Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
358
359
360
361
362
363
364
365
366
367
368
369
370
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Analogue audio disk records and reproducing equipment | |
| Appliance couplers for household and similar general purposes Part 1: General requirements | |
| Appliance couplers for household and similar general purposes Part 2-1: Sewing machine couplers | |
| Appliance couplers for household and similar general purposes Part 2-3: Appliance couplers with a degree of protection higher than IPX0 | |
| Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for engagement | |
| Ball and socket couplings of string insulator units \x97 Dimensions | |
| Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | |
| Carbon brushes, brush holders, commutators and slip-rings \x97 Definitions and nomenclature | |
| Clevis and tongue couplings of string insulator units - Dimensions | |
| Conductors of insulated cables | |
| Connectors for electrical and electronic equipment - Tests and measurements Part 11-1: Climatic tests - Test 11a - Climatic sequence | |
| Connectors for electrical and electronic equipment - Tests and measurements Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) | |
| Connectors for electrical and electronic equipment - Tests and measurements Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method | |
| Connectors for electrical and electronic equipment - Tests and measurements Part 9-5: Endurance tests - Test 9e: Current loading, cyclic | |
| Connectors for electrical and electronic equipment - Tests and measurements Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical loa | |
| Connectors for electrical and electronic equipment - Tests and measurements Part 99-003: Endurance test schedules - Test 99c: Test schedule for balanced single-pair connectors separating (unmating) under electrical load | |
| Connectors for electrical and electronic equipment \x96 Tests and measurements Part 1: Generic specification | |
| Connectors for electrical and electronic equipment \x96 Tests and measurements Part 8-3: Static load tests (fixed connectors) \x96 Test 8c: Robustness of actuating lever | |
| Connectors for electrical and electronic equipment \x96 Tests and measurements Part 99-002: Endurance test schedules \x96 Test 99b: Test schedule for unmating under electrical load | |
| Connectors for electrical and electronic equipment \x97 Tests and measurements Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors \x97 Tests... | |
| Connectors for electrical and electronic equipment \x97 Tests and measurements Part 28-100: Signal integrity tests up to 2 000 MHz \x97 Tests 28a to 28g | |
| Conventions concerning electric circuits | |
| Coupling capacitors and capacitor dividers Part 4: DC and AC single-phase capacitor dividers | |
| Dependability management Part 1: Managing dependability | |
| Dependability management Part 3-10: Application guide \x97 Maintainability and maintenance | |
| Dependability management Part 3-14: Application guide - Supportability and support | |
| Dependability management Part 3-4: Application guide - Specification of dependability requirements | |
| Designation of phase differences by hour numbers in three-phase AC systems | |
| Dimensions and output series for rotating electrical machines Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360 | |
| Dimensions, marking and testing of carbon brushes and dimensions of brush-holders for electrical machinery | |
| Directly heated negative temperature coefficient thermistors Part 1: Generic specification | |
| Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors | |
| Edison screw lampholders | |
| Electric dishwashers for household use - Methods for measuring the performance | |
| Electric irons for household or similar use - Methods for measuring performance | |
| Electrical insulating materials - Determination of the effects of ionising radiation Part 5: Procedures for assessment of ageing in service | |
| Electrical insulating materials \x97 Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics | |
| Electrical insulating materials \x97 Thermal endurance properties Part 5: Determination of relative temperature index (RTI) of an insulating material | |
| Electrical insulating materials \x97 Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time frame method | |
| Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion | |
| Electroacoustics - Hearing aids Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices | |
| Electroacoustics - Hearing aids Part 16: Definition and verification of hearing aid features | |
| Electroacoustics - Hearing aids Part 4: Induction-loop systems for hearing aid purposes - System performance requirements | |
| Electroacoustics - Simulators of human head and ear Part 7: Head and torso simulator for the measurement of sound sources close to the ear | |
| Electroacoustics - Simulators of human head and ear Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts | |
| Electroacoustics \x97 Hearing aids Part 0: Measurement of the performance characteristics of hearing aids | |
| Electroacoustics \x97 Hearing aids Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids | |
| Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers | |
| Environmental testing Part 3-3: Supporting documentation and guidance \x96 Seismic test methods for equipment | |
| Environmental Testing Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests | |
| Environmental testing Part 3-7: Supporting documentation and guidance \x97 Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) | |
| Explosive atmospheres Part 0: Equipment \x96 General requirements | |
| Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres | |
| Explosive atmospheres Part 11: Equipment protection by intrinsic safety \x93i\x94 | |
| Explosive atmospheres Part 15: Equipment protection by type of protection "n" | |
| Explosive atmospheres Part 17: Electrical installations inspection and maintenance | |
| Explosive atmospheres Part 18: Equipment protection by encapsulation "m" | |
| Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation | |
| Explosive atmospheres Part 25: Intrinsically safe electrical systems | |
| Explosive atmospheres Part 26: Equipment with Separation Elements or combined Levels of Protection | |
| Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" | |
| Explosive atmospheres Part 45: Electrical ignition systems for internal combustion engines | |
| Explosive atmospheres Part 7: Equipment protection by increased safety "e" | |
| Explosive atmospheres. Equipment repair, overhaul and reclamation | |
| Fixed capacitors for use in electronic equipment Part 1-1: Generic blank detail specification | |
| Fixed capacitors for use in electronic equipment Part 11: Sectional specification \x97 Fixed polyethylene-terepht halate film dielectric metal foil DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 13: Sectional specification \x97 Fixed polypropylene film dielectric metal foil DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains | |
| Fixed capacitors for use in electronic equipment Part 16: Sectional specification \x97 Fixed metallized polypropylene film dielectric DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene film dielectric AC and pulse capacitors | |
| Fixed capacitors for use in electronic equipment Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 1: Generic specification | |
| Fixed capacitors for use in electronic equipment Part 20: Sectional specification \x97 Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 | |
| Fixed capacitors for use in electronic equipment Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 | |
| Fixed capacitors for use in electronic equipment Part 23: Sectional specification \x97 Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte | |
| Fixed capacitors for use in electronic equipment Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte | |
| Fixed capacitors for use in electronic equipment Part 26: Sectional specification \x96 Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | |
| Fixed capacitors for use in electronic equipment Part 2: Sectional specification - Fixed metallized polyethyleneterephth alate film dielectric DC capacitors | |
| Fixed capacitors for use in electronic equipment Part 8: Sectional specification - Fixed capacitors of ceramic dielectric, Class 1 | |
| Fixed capacitors for use in electronic equipment Part 9: Sectional specification - Fixed capacitors of ceramic dielectric, Class 2 | |
| Fixed resistors for use in electronic equipment Part 1: Generic specification | |
| Fluids for electrotechnical applications \x97 Mineral insulating oils for electrical equipment | |
| Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps | |
| High-voltage fuses Part 1: Current-limiting fuses | |
| High-voltage fuses Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators | |
| High-voltage test techniques - Charge-based measurement of partial discharges | |
| Hollow metallic waveguides Part 4: Relevant specifications for circular waveguides | |
| Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines | |
| Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements | |
| Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | |
| Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections | |
| Household and similar electrical appliances - Safety Part 2-103: Particular requirements for drives for gates, doors and windows | |
| Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets | |
| Household and similar electrical appliances - Safety Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings | |
| Household and similar electrical appliances - Safety Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators | |
| Household and similar electrical appliances - Safety Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part | |
| Household and similar electrical appliances - Safety Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources | |
| Household and similar electrical appliances - Safety Part 2-115: Particular requirements for skin beauty care appliances | |
| Household and similar electrical appliances - safety Part 2-119: Particular requirements for commercial vacuum packaging appliances | |
| Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care | |
| Household and similar electrical appliances - Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers | |
| Household and similar electrical appliances - Safety Part 2-28: Particular requirements for sewing machines | |
| Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances | |
| Household and similar electrical appliances - Safety Part 2-32: Particular requirements for massage appliances | |
| Household and similar electrical appliances - Safety Part 2-34: Particular requirements for motor-compressors | |
| Household and similar electrical appliances - Safety Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers | |
| Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps | |
| Household and similar electrical appliances - Safety Part 2-43: Particular requirements for clothes dryers and towel rails | |
| Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors | |
| Household and similar electrical appliances - Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations | |
| Household and similar electrical appliances - Safety Part 2-58: Particular requirements for commercial electric dishwashing machines | |
| Household and similar electrical appliances - Safety Part 2-59: Particular requirements for insect killers | |
| Household and similar electrical appliances - Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool spas | |
| Household and similar electrical appliances - Safety Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals | |
| Household and similar electrical appliances - Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines | |
| Household and similar electrical appliances - Safety Part 2-76: Particular requirements for electric fence energizers | |
| Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machines | |
| Household and similar electrical appliances - Safety Part 2-81: Particular requirements for foot warmers and heating mats | |
| Household and similar electrical appliances - Safety Part 2-82: Particular requirements for amusement machines and personal service machines | |
| Household and similar electrical appliances - Safety Part 2-84: Particular requirements for toilet appliances | |
| Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines | |
| Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunning equipment | |
| Household and similar electrical appliances - Safety Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor | |
| Household and similar electrical appliances - Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances | |
| Household and similar electrical appliances - Safety Part 2-90: Particular requirements for commercial microwave ovens | |
| Household and similar electrical appliances - Safety Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use | |
| Household and similar electrical appliances - Safety Part 2-96: Particular requirements for flexible sheet heating elements for room heating | |
| Household and similar electrical appliances - Safety Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment | |
| Household and similar electrical appliances - Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances | |
| Household and similar electrical appliances \x97 Safety Part 1: General requirements | |
| Household and similar electrical appliances \x97 Safety Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators | |
| Household and similar electrical appliances \x97 Safety Part 2-11: Particular requirements for tumble dryers | |
| Household and similar electrical appliances \x97 Safety Part 2-120: Particular requirements for the safety of appliances for the generation of directly inhalable aerosols | |
| Household and similar electrical appliances \x97 Safety Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens | |
| Household and similar electrical appliances \x97 Safety Part 2-29: Particular requirements for battery chargers | |
| Household and similar electrical appliances \x97 Safety Part 2-62: Particular requirements for commercial electric rinsing sinks | |
| Household and similar electrical appliances \x97 Safety Part 2-80: Particular requirements for fans | |
| Household and similar electrical appliances \x97 Safety Part 2-82: Particular requirements for amusement machines and personal service machines | |
| Household and similar electrical appliances Part 2-84: Particular requirements for toilet appliances | |
| Household electric cooking appliances Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance | |
| Household electric cooking appliances Part 1: Ranges, ovens, steam ovens and grills \x97 Methods for measuring performance | |
| Household electric cooking appliances Part 2: Hobs \x97 Methods for measuring performance | |
| Hydraulic turbines -Testing of governing systems | |
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests | |
| Impulse tests on cables and their accessories | |
| Industrial-process control valves Part 1: Control valve terminology and general considerations | |
| Industrial-process control valves Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves | |
| Industrial-process control valves Part 4: Inspection and routine testing | |
| Insulating liquids - Determination of the breakdown voltage at power frequency - Test method | |
| Insulation co-ordination Part 11: Definitions, principles and rules for HVDC system | |
| Insulation co-ordination Part 1: Definitions, principles and rules | |
| Insulation co-ordination Part 2: Application guidelines | |
| Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type | |
| Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and... | |
| Insulators for overhead lines with a nominal voltage above 1000 V Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria | |
| Laboratory resistors Part 1: Laboratory DC resistors | |
| Laboratory resistors Part 2: Laboratory AC resistors | |
| Locking devices for ball and socket couplings of string insulator units - Dimensions and tests | |
| Low voltage fuses Part 7: Supplementary Requirements for fuse-links for the protection of batteries and battery system | |
| Low-voltage fuses Part 1: General requirements | |
| Low-voltage fuses Part 3: Supplementary requirements for fuses for operation by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F... | |
| Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Luminaires Part 1: General requirements and tests | |
| Luminaires Part 2-11: Particular requirements - Aquarium luminaires | |
| Luminaires Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor) | |
| Luminaires Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications | |
| Luminaires Part 2-1: Particular requirements \x97 Fixed general purpose luminaires | |
