Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
100
150
200
250
300
350
380
390
400
410
420
430
434
435
436
437
438
439
440
441
442
443
444
445
446
450
460
470
480
490
500
550
600
650
700
750
800
1000
1500
1620
| Product Name | Notes |
|---|---|
| Aluminium-clad steel wires for electrical purposes | |
| American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) | |
| American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services | |
| American National Standard for Electromagnetic Compatibility\x97 Radiated Emission Measurements in Electromagnetic Interference (EMI) Control\x97Calibrati on and Qualification of Antennas (9 kHz to 40 GHz) Corrigendum 1 | |
| American National Standard for Evaluation of Wireless Coexistence | |
| American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radio-Frequency Equipment | |
| American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment | |
| American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site... | |
| American National Standard for Methods of Measurement of Radio-Frequency Emissions from Lighting Devices | |
| American National Standard for Methods of Measurement of Radio-Frequency Emissions from Wireless Power Transfer Equipment | |
| American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronics Equipment in the Range of 9 kHz to 40 GHz-Specifications | |
| American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1 | |
| American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts | |
| American National Standard for Testing Unlicensed Wireless Devices | |
| American National Standard for Validation Methods for Radiated Emission Test Sites, 30 MHz to 1 GHz | |
| American National Standard Guide for Automated Electromagnetic Interference Measurements | |
| American National Standard Guide for Electromagnetic Compatibility-Comput ations and Treatment of Measurement Uncertainty | |
| American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment | |
| American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices Corrigendum 1 | |
| American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment | |
| American National Standard Validation Methods for Radiated Emission Test Sites, 1 GHz to 18 GHz | |
| American National Standard\x97 Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems | |
| Apolipoprotein Immunoassays: Development and Recommended Performance Characteristics; Approved Guideline | |
| Application Guide for Surge Protection of Electric Generating Plants | |
| Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports-Overview | |
| Assessment of Fetal Lung Maturity by the Lamellar Body Count; Approved Guideline | |
| ASTM ELEARNING: C617 Standard Practice for Capping Cylindrical Concrete Specimens: SINGLE-USER LICENSE | |
| Blood Alcohol Testing in the Clinical Laboratory; Approved Guideline | |
| Cement\x96Mortar Lining of Water Pipelines In Place | |
| CHEMICAL ANALYSIS OF MAGNESITE AND DOLOMITE | |
| Complex Variables | |
| CROSSTIES AND SWITCH TIES - PRESERVATIVE TREATMENT BY PRESSURE PROCESSES | |
| Cured-In-Place Pipe (CIPP) Rehabilitation of Pressurized Potable Water Pipelines, 4 In. (100 mm) and Larger | |
| CYLINDER SERVICE LIFE SEAMLESS STEEL HIGH PRESSURE CYLINDERS | |
| Definition of the Term Sand | |
| DISINFECTING WATER MAINS | |
| Disinfection for Water Treatment Plants | |
| Disinfection of Water-Storage Facilities | |
| Disinfection of Wells | |
| Electric Power Connectors for Use in Overhead Line Conductors | |
| Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current = 16 A per... | |
| Electromagnetic compatibility (EMC) \x97 Part 3-11: Limits \x97 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems \x97 Equipment with rated current = 75 A and... | |
| Electromagnetic compatibility (EMC) \x97 Part 3-11: Limits \x97 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems \x97 Equipment with rated current =75 A and subject... | |
| Electromagnetic compatibility (EMC) \x97 Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems | |
| Electromagnetic compatibility (EMC) \x97 Part 3-3: Limits \x97 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current = 16 A per... | |
| Electromagnetic compatibility (EMC) \x97 Part 4-13: Testing and measurement techniques \x97 Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | |
| Electromagnetic compatibility (EMC) \x97 Part 4-1: Testing and measurement techniques \x97 Overview of the IEC 61000-4 series | |
| Energy Performance Standard for Commercial Refrigerated Display Cabinets and Merchandisers | |
| Energy performance standard for commercial refrigeration equipment | |
| Energy Performance Standard for Refrigerated Display Cabinets (Merchandisers) | |
| Errata to American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1 | |
| Errata to Guide for the Application of Neutral Grounding in Electrical Utility Systems-Part I: Introduction | |
| Errata to IEEE Guide for Surge Protectors and Surge Protective Circuits Used in Information and Communication Technology Circuits (ICT), Including Smart Grid\x97Part 1 Applications | |
| Errata to IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater | |
| Errata to IEEE Standard Test Specification for Thyristor Diode Surge Protective Devices | |
| Explosive atmospheres \x97 Part 13: Equipment protection by pressurized room \x93p\x94 and artificially ventilated room \x93v\x94 | |
| Explosive atmospheres \x97 Part 30-2: Electrical resistance trace heating \x97 Application guide for design, installation and maintenance | |
| Field Dechlorination | |
| Fluorescent lamp ballast efficacy measurements | |
| Gas Tube Surge Arresters on Wire Line Telephone Circuits | |
| Grooved and Shouldered Type Joints | |
| Guide for Application of Neutral Grounding in Electrical Utility Systems, Part VI-Systems Supplied by Current-Regulated Sources | |
| Guide for Application of Power Apparatus Bushings | |
| GUIDE FOR CONSTRUCTION OF OPEN AREA TEST SITES FOR PERFORMING RADIATED EMISSION MEASUREMENTS | |
| Guide for Installation and Maintenance of Liquid-Immersed Power Transformers Amendment 1: Cold Start of Power Transformers filled with Natural Ester Liquids | |
| Guide for Installation of Liquid-Immersed Power Transformers (Revision of ASA C57.93-1958) | |
| Guide for Loading Dry-Type and Oil-Immersed Current-Limiting Reactors Appendix to American Standard Requirements, Terminology, and Test Code for Current-Limiting Reactors, C57.16-1958 | |
| GUIDE FOR LOADING DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS APPENDIX TO AMERICAN NATIONAL STANDARD POWER AND DISTRIBUTION TRANSFORMERS | |
| GUIDE FOR LOADING MINERAL-OIL-IMMERSED OVERHEAD AND PAD-MOUNTED DISTRIBUTION TRANSFORMERS RATED 500 KVA AND LESS WITH 65 DEGREES C OR 55 DEGREES C AVERAGE WINDING RISE (R 1991) | |
| Guide for loading mineral-oil-immersed power transformers up to and including 100 MVA with 55 degrees C or 65 degrees C winding rise | |
| Guide for Loading Mineral-Oil-Immersed Transformers | |
| GUIDE FOR LOADING OIL-IMMERSED STEP-VOLTAGE AND INDUCTION-VOLTAGE REGULATORS (APPENDIX TO C57.15) | |
| Guide for Surge Protection of DC Power Feeds to Remote Radio Heads Corrigendum 1 | |
| Guide for Surge Protection of DC Power Feeds to Remote Radio Heads | |
| Guide for Surge Protection of Electric Vehicle Infrastructure | |
| Guide for Surge Protectors and Protective Circuits Used in Information and Communications Technology Circuits, Including Smart Grid Data Networks-Overview | |
| Guide for Surge Protectors and Surge Protective Circuits Used in Information and Communication Technology Circuits (ICT), Including Smart Grid\x97Part 1 Applications | |
| Guide for Surge Protectors and Surge Protective Circuits Used in Information and Communications Technology (ICT), Including Smart Grid\x97Part 1 Applications Amendment 1 | |
| Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems | |
| Guide for the Application of Gas Tube and Air Gap Arrester Low-Voltage (Equal to or Less Than 1000 Vrms or 1200 Vdc) Surge-Protective Devices | |
| Guide for the Application of Insulation Coordination | |
| Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems Amendment 1: Supplement to Consider Energy Handling Capabilities | |
| Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems Part I - Introduction | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems Part II-Grounding of Synchronous Generator Systems | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems Part IIGrounding of Synchronous Generator Systems | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III - Generator Auxiliary Systems | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV - Distribution | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V - Transmission Systems and Subtransmission Systems | |
