Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
330
340
350
360
370
380
384
385
386
387
388
389
390
391
392
393
394
395
396
400
410
420
430
440
450
500
550
600
650
700
750
1000
1500
1620
| Product Name | Notes |
|---|---|
| 3D Display devices Part 12-1: Measuring methods for stereoscopic displays using glasses - Optical | |
| 3D display devices Part 12-2: Measuring methods for stereoscopic displays using glasses \x96 Motion blur | |
| 3D display devices Part 13-1: Visual inspection methods for stereoscopic displays using glasses \x96 Ghost image | |
| 3D Display Devices Part 62-11: Measurement methods for transparent virtual-image type \x97 Optical | |
| 3D displays Part 52-1: Fundamental measurement methods of aerial display - Optical | |
| 3D displays Part 62-12: Measurement methods for virtual-image type - Image quality | |
| Active assisted living (AAL) reference architecture and architecture model Part 1: Reference architecture | |
| Active assisted living (AAL) reference architecture and architecture model Part 2: Architecture model | |
| Active assisted living (AAL) system development guidance for AAL service providers | |
| Active assisted living (AAL) use case standards inventory and mapping | |
| Active millimetre-wave systems for security screening of humans - General requirements | |
| Alpine skis - Binding mounting area - Requirements for test screws | |
| Aluminium alloy castings - Visual method for assessing porosity | |
| Anodizing of aluminium and its alloys - Specification for hard anodic oxidation coatings on aluminium and its alloys | |
| Assembly Tools for Screws and Nuts - Double-Headed Open-Ended Engineers Wrenches - Length of Wrenches and Thickness of the Heads | |
| Assembly Tools for Screws and Nuts - Double-Headed, Deep Offset and Modified Offset, Box Wrenches - Length of Wrenches and Thickness of the Heads | |
| Assembly Tools for Screws and Nuts - Double-Headed, Flat and Offset, Box Wrenches - Length of Wrenches and Thickness of the Heads | |
| Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz)... | |
| Audio Archive System Part 1-1: DVD disk and data migration for long-term audio data storage | |
| Audio archive system Part 1-2: BD disk and data migration for long-term audio data storage | |
| Banking - Procedures for message encipherment (wholesale) - Part 1: General principles | |
| Banking - Procedures for message encipherment (wholesale) - Part 2: DEA algorithm | |
| Banking and related financial services - Information interchange - Documentary credit form | |
| Binary power generation systems Part 3-1: Safety requirements - System with less than 500 kW in capacity | |
| Binary power generation systems with capacity less than 100 kW \x96 Performance test methods | |
| BSI ROOT Thesaurus | |
| Bushings for DC application | |
| Carbon Fibre - Determination of Density | |
| Carbonaceous materials for the production of aluminium \x97 Calcined coke for electrodes \x97 Determination of the electrical resistivity of granules | |
| Classification of dense shaped refractory products - Part 4: Special products | |
| Classification of dense shaped refractory products Part 1: Alumina-silica | |
| Classification of dense shaped refractory products Part 2: Basic products containing less than 7 % residual carbon | |
| Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon | |
| Coal - Methods for evaluating flocculants for use in coal preparation Part 2: Flocculants as filter aids in rotary vacuum filtration systems | |
| Coal \x97 Methods for evaluating flocculants for use in coal preparation Part 1: Basic parameters | |
| Coke - Determination of true relative density, apparent relative density and porosity | |
| Coke \x97 Determination of bulk density in a large container | |
| Coke Part 1: Determination of apparent relative density | |
| Coke Part 2: Determination of true relative density | |
| Conceptual model of standardization for multimedia car systems and equipment | |
| Connectors for DC-application in photovoltaic systems \x97 Safety requirements and tests | |
| Connectors for electrical and electronic equipment Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100... | |
| Connectors for electrical and electronic equipment Part 2: Detail specification for 2-way, shielded or unshielded, free and fixed connectors: mechanical mating information, pin assignment and additional requirements for type 2... | |
| Connectors for electrical and electronic equipment Part 4: Detail specification for shielded or unshielded, free and fixed connectors with up to 8 ways for balanced single-pair data transmission with current... | |
| Connectors for electrical and electronic equipment Part 7: Detail specification for up to 7 ways including PE or FE (data/power) and shield pin, free and fixed circular connectors for balanced... | |
| Connectors for electronic equipment Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with current carrying... | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 1: General | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 2-1: Media formats | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 2-2: HTTP adaptive streaming | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 3: Content metadata | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 4-1: Protocols | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 4-2: Examples of IPTV protocol sequences | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 5-2: Web standards TV profile | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 6: Procedural application environment | |
| Consumer terminal function for access to IPTV and open internet multimedia services Part 7: Authentication, content protection and service protection | |
| Consumer terminal function for access to IPTV and open multimedia services Part 5-1: Declarative application environment | |
| Consumer terminal function for access to IPTV and open multimedia services Part 8: Profiles | |
| Cork stoppers \x97 Determination of global migration | |
| Cosmetics - Analytical methods - Nitrosamines: Detection and determination of N-nitrosodiethanolam ine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization | |
| Criteria for accident monitoring instrumentation for nuclear power generating stations | |
| Cylindrical Machined Carbon Electrodes - Nominal Dimensions | |
| Definition of extended SGAM smart energy grid reference architecture model | |
| Dense shaped refractory products - Determination of cold compressive strength Part 1: Referee test without packing | |
| Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing | |
| Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding | |
| Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communication devices, 30 MHz to 6 GHz Part 4: General requirements for using the finite element... | |
| Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz Part 1: General requirements for using the finite-difference time-domain... | |
| Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz Part 2: Specific requirements for finite difference time domain... | |
| Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz Part 3: Specific requirements for using the finite difference... | |
| Digital video interface - Gigabit video interface for multimedia systems | |
| Display lighting unit Part 2-3: Electro-optical measuring methods for LED frontlight unit | |
| Display lighting unit Part 2-4: Electro-optical measuring methods of laser module | |
| Display lighting unit Part 2-5: Measurement method for optical quantities of non-planar light sources | |
| Distribution Automation Using Distribution Line Carrier Systems - Part 5-2: Lower Layer Profiles - Frequency Shift Keying (FSK) Profile | |
| Durability test methods for electronic displays Part 2-21: Environmental tests - Test methods for heat and humidity | |
| Durability test methods for electronic displays Part 2-23: Environmental tests - Outdoor weathering | |
| Durability test methods for electronic displays Part 3-2: Mechanical tests - Static stress | |
| Dynamic characteristics of inverter-based resources in bulk power systems Part 1: Interconnecting inverter-based resources to low short circuit ratio AC networks | |
| E-Transporters Part 1: Terminology and classification | |
| Economic evaluation of active assisted living services Part 1: Framework | |
| Economic evaluation of active assisted living services Part 2: Example of use \x97 Monitoring patients with chronic diseases | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 3-15: Particular requirements for transportable magnetic drills | |
| Electric motor-operated tools - Dust measurement procedure Part 2-11: Particular requirements for hand-held reciprocating saws | |
| Electric motor-operated tools - Dust measurement procedure Part 2-14: Particular requirements for hand-held planers | |
| Electric motor-operated tools - Dust measurement procedure Part 2-19: Particular requirements for hand-held jointers | |
| Electric motor-operated tools - Dust measurement procedure Part 2-1: Particular requirements for hand-held core drills | |
| Electric motor-operated tools - Dust measurement procedure Part 2-22: Particular requirements for hand-held cut-off machines and wall chasers | |
| Electric motor-operated tools - Dust measurement procedure Part 2-3: Particular requirements for hand-held concrete grinders and disc-type sanders | |
| Electric motor-operated tools - Dust measurement procedure Part 2-4: Particular requirements for hand-held sander | |
| Electric motor-operated tools - Dust measurement procedure Part 2-5: Particular requirements for hand-held circular saws | |
| Electric motor-operated tools - Dust measurement procedure Part 2-6: Particular requirements for hand-held hammers | |
| Electric motor-operated tools - Dust measurement procedure Part 3-3: Particular requirements for transportable planers and thicknessers | |
| Electric motor-operated tools - Dust measurement procedure Part 3-9: Particular requirements for transportable mitre saws | |
| Electric motor-operated tools \x97 Dust measurement procedure Part 2-17: Particular requirements for hand-held routers and trimmers | |
| Electric motor-operated tools \x97 Dust measurement procedure Part 3-1: Particular requirements for transportable table saws | |
| Electronic displays Part 2-11: Measurement of optical characteristics \x97 Local luminance and uniformity | |
| Electronic displays Part 2-1: Measurements of optical characteristics \x97 Fundamental measurements | |
| Electronic displays Part 2-2: Measurements of optical characteristics - Ambient performance | |
| Electronic displays Part 2-7 : Measurements of optical characteristics - Tiled displays | |
| Electronic displays Part 2-8: Measurements of optical characteristics - Reflective displays | |
| Electronic displays Part 3-4: Evaluation of optical performances - High dynamic range displays | |
| Electronic displays Part 3-5: Evaluation of optical performance \x97 Colour capabilities | |
| Electronic displays Part 3-6: Evaluation of optical performance - Spatial resolution | |
| Electronic displays Part 3-7: Evaluation of optical performance - Tone characteristics | |
| Electronic displays Part 3-9: Evaluation of optical performance - Display sparkle contrast | |
| Electronic paper display Part 2: Essential ratings and characteristics | |
| Electronic paper display Part 3-1: Optical measuring methods | |
| Electronic paper display Part 3-2: Measuring method \x97 Electro-optical | |
| Electronic paper displays \x96 Part 3-3: Optical measuring methods for displays with integrated lighting units | |
| Electronic paper displays Part 1-1: Terminology | |
| Electronic paper displays Part 4-2: Environmental test methods | |
| Electrostatic discharge sensitivity testing - Transmission line pulse (TLP) - Component level | |
| Energy and data interfaces of users connected to the smart grid with other smart grid stakeholders \x97 Standardization landscape | |
| Essential oil of tarragon (Artemisia dracunculus L.) | |
| Eyewear display Part 1-2: Generic \x97 Terminology | |
| Eyewear display Part 10: Specifications | |
| Eyewear display Part 20-10: Fundamental measurement methods \x97 Optical properties | |
| Eyewear display Part 20-20: Fundamental measurement methods - Image quality | |
| Eyewear display Part 21-20: Specific measurement methods for VR image quality \x97 Screen door effect | |
| Eyewear display Part 22-10: Specific measurement methods for AR type \x96 Optical properties | |
| Eyewear display Part 22-20: Specific measurement methods for AR type - Image quality | |
| Fire Hazard Testing - Part 8-2: Heat Release - Summary and Relevance of Test Methods | |
| Fire Hazard Testing - Part 9-2: Surface Spread of Flame - Summary and Relevance of Test Methods | |
| Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV | |
| Flexible display devices Part 1-1: Terminology and letter symbols | |
| Flexible display devices Part 2: Essential ratings and characteristics | |
| Flexible display devices Part 5-1: Measuring methods of optical performance | |
| Flexible display devices Part 5-3: Visual assessment of image quality and defects | |
| Flexible display devices Part 6-1: Mechanical stress test methods | |
| Flexible display devices Part 6-22: Crease and waviness measurement methods | |
