Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
260
270
280
290
300
310
314
315
316
317
318
319
320
321
322
323
324
325
326
330
340
350
360
370
380
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Noise Test Code for Fastener Driving Tools - Engineering Method | |
| Adhesives - Determination of Ash and Sulfated Ash | |
| Adhesives - Determination of Free Formaldehyde in Amino and Amidoformaldehyde Condensates | |
| Adhesives - Determination of Isocyanate Content | |
| Adhesives - Determination of pH - Test Method | |
| Adhesives - Determination of the Colour and/or Colour Changes of Adhesive Coats Under the Influence of Light | |
| Aggregates for concrete | |
| Agricultural Machinery - Front Loaders - Safety | |
| Aluminium and Aluminium Alloys - Reroll Stock for General Applications - Part 1: Specifications for Hot Rolled Reroll Stock | |
| Aluminium and Aluminium Alloys - Reroll Stock for General Applications - Part 2: Specifications for Cold Rolled Reroll Stock | |
| Animal Tissues and Their Derivatives Utilized in the Manufacture of Medical Devices - Part 1: Analysis and Management of Risk | |
| Animal Tissues and Their Derivatives Utilized in the Manufacture of Medical Devices - Part 2: Controls on Sourcing, Collection and Handling | |
| Animal Tissues and Their Derivatives Utilized in the Manufacture of Medical Devices - Part 3: Validation of the Elimination and/or Inactivation of Viruses and Transmissible Agents | |
| Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points | |
| Artificial Climbing Structures - Protection Points, Stability Requirements and Test Methods | |
| Artificial climbing structures Part 2: Safety requirements and test methods for bouldering walls | |
| Artificial climbing structures Part 3: Safety requirements and test methods for climbing holds | |
| Biotechnology - Large-Scale Process and Production - Guidance for the Handling, Inactivating and Testing of Waste | |
| Biotechnology - Large-Scale Process and Production - Guidance on Equipment Selection and Installation in Accordance with the Biological Risk | |
| Biotechnology - Modified Organisms for Application in the Environment - Guidance for the Monitoring Strategies for Deliberate Releases of Genetically Modified Plants | |
| Biotechnology - Performance Criteria for Microbiological Safety Cabinets | |
| Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary | |
| Bitumen and bituminous binders - Determination of kinematic viscosity | |
| Bitumen and bituminous binders - Determination of the Fraass breaking point | |
| Bitumen and Bituminous Binders - Specifications for Paving Grade Bitumens | |
| Bitumen and Bituminous Binders - Terminology | |
| Bitumen and bituminous binders \x97 Determination of solubility | |
| Bitumen and bituminous binders \x97 Determination of the paraffin wax content \x97 Part 1: Method by distillation | |
| Bitumen and bituminous binders \x97 Determination of the resistance to hardening under the influence of heat and air Part 2: TFOT Method | |
| Bitumen and bituminous binders \x97 Determination of the resistance to hardening under the influence of heat and air Part 3: RFT Method | |
| Bitumen and bituminous binders \x97 Preparation of test samples | |
| Building Materials and Products - Hygrothermal Properties - Tabulated Design Values | |
| Castors and Wheels - Castors and Wheels for Applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) | |
| Castors and Wheels - Castors and Wheels for Applications up to 1,1 m/s (4 km/h) | |
| Castors and Wheels - Castors and Wheels for Manually Propelled Institutional Applications | |
| Castors and Wheels - Castors for Furniture - Castors for Swivel Chairs - Requirements | |
| Castors and Wheels - Castors for Furniture - Requirements | |
| Castors and Wheels - Hospital Bed Castors | |
| Castors and Wheels - Test Methods and Apparatus | |
| Castors and Wheels - Vocabulary, Recommended Symbols and Multilingual Dictionary | |
| Cathodic Protection for Fixed Steel Offshore Structures | |
| Cathodic Protection of Submarine Pipelines | |
| Centrifuges - Common Safety Requirements | |
| Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of... | |
| Characterisation of waste Leaching Compliance test for leaching of granular waste materials and sludges Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for... | |
| Characterisation of waste Leaching Compliance test for leaching of granular waste materials and sludges Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and... | |
| Characterisation of waste Leaching Compliance test for leaching of granular waste materials and sludges Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for... | |
| Characterization of waste Analysis of eluates Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr VI, Cu, Mo, Ni, No2 -, Pb, total S, So4 2-, V and Zn... | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Calcium Carbonate, High-Calcium Lime and Half-Burnt Dolomite - Test Methods | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - Chlorine Dioxide | |
| Chemicals Used for Treatment of Water Intended for Human Consumption - High-Calcium Lime | |
| Child Care Articles - Soother Holder - Safety Requirements and Test Methods | |
| Child use and care articles - Soother holder - Safety requirements and test methods | |
| Chimneys Components Concrete outer wall elements | |
| Classification of Dense Shaped Refractory Products - Part 1: Alumina-Silica Products | |
| Classification of Dense Shaped Refractory Products - Part 2: Basic Products Containing Less Than 7% Residual Carbon | |
