Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
370
371
372
373
374
375
376
377
378
379
380
381
382
390
400
410
420
430
440
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Field measurement of sound insulation in buildings and of building elements Part 3: Fa\xe7ade sound insulation | |
| Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation | |
| Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound | |
| Acoustics - Noise from shooting ranges Part 3: Guidelines for sound propagation calculations | |
| Acoustics - Noise from shooting ranges Part 5: Noise management | |
| Acoustics - Noise from shooting ranges Part 6: Sound pressure measurements close to the source for determining exposure to sound | |
| Acoustics - Preferred reference values for acoustical and vibratory levels | |
| Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machinery | |
| Acoustics \x97 Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation | |
| Acoustics \x97 Field measurement of sound insulation in buildings and of building elements Part 2: Impact sound insulation | |
| Acoustics \x97 Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor | |
| Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement | |
| Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements | |
| Agricultural and forestry machinery - Environmental requirements for sprayers Part 1: General | |
| Agricultural and forestry machinery - Environmental requirements for sprayers Part 2: Horizontal boom sprayers | |
| Agricultural and forestry machinery - Environmental requirements for sprayers Part 3: Sprayers for bush and tree crops | |
| Agricultural and forestry machinery - Environmental requirements for sprayers Part 5: Aerial spray systems | |
| Agricultural and forestry machinery - Inspection of sprayers in use Part 2: Horizontal boom sprayers | |
| Agricultural and forestry machinery \x97 Environmental requirements for sprayers Part 4: Fixed and semi-mobile sprayers | |
| Agricultural and forestry machinery \x97 Inspection of sprayers in use Part 1: General | |
| Agricultural and forestry machinery \x97 Inspection of sprayers in use Part 3: Sprayers for bush and tree crops | |
| Agricultural and forestry machines \x97 Inspection of sprayers in use Part 4: Fixed and semi mobile sprayers | |
| Agricultural and forestry machines \x97 Inspection of sprayers in use Part 5: Aerial spray systems | |
| Agricultural machinery and tractors \x97 Safety of higher voltage electrical and electronic components and systems Part 1: General requirements | |
| Air filters for general ventilation Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) | |
| Air filters for general ventilation Part 2: Measurement of fractional efficiency and air flow resistance | |
| Air filters for general ventilation Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured | |
| Air filters for general ventilation Part 4: Conditioning method to determine the minimum fractional test efficiency | |
| Anaesthetic and respiratory equipment - Tracheobronchial tubes | |
| Animal and Vegetable Fats and Oils - Determination of Polymerized Triglycerides Content by High-Performance Size-Exclusion Chromatography (HPSEC) | |
| Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) | |
| Animal feeding stuffs - Determination of lysine, methionine and threonine in commercial amino acid products and premixtures | |
| Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method | |
| Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method | |
| Binders for paints and varnishes Determination of glass transition temperature | |
| Building automation and control systems (BACS) - Part 2: Hardware | |
| Building automation and control systems (BACS) - Part 3: Functions | |
| Building automation and control systems (BACS) Part 1: Project specification and implementation | |
| Building automation and control systems (BACS) Part 4: Control applications | |
| Building automation and control systems (BACS) Part 6: Data communication conformance testing | |
| Building automation and control systems - Part 5: Data communication protocol | |
| Building automation and control systems Part 5: Data communication protocol | |
| Butter, edible oil emulsions and spreadable fats Determination of fat content (Reference method) | |
| Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases | |
| Closed end blind rivets with pull mandrel and protruding head A2/SSt | |
| Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity | |
| Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, \x93dry\x94 and \x93wet\x94 conditions | |
| Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open... | |
| Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test... | |
| Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution | |
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut... | |
| Corrosion protection of steel structures by protective paint systems \x97 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x97 Part 1: Pull-off testing | |
| Cosmetics - Microbiology - Enumeration of yeast and mould | |
| Cosmetics - Sun protection test methods - Water immersion procedure for determining water resistance | |
| Data structures for electronic product catalogues for building services Part 1: Concepts, architecture and model | |
| Data structures for electronic product catalogues for building services Part 2: Geometry | |
| Dentistry - Dental rubber dam instruments Part 2: Clamp forceps | |
| Dentistry - Dental rubber dam technique Part 1: Hole punch | |
| Dentistry - Nomenclature of oral anomalies Part 1: Code for the representation of oral anomalies | |
| Dentistry - Nomenclature of oral anomalies Part 2: Developmental anomalies of teeth | |
| Dentistry - Oral hygiene products - Manual interdental brushes | |
