tracked Changes (Redline) - Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment | |
| Tracked Changes (Redline) - Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings | |
| Tracked Changes (Redline) - Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60... | |
| Tracked Changes (Redline) - Basic human body measurements for technological design Part 1: Body measurement definitions and landmarks | |
| Tracked Changes (Redline) - Binders for paints and varnishes - Epoxy resins - General methods of test | |
| Tracked Changes (Redline) - Building Information Modelling - Level of Information Need - Part 1: Concepts and principles | |
| Tracked Changes (Redline) - Cardiovascular implants and artificial organs \x97 Blood-gas exchangers (oxygenators) | |
| Tracked Changes (Redline) - Cereals \x96 Determination of bulk density, called mass per hectoliter Part 3: Routine method | |
| Tracked Changes (Redline) - Cereals \x96 Determination of bulk density, called mass per hectolitre Part 2: Method of traceability for measuring instruments through reference to the international standard instrument | |
| Tracked Changes (Redline) - Cereals and cereal products - Determination of moisture content - Part 1: Reference method | |
| Tracked Changes (Redline) - Child-resistant packaging \x97 Requirements and testing procedures for reclosable packages | |
| Tracked Changes (Redline) - Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) | |
| Tracked Changes (Redline) - Coating powders - Part 4: Calculation of lower explosion limit | |
| Tracked Changes (Redline) - Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature | |
| Tracked Changes (Redline) - Coating powders \x97 Part 10: Determination of deposition efficiency | |
| Tracked Changes (Redline) - Coating powders \x97 Part 3: Determination of density by liquid displacement pyknometer | |
| Tracked Changes (Redline) - Coating powders \x97 Part 5: Determination of flow properties of a powder/air mixture | |
| Tracked Changes (Redline) - Coating powders \x97 Part 8: Assessment of the storage stability of thermosetting powders | |
| Tracked Changes (Redline) - Coating powders Part 11: Inclined-plane flow test | |
| Tracked Changes (Redline) - Coating powders Part 12: Determination of compatibility | |
| Tracked Changes (Redline) - Coating powders Part 13: Particle size analysis by laser diffraction | |
| Tracked Changes (Redline) - Coating powders Part 14: Vocabulary | |
| Tracked Changes (Redline) - Coating powders Part 1: Determination of particle size distribution by sieving | |
| Tracked Changes (Redline) - Coating powders Part 7: Determination of loss of mass on stoving | |
| Tracked Changes (Redline) - Copper-bearing contraceptive intrauterine devices \x97 Requirements and tests | |
| Tracked Changes (Redline) - Corrosion of metals and alloys - Basic terms and definitions | |
| Tracked Changes (Redline) - Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement... | |
| Tracked Changes (Redline) - Corrosion of metals and alloys \x97 Determination of bimetallic corrosion in atmospheric exposure corrosion tests | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles for young children | |
| Tracked Changes (Redline) - Dentistry - Dental explorer | |
| Tracked Changes (Redline) - Dentistry - Diamond rotary instruments - Part 1: General requirements | |
| Tracked Changes (Redline) - Dentistry - Endodontic absorbent points | |
| Tracked Changes (Redline) - Dentistry - Stationary dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems | |
| Tracked Changes (Redline) - Dentistry - Test methods for rotary instruments | |
| Tracked Changes (Redline) - Dentistry \x96 Laboratory cutters Part 2: Carbide laboratory cutters | |
| Tracked Changes (Redline) - Dentistry \x97 Evaluation of biocompatibility of medical devices used in dentistry | |
| Tracked Changes (Redline) - Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain | |
| Tracked Changes (Redline) - Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria... | |
| Tracked Changes (Redline) - Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar | |
| Tracked Changes (Redline) - Fasteners - Prevailing torque hexagon nuts - High nuts (all metal) with slot(s) | |
| Tracked Changes (Redline) - Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal) | |
| Tracked Changes (Redline) - Fasteners - Slotted set screws with cup point | |
| Tracked Changes (Redline) - Fasteners - Slotted set screws with dog point | |
| Tracked Changes (Redline) - Fasteners \x97 Button head screws with reduced loadability \x97 Part 1: Hexagon socket button head screws | |
| Tracked Changes (Redline) - Fasteners \x97 Slotted set screws with cone point | |
| Tracked Changes (Redline) - Ferronickels \x96 Determination of sulfur content \x96 Infrared absorption method after induction furnace combustion | |
