Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
354
355
356
357
358
359
360
361
362
363
364
365
366
370
380
390
400
410
420
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method) | |
| Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness | |
| Advanced technical ceramics - Monolithic ceramics - General and textural properties Part 5: Determination of phase volume fraction by evaluation of micrographs | |
| Advanced Technical Ceramics - Monolithic Ceramics General and Textural Properties Part 1: Determination of the Presence of Defects by Dye Penetration Tests | |
| Advanced technical ceramics \x97 Monolithic ceramics \x97 General and textural properties \x97 Part 2: Determination of density and porosity | |
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) | |
| Assessment of lighting equipment related to human exposure to electromagnetic fields | |
| Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) | |
| Audio/video, information and communication technology equipment Part 1: Safety requirements | |
| Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT) | |
| Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) | |
| Bushings for d.c. application | |
| Cable glands for electrical installations | |
| Cable management systems - Cable ties for electrical installations | |
| Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones | |
| Common control interface for networked digital audio and video products - Part 1: General | |
| Common control interface for networked digital audio and video products - Part 2: Audio | |
| Common control interface for networked digital audio and video products Part 3: Video | |
| Common control interface for networked digital audio and video products Part 5-1: Transmission over networks \x97 General | |
| Common control interface for networked digital audio and video products Part 5-2: Transmission over networks \x97 Signalling (TA4) | |
| Common control interface for networked digital audio and video products Part 7: Measurements | |
| Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria | |
| Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV Part 1: Dimensional, mechanical and electrical characteristics | |
| Concentric lay stranded overhead electrical conductors containing one or more gap(s) | |
| Connectors for electronic equipment Quality assessment requirements Part 1: Generic specification | |
| Consumer audio/video equipment digital interface with plastic optical fibre | |
| Control technology - Rules for the designation of measuring instruments | |
| DC or AC supplied electronic control gear for LED modules - Performance requirements | |
| DC or AC supplied electronic control gear for LED modules Performance requirements | |
| Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) | |
| Dependability of products containing reused parts Requirements for functionality and tests | |
| Determination of certain substances in electrotechnical products Part 1 Introduction and Overview | |
| Determination of certain substances in electrotechnical products Part 2: Disassembly, disjointment and mechanical sample preparation | |
| Determination of certain substances in electrotechnical products Part 3-1: Screening \x97 Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry | |
| Determination of certain substances in electrotechnical products Part 3-2: Screening \x97 Total bromine in polymers and electronics by Combustion \x97 Ion Chromatography | |
| Determination of certain substances in electrotechnical products Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS | |
| Determination of certain substances in electrotechnical products Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography\x96ma ss spectrometry (GC-MS) | |
| Determination of certain substances in electrotechnical products Part 7-1: Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method | |
| Determination of certain substances in electrotechnical products Part 7-2: Hexavalent chromium \x97 Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method | |
| Determination of certain substances in electrotechnical products Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) | |
| Determination of certain substances in electrotechnical productsPart 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MSBS | |
| Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure | |
| Digital addressable lighting interface - Part 101: General requirements - System | |
| Digital addressable lighting interface - Part 102: General requirements - Control gear | |
| Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) | |
| Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) | |
| Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) | |
| Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage halogen lamps (device type 3) | |
| Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) | |
| Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5) | |
| Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) | |
| Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type 7) | |
| Digital addressable lighting interface Part 101: General requirements - System components | |
| Digital addressable lighting interface Part 103: General requirements - Control devices | |
| Digital addressable lighting interface Part 103: General requirements \x97 Control devices | |
| Digital addressable lighting interface Part 209: Particular requirements for control gear - Colour control (device type 8) | |
| Digital addressable lighting interface Part 210: Particular requirements for control gear - Sequencer (device Type 9) | |
| Digital addressable lighting interface Part 301: Particular requirements - Input devices - Push buttons | |
| Digital addressable lighting interface Part 302: Particular requirements \x96 Input devices \x96 Absolute input devices | |
| Digital addressable lighting interface Part 303: Particular requirements - Input devices - Occupancy sensor | |
