Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
364
365
366
367
368
369
370
371
372
373
374
375
376
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes - Part 1: Method Using Standing Wave Ratio | |
| Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method | |
| Acoustics - Laboratory and field measurement of the flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 5: Radiation efficiencies of building elements | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 1: Frame document | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2: Application to light elements when the junction has a small influence... | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 4: Application to junctions with at least one heavy element | |
| Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 1: Principles and Guidelines | |
| Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic Stiffness of Elastic Supports for Translatory Motion - Direct Method | |
| Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory... | |
| Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion | |
| Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion | |
| Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3: Application to light elements when the junction has a substantial influence | |
| Adhesives - Designation of Main Failure Patterns | |
| Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners | |
| Animal and Vegetable Fats and Oils - Determination of Alkalinity | |
| Biological Evaluation of Medical Devices - Part 13: Identification and Quantification of Degradation Products from Polymeric Medical Devices | |
| Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics | |
| Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys | |
| Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances | |
| Biological Evaluation of Medical Devices - Part 2: Animal Welfare Requirements | |
| Biological Evaluation of Medical Devices - Part 5: Tests for In Vitro Cytotoxicity | |
| Biological evaluation of medical devices - Part 6: Tests for local effects after implantation | |
| Biological Evaluation of Medical Devices - Part 8: Selection and Qualification of Reference Materials for Biological Tests | |
| Biological Evaluation of Medical Devices - Part 9: Framework for Identification and Quantification of Potential Degradation Products | |
| Biological evaluation of medical devices Ethylene oxide sterilization residuals | |
| Biological Evaluation of Medical Devices Part 10: Tests for Irritation and Sensitization | |
| Biological Evaluation of Medical Devices Part 11: Tests for Systematic Toxicity | |
| Biological Evaluation of Medical Devices Part 12: Sample Preparation and Reference Materials | |
| Biological Evaluation of Medical Devices Part 16: Toxicokinetic Study Design for Degradation Products and Leachables | |
| Biological evaluation of medical devices Part 18: Chemical characterization of materials | |
| Biological evaluation of medical devices Part 18: Chemical characterization of medical device materials within a risk management process | |
| Biological Evaluation of Medical Devices Part 1: Evaluation and Testing | |
| Biological evaluation of medical devices Part 23: Tests for irritation | |
| Biological evaluation of medical devices Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity | |
| Biological evaluation of medical devices Part 4: Selection of tests for interactions with blood | |
| Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity | |
| Biological Evaluation of Medical Devices Part 7: Ethylene Oxide Sterilization Residuals | |
| Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries | |
| Building Construction - Sealants - Determination of Adhesion/Cohesion Properties After Immersion in Water | |
| Building Construction - Sealants - Determination of Adhesion/Cohesion Properties at Maintained Extension After Immersion in Water | |
| Building Construction - Sealants for Joints - Determination of Change in Mass and Volume | |
| Building Materials and Products - Procedures for Determining Declared and Design Thermal Values | |
| Carbon Fibre - Determination of Size Content | |
| Carbon Fibre - Determination of Tensile Properties of Resin-Impregnated Yarns | |
| Ceramic tiles - Part 10: Determination of moisture expansion | |
| Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles | |
| Ceramic tiles - Part 12: Determination of frost resistance | |
| Ceramic tiles - Part 13: Determination of chemical resistance | |
| Ceramic tiles - Part 14: Determination of resistance to stains | |
| Ceramic Tiles - Part 16: Determination of Small Colour Differences | |
| Ceramic tiles - Part 1: Sampling and basis for acceptance | |
| Ceramic tiles - Part 2: Determination of dimensions and surface quality | |
| Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density | |
| Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength | |
| Ceramic Tiles - Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restitution | |
| Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles | |
| Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles | |
| Ceramic tiles - Part 8: Determination of linear thermal expansion | |
| Ceramic tiles - Part 9: Determination of resistance to thermal shock | |
| Ceramic Tiles Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles | |
| Ceramic tiles Part 18: Determination of Light Reflectance Value (LRV) | |
| Ceramic tiles Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature | |
| Clay geosynthetic barriers - Determination of permeability to gases | |
| Clay geosynthetic barriers - Determination of water absorption of bentonite | |
| Compressed air \x97 Energy efficiency \x97 Assessment | |
| Cone proof load test on nuts | |
| Dental Equipment - High- and Medium-Volume Suction Systems | |
| Dental Implant Systems - Contents of Technical File | |
| Dentistry - Denture adhesives | |
| Dentistry - Designation system for supernumerary teeth | |
| Dentistry - Polymer- Based Crown ans Bridge Materials | |
| Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps | |
| Dentistry \x97 Powered polymerization activators | |
| Dentistry Powered polymerization activators Part 1: Quartz tungsten halogen lamps | |
| Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols | |
| Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams | |
| Drilling Screws with Tapping Screw Threads - Mechanical and Functional Properties | |
| Durum wheat flour and semolina - Determination of yellow pigment content | |
| Electronic health record-system functional model, release 1.1 CD-ROM | |
| Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites | |
| Ergonomic Design of Control Centres - Part 3: Control Room Layout | |
| Ergonomic design of control centres - Part 6: Environmental requirements for control centres | |
| Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres | |
| Ergonomic design of control centres Part 1: Principles for the design of control centres | |
| Ergonomic design of control centres Part 4: Layout and dimensions of workstations | |
| Ergonomic design of control centres Part 5: Displays and controls | |
| Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales | |
| Fasteners - Hot dip galvanized coatings | |
| Fasteners - Non-Electrolytically Applied Zinc Flake Coatings | |
| Fibre ropes of polyester/polyolefin dual fibres | |
| Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area | |
| Fishing nets Netting Basic terms and definitions | |
| Flow Diagrams for Process Plants - General Rules | |
| Footwear - Test method for slide fasteners - Burst strength | |
| Footwear - Test method for slide fasteners - Slider locking strength | |
| Footwear - Test method for the characterization of elastic materials - Tensile performance | |
| Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance | |
| Footwear \x96 Test method for slide fasteners \x96 Attachment strength of end stops | |
| Footwear \x97 Test method for slide fasteners \x97 Strength of slide fastener pullers | |
| Footwear \x97 Test methods for slide fasteners \x97 Lateral strength | |
| Footwear \x97 Test methods for slide fasteners \x97 Resistance to repeated opening and closing | |
| Freight Containers - Automatic Identification | |
| Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance | |
| Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection | |
| Gas Cylinders - Gas Cylinder Valve Connections for Use in the Microelectronics Industry - Part 1: Outlet Connections | |
| Gas Cylinders - Gas Cylinder Valve Connections for Use in the Microelectronics Industry - Part 2: Specification and Type Testing for Valve to Cylinder Connections | |
| Gas cylinders \x96 Welded aluminium-alloy, carbon and stainless steel gas cylinders \x96 Periodic inspection and testing | |
| Gas cylinders \x97 Acetylene cylinders \x97 Periodic inspection and maintenance | |
| Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machine (CMM) - Part 4: CMMs Used in Scanning Measuring Mode | |
| Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 1: Vocabulary | |
| Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 3: CMMs with the Axis of a Rotary Table as the Fourth Axis | |
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) Part 7: CMMs equipped with imaging probing systems | |
| Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts | |
| Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out | |
| Geometrical product specifications (GPS) \x97 Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring point-to-point distances | |
| Geometrical product specifications (GPS) \x97 Acceptance and reverification tests for coordinate measuring systems (CMS) Part 12: Articulated arm coordinate measurement machines (CMM) | |
| Geometrical product specifications (GPS) \x97 Acceptance and reverification tests for coordinate measuring systems (CMS) Part 13: Optical 3D CMS | |
| Geometrical product specifications (GPS) \x97 Acceptance and reverification tests for coordinate measuring systems (CMS) Part 8: CMMs with optical distance sensors | |
| Geometrical product specifications (GPS) \x97 Acceptance and reverification tests for coordinate measuring systems (CMS) Part 9: CMMs with multiple probing systems | |
| Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 2: Performance assessment of coordinate measuring machines | |
| Geometrical Products Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 5: CMMs Using Multiple-Stylus Probing Systems | |
| Geometrical Products Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 6: Estimation of Errors in Computing Gaussian Associated Features | |
| Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material | |
| Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions | |
| Geotextiles and Geotextile-Related Products - Determination of Water Permeability Characteristics Normal to the Plane, without Load | |
| Geotextiles and geotextilerelated products - Determination of water permeability characteristics normal to the plane, under load | |
| Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions | |
| Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator's Breathing Zone - Part 1: Sampling of Airborne Particles | |
| Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator's Breathing Zone - Part 2: Sampling of Gases | |
| Health informatics - Personal health device communication Part 10404: Device specialization - Pulse oximeter | |
| Health informatics - Personal health device communication Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) | |
| Health informatics - Personal health device communication Part 10407: Device specialization - Blood pressure monitor | |
| Health informatics - Personal health device communication Part 10408: Device specialization - Thermometer | |
| Health informatics - Personal health device communication Part 10415: Device specialization - Weighing scale | |
| Health informatics - Personal health device communication Part 10417: Device specialization - Glucose meter | |
| Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature | |
| Health informatics - Point-of-care medical device communication Part 10101: Nomenclature | |
| Health informatics - Point-of-care medical device communication Part 10103: Nomenclature - Implantable device, cardiac | |
| Health informatics \x97 Personal health device communication Part 00103: Overview | |
| Health informatics \x97 Personal health device communication Part 10418: Device specialization \x97 International Normalized Ratio (INR) monitor | |
| Health informatics \x97 Point-of-care medical device communication \x97 Part 10201: Domain information model | |
| Health informatics \x97 Point-of-care medical device communication Part 10102: Nomenclature \x97 Annotated ECG | |
| Hexagon Socket Countersunk Head Screws | |
| Hexalobular Internal Driving Feature for Bolts and Screws | |
| Hoists for the Transfer of Disabled Persons - Requirements and Test Methods | |
| Industrial sewing machines - Safety requirements for sewing machines, units and systems | |
| Intravascular catheters - Sterile and single-use catheters Part 1: General requirements | |
| Intravascular catheters \x96 Sterile and single-use catheters Part 6: Subcutaneous implanted ports | |
| Intravascular catheters \x97 Sterile and single-use catheters Part 6: Subcutaneous implanted ports | |
| Laboratory Glassware - One-Mark Volumetric Flasks | |
| Lung Ventilators - Part 4: Particular Requirements for Operator-Powered Resuscitators | |
| Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients | |
| Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices | |
| Lung ventilators for medical use - Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators | |
| Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | |
| Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand | |
| Micaceous iron oxide pigments for paints - Specifications and test methods | |
| Micro process engineering - Vocabulary | |
| Mixed polyolefin fibre ropes | |
| Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing | |
| Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensa tion method | |
| Native Starch - Determination of Starch Content - Ewers Polarimetric Method | |
| Natural gas - Performance evaluation for on-line analytical systems | |
| Natural Gas - Sampling Guidelines | |
| Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections | |
| Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections | |
| Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes | |
| Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness | |
| Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections | |
| Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse... | |
| Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections | |
| Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections | |
| Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections | |
| Non-destructive testing of steel tubes Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections | |
| Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections | |
| Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes | |
| Non-destructive testing of the steel tubes Part 8: automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections | |
| Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) | |
| Non-destructive testing of welds \x97 Acceptance levels for radiographic testing Part 1: Steel, nickel, titanium and their alloys | |
| Non-destructive testing of welds \x97 Acceptance levels for radiographic testing Part 2: Aluminium and its alloys | |
| Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers | |
| Offshore containers and associated lifting sets Part 2: Design, manufacture and marking of lifting sets | |
| Offshore containers and associated lifting sets Part 3: Periodic inspection, examination and testing | |
| Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry | |
| Ophthalmic Instruments - Chart Projectors | |
| Ophthalmic Instruments - Direct Ophthalmoscopes | |
| Ophthalmic Instruments - Fundus Cameras | |
| Ophthalmic Instruments - Indirect Ophthalmoscopes | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification Part 1: Product identification and electronic catalogue product hierarchy | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification Part 3: Technical information | |
| Ophthalmic Optics - Synoptophores | |
| Opthalmic Instruments - Slit-Lamp Microscopes | |
| Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation | |
| Petroleum and Its Products Part 398: Petroleum Products - Determination of Carbon Residue - Micro Method | |
| Petroleum and natural gas industries - Care and use of casing and tubing | |
| Petroleum and Natural Gas Industries - Cements and Materials for Well Cementing - Part 1: Specification | |
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations | |
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure | |
| Petroleum and natural gas industries - Cements and materials for well cementing Part 6: Methods for determining the static gel strength of cement formulations | |
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment | |
| Petroleum and natural gas industries - Drilling fluids - Laboratory testing | |
| Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment | |
| Petroleum and natural gas industries - Equipment for well cementing Part 2: Centralizer placement and stop-collar testing | |
| Petroleum and natural gas industries - Field testing of drilling fluids Part 2: Oil-based fluids | |
| Petroleum and Natural Gas Industries - Flexible Couplings Mechanical Power Transmission - Special Purpose Applications | |
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements | |
| Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections | |
| Petroleum and natural gas industries - Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements | |
| Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacemen t Compressors - Part 1: Process Compressors (Oil-Free) | |
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress | |
| Petroleum and natural gas industries \x97 Casing centralizers \x97 Part 1: Bow-spring casing centralizers | |
| Petroleum and natural gas industries \x97 Field testing of drilling fluids Part 1: Water-based fluids | |
| Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements | |
| Petroleum and natural gas industries Cements and materials for well cementing Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure | |
| Petroleum and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 2: Special-purpose oil systems | |
| Petroleum and natural gas industries Offshore production installations Basic surface process safety systems | |
| Petroleum and natural gas industries Rotary-type positive-displacemen t compressors Part 2: Packaged air compressors (oil-free) | |
| Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment | |
| Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment | |
| Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors | |
| Petroleum, chemical and gas service industries Centrifugal compressors | |
| Petroleum, petrochemical and natural gas industries \x97 Axial and centrifugal compressors and expander-compressors Part 1: General requirements | |
| Petroleum, petrochemical and natural gas industries \x97 Axial and centrifugal compressors and expander-compressors Part 2: Non-integrally geared centrifugal and axial compressors | |
| Petroleum, petrochemical and natural gas industries \x97 Axial and centrifugal compressors and expander-compressors Part 3: Integrally geared centrifugal compressors | |
| Petroleum, petrochemical and natural gas industries \x97 Axial and centrifugal compressors and expander-compressors Part 4: Expander-compressors | |
| Petroleum, petrochemical and natural gas industries \x97 Steam turbines \x97 Special-purpose applications | |
| Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements | |
| Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems | |
| Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support | |
| Pipework - Corrugated Flexible Metallic Hose Assemblies for the Protection of Electrical Cables in Explosive Atmosphere | |
| Pipework - Corrugated metal hoses and hose assemblies | |
| Pipework - Fittings for corrugated metallic hoses | |
| Plain Washers for Screw and Washer Assemblies - Small, Normal and Large Series - Product Grade A | |
| Plain Washers for Tapping Screw and Washer Assemblies - Normal and Large Series - Product Grade A | |
| Plastics - Acquisition and Presentation of Comparable Single-Point Data - Part 2: Long-Fibre-Reinforce d Plastic | |
| Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionizatio n time-of-flight mass spectrometry (MALDI-TOF-MS) | |
| Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 1: Designation System and Basis for Specifications | |
| Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 2: Preparation of Test Samples and Determination of Properties | |
| Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles and Moulding of Multipurpose Test Specimens | |
| Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates | |
| Plastics - Methyl Methacrylate/Acrylon itrile/Butadiene/Sty rene (MABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications | |
| Plastics - Methyl Methacrylate/Acrylon itrile/Butadiene/Sty rene (MABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics | |
| Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials | |
| Plastics - Symbols and Abbreviated Terms - Part 3: Plasticizers | |
| Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants | |
| Plastics - Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics | |
| Plastics - Unplasticized Cellulose Acetate - Determination of Free Acidity | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use | |
| Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system | |
| Polyamide fibre ropes - Double braid construction | |