| Classification of Dense Shaped Refractory Products - Part 3: Basic Products Containing from 7% to 30% Residual Carbon | |
| Classification of Dense Shaped Refractory Products - Part 4: Special Products | |
| Clinical Thermometers - Part 1: Metallic Liquid-In-Glass Thermometers with Maximum Device | |
| Clinical Thermometers - Part 2: Phase Change Type (Dot Matrix) Thermometers | |
| Clinical Thermometers - Part 3: Performance of Compact Electrical Thermometers (Non-Predictive and Predictive) with Maximum Device | |
| Clinical Thermometers - Part 4: Performance of Electrical Thermometers for Continuous Measurement | |
| Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) | |
| Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements | |
| Coating plants Machinery for dip coating and electrodeposition of organic liquid coating material Safety requirements | |
| Components for supply systems for consuming units with liquid fuels | |
| Concrete compactors and smoothing machines - Safety | |
| Copper and Copper Alloys - Forgings | |
| Copper and Copper Alloys - Plumbing Fittings - Part 1: Fittings with Ends for Capillary Soldering or Capillary Brazing to Copper Tubes | |
| Copper and Copper Alloys - Plumbing Fittings - Part 2: Fittings with Compression Ends for Use with Copper Tubes | |
| Copper and Copper Alloys - Plumbing Fittings - Part 3: Fittings with Compression Ends for Use with Plastics Pipes | |
| Copper and Copper Alloys - Plumbing Fittings - Part 4: Fittings Combining Other End Connections with Capillary or Compression Ends | |
| Copper and copper alloys - Plumbing fittings Part 20: Definitions, thread dimensions, test methods, reference data and supporting information | |
| Copper and copper alloys - Plumbing fittings Part 6: Fittings with push-fit ends | |
| Copper and copper alloys - Plumbing fittings Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes | |
| Copper and copper alloys - Plumbing fittings Part 7: Press fittings for use with metallic tubes | |
| Copper and copper alloys - Plumbing fittings Part 8: Fittings with press ends for use with plastics and multilayer pipes | |
| Copper and copper alloys - Plumbing fittings Part 8: Press fittings for use with plastics and multilayer pipes | |
| Copper and Copper Alloys - Rolled, Finned, Seamless Tubes for Heat Exchangers | |
| Copper and Copper Alloys - Seamless, Round Copper Capillary Tubes | |
| Copper and Copper Alloys - Seamless, Round Tubes for General Purposes | |
| Copper and Copper Alloys - Seamless, Round Tubes for Heat Exchangers | |
| Copper and copper alloys \x97 Plumbing fittings Part 3: Compression fittings for use with plastics and multilayer pipes | |
| Copper and copper alloys \x97 Seamless, round tubes for general purposes | |
| Corr. 1 Copper and Copper Alloys - Plumbing Fittings - Part 5: Fittings with Short Ends for Capillary Brazing to Copper Tubes | |
| Corrosion Protection of Metals - Electrodeposited Coatings of Nickel, Nickel Plus Chromium, Copper Plus Nickel and Copper Plus Nickel Plus Chromium | |
| Corrosion Protection of Metals - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys | |
| Corrosion Protection of Metals and Alloys - Surface Treatment, Metallic and Other Inorganic Coatings - Vocabulary | |
| Cranes - Information for Use and Testing - Part 1: Instructions | |
| Cranes - Information for Use and Testing - Part 2: Marking | |
| Cryogenic Vessel - Materials - Part 1: Toughness Requirements for Temperatures Below -80 Degrees C | |
| Cryogenic Vessels - Cryogenic Flexible Hoses | |
| Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 Degrees C and -20 Degrees C | |
| Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1 000 Litres Volume - Part 1: Fundamental Requirements | |
| Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1 000 Litres Volume - Part 2: Design, Fabrication, Inspection and Testing | |
| Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1 000 Litres Volume - Part 3: Operational Requirements | |
| Direct Gas-Fired Hot Air Blowers for Use in Greenhouses and Supplementary Non-Domestic Space Heating | |
| Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods | |
| Durability of Wood and Wood-Based Products - Preservative-Treated Solid Wood - Determination of the Penetration and Retention of Creosote in Treated Wood | |
| Earth-Moving Machinery - Rubber-Tyred Machines - Steering Requirements | |
| External Limb Prostheses and External Orthoses - Requirements and Test Methods | |
| Fibre Ropes for General Service - Hemp | |
| Fibre-cement flat sheets - Product specification and test methods | |
| Fibre-Cement Flat Sheets - Product Specifications and Test Methods | |
| Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices | |
| Flame Supervision Devices for Gas-Burning Appliances - Thermo- Electric Types | |
| Flanges and Their Joints - Gaskets for Class-Designated Flanges - Part 1: Non-Metallic Flat Gaskets with or without Inserts | |
| Flanges and Their Joints - Gaskets for Class-Designated Flanges - Part 3: Non-Metallic PTFE Envelope Gaskets | |
| Flanges and Their Joints - Gaskets for Class-Designated Flanges - Part 4: Corrugated, Flat or Grooved Metallic and Filled Metallic Gaskets for Use with Steel Flanges | |
| Flanges and Their Joints - Gaskets for Class-Designated Flanges - Part 5: Metallic Ring Joint Gaskets for Use with Steel Flanges | |
| Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges | |
| Flanges and their joints \x97 Dimensions of gaskets for Class-designated flanges \x97 Part 1: Non-metallic flat gaskets with or without inserts | |
| Flanges and their joints Gaskets for class-designated flanges Part 6: Covered serrated metal gaskets for use with steel flanges | |
| Floor Heating - Systems and Components - Part 4: Installation | |
| Floor Heating - Systems and Components Part 1: Definitions and Symbols | |
| Floor Heating - Systems and Components Part 2: Determination of the Thermal Output | |
| Floor Heating - Systems and Components Part 3: Dimensioning | |
| Food Processing Machinery - Centrifugal Machines for Processing Edible Oils and Fats - Safety and Hygiene Requirements | |
| Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements | |
| Food processing machinery Filling machines and auxiliary machines Safety and hygiene requirements | |
| Foot and Leg Protectors - Requirements and Test Methods for Toecaps and Metal Penetration Resistant Inserts | |
| Footwear, Leather and Imitation Leather Goods Manufacturing Machines - Noise Test Code - Common Requirements | |
| Footwear, Leather and Imitation Leather Manufacturing Machines - Nailing Machines - Safety Requirements | |
| Founding - Abrasion Resistant Cast Irons | |
| Founding - Visual Examination of Surface Discontinuities - Steel Sand Castings | |
| Foundry Machinery - Safety Requirements for Abrasive Blasting Equipment | |
| Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines | |
| Foundry machinery Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines | |
| Fruit and Vegetable Juices - Determination of Glucose, Fructose, Sorbitol and Sucrose Contents - Method Using High-Performance Liquid Chromatography | |
| Fruit and Vegetable Juices - Enzymatic Determination of Acetic Acid (Acetate) Content - NAD Spectrometric Method | |
| Fruit and Vegetable Juices - Enzymatic Determination of D- and L-Lactic Acid (Lactate) Content - NAD Spectrometric Method | |
| Furniture - Strength, durability and safety - Requirements for domestic seating | |
| Furniture - Strength, durability and safety - Requirements for domestic tables | |
| Furniture Removal Activities - Furniture Removal for Private Individuals - Part 1: Service Specification | |
| Furniture Removal Activities - Furniture Removal for Private Individuals - Part 2: Provision of Service | |
| Furniture removal activities - Furniture removal for private individuals - Service specification | |
| Galvanic anodes for cathodic protection in seawater and saline mud | |
| Gas Infrastructure - Compressor stations - Functional requirements | |
| Gas Meters - Rotary Displacement Gas Meters | |
| Gas Supply Systems - Compressor Stations - Functional Requirements | |
| Gas Welding Equipment - Specification for Hose Assemblies for Equipment for Welding, Cutting and Allied Processes | |
| General Principles of Cathodic Protection in Sea Water | |
| Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Hydrolysis in Water | |
| Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing | |
| Glass in building - Pendulum test - Impact test method and classification for flat glass | |
| Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data | |
| Glass Plant, Pipeline and Fittings - Pipeline and Fittings DN 15 to 1 000 - Compatibility and Interchangeability | |
| Gullies for Buildings - Part 1: Requirements | |
| Gullies for Buildings - Part 2: Test Methods | |
| Gullies for Buildings - Part 3: Quality Control | |
| Gullies for Buildings - Part 4: Access Covers | |
| Gullies for buildings Part 5: Gullies with light liquids closure | |
| Gullies for buildings Part 6: Trapped floor gullies with a depth of water seal less than 50 mm | |
| Gullies for buildings Part 7: Trapped floor gullies with mechanical closure | |
| Gullies for buildings Part 8: Trapped floor gullies with combined mechanical closure and water seal | |
| Gullies for buildings. Test methods | |
| Gully tops and manhole tops for vehicular and pedestrian areas Part 2: Gully tops and manhole tops made of cast iron | |
| Gully tops and manhole tops for vehicular and pedestrian areas Part 3: Gully tops and manhole tops made of steel or aluminium alloys | |
| Gully tops and manhole tops for vehicular and pedestrian areas Part 4: Gully tops and manhole tops made of steel reinforced concrete | |
| Gully tops and manhole tops for vehicular and pedestrian areas Part 5: Gully tops and manhole tops made of composite materials | |
| Gully tops and manhole tops for vehicular and pedestrian areas Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) | |
| Gymnastic Equipment - Balancing Beams - Functional and Safety Requirements, Test Methods | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Adjusters Used with Magnetic Oxide (Ferrite) Cores for Use in Inductors and Tuned Transformers | |
| Harmonized System of Quality Assessment for Electronic Components Generic Specification: Cores Made of Ferrite Materials | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification Magnetic Oxide Ring Cores for Interface Suppression and Low Level Signal Transformer Applications | |
| Harmonized system of quality assessment for electronic components Sectional specification: Adjusters used with magnetic oxide cores for use in inductors and tuned transformers | |
| Harmonized system of quality assessment for electronic components Sectional specification: Magnetic oxide cores for inductor applications | |
| Harmonized system of quality assessment for electronic components Sectional specification: Magnetic oxide cores for linear transformers | |