| Digital addressable lighting interface Part 304: Particular requirements - Input devices - Light sensor | |
| Digital audio Digital input-output interfacing Transmission of digital audio over asynchronous transfer mode (ATM) networks | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Architecture and protocols | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: DLNA media formats | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 3: Link protection | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions (TA9) | |
| Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5-1: DLNA Device Profile guidelines | |
| Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters | |
| Digital Radio Mondiale (DRM) Part 1: System specification | |
| Digital terrestrial television receivers for the DVB-T system | |
| Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S) | |
| Dimensions of half pot-cores made of ferrite for inductive proximity switches | |
| DTV profiles for uncompressed digital video interfaces Part 1: General | |
| Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C) | |
| Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C) | |
| Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement | |
| Dynamic modules \x97 General and guidance | |
| Dynamic modules Part 1: Performance standards - General conditions | |
| Dynamic modules Part 2: Reliability qualification | |
| Dynamic modules Part 3-1: Performance specification templates - Dynamic channel equalizers | |
| Dynamic modules Part 3-2: Performance specification templates \x97 Optical channel monitor | |
| Dynamic modules Part 3-3: Performance specification templates - Wavelength selective switches | |
| Dynamic modules Part 4-1: Software and hardware interface \x97 1 x 9 wavelength selective switch | |
| Electric cables - Spark-test method | |
| Electric power engineering - Modal components in three-phase a.c. systems - Quantities and transformations | |
| Electrical and instrumentation loop check | |
| Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing requirements | |
| Electrical resistance trace heating systems for industrial and commercial applications Part 2: Application guide for system design, installation and maintenance | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing Part 1: Methods of measuring and specifying the performance of system components | |
| Electroacoustics - Audio-frequency induction loop systems for assisted hearing Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on... | |
| Electroacoustics \x97 Audio-frequency induction loop systems for assisted hearing Part 1: Methods of measuring and specifying the performance of system components | |
| Electronic components \x97 Long-term storage of electronic semiconductor devices Part 1: General | |
| Electronic components \x97 Long-term storage of electronic semiconductor devices Part 2: Deterioration mechanisms | |
| Electronic components \x97 Long-term storage of electronic semiconductor devices Part 5: Die and wafer devices | |
| Electronics assembly technology - Electronic modules | |
| Electronics assembly technology Part 3: Selection guidance of environmental and endurance test methods for solder joints | |
| Electronics assembly technology Part 4: Endurance test methods for solder joint of area array type package surface mount devices | |
| Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) | |
| EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE) | |
| EMC IC modelling Part 3: Models of integrated Circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE) | |
| EMC IC modelling Part 4: Models of integrated circuits for RF immunity behavioural simulation \x97 Conducted immunity modelling (ICIM-CI) | |
| Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements | |
| Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear... | |
| Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear | |
| Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) \x97 Method of measurement to determine the efficiency of controlgear | |
| Energy performance of lamp controlgear Part 3: Controlgear for halogen lamps and LED modules \x96 Method of measurement to determine the efficiency of the controlgear | |
| Energy performance of lamp controlgear Part 3: Controlgear for halogen lamps and LED modules \x97 Method of measurement to determine the efficiency of the controlgear | |
| Enterprise system integration Part 5: Business to manufacturing transactions | |
| Enterprise-control system integration - Part 1: Models and terminology | |
| Enterprise-control system integration - Part 2: Object model attributes | |
| Enterprise-control system integration - Part 3: Activity models of manufacturing operations management | |
| Enterprise-control system integration Part 4: Object model attributes for manufacturing operations management integration | |
| Environmental and endurance testing Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN | |
| Environmentally conscious design for electrical and electronic products | |
| Equipment reliability - Reliability assessment methods | |
| ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment | |
| ESL measuring method Part 2: Surface mount capacitors for use in electronic equipment | |
| Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by... | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body -... | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current density and internal electric field induced in the human body Part 1:... | |
| Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current density and internal electric field induced in the human body Part 2-1:... | |
| Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications | |
| Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications | |
| Ferrite cores - Dimensions - Part 1: General specification | |
| Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications | |
| Ferrite cores - Dimensions - Part 8: E-cores | |
| Ferrite cores - Dimensions Part 12: Ring cores | |
