Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
366
367
368
369
370
371
372
373
374
375
376
377
378
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin | |
| Acoustics - Measurement of Insertion Loss of Ducted Silencers without Flow - Laboratory Survey Method | |
| Acoustics - Measurement of the In Situ Sound Attenuation of a Removable Screen | |
| Acoustics - Measurement of the Influence of Road Surfaces on Traffic Noise - Part 1: Statistical Pass-by Method | |
| Acoustics - Measurements on Silencers In Situ | |
| Acoustics - Procedure for the Comparison of Noise-Emission Data for Machinery and Equipment | |
| Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 1: Planning | |
| Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 3: Sound Propagation and Noise Prediction in Workrooms | |
| Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery Part 1: Noise Control Strategies | |
| Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery Part 2: Noise Control Measures | |
| Acoustics \x97 Measurement of the influence of road surfaces on traffic noise Part 2: The close-proximity method | |
| Acoustics Determination of sound immission from sound sources placed close to the ear Part 1: Technique using a microphone in a real ear (MIRE technique) | |
| Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements | |
| Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code | |
| Agricultural and Forestry Machinery - Portable Hand-Held Combustion Engine Driven Brush Cutters and Grass Trimmers - Safety | |
| Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 1: Machines fitted with an integral combustion engine | |
| Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grasstrimmers Part 2: Machines for use with back-pack power unit | |
| Air quality - Determination of time-averaged mass emissions and emission factors - General approach | |
| Aluminium pigments for paints Part 1: General aluminium pigments | |
| Aluminium pigments for paints Part 2: Vacuum metallized aluminium pigments | |
| Animal and Vegetable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method | |
| Animal and Vegetable Fats and Oils - Determination of Lead Content - Graphite Furnace Atomic Absorption Method | |
| Animal and vegetable fats and oils - Enzymatic determination of total sterols content | |
| Animal feeding stuffs, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry | |
| Binders for Paints and Varnishes - Amino Resins - General Methods of Test | |
| Binders for Paints and Varnishes - Polyisocyanate Resins - General Methods of Test | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements Part 1: Airborne sound insulation between rooms | |
| Building Acoustics - Estimation of Acoustic Performance of Buildings from the Performance of Elements Part 2: Impact Sound Insulation between Rooms | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements Part 4: Transmission of indoor sound to the outside | |
| Building construction - Organization of information about construction works - Part 3: Framework for object-oriented information | |
| Building construction - Organization of information about construction works Part 2: Framework for classification | |
| Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 2: Determination of the design heating and cooling capacity | |
| Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 8: Electrical heating systems | |
| Building environment design - Embedded radiant heating and cooling systems Part 1: Definitions, symbols, and comfort criteria | |
| Building environment design - Embedded radiant heating and cooling systems Part 3: Design and dimensioning | |
| Building environment design - Embedded radiant heating and cooling systems Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) | |
| Building environment design - Embedded radiant heating and cooling systems Part 5: Installation | |
| Building environment design \x97 Design , dimensioning, installation and control of embedded radiant heating and cooling systems Part 5: Installation | |
| Building environment design \x97 Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 1: Definition, symbols, and comfort criteria | |
| Building environment design \x97 Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 3: Design and dimensioning | |
| Building environment design \x97 Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo... | |
| Building environment design \x97 Embedded radiant heating and cooling systems Part 2: Determination of the design heating and cooling capacity | |
| Cardiovascular implants and extracorporeal systems \x97 Vascular device-drug combination products Part 1: General requirements | |
| Cathodic protection of steel in concrete | |
| Chemical analysis of refractory products by XRF Fused cast bead method | |
| Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping... | |
| Clothing to protect against heat and flame - Determination of contact heat transmission through clothing or constituent materials Part 1: Contact heat produced by heating cylinder | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L... | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with... | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only... | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity | |
| Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing | |
| Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens | |
| Corrosion of metals and alloys - Corrosion fatigue testing Part 2: Crack propagation testing using precracked specimens | |
| Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys | |
| Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on \xc8ihal\x92s method) | |
| Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmetic product | |