| Guide for the Application of Neutral Grounding in Electrical Utility Systems | |
| Guide for the Application of Surge Protective Components in Surge Protective Devices and Equipment Ports-Part 3: Silicon PN-Junction | |
| Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less Than 1000 Vrms or 1200 Vdc) Data, Communications, and Signaling Circuits | |
| Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater Corrigendum 1: Correct Table 2, A.1, and A.2 | |
| Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater | |
| Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports-Part 1: Gas Discharge Tubes (GDTs) | |
| Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports\x97Part 4: Thermally Activated Current Limiters | |
| Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports\x97Part 6 High Frequency Signal Isolation Transformers | |
| Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports\x97Part 2: Metal-Oxide Varistors (MOVs) | |
| Guide for the Application of Surge-Protective Devices for Low-Voltage (1000 V or Less) AC Power Circuits | |
| Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits... | |
| Guide for the Application of Thyristor Surge Protective Devices | |
| Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems | |
| Guide for the Reclamation of Mineral Insulating Oil and Criteria for Its Use | |
| Guide for the Selection of Neutral-Grounding Devices for High-Voltage Direct Current (HVDC) Converter Transformers | |
| Guide for Transformer Impulse Tests | |
| Guide on Electrostatic Discharge (ESD): Characterization of the ESD Environment | |
| Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies) | |
| Guide on Interactions Between Power System Disturbances and Surge-Protective Devices | |
| Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power Circuits | |
| Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use | |
| GYPSUM CASTING AND MOLDING PLASTER | |
| Hard-drawn aluminium wire for overhead line conductors | |
| Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V | |
| Hydration of Pitch-Breaking Basic Brick | |
| IEEE Guide for Interactions between Power System Disturbances and Surge-Protective Devices | |
| IEEE Guide for the Application of Low- Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side... | |
| IEEE Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power Circuits | |
| IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits | |
| Installation of Asbestos-Cement Pressure Pipe | |
| Installation of Cast-Iron Water Mains | |
| Installation of electric storage tank and heat pump water heaters for residential use | |
| Installation of Steel Water Pipe\x974 In. (100 mm) and Larger | |
| Instrument transformers \x97 Part 10: Additional requirements for low-power passive current transformers | |
| Instrument transformers \x97 Part 11: Additional requirements for low-power passive voltage transformers | |
| Instrument transformers \x97 Part 1: General requirements | |
| Instrument transformers \x97 Part 2: Additional requirements for current transformers | |
| Instrument transformers \x97 Part 3: Additional requirements for inductive voltage transformers | |
| Instrument transformers \x97 Part 4: Additional requirements for combined transformers | |
| Instrument transformers \x97 Part 5: Additional requirements for capacitor voltage transformers | |
| Instrument transformers \x97 Part 6: Additional general requirements for lowpower instrument transformers | |
| Instrument transformers \x97 Part 9: Digital interface for instrument transformers | |
| Insulation Coordination\x97Defi nitions, Principles, and Rules | |
| Internal Pipe Joint Seal Assemblies for Water Service | |
| Laboratory Support for Pain Management Programs | |
| Liquid Chromatography-Mass Spectrometry Methods; Approved Guideline | |
| Liquid Chromatography-Mass Spectrometry Methods | |
| Method for Determination of the DIH Purity of Nuclear | |
| Method of Test for Apparent Impact Strength of Preformed Block Type Thermal Insulating Materials | |