| Dentistry \x97 Coiled springs for use in orthodontics | |
| Dentistry \x97 Minimal dental implant data set for clinical use | |
| Dentistry \x97 Test methods for dental unit waterline biofilm treatment | |
| Dentistry \x97 Vocabulary for dental implants systems and related procedure | |
| Dentistry Base metal materials for fixed dental restorations | |
| Dentistry Oral hygiene products Manual interdental brushes | |
| Dentistry Oral hygiene products Oral rinses | |
| Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 Part 1: Test suite structure and test purposes | |
| Electronic fee collection \x96 Evaluation of equipment for conformity to ISO 17575-1 Part 1: Test suite structure and test purposes | |
| Electronic fee collection \x96 Evaluation of equipment for conformity to ISO 17575-1 Part 2: Abstract test suite | |
| Electronic fee collection \x96 Evaluation of equipment for conformity to ISO 17575-3 Part 2: Abstract test suite | |
| Environmental solid matrices \x97 Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) | |
| Eye and face protection for occupational use Part 1: General requirements | |
| Eye and face protection for occupational use Part 2: Additional requirements for protectors used during welding and related techniques | |
| Eye and face protection for occupational use Part 3: Additional requirements for mesh protectors | |
| Fasteners - Types of inspection documents | |
| Fasteners Quality assurance system | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compaction properties of ceramic powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Ceramic composites \x97 Determination of the degree of misalignment in uniaxial mechanical tests | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure \x97 Determination of fatigue properties at constant amplitude (ISO... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at room temperature \x97 Determination of fatigue properties at constant amplitude | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Thermophysical properties of ceramic composites \x97 Determination of thermal expansion | |
| Fishing nets Method of test for the determination of mesh size Part 1: Opening of mesh | |
| Fishing nets Method of test for the determination of mesh size Part 2: Length of mesh | |
| Flame arresters - Performance requirements, test methods and limits for use | |
| Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Part 1: Oilseeds and animal feeding stuffs... | |
| Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Part 2: Cereals, pulses and milled cereal... | |
| Footwear - Critical substances potentially present in footwear and footwear components - Determination of dimethyl fumarat (DMFU) | |
| Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials | |
| Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials | |
| Footwear - Resistance to crack initiation and growth - Belt flex method | |
| Footwear \x97 Critical substances potentially present in footwear and footwear components \x97 Determination of organotin compounds in footwear materials | |
| Footwear \x97 Critical substances potentially present in footwear and footwear components Part 1: Determination of phthalate with solvent extraction | |
| Footwear \x97 Critical substances potentially present in footwear and footwear components Part 2: Determination of phthalate without solvent extraction | |
| Footwear and footwear components \x97 Test method to assess antibacterial activity | |
| Fusion installations \x97 Criteria for the design and operation of confinement and ventilation systems of tritium fusion facilities and fusion fuel handling facilities | |
| Gas analysis - Handling of calibration gases and gas mixtures - Guidelines | |
| Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and followup ultrasonic examination (UT) for periodic inspection and testing | |
| Gas cylinders \x97 Flexible hoses assemblies \x97 Specification and testing | |
| Gas cylinders Refillable seamless steel gas cylinders Acoustic emission testing (AT) for periodic inspection | |
| Gaseous hydrogen land vehicle refuelling connection devices Part 1: Flow capacities up to and including 120 g/s | |
| Gaseous hydrogen land vehicle refuelling connection devices | |
| General requirements for the competence of reference material producers | |
| Geometrical product specification (GPS) - Filtration Part 61: Linear areal filters - Gaussian filters | |
| Geometrical Product Specification (GPS) \x97 Filtration Part 60: Linear areal filters: Basic concepts | |
| Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters | |
| Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters | |
| Geometrical product specifications (GPS) - Filtration Part 1: Overview and basic concepts | |
| Geometrical product specifications (GPS) - Filtration Part 20: Linear profile filters: Basic concepts | |
| Geometrical product specifications (GPS) - Filtration Part 21: Linear profile filters: Gaussian filters | |
| Geometrical product specifications (GPS) - Filtration Part 29: Linear profile filters: Spline wavelets | |
| Geometrical product specifications (GPS) - Filtration Part 30: Robust profile filters: Basic concepts | |
| Geometrical product specifications (GPS) - Filtration Part 40: Morphological profile filters: Basic concepts | |
| Geometrical product specifications (GPS) - Filtration Part 45: Morphological profile filters: Segmentation | |
| Geometrical product specifications (GPS) - Filtration Part 49: Morphological profile filters: Scale space techniques | |
| Geometrical product specifications (GPS) - Filtration Part 62: Linear areal filters: Spline filters | |
| Geometrical product specifications (GPS) \x97 Filtration Part 28: Profile filters: End effects | |
| Geometrical product specifications (GPS) \x97 Filtration Part 31: Robust profile filters: Gaussian regression filters | |