| Ferrite cores \x97 Dimensions Part 11: EC-cores for use in power supply applications | |
| Ferrite cores \x97 Dimensions Part 5: EP-cores and associated parts for use in inductors and transformers | |
| Ferrite cores \x97 Dimensions Part 6: ETD-cores for use in power supplies | |
| Ferrite cores Dimensions Part 4: RM-cores and associated parts | |
| Ferrite cores Dimensions Part 7: EER-cores | |
| Ferrite cores Dimensions Part 9: Planar cores | |
| Ferrite cores Standard inductance factor (AL) and its tolerance | |
| Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters | |
| Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages | |
| Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver components for use with LC connector interface | |
| Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers | |
| Fibre Optic Active Components and Devices - Package and Interface Standards - Part 8: SFF LC 20-Pin Transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 2: SFF 10-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 2: SFF MT-RJ 10-pin transceivers | |
| Fibre optic active components and devices - Package and interface standards Part 3: SFF MT-RJ 20-pin transceivers | |
| Fibre Optic Active Components and Devices - Packages and Interface Standards - Part 1: General and Guidance | |
| Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs | |
| Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers | |
| Fibre optic active components and devices - Performance standards Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices | |
| Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical connectors and transceiver interfaces | |
| Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system | |
| Fibre optic active components and devices - Test and measurement procedures Part 5: Wavelength channel tuning time of tuneable transmitters | |
| Fibre optic active components and devices \x97 Package and interface standards Part 17: Transmitter and receiver components with dual coaxial RF connectors | |
| Fibre optic active components and devices \x97 Package and interface standards Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface | |
| Fibre optic active components and devices \x97 Performance standards Part 8: Seeded reflective semiconductor optical amplifier devices | |
| Fibre optic active components and devices \x97 Performance standards Part 9: Seeded reflective semiconductor optical amplifier transceivers | |
| Fibre optic active components and devices Package and interface standards Part 10: SFF MU duplex 20-pin transceivers | |
| Fibre optic active components and devices Package and interface standards Part 12: Laser transmitters with coaxial RF connector | |
| Fibre optic active components and devices Package and interface standards Part 4: PN 1x9 plastic optical fibre transceivers | |
| Fibre optic active components and devices Package and interface standards Part 5: SC 1x9 fibre optic modules | |
| Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers | |
| Fibre optic active components and devices Package and interface standards Part 9: SFF MU duplex 10-pin transceivers | |
| Fibre optic active components and devices Performance standards Part 1: General and guidance | |
| Fibre optic active components and devices Performance standards Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters | |
| Fibre optic active components and devices Performance standards Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic active components and devices Test and measurement procedures Part 1: General and guidance | |
| Fibre optic active components and devices Test and measurement procedures Part 2: ATM-PON transceivers | |
| Fibre optic enclosures Part 1: Generic specification | |
| Fibreboards - Specifications Part 1: General Requirements | |
| Fibreboards - Specifications Part 2: Requirements for Hardboards | |
| Fibreboards - Specifications Part 3: Requirements for Medium Boards | |
| Fibreboards - Specifications Part 4: Requirements for Softboards | |
| Fibreboards - Specifications Part 5: Requirements for Dry Process Boards (MDF) | |
| Field device tool (FDT) interface specification - Part 1: Overview and guidance | |
| Field device tool (FDT) interface specification - Part 2: Concepts and detailed description | |
| Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 | |
| Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 | |
| Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 | |
| Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15 | |
| Field device tool (FDT) interface specification Part 301: Communication profile integration - IEC 61784 CPF 1 | |
| Field device tool (FDT) interface specification Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 | |
| Field device tool (FDT) interface specification Part 315: Communication profile integration - IEC 61784 CPF 15 | |
| Fixed electric double-layer capacitors for use in electronic equipment Part 1: Generic specification | |
| Fixed electric double-layer capacitors for use in electronic equipment Part 2-1: Blank detail specification Electric double-layer capacitors for power application Assessment level EZ | |
| Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification Electric double-layer capacitors for power application | |
| Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets | |
| Framework for energy market communications Part 351: CIM European market model exchange profile | |
| Framework for energy market communications Part 450: Profile and context modelling rules | |
| Framework for energy market communications Part 451-1: Acknowledgement business process and contextual model for CIM European market | |
| Framework for energy market communications Part 451-2: Scheduling business process and contextual model for CIM European market | |
| Framework for energy market communications Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market | |
