Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
320
330
340
350
360
370
378
379
380
381
382
383
384
385
386
387
388
389
390
400
410
420
430
440
450
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | |
| Acoustics - Statistical Distribution of Hearing Thresholds as a Function of Age | |
| Acoustics - Statistical distribution of hearing thresholds related to age and gender | |
| Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | |
| Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes | |
| Animal and Vegetable Fats and Oils - Analysis by Gas Chromatography of Methyl Esters of Fatty Acids | |
| Animal and Vegetable Fats and Oils - Determination of Acid Value and Acidity | |
| Animal and Vegetable Fats and Oils - Determination of Ansidine Value | |
| Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) | |
| Animal and Vegetable Fats and Oils - Determination of Insoluble Impurities Content | |
| Animal and Vegetable Fats and Oils - Determination of Melting Point in Open Capillary Tubes (Slip Point) | |
| Animal and Vegetable Fats and Oils - Determination of Moisture and Volatile Matter Content | |
| Animal and vegetable fats and oils - Determination of oxidative stability (accelerated oxidation test) | |
| Animal and Vegetable Fats and Oils - Determination of Refractive Index | |
| Animal and Vegetable Fats and Oils - Determination of the Composition of Fatty Acids in the 2-Position of the Triglyceride Molecules | |
| Animal and Vegetable Fats and Oils - Preparation of Methyl Esters of Fatty Acids | |
| Animal and Vegetable Fats and Oils - Preparation of Test Sample | |
| Animal and Vegetable Fats and Oils - Sampling | |
| Animal Feeding Stuffs - Determination of the Contents of Calcium, Copper, Iron, Magnesium, Manganese, Potassium, Sodium and Zinc - Method Using Atomic Absorption Spectrometry | |
| Animal Feeding Stuffs - Determination of Vitamin E Content - Method Using High-Performance Liquid Chromatography | |
| Animal feeding stuffs - Guidelines for sample preparation | |
| Animal feeding stuffs Determination of nitrogen content and calculation of crude protein content Part 1: Kjeldahl method | |
| Animal feeding stuffs Determination of nitrogen content and calculation of crude protein content Part 2: Block digestion/steam distillation method | |
| Animal feeding stuffs Sampling | |
| Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings | |
| Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments | |
| Arc welding and cutting - Nonconsumable tungsten electrodes - Classification | |
| Assembly tools for screws and nuts \x97 Hand torque tools Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance | |
| Assembly tools for screws and nuts \x97 Hand torque tools Part 2: Requirements for calibration and determination of measurement uncertainty | |
| Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure | |
| Automatic steam traps \x97 Marking | |
| Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content | |
| Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content | |
| Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content | |
| Binders for paints and varnishes \x97 Alkyd resins \x97 Part 1: General methods of test | |
| Bonded Abrasive Products - Permissible Unbalances of Grinding Wheels as Delivered - Testing | |
| Building Components and Building Elements - Thermal Resistance and Thermal Transmittance - Calculation Method | |
| Buildings and civil engineering works - Sealants - Vocabulary | |
| Camping tents | |
| Cardiovascular implants - Cardiac valve prostheses Part 1: General requirements | |
| Cardiovascular implants - Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes | |
| Cardiovascular implants - Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques | |
| Cardiovascular implants \x97 Cardiac valve prostheses Part 1: General requirements | |
| Cardiovascular implants \x97 Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes | |
| Cardiovascular implants Cardiac valve prostheses | |
| Cereals - Vocabulary | |
| Cereals, pulses and other food grains | |
| Cheese and processed cheese Determination of the total solids content (Reference method) | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method | |
| Chemical analysis of steel \x97 Order of listing elements in steel standards | |
| Clear liquids \x97 Estimation of colour by the platinum-cobalt colour scale | |
| Clear liquids Estimation of colour by the platinum-cobalt scale Part 1: Visual method | |
| Clear liquids Estimation of colour by the platinum-cobalt scale Part 2: Spectrophotometric method | |
| Connections for fluid power and general use \x97 Ports and stud ends with ISO 261 metric threads and O-ring sealing \x97 Part 4: Dimensions, design, test methods and requirements for... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements... | |
| Construction Drawings - Indication of Limit Deviations | |
| Conveyor belts - Transverse flexibility (troughability) - Test method | |
| Conveyor Belts - Transverse Flexibility and Troughability - Part 1: Test Method | |
| Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods | |
| Conveyor Belts with a Textile Carcass - Total Thickness and Thickness of Elements - Part 1: Methods of Test | |
| Corrosion of Metals and Alloys - Determination of Dezincification Resistance of Brass | |
| Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc Part 1: Test method | |
| Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel of Property Class 4.8 | |
| Cross Recessed Cheese Head Screws | |
| Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless Steel and Non-Ferrous Metals | |
| Cross-recessed countersunk (flat) head tapping screws | |
| Cross-recessed pan head tapping screws | |
| Cross-recessed raised countersunk (oval) head tapping screws | |
| Dental Base Metal Casting Alloys Part 1: Cobalt-Based Alloys | |
| Dental Base Metal Casting Alloys Part 2: Nickel-Based Alloys | |
| Dental Ceramic | |
| Dental Equipment - Dental Patient Chair | |
| Dental gypsum products | |
| Dental root canal sealing materials | |
| Dental Root-Canal Obturating Points | |
| Dentistry - Ceramic materials | |
| Dentistry - Number coding system for rotary instruments - Part 2: Shapes | |
| Dentistry - Number Coding System for Rotary Instruments - Part 3: Specific Characteristics of Burs and Cutters | |
| Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments | |
| Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments | |
| Dentistry \x97 Number coding system for rotary instruments \x97 Part 4: Specific characteristics of diamond instruments | |
| Dentistry \x97 Number coding system for rotary instruments \x97 Part 6: Specific characteristics of abrasive instruments | |
| Dentistry Number coding system for rotary instruments Part 1: General characteristics | |
| Dentistry Number coding system for rotary instruments Part 2: Shapes | |
| Dentistry Polymer-based pit and fissure sealants | |
| Dried milk Determination of moisture content (Reference method) | |
| Earth-Moving Machinery - Basic Types - Vocabulary | |
| Earth-Moving Machinery - Seat Belts and Seat Belt Anchorages | |
| Earth-moving machinery - Zones of comfort and reach for controls | |
| Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide | |
| Ergonomic principles in the design of work systems | |
| Fans - Performance testing using standardized airways | |
| Fans for general purpose - Part 3: Performance testing in situ | |
| Fasteners - Prevailing torque hexagon nuts - High nuts (with non-metallic insert) | |
| Fasteners - Surface discontinuities - Part 2: Nuts | |
| Ferronickel - Specification and delivery requirements | |
| Fish-meal - Vocabulary | |
| Flowing cereals and milled cereal products - Automatic sampling by mechanical means | |
| Freight Containers - Coding, Identification and Marking | |
| Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures | |
| Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers | |
| Gas analysis - Preparation of calibration gas mixtures - Gravimetric method | |
| Gas analysis - Preparation of calibration gas mixtures - Static volumetric method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods Part 5: Capillary calibration devices | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods Part 7: Thermal mass-flow controllers | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods Part 9: Saturation method | |
| Gas analysis - Requirements for certificates for calibration gases and gas mixtures | |
| Gas analysis \x97 Contents of certificates for calibration gas mixtures | |
| Gas analysis \x97 Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures | |
| Gas analysis \x97 Preparation of calibration gas mixtures using dynamic volumetric methods \x97 Part 11: Electrochemical generation | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs | |
| Graphical symbols \x97 Safety colours and safety signs \x97 Registered safety signs | |
| Heat treatable steels, alloy steels and free-cutting steels Part 5: Nitriding steels | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels | |
| Heat-treatable steels, alloy steels and free-cutting steels Part 7: Bright products of non-alloy and alloy steels | |
| Heat-Treated Steels, Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels | |
| Hexagon washer head tapping screws | |
| Hydrometry - Measurement of discharge by the ultrasonic (acoustic) method | |
| Hypodermic Needles for Single Use - Colour Coding for Identification | |
| Ice makers for commercial use - Classification, requirements and test conditions | |
| Implants for surgery - Metallic materials - Part 2: Unalloyed titanium | |
| Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy | |
| Implants for surgery - Metallic materials Part 1: Wrought stainless steel | |
| Implants for surgery - Metallic materials Part 6: Wrought cobalt-nickel-chromi um-molybdenum alloy | |
| Implants for surgery \x97 Metallic materials Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron alloy | |
| In vitro diagnostic medical devices - Single-use containers for the collection of specimens from humans other than blood | |
| Industrial fans - Performance testing in situ | |
| Industrial fans - Performance testing using standardized airways | |
| Industrial valves - Mounting kits for part-turn valve actuator attachment | |
| Inflatable Boats - Part 1: Boats with a Maximum Motor Power Rating of 4,5 kW | |
| Inflatable Boats - Part 2: Boats with a Maximum Motor Power Rating of 4,5 kW to 15 kW Inclusive | |
| Inflatable Boats - Part 3: Boats with a Maximum Motor Power Rating of 15 kW and Greater | |
| Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater | |
| Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions | |
| Innovation management - Tools and methods for innovation operation measurements - Guidance | |
| Innovation management - Tools and methods for intellectual property management - Guidance | |
| Innovation management - Tools and methods for managing opportunities and ideas - Guidance | |
| Innovation management \x97 Fundamentals and vocabulary | |
