Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
320
330
340
350
360
370
377
378
379
380
381
382
383
384
385
386
387
388
389
390
400
410
420
430
440
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment | |
| Acoustics - Determination of Sound Power Levels of Noise from Air-Terminal Devices, Air-Terminal Units, Dampers and Valves by Measurement in a Reverberation Room | |
| Acoustics - Determination of uncertainties associated with sound emission measures Part 1: Sound power levels determined from sound pressure measurements | |
| Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn | |
| Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture | |
| Acoustics - Hearing Protectors - Part 4: Measurement of Effective Sound Pressure Levels for Level-Dependent Sound-Restoration Ear Muffs | |
| Acoustics \x96 Hearing protectors Part 1: Subjective method for the measurement of sound attenuation | |
| Acoustics Determination of sound power radiated into a duct by fans and other air-moving devices In-duct method | |
| Agricultural machinery - Safety Part 10: Rotary tedders and rakes | |
| Agricultural machinery - Safety Part 11: Pick-up balers | |
| Agricultural machinery - Safety Part 12: Rotary disc and drum mowers and flail mowers | |
| Agricultural machinery - Safety Part 17: Root crop harvesters | |
| Agricultural machinery - Safety Part 1: General requirements | |
| Agricultural machinery - Safety Part 5: Power-driven soil-working machines | |
| Agricultural machinery - Safety Part 6: Sprayers and liquid fertilizer distributors | |
| Agricultural machinery - Safety Part 7: Combine harvesters, forage harvesters and cotton harvesters | |
| Agricultural machinery - Safety Part 8: Solid fertilizer distributors | |
| Agricultural machinery \x96 Safety Part 9: Seed drills | |
| Agricultural machinery \x97 Safety Part 14: Bale wrappers | |
| Agricultural machinery \x97 Safety Part 6: Sprayers and liquid fertilizer distributors | |
| Agricultural machinery Safety Part 1: General requirements | |
| Anaesthesiology - Vocabulary | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors | |
| Anaesthetic and respiratory equipment - Oropharyngeal airways | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors | |
| Anaesthetic and respiratory equipment \x97 Breathing sets and connectors | |
| Anaesthetic and respiratory equipment \x97 Conical connectors Part 2: Screw-threaded weight-bearing connectors | |
| Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets | |
| Anaesthetic and respiratory equipment Tracheostomy tubes Part 1: Tubes and connectors for use in adults | |
| Anaesthetic reservoir bags | |
| Anaesthetic vaporizers - Agent-specific filling systems | |
| Automatic steam traps - Production and performance characteristic tests | |
| Binders for Paints and Varnishes - Determination of Hydroxyl Value - Titrimetric Method | |
| Binders for paints and varnishes - Determination of hydroxyl value Part 1: Titrimetric method without using a catalyst | |
| Binders for paints and varnishes - Determination of hydroxyl value Part 2: Titrimetric method using a catalyst | |
| Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method | |
| Binders for paints and varnishes \x97 Determination of hydroxyl value Part 3: Rapid test | |
| Binders for paints and varnishes Determination of softening point Part 2: Cup-and-ball method | |
| Cellular Plastics - Determination of Volume Percentage of Open and Closed Cells of Rigid Materials | |
| Cellular Rubbers and Plastics - Determination of Dynamic Cushioning Performance | |
| Centrifugal, Mixed Flow and Axial Pumps - Code for Hydraulic Performance Tests - Precision Class | |
| Cereals and pulses - Determination of the mass of 1000 grains | |
| Clear liquids \x97 Estimation of colour by the Gardner colour scale | |
| Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual method | |
| Clear liquids Estimation of colour by the Gardner colour scale Part 2: Spectrophotometric method | |
| Construction Drawings - Designation Systems - Part 1: Buildings and parts of buildings | |
| Construction Drawings - Designation Systems - Part 2: Room Names and Numbers | |
| Construction Drawings - Designation Systems - Part 3: Room Identifiers | |
| Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts | |
| Cosmetics - Microbiology - Quality control of culture media and diluents used in cosmetics standards | |
| Cross Recesses for Screws | |
| Cycles \x97 Safety requirements for bicycles Part 1: Terms and definitions | |
| Cycles \x97 Safety requirements for bicycles Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles | |
| Cycles \x97 Safety requirements for bicycles Part 3: Common test methods | |
| Cycles \x97 Safety requirements for bicycles Part 4: Braking test methods | |
| Cycles \x97 Safety requirements for bicycles Part 5: Steering test methods | |
| Cycles \x97 Safety requirements for bicycles Part 6: Frame and fork test methods | |
| Cycles \x97 Safety requirements for bicycles Part 7: Wheels and rims test methods | |
| Cycles \x97 Safety requirements for bicycles Part 8: Pedal and drive system test methods | |
| Cycles \x97 Safety requirements for bicycles Part 9: Saddles and seat-post test methods | |