| Geometrical product specifications (GPS) \x97 Filtration Part 71: Robust areal filters: Gaussian regression filters | |
| Geometrical product specifications (GPS) \x97 Filtration Part 85: Morphological areal filters: Segmentation | |
| Geotechnical investigation and testing - Laboratory testing of rock Part 1: Determination of water content | |
| Health informatics - Categorial structure for terminological systems of human anatomy | |
| Health informatics - Terminological resources Part 1: Characteristics | |
| Implants for surgery - Minimum data sets for surgical implants | |
| In situ test methods for high efficiency filter systems in industrial facilities | |
| Industrial valves - Ball valves of thermoplastics materials | |
| Industrial valves - Butterfly valves of thermoplastics materials | |
| Industrial valves - Gate valves of thermoplastics materials | |
| Industrial valves \x97 Ball valves of thermoplastic materials | |
| Industrial valves \x97 Butterfly valves of thermoplastics materials | |
| Industrial valves \x97 Check valves of thermoplastics materials | |
| Industrial valves \x97 Diaphragm valves of thermoplastics materials | |
| Industrial valves \x97 Gate valves of thermoplastics materials | |
| Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries Part 1: Data schema | |
| Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries | |
| Instrumentation for use in association with non-active surgical implants - General requirements | |
| Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces | |
| Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology | |
| Intelligent transport systems - Automatic vehicle and equipment identification - Numbering and data structures | |
| Intelligent transport systems - Automatic vehicle and equipment identification - System parameters | |
| Intelligent transport systems \x97 Automatic vehicle and equipment identification \x97 Intermodal goods transport numbering and data structures | |
| Laboratory glassware \x97 Vacuum-jacketed vessels for heat insulation | |
| Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography | |
| Leather - Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis | |
| Leather - Chemical determination of formaldehyde content Part 3: Determination of formaldehyde emissions from leather | |
| Leather - Chemical determination of metal content Part 1: Extractable metals | |
| Leather - Chemical determination of metal content Part 2: Total metal content | |
| Leather - Chemical tests - Determination of chromium(VI) content | |
| Leather - Chemical tests - Determination of pentachlorophenol content | |
| Leather - Chemical tests for the determination of certain azo colorants in dyed leathers Part 1: Determination of certain aromatic amines derived from azo colorants | |
| Leather - Chemical tests for the determination of certain azo colorants in dyed leathers Part 2: Determination of 4-aminoazobenzene | |
| Leather - Determination of abrasion resistance - Part 1: Taber method | |
| Leather - Determination of abrasion resistance Part 2: Martindale ball plate method | |
| Leather - Identification of leather with microscopy | |
| Leather - Physical and mechanical tests - Determination of dimensional change | |
| Leather - Physical and mechanical tests - Determination of dry heat resistance of leather | |
| Leather - Physical and mechanical tests - Determination of fogging characteristics | |
| Leather - Physical and mechanical tests - Determination of heat resistance of patent leather | |
| Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame | |
| Leather - Physical and mechanical tests - Determination of surface coating thickness | |
| Leather - Physical and mechanical tests - Determination of water penetration pressure | |
| Leather - Physical and mechanical tests - Determination of water repellency of garment leather | |
| Leather - Physical and mechanical tests - Determination of water vapour absorption | |
| Leather \x97 Chemical determination of chromium(VI) content in leather Part 1: Colorimetric method | |
| Leather \x97 Chemical determination of chromium(VI) content in leather Part 2: Chromatographic method | |
| Leather \x97 Tests for colour fastness \x97 Change in colour with accelerated ageing | |
| Leather Physical and mechanical tests Determination of cold crack temperature of surface coatings | |
| Leather Physical and mechanical tests Determination of extension set | |
| Leather Physical and mechanical tests Determination of softness | |
| Machine tools - Safety - Sawing machines for cold metal | |
| Machine tools \x97 Safety \x97 Stationary grinding machines | |
| Machine tools safety - Presses Part 1: General safety requirements | |
| Machine tools safety \x96 Machining centres, Milling machines, Transfer machines Part 1: Safety requirements | |
| Machine tools safety \x96 Presses Part 3: Safety requirements for hydraulic presses | |
| Machine tools safety \x97 Presses Part 2: Safety requirement for mechanical presses | |
| Machine tools safety \x97 Presses Part 4: Safety requirements for pneumatic presses | |
| Measurement of radioactivity in the environment \x97 Air \x97 Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors | |
| Metal ball valves for petroleum, petrochemical and allied industries | |
| Metallic and other inorganic coatings - Definitions and conventions concerning appearance | |
| Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) | |
| Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems | |
| Metallic materials \x97 Leeb hardness test Part 1: Test method | |
| Metallic materials \x97 Leeb hardness test Part 2: Verification and calibration of the testing devices | |
| Metallic materials \x97 Leeb hardness test Part 3: Calibration of reference test blocks | |
| Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique | |
| Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature | |
| Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for the Detection of Escherichia Coli 0157 | |
| Microbiology of Food and Animal Feeding Stuffs - Protocol for the Validation of Alternative Methods | |
| Microbiology of food and animal feeding stuffs \x97 Horizontal method for the detection of Escherichia coli O157 \x97 Inclusion of performance testing of all culture media and reagent | |
| Microbiology of the food chain - Method validation Part 1: Vocabulary | |
| Microbiology of the food chain - Method validation Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method | |
| Microbiology of the food chain - Method validation Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory | |
| Microbiology of the food chain - Method validation Part 4: Protocol for method validation in a single laboratory | |
| Microbiology of the food chain - Method validation Part 7: Protocol for the validation of identification methods of microorganisms | |
| Microbiology of the food chain \x97 Horizontal method for the enumeration of beta-glucuronidase-p ositive Escherichia coli Part 3: Detection and most probable number technique using 5-bromo-4- chloro-3-indolyl-\xd f-D-glucuronide | |
| Microbiology of the food chain \x97 Method validation Part 4: Protocol for method validation in a single laboratory | |
| Microbiology of the food chain \x97 Method validation Part 5: Protocol for factorial interlaboratory validation for nonproprietary methods | |
| Microbiology of the food chain \x97 Method validation Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures | |
| Milk - Bacterial count - Protocol for the evaluation of alternative methods | |
| Milk, milk products, infant formula and adult nutritionals \x97 Determination of fatty acids composition \x97 Capillary gas chromatographic method | |
| Molecular biomarker analysis - DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals | |
| Nanotechnology \x97 Nanoparticles in powder form \x97 Characteristics and measurements | |
| Natural gas \x97 Determination of sulfur compounds \x97 Determination of total sulfur by oxidative microcoulometry method | |
| Natural gas fuelling stations - CNG stations for fuelling vehicles | |
| Natural gas fuelling stations - LNG stations for fuelling vehicles | |
| Non-alloy steel wire rod for conversion to wire Part 1: General requirements | |
| Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general-purpose wire rod | |
| Non-alloy steel wire rod for conversion to wire Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod | |
| Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications | |
| Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates Part 2: General principles for testing of metallic materials using X-rays and gamma rays | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage Part 3: Spectrometric method | |
| Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic equipment for the determination of thickness | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage Part 1: Voltage divider method | |
| Non-destructive testing \x96 Measurement and evaluation of the X-ray tube voltage Part 2: Constancy check by the thick filter method | |
| Non-destructive testing \x96 Ultrasonic thickness measurement | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Characterization and sizing of discontinuities | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Examination for discontinuities perpendicular to the surface | |
| Non-destructive testing \x97 Ultrasonic testing \x97 General principles | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Sensitivity and range setting | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Specification for step wedge calibration block | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Time-offlight diffraction technique as a method for detection and sizing of discontinuities | |
| Non-destructive testing \x97 Ultrasonic testing \x97 Transmission technique | |
| Nuclear energy - Determination of Gd2O3 content in pellets containing uranium oxide by X-ray fluorescence spectrometry | |
| Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements | |
| Nuclear energy \x97 Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) | |
| Nuclear facilities \x97 Criteria for design and operation of confinement systems for nuclear worksite and for nuclear installations under decommissioning | |
| Nuclear fuel technology - Guidelines for ceramographic preparation of UO2 sintered pellets for microstructure examination | |
| Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) | |
| Open end blind rivets with break pull mandrel and countersunk head Cu/St or Cu/Br or Cu/SSt | |
| Open end blind rivets with break pull mandrel and protruding head Cu/St or Cu/Br or Cu/SSt | |
| Open end blind rivets with break pull mandrel and protruding head NiCu/St or NiCu/SSt | |
| Ophthalmic implants - Irrigating solutions for ophthalmic surgery | |
| Ophthalmic implants - Ocular endotamponades | |
| Ophthalmic implants Irrigating solutions for ophthalmic surgery | |
| Ophthalmic Optics - Information Interchange for Ophthalmic Optical Equipment | |
| Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 | |
| Packaging - Transport Packaging for Dangerous Goods - Test Methods | |
| Packaging \x97 Transport packages for dangerous goods \x97 Recycled plastics material | |
| Packaging Transport packaging for dangerous goods Plastics compatibility testing | |
| Packaging Transport packaging for dangerous goods Test methods for IBCs | |
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions | |
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data | |
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens Part 3: Processing and analysis of data from dummy cells | |