| Framework for energy market communications Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market | |
| Framework for energy market communications Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market | |
| Framework for energy market communications Part 451-6: Publication of information on market, contextual and assembly models for European style market | |
| Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety | |
| Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation | |
| Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation | |
| Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety | |
| Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods | |
| Fuel cell technologies Part 2: Fuel cell modules | |
| Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety | |
| Fuel cell technologies Part 3-200: Stationary fuel cell power systems - Performance test methods | |
| Fuel cell technologies Part 3-201: Stationary fuel cell power systems \x97 Performance test methods for small fuel cell power systems | |
| Fuel cell technologies Part 3-2: Stationary fuel cell power systems Performance test methods | |
| Fuel cell technologies Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) \x97 Safety of electrically powered industrial trucks | |
| Fuel cell technologies Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods | |
| Fuel cell technologies Part 6-100: Micro fuel cell power systems - Safety | |
| Fuel cell technologies Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability | |
| Gas-Fired Central Heating Boilers - Specific Requirements for the Domestic Hot Water Operation of Combination Boilers of Nominal Heat Input not Exceeding 70 kw | |
| Grading capacitors for high-voltage alternating current circuit-breakers Part 1: General | |
| Grid connected photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection | |
| Guidance on system dependability specifications | |
| Heat shrinkable moulded shapes - Part 1: Definitions and general requirements | |
| Heat shrinkable moulded shapes Part 2: Methods of test | |
| Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance Sheet 100: Heat-shrinkable moulded shape dimensions | |
| Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system per... | |
| Heat-shrinkable moulded shapes Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance | |
| Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression Type D-16 format | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 1: VTR specifications | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 2: Compression format | |
| Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 3: Data stream format | |
| High availability automation networks | |
| High density recording format on CD-R/RW disc system HD-BURN format | |
| High voltage switchgear and controlgear - Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-current test techniques - Definitions and requirements for test currents and measuring systems | |
| High-voltage switchgear and controlgear - Part 101: Synthetic testing | |
| High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages of 52 kv and above | |
| High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations | |
| High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches | |
| High-voltage switchgear and controlgear - Part 1: Common specifications | |
| High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear - Part 202: High voltage/low voltage prefabricated substation | |
| High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations... | |
| High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above | |
| High-voltage switchgear and controlgear Part 100: Alternating current circuit-breakers | |
| High-voltage switchgear and controlgear Part 100: High-voltage alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear Part 101: Synthetic testing | |
| High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear Part 103: Switches for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 106: Alternating current contactors, contactor-based controllers and motor-starters | |
| High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above | |
| High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches | |
| High-voltage switchgear and controlgear Part 110: Inductive load switching | |
| High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines | |
| High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 204: Rigid gas-insulated transmission lines for rated voltage above 52kV | |
| High-voltage switchgear and controlgear Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) | |
| High-voltage switchgear and controlgear Part 3: Digital interfaces based on IEC 61850 | |
| High-voltage switchgear and controlgear Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures | |
| Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V | |
| Household electrical appliances - Measurement of standby power | |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices \x96 Human models, instrumentation, and procedures Part 2: Procedure to determine the specific absorption rate (SAR) for... | |
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held... | |
| Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices - Human models, instrumentation, and procedures Part 2: Procedure to determine the specific absorption rate (SAR) for... | |
| Hydraulic machines \x97 Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines | |
| Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement | |
| Hydroelectric power plant automation Guide for computor-based control | |
| ID format for 50 mm magneto-optical disc system | |
| Inductive components Reliability management | |
| Industrial communication networks - High availability automation networks - Part 4: Cross-network Redundancy Protocol (CRP) | |
| Industrial communication networks - High availability automation networks Part 1: General concepts and calculation methods | |