| Innovation management \x97 Innovation management system \x97 Guidance | |
| Innovation management \x97 Tools and methods for innovation partnership \x97 Guidance | |
| Innovation management system - Requirements | |
| Laboratory glassware - Filter flasks | |
| Laboratory glassware - Single-volume pipettes | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) | |
| Maize - Determination of moisture content (on milled grains and on whole grains) | |
| Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters | |
| Mechanical and Performance Requirements of Case Hardened and Tempered Metric Thread Rolling Screws | |
| Medical laboratories - Concepts and specifications for the design, development, implementation, and use of laboratory-developed tests | |
| Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture | |
| Metallic coatings Electrodeposited coatings of chromium for engineering purposes | |
| Metallic Materials - Brinell Hardness Test - Part 1: Test Method | |
| Metallic Materials - Brinell Hardness Test - Part 2: Verification and Calibration of Brinell Hardness Testing Machines | |
| Metallic Materials - Brinell Hardness Test - Part 3: Calibration of Reference Blocks | |
| Metallic Materials - Rockwell Hardness Test - Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N, T) | |
| Metallic Materials - Rockwell Hardness Test - Part 2: Verification and Calibration of Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T) | |
| Metallic Materials - Rockwell Hardness Test - Part 3: Calibration of Reference Blocks (Scales A, B, C, D, E, F, G, H, K, N, T) | |
| Metallic materials - Tensile testing Part 1: Method of test at ambient temperature | |
| Metallic materials - Tensile testing Part 2: Method of test at elevated temperature | |
| Metallic Materials - Vickers Hardmess Test Part 2: Verification of Testing Machines | |
| Metallic Materials - Vickers Hardness Test Part 1: Test Method | |
| Metallic Materials - Vickers Hardness Test Part 3: Calibration of Reference Blocks | |
| Metallic materials - Vickers hardness tests Part 4: Tables of hardness values | |
| Metallic materials \x97 Tensile testing Part 3: Method of test at low temperature | |
| Metallic materials Brinell hardness test Part 4: Table of hardness values | |
| Microbiology of food and animal feed - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 6: Specific rules for the preparation of samples taken at... | |
| Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection of Salmonella spp | |
| Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci (Staphylococcus Aureus and other Species) - Part 1: Technique Using Baird-Parker Agar Medium | |
| Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Enumeration of Coagulase-Positive Staphylococci (Staphylococcus Aureus and other Species) - Part 2: Technique Using Rabbit Plasma Fibrinogen Agar... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 1: Technique using Baird-Parker agar medium | |
| Microbiology of Food and Animal Feeding Stuffs - Preparation of Test Samples, Initial Suspension and Decimal Dilutions for Microbiological Examination - Part 1: General Rules for the Preparation of the... | |
| Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products... | |
| Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 5: Specific rules for the preparation of milk and... | |
| Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 3: Detection and MPN technique for low numbers | |
| Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 2: Specific rules for the preparation of meat and meat... | |
| Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 3: Specific rules for the preparation of fish and fishery... | |
| Microbiology of food and animal feeding stuffs Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 4: Specific rules for the preparation of products other than... | |
| Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella Part 1: Detection of Salmonella spp. | |
| Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 1: Method using Baird-Parker agar medium | |
| Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 2: Method using rabbit plasma fibrinogen agar medium | |
| Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 1: General rules for the preparation of the initial suspension and... | |
| Microbiology of the food chain \x97 Horizontal method for the detection, enumeration and serotyping of Salmonella Part 1: Detection of Salmonella spp. | |
| Microbiology of the food chain \x97 Horizontal method for the detection, enumeration and serotyping of Salmonella Part 4: Identification of monophasic Salmonella Typhimurium (1,4,[5],12:i:-) by polymerase chain reaction (PCR) | |
| Microbiology of the food chain \x97 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 3: Specific rules for the preparation of fish and fishery products... | |
| Milk - Determination of Freezing Point - Thermistor Cryoscope Method (Reference Method) | |
| Milk and milk products - Detection of Salmonella spp. | |
| Milk and Milk Products - Guidance on Sampling | |
| Milk fat products \x97 Determination of water content \x97 Karl Fischer method | |
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition | |
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System Characteristics and Statistics for Processing of Data | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two... | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory... | |
| Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory... | |
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three... | |
| Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine | |
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods | |
| Natural Gas - Determination of Sulfur Compounds - Part 3: Determination of Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide Sulfur by Potentiometry | |
| Natural Gas - Determination of Sulfur Compounds - Part 5: Lingener Combustion Method | |
| Natural gas - Determination of sulfur compounds Part 1: General introduction | |
| Natural gas Determination of mercury Part 2: Sampling of mercury by amalgamation on gold/platinum alloy | |
| Natural gas Extended analysis Gas chromatographic method | |
| Non-destructive testing - Industrial radiographic illuminators - Minimum requirements | |
| Non-destructive testing - Ultrasonic testing - Vocabulary | |
| Non-destructive testing \x97 Radiographic testing of metallic materials using film and X- or gamma rays \x97 Basic rules | |
| Nuclear energy \x97 Reference beta-particle radiation Part 1: Methods of production | |
| Nuclear energy \x97 Reference beta-particle radiation Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field | |
| Nuclear energy \x97 Reference beta-particle radiation Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of... | |
| Oilseeds - Determination of Content of Impurities | |
| Oilseeds - Determination of Moisture and Volatile Matter Content | |
| Oilseeds - Determination of Oil Content (Reference Method) | |
| Oilseeds - Determination of Oil Content - Method Using Continuous-Wave Low-Resolution Nuclear Magnetic Resonance Spectrometry (Rapid Method) | |
| Oilseeds - Reduction of laboratory sample to test sample | |
| Packaging \x97 Vocabulary Part 1: Paper sacks | |
| Paints and varnishes - Bend test (conical mandrel) | |
| Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints | |
| Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate | |
| Paints and varnishes - Determination of preservatives in water-dilutable coating materials Part 1: Determination of in-can free formaldehyde | |
| Paints and varnishes - Determination of preservatives in water-dilutable coating materials Part 2: Determination of in-can total formaldehyde | |
| Paints and varnishes - Determination of preservatives in water-dilutable coating materials Part 3: Determination of in-can isothiazolinones with LC-UV and LC-MS | |
| Paints and varnishes - Determination of resistance to humidity (continuous condensation) | |
| Paints and Varnishes - Determination of Resistance to Humidity - Part 1: Continous Condensation | |
| Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter | |
| Paints and varnishes \x97 Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV) | |
| Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A | |
| Paper, board and pulps - Determination of dry matter content - Oven-drying method | |
| Paper, board, pulps and cellulosic nanomaterials \x97 Determination of dry matter content by oven-drying method Part 1: Materials in solid form | |
| Paper, board, pulps and cellulosic nanomaterials \x97 Determination of dry matter content by oven-drying method Part 2: Suspensions of cellulosic nanomaterials | |
| Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods Part 1: General procedures | |
| Performance of buildings \x97 Detection of heat, air and moisture irregularities in buildings by infrared methods Part 3: Qualifications of equipment operators, data analysts and report writers | |
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data | |
| Petroleum products \x97 Gum content of fuels \x97 Jet evaporation method | |
| Petroleum, petrochemical and natural gas industries - Dry gas sealing systems for axial, centrifugal, and rotary screw compressors and expanders | |
| Pipework Components - Definition and Selection of DN (Nominal Size) | |
| Plastic Hoses and Hose Assemblies for Suction and Low-Pressure Discharge of Petroleum Liquids - Specification | |
| Plastic Hoses, Textile-Reinforced, for Compressed Air - Specification | |
| Plastics - Determination of Apparent Density of Material That Can Be Poured from a Specified Funnel | |
| Plastics - Determination of Apparent Density of Moulding Material That Cannot Be Poured from a Specified Funnel | |
| Plastics - Determination of Compressive Properties | |
| Plastics - Determination of Dynamic Mechanical Properties Part 1: General Principles | |
| Plastics - Determination of Dynamic Mechanical Properties Part 2: Torsion-Pendulum Method | |
| Plastics - Determination of Dynamic Mechanical Properties Part 3: Flexural Vibration - Resonance-Curve Method | |
| Plastics - Determination of Environmental Stress Cracking (ESC) - Constant-Tensile-Str ess Method | |
| Plastics - Determination of Matter Extractable by Organic Solvents (Conventional Methods) | |
| Plastics - Determination of Multi-Axial Impact Behaviour of Rigid Plastics Part 1: Falling Dart Method | |
| Plastics - Determination of Multi-Axial Impact Behaviour of Rigid Plastics Part 2: Instrumented Puncture Test | |
| Plastics - Determination of Pourability | |
| Plastics - Determination of water absorption | |
| Plastics - Impact-Resistant Acrylonitrile/Styren e (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Impact-Resistant Acrylonitrile/Styren e (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials Part 1: Designation System and Basis for Specifications | |
| Plastics - Smoke generation - Part 1: Guidance on optical-density testing | |
| Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single Chamber Test | |
| Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content | |