| Method of Test for Chemical Resistance of Asbestos Fiber Reinforced Thermosetting Resins Used in Self-Supporting Structures | |
| Methods for External Visual Inspection of Natural Gas Vehicle (NGV) Fuel Containers and Their Installations | |
| Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids | |
| Metric Machine Screw and Conical Spring Washer | |
| NORMA PARA LA INSPECCI\xd3N VISUAL DE CILINDROS DE GAS COMPRIMIDO DE ALEACI\xd3N DE ALUMINIO DE ALTA PRESI\xd3N | |
| NORMA PARA LA INSPECCI\xd3N VISUAL DE CILINDROS DE GAS COMPRIMIDO DE ALEACI\xd3N DE ALUMINIO DE BAJA PRESI\xd3N | |
| NORMA PARA LA INSPECCI\xd3N VISUAL DE LOS CILINDROS DE ACERO PARA GAS COMPRIMIDO | |
| NORME CONCERNANT L'INSPECTION VISUELLE ET LA REQUALIFICATION DES BOUTEILLES \xc0 GAZ HAUTE PRESSION RENFORC\xc9ES DE FIBRES | |
| Norme de rendement des climatiseurs et des thermopompes \xe0 deux blocs et monoblocs | |
| NORME POUR L\x92INSPECTION VISUELLE DES BOUTEILLES \xc0 GAZ BASSE PRESSION EN ALLIAGE D\x92ALUMINIUM | |
| NORMES CONCERNANT L\x92INSPECTION VISUELLE DES BOUTEILLES \xc0 GAZ COMPRIM\xc9 HAUTE PRESSION EN ALLIAGE D'ALUMINIUM | |
| Performance Characteristics and Dimensions for High Current Power Transformer Bushings with Rated Continuous Current in Excess of 5000 A in Bus Enclosures | |
| Performance Criteria and Test Methods for Plug-in (Portable) Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120 V/240 V Single Phase Power Service and Metallic Conductive Communication Line(s) | |
| Performance standard for split-system and single-package central air conditioners and heat pumps | |
| Photometric performance of roadway and street lighting luminaires | |
| Photometric performance of roadway lighting luminaires | |
| Pipe Bursting of Potable Water Mains 4 In. (100 mm) to 36 In. (900 mm) | |
| Quantitative Measurement of Proteins and Peptides by Mass Spectrometry | |
| Recommended Practice for an on-Site, Ad Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specific Radio-Frequency Transmitters | |
| Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers | |
| Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits Corrigendum 1: Deletion of Table A.2 and Associated Text | |
| Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits | |
| Recommended Practices for Friction Welding | |
| Requirements, Terminology, and Test Procedure for Neutral Grounding Devices Amendment 1: Neutral Grounding Resistors Clause (AM) | |
| Requirements, Terminology, and Test Procedure for Neutral Grounding Devices | |
| Secondary cells and batteries for renewable energy storage \x97 General requirements and methods of test \x97 Part 1: Photovoltaic off-grid application | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V \x97 Part 1: General | |
| Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V \x97 Part 2: Endurance testing | |
| Specification for Compression Couplings for Vitrified Clay Plain-End Pipe | |
| Specification for Fireclay Brick for Marine Boiler Service | |
| Specification for Friction Welding of Metals | |
| Specification for Steel Drill Screws for the Application of Gypsum Board to Light-Gauge Steel Studs | |
| Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger | |
| STANDARD DESCRIPTIVE NOMENCLATURE OF CONSTITUENTS OF AGGREGATES FOR RADIATION-SHIELDING CONCRETE (R 1990) | |
| STANDARD DESCRIPTIVE NOMENCLATURE OF CONSTITUENTS OF AGGREGATES FOR RADIATION-SHIELDING CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete | |
| Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors | |
| Standard for Electromagnetic Compatibility - Radiated Emission Measurements in Electromagnetic Interference (EMI) Control - Calibration of Antennas | |
| Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications | |
| Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) Amendment 1: Short-Circuit Tests for Station, Intermediate, and Distribution Arresters | |
| Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits | |
| Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices | |
| Standard for Performance of Low-Voltage Surge-Protective Devices (Secondary Arresters) | |
| STANDARD FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS | |
| STANDARD FOR VISUAL INSPECTION OF LOW PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS | |
| Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation | |
| STANDARD GUIDE FOR PROPERTIES AND TESTS OF MASTICS AND COATINGS FOR THERMAL INSULATION (R 1982) | |
| Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD GUIDE TO PROPERTIES AND TESTS OF MASTICS AND COATING FINISHES FOR THERMAL INSULATION | |
| STANDARD METHOD FOR EVALUATING CERAMIC FLOOR TILE INSTALLATION SYSTEMS USING THE ROBINSON-TYPE FLOOR TESTER | |
| STANDARD METHOD FOR MEASUREMENT OF SMALL COLOR DIFFERENCES BETWEEN CERAMIC WALL OR FLOOR TILE | |
| Standard Methods for Chemical Analysis of Chrome-Containing Refractories and Chrome Ore | |
| Standard Methods for Chemical Analysis of Fireclay and High-Alumina Refractories | |
| Standard Methods for Chemical Analysis of Silica Refractories | |
| Standard Methods for Chemical Analysis of Zircon Refractories | |
| STANDARD METHODS FOR ESTIMATING THE THERMAL NEUTRON ABSORPTION CROSS SECTION OF NUCLEAR GRAPHITE | |
| STANDARD METHODS OF MEASUREMENT OF RADIO - NOISE EMISSIONS FROM LOW - VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 10 KHZ TO 1 GHZ | |
| Standard Practice for Capping Cylindrical Concrete Specimens - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR CAPPING CYLINDRICAL CONCRETE SPECIMENS | |
| STANDARD PRACTICE FOR COKING LARGE SHAPES OF CARBON-BEARING MATERIAL | |
| STANDARD PRACTICE FOR DETERMINING CHEMICAL RESISTANCE OF THERMOSETTING RESINS USED IN GLASS-FIBER-REINFORC ED STRUCTURES INTENDED FOR LIQUID SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforc ed Structures Intended for Liquid Service | |
| STANDARD PRACTICE FOR INNER AND OUTER DIAMETERS OF THERMAL INSULATION FOR NOMINAL SIZES OF PIPE AND TUBING - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR INNER AND OUTER DIAMETERS OF THERMAL INSULATION FOR NOMINAL SIZES OF PIPE AND TUBING | |
| STANDARD PRACTICE FOR INSTALLATION OF METAL CEILING SUSPENSION SYSTEMS FOR ACOUSTICAL TILE AND LAY-IN PANELS (R 1981) | |
| Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels | |
| STANDARD PRACTICE FOR REPORTING IRRADIATION RESULTS ON GRAPHITE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR REPORTING IRRADIATION RESULTS ON GRAPHITE | |
| Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling | |
| STANDARD RECOMMENDED PRACTICE ON PROCEDURES FOR CONTROL OF SYSTEM ELECTROMAGNETIC COMPATIBILITY | |
| Standard Requirements, Terminology, and Test Code for Bushings for DC Applications | |
| Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA | |
| STANDARD SPECIFICATION FOR AGGREGATES FOR RADIATION-SHIELDING CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR AGGREGATES FOR RADIATION-SHIELDING CONCRETE | |
| STANDARD SPECIFICATION FOR AGRICULTURAL LIMING MATERIALS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Agricultural Liming Materials | |
| STANDARD SPECIFICATION FOR ASBESTOS-CEMENT NONPRESSURE SMALL- DIAMETER SEWER PIPE | |
| STANDARD SPECIFICATION FOR ASBESTOS-CEMENT PLASTIC-FOAM CORE INSULATING PANELS (R 1983) | |
| STANDARD SPECIFICATION FOR ASBESTOS-CEMENT STORM DRAIN PIPE | |
| STANDARD SPECIFICATION FOR BLENDED HYDRAULIC CEMENTS (AASHTO M240) | |
| Standard Specification for Blended Hydraulic Cements (Metric) | |
| Standard Specification for Blended Hydraulic Cements - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR BLENDED HYDRAULIC CEMENTS | |
| STANDARD SPECIFICATION FOR BONDING COMPOUNDS FOR INTERIOR GYPSUM PLASTERING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Bonding Compounds for Interior Gypsum Plastering | |
| STANDARD SPECIFICATION FOR BONDING COMPOUNDS FOR INTERIOR PLASTERING | |
| STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE) - INCLUDES STANDARD + REDLINE (PDF) | |
|
STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE) -- C62 REV A
STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE) -- C62 REV B
|
STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE) |
| STANDARD SPECIFICATION FOR CHEMICAL-RESISTANT RESIN GROUTS (R 1980) (E1-1980) | |
| Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COAL ASH AND RAW OR CALCINED NATURAL POZZOLAN FOR USE IN CONCRETE | |
| Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete | |
| STANDARD SPECIFICATION FOR CONTACT-MOLDED REINFORCED THERMOSETTING PLASTIC (RTP) LAMINATES FOR CORROSION-RESISTANT EQUIPMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CONTACT-MOLDED REINFORCED THERMOSETTING PLASTIC (RTP) LAMINATES FOR CORROSION-RESISTANT EQUIPMENT | |
| STANDARD SPECIFICATION FOR CORKBOARD AND CORK PIPE THERMAL INSULATION | |
| STANDARD SPECIFICATION FOR FLY ASH AND OTHER POZZOLANS FOR USE WITH LIME FOR SOIL STABILIZATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR FLY ASH AND OTHER POZZOLANS FOR USE WITH LIME FOR SOIL STABILIZATION | |
| STANDARD SPECIFICATION FOR FLY ASH AND RAW OR CALCINED NATURAL POZZOLAN FOR USE AS A MINERAL ADMIXTURE IN PORTLAND CEMENT CONCRETE | |
| STANDARD SPECIFICATION FOR GRANITE DIMENSION STONE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Granite Dimension Stone | |
| STANDARD SPECIFICATION FOR GRANITE DIMENSIONS STONE | |
| STANDARD SPECIFICATION FOR GYPSUM BASE FOR VENEER PLASTERS (R 1988)(E1-1988) | |
| STANDARD SPECIFICATION FOR GYPSUM BASE FOR VENEER PLASTERS | |
| STANDARD SPECIFICATION FOR GYPSUM CASTING PLASTER AND GYPSUM MOLDING PLASTER - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster | |
| STANDARD SPECIFICATION FOR GYPSUM KEENE'S CEMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Gypsum Keene\x92s Cement | |
| STANDARD SPECIFICATION FOR GYPSUM KEENE\xb4S CEMENT (R 1981) | |
| Standard Specification for Gypsum Keene\xb4s Cement | |
| Standard Specification for Gypsum Veneer Plaster - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR GYPSUM VENEER PLASTER | |
| STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE) (E1-1987) | |
| STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE) - INCLUDES STANDARD + REDLINE (PDF) | |
|
STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE) -- C652 REV B
STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE) -- C652 REV C
|
STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE) |
| STANDARD SPECIFICATION FOR IMPERVIOUS GRAPHITE PIPE AND THREADING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Impervious Graphite Pipe and Threading | |
| STANDARD SPECIFICATION FOR MANUFACTURE, PERFORMANCE, AND TESTING OF METAL SUSPENSION SYSTEMS FOR ACOUSTICAL TILE AND LAY-IN PANEL CEILINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) | |
| STANDARD SPECIFICATION FOR MINERAL FIBER BLOCK AND BOARD THERMAL INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MINERAL FIBER BLOCK AND BOARD THERMAL INSULATION | |
| STANDARD SPECIFICATION FOR MOLDED EXPANDED PERLITE BLOCK AND PIPE THERMAL INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MOLDED EXPANDED PERLITE BLOCK AND PIPE THERMAL INSULATION | |
| STANDARD SPECIFICATION FOR NON-LOAD BEARING (AXIAL) STEEL STUDS, RUNNERS (TRACKS), AND RIGID FURRING CHANNELS FOR SCREW APPLICATION OF GYPSUM BOARD | |
| Standard Specification for Nonstructural Steel Framing Members - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS | |
| STANDARD SPECIFICATION FOR POROUS CONCRETE PIPE (METRIC) (AASHTO NO. M 176) | |
| Standard Specification for Porous Concrete Pipe (Metric) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Porous Concrete Pipe (Metric) | |
| Standard Specification for Porous Concrete Pipe - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Porous Concrete Pipe [Metric] | |
| Standard Specification for Porous Concrete Pipe | |
| STANDARD SPECIFICATION FOR PREFORMED, CELLULAR POLYSTYRENE THERMAL INSULATION | |
| STANDARD SPECIFICATION FOR QUARTZ-BASED DIMENSION STONE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Quartz-Based Dimension Stone | |
| Standard Specification for Quicklime for Structural Purposes - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Quicklime for Structural Purposes | |
| STANDARD SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE (AASHTO NO. M 242-79) (E1-1987) | |
| STANDARD SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE (METRIC) (AASHTO NO. M 242-79) (E1-1987) | |
| Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE (METRIC) | |
| Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe | |
| STANDARD SPECIFICATION FOR RIGID, CELLULAR POLYSTYRENE THERMAL INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR RIGID, CELLULAR POLYSTYRENE THERMAL INSULATION | |
| Standard Specification for S Aggregates for Radiation-Shielding Concrete | |
| STANDARD SPECIFICATION FOR SANDSTONE BUILDING STONE | |
