Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
367
368
369
370
371
372
373
374
375
376
377
378
379
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 12: Laboratory Measurement of Room-To-Room Airborne and Impact Sound Insulation of an Access Floor | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 4: Field Measurements of Airbourne Sound Insulation between Rooms | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 5: Field Measurements of Airbourne Sound Insulation of Facade Elements and Facades | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Part 1: Requirements for Laboratory Test Facilities with Suppressed Flanking Transmission | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Part 3: Laboratory Measurements of Airborne Sound Insulation of Building Elements | |
| Acoustics \x97 Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation | |
| Acoustics \x97 Determination and application of measurement uncertainties in building acoustics Part 2: Sound absorption | |
| Acoustics Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors | |
| Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field | |
| Acoustics Measurement of sound insulation in buildings and of building elements Part 16: Laboratory measurement of the sound reduction index improvement by additional lining | |
| Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements | |
| Adhesives \x97 Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method | |
| Air quality - Sampling conventions for airborne particle deposition in the human respiratory system | |
| Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters Part 2: Preparation of methyl esters of fatty acids | |
| Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) | |
| Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters Part 4: Determination by capillary gas chromatography | |
| Animal and vegetable fats and oils \x97 Gas chromatography of fatty acid methyl esters Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters | |
| Animal and vegetable fats and oils Determination of isolated trans isomers by infrared spectrometry | |
| Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents | |
| Animal feeding stuffs - Determination of amino acids content | |
| Animal feeding stuffs Determination of tryptophan content | |
| Aseptic processing of health care products - Part 7: Alternative processes for medical devices and combination products | |
| Aseptic processing of health care products Part 1: General requirements | |
| Aseptic processing of health care products Part 2: Filtration | |
| Aseptic processing of health care products Part 3: Lyophilization | |
| Aseptic processing of health care products Part 4: Clean-in-place technologies | |
| Aseptic processing of health care products Part 5: Sterilization in place | |
| Aseptic processing of health care products Part 6: Isolator systems | |
| Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement | |
| Brazing - Qualification test of brazers and brazing operators | |
| Carbon Fibre - Designation System for Filament Yarns | |
| Cathodic protection of harbour installations | |
| Centrifugal pumps for petroleum, petrochemical and natural gas industries | |
| Cereals, pulses and milled products - Sampling of static batches | |
| Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth | |
| Characterization of pavement texture by use of surface profiles Part 5: Determination of megatexture | |
| Concentrates for haemodialysis and related therapies | |
| Dental Handpieces - Dental Air-Motors | |
| Dental Rotary Instruments - Mandrels | |
| Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple | |
| Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment | |
| Dentistry - Magnetic attachments | |
| Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type | |
| Dentistry - Reversible-Irreversi ble Hydrocolloid Impression Material Systems | |
| Dentistry \x97 Dental furnace Part 2: Test method for evaluation of furnace programme via firing glaze | |
| Dentistry \x97 Dental furnace Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple | |
| Dentistry \x97 Periodontal curettes, dental scalers and excavators Part 5: Jacquette scalers | |
| Dentistry \x97 Test Method for Determining Radio-Opacity of Materials | |
| Dentistry Amalgam capsules | |
| Determination of ferrite content in austenitic stainless steel castings | |
| Determination of flash point - Abel closed-cup method | |
| Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply Part 1: General EMC requirements under typical electromagnetic environmental conditions | |
| Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply Part 2: Additional EMC requirements for functional safety | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 Part 2: Abstract test suite | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Localisation augmentation communication for autonomous systems | |
| Electronic fee collection \x97 Evaluation of on-board and roadside equipment for conformity to EN ISO/TS 12813 Part 2: Abstract test suite | |
| Electronic fee collection \x97 Evaluation of on-board and roadside equipment for conformity to ISO 12813 Part 1: Test suite structure and test purposes | |
| Electronic fee collection \x97 Evaluation of on-board and roadside equipment for conformity to ISO 12813 | |
| Electronic fee collection \x97 Evaluation of on-board and roadside equipment for conformity to ISO 13141 | |
| Environmental Labels and Declarations - General Principles | |