| Health informatics - Expression of results of measurements in health sciences | |
| Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate | |
| Imperfections in Oxyfuel Flame Cuts, Laser Beam Cuts and Plasma Cuts - Terminology | |
| Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases | |
| Industrial Valves - Butt Welding Ends for Steel Valves | |
| Industrial Valves - Isolating Valves for LNG - Specification for Suitability and Appropriate Verification Tests | |
| Industrial Valves - Method for Sizing the Operating Element | |
| Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | |
| Industrial valves - Shell design strength Part 1: Tabulation method for steel valve shells | |
| Industrial valves - Shell design strength Part 2: Calculation method for steel valve shells | |
| Industrial valves - Shell design strength Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | |
| Industrial Valves - Valves For Chemical and Petrochemical Process Industry - Requirements and Tests | |
| Industrial valves Shell design strength Part 2: Calculation method for steel valve shells | |
| Industrial, Commercial and Garage Doors and Gates - Air Permeability - Classification | |
| Industrial, Commercial and Garage Doors and Gates - Air Permeability - Test Method | |
| Industrial, Commercial and Garage Doors and Gates - Mechanical Aspects - Requirements | |
| Industrial, Commercial and Garage Doors and Gates - Mechanical Aspects - Test Methods | |
| Industrial, Commercial and Garage Doors and Gates - Resistance to Water Penetration - Classification | |
| Industrial, Commercial and Garage Doors and Gates - Resistance to Water Penetration - Test Method | |
| Industrial, Commercial and Garage Doors and Gates - Resistance to Wind Load - Classification | |
| Industrial, Commercial and Garage Doors and Gates - Resistance to Wind Load - Testing and Calculation | |
| Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods | |
| Industrial, Commercial and Garage Doors and Gates - Safety in Use of Power Operated Doors - Requirements | |
| Industrial, Commercial and Garage Doors and Gates - Safety in Use of Power Operated Doors - Test Methods | |
| Industrial, Commercial and Garage Doors and Gates - Terminology - Part 1: Types of Doors | |
| Industrial, Commercial and Garage Doors and Gates - Terminology - Part 2: Parts of Doors | |
| Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation | |
| Industrial, commercial and garage doors and gates \x97 Mechanical aspects \x97 Requirements and test methods | |
| Industrial, commercial and garage doors and gates \x97Installation and use | |
| Industrial, commercial and garage doors and gates Installation and use | |
| Inland Navigation Vessels - Swing Derricks | |
| Installations for Oil Supply Systems for Oil Burners - Part 1: Saftey Requirements and Tests - Parts, Oil Feed Pumps, Control and Safety Devices, Supply Tanks | |
| Installations for Oil Supply Systems for Oil Burners - Part 2: Saftey Requirements and Tests - Parts, Valves, Pipes, Filters, Oil De-Aerators, Meters | |
| Internal cathodic protection of metallic structures | |
| Irrigation Techniques - Automatic Turf Irrigation Systems - Part 1: Definition of the Programme of Equipment by the Owner | |
| Irrigation Techniques - Automatic Turf Irrigation Systems - Part 2: Design and Definition of Typical Technical Templates | |
| Irrigation Techniques - Automatic Turf Irrigation Systems - Part 3: Automatic Control and System Management | |
| Irrigation techniques Automatic turf irrigation systems Part 4: Installation and Acceptance | |
| Irrigation techniques Automatic turf irrigation systems Part 5: Testing methods of systems | |
| Lead and Alloys - Lead Alloy Ingots for Electric Cable Sheathing and For Sleeves | |
| Lead and Lead Alloys - Lead | |
| Lead and Lead Alloys - Rolled Lead Sheet for Building Purposes | |
| Light and lighting - Lighting of work places - Part 1: Indoor work places | |
| Light and Lighting Basic Terms and Criteria for Specifying Lighting Requirements | |
| Lighting of work places - Part 2: Outdoor work places | |
| Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters | |
| Liquid petroleum products - Determination of total contamination Part 1: Middle distillates and diesel fuels | |
| Liquid petroleum products \x97 Determination of total contamination Part 2: Fatty acid methyl esters | |
| Liquid Pumps - Pump Units with Frequency Inverters - Guarantee and Compatibility Tests | |
| Liquid Pumps and Pump Units - Noise Test Code - Grade 2 and Grade 3 of Accuracy | |
| LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture | |
| LPG equipment and accessories \x97 Welded steel pressure vessels for LPG road tankers \x97 Design and manufacture | |
| Machinery for the supply and circulation of coating materials under pressure - Safety requirements | |
| Machinery for the supply and circulation of coating materials under pressure Safety requirements | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines | |
| Machines for the Manufacture of Constructional Products from Concrete and Calcium-Silicate - Safety - Part 4: Concrete and Tile Making Machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 3: Slide and turntable machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 5-1: Pipe making machines manufacturing in the vertical axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 5-2: Pipe making machines manufacturing in the horizontal axis | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 5-3: Pipe prestressing machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 5-4: Concrete pipe coating machines | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | |
| Machines for the manufacture of constructional products from concrete and calcium-silicate Safety Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | |
| Machines for the Manufacture of Costructional Products from Concrete and Calcium-Silicate - Safety - Part 1: Common Requirements | |
| Magnesium and Magnesium Alloys - Magnesium Alloys for Cast Anodes | |
| Magnesium and Magnesium Alloys - Unalloyed Magnesium | |
| Masonry and Stone Cutting-Off Machines for Job Site - Safety | |
| Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 1: Specification for Vacuum Ware, Insulated Flasks and Jugs | |
| Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 2: Specification for Insulated Bags and Boxes | |
| Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 3: Specification for Thermal Packs | |
| Materials and Articles in Contact with Foodstuffs - Transport Units for Catering Containers Containing Prepared Foodstuffs - Thermal and Hygienic Requirements and Testing | |
| Method for the Simulation of Wear and Corrosion for the Detection of Nickel Release from Coated Items | |
| Methods of test for petroleum and its products \x96 BS 2000-460.1: Bitumen and bituminous binders \x96 Determination of the resistance to hardening under the influence of heat and air \x96... | |
| Mountaineering Equipment - Helmets for Mountaineers - Safety Requirements and Test Methods | |
| Multifunctional Controls for Gas Burning Appliances | |
| Natural Stone - Denomination Criteria | |
| Natural Stone - Terminology | |
| Noise Test Code for Foundry Machines and Equipment | |
| Non-Active Surgical Implants - Joint Replacement Implants - Specific Requirements for Hip Joint Replacement Implants | |
| Non-active surgical implants - Joint replacement implants - Specific requirements for knee joint replacement implants | |
| Non-Destructive Examination of Welds - Radiographic Examination of Welded Joints - Acceptance Levels | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method | |
| Non-Destructive Testing - Characteristics of Focal Spots in Industrial X-Ray Systems for Use in Non-Destructive Testing - Part 2: Pinhole Camera Radiographic Method | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method | |
| Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro... | |
| Non-Destructive Testing - Characterization and Verification of Ultrasonic Examination Equipment - Part 2: Probes | |
| Non-Destructive Testing - Characterization and Verification of Ultrasonic Examination Equipment - Part 3: Combined Equipment | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method | |
| Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method | |
| Non-destructive testing of welds Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography Acceptance levels | |
| Non-destructive testing of welds Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels | |
| Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments | |
| Oxygen monitors for patient breathing mixtures - Particular requirements | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract | |
| Paper and board \x97 Paper and board intended to come into contact with foodstuffs \x97 Determination of mercury in an aqueous extract | |
| Paragliding Equipment - Emergency Parachutes - Safety Requirements and Test Methods | |
| Phosphate Conversion Coatings of Metals - Method of Specifying Requirements | |
| Plastic Warning Devices for Underground Cables and Pipelines with Visual Characteristics | |
| Plastics - Fibre Reinforced Composites - Preparation of Compression Moulded Test Plates of SMC, BMC and DMC | |
| Plastics - Thermoset Moulding Compounds - Determination of the Degree of Fibre Wet Out in SMC | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system | |
| Polypropylene Twines | |
| Prefabricated reinforced components of autoclaved aerated concrete | |
| Pressure Gauges - Apparatus for Inspection of Pressure and/or Inflation of Tyres for Motor Vehicles - Metrology, Requirements and Testing | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Adhesion Concrete to Concrete | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Slant Shear Strength | |
| Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Part 4: Determination of Shrinkage and Expansion | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Compatibility of injection products \x97 Part 1: Compatibility with concrete | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Compatibility of injection products \x97 Part 3: Effect of injection products on elastomers | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Part 1: Adhesion and elongation capacity of injection products with limited ductility | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Part 2: Determination of the adhesion of injection products, with or without thermal cycling \x97... | |
| Products and systems for the protection and repair of concrete structures \x97 Test methods \x97 Part 3: Determination of early age linear shrinkage for structural bonding agents | |
| Products and systems for the protection and repair of concrete structures Test methods Part 3: Determination of the adhesion of injection products, with or without thermal cycling Slant shear method... | |
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments | |
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General | |