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens Part 4: Examples of spectra of polymer-coated specimens | |
| Paints and varnishes - Evaluation of sag resistance | |
| Paints and varnishes - Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps | |
| Paints and varnishes - T-bend test | |
| Paints and varnishes \x97 Determination of the overcoatability and recoatability of a coating | |
| Paints and varnishes \x97 Determination of the resistance of coatings to pressure water-jetting | |
| Paints and varnishes \x97 Methods of exposure to laboratory light sources Part 1: General guidance | |
| Paints and varnishes \x97 Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps | |
| Paints and varnishes \x97 Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels | |
| Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels | |
| Petroleum and natural gas industries - Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels | |
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods | |
| Petroleum and natural gas industries \x97 Characteristics of LNG, influencing the design, and material selection | |
| Petroleum and natural gas industries \x97 Design and testing of LNG marine transfer arms for conventional onshore terminals | |
| Petroleum and natural gas industries \x97 Pipeline transportation systems \x97 Design, construction and maintenance of steel cased pipelines | |
| Petroleum and natural gas industries \x97 Well integrity Part 1: Life cycle governance | |
| Petroleum and natural gas industries Shell-and-tube heat exchangers | |
| Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples | |
| Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment | |
| Petroleum and natural gas industries. Drilling and production equipment. Practices for side-pocket mandrels and related equipment CD-ROM | |
| Petroleum products - Determination of sulfur content - Oxidative microcoulometry method | |
| Petroleum, petrochemical and natural gas industries \x97 Internal coating and lining of steel storage tanks | |
| Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test | |
| Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles | |
| Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 2: Poly(Vinyl Chloride) Resins | |
| Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles | |
| Plastics - Determination of Viscosity Number and Limiting Viscosity number - Part 3: Polyethylenes and Polypropylenes | |
| Plastics - Liquid Resins - Determination of Density by the Pyknometer Method | |
| Plastics - Phenol-Formaldehyde Mouldings - Detection of Free Ammonia | |
| Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications | |
| Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis in Water | |
| Plastics \x97 Polyamide (PA) moulding and extrusion materials Part 1: Designation system, marking of products and basis for specifications | |
| Plastics \x97 Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering | |
| Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes | |
| Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 3: Fittings | |
| Plastics piping systems for the supply of gaseous fuels \x96 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves | |
| Plastics piping systems for the supply of gaseous fuels \x97 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General | |
| Plastics piping systems for the supply of gaseous fuels \x97 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves | |
| Plastics piping systems for the supply of gaseous fuels \x97 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 5: Fitness for purpose of the system | |
| Radiological protection - Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources | |
| Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry | |
| Radiological protection \x96 Medical electron accelerators \x96 Requirements and recommendations for shielding design and evaluation | |
| Radiological protection \x96 Monitoring and internal dosimetry for specific materials Part 1: Inhalation of uranium compounds | |
| Radiological protection \x97 Monitoring and internal dosimetry for specific materials Part 2: Ingestion of uranium compounds | |
| Reaction to Fire Tests for Building Products - Determination of the Heat of Combustion | |
| Reciprocating positive displacement pumps and pump units - Technical requirements | |
| Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg | |
| Resilient floor coverings - Determination of seam strength | |
| Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) | |
| Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels | |
| Respiratory protective devices \x96 Vocabulary and graphical symbols | |
| Road vehicles - Blended fuels refuelling connector | |
| Road vehicles Ergonomic aspects of transport information and control systems Procedure for assessing suitability for use while driving | |
| Safety footwear with resistance to chain saw cutting | |
| Self-propelled agricultural machinery - Assessment of stability Part 1: Principles | |
| Self-propelled agricultural machinery \x97 Assessment of stability Part 2: Determination of static stability and test procedures | |
| Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components | |
| Small craft - Navigation lights - Installation, placement and visibility | |
| Small craft \x97 Electric propulsion system | |
| Small craft Inboard diesel engines Engine-mounted fuel and electrical components | |
| Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography | |
| Soil quality - Guidance on the establishment and maintenance of monitoring programmes | |
| Soil quality - Laboratory methods for determination of microbial soil respiration | |
| Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis | |
| Soil quality - Risk-based petroleum hydrocarbons Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) | |
| Soil quality \x97 Determination of abundance and activity of soil microflora using respiration curves | |
| Soil quality \x97 Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) | |
| Soil quality \x97 Effects of contaminants on Enchytraeidae (Enchytraeus sp.) \x97 Determination of effects on reproduction | |
| Soil quality \x97 Plant-based test to assess the environmental bioavailability of trace elements to plants | |
| Soil quality \x97 Risk-based petroleum hydrocarbons Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) | |
| Solid biofuels - Determination of minor elements | |
| Solid biofuels - Determination of the water soluble chloride, sodium and potassium content | |
| Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen | |
| Solid biofuels - Fuel specifications and classes Part 1: General requirements | |
| Solid biofuels - Fuel specifications and classes Part 4: Graded wood chips | |
| Solid biofuels - Fuel specifications and classes Part 7: Graded non-woody briquettes | |
| Solid biofuels - Fuel specifications and classes Part 9: Graded hog fuel and wood chips for industrial use | |
| Solid biofuels \x97 Conversion of analytical results from one basis to another | |
| Solid biofuels \x97 Determination of major elements \x97 Al, Ca, Fe, Mg, P, K, Si, Na and Ti | |
| Solid biofuels \x97 Determination of total content of sulfur and chlorine | |
| Solid biofuels \x97 Fuel specifications and classes Part 2: Graded wood pellets | |
| Solid biofuels \x97 Fuel specifications and classes Part 3: Graded wood briquettes | |
| Solid biofuels \x97 Fuel specifications and classes Part 5: Graded firewood | |
| Solid biofuels \x97 Fuel specifications and classes Part 6: Graded non-woody pellets | |
| Solid biofuels \x97 Fuel specifications and classes Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use | |
| Solid biofuels \x97 Terminology, definitions and descriptions | |
| Space systems - Integrated logistic support | |
| Starch - Determination of Moisture Content - Oven-Drying Method | |
| Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts Part 1: Manual reference method | |
| Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts Part 2: Automated measuring systems | |
| Steel wire ropes \x97 Pulling eyes for rope installation \x97 Types and minimum requirements | |
| Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities | |
| Systems for evacuation of plume generated by medical devices | |
| Technical aids for disabled persons - Environmental control systems for daily living | |
| Technical Drawings - Dimensioning and Tolerancing of Profiles | |
| Test methods for evaluating degradation of characteristics of cleanable filter media | |
| Textile conveyor belts Determination of the net length of an endless (spliced) conveyor belt | |
| Textiles \x97 Dyestuffs Part 1: General principles of testing coloured textiles for dyestuff identification | |
| Textiles \x97 Dyestuffs Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) | |
| Textiles \x97 Dyestuffs Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methan ol) | |
| Thermal insulating products for building applications - Determination of long-term water absorption by diffusion | |
| Thermal insulating products for building applications - Determination of long-term water absorption by immersion | |
| Thermal insulating products for building applications \x96 Determination of compressive creep | |
| Thermal insulating products for building applications \x96 Determination of freeze-thaw resistance | |
| Tracked Changes (Redline) - Acoustics - Field measurement of sound insulation in buildings and of building elements Part 2: Impact sound insulation | |
| Tracked Changes (Redline) - Acoustics - Noise from shooting ranges - Part 2: Calculation of muzzle blast | |
| Tracked Changes (Redline) - Acoustics - Noise from shooting ranges Part 1: Determination of muzzle blast by measurement | |
| Tracked Changes (Redline) - Acoustics - Noise from shooting ranges Part 3: Sound propagation calculations | |
| Tracked Changes (Redline) - Acoustics \x97 Noise from shooting ranges \x97 Part 4: Calculation of projectile sound | |
| Tracked Changes (Redline) - Acoustics \x97 Preferred reference values for acoustical and vibratory levels | |
| Tracked Changes (Redline) - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops | |
| Tracked Changes (Redline) - Agricultural and forestry machinery - Inspection of sprayers in use Part 2: Horizontal boom sprayers | |
| Tracked Changes (Redline) - Agricultural and forestry machinery \x97 Inspection of sprayers in use \x97 Part 1: General | |
| Tracked Changes (Redline) - Agricultural and forestry machinery \x97 Inspection of sprayers in use \x97 Part 4: Fixed and semi-mobile sprayers | |
| Tracked Changes (Redline) - Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance | |
| Tracked Changes (Redline) - Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured | |
| Tracked Changes (Redline) - Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency | |
| Tracked Changes (Redline) - Anaesthetic and respiratory equipment - Tracheobronchial tubes | |
| Tracked Changes (Redline) - Building automation and control systems (BACS) - Part 2: Hardware | |
| Tracked Changes (Redline) - Building automation and control systems (BACS) \x97 Part 1: Project specification and implementation | |
| Tracked Changes (Redline) - Building automation and control systems (BACS) \x97 Part 4: Control applications | |
| Tracked Changes (Redline) - Building automation and control systems (BACS) Part 5: Data communication protocol | |
| Tracked Changes (Redline) - Building automation and control systems (BACS) Part 6: Data communication conformance testing | |