| Industrial communication networks - High availability automation networks Part 2: Media Redundancy Protocol (MRP) | |
| Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR) | |
| Industrial communication networks - High availability automation networks Part 4: Cross-network Redundancy Protocol (CRP) | |
| Industrial communication networks - High availability automation networks Part 5: Beacon Redundancy Protocol (BRP) | |
| Industrial communication networks - High availability automation networks Part 6: Distributed Redundancy Protocol (DRP) | |
| Industrial communication networks - High availability automation networks Part 7: Ring-based Redundancy Protocol (RRP) | |
| Industrial systems, installations and equipment and industrial products - Labelling of cables and cores | |
| Insulators - Glossary of terms and definitions | |
| Integrated circuits - Measurement of electromagnetic immunity - Part 8: Measurement of radiated immunity - IC stripline method | |
| Integrated circuits \x97 EMC evaluation of transceivers Part 2: LIN transceivers | |
| Integrated circuits \x97 Measurement of impulse immunity Part 3: Non-synchronous transient injection method | |
| Internet protocol (IP) and transport stream (TS) based service access | |
| Live working - Insulating ropes | |
| Live working Insulating hoses with fittings for use with hydraulic tools and equipment | |
| Live working Telescopic sticks and telescopic measuring sticks | |
| Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters | |
| Magnetic resonance equipment for medical imaging Part 2: Classification criteria for pulse sequences | |
| Managing risk in projects \x97 Application guidelines | |
| Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results... | |
| Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test... | |
| Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) Part 1: Carrier-sense time division multiple access (CSTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems \x97 Automatic identification system (AIS) Part 3: Repeater stations \x97 Minimum operational and performance requirements \x97 Methods of test and required test results... | |
| Maritime navigation and radiocommunication equipment and systems \x97 Class B shipborne equipment of the automatic identification system (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems Class B shipborne equipment of the automatic identification system (AIS) Part 1: Carrier-sense time division multiple access (CSTDMA) techniques | |
| Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS Chaper V Performance requirements, methods of test and required test results | |
| Material declaration for products of and for the electrotechnical industry | |
| Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure | |
| Medical device software - Software life-cycle processes | |
| Medical device software Software life-cycle processes | |
| Medical devices - Application of usability engineering to medical devices | |
| Medical devices Part 1: Application of usability engineering to medical devices | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging | |
| Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography | |
| Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment | |
| Medical electrical equipment \x97 Characteristics of digital x-ray imaging devices Part 1-1: Determination of the detective quantum efficiency \x97 Detectors used in radiographic imaging | |
| Medical electrical equipment \x97 Dosimetric instruments as used in brachytherapy Part 1: Instruments based on well-type ionization chambers | |
| Medical electrical equipment Characteristics of digital X-ray imaging devices Part 1: Determination of the detective quantum efficiency | |
| Medical electrical equipment Safety of radiotherapy record and verify systems | |
| Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and... | |
| Metallic communication cables test methods Part 1-1: Electrical Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) | |
| Metallic communication cables test methods Part 4-2: Electromagnetic compatibility (EMC) Screening and coupling attenuation Injection clamp method | |
| Metallic communication cables test methods Part 4\x967: Electromagnetic compatibility (EMC) Test method for measuring the transfer impedance and the screening or the coupling attenuation Tube in tube method | |
| Method of evaluating the thermal performance of enclosures | |
| Methods of measurement for DVD players | |
| Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital television transmitters | |
| Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric Seals | |
| Multimedia home network - Network interfaces for network adapter | |
| Multimedia home networks - Home network communication protocol over IP for multimedia household appliances | |
| Multimedia home server systems - Digital rights permission code | |
| Multimedia home server systems - Interchangeable volume/file structure adaptation for broadcasting receivers - Part 2: General recording structure | |
| Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 1: General description and architecture | |
| Multimedia systems - Common communication protocol for inter-connectivity on heterogeneous networks | |
| Multimedia systems and equipment - Multimedia E-publishing and E-books - Generic format for E-publishing | |
| Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties | |
| Noise suppression sheet for digital devices and equipment Part 2: Measuring methods | |
| Noise suppression sheet for digital devices and equipment Part 3: Characterization of parameters of noise suppression sheet | |
| Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions | |
| Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF) | |
| Nuclear power plants - Main control room - Alarm functions and presentation | |
| Obsolescence management - Application guide | |
| Optical circuit boards - Basic test and measurement procedures Part 2-4: Optical transmission test for optical circuit boards without input/output fibres | |