| Polyester fibre ropes - Double braid construction | |
| Powered hand-held hedge trimmers - Safety | |
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators | |
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves | |
| Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices | |
| Pressure regulators for use with medical gases Part 4: Low-pressure regulators | |
| Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 | |
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 | |
| Prevailing torque type hexagon thin nuts (with non-metallic insert) | |
| Rapeseed - Determination of Chlorophyll Content - Spectrometric Method | |
| Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification | |
| Resilient floor coverings - Semi-flexible/vinylc omposition (VCT) poly(vinyl chloride) floor tiles - Specification | |
| Resilient floor coverings \x97 Homogeneous poly(vinyl chloride) floor covering \x97 Specifications | |
| Resilient, textile and laminate floor coverings - Classification | |
| Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions | |
| Resistance welding - Peel and chisel testing of resistance spot and projection welds | |
| Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions | |
| Resistance welding equipment \x97 Transformers \x97 Integrated transformers for welding guns | |
| Rubber and Plastics Hoses - Assessment of Ozone Resistance Under Dynamic Conditions | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures | |
| Safety Requirements for Industrial Laundry Machinery Part 1: Common Requirements | |
| Safety Requirements for Industrial Laundry Machinery Part 2: Washing Machines and Washer-Extractors | |
| Safety Requirements for Industrial Laundry Machinery Part 3: Washing Tunnel Lines Including Component Machines | |
| Safety Requirements for Industrial Laundry Machinery Part 4: Air Dryers | |
| Safety Requirements for Industrial Laundry Machinery Part 5: Flatwork Ironers, Feeders and Folders | |
| Safety Requirements for Industrial Laundry Machinery Part 6: Ironing and Fusing Presses | |
| Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV | |
| Sensory analysis - Methodology - Duo-trio test | |
| Small Craft - Hydraulic Steering Systems | |
| Small craft - Quick release system for trapeze harness | |
| Soil quality - Measurement of the stability of soil aggregates subjected to the action of water | |
| Soil quality \x97 Determination of carbonate content \x97 Volumetric method | |
| Soil quality \x97 Method to directly extract DNA from soil samples | |
| Soil, treated biowaste and sludge - Determination of pH | |
| Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis | |
| Starch Derivatives - Determination of the Composition of Glucose Syrups, Fructose Syrups and Hydrogenated Glucose Syrups - Method Using High-Performance Liquid Chromatography | |
| Steel and Iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas | |
| Steel and iron - Determination of phosphorus content - Phosphovanadomolybda te spectrophotometric method | |
| Sterile single-use intravascular introducers, dilators and guidewires | |
| Sterile, Single-Use Intravascular Catheter Introducers | |
| Sterile, Single-Use Intravascular Catheters Part 1: General Requirements | |
| Sterile, Single-Use Intravascular Catheters Part 2: Angiographic Catheters | |
| Sterile, single-use intravascular catheters Part 3: Central venous catheters | |
| Sterile, single-use intravascular catheters Part 4: Balloon dilatation catheters | |
| Sterile, Single-Use Intravascular Catheters Part 5: Over-Needle Peripheral Catheters | |
| Structural adhesives \x96 Determination of the pot life (working life) of multi-component adhesives | |
| Tapping Screw and Washer Assemblies with Plain Washers | |
| Testing of valves Fire type-testing requirements | |
| Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test | |
| Textiles - Test for Colour Fastness Part A05: Instrumental Assessment of Change of Colour for Determination of Gray Scale Rating | |
| Textiles - Test for Colour Fastness Part A06: Instrumental Determination of 1/1 Standard Depth of Colour | |
| Textiles - Test for Colour Fastness Part E14: Colour Fastness to Acid-Felting: Mild | |
| Textiles - Tests for Colour Fastness - Part A04: Method for the Instrumental Assessment of the Degree of Staining of Adjacent Fabrics | |
| Textiles - Tests for colour fastness - Part A11: Determination of colour fastness grades by digital imaging techniques | |
| Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light: Daylight | |
| Textiles - Tests for Colour Fastness - Part B02: Colour Fastness to Artificial Light: Xenon Arc Fading Lamp Test | |
| Textiles - Tests for Colour Fastness - Part B08: Quality Control of Blue Wool Reference Materials 1 to 7 | |
| Textiles - Tests for Colour Fastness - Part C07: Colour Fastness to Wet Scrubbing of Pigment Printed Textiles | |
| Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator | |
| Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour | |
| Textiles - Tests for Colour Fastness - Part J02: General Principles for Measurement of Surface Colour | |
| Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2) | |
| Textiles - Tests for Colour Fastness - Part Z 11: Evaluation of Speckiness of Colorant Dispersions | |
| Textiles - Tests for Colour Fastness - Part Z03: Intercompatibility of Basic Dyes for Acrylic Fibres | |
| Textiles - Tests for Colour Fastness - Part Z04: Disperse Dyes | |