| Tracked Changes (Redline) - Clinical laboratory testing and in vitro diagnostic test systems - Broth microdilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi... | |
| Tracked Changes (Redline) - Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions | |
| Tracked Changes (Redline) - Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines and requirements for conducting pilot-scale evaluation of corrosion... | |
| Tracked Changes (Redline) - Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes... | |
| Tracked Changes (Redline) - Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of... | |
| Tracked Changes (Redline) - Corrosion protection of steel structures by protective paint systems \x97 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x97 Part 1:... | |
| Tracked Changes (Redline) - Corrosion protection of steel structures by protective paint systems \x97 Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating \x97 Part 2:... | |
| Tracked Changes (Redline) - Cosmetics - Microbiology - Enumeration of yeast and mould | |
| Tracked Changes (Redline) - Dentistry - Oral care products - Manual interdental brushes | |
| Tracked Changes (Redline) - Dentistry - Oral care products - Oral rinses | |
| Tracked Changes (Redline) - Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 Part 1: Test suite structure and test purposes | |
| Tracked Changes (Redline) - Electronic fee collection \x96 Evaluation of equipment for conformity to ISO 17575-1 Part 1: Test suite structure and test purposes | |
| Tracked Changes (Redline) - Electronic fee collection \x96 Evaluation of equipment for conformity to ISO 17575-1 Part 2: Abstract test suite | |
| Tracked Changes (Redline) - Electronic fee collection \x96 Evaluation of equipment for conformity to ISO 17575-3 Part 2: Abstract test suite | |
| Tracked Changes (Redline) - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions | |
| Tracked Changes (Redline) - Flame arresters - Performance requirements, test methods and limits for use | |
| Tracked Changes (Redline) - Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content Part 2: Cereals,... | |
| Tracked Changes (Redline) - Footwear - Critical substances potentially present in footwear and footwear components - Determination of dimethyl fumarat (DMFU) | |
| Tracked Changes (Redline) - Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials | |
| Tracked Changes (Redline) - Footwear \x97 Critical substances potentially present in footwear and footwear components \x97 Determination of organotin compounds in footwear materials | |
| Tracked Changes (Redline) - Footwear \x97 Critical substances potentially present in footwear and footwear components \x97 Test method to quantitatively determine dimethylformamide in footwear materials | |
| Tracked Changes (Redline) - Footwear and footwear components - Test method to assess antibacterial activity | |
| Tracked Changes (Redline) - Gas analysis - Handling of calibration gases and gas mixtures - Guidelines | |
| Tracked Changes (Redline) - Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Filtration Part 29: Linear profile filters: Wavelets | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) \x97 Filtration \x97 Part 31: Robust profile filters: Gaussian regression filters | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) \x97 Geometrical tolerancing \x97 Profile tolerancing | |
| Tracked Changes (Redline) - Industrial valves - Ball valves of thermoplastics materials | |
| Tracked Changes (Redline) - Industrial valves \x97 Butterfly valves of thermoplastics materials | |
| Tracked Changes (Redline) - Industrial valves \x97 Check valves of thermoplastics materials | |
| Tracked Changes (Redline) - Industrial valves \x97 Diaphragm valves of thermoplastics materials | |
| Tracked Changes (Redline) - Instrumentation for use in association with non-active surgical implants - General requirements | |
| Tracked Changes (Redline) - Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces | |
| Tracked Changes (Redline) - Intelligent transport systems - Automatic vehicle and equipment identification - Numbering and data structures | |
| Tracked Changes (Redline) - Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography | |
| Tracked Changes (Redline) - Leather - Chemical determination of metal content Part 1: Extractable metals | |
| Tracked Changes (Redline) - Leather - Chemical determination of metal content Part 2: Total metal content | |
| Tracked Changes (Redline) - Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenolisom ers and pentachlorophenol content | |
| Tracked Changes (Redline) - Leather - Chemical tests for the determination of certain azo colorants in dyed leathers Part 1: Determination of certain aromatic amines derived from azo colorants | |
| Tracked Changes (Redline) - Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings | |
| Tracked Changes (Redline) - Leather - Physical and mechanical tests - Determination of extension set | |
| Tracked Changes (Redline) - Leather - Physical and mechanical tests - Determination of heat resistance of patent leather | |
| Tracked Changes (Redline) - Leather - Physical and mechanical tests - Determination of softness | |
| Tracked Changes (Redline) - Leather \x96 Identification of leather with microscopy | |
| Tracked Changes (Redline) - Machine tools \x97 Safety \x97 Stationary grinding machines | |
| Tracked Changes (Redline) - Machine tools safety - Machining centres, milling machines, transfer machines - Part 1: Safety requirements | |
| Tracked Changes (Redline) - Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems | |
| Tracked Changes (Redline) - Molecular biomarker analysis - DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Tracked Changes (Redline) - Non- Destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing of discontinuities | |