| Dentistry - Ceramic Denture Teeth | |
| Dentistry - Designation system for tooth development stages | |
| Dentistry - Elastomeric impression materials | |
| Dentistry - General requirements of hand instruments Part 1: Non-hinged hand instruments | |
| Dentistry - Mobile dental units and dental patient chairs Part 1: General requirements | |
| Dentistry - Mobile dental units and dental patient chairs Part 2: Air, water, suction and wastewater systems | |
| Dentistry - Polymer-based composite machinable blanks | |
| Dentistry \x97 Elastomeric impression and bite registration materials | |
| Destructive tests on welds in metallic materials - Bend tests | |
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints | |
| Destructive tests on welds in metallic materials - Transverse tensile test | |
| Driers for paints and varnishes | |
| Earth-moving machinery \x97 Wheeled machines \x97 Steering requirements | |
| Earth-Moving Machinery, and Tractors and Machinery for Agriculture and Forestry - Seat Index Point | |
| Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes | |
| Energy management systems - Guidelines for a phased implementation | |
| Energy management systems - Requirements with guidance for use | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads Part 3: Calculation procedures regarding adaptive building envelope elements | |
| Energy performance of buildings - Overarching EPB assessment Part 1: General framework and procedures | |
| Energy performance of buildings \x96 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads Part 1: Calculation procedures | |
| Energy performance of buildings \x96 Sensible and latent heat loads and internal temperatures Part 1: Generic calculation procedures | |
| Energy performance of buildings \x97 Building management system Part 1: Module M10-12 | |
| Energy performance of buildings \x97 Contribution of building automation, controls and building management Part 1: General framework and procedures | |
| Energy performance of buildings \x97 Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads Part 3: Calculation procedures regarding adaptive building envelope elements \x97 Amendment... | |
| Energy performance of buildings \x97 External climatic conditions Part 1: Conversion of climatic data for energy calculations | |
| Energy performance of buildings \x97 Indicators for partial EPB requirements related to thermal energy balance and fabric features Part 1: Overview of options | |
| Energy performance of buildings \x97 Indicators, requirements, ratings and certificates Part 1: General aspects and application to the overall energy performance | |
| Energy performance of buildings \x97 Thermal, solar and daylight properties of building components and elements Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices... | |
| Energy performance of buildings \x97 Thermal, solar and daylight properties of building components and elements Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices... | |
| Facility management - Development of a facility management policy | |
| Facility management - Guidance on emergency preparedness and management of an epidemic | |
| Facility management - Influencing organizational behaviours for improved facility outcomes | |
| Facility management - Vocabulary | |
| Facility management \x96 Guidance on strategic sourcing and the development of agreements | |
| Facility management \x96 Management systems \x96 Requirements with guidance for use | |
| Facility management \x97 Development of facility management strategy | |
| Fasteners - Ends of Parts with External ISO Metric Screw Thread | |
| Ferrous materials \x97 Heat treatments \x97 Vocabulary | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at high temperature \x97 Determination of uniaxial tensile properties of tubes | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers Part 1: Terminology and common tests | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers Part 2: Pedestrian-controlle d lawnmowers | |
| Garden equipment \x97 Safety requirements for combustion-engine-po wered lawnmowers Part 1: Terminology and common tests | |
| Garden equipment \x97 Safety requirements for combustion-engine-po wered lawnmowers Part 2: Pedestrian-controlle d lawnmowers | |
| Garden equipment \x97 Safety requirements for combustion-engine-po wered lawnmowers Part 3: Ride-on lawnmowers with seated operator | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests | |
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes | |
| Gas welding equipment - Safety devices Part 1: Devices incorporating a flame (flashback) arrestor | |
| Gas welding equipment - Safety devices Part 2: Devices not incorporating a flame (flashback) arrestor | |
| Geometric Product Specification (GPS) - Surface Texture - Profile Method: Rules and Procedures for the Assessment of Surface Texture | |
| Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture Parameters | |
| Geometrical product specifications (GPS) - Association | |
| Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems | |
| Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing | |
| Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics | |
| Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 1: Material Measures | |
| Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 2: Software Measurement Standards | |
| Geometrical product specifications (GPS) \x97 Dimensional measuring equipment Part 1: Design and metrological characteristics of two-point inside micrometers | |
| Hand- and machine-operated circular screwing dies for parallel pipe threads - G series | |
| Hand- and machine-operated circular screwing dies for taper pipe threads \x97 R series | |
| Hardmetals - Compression test | |
| Hardmetals - Metallographic determination of microstructure Part 1: Photomicrographs and description | |
| Hardmetals - Metallographic determination of microstructure Part 2: Measurement of WC grain size | |
| Hardmetals - Metallographic determination of microstructure Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals | |
| Hardmetals \x96 Sampling and testing of powders using sintered test pieces | |
| Hardmetals \x96 Sampling and testing | |
| Hardmetals \x97 Metallographic determination of microstructure Part 4: Characterisation of porosity, carbon defects and eta-phase content | |
| Hexagon Socket Head Cap Screws | |
| Household Refrigerating Appliances - Frozen Food Storage Cabinets and Food Freezers - Characteristics and Test Methods | |
| Hydraulic fluid power - General rules and safety requirements for systems and their components | |
| Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM) | |
| Hydrometric determinations Cableway systems for stream gauging | |
| Hydrometry - Water level measuring devices | |
| Industrial Valves - Multi-Turn Valve Actuator Attachments | |
| Industrial Valves - Part-Turn Actuator Attachments | |
| Investigation of brazeability with spreading and gap-filling test | |
| Knitting - Basic Concepts - Vocabulary | |
| Laboratory glassware - Borosilicate glass tubing | |
| Laboratory Glassware - Bottles - Part 1: Screw-Neck Bottles | |
| Laboratory Glassware - Bottles - Part 2: Conical Neck Bottles | |
| Laboratory Glassware - Bottles - Part 3: Aspirator Bottles | |
| Laboratory glassware - Graduated measuring cylinders | |
| Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use | |
| Laboratory glassware Boiling flasks with conical ground joints | |
| Laboratory Glassware Test Tubes | |
| Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration | |
| Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry | |
| Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma-optical emission spectrometer (ICP-OES) | |
| Leather - Chemical determination of chromic oxide content Part 2: Quantification by colorimetric determination | |
| Leather - Chemical tests - Determination of volatile matter | |
| Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter | |
| Leather - Determination of flex resistance Part 1: Flexometer method | |
| Leather - Determination of flex resistance Part 2: Vamp flex method | |
| Leather - Determination of water resistance of flexible leather Part 1: Repeated linear compression (penetrometer) | |
| Leather - Determination of water resistance of flexible leather Part 2: Repeated angular compression (Maeser) | |
| Leather - Determination of Water-Soluble Magnesium Salts - EDTA Titrimetric Method | |
| Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers | |
| Leather - Physical and mechanical tests - Determination of water resistance of flexible leather | |
| Leather Physical and mechanical tests Determination of flex resistance by flexometer method | |
| Lithopone pigments - General requirements and methods of testing | |
| Loading and unloading of liquefied natural gas (LNG) tank wagons and containers | |
| Low-pressure hose assemblies for use with medical gases | |
| Manual Blowpipes for Welding, Cutting and Heating - Specifications and Tests | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 5: Cone meters | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 6: Wedge meters | |
| Measurement of Fluid Flow by Means of Pressure Differential Devices Part 1: Orifice Plates, Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full | |
| Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 1: General Requirements | |
| Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace | |
| Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) | |
| Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests | |
| Metallic and other inorganic coatings \x97 Electrodeposited silver and silver alloy coatings for engineering purposes \x97 Specification and test methods | |
| Metallic and other non-organic coatings - Corrodkote test (CORR test) | |
| Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods | |
| Metallic coatings - coatings cathodic 60 the substrate - Rating of electroplated test specimens subjected to corrosion tests | |
| Metallic coatings - Electroplated coatings of nickel for engineering purposes | |
| Metallic coatings - Measurement of coating thickness - Profilometric method | |
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity | |
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6. Determination of the presence of residual salts | |
| Metallic coatings - Thioacetamide corrosion test (TAA test) | |
| Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks | |
| Metallic materials Knoop hardness test Part 1: Test method | |
| Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines | |
| Metallic materials Knoop hardness test Part 4: Table of hardness values | |
| Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders | |
| Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter) | |
| Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 2: Loss of Mass on Hydrogen Reduction (Hydrogen Loss) | |
| Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen | |
| Metallic powders - Determination of oxygen content by reduction methods Part 4: Total oxygen by reduction-extraction | |
| Metallic powders \x96 Determination of particle size by dry sieving | |
| Metallic powders \x97 Determination of oxygen content by reduction methods Part 1: General guidelines | |
| Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 degrees C | |
| Microbiology of the food chain - Horizontal method for the enumeration of microorganisms Part 1: Colony count at 30 \xb0C by the pour plate technique | |
| Microbiology of the food chain \x97 Horizontal method for the enumeration of microorganisms \x97 Part 2: Colony count at 30 degrees C by the surface plating technique | |
| Microbiology of the food chain \x97 Horizontal method for the enumeration of microorganisms Part 1: Colony count at 30 degrees C by the pour plate technique | |
| Microbiology of the food chain \x97 Horizontal method for the enumeration of microorganisms Part 2: Colony count at 30 \xb0C by the surface plating technique | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for saliva - Isolated human DNA | |
| Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) for thin-walled steel components - Acceptance levels | |
| Non-Ionic Surface Active Agents - Determination of Cloud Point Index Volumetric Method | |
| Occupational health and safety management systems - Requirements with guidance for use | |
| Occupational health and safety management systems Requirements with guidance for use | |
| Oilseeds - Sampling | |
| Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules | |
| Paints and Varnishes - Determination of Resistance to Filiform Corrosion - Part 1: Steel Substrates | |
| Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking... | |
| Paints and Varnishes - List of Equivalent Terms | |
| Paints and varnishes - Pressure test for stackability | |
| Paints and Varnishes - Terms and Definitions for Coating Materials - Part 2: Special Terms Relating to Paint Characteristics and Properties | |
| Paints and Varnishes - Terms and Definitions for Coating Materials - Part 3: Surface Preparation and Methods of Application | |
| Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 10: Assessment of degree of filiform... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 5: Assessment of degree of flaking... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking... | |
| Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination... | |
| Paints and varnishes Pull-off test for adhesion | |
| Paints and varnishes Terms and definitions | |
| Pallets for materials handling. Vocabulary | |
| Paper and board - Determination of grammage | |
| Paper and board \x97 Determination of water absorptiveness \x97 Cobb method | |
| Paper and board Determination of thickness, density and specific volume | |
| Petroleum and its products Part 41. Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method | |
| Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurements | |
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils | |
| Petroleum and related products - Precision of measurement methods and results Part 1: Determination of precision data in relation to methods of test | |
| Petroleum and related products - Precision of measurement methods and results Part 4: Use of statistical control charts to validate 'in-statistical-cont rol' status for the execution of a standard test... | |
| Petroleum and related products - Precision of measurement methods and results Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property | |
| Petroleum and related products \x96 Precision of measurement methods and results Part 2: Interpretation and application of precision data in relation to methods of test | |
| Petroleum and related products \x96 Precision of measurement methods and results Part 3: Monitoring and verification of published precision data in relation to methods of test | |
| Petroleum and related products \x97 Determination of the ageing behaviour of inhibited oils and fluids \x97 TOST test \x97 Part 4: Procedure for industrial gear oils | |
| Petroleum and related products \x97 Precision of measurement methods and results Part 1: Determination of precision data in relation to methods of test | |
| Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids | |
| Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids | |
| Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 1: Water-containing fluids | |
| Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids | |
| Petroleum Products - Calculation of Cetane Index of Middle-Distillate Fuels by the Four-Variable Equation | |