| Textiles - Tests for Colour Fastness - Part Z05: Determination of the Dusting Behaviour of Dyes | |
| Textiles - Tests for Colour Fastness - Part Z06: Evaluation of Dye and Pigment Migration | |
| Textiles - Tests for Colour Fastness - Part Z10: Determination of Relative Colour Strength of Dyes in Solution | |
| Textiles - Tests for Colour Fastness Part A01: General Principles of Testing | |
| Textiles - Tests for Colour Fastness Part B03: Colour Fastness to Weathering: Outdoor Exposure | |
| Textiles - Tests for Colour Fastness Part B04: Colour Fastness to Artificial Weathering: Xenon Arc Fading Lamp Test | |
| Textiles - Tests for Colour Fastness Part B05: Detection and Assessment of Photochromism | |
| Textiles - Tests for colour fastness Part B07: Colour fastness to light of textiles wetted with artificial perspiration | |
| Textiles - Tests for colour fastness Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation | |
| Textiles - Tests for Colour Fastness Part D01: Colour Fastness to Dry Cleaning | |
| Textiles - Tests for Colour Fastness Part D02: Colour Fastness to Rubbing: Organic Solvents | |
| Textiles - Tests for Colour Fastness Part E01: Colour Fastness to Water | |
| Textiles - Tests for Colour Fastness Part E02: Colour Fastness to Sea Water | |
| Textiles - Tests for Colour Fastness Part E03: Colour Fastness to Chlorinated Water (Swimming-Pool Water) | |
| Textiles - Tests for Colour Fastness Part E04: Colour Fastness to Perspiration | |
| Textiles - Tests for Colour Fastness Part E05: Colour Fastness to Spotting: Acid | |
| Textiles - Tests for Colour Fastness Part E09: Colour Fastness to Potting | |
| Textiles - Tests for Colour Fastness Part E10: Colour Fastness to Decatizing | |
| Textiles - Tests for Colour Fastness Part E11: Colour Fastness to Steaming | |
| Textiles - Tests for Colour Fastness Part E12: Colour Fastness to Milling: Alkaline Milling | |
| Textiles - Tests for Colour Fastness Part E13: Colour Fastness to Acid-Felting: Severe | |
| Textiles - Tests for Colour Fastness Part G02: Colour Fastness to Burnt-Gas Fumes | |
| Textiles - Tests for Colour Fastness Part G03: Colour Fastness to Ozone in the Atmosphere | |
| Textiles - Tests for Colour Fastness Part J03: Calculation of Colour Differences | |
| Textiles - Tests for Colour Fastness Part N02: Colour Fastness to Bleaching - Peroxide | |
| Textiles - Tests for Colour Fastness Part N03: Colour Fastness to Bleaching - Sodium Chlorite (Mild) | |
| Textiles - Tests for Colour Fastness Part P02: Colour Fastness to Pleating: Steam Pleating | |
| Textiles - Tests for Colour Fastness Part S01: Colour Fastness to Vulcanization: Hot Air. | |
| Textiles - Tests for Colour Fastness Part S02: Colour Fastness to Vulcanization: Sulfur Monochloride | |
| Textiles - Tests for Colour Fastness Part S03: Colour Fastness to Vulcanization: Open Steam | |
| Textiles - Tests for Colour Fastness Part X01: Colour Fastness to Carbonizing: Aluminium Chloride | |
| Textiles - Tests for Colour Fastness Part X02: Colour Fastness to Carbonizing: Sulfuric Acid | |
| Textiles - Tests for Colour Fastness Part X04: Colour Fastness to Mercerizing | |
| Textiles - Tests for Colour Fastness Part X05: Colour Fastness to Organic Solvents | |
| Textiles - Tests for Colour Fastness Part X06: Colour Fastness to Soda Boiling | |
| Textiles - Tests for Colour Fastness Part X07: Colour Fastness to Cross-Dyeing: Wool | |
| Textiles - Tests for Colour Fastness Part X08: Colour Fastness to Degumming | |
| Textiles - Tests for Colour Fastness Part X09: Colour Fastness to Formaldehyde | |
| Textiles - Tests for Colour Fastness Part X10: Assessment of Migration of Textile Colours into Polyvinyl Chloride Coatings | |
| Textiles - Tests for Colour Fastness Part X11: Colour Fastness to Hot Pressing | |
| Textiles - Tests for Colour Fastness Part X12: Colour Fastness to Rubbing | |
| Textiles - Tests for Colour Fastness Part X13: Colour Fastness of Wool Dyes to Processes Using Chemical Means for Creasing, Pleating and Setting | |
| Textiles - Tests for Colour Fastness Part X14: Colour Fastness to Acid Chlorination of Wool: Sodium Dichloroisocyanurate | |
| Textiles - Tests for Colour Fastness Part Z01: Colour Fastness to Metals in the Dye-Bath: Chromium Salts | |
| Textiles - Tests for Colour Fastness Part Z02: Colour Fastness to Metals in the DyeBath: Iron and Copper | |
| Textiles - Tests for Colour Fastness Part Z07: Determination of Application Solubility and Solution Stability of Water-Soluble Dyes | |
| Textiles - Tests for Colour Fastness Part Z08: Determination of Solubility and Solution Stability of Reactive Dyes in the Presence of Electrolytes | |
| Textiles - Tests for Colour Fastness Part Z09: Determination of Cold Water Solubility of Water-Soluble Dyes | |
| Textiles \x97 Tests for colour fastness \x97 Part C10: Colour fastness to washing with soap or soap and soda | |
| Textiles \x97 Tests for colour fastness \x97 Part C12 : Colour fastness to industrial laundering | |
| Textiles \x97 Tests for colour fastness \x97 Part E16: Colour fastness to water spotting on upholstery fabrics | |
| Textiles \x97 Tests for colour fastness \x97 Part X18: Assessment of the potential to phenolic yellowing of materials | |
| Textiles \x97 Tests for colour fastness Part A03: Grey scale for assessing staining | |
| Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test | |
| Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering | |
| Textiles Tests for colour fastness Part C09: Colour fastness to domestic and commercial laundering Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator | |
| Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali | |
| Textiles Tests for colour fastness Part E07: Colour fastness to spotting: Water | |
| Textiles Tests for Colour Fastness Part E08: Colour Fastness to Hot Water | |
| Textiles Tests for colour fastness Part X16: Colour fastness to rubbing Small areas | |
| Textiles. Tests for colour fastness. Part G01: Colour fastness to nitrogen oxides | |
| Textiles. Tests for colour fastness. Standard depths: matt | |
| Tracked Changes (Readline) - Ceramic tiles Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density | |
| Tracked Changes (Redline) - Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 1: Frame document | |
| Tracked Changes (Redline) - Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 3: Application to Type B... | |
| Tracked Changes (Redline) - Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 4: Application to junctions with... | |
| Tracked Changes (Redline) - Acoustics \x97 Determination of acoustic properties in impedance tubes \x97 Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance | |
| Tracked Changes (Redline) - Adhesives - Designation of main failure patterns | |
| Tracked Changes (Redline) - Assistive products \x97 Hoists for the transfer of persons \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Biological evaluation of medical devices - Ethylene oxide sterilization residuals | |
| Tracked Changes (Redline) - Biological evaluation of medical devices - Part 12: Sample preparation and reference materials | |
| Tracked Changes (Redline) - Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents | |
| Tracked Changes (Redline) - Biological evaluation of medical devices \x97 Part 15: Identification and quantification of degradation products from metals and alloys | |
| Tracked Changes (Redline) - Biological evaluation of medical devices \x97 Part 9: Framework for identification and quantification of potential degradation products | |
| Tracked Changes (Redline) - Biological evaluation of medical devices Part 10: Tests for skin sensitization | |
| Tracked Changes (Redline) - Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process | |
| Tracked Changes (Redline) - Biological evaluation of medical devices Part 6: Tests for local effects after implantation | |
| Tracked Changes (Redline) - Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water | |
| Tracked Changes (Redline) - Buildings and civil engineering works - Sealants - Determination of change in mass and volume | |
| Tracked Changes (Redline) - Ceramic tiles - Part 10: Determination of moisture expansion | |
| Tracked Changes (Redline) - Ceramic tiles Part 13: Determination of chemical resistance | |
| Tracked Changes (Redline) - Ceramic tiles Part 14: Determination of resistance to stains | |
| Tracked Changes (Redline) - Ceramic tiles Part 2: Determination of dimensions and surface quality | |
| Tracked Changes (Redline) - Ceramic tiles Part 4: Determination of modulus of rupture and breaking strength | |
| Tracked Changes (Redline) - Dentistry - Central suction source equipment | |
| Tracked Changes (Redline) - Dentistry - Denture adhesives | |
| Tracked Changes (Redline) - Dentistry - Powered polymerization activators | |
| Tracked Changes (Redline) - Dentistry \x96 Polymer-based crown and veneering materials | |
| Tracked Changes (Redline) - Fasteners - Non-electrolytically applied zinc flake coating systems | |
| Tracked Changes (Redline) - Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert), with fine pitch thread | |
| Tracked Changes (Redline) - Fasteners \x97 Prevailing torque hexagon nuts \x97 High nuts (all metal), with fine pitch thread | |
| Tracked Changes (Redline) - Fasteners \x97 Prevailing torque hexagon nuts \x97 Thin nuts (with non-metallic insert) | |
| Tracked Changes (Redline) - Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out | |
| Tracked Changes (Redline) - Geotextiles and geotextile-related products \x96 Determination of water permeability characteristics normal to the plane, without load | |
| Tracked Changes (Redline) - Glass-reinforced thermosetting plastics (GRP) pipes \x97 Determination of the ring creep properties under wet or dry conditions | |
| Tracked Changes (Redline) - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne... | |
| Tracked Changes (Redline) - Health and safety in welding and allied processes \x97 Sampling of airborne particles and gases in the operator's breathing zone \x97 Part 2: Sampling of gases... | |
| Tracked Changes (Redline) - Health Informatics \x97 HL7 Electronic Health Records-System Functional Model, Release 2.1 (EHR FM) | |
| Tracked Changes (redline) - Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements | |
| Tracked Changes (Redline) - Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters | |
| Tracked Changes (Redline) - Lung ventilators - Part 4: Particular requirements for user-powered resuscitators | |
| Tracked Changes (Redline) - Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | |
| Tracked Changes (Redline) - Microfluidics - Vocabulary | |
| Tracked Changes (Redline) - Natural gas \x97 Gas sampling | |
| Tracked Changes (Redline) - Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections | |
| Tracked Changes (Redline) - Non-destructive testing of steel tubes Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections | |
| Tracked Changes (Redline) - Non-destructive testing of welds - Acceptance levels for radiographic testing Part 1: Steel, nickel, titanium and their alloys | |
| Tracked Changes (Redline) - Non-destructive testing of welds - Acceptance levels for radiographic testing Part 2: Aluminium and its alloys | |
| Tracked Changes (Redline) - Offshore containers and associated lifting sets \x97 Part 2: Design, manufacture and marking of lifting sets | |
| Tracked Changes (Redline) - Offshore containers and associated lifting sets \x97 Part 3: Periodic inspection, examination and testing | |
| Tracked Changes (Redline) - Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy \x97 Cements and materials for well cementing \x97 Part 5: Determination of shrinkage and expansion of well cement... | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy \x97 Equipment for well cementing \x97 Part 1: Casing bow-spring centralizers | |
| Tracked Changes (Redline) - Ophthalmic instruments - Slit-lamp microscopes | |
| Tracked Changes (Redline) - Ophthalmic instruments \x97 Direct ophthalmoscopes | |
| Tracked Changes (Redline) - Ophthalmic instruments \x97 Indirect ophthalmoscopes | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Offshore production installations - Process safety systems | |
| Tracked Changes (Redline) - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants | |
| Tracked Changes (Redline) - Plastics \x97 Symbols and abbreviated terms Part 3: Plasticizers | |
| Tracked Changes (Redline) - Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices | |
| Tracked Changes (Redline) - Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators | |
| Tracked Changes (Redline) - Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves (VIPRs) | |
| Tracked Changes (Redline) - Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications | |
| Tracked Changes (Redline) - Resilient floor coverings \x96 Homogeneous poly(vinyl chloride) floor covering \x96 Specifications | |
| Tracked Changes (Redline) - Resistance welding \x97 Testing of welds \x97 Peel and chisel testing of resistance spot and projection welds | |
| Tracked Changes (Redline) - Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions | |
| Tracked Changes (Redline) - Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures | |
| Tracked Changes (Redline) - Rubber and plastics hoses and tubing \x96 Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature | |
| Tracked Changes (Redline) - Sensory analysis \x96 Methodology \x96 Duotrio test | |
| Tracked Changes (Redline) - Small craft - Hydraulic steering systems | |
| Tracked Changes (Redline) - Soil, treated biowaste and sludge - Determination of pH | |
| Tracked Changes (Redline) - Steel and iron \x97 Determination of phosphorus content \x97 Phosphovanadomolybda te spectrophotometric method | |
| Tracked Changes (Redline) - Structural adhesives \x97 Determination of the pot life (working life) of multi-component adhesives | |
| Tracked Changes (Redline) - Testing of valves - Fire type-testing requirements | |
| Tracked Changes (Redline) - Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test | |
| Tracked Changes (Redline) - Textiles - Tests for colour fastness Part B03: Colour fastness to weathering: Outdoor exposure | |
| Tracked Changes (Redline) - Textiles - Tests for colour fastness Part X16: Colour fastness to rubbing - Small areas | |
| Tracked Changes (Redline) - Textiles \x97 Tests for colour fastness \x97 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test | |
| Tracked Changes (Redline) - Textiles \x97 Tests for colour fastness \x97 Part C12: Colour fastness to industrial laundering | |
| Tracked Changes (Redline) - Water quality - Gross alpha and gross beta activity - Test method using thin source deposit | |
| Tracked Changes (Redline) - Water quality - Preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium | |
| Tracked Changes (Redline) - Welding consumables \x97 Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron \x97 Classification | |
| Water and soil quality - Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda) | |
| Water Quality - Detection and Enumeration of Bacteriophages - Part 2: Enumeration of Somatic Coliphages | |
| Water quality - Determination of pH | |
| Water Quality - Determination of Selected Organic Nitrogen and Phosphorus Compounds - Gas Chromatographic Methods | |
| Water quality - Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne | |
| Water quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium | |
| Water quality - Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters | |
| Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method | |
| Water Quality - Part 1: Detection and Enumeration of Bacteriophages - Enumeration of F-Specific RNA Bacteriophages | |
| Water quality - Pseudomonas putida growth inhibition test (Pseudomonas cell multiplication inhibition test) | |
| Water quality \x97 Detection and enumeration of bacteriophages Part 3: Validation of methods for concentration of bacteriophages from water | |
| Water quality \x97 Determination of the activity concentration of radionuclides \x97 Method by high resolution gamma-ray spectrometry | |
| Water quality Evaluation in an aqueous medium of the \x91ultimate\x92 aerobic biodegradability of organic compounds - Method by analysis of biochemical oxygen demand (closed bottle test) | |
| Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification | |
| Widening test on nuts |
| << Prev | Next >> |