| Luminaires Part 2-20: Particular requirements - Lighting chains | |
| Luminaires Part 2-22: Particular requirements - Luminaires for emergency lighting | |
| Luminaires Part 2-23: Particular requirements \x97 Extra-lowvoltage lighting systems for ELV light sources | |
| Luminaires Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires | |
| Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor... | |
| Magnetic materials \x97 Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet | |
| Magnetic materials Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet | |
| Magnetic materials Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet | |
| Magnetic materials Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet | |
| Magnetic materials Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester | |
| Magnetic materials Part 18: Permanent magnet (magnetically hard) materials - Methods of measurement of the magnetic properties in an open magnetic circuit using a superconducting magnet | |
| Magnetic materials Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester | |
| Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the... | |
| Magnetic materials Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit | |
| Magnetic materials Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state | |
| Magnetic materials Part 8-1: Specifications for individual materials - Permanent magnet (magnetically hard) materials | |
| Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD) | |
| Measuring relays and protection equipment - Part 1: Common requirements | |
| Measuring relays and protection equipment Part 181: Functional requirements for frequency protection | |
| Measuring relays and protection equipment Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers | |
| Measuring relays and protection equipment Part 26: Electromagnetic compatibility requirements | |
| Measuring relays and protection equipment Part 27: Product safety requirements | |
| Mechanical standardization of semiconductor devices Part 1: General rules for the preparation of outline drawings of discrete devices | |
| Mechanical structures for electrical and electronic equipment \x96 Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-110: Residential racks and cabinets for smart houses | |
| Medical electrical equipment - Dose area product meters | |
| Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators | |
| Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment | |
| Medical electrical equipment \x97 Diagnostic X-rays Part 1: Determination of quality equivalent filtration and permanent filtration | |
| Medical electrical equipment \x97 X-ray tube assemblies for medical diagnosis \x97 Focal spot dimensions and related characteristics | |
| Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment | |
| Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators | |
| Medical electrical equipment Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV | |
| Medical electrical equipment Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers | |
| Medical electrical equipment Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment | |
| Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis | |
| Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories | |
| Medical electrical equipment Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source | |
| Medical electrical equipment Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis | |
| Medical electrical equipment Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment | |
| Medical electrical equipment Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use | |
| Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment | |
| Medical electrical equipment Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment | |
| Medical electrical equipment Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis | |
| Medical electrical equipment Part 2-46: Particular requirements for the basic safety and essential performance of operating tables | |
| Medical electrical equipment Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment | |
| Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy | |
| Medical electrical equipment Part 2: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials | |
| Method of sampling insulating liquids | |
| Methods for measuring the performance of electric storage water heaters for household purposes | |
| Mineral insulating oils in electrical equipment - Supervision and maintenance guidance | |
| Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis | |
| Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| Miniature fuses Part 6: Fuse-holders for miniature fuse-links | |
| Miniature fuses Part 8: Fuse resistors with particular overcurrent protection | |
| Miniature fuses Part 9: Miniature fuse-links for special applications with partial-range breaking capacity | |
| Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases in mineral oils and other insulating liquids - Guidance | |
| Packaging of components for automatic handling Part 2: Tape packaging of components with unidirectional leads on continuous tapes | |
| Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes | |
| Packaging of components for automatic handling Part 5: Matrix trays | |
| Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes Part 2: Dimensional compatibility requirements for pin and contact-tube accessories | |
| Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes Part 4: Switched socket-outlets with or without interlock | |
| Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements | |
| Plugs, socket-outlets and couplers for industrial purposes Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) | |