| Flexible display devices Part 6-2: Environmental testing methods | |
| Flexible display devices Part 6-3: Mechanical test methods \x97 Impact and hardness tests | |
| Flexible displays devices Part 6-23: Mechanical test methods \x97 Mechanical misaligned folding test method | |
| Format for LSI-Package-Board interoperable design | |
| Functional performance criteria for AAL robots used in connected home environment | |
| Future Flight Systems - Vocabulary | |
| General guidance on reuse and repurposing of secondary cells and batteries | |
| General method for assessing the proportion of reused components in products | |
| Generic smart grid requirements Part 1: Specific application of the Use Case methodology for defining generic smart grid requirements according to the IEC systems approach | |
| Generic smart grid requirements Part 2-1: Grid related domains | |
| Generic smart grid requirements Part 2-2: Market related domain | |
| Generic smart grid requirements Part 2-3: Resources connected to the grid domains | |
| Generic smart grid requirements Part 2-4: Electric transportation related domain | |
| Guide for incorporating human reliability analysis into probabilistic risk assessments for nuclear power generating stations and other nuclear facilities | |
| Guidelines for measuring the threshold voltage (VT) of SiC MOSFETs | |
| Guidelines for the selection of quality management system consultants and use of their services | |
| Health software Part 1: General requirements for product safety | |
| High voltage direct current (HVDC) power transmission \x96 Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications \x96 Test methods and requirements... | |
| High-voltage switchgear and controlgear Part 37-013: Alternating-current generator circuit-breakers | |
| High-voltage switchgear and controlgear Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers | |
| Household appliances network and grid connectivity Part 1: General requirements, generic data modelling and neutral messages | |
| Household appliances network and grid connectivity Part 3-1: Specific Data Model Mapping: SPINE and SPINE-IoT | |
| Hybrid communication cables Part 3-10: Outdoor hybrid cables - Family specification for FTTA hybrid communication cables | |
| Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria | |
| Hybrid telecommunication cables Part 3: Outdoor hybrid cables - Sectional specification | |
| Hydraulic Fluid Power - Cylinders - Acceptance Tests | |
| Industrial communication networks - Fieldbus specifications - WIA-PA communication network and communication profile | |
| Industrial non-destructive testing equipment - Electron linear accelerator | |
| Information processing - Magnetic ink character recognition Part 1: Print specifications for E13B | |
| Information processing - Magnetic ink character recognition Part 2: Print specifications for CMC7 | |
| Innovation - Table of Relevant Standards Using standards to drive innovation: a table of relevant standards which can help your organisation achieve its goals | |
| Innovation Solution Pack - Checklist for Generating a Short-List of Potential Partners | |
| Innovation Solution Pack \x96 Checklist for leaders | |
| Integrated circuits \x96 Three dimensional integrated circuits Part 1: Terminology | |
| Integrated circuits \x96 Three dimensional integrated circuits Part 2: Alignment of stacked dies having fine pitch interconnect | |
| Integrated circuits \x96 Three dimensional integrated circuits Part 3: Model and measurement conditions of through-silicon via | |
| Intelligent device management Part 1: Concepts and terminology | |
| Internal Combustion Compression-Ignition Engines - Measurement Apparatus for Smoke from Engines Operating under Steady-State Conditions - Filter Type Smokemeter | |
| Junction boxes for photovoltaic modules \x97 Safety requirements and tests | |
| Laser display devices Part 1-2: Vocabulary and letter symbols | |
| Laser display devices Part 5-2: Optical measuring methods of speckle contrast | |
| Laser display devices Part 5-3: Measuring methods of image quality for laser projection display | |
| Laser display devices Part 5-4: Optical measuring methods of colour speckle | |
| Laser displays Part 5-1: Measurement of optical performance for laser front projection | |
| Laser displays Part 5-5: Optical measuring methods of raster-scanning retina direct projection laser displays | |
| Laser displays Part 5-6: Measuring methods for optical performance of projection screens | |
| Laser displays Part 5-7: Measuring methods of image quality affected by speckle for scanning laser displays | |
| Laser displays Part 6-1: Visualization method of colour gamut intersection | |
| Lithium-ion batteries and charging systems \x97 Safety | |
| Live working - Care, maintenance and in-service testing of aerial devices with insulating booms | |
| Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) | |
| Magnetic powder cores \x97 Guidelines on dimensions and the limits of surface irregularities Part 6: EQ-cores | |
| Maritime navigation and radiocommunication equipment and systems - Data interface Part 2: Secure online transfer of S-100 based products applied on S-421 Route Plan | |
| Maximum power point tracking efficiency of grid connected photovoltaic inverters | |
| Measurement method for the output of electroshock weapons | |
| Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulator in wireless communication and broadcasting systems | |
| Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Part 1528: Human models, instrumentation, and procedures... | |
| Measurement procedures for materials used in photovoltaic modules Part 7-3: Accelerated stress tests - Methods of abrasion of PV module external surfaces | |
| Measuring relays and protection equipment Part 118-1: Synchrophasor for power systems - Measurements | |
| Mechanical Vibration - Measurement and Analysis of Whole-Body Vibration to Which Passengers and Crew Are Exposed in Railway Vehicles | |
| Mechanical vibration and shock - Mechanical impedance of the human hand-arm system at the driving point | |
| Medical electrical equipment Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment | |
| Metallic materials Sheet and strip Determination of plastic strain ratio | |
| Microprocessor system bus (VMSbus) - Serial sub-system bus of the IEC 821 bus (VMEbus) | |
| Microprocessor system BUS I, 8-bit and 16-bit data - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors | |
| Microprocessor systembus - 8-bit and 16-bit Data (MULTIBUS I) - Part 1: Functional description with electrical and timing specifications | |