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials | |
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| Protection of metallic materials against corrosion \x97 Guidance on the assessment of corrosion likelihood in water distribution and storage systems \x97 Part 2: Influencing factors for copper and copper alloys... | |
| Protection of metallic materials against corrosion \x97 Guidance on the assessment of corrosion likelihood in water distribution and storage systems \x97 Part 3: Influencing factors for hot dip galvanised ferrous... | |
| Protection of metallic materials against corrosion \x97 Guidance on the assessment of corrosion likelihood in water distribution and storage systems \x97 Part 4: Influencing factors for stainless steels | |
| Protection of metallic materials against corrosion \x97 Guidance on the assessment of corrosion likelihood in water distribution and storage systems \x97 Part 5: Influencing factors for cast iron, unalloyed and... | |
| Protective Gloves for Welders | |
| Railway applications - Structural requirements of railway vehicle bodies Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) | |
| Railway applications - Structural requirements of railway vehicle bodies Part 2: Freight wagons | |
| Railway Applications - Structural Requirements of Railway Vehicle Bodies | |
| Railway Applications - Tank Wagons - Part 1: Marking of Tank Wagons for the Carriage of Dangerous Goods | |
| Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return | |
| Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure | |
| Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products | |
| Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products | |
| Railway applications - Tank wagons - Part 6: Manholes | |
| Railway applications Tank wagons Part 7: Platforms and ladders | |
| Railway applications Tank wagons Part 8: Heating connections | |
| Reciprocating Internal Combustion Engine Driven Generating Sets - Safety | |
| Resilient Floor Coverings - Specification for Corkment Underlay | |
| Resilient Floor Coverings - Vocabulary | |
| Respiratory Protective Devices - Light Duty Construction Compressed Air Line Breathing Apparatus Incorporating a Full Face Mask, Half Mask or Quarter Mask - Requirements, Testing, Marking | |
| Safety Nets - Part 2: Safety Requirements for the Erection of Safety Nets | |
| Safety Nets Part 1: Safety Requirements, Test Methods | |
| Safety of Machine Tools - Hydraulic Press Brakes | |
| Safety of Machine Tools - Large Numerically Controlled Turning Machines and Turning Centres | |
| Safety of Machinery - Laser Processing Machines - Safety Requirements | |
| Safety of machinery - Noise test code for foundry machines and equipment | |
| Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 | |
| Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements | |
| Securing of Cargo on Road Vehicles - Lashing Points on Commercial Vehicles for Goods Transportation - Minimum Requirements and Testing | |
| Self Adhesive Tapes - Terminology | |
| Sisal Twines | |
| Small Wastewater Treatment Systems for Up to 50 PT - Part 1: Prefabricated Septic Tanks | |
| Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants | |
| Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits | |
| Small wastewater treatment systems for up to 50 PT Part 3: Packaged and/or site assembled domestic wastewater treatment plants | |
| Small wastewater treatment systems for up to 50 PT Part 6: Prefabricated treatment units for septic tank effluent | |
| Small wastewater treatment systems for up to 50 PT Part 7: Prefabricated tertiary treatment units | |
| Soil Improvers and Growing Media - Determination of a Quantity | |
| Soil Improvers and Growing Media - Sampling | |
| Sports Mats - Part 1: Gymnastic Mats, Safety Requirements | |
| Sports Mats - Part 2: Pole Vault and High Jump Mats, Safety Requirements | |
| Sports Mats - Part 3: Judo Mats, Safety Requirements | |
| Sports Mats - Part 4: Determination of Shock Absorption | |
| Sports Mats - Part 5: Determination of the Base Friction | |
| Sports Mats - Part 6: Determination of the Top Friction | |
| Sports Mats - Part 7: Determination of Static Stiffness | |
| Static Welded Cylindrical Tanks, Serially Produced for the Storage of Liquefied Petroleum Gas (LPG) Having a Volume Not Greater Than 13 m3 and for Installation Above Ground - Design and... | |
| Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method | |
| Stationary Waste Containers - Part 1: Containers with a Capacity from 1 700 1 to 5 000 1 with Flat or Dome Lid(s), for Trunnion, Double Trunnion or Pocket Lifting... | |
| Stationary Waste Containers - Part 2: Performance Requirements and Test Methods | |
| Stationary Waste Containers - Part 3: Safety and Health Requirements | |
| Sterile rectal catheters for single use | |
| Surface Active Agents - Determination of Stability in Hard Water | |
| Surface Active Agents - Determination of the pH Value of Surfactant Solutions or Dispersions | |
| Surface Active Agents - Determination of the Polyethylene Glycol Content According to Molar Mass in Non-Ionic Surface Active Agents (Ethoxylated) by HPLC/ELSD | |
| Surfaces for sports areas Determination of water infiltration rate | |
| Swap bodies - Tarpaulins - Part 1: Minimum requirements | |
| Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders | |
| Testing Concrete in Structures - Part 1: Cored Specimens - Taking, Examining and Testing in Compression | |