| Environmental labels and declarations - Principles, requirements and guidelines for communication of footprint information | |
| Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling) | |
| Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures | |
| Environmental labels and declarations - Type III environmental declarations - Principles and procedures | |
| Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines | |
| Environmental management - Environmental assessment of sites and organizations (EASO) | |
| Environmental Management - Environmental Performance Evaluation - Guidelines | |
| Environmental management - Environmental technology verification (ETV) | |
| Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis | |
| Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment | |
| Environmental Management - Life Cycle Assessment - Life Cycle Interpretation | |
| Environmental Management - Life Cycle Assessment - Principles and Framework | |
| Environmental management - Life cycle assessment - Requirements and guidelines | |
| Environmental management \x97 Guidelines for determining environmental costs and benefits | |
| Environmental management \x97 Life cycle assessment \x97 Principles and framework | |
| Environmental management \x97 Water footprint \x97 Principles, requirements and guidelines | |
| Environmental management Life cycle assessment Requirements and guidelines | |
| Environmental management systems - General guidelines on principles, systems and support techniques | |
| Environmental management systems - Guidelines for incorporating ecodesign | |
| Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area Part 1: General | |
| Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area Part 2: Water | |
| Environmental management systems - Requirements with guidance for use | |
| Environmental Management Systems - Specification with Guidance for Use | |
| Environmental management systems \x97 Guidelines for a flexible approach to phased implementation | |
| Environmental management systems. Requirements with guidance for use | |
| Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces | |
| Ergonomic Requirements for Work with Visual Display Based on Flat Panels - Part 1: Introduction | |
| Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays | |
| Ergonomics of the Thermal Environment - Vocabulary and Symbols | |
| Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces | |
| Fans - Vocabulary and definitions of categories Part 2: Categories | |
| Fans \x97 Vocabulary and definitions of categories Part 1: Vocabulary | |
| Fans for general purposes - Part 10: Performance testing of jet fans | |
| Fans for general purposes - Part 4: Dimensions | |
| Fans for general purposes - Part 8: Vocabulary and definition of categories | |
| Fasteners - Grooved pins - General requirements | |
| Fasteners - Parallel grooved pins - Half-length diamond grooves | |
| Fasteners \x97 Reverse-taper grooved pins \x97 One quarter-length progressive grooves on both sides | |
| Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) 3-, 4- and 8-strand ropes | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization Part 1: Determination of grain size and size distribution | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization Part 2: Determination of phase volume fraction by evaluation of micrographs | |
| Fire Safety - Vocabulary | |
| Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection | |
| Gas cylinders - Fitting of valves to gas cylinders | |
| Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets | |
| Gas cylinders - Stamp marking | |
| Gel permeation chromatography (GPC) Part 1: Tetrahydrofuran (THF) as eluent | |
| Gel permeation chromatography (GPC) Part 2: N,N-Dimenthylacetami de (DMAC) as eluent | |
| Gel permeation chromatography (GPC) Part 3: Water as eluent | |
| Geometric Product Specifications (GPS) - Surface Texture: Profile Method - Surfaces Having Stratified Functional Properties - Part 1: Filtering and General Measurement Conditions | |
| Geometric Product Specifications (GPS) - Surface Texture: Profile Method - Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using Linear Material Ratio Curve | |
| Geometrical product specifications (GPS) - Dimensional Geometrical product specifications (GPS) - Dimensional Part 2: Calliper depth gauges; Design and metrological characteristics | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics | |
| Geometrical Product Specifications (GPS) - Indication of Surface Texture in Technical Product Documentation | |
| Geometrical product specifications (GPS) Surface texture: Profile method; surfaces having stratified functional properties Part 3: Height characterization using the material probability curve | |
| Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test | |
| Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage | |
| Geosynthetics - Dynamic perforation test (cone drop test) | |
| Geosynthetics Determination of friction characteristics Part 1: Direct shear test | |
| Geotextiles and Geotextile-Related Products - Abrasion Damage Simulation (Sliding Block Test) | |
| Geotextiles and Geotextile-Related Products - Determination of Tensile Creep and Creep Rupture Behaviour | |
| Geotextiles and Geotextile-Related Products - Determination of the Characteristic Opening Size | |
| Geotextiles and geotextile-related products - Determination of water flow capacity in their plane Part 1: Index test | |
| Geotextiles and geotextile-related products - Determination of water flow capacity in their plane Part 2: Performance test | |