| Potentiometers for use in electronic equipment Part 3: Sectional specification: Rotary precision potentiometers | |
| Potentiometers for use in electronic equipment Part 4: Sectional specification: Single-turn rotary power potentiometers | |
| Power transformers Part 11: Dry-type transformers | |
| Power transformers Part 19-1: Rules for the determination of uncertainties in the measurement of the losses on power transformers | |
| Power transformers Part 22-1: Power transformer and reactor fittings - Protective devices | |
| Power transformers Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers | |
| Power transformers Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers | |
| Power transformers Part 22-5: Power transformer and reactor fittings \x97 Electric pumps for transformers | |
| Power transformers Part 22-6: Power transformer and reactor fittings \x97 Electric fans for transformers | |
| Power transformers Part 22-7: Power transformer and reactor fittings - Accessories and fittings | |
| Power transformers Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks | |
| Power transformers Part 24: Specification of voltage regulating distribution transformers (VRDT) | |
| Power transformers Part 25: Neutral grounding resistors | |
| Primary batteries Part 1: General | |
| Primary batteries Part 2: Physical and electrical specifications | |
| Primary batteries Part 3: Watch batteries | |
| Primary batteries Part 4: Safety of lithium batteries | |
| Primary batteries Part 5: Safety of batteries with aqueous electrolyte | |
| Primary batteries Part 6: Guidance on environmental aspects | |
| Quartz crystal units of assessed quality Part 2: Guidelines for the use | |
| Quartz crystal units of assessed quality Part 4: Crystal units with thermistors | |
| Radio interference test on high-voltage insulators | |
| Railway applications - Electric equipment for rolling stock Part 3: Electrotechnical components - Rules for DC circuit-breakers | |
| Railway applications - Electric equipment for rolling stock Part 4: Electrotechnical components - Rules for AC circuit-breakers | |
| Railway applications \x97 Electric equipment for rolling stock Part 5: Electrotechnical components \x97 Rules for HV fuses | |
| Resin based reactive compounds used for electrical insulation Part 2: Methods of test | |
| Resin based reactive compounds used for electrical insulation Part 3-8: Specifications for individual materials - Resins for cable accessories | |
| Rotating electrical machines - Dimensions and output series Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 | |
| Safety in installations for electroheating and electromagnetic processing Part 12: Particular requirements for infrared electroheating | |
| Safety in installations for electroheating and electromagnetic processing Part 1: General requirements | |
| Safety in installations for electroheating and electromagnetic processing Part 4: Particular requirements for arc furnace installations | |
| Safety in installations for electroheating and electromagnetic processing Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment | |
| Safety in installations for electroheating and electromagnetic processing Part 8: Particular requirements for electroslag remelting furnaces | |
| Safety of machinery - Electrical equipment of machines Part 32: Requirements for hoisting machines | |
| Safety of machinery \x96 Electrical equipment of machines Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV... | |
| Scales and sizes for plotting frequency characteristics and polar diagrams | |
| Semiconductor converters - General requirements and line commutated converters Part 1-1: Specification of basic requirements | |
| Series capacitors for power systems Part 4: Thyristors controlled series capacitors | |
| Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance | |
| Solderless connections Part 3: Accessible insulation displacement (ID) connections \x97 General requirements, test methods and practical guidance | |
| Solderless connections Part 4: Non-accessible insulation displacement (ID) connections \x97 General requirements, test methods and practical guidance | |
| Solderless connections Part 5: Press-in connections \x97 General requirements, test methods and practical guidance | |
| Solderless connections Part 6: Insulation piercing connections - General requirements, test methods and practical guidance | |
| Solderless connections Part 7: Spring clamp connections \x97 General requirements, test methods and practical guidance | |
| Solderless connections Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance | |
| Sound system equipment Part 16: Objective rating of speech intelligibility by speech transmission index | |
| Sound system equipment Part 21: Acoustical (output-based) measurements | |
| Sound system equipment Part 22: Electrical and mechanical measurements on transducers | |
| Sound system equipment Part 23: TVs and monitors - Loudspeaker systems | |
| Sound system equipment Part 24: Headphones and earphones \x97 Active acoustic noise cancelling characteristics | |
| Sound system equipment Part 3: Amplifiers | |
| Sound system equipment Part 4: Microphones | |
| Sound system equipment Part 7: Headphones and earphones | |
| Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment | |
| Specifications for particular types of winding wires Part 0-2: General requirements - Enamelled rectangular copper wire | |
| Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminium wire | |