| Plastics - Unsaturated Polyester Resins - Determination of Reactivity at 80 Degrees C (Conventional Method) | |
| Plastics Film and sheeting Determination of tear resistance Part 1: Trouser tear method | |
| Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method | |
| Plastics Homopolymer and copolymer resins of vinyl chloride Determination of residual vinyl chloride monomer Gas chromatographic method | |
| Plastics Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification | |
| Plastics piping and ducting systems \x97 Injection-moulded thermoplastics fittings \x97 Methods for visually assessing the effects of heating | |
| Polymeric materials, cellular flexible Polyurethane foam for load-bearing applications excluding carpet underlay Specification | |
| Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques | |
| Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12 | |
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 | |
| Protective Clothing - Protection Against Chemicals - Determination of Protective Clothing Materials to Permeation by Liquids and Gases | |
| Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids | |
| Protective clothing \x97 Protection against heat and fire \x97 Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat | |
| Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A | |
| Resistance spot welding \x97 Electrode adaptors, female taper 1:10 | |
| Resistance spot welding \x97 Male electrode caps | |
| Resistance welding - Resistance welding equipment - Mechanical and electrical requirements | |
| Resistance welding - Spot welding electrode caps | |
| Resistance Welding Equipment - Secondary Connecting Cables with Terminals Connected to Water-Cooled Lugs - Dimensions and Characteristics | |
| Resistance Welding Equipment - Transformers - General Specifications Applicable to All Transformers | |
| Reusable all-glass or metal-and-glass syringes for medical use - Part 2: Design, performance requirements and tests | |
| Rice - Determination of amylose content - Part 1: Reference method | |
| Rice - Determination of amylose content - Part 2: Routine methods | |
| Rubber and plastics hoses \x97 Determination of volumetric expansion | |
| Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing | |
| Rubber Hose and Hose Assemblies for Transferring Anhydrous Ammonia - Specification | |
| Rubber Hoses - Determination of Abrasion Resistance of the Outer Cover | |
| Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification | |
| Rubber hoses and hose assemblies for saturated steam Specification | |
| Rubber Hoses and Hose Assemblies for Use in Oil Burners - Specification | |
| Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing | |
| Rubber, Vulcanized or Thermoplastic - Rubber Sheets and Rubber-Coated Fabrics - Determination of Transmission Rate of Volatile Liquids (Gravimetric Technique) | |
| Rubber- or plastics-coated fabrics - Determination of blocking resistance | |
| Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Combined Shear Flexing and Rubbing | |
| Rubber- or plastics-coated fabrics - Determination of resistance to liquids | |
| Sensory analysis - Methodology - Paired comparison test | |
| Shipbuilding - Trawl Winches | |
| Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks Part 1: General Requirements | |
| Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks Part 2: Components | |
| Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class B | |
| Ships and Marine Technology - Positioning of Magnetic Compasses in Ships | |
| Ships and Marine Technology - Small Weathertight Steel Hatches | |
| Ships and Marine Technology - Weathertight Single-Leaf Steel Doors | |
| Single-use containers for human venous blood specimen collection | |
| Sintered metal materials - Specifications | |
| Sintered metal materials, excluding hardmetals \x97 Unnotched impact test piece | |
| Spices - Cumin (Cuminum cyminum L.) - Specification | |
| Spices and condiments - Botanical nomenclature | |
| Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) | |
| Stainless steels for springs Part 1: Wire | |
| Standard representation of geographic point location by coordinates | |
| Steel Hardenability Test by End Quenching (Jominy Test) | |
| Steels - Micrographic determination of the apparent grain size | |
| Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content | |
| Technical Drawings - Item References | |
| Technical Drawings - Representation of Splines and Serrations | |
| Technical Drawings - Requirements for Microcopying | |
| Technical Drawings - Screw Threads and Threaded Parts Part 1: General Conventions | |
| Technical Drawings - Screw Threads and Threaded Parts Part 2: Screw Thread Inserts | |
| Technical Drawings - Screw Threads and Threaded Parts Part 3: Simplified Representation | |
| Technical Drawings - Simplified Representation of Centre Holes | |
| Technical Drawings - Simplified Representation of Pipelines - Part 1: General Rules and Orthogonal Representation | |
| Technical Drawings - Simplified Representation of Pipelines Part 2: Isometric Projection | |
| Technical Drawings - Simplified Representation of Pipelines Part 3: Terminal Features of Ventilation and Drainage Systems | |
| Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1: General Principles | |
| Technical Drawings - Symbols for Geometrical Tolerancing Proportions and Dimensions | |
| Technical drawings for glassware | |
| Textile Fabrics - Burning Behaviour - Determination of Ease of Ignition of Vertically Oriented Specimens | |
| Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens | |
| Textiles - Domestic Washing and Drying Procedures for Textile Testing | |
| Textiles \x97 Natural fibres \x97 Generic names and definitions | |
| Thermoplastics pipes - Determination of tensile properties Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl... | |
| Thermoplastics pipes \x97 Determination of tensile properties Part 3: Polyolefin pipes | |
| Thermoplastics pipes Determination of tensile properties Part 1: General test method | |
| Titanium Dioxide Pigments for Paints - Part 1: Specifications and Methods of Test | |
| Tracked Changes (Redline) - Acoustics \x97 Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | |
| Tracked Changes (Redline) - Acoustics \x97 Statistical distribution of hearing thresholds related to age and gender | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils - Determination of moisture and volatile matter content | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils \x97 Determination of anisidine value | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils \x97 Determination of insoluble impurities content | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils \x97 Determination of refractive index | |
| Tracked Changes (Redline) - Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings | |
| Tracked Changes (Redline) - Arc welding and cutting \x97 Nonconsumable tungsten electrodes \x97 Classification | |
| Tracked Changes (Redline) - Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods | |
| Tracked Changes (Redline) - Buildings and civil engineering sealants \x97 Vocabulary | |
| Tracked Changes (Redline) - Camping tents \x96 Requirements and test methods | |
| Tracked Changes (Redline) - Cardiovascular implants - Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes | |
| Tracked Changes (Redline) - Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4: Dimensions, design, test methods... | |
| Tracked Changes (Redline) - Connections for hydraulic fluid power and general use \x96 Ports and stud ends with ISO 261 metric threads and O-ring sealin Part 1: Ports with truncated... | |
| Tracked Changes (Redline) - Conveyor belts - Transverse flexibility (troughability) - Test method | |
| Tracked Changes (Redline) - Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods | |
| Tracked Changes (Redline) - Dentistry - Ceramic materials | |
| Tracked Changes (Redline) - Dentistry \x97 Endodontic obturating materials | |
| Tracked Changes (Redline) - Dentistry \x97 Polymer-based pit and fissure sealants | |
| Tracked Changes (Redline) - Dried milk and dried milk products - Determination of moisture content (reference method) | |
| Tracked Changes (Redline) - Earth-moving machinery - Basic types - Identification and vocabulary | |
| Tracked Changes (Redline) - Ergonomics principles in the design of work systems | |
| Tracked Changes (Redline) - Fans - Performance testing using standardized airways | |
| Tracked Changes (Redline) - Fasteners - Prevailing torque hexagon nuts - High nuts (with non-metallic insert) | |
| Tracked Changes (Redline) - Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert) | |
| Tracked Changes (Redline) - Fasteners \x96 Hexagon washer head tapping screws | |
| Tracked Changes (Redline) - Fasteners \x97 Prevailing torque hexagon nuts \x97 High nuts (all metal) | |
| Tracked Changes (Redline) - Freight containers - Coding, identification and marking | |
| Tracked Changes (Redline) - Gas analysis - Contents of certificates for calibration gas mixtures | |
| Tracked Changes (Redline) - Gas analysis - Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures | |
| Tracked Changes (Redline) - Gas analysis - Preparation of calibration gas mixtures using dynamic methods Part 7: Thermal mass-flow controllers | |
| Tracked Changes (Redline) - Gas analysis \x97 Comparison methods for determining and checking the composition of calibration gas mixtures | |
| Tracked Changes (Redline) - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels | |
| Tracked Changes (Redline) - Heat-treated steels, alloy steels and free-cutting steels \x97 Part 17: Ball and roller bearing steels | |
| Tracked Changes (Redline) - Hydrometry \x96 Measurement of discharge by the ultrasonic transit time (time of flight) method | |
| Tracked Changes (Redline) - Hypodermic needles for single use \x97 Colour coding for identification | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials - Part 1: Wrought stainless steel | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron all | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials Part 2: Unalloyed titanium | |
| Tracked Changes (Redline) - Implants for surgery - Metallic materials Part 6: Wrought cobalt-nickel-chromi um-molybdenum alloy | |
| Tracked Changes (Redline) - Implants for surgery \x97 Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy | |
| Tracked Changes (Redline) - In vitro diagnostic medical devices - Single-use containers for the collection of specimens from humans other than blood | |
| Tracked Changes (Redline) - Industrial valves \x97 Mounting kits for part-turn valve actuator attachment | |
| Tracked Changes (Redline) - Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kW | |
| Tracked Changes (Redline) - Inflatable boats Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive | |
| Tracked Changes (Redline) - Inflatable boats Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater | |
| Tracked Changes (Redline) - Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater... | |