| Optical circuit boards - Basic test and measurement procedures Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards | |
| Optical circuit boards - Part 1: General | |
| Optical circuit boards - Performance standard Part 3-1: Flexible optical circuit boards using unconnectorized optical glass fibres | |
| Optical circuit boards Part 2-1: Measurements - Optical attenuation and isolation | |
| Optical circuit boards Part 2-2: Measurements - Dimensions of optical circuit boards | |
| Optical circuit boards Part 3: Performance standards - General and guidance | |
| Optical circuit boards Part 4: Interface standards - General and guidance | |
| Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications | |
| Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods | |
| Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance testing methods | |
| Organic Light Emitting Diode (OLED) displays Part 5-3: Measuring methods of image sticking and lifetime | |
| Organic light emitting diode (OLED) displays Part 6-1: Measuring methods of optical and electro-optical parameters | |
| Organic light emitting diode (OLED) displays Part 6-2: Measuring methods of visual quality and ambient performance | |
| Organic light emitting diode (OLED) displays Part 6-3: Measuring methods of image quality | |
| Organic light emitting diode displays - Part 1-2: Terminology and letter symbols | |
| Overhead electrical conductors Formed wire, concentric lay, stranded conductors | |
| Photobiological safety of lamps and lamp systems \x97 Part 5: Image projectors | |
| Photobiological safety of lamps and lamp systems | |
| Photovoltaic (PV) systems \x97 Requirements for testing, documentation and maintenance Part 1: Grid connected systems \x97 Documentation, commissioning tests and inspection | |
| Photovoltaic pumping systems - Design qualification and performance measurements | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets \x97 Conductive charging of electric vehicles Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers | |
| Plugs, socket-outlets, vehicle couplers and vehicle inlets Conductive charging of electric vehicles Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. | |
| Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V General definitions, test methods and acceptance criteria | |
| Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application | |
| Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification | |
| Power line communication systems for power utility applications Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids | |
| Power line communication systems for power utility applications Part 2: Analogue power line carrier terminals or APLC | |
| Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP | |
| Power systems management and associated information exchange - Data and communications security Part 3: Communication network and system security - Profiles including TCP/IP | |
| Power systems management and associated information exchange - Data and communications security Part 7: Network and System Management (NSM) data object models | |
| Power systems management and associated information exchange - Interoperability in the long term Part 100: CIM profiles to XML schema mapping | |
| Power systems management and associated information exchange \x97 Data and communications security Part 11: Security for XML documents | |
| Power systems management and associated information exchange \x97 Data and communications security Part 9: Cyber security key management for power system equipment | |
| Power systems management and associated information exchange \x97 Interoperability in the long term Part 2: End to end quality codes for supervisory control and data acquisition (SCADA) | |
| Printed Boards Part 1: Generic Specification | |
| Printed boards Part 20: Printed circuit boards for high-brightness LEDs | |
| Printed Boards Part 4: Rigid Multilayer Printed Boards with Interlayer Connections - Sectional Specification Section 1: Capability Detail Specification - Performance Levels A, B and C | |
| Printed Boards Part 4: Rigid Multilayer Printed Boards with Interlayer Connections - Sectional Specification | |
| Protection against lightning - Part 4: Electrical and electronic systems within structures | |
| Protection against lightning Part 1: General principles | |
| Protection against lightning Part 2: Risk management | |
| Protection against lightning Part 3: Physical damage to structures and life hazard | |
| Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation | |
| Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders | |
| Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring Part 1: General characteristics and performance requirements | |
| Radiation protection instrumentation - Portable photon contamination meters and monitors | |
| Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material | |
| Radiation protection instrumentation \x97 Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation | |
| Railway applications - Automated urban guided transport (AUGT) - Safety requirements | |
| Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts | |
| Railway applications - Urban guided transport management and command/control systems Part 2: Functional requirements specification | |
| Reed contact units - Part 2: Heavy-duty reed switches | |
| Reed Contacts Unit- Part 1: Generic Specification | |
| Reed switches Part 1-1: Generic specification \x96 Quality assessment | |
| Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods | |
| Reliability growth - Stress testing for early failures in unique complex systems | |
| Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools | |
| Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation | |
| Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Safety requirements for power electronic converter systems and equipment - Part 1: General | |
| Safety requirements for power electronic converter systems and equipment Part 1: General | |