| Microprocessor systembus - 8-bit and 16-bit data (MULTIBUS I) - Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) | |
| Multimedia home network configuration \x97 Basic reference model Part 1: System model | |
| Multimedia home network configuration \x97 Basic reference model Part 2: Operational model | |
| Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries | |
| Multimedia systems and equipment - Multimedia signal transmission - Dependable line code with error correction | |
| Nanomanufacturing \x97 Key control characteristics Part 3-1: Luminescent nanomaterials \x97 Quantum efficiency | |
| Natural esters - Guidelines for maintenance and use in electrical equipment | |
| Nuclear facilities - Electrical power systems - AC interruptible power supply systems | |
| Nuclear facilities - Electrical power systems - Diesel generator units applied as standby power sources | |
| Nuclear facilities - Human factors engineering - Application to the design of human-machine interfaces | |
| Nuclear facilities \x96 Electrical equipment important to safety \x96 Qualification | |
| Nuclear facilities \x97 Equipment important to safety \x97 Seismic qualification | |
| Nuclear facilities \x97 Human machine interfaces \x97 Operator support systems | |
| Nuclear facilities \x97 Instrumentation important to safety \x97 Spent fuel pool instrumentation | |
| Nuclear instrumentation \x97 Data format for list mode digital data acquisition used in radiation detection and measurement | |
| Nuclear power plants - Control rooms - Computer based procedures | |
| Nuclear Power Plants - Electrical power systems - Coordination and interaction with electric grid | |
| Nuclear Power Plants - Instrumentation and Control Important to Safety - Electrical Equipment Condition Monitoring Methods Part 1: General | |
| Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods Part 2: Indenter modulus | |
| Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods Part 3: Elongation at break | |
| Nuclear Power Plants - Instrumentation and Control Important to Safety - Electrical Equipment Condition Monitoring Methods Part 4: Oxidation Induction Techniques | |
| Nuclear power plants - Instrumentation and control important to safety - Selection and use of industrial digital devices of limited functionality | |
| Nuclear power plants - Instrumentation and control systems important to safety - Criteria for seismic trip system | |
| Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices | |
| Nuclear power plants - Instrumentation important to safety - Thermocouples: characteristics and test methods | |
| Nuclear power plants - Instrumentation systems important to safety - Pressure transmitters: Characteristics and test methods | |
| Nuclear power plants ? Instrumentation and control important to safety ? Electrical equipment condition monitoring methods Part 6: Insulation resistance | |
| Nuclear power plants \x96 Instrumentation and control important to safety \x96 Electrical equipment condition monitoring methods Part 2: Indenter modulus | |
| Nuclear power plants \x96 Instrumentation and control systems \x96 Requirements for coordinating safety and cybersecurity | |
| Nuclear power plants \x96 Instrumentation, control and electrical power systems \x96 Cybersecurity requirements | |
| Nuclear power plants \x97 Control rooms \x97 Requirements for emergency response facilities | |
| Nuclear power plants \x97 Electrical power system \x97 General requirements | |
| Nuclear power plants \x97 Electrical power systems \x97 Electrical power systems analysis | |
| Nuclear power plants \x97 Instrumentation and control important to safety \x97 Electrical equipment condition monitoring methods Part 5: Optical time domain reflectometry | |
| Nuclear power plants \x97 Instrumentation and control important to safety \x97 Radiation monitoring systems (RMS): Characteristics and lifecycle | |
| Nuclear power plants \x97 Instrumentation and control systems \x97 Requirements for coordinating safety and cybersecurity | |
| Nuclear power plants \x97 Instrumentation and control systems important to safety \x97 Design and qualification of isolation devices | |
| Nuclear power plants \x97 Instrumentation systems important to safety \x97 Characteristics and test methods of nuclear reactor reactivity meters | |
| Nuclear power plants \x97 Instrumentation, control and electrical power systems \x97 Security controls | |
| Nuclear power plants. Use of probabilistic safety asessment for the classification of instrumentation and control functions | |
| Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters Part 1: Pressure transmitters | |
| Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters Part 2: Temperature sensors | |
| Optics and Optical Instruments - Environmental Requirements - Part 11: Optical Instruments for Outdoor Conditions of Use | |
| Optics and Optical Instruments - Environmental Requirements - Part 12: Conditions of transport for optical instruments | |
| Optics and optical instruments - Environmental requirements - Part 1: General information, definitions, climatic zones and their parameters | |
| Optics and Optical Instruments - Environmental Requirements - Part 4: Test Requirements for Telescopic Systems | |
| Optics and optical instruments - Environmental requirements - Part 6: Test requirements for medical optical devices | |
| Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring instruments | |
| Optics and optical instruments - Environmental requirements - Part 8: Test requirements for extreme conditions of use | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 10: Table Representing Data of a Lens Element | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 11: Non-Toleranced Data | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 12: Aspheric Surfaces | |
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 13: Laser irradiation damage threshold | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 1: General | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 2: Material Imperfections - Stress Birefringence | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 3: Material Imperfections - Bubbles and Inclusions | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 4: Material Imperfections - Inhomogeneity and Striae | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 5: Surface Form Tolerances | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 6: Centring Tolerances | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 7: Surface Imperfections Tolerances | |
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 8: Surface texture | |