| Tracked Changes (Redline) - Innovation management - Fundamentals and vocabulary | |
| Tracked Changes (Redline) - Lubricants, industrial oils and related products (class L) \x97 Classification Part 4: Family H (Hydraulic systems) | |
| Tracked Changes (Redline) - Maize - Determination of moisture content (on milled grains and on whole grains) | |
| Tracked Changes (Redline) - Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes | |
| Tracked Changes (Redline) - Metallic materials - Brinell hardness test Part 2: Verification and calibration of testing machines | |
| Tracked Changes (Redline) - Metallic materials - Vickers hardness test Part 2: Verification and calibration of testing machines | |
| Tracked Changes (Redline) - Metallic materials - Vickers hardness test Part 3: Calibration of reference blocks | |
| Tracked Changes (Redline) - Metallic materials - Vickers hardness test Part 4: Tables of hardness values | |
| Tracked Changes (Redline) - Metallic materials \x96 Vickers hardness test Part 1: Test method | |
| Tracked Changes (Redline) - Metallic materials \x97 Rockwell hardness test Part 1: Test method | |
| Tracked Changes (Redline) - Metallic materials \x97 Rockwell hardness test Part 2: Verification and calibration of testing machines and indenters | |
| Tracked Changes (Redline) - Metallic materials \x97 Rockwell hardness test Part 3: Calibration of reference blocks | |
| Tracked Changes (Redline) - Metallic materials \x97 Tensile testing Part 1: Method of test at room temperature | |
| Tracked Changes (Redline) - Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Method using Baird-Parker agar... | |
| Tracked Changes (Redline) - Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Method using rabbit plasma... | |
| Tracked Changes (Redline) - Microbiology of the food chain \x97 Preparation of test samples, initial suspension and decimal dilutions for microbiological examination Part 1: General rules for the preparation of... | |
| Tracked Changes (Redline) - Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition | |
| Tracked Changes (Redline) - Natural gas - Determination of composition and associated uncertainty by gas chromatography Part 3: Precision and bias | |
| Tracked Changes (Redline) - Non-destructive - Ultrasonic testing - Vocabulary | |
| Tracked Changes (Redline) - Non-destructive testing - Industrial radiographic illuminators - Minimum requirements | |
| Tracked Changes (Redline) - Oilseeds \x96 Determination of moisture and volatile matter content | |
| Tracked Changes (Redline) - Packaging - Vocabulary - Part 1: Paper sacks | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of hiding power Part 1: Kubelka-Munk method for white and light-coloured paints | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of hiding power Part 3: Determination of hiding power of paints for masonry, concrete and interior use | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of resistance to humidity Part 2: Condensation (in-cabinet exposure with heated water reservoir) | |
| Tracked Changes (Redline) - Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form | |
| Tracked Changes (Redline) - Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials | |
| Tracked Changes (Redline) - Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 1: General procedures | |
| Tracked Changes (Redline) - Plastics - Determination of apparent density of material that can be poured from a specified funnel | |
| Tracked Changes (Redline) - Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method | |
| Tracked Changes (Redline) - Plastics - Determination of dynamic mechanical properties Part 1: General principles | |
| Tracked Changes (Redline) - Plastics - Determination of dynamic mechanical properties Torsion-pendulum method | |
| Tracked Changes (Redline) - Plastics - Determination of matter extractable by organic solvents (conventional methods) | |
| Tracked Changes (Redline) - Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing | |
| Tracked Changes (Redline) - Plastics - Film and sheeting - Determination of tear resistance Part 1: Trouser tear method | |
| Tracked Changes (Redline) - Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method | |
| Tracked Changes (Redline) - Plastics \x97 Determination of apparent density of moulding material that cannot be poured from a specified funnel | |
| Tracked Changes (Redline) - Plastics \x97 Determination of pourability | |
| Tracked Changes (Redline) - Plastics hoses - Textile-reinforced types for compressed-air applications - Specification | |
| Tracked Changes (Redline) - Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat... | |
| Tracked Changes (Redline) - Resistance welding \x97 Spot welding electrodes \x97 Female electrode caps | |
| Tracked Changes (Redline) - Rubber and plastics hoses - Determination of volumetric expansion | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies for saturated steam - Specification | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies for transferring anhydrous ammonia \x97 Specification | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies for use in oil burners \x96 Specification | |
| Tracked Changes (Redline) - Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing | |
| Tracked Changes (Redline) - Rubber or plastics hoses and hose assemblies \x97 Hydraulicpressure impulse test without flexing | |
| Tracked Changes (Redline) - Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) | |