| Dental Baseplate/Modelling Wax | |
| Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy | |
| Dentistry - Implants - Clinical performance of hand torque instruments | |
| Determination of individual and total sterols contents \x97 Gas chromatographic method Part 1: Animal and vegetable fats and oils | |
| Determination of individual and total sterols contents \x97 Gas chromatographic method Part 2: Olive and olive pomace oils | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application Part 2: Advanced applications | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application Part 3: Applications to unfolding methods... | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application Part 4: Guidelines to applications | |
| Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation \x97 Fundamentals and application Part 1: Elementary applications | |
| Diesel Fuel - Assessment of Lubricity Using the High Frequency Reciprocating Rig (HFRR) - Part 1: Test Method | |
| Electronic fee collection - Compliance check communication for autonomous systems | |
| Electronic fee collection - Information exchange between service provision and toll charging | |
| Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments | |
| Eye and face protection - Sunglasses and related eyewear Part 1: Sunglasses for general use | |
| Eye and face protection \x97 Sunglasses and related eyewear Part 2: Filters for direct observation of the sun | |
| Eye and face protection against intense light sources used on humans and animals for cosmetic and medical applications Part 1: Specification for products | |
| Fans - Efficiency classification for fans Part 4: Driven fans at maximum operating speed | |
| Fans - Efficiency classification for fans | |
| Fans \x97 Efficiency classification for fans Part 5: Jet fans | |
| Fibre ropes \x97 Manila and sisal \x97 3-, 4- and 8-strand ropes | |
| Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics | |
| Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability, Maturation and Shelf Life | |
| Flux Cored Solder Wire - Specification and Test Methods - Part 2: Determination of Flux Content | |
| Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling | |
| Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 1: Yoke Type Connections | |
| Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 2: Threaded Connections | |
| Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 3: Adaptor for 230 Bar Valves | |
| Gas cylinders \x97 Outlet connections for gas cylinder valves for compressed breathable air | |
| Geometric Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters | |
| Geometrical product specifications (GPS) - Cylindricity Part 1: Vocabulary and parameters of cylindrical form | |
| Geometrical product specifications (GPS) - Cylindricity Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Flatness Part 1: Vocabulary and parameters of flatness | |
| Geometrical product specifications (GPS) - Flatness Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Roundness Part 1: Vocabulary and parameters of roundness | |
| Geometrical product specifications (GPS) - Roundness Part 2: Specification operators | |
| Geometrical product specifications (GPS) - Straightness Part 1: Vocabulary and parameters of straightness | |
| Geometrical product specifications (GPS) - Straightness Part 2: Specification operators | |
| Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments | |
| Geotextiles and Geotextile-Related Products - Static Puncture Test (CBR-Test) | |
| Glass in Building - Laminated Glass and Laminated Safety Glass - Part 1: Definitions and Description of Component Parts | |
| Glass in Building - Laminated Glass and Laminated Safety Glass - Part 3: Laminated Glass | |
| Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability | |
| Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing | |
| Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance | |
| Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass | |
| Glass in building. Laminated glass and laminated safety glass. Definitions and description of component parts | |
| Glass packaging - 26 H 126 crown finish - Dimensions | |
| Glass packaging \x97 26 H 180 crown finish \x97 Dimensions | |
| Glass packaging \x97 Standard tolerances for flaconnage | |
| Graphic technology - Safety requirements for graphic technology equipment and systems Part 1: General requirements | |
| Graphic technology - Safety requirements for graphic technology equipment and systems Part 2: Prepress and press equipment and systems | |
| Graphic technology - Safety requirements for graphic technology equipment and systems Part 3: Binding and finishing equipment and systems | |
| Graphic technology \x97 Safety requirements for graphic technology equipment and systems Part 4: Converting equipment and systems | |
| Graphic technology \x97 Safety requirements for graphic technology equipment and systems Part 5: Manually-fed stand-alone platen presses | |
| Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method | |
| Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management | |
| Health informatics \x97 Explicit time-related expressions for healthcare-specific problems | |
| Hexagon socket head cap screws with metric fine pitch thread | |
| Hygrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties | |
| Hygrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated Temperature | |
| Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method | |
| Hygrothermal Performance of Building Materials and Products - Determination of Water Vapour Transmission Properties | |
| Industrial fans - Mechanical safety of fans - Guarding | |
| Integrated optics - Vocabulary - Part 2: Terms used in classification | |