| Specifications for particular types of winding wires Part 0-4: General requirements \x97 Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires Part 0-8: General requirements \x97 Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | |
| Specifications for particular types of winding wires Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 | |
| Specifications for particular types of winding wires Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 | |
| Specifications for particular types of winding wires Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 | |
| Specifications for particular types of winding wires Part 27-1: Paper tape covered round copper wire | |
| Specifications for particular types of winding wires Part 27-2: Paper tape covered round aluminium wire | |
| Specifications for particular types of winding wires Part 27-3: Paper tape covered rectangular copper wire | |
| Specifications for particular types of winding wires Part 27-4: Paper tape covered rectangular aluminium wire | |
| Specifications for particular types of winding wires Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires Part 72: Polyester glass-fibre wound unvarnished and fused or resin/varnish impregnated, bare of enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200 | |
| Specifications for particular types of winding wires Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 | |
| Specifications for particular types of winding wires Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer | |
| Specifications for particular types of winding wires Part 82: Polyesterimide enamelled rectangular copper wire, class 200 | |
| Specifications for particular types of winding wires Part 84: Polyesterimide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires Part 89: Polyesterimide enamelled round aluminum wire, class 200 | |
| Specifications for particular types of winding wires Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment | |
| Surge Arresters - Part 5: Selection and Application Recommendations | |
| Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV | |
| Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities and reference of dimensions | |
| Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires | |
| Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes \x96 Electric breakdown methods | |
| Tests for electric cables under fire conditions \x97 Circuit integrity Part 1: Test method for fire with shock at a temperature of at least 830\xb0C for cables of rated voltage... | |
| Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus | |
| Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables \x97 Apparatus | |
| Tests on electric and optical fibre cables under fire conditions Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R | |
| Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | |
| Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B | |
| Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C | |
| Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D | |
| Thermocouples Part 3: Extension and compensating cables - Tolerances and identification system | |
| Tracked Changes (Redline) - Analogue audio disk records and reproducing equipment | |
| Tracked Changes (Redline) - Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers | |
| Tracked Changes (Redline) - Conductors of insulated cables | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load... | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment - Tests and measurements Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment - Tests and measurements Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories -... | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment \x96 Tests and measurements Part 1: Generic specification | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment \x96 Tests and measurements Part 8-3: Static load tests (fixed connectors) \x96 Test 8c: Robustness of actuating lever | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment \x97 Tests and measurements Part 28-100: Signal integrity tests up to 2 000 MHz \x97 Tests 28a to 28g | |
| Tracked Changes (Redline) - Conventions concerning electric circuits | |
| Tracked Changes (Redline) - Dependability management - Part 3-10: Application guide - Maintainability and maintenance | |
| Tracked Changes (Redline) - Dependability management - Part 3-14: Application guide - Supportability and support | |
| Tracked Changes (Redline) - Dependability management \x97 Part 1: Managing dependability | |
| Tracked Changes (Redline) - Dependability management \x97 Part 3-4: Application guide \x97 Specification of dependability requirements | |
| Tracked Changes (Redline) - Directly heated negative temperature coefficient thermistors - Part 1: Generic specification | |
| Tracked Changes (Redline) - Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material | |
| Tracked Changes (Redline) - Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time... | |
| Tracked Changes (Redline) - Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion | |
| Tracked Changes (Redline) - Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids | |
| Tracked Changes (Redline) - Electroacoustics - Hearing aids Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices | |
| Tracked Changes (Redline) - Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests | |
| Tracked Changes (Redline) - Environmental testing Part 3-4: Supporting documentation and guidance - Damp heat tests | |
| Tracked Changes (Redline) - Explosive atmospheres - Part 25: Intrinsically safe electrical systems | |
| Tracked Changes (Redline) - Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection | |
| Tracked Changes (Redline) - Explosive atmospheres \x97 Part 19: Equipment repair, overhaul and reclamation | |