| Geotextiles and Geotextile-Related Products - Determination of Water Flow Capacity in Their Plane | |
| Geotextiles and Geotextile-Related Products - Method for Installing and Extracting Samples in Soil, and Testing Specimens in Laboratory | |
| Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Liquids | |
| Geotextiles and geotextile-related products \x97 Strength of internal structural junctions \x97 Part 2: Geocomposites | |
| Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation | |
| Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells | |
| Guidelines for Environmental Auditing - Audit Procedures - Auditing of Environmental Management Systems | |
| Guidelines for Environmental Auditing - General Principles | |
| Guidelines for Environmental Auditing - Qualification Criteria for Environmental Auditors | |
| Health informatics - Clinical knowledge resources - Metadata | |
| Health informatics - Electronic health record communication Part 1: Reference model | |
| Health informatics - Electronic health record communication Part 2: Archetypes interchange specification | |
| Health informatics - Electronic health record communication Part 3: Reference archetypes and term lists | |
| Health informatics - Electronic health record communication Part 4: Security | |
| Health informatics - Electronic health record communication Part 5: Interface specification | |
| Health informatics - Service architecture Part 1: Enterprise viewpoint | |
| Health informatics - Service architecture Part 2: Information viewpoint | |
| Health informatics - Service architecture Part 3: Computational viewpoint | |
| Health informatics - System of concepts to support continuity of care | |
| Health informatics - Telehealth services - Quality planning guidelines | |
| Health informatics \x97 Clinical information models \x97 Characteristics, structures and requirements | |
| Health informatics \x97 Syntax to represent the content of healthcare classification systems \x97 Classification Markup Language (ClaML) | |
| High-Pressure Decorative Laminates - Composite Elements - Part 1: Test Methods | |
| High-pressure decorative laminates - Composite elements - Part 2: Specifications for composite elements with wood-based substrates for interior use | |
| Human-Centred Design Processes for Interactive Systems | |
| Hygrothermal Performance of Building Components and Building Elements - Internal Surface Temperature to Avoid Critical Surface Humidity and Interstitial Condensation - Calculation Methods | |
| Implants for surgery - Ceramic materials based on yttriastabilized tetragonal zirconia (Y-TZP) | |
| Industrial furnace and associated processing equipment - Safety Part 4: Protective systems | |
| Industrial furnaces and associated processing equipment - Safety Part 2: Combustion and fuel handling systems | |
| Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation | |
| Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method | |
| Laboratory glassware - Desiccators | |
| Laboratory glassware - Petri dishes | |
| Leather - Chemical tests - Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography | |
| Leather \x97 Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography Part 1: Acetonitrile extraction method | |
| Leather \x97 Chemical determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography Part 2: Artificial perspiration extraction method | |
| Liquefied petroleum gases \x96 Assessment of the dryness of propane \x96 Valve freeze method | |
| Lubricated metalpowder mixes - Determination of lubricant content - Modified Soxhlet extraction method | |
| Meat and meat products - Enumeration of presumptive Pseudomonas spp. | |
| Mechanical joining \x97 Destructive testing of joints \x97 Specimen dimensions and test procedure for tensile shear testing of single joints | |
| Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to Whole-Body Mechanical Vibration and Repeated Shock | |
| Mechanical Vibration and Shock - Hand-Arm Vibration - Method for Measuring the Vibration Transmissibility of Resilient Materials When Loaded by the Hand-Arm System | |
| Medical devices - Quality management systems - Requirements for regulatory purposes | |
| Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient | |
| Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) | |
| Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen | |
| Microbiology of food and animal feed \x97 Primary production stage \x97 Sampling techniques | |
| Milk - Enumeration of Somatic Cells Part 1: Microscopic Method | |
| Milk - Enumeration of Somatic Cells Part 2: Method Using an Electronic Particle Counter | |
| Milk - Enumeration of Somatic Cells Part 3: Fluoro-Opto-Electron ic Method | |
| Milk and milk products - Guidelines for a standardized description of microbial inhibitor tests | |
| Monetary valuation of environmental impacts and related environmental aspects | |
| Natural Gas - Organic Sulfur Compounds Used as Odorants - Requirements and Test Methods | |
| Natural Gas - Standard Reference Conditions | |
| Natural gas Quality designation | |
| Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology | |
| Oil and gas industries including lower carbon energy - Piping systems on offshore platforms and onshore plants Part 2: Materials | |
| Oil and gas industries including lower carbon energy - Piping systems on offshore production platforms and onshore plants Part 3: Fabrication | |
| Ophthalmic Optics - Bar Code Specifications | |
| Ophthalmic Optics - Contact Lens Care Products - Guidelines for the Determination of Shelf-Life | |