| Integrated optics Vocabulary Part 1: Basic terms and symbols | |
| Iron oxide pigments - Specifications and methods of test | |
| Lactose - Determination of water content - Karl Fischer method | |
| Lasers - Test Methods for Laser Beam Parameters - Beam Positional Stability | |
| Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes Part 1: Tracheal tube shaft | |
| Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes Part 2: Tracheal tube cuffs | |
| Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition | |
| Lasers and Laser-Related Equipment - Test Methods for Laser Beam Parameters - Polarization | |
| Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Part 1: Primary ignition and penetration | |
| Leather - Determination of total content of certain bisphenols | |
| Lubricants, Industrial Oils and Related Products (Class L) - Family H (Hydraulic Systems) - Specifications for Categories HFAE, HFAS, HFB, HFC, HFDR and HFDU | |
| Machinery for forestry - General safety requirements | |
| Machinery for forestry - Portable chainsaw safety requirements and testing Part 2: Chain-saws for tree service | |
| Machinery for Forestry - Portable Chainsaws - Safety Requirements and Testing - Part 2: Chainsaws for Tree Service | |
| Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 1: Units Fitted with Integral Combustion Engine | |
| Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 2: Units for Use with a Back-Pack Power Source | |
| Machinery for forestry \x97 Safety requirements and testing for portable pole mounted powered pruners | |
| Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service | |
| Mechanically deposited coatings of zinc - Specification and test methods | |
| Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities | |
| Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test | |
| Metallic Materials - Determination of Plane-Strain Fracture Toughness | |
| Metallic materials - Sheet and strip - Determination of forming-limit curves Part 1: Measurement and application of forming-limit diagrams in the press shop | |
| Metallic materials - Sheet and strip - Determination of forming-limit curves Part 2: Determination of forming-limit curves in the laboratory | |
| Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples | |
| Methods of Test for Pallet Joints - Part 2: Determination of Withdrawal and Head Pull-Through Resistance of Pallet Nails and Staples | |
| Methods of Test for Pallet Joints - Part 3: Determination of Strength of Pallet Joints | |
| Methods of Test for Pallet Joints Part 1: Determination of Bending Resistance of Pallet Nails, Other Dowel-Type Fasteners and Staples | |
| Methods of Test for Petroleum and Its Products Part 365: Crude Petroleum and Petroleum Products - Determination of Density - Oscillating U-Tube Method | |
| Methods of test for refractory products - Part 1: Determination of dynamic Young\x92s modulus (MOE) by impulse excitation of vibration | |
| Milk - Determination of Fat Content - Gravimetric Method (Reference Method) | |
| Milk and Milk Products - Determination of Alkaline Phosphatase Activity Using a Fluorimetric Method - Part 1: Milk and Milk-Based Drinks | |
| Milk and milk products Determination of alkaline phosphatase activity Part 2: Fluorometric method for cheese | |
| Molecular biomarker analysis - Requirements and guidance for single-laboratory validation of qualitative real-time polymerase chain reaction (PCR) methods | |
| Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis | |
| Natural gas Calculation of compression factor Part 1: Introduction and guidelines | |
| Natural gas Calculation of compression factor Part 3: Calculation using physical properties | |
| Non-destructive testing - Eddy current testing - Vocabulary | |
| Non-destructive testing - Industrial radiographic film Part 1: Classification of film systems for industrial radiography | |
| Non-destructive testing - Industrial radiographic films Part 2: Control of film processing by means of reference values | |
| Non-Destructive Testing - Terminology - Terms Used in Penetrant Testing | |
| Non-destructive testing \x97 Magnetic particle testing \x97 Vocabulary | |
| Nuclear energy \x96 Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets \x96 Inert gas extraction and conductivity detection method | |
| Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method | |
| Nuclear fuel technology \x96 Controlled-potential coulometric assay of plutonium | |
| Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment Part 1: Validation of materials and insulation systems | |
| Oil and gas industries including lower carbon energy \x97 Wet thermal insulation systems for pipelines and subsea equipment Part 2: Qualification processes for production and application procedures | |
| Oil and gas industries including lower carbon energy \x97 Wet thermal insulation systems for pipelines and subsea equipment Part 3: Interfaces between systems, field joint system, field repairs and prefabricated... | |
| Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content | |
| Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography | |
| Ophthalmic Implants - Intraocular Lenses - Part 1: Vocabulary | |
| Ophthalmic Implants - Intraocular Lenses - Part 2: Optical Properties and Test Methods | |
| Ophthalmic Implants - Intraocular Lenses - Part 4: Labellings and Information | |
| Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability | |
| Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses | |
| Ophthalmic implants - Intraocular lenses Part 4: Labelling and information | |
| Ophthalmic implants - Intraocular lenses Part 8: Fundamental requirements | |