| Tracked Changes (Redline) - Flexible cellular polymeric materials - Determination of resilience by ball rebound | |
| Tracked Changes (Redline) - Flexible cellular polymeric materials - Determination of tear strength | |
| Tracked Changes (Redline) - General methods of test for pigments and extenders Part 14: Determination of resistivity of aqueous extract | |
| Tracked Changes (Redline) - General methods of test for pigments and extenders Part 17: Comparison of lightening power of white pigments | |
| Tracked Changes (Redline) - General methods of test for pigments and extenders Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method... | |
| Tracked Changes (Redline) - General methods of test for pigments and extenders Part 9: Determination of pH value of an aqueous suspension | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts Part 3: General dimensional and geometrical tolerances and machining allowances for castings using \xb1... | |
| Tracked Changes (Redline) - Human response to vibration - Measuring instrumentation Part 1: General purpose vibration meters | |
| Tracked Changes (Redline) - Hydrometry - Vocabulary and symbols | |
| Tracked Changes (Redline) - Hydrometry \x97 Measurement of liquid flow in open channels \x97 Velocity area methods using point velocity measurements | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency | |
| Tracked Changes (Redline) - Medical electrical equipment \x97 Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators | |
| Tracked Changes (Redline) - Medical electrical equipment Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement | |
| Tracked Changes (Redline) - Medical electrical equipment Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients | |
| Tracked Changes (Redline) - Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum | |
| Tracked Changes (Redline) - Metallic materials \x96 Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines \x96 Calibration and verification of the force-measuring system | |
| Tracked Changes (Redline) - Metallic materials \x97 Bend test | |
| Tracked Changes (Redline) - Microbiology of the food chain \x97 General requirements and guidance for microbiological examinations | |
| Tracked Changes (Redline) - Neurosurgical implants - Sterile, single-use hydrocephalus shunts | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 | |
| Tracked Changes (Redline) - Oilseed meals \x97 Determination of oil content \x97 Extraction method with hexane (or light petroleum) | |
| Tracked Changes (Redline) - Optics and photonics - Reference wavelengths | |
| Tracked Changes (Redline) - Packaging - Drop test - Part 1: Paper sacks | |
| Tracked Changes (Redline) - Packaging \x97 Distribution packaging \x97 Graphical symbols for handling and storage of packages | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of resistance to abrasion Part 2: Method with abrasive rubber wheels and rotating test specimen | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of resistance to abrasion Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of water-vapour transmission properties - Cup method | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Determination of resistance to abrasion Part 1: Method with abrasive-paper covered wheels and rotating test specimen | |
| Tracked Changes (Redline) - Plastics \x96 Determination of temperature of deflection under load Part 1: General test method | |
| Tracked Changes (Redline) - Plastics \x97 Determination of temperature of deflection under load \x97 Part 3: High-strength thermosetting laminates and long-fibre-reinforce d plastics | |
| Tracked Changes (Redline) - Plastics \x97 Determination of tensile-impact strength | |
| Tracked Changes (Redline) - Plastics \x97 Poly(methyl methacrylate) sheets \x97 Types, dimensions and characteristics \x97 Part 3: Continuous cast sheets | |
| Tracked Changes (Redline) - Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop | |
| Tracked Changes (Redline) - Pulps - Sampling for testing | |
| Tracked Changes (Redline) - Quantities and units Part 1: General | |
| Tracked Changes (Redline) - Resistance welding \x97 Embossed projection welding \x97 Projections for resistance welding | |
| Tracked Changes (Redline) - Rubber and plastics hoses - Determination of adhesion between components | |
| Tracked Changes (Redline) - Rubber and plastics hoses \x97 Assessment of ozone resistance under static conditions | |
| Tracked Changes (Redline) - Rubber and plastics hoses and hose assemblies - Vocabulary | |
| Tracked Changes (Redline) - Rubber and plastics hoses and hose assemblies \x97 Determination of resistance to vacuum | |
| Tracked Changes (Redline) - Rubber and plastics hoses and hose assemblies \x97 Ratios of proof and burst pressure to maximum working pressure | |
| Tracked Changes (Redline) - Rubber and plastics hoses and tubing \x97 Determination of transmission of liquids through hose and tubing walls | |