| Optics and Optical Instruments - Preparation of Drawings for Optical Elements and Systems - Part 9: Surface Treatment and Coating | |
| Optics and optical instruments Preparation of drawings for optical elements and systems Part 14: Wavefront deformation tolerance | |
| Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces | |
| Optics and photonics - Preparation of drawings for optical elements and systems Part 16: Diffractive surfaces | |
| Optics and photonics \x97 Guidance for the selection of environmental tests | |
| Optics and photonics \x97 Preparation of drawings for optical elements and systems Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae | |
| Optics and photonics \x97 Preparation of drawings for optical elements and systems Part 19: General description of surfaces and components | |
| Optics and photonics Preparation of drawings for optical elements and systems Part 17: Laser irradiation damage threshold | |
| Overview of the Innovation Solution Pack What\x92s in this pack, and how to access video content | |
| Photography - Films in sheets and rolls for general use - Dimensions | |
| Photography - Paper dimensions - Pictorial sheets | |
| Photography - Paper dimensions - Rolls for printers | |
| Photography \x97135-size film and magazine - Specifications | |
| Photovoltaic inverters \x97 Data sheet and name plate | |
| Photovoltaics in buildings Part 2: Requirements for building-integrated photovoltaic systems | |
| Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions | |
| Plastics - Fire tests - Standard ignition sources | |
| Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) Part 1: General requirements | |
| Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-SYSTEMS) Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships | |
| Pneumatic Fluid Power - Cylinders - Final Examination and Acceptance Criteria | |
| Pneumatic fluid power - Electro-pneumatic continuous flow control valves Part 1: Main characteristics to include in the supplier's literature | |
| Pneumatic fluid power - Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature | |
| Pneumatic fluid power - Electro-pneumatic pressure control valves Part 1: Main characteristics to include in the supplier's literature | |
| Pneumatic fluid power - Electro-pneumatic pressure control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature | |
| Power Modeling to Enable System Level Analysis | |
| Power transformers Part 57-1202: Liquid immersed phase-shifting transformers | |
| Printed electronics Part 101: Terminology \x96 Vocabulary | |
| Printed electronics Part 201-2: Materials \x97 Substrates \x97 Measurement methods for properties of stretchable substrates | |
| Printed electronics Part 201: Materials - Substrates | |
| Printed electronics Part 201: Materials \x97 Substrates | |
| Printed electronics Part 202-10: Materials - Resistance measurement method for thermoformable conducting layer | |
| Printed electronics Part 202-11: Materials - Conductive ink - Measurement method of electrical resistance uniformity for large area printed conductive layer | |
| Printed electronics Part 202-3: Materials \x97 Conductive ink \x97 Measurement of sheet resistance of conductive films \x97 Contactless method | |
| Printed electronics Part 202-4: Materials \x97 Conductive ink \x97 Measurement methods for properties of stretchable printed layers (conductive and insulating) | |
| Printed electronics Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an insulating substrate | |
| Printed electronics Part 202-6: Materials \x97 Conductive ink \x97 Measurement method for resistance changes under high temperature and humidity \x97 Printed conductive layer on a flexible substrate | |
| Printed electronics Part 202-7: Materials \x97 Printed film \x97 Measurement of peel strength for printed layer on flexible substrate by the 90\xb0 peel method | |
| Printed electronics Part 202-8: Materials - Conductive ink - Measurement of difference in resistance of printing direction of conductive film fabricated with wire-shaped materials | |
| Printed electronics Part 202-9: Materials - Conductive ink - Printed patterns for mechanical test | |
| Printed electronics Part 202: Materials \x97 Conductive ink | |
| Printed electronics Part 203-2: Materials - Semiconductor ink - Space charge limited mobility measurement in printed organic semiconductive layers | |
| Printed electronics Part 203: Materials \x97 Semiconductor ink | |
| Printed electronics Part 204: Materials - Insulator ink - Measurement methods of properties of insulator inks and printed insulating layers | |
| Printed electronics Part 301-1: Equipment \x96 Contact printing \x96 Rigid master \x96 Measurement method of plate master external dimension | |
| Printed electronics Part 301-2: Equipment - Contact printing - Rigid master - Measurement method of plate master pattern dimension | |
| Printed Electronics Part 301-3: Equipment - Contact printing - Rigid master - Measurement method of roll master shape errors of printing plate rollers | |
| Printed electronics Part 302-1: Equipment - Inkjet - Imaging based measurement of jetting speed | |
| Printed electronics Part 302-2: Equipment - Inkjet - Imaging-based measurement of droplet volume | |
| Printed electronics Part 302-3: Equipment - Inkjet - Imaging-based measurement of drop direction | |
| Printed electronics Part 302-4: Equipment - Inkjet - Medium for inkjet printing dot placement evaluation | |
| Printed electronics Part 302-6: Equipment - Inkjet - First drop measurement | |
| Printed electronics Part 303-1: Equipment - Roll-to-roll printing - Mechanical dimensions | |
| Printed electronics Part 401: Printability \x97 Overview | |
| Printed electronics Part 402-1: Printability \x97 Measurement of qualities \x97 Pattern width | |
| Printed electronics Part 402-2: Printability \x97 Measurement of qualities \x97 Edge waviness | |
| Printed electronics Part 402-3: Printability \x97 Measurement of qualities \x97 Voids in printed pattern using a two-dimensional optical image | |
| Printed electronics Part 403-1: Printability - Requirements for reproducibility - Basic patterns for evaluation of printing machine | |
| Printed electronics Part 501-1: Quality assessment \x96 Failure modes and mechanical testing \x96 Flexible or bendable primary or secondary cells | |
| Printed electronics Part 502-1: Quality assessment \x97 Organic light emitting diode (OLED) elements \x97 Mechanical stress testing of OLED elements formed on flexible substrates | |
| Printed electronics Part 502-2: Quality assessment - Organic light emitting diode (OLED) elements - Combined mechanical and environmental stress test methods for flexible OLED elements | |