| Ophthalmic implants Intraocular lenses Part 10: Phakic intraocular lenses | |
| Ophthalmic implants Intraocular lenses Part 3: Mechanical properties and test methods | |
| Ophthalmic implants Intraocular lenses Part 5: Biocompatibility | |
| Ophthalmic implants Intraocular lenses Part 7: Clinical investigations | |
| Ophthalmic implants Intraocular lenses Part 8: Fundamental requirements | |
| Ophthalmic implants Intraocular lenses Part 9: Multifocal intraocular lenses | |
| Ophthalmic Instruments - Perimeters | |
| Ophthalmic Instruments - Retinoscopes | |
| Ophthalmic Instruments - Trial Frames | |
| Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) | |
| Ophthalmic Optics - Contact Lenses - Determination of Rigid Lens Flexure and Breakage | |
| Ophthalmic optics - Contact lenses - Determination of scattered light | |
| Ophthalmic optics - Contact lenses - Determination of shelf-life | |
| Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Determination of Physical Compatibility of Contact Lens Care Products with Contact Lenses | |
| Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidance for Clinical Investigations | |
| Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for the Determination of Preservative Uptake and Release | |
| Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Information Supplied by the Manufacturer | |
| Ophthalmic Optics - Spectacle Frames - General Requirements and Test Methods | |
| Ophthalmic optics \x97 Contact lenses and contact lens care products \x97 Labelling | |
| Opthalmic Optics - Format of Digital Data Files for Data Transfer for Profiling of Spectacle Lenses - Part 1: Two-Dimensional Tracers | |
| Optics and Optical Instruments - Lasers and Laser-Related Equipment - Determination of Laser Resistance of Tracheal Tube Shafts | |
| Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient-protective covers | |
| Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester | |
| Packaging - Sacks Made From Thermoplastic Flexible Film - Tear Propagation on Edge Folds | |
| Packaging - Tactile Warnings of Danger - Requirements | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 1: General Introduction | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 2: Classification of Environments | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 3: Design Considerations | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface and Surface Preparation | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 5: Protective Paint Systems | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 7: Execution and Supervision of Paintwork | |
| Paints and varnishes - Determination of mar resistance - Part 1: Method using a curved stylus | |
| Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus | |
| Paints and varnishes - Determination of mar resistance | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions Part 3: Testing of coating systems on materials and components in automotive construction | |
| Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method | |
| Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 2: Gas-Chromatographic Method | |
| Paints and Varnishes - Determination of Wet-Scrub Resistance and Cleanability of Coatings | |
| Paints and varnishes \x96 Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content Part 2: Gas-chromatographic method | |
| Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements | |
| Personal flotation devices - Part 3: Lifejackets, performance level 150 - Safety requirements | |
| Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety Requirements | |
| Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements | |
| Personal flotation devices - Part 5: Buoyancy aids (level 50) Safety requirements | |
| Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods | |
| Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods | |
| Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods | |
| Personal flotation devices - Part 8: Accessories - Safety requirements and test methods | |
| Personal flotation devices - Part 9: Test methods | |
| Personal flotation devices \x97 Part 10: Selection and application of personal flotation devices and other relevant devices | |
| Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements | |
| Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements | |
| Personal protective equipment \x97 Test methods for sunglasses and related eyewear | |
| Petroleum and natural gas industries - Steel drill pipe | |
| Petroleum and Natural Gas Industries - Steel Pipes for Use as Casing or Tubing for Wells | |
| Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures | |
| Petroleum and natural gas industries. Steel pipes for use as drill pipe. Specification | |
| Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers | |
| Petroleum, petrochemical and natural gas industries - Spiral plate heat exchangers | |
| Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method | |
| Plastics - Fluoropolymer Dispersions and Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specification | |
| Plastics - Fluoropolymer Dispersions and Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of pH of Aqueous Extract | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) | |
| Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method | |
| Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method | |
| Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method | |
| Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods | |
| Plastics - Polycarbonate Sheets - Types, Dimensions and Characteristics | |
| Plastics - Polyvinyl Chloride Resins - Determination of Number of Impurities and Foreign Particles | |
| Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm | |
| Plastics \x97 Unplasticized poly(vinyl chloride) sheets \x97 Types, dimensions and characteristics \x97 Part 2: Sheets of thickness less than 1 mm | |
| Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method | |
| Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method | |
| Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 2: Single-Flame Source Test | |
| Reaction to fire tests for products - Non-combustibility test | |
| Refractory products Determination of resistance to carbon monoxide | |
| Rice - Determination of biometric characteristics of kernels | |
| Rice - Determination of rice kernel resistance to extrusion after cooking | |
| Rice \x96 Determination of biometric characteristics of kernels | |
| Road vehicles \x97 Liquefied natural gas (LNG) refuelling connector \x97 3,1 MPa connector | |
| Rubber and Plastics Hoses - Exposure to a Xenon Arc Lamp - Determination of Changes in Colour and Appearance | |
| Safe transport of radioactive materials - Leakage testing on packages | |
| Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology | |
| Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles | |
| Safety of machinery - General principles for design - Risk assessment and risk reduction | |
| Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology | |
| Safety of machinery Basic concepts, general principles for design Part 2: Technical principles | |
| Ships and Marine Technology - Heading Control Systems | |
| Slotted cheese head screws - Product grade A | |
| Small craft - Deck safety harness and safety line - Safety requirements and test methods | |
| Small Craft - Hull Construction and Scantlings - Part 1: Materials: Thermosetting Resins, Glass-Fibre Reinforcement, Reference Laminate | |
| Small Craft - Hull Construction and Scantlings - Part 2: Materials: Core Materials for Sandwich Construction, Embedded Materials | |
| Small Craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials | |
| Small Craft - Hull Construction and Scantlings - Part 4: Workshop and Manufacturing | |
| Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination | |
| Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details | |
| Small craft - Hull construction and scantlings Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5 | |
| Small craft - Hull construction and scantlings Part 8: Rudders | |
| Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m | |
| Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m | |
| Small Craft - Watertight Cockpits and Quick-Draining Cockpits | |
| Small craft - Watertight or quick-draining recesses and cockpits | |
| Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements | |
| Small craft \x97 Hull construction and scantlings Part 10: Rig loads and rig attachment in sailing craft | |
| Small craft \x97 Hull construction and scantlings Part 9: Sailing craft appendages | |
| Small craft \x97 Windows, portlights, hatches, deadlights and doors \x97 Strength and watertightness requirements | |
| Small Craft Stability and Buoyancy Assessment and Categorization Part 1: Non-Sailing Boats of Hull Length Greater Than or Equal to 6 m | |
| Small Craft Stability and Buoyancy Assessment and Categorization Part 2: Sailing Boats of Hull Length Greater Than or Equal to 6 m | |
| Small craft Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m | |
| Small Craft Windows, Portlights, Hatches, Deadlights and Doors Strength and Watertightness Requirements | |
| Soil quality - Determination of selected explosives and related compounds Part 3: Method using liquid chromatography-tande m mass spectrometry (LC-MS/MS) | |
| Soil quality - Guidance on the selection and application of screening methods | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 4: Extraction of humic substances from solid samples | |
| Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Part 5: Extraction of humic substances from aqueous samples | |
| Solder Wire, Solid and Flux Cored - Specification and Test Methods - Part 1: Classification and Performance Requirements | |
| Solder wire, solid and flux cored Specifications and tests methods Part 3: Wetting balance test method for flux core solder wire efficacy | |
| Specification and approval of welding procedures for production welding of steel castings | |
| Split Pins | |
| Standard test method for assessing the ignition propensity of cigarettes | |
| Sterilization of health care products - Microbiological methods Part 1: Determination of a population of microorganisms on products | |
| Sterilization of Medical Devices - Microbiological Methods - Part 2: Tests of Sterility Performed in the Validation of a Sterilization Process | |
| Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products | |
| Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines | |
| Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems | |
| Technical product documentation (TPD) - Presentation of dimensions and tolerances Part 1: General principles | |
| Technical product documentation (TPD) \x96 General principles of representation Part 1: Introduction and fundamental requirements | |
| Technical product documentation (TPD) \x97 Presentation of dimensions and tolerances Part 1: General principles | |
| Technical product documentation (TPD). General principles of representation | |
| Technical product documentation - General principles of representation Part 2: Basic conventions for lines | |
| Technical product documentation - General principles of representation Part 3: Views, sections and cuts | |
| Technical product documentation \x97 General principles of representation Part 100: Index | |
| Textile floor coverings - Determination of resistance to delamination | |