| Safety requirements for secondary batteries and battery installations Part 3: Traction batteries | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x97 Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part... | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single cells with partial gas recombination | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications | |
| Semiconductor devices - Constant current electromigration test | |
| Semiconductor devices - Hot carrier test on MOS transistors | |
| Semiconductor devices - Metallization stress void test | |
| Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) | |
| Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films | |
| Semiconductor devices Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers | |
| Semiconductor die products - Part 2: Exchange data formats | |
| Semiconductor die products Part 1: Requirements for procurement and use | |
| Semiconductor die products Part 5: Requirements for information concerning electrical simulation | |
| Semiconductor die products Part 6: Requirements for information concerning thermal simulation | |
| Service diagnostic interface for consumer electronics products and networks \x97 Implementation for echonet | |
| Service diagnostic interface for consumer electronics products and networks Implementation for IEEE 1394 | |
| Single crystal wafers for surface acoustic wave (SAW) device applications Specifications and measuring methods | |
| Solid-state relays | |
| Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters | |
| Sound system equipment - Electroacoustic transducers - Measurement of suspension parts | |
| Specification for Dedicated LPG Appliances - Room Sealed LPG Space Heating Equipment for Installation in Vehicles and Boats | |
| Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements | |
| Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements | |
| Static Transfer Systems (STS) Part 1: General and safety requirements | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test | |
| Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test | |
| Television METADATA - Part 1: Metadata dictionary structure | |
| Television METADATA - Part 2: Data encoding protocol using key-length-value | |
| Teleweb application - Part 1: General description | |
| Teleweb application - Part 2: Delivery methods | |
| Teleweb application - Part 3: Superteletext profile | |
| TeleWeb application Part 4: Hyperteletext profile | |
| Temperature - Electromotive force (EMF) tables for pureelement thermocouple combinations | |
| Tracked Changes (Redline) - Assessment of lighting equipment related to human exposure to electromagnetic field | |
| Tracked changes (Redline) - Digital addressable lighting interface Part 201: Particular requirements for control gear \x97 Fluorescent lamps (device type 0) | |
| Tracked Changes (Redline) - Dynamic modules - General and guidance | |
| Tracked Changes (Redline) - Enterprise-control system integration Part 3: Activity models of manufacturing operations management | |
| Tracked Changes (Redline) - Fibreboards \x96 Specifications Part 4: Requirements for softboards | |
| Tracked Changes (Redline) - Field device tool (FDT) interface specification Part 302: Communication profile integration - IEC 61784 CPF 2 | |
| Tracked Changes (Redline) - Fuel cell technologies Part 3-201: Stationary fuel cell power systems \x96 Performance test methods for small fuel cell power systems | |
| Tracked Changes (Redline) - Fuel cell technologies Part 6-200: Micro fuel cell power systems \x97 Performance test methods | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear Part 104: Alternating current switches for rated voltages higher than 52 kV | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear Part 1: Common specifications for alternating current switchgear and controlgear | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear Part 3: Digital interfaces based on IEC 61850 | |
| Tracked Changes (Redline) - Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems \x97 Class B shipborne equipment of the automatic identification system (AIS) Part 2: Self-organising time division multiple access (SOTDMA)... | |
| Tracked Changes (Redline) - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Part 1: Devices... | |
| Tracked Changes (Redline) - Medical electrical equipment \x97 Characteristics of digital x-ray imaging devices Part 1-1: Determination of the detective quantum efficiency \x97 Detectors used in radiographic imaging | |
| Tracked Changes (Redline) - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements | |
| Tracked Changes (Redline) - Plugs, socket-outlets, vehicle connectors and vehicle inlets \x97 Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories... | |
| Tracked Changes (Redline) - Resistance welding equipment Part 2: Electromagnetic compatibility (EMC) requirements | |
| Tracked Changes (Redline) - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use... | |
| Triggering messages for broadcast applications Part 1: Format | |
| Triggering messages for broadcast applications Part 2: Transport methods | |
| Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses | |
| Ultrasonics \x96 Field characterization \x96 Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields | |
| Ultrasonics Field characterization Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields | |
| Video recording 12,65 mm Type D-11 format Part 1: Tape recording | |
| Video recording 12,65 mm type D-11 format Part 2: Picture compression and data stream | |
| Video recording 12,65 mm type D-11 format Part 3: Data mapping over SDTI | |
| Video recording Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression Format D-10 | |
| Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval Analogue interface | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (H VDC) power transmission - Electrical testing |
| << Prev | Next >> |