| STANDARD SPECIFICATION FOR SLATE BUILDING STONE (R 1985) | |
| STANDARD SPECIFICATION FOR SLATE DIMENSION STONE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Slate Dimension Stone | |
| STANDARD SPECIFICATION FOR STRUCTURAL INSULATING BOARD, CALCIUM SILICATE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STRUCTURAL INSULATING BOARD, CALCIUM SILICATE | |
| Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings | |
| STANDARD SPECIFICATION FOR THE MANUFACTURE, PERFORMANCE, AND TESTING OF METAL SUSPENSION SYSTEMS FOR ACOUSTICAL TILE AND LAY-INPANEL CEILINGS | |
| STANDARD SPECIFICATION FOR UNFACED PREFORMED RIGID CELLULAR POLYISOCYANURATE THERMAL INSULATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR UNFACED PREFORMED RIGID CELLULAR POLYISOCYANURATE THERMAL INSULATION | |
| STANDARD SPECIFICATION FOR WATER-RESISTANT GYPSUM BACKING BOARD | |
| Standard Specifications for Gypsum Pottery Plaster | |
| Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits | |
| STANDARD TERMINOLOGY RELATING TO BUILDING AND ENVIRONMENTAL ACOUSTICS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TERMINOLOGY RELATING TO BUILDING AND ENVIRONMENTAL ACOUSTICS | |
| Standard Terminology Relating to Environmental Acoustics | |
| STANDARD TEST METHOD FOR ACTION ON SUBSTRATES BY COATINGS, ADHESIVES, AND JOINT SEALANTS USED ON OR WITH THERMAL INSULATIONS | |
| Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ADHESION OR COHESION STRENGTH OF THERMAL SPRAY COATINGS | |
| Standard Test Method for Alkali Resistance of Porcelain Enamels - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ALKALI RESISTANCE OF PORCELAIN ENAMELS | |
| STANDARD TEST METHOD FOR ANNEALING POINT AND STRAIN POINT OF GLASS BY BEAM BENDING (R 1983) (E1-1983) (E2-1985) | |
| Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending | |
| STANDARD TEST METHOD FOR BREAKING STRENGTH OF CERAMIC TILE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Breaking Strength of Ceramic Tile | |
| STANDARD TEST METHOD FOR BRITTLE RING TENSILE STRENGTH OF CHEMICALLY SETTING SILICATE AND SILICA CHEMICAL-RESISTANT MORTARS | |
| Standard Test Method for CHEMICAL RESISTANCE OF THERMOSETTING RESINS USED IN GLASS-FIBER-REINFORC ED STRUCTURES | |
| STANDARD TEST METHOD FOR CONSTITUENT CONTENT OF COMPOSITE PREPREG BY SOXHLET EXTRACTION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction | |
| STANDARD TEST METHOD FOR D-C VOLUME RESISTIVITY OF GLASS | |
| STANDARD TEST METHOD FOR DENSITY, ABSORPTION, AND VOIDS IN HARDENED CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR DENSITY, ABSORPTION, AND VOIDS IN HARDENED CONCRETE | |
| STANDARD TEST METHOD FOR DETERMINATION OF RESISTANCE TO CHEMICAL SUBSTANCES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR DRYING SHRINKAGE OF MORTAR CONTAINING HYDRAULIC CEMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement | |
| STANDARD TEST METHOD FOR DRYING SHRINKAGE OF MORTAR CONTAINING PORTLAND CEMENT | |
| STANDARD TEST METHOD FOR ELECTRICAL RESISTIVITY OF MANUFACTURED CARBON AND GRAPHITE ARTICLES AT ROOM TEMPERATURE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ELECTRICAL RESISTIVITY OF MANUFACTURED CARBON AND GRAPHITE ARTICLES AT ROOM TEMPERATURE | |
| Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester | |
| STANDARD TEST METHOD FOR EXTRUSION RATE AND APPLICATION LIFE OF ELASTOMERIC SEALANTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants | |
| STANDARD TEST METHOD FOR FLEXURAL STRENGTH AND MODULUS OF ELASTICITY OF CHEMICAL-RESISTANT MORTARS, GROUTS, MONOLITHIC SURFACINGS, AND POLYMER CONCRETES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR FLEXURAL STRENGTH AND MODULUS OF ELASTICITY OF CHEMICAL-RESISTANT MORTARS, GROUTS, MONOLITHIC SURFACINGS, AND POLYMER CONCRETES | |
| STANDARD TEST METHOD FOR FLEXURAL STRENGTH OF MANUFACTURED CARBON AND GRAPHITE ARTICLES USING FOUR-POINT LOADING AT ROOM TEMPERATURE- INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature | |
| STANDARD TEST METHOD FOR INDENTATION HARDNESS OF ELASTOMERIC-TYPE SEALANTS BY MEANS OF A DUROMETER - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR INDENTATION HARDNESS OF ELASTOMERIC-TYPE SEALANTS BY MEANS OF A DUROMETER | |
| STANDARD TEST METHOD FOR IRON STAINING MATERIALS IN LIGHTWEIGHT CONCRETE AGGREGATES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates | |
| STANDARD TEST METHOD FOR ISOTHERMAL CORROSION RESISTANCE OF REFRACTORIES TO MOLTEN GLASS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass | |
| Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile | |
| STANDARD TEST METHOD FOR MODULUS OF RUPTURE OF REFRACTORY MATERIALS AT ELEVATED TEMPERATURES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR MODULUS OF RUPTURE OF REFRACTORY MATERIALS AT ELEVATED TEMPERATURES | |
| STANDARD TEST METHOD FOR PERMEABILITY OF REFRACTORIES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR PERMEABILITY OF REFRACTORIES | |
| STANDARD TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD) - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD) | |
| Standard Test Method for Pressure Test on Glass Pipe | |
| Standard Test Method for Pulse Velocity Through Concrete | |
| STANDARD TEST METHOD FOR REBOILING TENDENCY OF SHEET STEEL FOR PORCELAIN ENAMELING (R 1980) (E1-1980) | |
| Standard Test Method for Resistance of Ceramic Tile to Chemical Substances | |
| Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR RHEOLOGICAL (FLOW) PROPERTIES OF ELASTOMERIC SEALANTS | |
| Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products | |
| Standard Test Method for Staining Materials in Lightweight Concrete Aggregates | |
| STANDARD TEST METHOD FOR TRUE SPECIFIC GRAVITY OF REFRACTORY MATERIALS BY GAS-COMPARISON PYCNOMETER - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer | |
| STANDARD TEST METHOD FOR ULTRASONIC PULSE VELOCITY THROUGH CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ULTRASONIC PULSE VELOCITY THROUGH CONCRETE | |
| Standard Test Method for Volume Resistivity of Glass - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR YOUNG'S MODULUS, SHEAR MODULUS, AND POISSON'S RATIO FOR GLASS AND GLASS-CERAMICS BY RESONANCE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Young\x92s Modulus, Shear Modulus, and Poisson\x92s Ratio for Glass and Glass-Ceramics by Resonance | |
| Standard Test Methods for Avalanche Junction Semiconductor Surge-Protective Device Components - Corrigendum 1 | |
| STANDARD TEST METHODS FOR COMPRESSIVE STRENGTH OF CHEMICAL-RESISTANT MORTARS, GROUTS, MONOLITHIC SURFACINGS, AND POLYMER CONCRETES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHODS FOR COMPRESSIVE STRENGTH OF CHEMICAL-RESISTANT MORTARS, GROUTS, MONOLITHIC SURFACINGS, AND POLYMER CONCRETES | |
| STANDARD TEST METHODS FOR SURGE PROTECTORS USED IN LOW-VOLTAGE DATA, COMMUNICATIONS, AND SIGNALING CIRCUITS | |
| Standard Test Specification for Thyristor Diode Surge Protective Devices | |
| Standard Test Specifications for Avalanche Junction Semiconductor Surge-Protective Devices | |
| Standard Test Specifications for Low-Voltage Air Gap Surge-Protective Devices (Excluding Valve and Expulsion Devices) | |
| Standard Test Specifications for Surge-Protective Devices for Low-Voltage AC Power Circuits | |
| Standard Test Specifications for Varistor Surge-Protective Devices | |
| Surge Arresters for AC Power Circuits | |
| Tentative Specification for PROCESS GLASS PIPE AND FITTINGS | |
| Tentative Specifications for Sand for Use in Lime Plaster | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 1: Test requirements | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval \x97 Part 2: Test procedures | |
| Test Method for Change in Acoustical Absorption of Ceiling Materials Due to Repainting | |
| Test Methods and Preferred Values for Self-Restoring Current-Limiter Components Used in Telecommunication Surge Protection | |
| Test Methods and Preferred Values for Silicon PN-Junction Clamping Diodes | |
| Test Specifications for Gas-Tube Surge-Protective Devices | |
| The Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment Amendment 1: Addition of Saturated Core Secondary Winding Parameters | |
| The Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment | |
| Trial-Use Guide for Loading Power Apparatus Bushings | |
| Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water | |
| Wind energy generation systems \x97 Part 1: Design requirements | |
| Wind Turbines \x97 Part 2: Small Wind Turbines | |
| Wind turbines \x97 Part 3: Design requirements for offshore wind turbines |
| << Prev | Next >> |