| Printed electronics Part 503-1: Quality assessment \x97 Test method of displacement current measurement for printed thin-film transistor | |
| Printed electronics Part 503-3: Quality assessment - Measuring method of contact resistance for the printed thin film transistor - Transfer length method | |
| Printed electronics Part 505: Quality assessment - Flexible gas sensor - Mechanical and thermal testing | |
| Protection against lightning \x97 Thunderstorm warning systems | |
| Quality Assurance for Measuring Equipment Part 2: Guidelines for Control of Measurement Processes | |
| Quality management - Customer satisfaction - Guidelines for business-to-consumer electronic commerce transactions | |
| Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations | |
| Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations | |
| Quality management - Customer satisfaction - Guidelines for monitoring and measuring | |
| Quality management - Guidance on statistical techniques for ISO 9001:2015 | |
| Quality management - Guidance to understand, evaluate and improve organizational quality culture | |
| Quality Management - Guidelines for Configuration Management | |
| Quality Management - Guidelines for Quality Plans | |
| Quality management - Guidelines for training | |
| Quality management - Guidelines on people involvement and competence | |
| Quality management - Guidelines to quality in project management | |
| Quality management \x97 Guidance for quality tools and their application | |
| Quality management Customer satisfaction Guidelines for complaints handling in organizations | |
| Quality management Guidelines for realizing financial and economic benefits | |
| Quality management systems - Guidance for documented information | |
| Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems | |
| Radiation protection instrumentation - Semiempirical method for performance evaluation of detection and radionuclide identification Part 1: Performance evaluation of the instruments, featuring radionuclide identification in static mode | |
| Radiation protection instrumentation - X-ray computed tomography (CT) inspection systems of bottled/canned liquids | |
| Radiation protection instrumentation \x96 System of spectral identification of liquids in transparent and semitransparent containers (Raman systems) | |
| Radiation protection instrumentation \x97 Environmental, electromagnetic and mechanical performance requirements | |
| Radiation protection instrumentation \x97 Security screening of humans \x97 Measuring the imaging performance of X-ray systems | |
| Radiation protection instrumentation. Data format for radiation instruments used in the detection of illicit trafficking of radioactive materials | |
| Railway applications - Energy measruement on boardtrains Part 6: Requirements for purposes other than billing | |
| Railway applications - Fixed installations - Electric traction - Copper and copper alloy catenary wires for overhead contact line systems | |
| Reinforcement materials - Tubular braided sleeves - Basis for a specification | |
| Residual current operated circuit-breakers for household and similar use Part 1: Outline of blocks and modules for residual current device standards | |
| Residual current operated circuit-breakers for household and similar use Part 2: Residual current devices (RCDs) \x97 Vocabulary | |
| Residual current operated circuit-breakers for household and similar use Part 3-1: Particular requirements for RCDs with screwless-type terminals for external copper conductors | |
| Residual current operated circuit-breakers for household and similar use Part 3-2: Particular requirements for RCDs with flat quick-connect terminations | |
| Residual current operated circuit-breakers for household and similar use Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use... | |
| Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles | |
| Rotating Electrical Machines - Part 18-34: Functional Evalution of Insulation Systems - Test Procedures for Form-Wound Windings - Evaluation of Thermomechnical Endurance of Insulation Systems | |
| Safety of laser products - Part 5: Manufacturer\x92s checklist for IEC 60825-1 | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion | |
| Semiconductor devices - Classification of defects in gallium nitride epitaxial film on silicon carbide substrate | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 2: Evaluation method for electron mobility, sub-threshold swing, and threshold voltage of flexible device | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 3: Evaluation of thin film transistor characteristics on flexible substrates under bulging | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 4: Fatigue evaluation for flexible conductive thin film on the substrate for flexible semiconductor devices | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 5: Test method for thermal characteristics of flexible materials | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 7: Test method for characterizing the barrier performance of thin film encapsulation for flexible organic semiconductor | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 8: Test method for stretchability, flexibility, and stability of flexible resistive memory | |
| Semiconductor devices - Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment Part 1: Arbitrary and random mechanical vibrations | |
| Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices Part 1: Classification of defects | |
| Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices Part 3: Test method for defects using photoluminescence | |
| Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices Part 4: Procedure for identifying and evaluating defects using a combined method of optical... | |
| Semiconductor devices - Reliability test method by inductive load switching for gallium nitride transistors | |
| Semiconductor devices - Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors Part 1: Test method for bias temperature instability | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation Part 2: Thermo power based thermoelectric energy harvesting | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation Part 4: Test and evaluation methods for flexible piezoelectric energy harvesting devices | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation Part 6: Test and evaluation methods for vertical contact mode triboelectric energy harvesting devices | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation Part 7: Linear sliding mode triboelectric energy harvesting | |