| Ophthalmic Optics - Spectacle Lenses - Vocabulary | |
| Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Bower (Energy) Density Distribution | |
| Optics and Optical Instruments - Test Methods for Radiation Scattered by Optical Components | |
| Optics and photonics - Lasers and laser related equipment - Test methods for the spectral characteristics of lasers | |
| Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components | |
| Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems | |
| Packaging \x97 Transport packaging for dangerous goods \x97 Plastics compatibility testing for packaging and IBCs | |
| Packaging Complete, filled transport packages and unit loads Vertical random vibration test | |
| Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 8: Development of Specifications for New Work and Maintenance | |
| Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements | |
| Paints and varnishes - Lighting and procedure for visual assessments of coatings | |
| Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures | |
| Paints and varnishes Determination of reflection haze on paint films at 20 degrees | |
| Periodontal Curettes, Dental Scalers and Excavators Part 1: General Requirements | |
| Periodontal Curettes, Dental Scalers and Excavators Part 2: Periodontal Curettes - Gr-Type | |
| Periodontal Curettes, Dental Scalers and Excavators Part 3: Dental Scalers - H-Type | |
| Periodontal Curettes, Dental Scalers and Excavators Part 4: Dental Excavators - Discard Type | |
| Personal protective equipment - Footwear - Test method for slip resistance | |
| Petroleum and Natural Gas Industries - Air Cooled Heat Exchangers | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines | |
| Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants | |
| Petroleum and Natural Gas Industries - Control and Mitigation of Fires and Explosions on Offshore Production Installations - Requirements and Guidelines | |
| Petroleum and Natural Gas Industries - Corrosion-Resistant Alloy Seamless Tubes for Use as Casing, Tubing and Coupling Stock - Technical Delivery Conditions | |
| Petroleum and Natural Gas Industries - Design and Installation of Piping Systems on Offshore Production Platforms | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe | |
| Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 1: General Requirements and Recommendations | |
| Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 2: Flexible Pipe Systems for Subsea and Marine Applications | |
| Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 3: Through Flowline (FTL) Systems | |
| Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 4: Subsea Wellhead and Tree Equipment | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely operated tool (ROT) intervention systems | |
| Petroleum and natural gas industries - Design and operation of subsea production systems Part 15: Subsea structures and manifolds | |
| Petroleum and natural gas industries - Design and operation of subsea production systems Part 5: Subsea umbilicals | |
| Petroleum and Natural Gas Industries - Drilling and Production Equipment - Drill-Through Equipment | |
| Petroleum and Natural Gas Industries - Drilling and Production Equipment - Hoisting Equipment | |
| Petroleum and Natural Gas Industries - Drilling and Production Equipment - Inspection, Maintenance, Repair and Re-Manufacture of Hoisting Equipment | |
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings | |
| Petroleum and natural gas industries - Drilling and production equipment Part 1: Design and operation of marine drilling riser equipment | |
| Petroleum and Natural Gas Industries - Drilling Fluid Materials - Specifications and Tests | |
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation | |
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements | |
| Petroleum and Natural Gas Industries - Fired Heaters for General Refinery Service | |
| Petroleum and Natural Gas Industries - Offshore Structures Part 1: General Requirements | |
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections | |
| Petroleum and natural gas industries \x97 Aluminium alloy pipe for use as tubing for wells | |
| Petroleum and natural gas industries \x97 Completion fluids and materials \x97 Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions | |
| Petroleum and natural gas industries \x97 Completion fluids and materials Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions | |
| Petroleum and natural gas industries \x97 Drilling and production equipment \x97 Shallow gas diverter equipment | |
| Petroleum and natural gas industries \x97 High-speed special-purpose gear units | |
| Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids | |
| Petroleum and natural gas industries Completion fluids and materials Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | |
| Petroleum and natural gas industries Drilling and production equipment Drilling and well-servicing structures | |
| Petroleum and natural gas industries Packaged reciprocating gas compressors | |
| Petroleum products \x97 Determination of low concentration of sulfur in automotive fuels \x97 Energy-dispersive X-ray fluorescence spectrometric method | |
| Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries | |
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps | |
| Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument | |
| Plastics - Determination of the Total Luminous Transmittance of Transparent Materials Part 1: Single-Beam Instrument | |
| Plastics - Polytetrafluoroethyl ene (PTFE) Semi-Finished Products Part 1: Requirements and Designation | |