| Textile-Glass-Reinfo rced Plastics - Prepregs, Moulding Compounds and Laminates - Determination of the Textile-Glass and Mineral-Filler Content - Calcination Methods | |
| Textiles - Determination of the Resistance of Cellulose-Containing Textiles to Micro-Organisms - Soil Burial Test - Part 1: Assessment of Rot-Retardant Finishing | |
| Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish | |
| Textiles - Domestic Laundering Procedures for Textile Fabrics Prior to Flammability Testing | |
| Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, sodium ions and pH | |
| Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation | |
| Thermal insulating products for building equipment and industrial installations \x97 Determination of dimensions, squareness and linearity of preformed pipe insulation | |
| Thermal Insulation for Building Equipment and Industrial Installations - Calculation Rules | |
| Thermal Insulation in Buildings - Determination of Air Change in Buildings - Tracer Gas Dilution Method | |
| Thermal performance of curtain walling - Calculation of thermal transmittance | |
| Thermal Performance of Windows and Doors - Determination of Thermal Transmittance by Hot Box Method - Part 1: Complete Windows and Doors | |
| Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows | |
| Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions | |
| Thermal spraying - Recommendations for thermal spraying | |
| Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings | |
| Thermoplastics materials for pipes and fittings for pressure applications. Classification and design. Overall service (design) coefficient | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids \x97 Determination of the resistance to internal pressure \x97 Part 3: Preparation of components | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 2: Preparation of pipe test pieces | |
| Tissue paper and tissue products - Part 1: General guidance on terms | |
| Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density | |
| Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption | |
| Tissue paper and tissue products - Part 5: Determination of wet tensile strength | |
| Tissue paper and tissue products - Part 6: Determination of grammage | |
| Tissue paper and tissue products - Part 7: Determination of optical properties | |
| Tissue paper and tissue products - Part 9: Determination of ball burst strength | |
| Tissue paper and tissue products Part 11: Determination of wet ball burst strength | |
| Tissue paper and tissue products Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency | |
| Tissue paper and tissue products Part 15: Determination of optical properties \x97 Measurement of brightness and colour with C/2\xb0 (indoor daylight) illuminant | |
| Tissue paper and tissue products Part 16: Determination of optical properties \x97 Opacity (paper backing) \x97 Diffuse reflectance method | |
| Tissue paper and tissue products Part 17: Determination of disintegration in water | |
| Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method | |
| Tracked Changes (Redline) - Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit... | |
| Tracked Changes (Redline) - Agricultural and forestry machinery \x97 Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers \x97 Part 1: Machines fitted with an integral combustion engine... | |
| Tracked Changes (Redline) - Animal feeding stuffs, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry | |
| Tracked Changes (Redline) - Binders for paints and varnishes - Amino resins - General methods of test | |
| Tracked Changes (Redline) - Building construction - Organization of information about construction works - Part 3: Framework for object-oriented information | |
| Tracked Changes (Redline) - Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria | |
| Tracked Changes (Redline) - Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning | |
| Tracked Changes (Redline) - Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation | |
| Tracked Changes (Redline) - Building environment design \x97 Embedded radiant heating and cooling systems \x97 Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active... | |
| Tracked Changes (Redline) - Cardiovascular implants and extracorporeal systems \x97 Vascular device-drug combination products \x97 Part 1: General requirements | |
| Tracked Changes (Redline) - Cathodic protection of steel in concrete | |
| Tracked Changes (Redline) - Connections for general use and fluid power \x97 Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing \x97 Heavy-duty (S series) and... | |
| Tracked Changes (Redline) - Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmetic product | |
| Tracked Changes (Redline) - Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor | |
| Tracked Changes (Redline) - Dentistry \x97 Digitizing devices for CAD/CAM systems for indirect dental restorations \x97 Test methods for assessing accuracy | |
| Tracked Changes (Redline) - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method | |
| Tracked Changes (Redline) - Electronic fee collection - Information exchange between service provision and toll charging | |
| Tracked Changes (Redline) - Electronic fee collection \x97 Compliance check communication for autonomous systems | |
| Tracked Changes (Redline) - Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use | |
| Tracked Changes (Redline) - Eye and face protection against intense light sources used on humans and animals for cosmetic and medical applications \x97 Part 1: Specification for products | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments | |
| Tracked Changes (Redline) - Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts | |
| Tracked Changes (Redline) - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass | |
| Tracked Changes (Redline) - Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass | |
| Tracked Changes (Redline) - Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability | |
| Tracked Changes (Redline) - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing | |
| Tracked Changes (Redline) - Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance | |
| Tracked Changes (Redline) - Glass packaging \x96 26 H 126 crown finish \x96 Dimensions | |
| Tracked Changes (Redline) - Graphic technology \x97 Safety requirements for graphic technology equipment and systems \x97 Part 5: Manually-fed stand-alone platen presses | |
| Tracked Changes (Redline) - Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management | |
| Tracked Changes (Redline) - Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties | |
| Tracked Changes (Redline) - Hygrothermal performance of building materials and products \x97 Determination of water vapour transmission properties \x97 Cup method | |
| Tracked Changes (Redline) - Integrated optics - Vocabulary - Part 1: Optical waveguide basic terms and symbols | |
| Tracked Changes (Redline) - Lasers and laser-related equipment \x97 Test methods for laser beam parameters \x97 Polarization | |
| Tracked Changes (Redline) - Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and... | |
| Tracked Changes (Redline) - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service | |
| Tracked Changes (Redline) - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service | |
| Tracked Changes (Redline) - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine | |
| Tracked Changes (Redline) - Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source | |
| Tracked Changes (Redline) - Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks | |
| Tracked Changes (Redline) - Milk and milk products \x97 Determination of alkaline phosphatase activity | |
| Tracked Changes (Redline) - Molecular biomarker analysis - Requirements and guidance for single-laboratory validation of qualitative real-time polymerase chain reaction (PCR) methods | |
| Tracked Changes (Redline) - Non-destructive testing - Industrial radiographic films Part 2: Control of film processing by means of reference values | |
| Tracked Changes (Redline) - Nuclear fuel technology - Controlled-potential coulometric measurement of plutonium | |
| Tracked Changes (Redline) - Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content | |
| Tracked Changes (Redline) - Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia | |
| Tracked Changes (Redline) - Ophthalmic implants - Intraocular lenses Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes | |
| Tracked Changes (Redline) - Ophthalmic implants \x96 Intraocular lenses Part 1: Vocabulary | |
| Tracked Changes (Redline) - Ophthalmic implants \x97 Intraocular lenses \x97 Part 2: Optical properties and test methods | |
| Tracked Changes (Redline) - Ophthalmic optics \x97 Contact lenses and contact lens care products \x97 Determination of physical compatibility of contact lens care products with contact lenses | |
| Tracked Changes (Redline) - Ophthalmic optics \x97 Contact lenses and contact lens care products \x97 Determination of preservative uptake and release | |
| Tracked Changes (Redline) - Ophthalmic optics \x97 Contact lenses and contact lens care products \x97 Requirements and guidance for clinical investigations | |
| Tracked Changes (Redline) - Ophthalmic optics \x97 Spectacle frames \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 4: Types of surface and surface preparation | |
| Tracked Changes (Redline) - Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 7: Execution and supervision of paint work | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination | |
| Tracked Changes (Redline) - Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Corrosion protection of steel structures by protective paint systems Part 1: General introduction | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Corrosion protection of steel structures by protective paint systems Part 2: Classification of environments | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Corrosion protection of steel structures by protective paint systems Part 3: Design considerations | |
| Tracked Changes (Redline) - Personal protective equipment \x97 Test methods for sunglasses and related eyewear | |
| Tracked Changes (Redline) - Plastics - Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pycnometer method and titration method | |
| Tracked Changes (Redline) - Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods | |
| Tracked Changes (Redline) - Plastics \x96 Methods for determining the density of non-cellular plastics Part 2: Density gradient column method | |
| Tracked Changes (Redline) - Reaction to fire tests \x96 Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test | |
| Tracked Changes (Redline) - Rice \x97 Determination of biometric characteristics of kernels | |
| Tracked Changes (Redline) - Small craft - Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials | |
| Tracked Changes (Redline) - Small craft - Hull construction and scantlings Part 4: Workshop and manufacturing | |
| Tracked Changes (Redline) - Small craft - Hull construction and scantlings Part 8: Rudders | |
| Tracked Changes (Redline) - Small craft - Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m | |
| Tracked Changes (Redline) - Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements | |
| Tracked Changes (Redline) - Small craft \x96 Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate | |
| Tracked Changes (Redline) - Small craft \x96 Hull construction and scantlings Part 2: Materials: Core materials for sandwich construction, embedded materials | |