| Petroleum products \x97 Determination and application of precision data in relation to methods of test | |
| Petroleum products \x97 Determination of knock characteristics of motor and aviation fuels \x97 Motor method | |
| Petroleum products \x97 Determination of knock characteristics of motor fuels \x97 Research method | |
| Photography - Medical radiographic cassettes/screens/fi lms and hard-copy imaging films - Dimensions and specifications | |
| Plastics - Determination of Burning Behaviour by Oxygen Index - Part 1: Guidance | |
| Plastics - Determination of Burning Behaviour by Oxygen Index - Part 2: Ambient-Temperature Test | |
| Plastics - Determination of Burning Behaviour by Oxygen Index Part 3: Elevated-Temperature Test | |
| Plastics - Determination of Environmental Stress Cracking (ESC) - Ball or Pin Impression Method | |
| Plastics - Determination of Refractive Index | |
| Plastics - Determination of Resistance to Environmental Stress Cracking (ESC) - Bent Strip Method | |
| Plastics - Determination of tensile properties - Part 1: General principles | |
| Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics | |
| Plastics - Determination of Tensile Properties Part 3: Test Conditions for Films and Sheets | |
| Plastics - Determination of Tensile Properties Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | |
| Plastics - Determination of Tensile Properties Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites | |
| Plastics - Epoxy Resins and Related Materials - Determination of Easily Saponifiable Chlorine | |
| Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 1: Designation and Specification | |
| Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Hardeners and Accelerators for Epoxide Resins Part 1: Designation | |
| Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride for General Use - Determination of Plasticizer Absorption at Room Temperature | |
| Plastics - Liquid Epoxy Resins - Determination of Tendency to Crystallize | |
| Plastics - Melamine-Formaldehyd e Mouldings - Determination of Extractable Formaldehyde | |
| Plastics - Methods of Exposure of Laboratory Light Sources - Part 2: Xenon Arc Sources | |
| Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance | |
| Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | |
| Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps | |
| Plastics - Polypropylene and Propylene-Copolymers - Determination of Thermal Oxidative Stability in Air - Oven Method | |
| Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method | |
| Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain Relative Humidity at Constant Value | |
| Plastics - Styrene/acrylonitril e (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Styrene/acrylonitril e (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Unsaturated Polyesters and Epoxide Resins - Determination of Total Chlorine Content | |
| Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis Using Air-Jet Sieve Apparatus | |
| Plastics - Vocabulary | |
| Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist | |
| Pneumatic fluid power. General rules and safety requirements for systems and their components | |
| Polyolefin agricultural twines | |
| Pulp - Estimation of Dirt and Shives - Part 1: Inspection of Laboratory Sheets | |
| Pulp - Estimation of Dirt and Shives - Part 2: Inspection of Mill Sheeted Pulp | |
| Pulps - Determination of Drainability - Part 1: Schopper-Riegler Method | |
| Pulps - Determination of stock concentration | |
| Pulps - Laboratory Sheets - Determination of Physical Properties | |
| Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps | |
| Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 Degrees C | |
| Pulps - Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at greater than 85 Degree C | |
| Pulps - Laboratory Wet Disintegration | |
| Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method | |
| Pulps - Preparation of Laboratory Sheets for Physical Testing - Part 2: Rapid-Kothen Method | |
| Pulps Laboratory beating Part 2: PFI mill method | |
| Pulps. Estimation of dirt and shives. Inspection of laboratory sheets | |
| Resilient, textile and laminate floor coverings - Castor chair test | |
| Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes | |
| Resistance welding - Materials for electrodes and ancillary equipment | |
| Resistance Welding Equipment - Electrode Adaptors, Male Taper 1:10 - Part 1: Conical Fixing, Taper 1:10 | |
| Road Vehicles - Electrical Connections - Double-Pole Connection | |
| Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests | |
| Rubber and Plastics Hoses and Hose Assemblies - Determination of Permeability to Gas | |
| Rubber and Plastics Hoses and Hose Assemblies - Methods of Measurement of Dimensions | |
| Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies | |
| Rubber hoses and hose assemblies for water suction and discharge - Specification | |
| Rubber- or Plastics-Coated Fabrics - Determination of Abrasion Resistance - Part 1: Taber Abrader | |
| Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods | |
| Rubber- or Plastics-Coated Fabrics - Determination of Tear Resistance - Part 2: Ballistic Pendulum Method | |
| Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader | |
| Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination | |
| Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices | |
| Safety devices for protection against excessive pressure Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow | |
| Safety devices for protection against excessive pressure Part 1: Safety valves | |
| Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices | |
| Safety devices for protection against excessive pressure Part 4: Pilot operated safety valves | |
| Safety devices for protection against excessive pressure Part 5: Controlled safety pressure relief systems (CSPRS) | |
| Safety devices for protection against excessive pressure Part 7: Common data | |
| Sensory analysis - Methodology - Paired comparison test | |
| Sensory analysis - Methodology - Triangle test | |
| Sensory analysis - Vocabulary | |
| Sensory analysis \x97 Vocabulary | |
| Ships and Marine Technology - Magnetic Compasses, Binnacles and Azimuth Reading Devices - Class A | |
| Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test | |
| Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness | |
| Sisal Agricultural Twines | |
| Slotted set screws with flat point | |
| Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements | |
| Solid biofuels - Determination of fines content in pellets | |
| Solid recovered fuels \x97 Determination of the Recycling Index for co-processing | |
| Steel - Determination of nitrogen content - Spectrophotometric method | |
| Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 % and 1,0 % | |
| Steel and cast iron \x96 Determination of vanadium content \x96 Potentiometric titration method | |
| Steel and cast iron \x97 Determination of copper content \x97 Flame atomic absorption spectrometric method | |
| Steel and cast iron \x97 Determination of copper\x97 2,2'-Biquinoline spectrophotometric method | |
| Steel and iron - Determination of sulfur content - Gravimetric method | |
| Steel and iron - Determination of total silicon content - Gravimetric method | |
| Steel and iron \x97 Determination of chromium content \x97 Potentiometric or visual titration method | |
| Steel and iron \x97 Determination of nickel content \x97 Gravimetric or titrimetric method | |
| Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 % | |
| Technical Drawings - Construction Drawings - Drawings for the Assembly of Prefabricated Structures | |
| Technical drawings - Projection methods - Part 3: Axonometric representations | |
| Technical Drawings - Scales | |
| Technical Drawings - Simplified Representation of Bars and Profile Sections | |
| Technical drawings Projection methods Part 1: Synopsis | |
| Technical drawings Projection methods Part 2: Orthographic representations | |
| Technical Product Documentation - Sizes and Layout of Drawing Sheets | |
| Technical Specifications for Centrifugal Pumps - Class II | |
| Test sieves for cereals | |
| Textile fabrics - Determination of resistance to surface wetting (spray test) | |
| Textiles - Animal welfare in the supply chain - General requirements for the production, preparation and traceability of Angora rabbit fibre, including ethical claims and supporting information | |
| Textiles - Determination of dimensional change in washing and drying | |
| Textiles - Determination of Thickness of Textiles and Textile Products | |
| Textiles - Fibres - Determination of Breaking Force and Elongation at Break of Individual Fibres | |
| Textiles - Preparation of laboratory test samples and test specimens for chemical testing | |
| Textiles \x97 Environmental aspects \x97 Vocabulary | |
| Textiles and textile products - Microplastics from textile sources Part 1: Determination of material loss from fabrics during washing | |
| Textiles and textile products - Microplastics from textile sources Part 3: Measurement of collected material mass released from textile end products by domestic washing method | |
| Tolerances for Fasteners - Part 1: Bolts, Screws, Studs and Nuts - Product Grades A, B and C | |
| Tolerances for Fasteners - Part 3: Plain Washers for Bolts, Screws and Nuts - Product Grades A and C | |
| Tool Steels | |
| Tracked Changes (Redline) - Acoustics \x96 Hearing protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn | |
| Tracked Changes (Redline) - Agricultural machinery \x97 Safety Part 1: General requirements | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - Anaesthetic reservoir bags | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - Conical connectors Part 1: Cones and sockets | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - Oropharyngeal airways | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - Vocabulary | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment \x97 Breathing sets and connectors | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment \x97 Tracheal tubes and connectors | |
| Tracked Changes (Redline) - Anaesthetic vaporizers - Agent-specific filling systems | |
| Tracked Changes (Redline) - Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles - Part 1: Vocabulary | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles - Part 3: Common test methods | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles - Part 5: Steering test methods | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods | |
| Tracked Changes (Redline) - Cycles - Safety requirements for bicycles Part 4: Braking test methods | |
| Tracked Changes (Redline) - Cycles \x97 Safety requirements for bicycle \x97 Part 7: Wheel and rim test methods | |
| Tracked Changes (Redline) - Cycles \x97 Safety requirements for bicycles \x97 Part 8: Pedal and drive system test methods | |
| Tracked Changes (Redline) - Cycles \x97 Safety requirements for bicycles Part 2: Requirements for city and trekking, young adult mountain and racing bicycles | |
| Tracked Changes (Redline) - Dentistry - Elastomeric impression materials | |
| Tracked Changes (Redline) - Dentistry - Mobile dental units and dental patient chairs - Part 1: General requirements | |
| Tracked Changes (Redline) - Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints | |
| Tracked Changes (Redline) - Destructive tests on welds in metallic materials - Transverse tensile test | |
| Tracked Changes (Redline) - Driers for paints and varnishes | |
| Tracked Changes (Redline) - Earth-moving machinery - Wheeled machines - Steering requirements | |
| Tracked Changes (Redline) - Energy management systems - Requirements with guidance for use | |
| Tracked Changes (Redline) - Energy management systems. Requirements with guidance for use. Guidance for the implementation, maintenance and improvement of an ISO 50001 energy management system | |
| Tracked Changes (Redline) - Energy performance of buildings - Contribution of building automation, controls and building managem - Part 1: General framework and procedures | |
| Tracked Changes (Redline) - Facility management - Vocabulary | |
| Tracked Changes (Redline) - Fasteners \x97 Slotted set screws with flat point | |
| Tracked Changes (Redline) - Ferrous materials - Heat treatments - Vocabulary | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification | |
| Tracked Changes (Redline) - Hydrometry \x97 Water level measuring devices | |
| Tracked Changes (Redline) - Industrial valves - Multi-turn valve actuator attachments | |
| Tracked Changes (Redline) - Industrial valves \x97 Part-turn actuator attachments | |
| Tracked Changes (Redline) - Laboratory glass and plastic ware \x97 Volumetric instruments \x97 Methods for testing of capacity and for use | |
| Tracked Changes (Redline) - Laboratory glassware - Bottles Part 1: Screw-neck bottles | |
| Tracked Changes (Redline) - Leather - Chemical determination of chromic oxide content Part 1: Quantification by titration | |
| Tracked Changes (Redline) - Leather - Chemical determination of chromic oxide content Part 3: Quantification by atomic absorption spectrometry | |
| Tracked Changes (Redline) - Leather - Chemical determination of chromic oxide content Part 4: Quantification by inductively coupled plasma (ICP) | |
| Tracked Changes (Redline) - Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter | |
| Tracked Changes (Redline) - Leather - Determination of flex resistance Part 1: Flexometer method | |
| Tracked Changes (Redline) - Leather - Determination of flex resistance Part 2: Vamp flex method | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full \x97 Part 3: Nozzles and Venturi nozzles | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements | |
| Tracked Changes (Redline) - Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes | |
| Tracked Changes (Redline) - Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity | |
| Tracked Changes (Redline) - Metallic materials - Knoop hardness test Part 1: Test method | |
| Tracked Changes (Redline) - Metallic materials - Knoop hardness test Part 3: Calibration of reference blocks | |
| Tracked Changes (Redline) - Metallic materials - Knoop hardness test Part 4: Table of hardness values | |
| Tracked Changes (Redline) - Metallic materials \x97 Knoop hardness test Part 2: Verification and calibration of testing machines | |
| Tracked Changes (Redline) - Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) | |
| Tracked Changes (Redline) - Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen | |
| Tracked Changes (Redline) - Metallic powders - Determination of oxygen content by reduction methods Part 4: Total oxygen by reduction-extraction | |
| Tracked Changes (Redline) - Metallic powders \x96 Determination of flow rate by means of a calibrated funnel (Hall flowmeter) | |
| Tracked Changes (Redline) - Metallic powders, excluding powders for hardmetals \x97 Determination of dimensional changes associated with compacting and sintering | |
| Tracked Changes (Redline) - Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for saliva - Isolated human DNA | |
| Tracked Changes (Redline) - Natural rubber latex male condoms \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of resistance to filiform corrosion Part 1: Steel substrates | |
| Tracked Changes (Redline) - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part... | |
| Tracked Changes (Redline) - Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of... | |
| Tracked Changes (Redline) - Paints and varnishes - Pull-off test for adhesion | |