| Tracked Changes (Redline) - Non-alloy steel wire rod for conversion to wire Part 1: General requirements | |
| Tracked Changes (Redline) - Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general purpose wire rod | |
| Tracked Changes (Redline) - Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications | |
| Tracked Changes (Redline) - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage Part 3: Spectrometric method | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic equipment for the determination of thickness | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic testing - General principles | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic testing - Sensitivity and range setting | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic testing - Testing for discontinuities perpendicular to the surface | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic testing - Through-transmission technique | |
| Tracked Changes (Redline) - Non-destructive testing - Ultrasonic thickness determination | |
| Tracked Changes (Redline) - Non-destructive testing \x97 Ultrasonic testing \x97 Characterization and sizing of discontinuities | |
| Tracked Changes (Redline) - Non-destructive testing \x97 Ultrasonic testing \x97 Specification for step wedge calibration block | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy - Internal coating and lining of steel storage tanks | |
| Tracked Changes (Redline) - Ophthalmic implants - Irrigating solutions for ophthalmic surgery | |
| Tracked Changes (Redline) - Ophthalmic implants \x97 Ocular endotamponades | |
| Tracked Changes (Redline) - Packaging \x97 Transport packaging for dangerous goods \x97 Test methods | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting | |
| Tracked Changes (Redline) - Petroleum, petrochemical and natural gas industries \x96 Shell-and-tube heat exchangers | |
| Tracked Changes (Redline) - Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test | |
| Tracked Changes (Redline) - Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles | |
| Tracked Changes (Redline) - Plastics - Liquid resins - Determination of density by the pycnometer method | |
| Tracked Changes (Redline) - Plastics - Polyamide (PA) moulding and extrusion materials Part 1: Designation system, marking of products and basis for specifications | |
| Tracked Changes (Redline) - Plastics - Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels \x97 Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing \x97 Part 4: Valves | |
| Tracked Changes (Redline) - Radiological protection - Monitoring and internal dosimetry for specific materials - Part 2: Ingestion of uranium compounds | |
| Tracked Changes (Redline) - Radiological protection - Performance criteria for laboratories using the cytokinesis-block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry | |
| Tracked Changes (Redline) - Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) | |
| Tracked Changes (Redline) - Respiratory protective devices \x96 Vocabulary and graphical symbols | |
| Tracked Changes (Redline) - Small craft \x96 Navigation lights \x96 Installation, placement and visibility | |
| Tracked Changes (Redline) - Soil quality - Effects of contaminants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction | |
| Tracked Changes (Redline) - Soil quality - Guidance on the establishment and maintenance of monitoring programmes | |
| Tracked Changes (Redline) - Solid biofuels - Conversion of analytical results from one basis to another | |
| Tracked Changes (Redline) - Solid biofuels - Determination of total content of sulfur and chlorine | |
| Tracked Changes (Redline) - Solid biofuels - Vocabulary | |
| Tracked Changes (Redline) - Solid biofuels \x97 Fuel specifications and classes \x97 Part 1: General requirements | |
| Tracked Changes (Redline) - Solid biofuels \x97 Fuel specifications and classes \x97 Part 7: Graded non-woody briquettes | |
| Tracked Changes (Redline) - Solid biofuels \x97 Fuel specifications and classes \x97 Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use | |
| Tracked Changes (Redline) - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 | |
| Tracked Changes (Redline) - Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification | |
| Tracked Changes (Redline) Implants for surgery \x96 Minimum data sets for surgical implants | |
| Tracked Changes (Redline) Solid biofuels \x97 Fuel specifications and classes \x97 Part 2: Graded wood pellets | |
| Translation Services - Requirements for translation services | |
| Water quality - Analysis of microplastic in water Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water | |
| Water quality - Detection and enumeration of Pseudomonas aeruginosa - Method by membrane filtration | |
| Water quality - Determination of six complexing agents - Gas-chromatographic method | |
| Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection | |
| Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) | |
| Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna | |
| Water quality \x97 Detection and enumeration of Pseudomonas aeruginosa Part 2: Most probable number method | |
| Water quality Determination of acute toxicity of marine or estuarine sediment to amphipods | |
| Welding - Micro joining of 2nd generation high temperature superconductors Part 1: General requirements for the procedure | |
| Welding - Micro joining of second generation high temperature superconductors Part 3: Test methods for joints | |
| Welding \x96 Micro joining of 2nd generation high temperature superconductors Part 2: Qualification for welding and testing personnel | |
| Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification | |
| Wheat flour and durum wheat semolina \x96 Determination of colour by diffuse reflectance colorimetry |
| << Prev | Next >> |