| Testing Concrete in Structures - Part 2: Non-Destructive Testing - Determination of Rebound Number | |
| Testing concrete in structures \x97 Part 3: Determination of pull-out force | |
| Testing concrete Part 4: Determination of ultrasonic pulse velocity | |
| Textile Glass - Yarns - Part 1: Designation | |
| Textile Glass - Yarns - Part 2: Methods of Test and General Specifications | |
| Textile Glass - Yarns - Part 3: General Requirements for General Applications | |
| Textiles - Industrial Sewing Threads Made Wholly or Partly from Synthetic Fibres | |
| Textiles - Para-Aramid Multifilament Yarns - Test Methods | |
| Thermal Insulating Products for Building Applications - Conditioning to Moisture Equilibrium under Specified Temperature and Humidity Conditions | |
| Thermal Insulating Products for Building Applications - Determination of Behaviour under Point Load | |
| Thermal Insulating Products for Building Applications - Determination of Thickness for Floating Floor Insulating Products | |
| Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Dry and Moist Products of Medium... | |
| Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal... | |
| Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content | |
| Timber Structures - Test Methods - Cylic Testing of Joints Made with Mechanical Fasteners | |
| Tissue Paper and Tissue Products - Part 3: Determination of Thickness, Bulking Thickness and Apparent Bulk Density | |
| Tissue Paper and Tissue Products - Part 4: Determination of Tensile Strength, Stretch at Break and Tensile Energy Absorption | |
| Tissue Paper and Tissue Products - Part 5: Determination of Wet Tensile Strength | |
| Tissue Paper and Tissue Products - Part 6: Determination of Grammage | |
| Tissue Paper and Tissue Products - Part 7: Determination of Optical Properties | |
| Tracked Changes (Redline) - Bitumen and bituminous binders \x97 Determination of dynamic viscosity by vacuum capillary | |
| Tracked Changes (Redline) - Bitumen and bituminous binders \x97 Determination of kinematic viscosity | |
| Tracked Changes (Redline) - Bitumen and bituminous binders \x97 Determination of the Fraass breaking point | |
| Tracked Changes (Redline) - Bitumen and bituminous binders \x97 Determination of the paraffin wax content Part 1: Method by distillation | |
| Tracked Changes (Redline) - Bitumens and bituminous binders - Preparation of test samples | |
| Tracked Changes (Redline) - Bitumens and bituminous binders \x97 Determination of the resistance to hardening under influence of heat and air \x97 Part 1: RTFOT method | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime -... | |
| Tracked Changes (Redline) - Chemicals used for treatment of water intended for human consumption \x97 Chlorine dioxide generated in situ | |
| Tracked Changes (Redline) - Child care articles \x97 Soother holder \x97 Safety requirements and test methods | |
| Tracked Changes (Redline) - Copper and copper alloys - Plumbing fittings Part 2: Compression fittings for use with copper tubes | |
| Tracked Changes (Redline) - Copper and copper alloys - Seamless, round tubes for general purposes | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Forgings | |
| Tracked Changes (Redline) - Copper and copper alloys \x97 Plumbing fittings Part 1: Capillary fittings for soldering or brazing to copper tubes | |
| Tracked Changes (Redline) - Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices | |
| Tracked Changes (Redline) - Gas Infrastructure - Compressor stations - Functional requirements | |
| Tracked Changes (Redline) - Gas meters \x96 Rotary displacement gas meters | |
| Tracked Changes (Redline) - Geotextiles and geotextile-related products \x97 Screening test method for determining the resistance to hydrolysis in water | |
| Tracked Changes (Redline) - Gullies for buildings Part 4: Access covers | |
| Tracked Changes (Redline) - Gullies for buildings Part 5: Gullies with light liquids closure | |
| Tracked Changes (Redline) - Industrial valves - Butt welding ends for steel valves | |
| Tracked Changes (Redline) - Light and lighting - Basic terms and criteria for specifying lighting requirements | |
| Tracked Changes (Redline) - Light and lighting - Lighting of work places - Part 2: Outdoor work places | |
| Tracked Changes (Redline) - Light and lighting \x97 Lighting of work places \x97 Part 1: Indoor work places | |
| Tracked Changes (Redline) - Machinery for supply and circulation of liquid coating materials \x97 Safety requirements | |
| Tracked Changes (Redline) - Magnesium and magnesium alloys - Magnesium alloys for cast anodes | |
| Tracked Changes (Redline) - Masonry and stone cutting-off machines for job site - Safety | |
| Tracked Changes (Redline) - Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods | |
| Tracked Changes (Redline) - Natural stone - Denomination criteria | |
| Tracked Changes (Redline) - Natural stone \x96 Terminology | |
| Tracked Changes (Redline) - Non-destructive testing \x97 Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing \x97 Part 2: Pinhole camera radiographic method | |
| Tracked Changes (Redline) - Paper and board \x96 Paper and board intended to come into contact with foodstuffs \x96 Determination of cadmium, chromium and lead in an aqueous extract | |
| Tracked Changes (Redline) - Safety and control devices for burners and appliances burning gaseous fuels \x97 Multifunctional controls | |
| Tracked Changes (Redline) - Securing of cargo on road vehicles \x97 Body structure of commercial vehicles \x97 Minimum requirements | |