| Tracked Changes (Redline) - Paints and varnishes - Vocabulary | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Determination of resistance to filiform corrosion Part 2: Aluminium substrates | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Evaluation of degradation of coatings \x97 Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part... | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance \x97 Part 10: Assessment of degree of... | |
| Tracked Changes (Redline) - Paper and board - Determination of water absorptiveness - Cobb method | |
| Tracked Changes (Redline) - Paper and board \x97 Determination of grammage | |
| Tracked Changes (Redline) - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation | |
| Tracked Changes (Redline) - Plastics - Determination of burning behaviour by oxygen index Part 1: General requirements | |
| Tracked Changes (Redline) - Plastics - Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test | |
| Tracked Changes (Redline) - Plastics - Determination of burning behaviour by oxygen index Part 3: Elevated-temperature test | |
| Tracked Changes (Redline) - Plastics - Determination of refractive index | |
| Tracked Changes (Redline) - Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics | |
| Tracked Changes (Redline) - Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites | |
| Tracked Changes (Redline) - Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | |
| Tracked Changes (Redline) - Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature | |
| Tracked Changes (Redline) - Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method | |
| Tracked Changes (Redline) - Plastics \x96 Determination of tensile properties Part 3: Test conditions for films and sheets | |
| Tracked Changes (Redline) - Plastics \x97 Methods of exposure to laboratory light sources \x97 Part 3: Fluorescent UV lamps | |
| Tracked Changes (Redline) - Plastics \x97 Methods of exposure to laboratory light sources Part 1: General guidance | |
| Tracked Changes (Redline) - Pulps - Laboratory sheets - Determination of physical properties | |
| Tracked Changes (Redline) - Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at = 85\xb0C | |
| Tracked Changes (Redline) - Resistance welding \x97 Materials for electrodes and ancillary equipment | |
| Tracked Changes (Redline) - Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells | |
| Tracked Changes (Redline) - Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies | |
| Tracked Changes (Redline) - Rubber and plastics hoses and tubing, and their assemblies - Determination of permeability to gas | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies for water suction and discharge \x97 Specification | |
| Tracked Changes (Redline) - Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader | |
| Tracked Changes (Redline) - Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method | |
| Tracked Changes (Redline) - Rubber- or plastics-coated fabrics \x97 Determination of tear resistance Part 1: Constant rate of tear methods | |
| Tracked Changes (Redline) - Safety devices for protection against excessive pressure \x97 Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow | |
| Tracked Changes (Redline) - Safety devices for protection against excessive pressure Part 1: Safety valves | |
| Tracked Changes (Redline) - Small medical gas cylinders - Pin-index yoke-type valve connection | |
| Tracked Changes (Redline) - Steel - Determination of nitrogen \x96 Spectrophotometric method | |
| Tracked Changes (Redline) - Steel and cast iron - Determination of copper content - Flame atomic absorption spectrometric method | |
| Tracked Changes (Redline) - Steel and iron - Determination of chromium content - Potentiometric or visual titration method | |
| Tracked Changes (Redline) - Technical product documentation (TPD) - Construction documentation - Drawings for the assembly of prefabricated structures | |
| Tracked Changes (Redline) - Tolerances for fasteners Part 3: Washers for bolts, screws and nuts - Product grades A, C and F | |
| Tracked Changes (Redline) - Tool steels | |
| Tracked Changes (Redline) - Vitreous and porcelain enamel finishes \x97 Selection of test methods for vitreous and porcelain enamelled areas of articles | |
| Tracked Changes (Redline) - Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat | |
| Tracked Changes (Redline) - Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits | |
| Tracked Changes (Redline) - Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings | |
| Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles | |
| Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat | |
| Vitreous and Porcelain Enamels - Apparatus for Determination of Resistance to Hot Detergent Solutions Used for Washing Textiles | |
| Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test | |
| Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test | |
| Vitreous and porcelain enamels \x96 Release from enamelled articles in contact with food \x96 Methods of test and limits | |
| Welding consumables Technical delivery conditions for welding filler metals Type of product, dimensions, tolerances and markings |
| << Prev | Next >> |