| Tracked Changes (Redline) - Sintered metal material - Specifications | |
| Tracked Changes (Redline) - Sintered metal materials, excluding hardmetals \x97 Unnotched impact test piece | |
| Tracked Changes (Redline) - Standard representation of geographic point location by coordinates | |
| Tracked Changes (Redline) - Steel - Hardenability test by end quenching (Jominy test) | |
| Tracked Changes (Redline) - Steels \x97 Micrographic determination of the apparent grain size | |
| Tracked Changes (Redline) - Technical drawings \x97 Screw threads and threaded parts \x97 Part 3: Simplified representation | |
| Tracked Changes (Redline) - Technical product documentation (TPD) - Technical drawings for glassware | |
| Tracked Changes (Redline) - Technical product documentation - Representation of splines and serrations | |
| Tracked Changes (Redline) - Technical product documentation - Simplified representation of pipelines Part 1: General rules and orthogonal representation | |
| Tracked Changes (Redline) - Technical product documentation - Simplified representation of pipelines Part 2: Isometric projection | |
| Tracked Changes (Redline) - Technical product documentation - Simplified representation of pipelines Part 3: Terminal features of ventilation and drainage systems | |
| Tracked Changes (Redline) - Technical product documentation \x97 Construction documentation \x97 Indication of limit deviations | |
| Tracked Changes (Redline) - Technical product documentation \x97 Symbols used in technical product documentation \x97 Proportions and dimensions | |
| Tracked Changes (Redline) - Textiles - Domestic washing and drying procedures for textile testing | |
| Tracked Changes (Redline) - Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification | |
| Tracked Changes (Redline) - Thermoplastics pipes - Determination of tensile properties Part 1: General test method | |
| Tracked Changes (Redline) - Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale | |
| Tracked Changes (Redline) - Water quality - Determination of turbidity Part 2: Semi-quantitative methods for the assessment of transparency of waters | |
| Tracked Changes (Redline) - Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques | |
| Tracked Changes (Redline) - Water quality - Sampling Part 16: Guidance on biotesting of samples | |
| Tracked Changes (Redline) - Water quality - Sampling Part 3: Preservation and handling of water samples | |
| Tracked Changes (Redline) - Welding \x97 Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) \x97 Quality levels for imperfections | |
| Tracked Changes (Redline) - Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification | |
| Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria | |
| Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale | |
| Vitreous and porcelain enamels - Determination of the resistance to abrasion Part 1: Abrasion testing apparatus | |
| Vitreous and porcelain enamels - Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion | |
| Water quality - Determination of cadmium by atomic absorption spectrometry | |
| Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas chromatographic method after liquid-liquid extraction | |
| Water quality - Determination of dissolved oxygen - Electrochemical probe method | |
| Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method | |
| Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test | |
| Water quality - Determination of turbidity Part 1: Quantitative methods | |
| Water quality - Determination of turbidity Part 2: Semi-quantitative methods for the assessment of transparency of waters | |
| Water quality - Determination of turbidity | |
| Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium | |
| Water Quality - Sampling - Part 16: Guidance on Biotesting of Samples | |
| Water quality - Sampling - Part 19: Guidance on sampling in marine sediments | |
| Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques | |
| Water Quality - Sampling Part 13: Guidance on Sampling of Sludges from Sewage and Water Treatment Works | |
| Water quality - Sampling Part 15: Guidance on the preservation and handling of sludge and sediment samples | |
| Water quality - Sampling Part 23: Guidance on passive sampling in surface waters | |
| Water quality - Sampling Part 6: Guidance on sampling of rivers and streams | |
| Water quality \x96 Determination of biochemical oxygen demand after n days (BODn) Part 1: Dilution and seeding method with allylthiourea addition | |
| Water quality \x97 Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling | |
| Water Quality Sampling Guidance on the Preservation and Handling of Samples | |
| Welding and Allied Processes - Classification of Geometric Imperfections in Metallic Materials - Part 2: Welding with Pressure | |
| Welding and Allied Processess - Classification of Geometric Imperfections in Metallic Materials - Part 1: Fusion Welding | |
| Welding Consumables - Deposition of a Weld Metal Pad for Chemical Analysis | |
| Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification | |
| Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections | |
| Welds - Working Positions - Definitions of Angles of Slope and Rotation | |
| Wheat - Determination of the sedimentation index - Zeleny test | |
| Wheat flour \x97 Physical characteristics of doughs Part 1: Determination of water absorption and rheological properties using a farinograph | |
| Wheat flour \x97 Physical characteristics of doughs Part 2: Determination of rheological properties using an extensograph |
| << Prev | Next >> |