| Semiconductor devices - Semiconductor devices for energy harvesting and generation Part 8: Test and evaluation methods of flexible and stretchable supercapacitors for use in low power electronics | |
| Semiconductor devices - Semiconductor interface for human body communication Part 4: Capsule endoscope | |
| Semiconductor devices \x96 Flexible and stretchable semiconductor devices Part 1: Bending test method for conductive thin films on flexible substrates | |
| Semiconductor devices \x96 Flexible and stretchable semiconductor devices Part 6: Test method for sheet resistance of flexible conducting films | |
| Semiconductor devices \x96 Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices Part 2: Test method for defects using optical inspection | |
| Semiconductor devices \x96 Semiconductor devices for energy harvesting and generation Part 1: Vibration based piezoelectric energy harvesting | |
| Semiconductor devices \x96 Semiconductor devices for energy harvesting and generation Part 3: Vibration based electromagnetic energy harvesting | |
| Semiconductor devices \x97 Semiconductor devices for energy harvesting and generation Part 5: Test method for measuring generated power from flexible thermoelectric devices | |
| Semiconductor devices \x97 Stress migration test standard Part 1: Copper stress migration test standard | |
| SI units and recommendations for the use of their multiples and of certain other units | |
| Smart cities - City service continuity Part 2: Implementation guideline and city service cases | |
| Smart cities \x96 City service continuity against disasters \x96 The role of the electrical supply | |
| Smart cities reference architecture methodology | |
| Smart city standards inventory and mapping Part 1: Methodology | |
| Smart city standards inventory and mapping Part 2: Standards inventory | |
| Smart city system \x97 Methodology for concepts building | |
| Smart city use case collection and analysis - City information modelling Part 1: High-level analysis | |
| Smart city use case collection and analysis - City information modelling Part 2: Use case analysis | |
| Smart city use case collection and analysis - Smart urban planning for smart cities Part 1: High-level analysis | |
| Software-Hardware Interface for Multi-Many-Core | |
| Solar thermal electric plants Part 1-6: Silicone-based heat transfer fluids for use in line-focus concentrated solar power applications | |
| Solar thermal electric plants Part 3-1: Systems and components - General requirements for the design of parabolic-trough solar thermal power plants | |
| Solar thermal electric plants Part 4-1: General requirements for the design of solar power tower plants | |
| Solar thermal electric plants Part 5-2: Systems and components - General requirements and test methods for large-size linear Fresnel collectors | |
| Spices - Ginger (Zingiber officinale Roscoe) - Specification | |
| Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment | |
| Standard for receiver fixture interface | |
| Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505 TM | |
| Station Service Voltage Transformers (SSVT) | |
| Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 60 kV (Um = 72,5 kV) \x96 Test methods... | |
| Subsea equipment Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV) | |
| Subsea equipment Part 2: Power transformers | |
| Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV - Test methods and requirements | |
| Systems interface between customer energy management system and the power management system Part 10-1: Open Automated Demand Response | |
| TAP-changers Part 2: Application guidelines | |
| Technical drawings Simplified representation of moulded, cast and forged parts | |
| Technical guidelines for smart hydroelectric power plant | |
| Test methods for the characterization of organic transistor-based ring oscillators | |
| Test methods for the characterization of organic transistors and materials | |
| Thermal standardization on semiconductor packages Part 2-1: 3D thermal simulation models of semiconductor packages for steady-state analysis - Discrete packages | |
| Tools for moulding - Sprue bushes - Dimensions | |
| Tools for moulding - Support pillars | |
| Tools for Pressing - Ball-Lock Punches - Part 1: Ball-Lock Punches for Light Duty | |
| Tools for pressing - Ball-lock punches - Part 2: Ball-lock punches for heavy duty | |
| Tools for pressing - Elastomer pressure springs Part 1: General specification | |
| Tools for pressing - Elastomer pressure springs Part 2: Specification of accessories | |
| Top priority standards development status in the domain of smart energy | |
| Touch and interactive displays Part 1-2: Generic \x96 Terminology and letter symbols | |
| Touch and interactive displays Part 12-10: Measurement methods of touch displays - Touch and electrical performance | |
| Touch and interactive displays Part 12-20: Measurement methods of touch displays - Multi-touch perform | |
| Touch and interactive displays Part 13-10: Reliability test methods of touch displays - Environmental durability test methods | |
| Touch and interactive displays Part 22-10: Measuring methods of fingerprint recognition performance - Under-display optical imaging fingerprint sensing | |
| Touch and interactive displays Part 42-10: Measurement methods of motion-tracking image-control response time for interactive projection display | |
| Tracked Changes (Redline) - Active assisted living (AAL) reference architecture and architecture model \x97 Part 1: Reference architecture | |
| Tracked Changes (Redline) - Anodizing of aluminium and its alloys - Specification for hard anodic oxidation coatings on aluminium and its alloys | |
| Tracked Changes (Redline) - Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Outside dimensions | |
| Tracked Changes (Redline) - Assembly tools for screws and nuts - Doubled-headed box wrenches, flat and offset - Outside dimensions and test torques | |
| Tracked Changes (Redline) - Audio archive system \x97 Part 1-2: BD disk and data migration for long-term audio data storage | |
| Tracked Changes (Redline) - Cork stoppers \x97 Determination of global migration | |
| Tracked Changes (Redline) - Digital video interface - gigabit video interface for multimedia systems | |
| Tracked Changes (Redline) - Generic smart grid requirements - Part 1: Specific application of the use case methodology for defining generic smart grid requirements according to the IEC systems approach... | |
| Tracked Changes (Redline) - Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance... | |
| Tracked Changes (Redline) - Intelligent device management \x97 Part 1: Concepts and terminology | |