| Tracked Changes (Redline) - Small wastewater treatment systems for up to 50 PT Part 1: Prefabricated septic tanks | |
| Tracked Changes (Redline) - Small wastewater treatment systems for up to 50 PT Part 4: Septic tanks assembled in situ from prefabricated kits | |
| Tracked Changes (Redline) - Soil improvers and growing media - Sampling | |
| Tracked Changes (Redline) - Soil improvers and growing media. Determination of a quantity | |
| Tracked Changes (Redline) - Sports mats Part 2: Pole vault and high jump mats,safety requirements | |
| Tracked Changes (Redline) - Sports mats Part 4: Determination of shock absorption | |
| Tracked Changes (Redline) - Stationary waste containers Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting... | |
| Tracked Changes (Redline) - Stationary waste containers Part 2: Performance requirements and test methods | |
| Tracked Changes (Redline) - Stationary waste containers Part 3: Safety and health requirements | |
| Tracked Changes (Redline) - Surfaces for sports areas - Test methods for the determination of vertical water infiltration and horizontal water flow rates | |
| Tracked Changes (Redline) - Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity | |
| Tracked Changes (Redline) - Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols | |
| Tracked Changes (Redline) - Water based surface embedded heating and cooling systems - Part 3: Dimensioning | |
| Tracked Changes (Redline) - Water based surface embedded heating and cooling systems - Part 4: Installation | |
| Tracked Changes (Redline) - Water based surface embedded heating and cooling systems - Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and... | |
| Tracked Changes (Redline) \x96 Artificial climbing structures Part 1: Safety requirements and test methods for ACS with protection points | |
| Tracked Changes (Redline) \x96 Artificial climbing structures Part 2: Safety requirements and test methods for bouldering walls | |
| Tracked Changes (Redline) \x96 Artificial climbing structures Part 3: Safety requirements and test methods for climbing holds | |
| Tracked Changes (Redline) \x96 Furniture \x97 Strength, durability and safety \x97 Requirements for domestic seating | |
| Tracked Changes (Redline) \x96 Furniture \x97 Strength, durability and safety \x97 Requirements for domestic tables | |
| Transportation Services - Guidance Notes on the Application of EN ISO 9002 to the Road Transport, Storage and Distribution Industies | |
| Truck mixers - Safety requirements | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods Part 4: PVC-U profiles with thermo-laminated foils | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x97 Classification, requirements and test methods Part 1: Non-coated PVC-U profiles with light coloured surfaces | |
| Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x97 Classification, requirements and test methods Part 2: PVC-U profiles covered with foils bonded with adhesives | |
| Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods | |
| Valves - Shell design strength - Part 3: Experimental method | |
| Valves - Test of Flow Resistance Using Water as a Test Fluid | |
| Ventilation for Buildings - Air Terminal Units - Aerodynamic Testing and Rating of Constant and Variable Rate Terminal Units | |
| Ventilation for Buildings - Test Procedures and Measuring Methods for Handing over Installed Ventilation and Air Conditioning Systems | |
| Water based surface embedded heating and cooling systems Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods | |
| Water based surface embedded heating and cooling systems Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output | |
| Welded Static Non-Pressurized Thermoplastic Tanks - Part 1: General Principles | |
| Welded Static Non-Pressurized Thermoplastic Tanks - Part 2: Calculation of Vertical Cylindrical Tanks | |
| Welded Static Non-Pressurized Thermoplastic Tanks - Part 3: Design and Calculation for Single Skin Rectangular Tanks | |
| Welded Static Non-Pressurized Thermoplastic Tanks - Part 4: Design and Calculation of Flanged Joints | |
| Welded Steel Tanks for Liquefied Petroleum Gas (LPG) - Road Tankers - Design and Manufacture | |
| Welding Consumables - Rods for Gas Welding of Non Alloy and Creep-Resisting Steels - Classification | |
| Welding Consumables - Tubular Cored Electrodes for Gas Shielded Metal Arc Welding of High Strength Steels - Classification | |
| Welding Consumables - Wire Electrodes, Wires, Rods and Deposits for Gas Shielded Metal Arc Welding of High Strength Steels - Classification | |
| Windows and pedestrian doors Terminology | |
| Wood Poles for Overhead Lines - Determination of Characteristic Values | |
| Wood poles for overhead lines - Durability requirements | |
| Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations | |
| Wood Poles for Overhead Lines - Strength Grading Criteria | |
| Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method | |
| Zinc and Zinc Alloys - Chemical Analysis - Part 2: Determination of Magnesium in Zinc Alloys - Flame Atomic Absorption Spectrometric Method | |
| Zinc and Zinc Alloys - Chemical Analysis - Part 3: Determination of Lead, Cadmium and Copper - Flame Atomic Absorption Spectrometric Method | |
| Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction | |
| Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method | |
| Zinc and zinc alloys \x97 Chemical analysis \x97 Part 11: Determination of silicon in zinc alloys \x97 Spectrophotometric method |
| << Prev | Next >> |