| Tracked Changes (Redline) - Small craft \x96 Hull construction and scantlings Part 6: Structural arrangements and details | |
| Tracked Changes (Redline) - Small craft \x96 Hull construction and scantlings Part 9: Sailing craft appendages | |
| Tracked Changes (Redline) - Small craft \x96 Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m | |
| Tracked Changes (Redline) - Small craft \x97 Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m | |
| Tracked Changes (Redline) - Solder wire, solid and flux-cored - Specification and test methods - Part 2: Determination of flux content | |
| Tracked Changes (Redline) - Solder wire, solid and flux-cored \x97 Specification and test methods \x97 Part 1: Classification and performance requirements | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for production welding of steel castings | |
| Tracked Changes (Redline) - Standard test method for assessing the ignition propensity of cigarettes | |
| Tracked Changes (Redline) - Technical product documentation (TPD) - General principles of representation - Part 3: Views, sections and cuts | |
| Tracked Changes (Redline) - Technical product documentation (TPD) \x97 General principles of representation Part 2: Basic conventions for lines | |
| Tracked Changes (Redline) - Textile-glass-reinfo rced plastics \x97 Prepregs, moulding compounds and laminates \x97 Determination of the textile-glass and mineral-filler content using calcination methods | |
| Tracked Changes (Redline) - Textiles \x96 Domestic laundering procedures for textile fabrics prior to flammability testing | |
| Tracked Changes (Redline) - Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation | |
| Tracked Changes (Redline) - Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation | |
| Tracked Changes (Redline) - Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation | |
| Tracked Changes (Redline) - Thermal insulating products for building equipment and industrial installations \x97 Determination of trace quantities of water-soluble chloride, fluoride, silicate, sodium ions and pH | |
| Tracked Changes (Redline) - Thermal insulation for building equipment and industrial installations - Calculation rules | |
| Tracked Changes (Redline) - Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method | |
| Tracked Changes (Redline) - Thermal performance of curtain walling - Calculation of thermal transmittance | |
| Tracked Changes (Redline) - Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency | |
| Tracked Changes (Redline) - Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2\xb0 (indoor daylight) illuminant | |
| Tracked Changes (Redline) - Tissue paper and tissue products - Part 16: Determination of optical properties - Diffuse reflectance method for opacity (paper backing) | |
| Tracked Changes (Redline) - Tissue paper and tissue products - Part 5: Determination of wet tensile strength | |
| Tracked Changes (Redline) - Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10\xb0 (outdoor daylight) | |
| Tracked Changes (Redline) - Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption | |
| Tracked Changes (Redline) - Tissue paper and tissue products Part 6: Determination of grammage | |
| Tracked Changes (Redline) - Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) | |
| Tracked Changes (Redline) - Water quality \x96 Gross alpha and gross beta activity \x96 Test method using liquid scintillation counting | |
| Tracked Changes (Redline) - Welding consumables \x97 Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys \x97 Classification | |
| Tracked Changes (Redline) - Wood-based panels \x97 Determination of formaldehyde release \x97 Part 3: Gas analysis method | |
| Tracked Changes (Redline) \x96 Plastics - Unplasticized poly(vinyl chloride) sheets Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm | |
| Tracked Changes (Redline) \x96 Tissue paper and tissue products Part 1: Vocabulary | |
| Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector | |
| Water quality - Detection and enumeration of Legionella - Part 2: Direct membrane filtration method for waters with low bacterial counts | |
| Water Quality - Determination of 33 Elements by Inductively Coupled Plasma Atomic Emission Spectroscopy | |
| Water quality - Determination of aluminium - Atomic absorption spectrometric methods | |
| Water Quality - Determination of Ammonium Nitrogen by Flow Analysis (CFA and FIA) and Spectrometric Detection | |
| Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) | |
| Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment | |
| Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate | |
| Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) | |
| Water quality - Enumeration of Legionella | |
| Water quality - Evaluation of the \x93Ultimate\x94 anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production | |
| Water Quality - Evaluation of the Elimination and Biodegradability of Organic Compounds in an Aqueous Medium - Activated Sludge Simulation Test | |
| Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method | |
| Welding \x97 Laser-arc hybrid welding of steels, nickel and nickel alloys \x97 Quality levels for imperfections | |
| Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification | |
| Wood- based panels \x97 Determination of formaldehyde release Part 5: Extraction method (called the perforator method) | |
| Wood-based panels \x97 Determination of formaldehyde release Part 2: Small-scale chamber method | |
| Wood-based panels \x97 Determination of formaldehyde release Part 3: Gas analysis method | |
| Wood-based panels \x97 Determination of formaldehyde release Part 4: Desiccator method |
| << Prev | Next >> |