| Tracked Changes (Redline) - Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) | |
| Tracked Changes (Redline) - Multimedia home network configuration - Basic reference model - Part 1: System model | |
| Tracked Changes (Redline) - Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries | |
| Tracked Changes (Redline) - Nuclear facilities \x97 Instrumentation and control important to safety \x97 Radiation monitoring systems (RMS): Characteristics and lifecycle | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 4: Oxidation induction techniques | |
| Tracked Changes (Redline) - Nuclear power plants \x97 Instrumentation and control important to safety \x97 Electrical equipment condition monitoring methods \x97 Part 2: Indenter measurements | |
| Tracked Changes (Redline) - Optics and photonics - Preparation of drawings for optical elements and systems Part 11: Non-toleranced data | |
| Tracked Changes (Redline) - Optics and photonics - Preparation of drawings for optical elements and systems Part 5: Surface form tolerances | |
| Tracked Changes (Redline) - Optics and photonics - Preparation of drawings for optical elements and systems Part 6: Centring tolerances | |
| Tracked Changes (Redline) - Optics and photonics - Preparation of drawings for optical elements and systems Part 7: Surface imperfections | |
| Tracked Changes (Redline) - Optics and photonics - Preparation of drawings for optical elements and systems Part 9: Surface treatment and coating | |
| Tracked Changes (Redline) - Optics and photonics \x97 Guidance for the selection of environmental tests | |
| Tracked Changes (Redline) - Optics and photonics \x97 Preparation of drawings for optical elements and systems Part 14: Wavefront deformation tolerance | |
| Tracked Changes (Redline) - Photography - Unprocessed photographic papers - Sheet dimensions | |
| Tracked Changes (Redline) - Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1: Main characteristics to include in the supplier's literature | |
| Tracked Changes (Redline) - Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 2: Test methods to determine main characteristics to include in the supplier's literature | |
| Tracked Changes (Redline) - Printed electronics - Part 202: Materials - Conductive ink | |
| Tracked Changes (Redline) - Printed electronics \x97 Part 203: Materials \x97 Semiconductor ink | |
| Tracked Changes (Redline) - Printed electronics \x97 Part 401: Printability \x97 Overview | |
| Tracked Changes (Redline) - Printed electronics \x97 Part 402-1: Printability \x97 Measurement of qualities \x97 Line pattern widths | |
| Tracked Changes (Redline) - Quality management - Customer satisfaction - Guidance for business-to-consumer electronic commerce transactions | |
| Tracked Changes (Redline) - Quality management - Customer satisfaction - Guidelines for monitoring and measuring | |
| Tracked Changes (Redline) - Quality management - Guidance for people engagement | |
| Tracked Changes (Redline) - Quality management - Guidelines for configuration management | |
| Tracked Changes (Redline) - Quality management - Guidelines for quality management in projects | |
| Tracked Changes (Redline) - Quality management \x97 Customer satisfaction \x97 Guidelines for codes of conduct for organizations | |
| Tracked Changes (Redline) - Quality management \x97 Customer satisfaction \x97 Guidelines for complaints handling in organizations | |
| Tracked Changes (Redline) - Quality management \x97 Customer satisfaction \x97 Guidelines for dispute resolution external to organizations | |
| Tracked Changes (Redline) - Quality management \x97 Guidance on statistical techniques for ISO 9001:2015 | |
| Tracked Changes (Redline) - Quality management \x97 Guidelines for quality plans | |
| Tracked Changes (Redline) - Quality management systems - Managing an organization for quality results - Guidance for realizing financial and economic benefits | |
| Tracked Changes (Redline) - Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems | |
| Tracked Changes (Redline) - Residual current operated circuit-breakers for household and similar use \x97 Part 3-3: Specific requirements for devices with screw-type terminals for external untreated aluminium conductors and with... | |
| Tracked Changes (Redline) - Spices and condiments \x97 Whole/pieces and ground dried ginger (Zingiber officinale Roscoe) \x97 Specification | |
| Tracked Changes (Redline) - Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance | |
| Tracked Changes (Redline) - Twinax cables for digital communications - Part 1: Generic specification | |
| Tracked Changes (Redline) - Utility connections in port Part 1: High voltage shore connection (HVSC) systems - General requirements | |
| Tracking systems for radioactive materials \x97 Requirements | |
| Transmitting and receiving equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio-over-fibre systems Part 2: Measurement method of common-mode rejection ratio of optical coherent detection device... | |
| Transmitting and receiving equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio-over-fibre systems Part 3: Measurement method of non-linear response of optical-to-electric converter | |
| Transmitting and receiving equipment for radiocommunication - Radio-over-fibre technologies and their performance standard Part 4: Radio-over-fibre-bas ed indoor distributed antenna system (DAS) for 5G | |
| Twinax cables for digital communications Part 1-1: Time domain test methods for twinax cables for digital communications - General requirements | |
| Twinax cables for digital communications Part 1-2: Time domain test method for twinax cables for digital communications \x97 Impedance | |
| Twinax cables for digital communications Part 1: Generic specification | |
| Twinax cables for digital communications Part 2: Family specification \x97 Cable for Ethernet-over-twinax physical interfaces | |
| Use case methodology Part 4: Best practices in use case development for IEC standardization processes and some examples for application outside standardization | |
| Using standards to make your organization more innovative A guide to using the resources in this solution pack to improve innovation in your organization | |
| Utility connections in port Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements | |
| Utility connections in port Part 2: High and low voltage shore connection systems - Data communication for monitoring and control | |
| Video surveillance systems for use in security applications Part 4: Application guidelines | |
| Workplace atmospheres Part 1: Gas detectors \x97 Performance requirements of detectors for toxic gases |
| << Prev | Next >> |