| Tracked Changes (Redline) - Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification | |
| Tracked Changes (Redline) - Small bore connectors for liquids and gases in healthcare applications \x97 Part 6: Connectors for neural applications | |
| Tracked Changes (Redline) - Small craft - Fire-resistant fuel hoses | |
| Tracked Changes (Redline) - Small craft \x96 Waste systems Part 1: Waste water retention | |
| Tracked Changes (Redline) - Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods | |
| Tracked Changes (Redline) - Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements | |
| Tracked Changes (Redline) - Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment | |
| Tracked Changes (Redline) - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength | |
| Tracked Changes (Redline) - Steel cord conveyor belts \x96 Methods for the determination of total thickness and cover thickness | |
| Tracked Changes (Redline) - Sterile hypodermic needles for single use - Requirements and test methods | |
| Tracked Changes (Redline) - Surgical instruments \x97 Materials Part 1: Metals | |
| Tracked Changes (Redline) - Technical product documentation (TPD) - Construction documentation - General principles of presentation for general arrangement and assembly drawings | |
| Tracked Changes (Redline) - Textiles - Methods for analysis of woven fabrics construction - Part 2: Determination of number of threads per unit length | |
| Tracked Changes (Redline) - Thermal performance of buildings and building components - Physical quantities and definitions | |
| Tracked Changes (Redline) - Thermoplastics valves - Torque - Test method | |
| Tracked Changes (Redline) - Water quality \x96 General requirements and guidance for microbiological examinations by culture | |
| Tracked Changes (Redline) - Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals | |
| Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods | |
| Ultramarine pigments | |
| Vitreous and Porcelain Enamels - Determination of Resistance to Sulfuric Acid at Room Temperature | |
| Vitreous and porcelain enamels - Method of test of self-cleaning properties | |
| Vitreous and porcelain enamels \x96 Low-voltage test for detecting and locating defects Part 1: Swab test for non-profiled surfaces | |
| Vitreous and porcelain enamels \x96 Low-voltage test for detecting and locating defects Part 2: Slurry test for profiled surfaces | |
| Vitreous and Porcelsin Enamels - Low Voltage Test for Detecting and Locating Defects | |
| Water Quality - Detection and Enumeration of Intestinal Enterococci - Part 2: Membrane Filtration Method | |
| Water Quality - Detection and Enumeration of Intestinal Enterococci in Surface and Waste Water - Part 1: Miniaturized Method (Most Probable Number) by Inoculation in Liquid Medium | |
| Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method | |
| Water Quality - Determination of Free Chlorine and Total Chlorine - Part 1: Titrimetric Method Using N,N-Diethyl-1,4-Phen ylenediamine | |
| Water Quality - Determination of Free Chlorine and Total Chlorine - Part 2: Calorimetric Method Using N,N-Diethyl-1,4-Phen ylenediamine, for Routine Control Purposes | |
| Water Quality - Determination of Free Chlorine and Total Chlorine - Part 3: Iodometric Titration Method for the Determination of Total Chlorine | |
| Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Fresh Water Fish [Brachydanio Rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Flow-Through Method | |
| Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Fresh Water Fish [Brachydanio Rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Semi-Static Method | |
| Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Fresh Water Fish [Brachydanio Rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Static Method | |
| Water quality - Enumeration of intestinal enterococci Part 3: Most probable number method | |
| Water quality - Examination and determination of colour | |
| Water quality - General guidance on the enumeration of micro-organisms by culture | |
| Water quality - Requirements for the performance testing of membrane filters used for direct enumeration of microorganisms by culture methods | |
| Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation | |
| Water quality Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) | |
| Water-Cooled Secondary Connection Cables for Resistance Welding Part 1: Dimensions and Requirements for Double-Conductor Connection Cables | |
| Water-Cooled Secondary Connection Cables for Resistance Welding Part 2: Dimensions and Requirements for Single-Conductor Connection Cables | |
| Water-Cooled Secondary Connection Cables for Resistance Welding Part 3: Test Requirements | |
| Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austentic Cr-Ni Stainless Steel Weld Metals |
| << Prev | Next >> |