| Tracked Changes (Redline) - Explosive atmospheres \x97 Part 31: Equipment dust ignition protection by enclosure "t" | |
| Tracked Changes (Redline) - Explosive atmospheres Part 0: Equipment \x96 General requirements | |
| Tracked Changes (Redline) - Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres | |
| Tracked Changes (Redline) - Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i" | |
| Tracked Changes (Redline) - Explosive atmospheres Part 15: Equipment protection by type of protection "n" | |
| Tracked Changes (Redline) - Explosive atmospheres Part 17: Electrical installations inspection and maintenance | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethyleneterephth alate film dielectric DC capacitors | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment \x97 Part 23: Sectional specification \x97 Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment \x97 Part 8: Sectional specification \x97 Fixed capacitors of ceramic dielectric, Class 1 | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment Part 17: Sectional specification \x96 Fixed metallized polypropylene film dielectric AC and pulse capacitors | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment Part 22: Sectional specification \x96 Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 | |
| Tracked Changes (Redline) - Fixed capacitors for use in electronic equipment Part 9: Sectional specification \x97 Fixed capacitors of ceramic dielectric, Class 2 | |
| Tracked Changes (Redline) - Fixed resistors for use in electronic equipment - Part 1: Generic specification | |
| Tracked Changes (Redline) - Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps | |
| Tracked Changes (Redline) - High-voltage test techniques \x97 Charge-based measurement of partial discharges | |
| Tracked Changes (Redline) - Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Safety Part 2-28: Particular requirements for sewing machines | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Safety Part 2-59: Particular requirements for insect killers | |
| Tracked Changes (Redline) - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance | |
| Tracked Changes (Redline) - Household electric cooking appliances \x97 Part 2: Hobs \x97 Methods for measuring performance | |
| Tracked Changes (Redline) - Hydraulic turbines - Testing of governing systems | |
| Tracked Changes (Redline) - Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests | |
| Tracked Changes (Redline) - Impulse tests on cables and their accessories | |
| Tracked Changes (Redline) - Industrial-process control valves - Part 4: Inspection and routine testing | |
| Tracked Changes (Redline) - Industrial-process control valves \x97 Part 1: Control valve terminology and general considerations | |
| Tracked Changes (Redline) - Industrial-process control valves Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves... | |
| Tracked Changes (Redline) - Insulating liquids - Determination of the breakdown voltage at power frequency - Test method | |
| Tracked Changes (Redline) - Insulation co-ordination Part 2: Application guidelines | |
| Tracked Changes (Redline) - Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods... | |
| Tracked Changes (Redline) - Laboratory resistors - Part 1: Laboratory DC resistors | |
| Tracked Changes (Redline) - Laboratory resistors \x97 Part 2: Laboratory AC resistors | |
| Tracked Changes (Redline) - Low-voltage fuses - Part 3: Supplementary requirements for fuses for operation by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems... | |
| Tracked Changes (Redline) - Low-voltage fuses \x97 Part 1: General requirements | |
| Tracked Changes (Redline) - Low-voltage fuses \x97 Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Tracked Changes (Redline) - Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires | |
| Tracked Changes (Redline) - Luminaires - Part 2-20: Particular requirements - Lighting chains | |
| Tracked Changes (Redline) - Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting | |
| Tracked Changes (Redline) - Luminaires \x97 Part 2-2: Particular requirements \x97 Recessed luminaires and recessed air-handling luminaires | |
| Tracked Changes (Redline) - Luminaires Part 1: General requirements and tests | |
| Tracked Changes (Redline) - Magnetic materials - Part 8-1: Specifications for individual materials - Permanent magnet (magnetically hard) materials | |
| Tracked Changes (Redline) - Magnetic materials \x97 Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet | |
| Tracked Changes (Redline) - Magnetic materials Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet | |
| Tracked Changes (Redline) - Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) | |
| Tracked Changes (Redline) - Measuring relays and protection equipment - Part 1: Common requirements | |
| Tracked Changes (Redline) - Measuring relays and protection equipment - Part 27: Product safety requirements | |
| Tracked Changes (Redline) - Measuring relays and protection equipment \x97 Part 26: Electromagnetic compatibility requirements | |
| Tracked Changes (Redline) - Medical electrical equipment - Dose area product meters | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV... | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for... | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2:34 - Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment | |
| Tracked Changes (Redline) - Medical electrical equipment \x97 Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers | |
| Tracked Changes (Redline) - Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment | |
| Tracked Changes (Redline) - Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories | |
| Tracked Changes (Redline) - Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment | |
| Tracked Changes (Redline) - Method for the determination of the proof and the comparative tracking indices of solid insulating materials | |
| Tracked Changes (Redline) - Method of sampling insulating liquids | |
| Tracked Changes (Redline) - Methods for measuring the performance of electric storage water heaters for household purposes | |
| Tracked Changes (Redline) - Mineral insulating oils in electrical equipment - Supervision and maintenance guidance | |
| Tracked Changes (Redline) - Miniature fuses - Part 6: Fuse-holders for miniature fuse-links | |
| Tracked Changes (Redline) - Miniature fuses \x97 Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| Tracked Changes (Redline) - Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases in mineral oils and other insulating liquids - Guidance | |
| Tracked Changes (Redline) - Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes | |
| Tracked Changes (Redline) - Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes | |
| Tracked Changes (Redline) - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories | |
| Tracked Changes (Redline) - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock | |
| Tracked Changes (Redline) - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements | |
| Tracked Changes (Redline) - Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers | |
| Tracked Changes (Redline) - Potentiometers for use in electronic equipment \x97 Part 3: Sectional specification: Rotary precision potentiometers | |
| Tracked Changes (Redline) - Power transformers - Part 19-1: Rules for the determination of uncertainties in the measurement of the losses on power transformers | |
| Tracked Changes (Redline) - Power transformers Part 11: Dry-type transformers | |
| Tracked Changes (Redline) - Primary batteries - Part 1: General | |
| Tracked Changes (Redline) - Primary batteries - Part 2: Physical and electrical specifications | |
| Tracked Changes (Redline) - Primary batteries - Part 3: Watch batteries | |
| Tracked Changes (Redline) - Primary batteries Part 4: Safety of lithium batteries | |
| Tracked Changes (Redline) - Radio interference test on high-voltage insulators | |
| Tracked Changes (Redline) - Resin based reactive compounds used for electrical insulation \x97 Part 2: Methods of test | |
| Tracked Changes (Redline) - Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 | |
| Tracked Changes (Redline) - Safety in installations for electroheating and electromagnetic processing - Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment | |
| Tracked Changes (Redline) - Safety in installations for electroheating and electromagnetic processing \x97 Part 4: Particular requirements for arc furnace installations | |
| Tracked Changes (Redline) - Safety in installations for electroheating and electromagnetic processing Part 12: Particular requirements for infrared electroheating | |
| Tracked Changes (Redline) - Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines | |
| Tracked Changes (Redline) - Safety of machinery \x96 Electrical equipment of machines Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and... | |
| Tracked Changes (Redline) - Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements | |
| Tracked Changes (Redline) - Series capacitors for power systems - Part 4: Thyristor controlled series capacitors | |
| Tracked Changes (Redline) - Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance | |
| Tracked Changes (Redline) - Solderless connections Part 2: Crimped connections - General requirements, test methods and practical guidance | |
| Tracked Changes (Redline) - Sound system equipment - Part 7: Headphones and earphones | |
| Tracked Changes (Redline) - Sound system equipment Part 3: Amplifiers | |
| Tracked Changes (Redline) - Sound system equipment Part 4: Microphones | |
| Tracked Changes (Redline) - Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment | |
| Tracked Changes (Redline) - Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment | |
| Tracked Changes (Redline) - Surge arresters Part 5: Selection and application recommendations | |
| Tracked Changes (Redline) - Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV | |
| Tracked Changes (Redline) - Tests for electric cables under fire conditions \x97 Circuit integrity Part 1: Test method for fire with shock at a temperature of at least 830\xb0C for... | |
| Tracked Changes (Redline) - Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus | |
| Tracked Changes (Redline) - Tests on electric and optical fibre cables under fire conditions Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A... | |
| Tracked Changes (Redline) - Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of verticallymounted bunched wires or cables - Category A... | |
| Tracked Changes (Redline) - Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B... | |
| Tracked Changes (Redline) - Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of verticallymounted bunched wires or cables - Category C... | |
| Tracked Changes (Redline) - Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D... | |
| Tracked Changes (Redline) - Thermocouples \x97 Part 3: Extension and compensating cables \x97 Tolerances and identification system | |
| Underwater acoustics - Hydrophones - Calibration of hydrophones Part 1: Procedures for free-field calibration of hydrophones | |
| Underwater acoustics \x97 Hydrophones \x97 Calibration of hydrophones Part 2: Procedures for low frequency pressure calibration |
| << Prev | Next >> |