| Plastics - Polytetrafluoroethyl ene (PTFE) Semi-Finished Products Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Simple heat release test using a conical radiant heater and a thermopile detector | |
| Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing | |
| Plastics Pipes for the Conveyance of Fluids Under Pressure - Miner's Rule - Calculation Method for Cumulative Damage | |
| Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility | |
| Plastics Piping Systems - Elastomeric-Sealing- Ring-Type Socket Joints for Use with Unplasticized Poly (Vinyl Chloride)(PVC-U) Pipes - Test Method for Leaktightness under Internal Pressure and with Angular Deflection | |
| Plastics Piping Systems - Elastomeric-Sealing- Ring-Type Socket Joints of Unplasticized Poly (Vinyl Chloride)(PVC-U) for Use with PVC-U Pipes - Test Method for Leaktightness under Negative Pressure | |
| Plastics Piping Systems - End-Load-Bearing and Non-End-Load Bearing Assemblies and Joints for Thermoplastics Pressure Piping - Test Method for Long-Term Leaktightness Under Internal Water Pressure | |
| Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) End-Load-Bearing Double-Socket Joints - Test Method for Leaktightness and Strength While Subjected to Bending and Internal Pressure | |
| Plastics piping systems \x96 Pressure systems for hot and cold water \x96 Test method for leaktightness under vacuum | |
| Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes (Notch Test) | |
| Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives | |
| Protective clothing - General requirements | |
| Protective Clothing - Mechanical Properties - Determination of Resistance to Cutting by Sharp Objects | |
| Protective Clothing - Mechanical Properties - Test Method for the Determination of the Resistance to Puncture and Dynamic Tearing of Materials | |
| Protective clothing \x97 General requirements | |
| Protective clothing against heat and flame Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin | |
| Protective clothing against heat and flame Part 2: Skin burn injury prediction \x97 Calculation requirements and test cases | |
| Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) | |
| Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits | |
| Protective clothing for use against solid particulates Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) | |
| Quality Systems - Medical Devices - Particular Requirements for the Application of EN ISO 9001 | |
| Quality systems - Medical devices - Particular requirements for the application of EN ISO 9002 | |
| Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles | |
| Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 2: ex vivo human tooth enamel dosimetry | |
| Recreational diving services - Requirements for gas blender training programmes | |
| Refrigeration systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements and classification | |
| Robots and robotic devices \x97 Safety requirements for personal care robots | |
| Rubber and Plastic Hoses for General-Purpose Industrial Applications - Bore Diameters and Tolerances, and Tolerances on Length | |
| Rubber and Plastics Hoses and Hoses Assemblies - Hydrostatic Testing | |
| Rubber Hoses for Agricultural Spraying | |
| Rubber Hoses, Textile-Reinforced, for General-Purpose Water Application - Specification | |
| Safety of machinery - Emergency stop - Principles for design | |
| Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body | |
| Safety of machinery - Pressure-sensitive protective devices Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors | |
| Safety of machinery - Pressure-sensitive protective devices Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars | |
| Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs | |
| Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design | |
| Safety of machinery - Two-hand control devices - Principles for design and selection | |
| Safety of machinery \x96 Minimum gaps to avoid crushing of parts of the human body | |
| Safety of machinery \x97 Pressure-sensitive protective devices Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices | |
| Safety of machinery Safety-related parts of control systems Part 2: Validation | |
| Sensory analysis - Methodology - General guidance for establishing a sensory profile | |
| Small craft - Electrical systems - Alternating and direct current installations | |
| Small Craft - Electrical Systems - Alternating Current Installations | |
| Small Craft - Steering Gear - Geared Link Systems | |
| Small craft Personal watercraft Construction and system installation requirements | |
| Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument | |
| Spring-Type Straight Pins - Slotted, Light Duty | |
| Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination | |
| Stationary source emissions \x97 Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes \x97 Non-dispersive infrared analyser equipped with catalytic converter | |
| Steel - Determination of boron content - Curcumin spectrophotometric method after distillation | |
| Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VD max SD | |
| Surgical and Dental Hand Instruments - Determination of Resistance Against Autoclaving, Corrosion and Thermal Exposure | |
| Technical product documentation - Edges of undefined shape - Indication and dimensioning | |
| Technical Product Documentation - Organization and Naming of Layers for CAD - Part 1: Overview and Principles | |
| Technical Product Documentation - Organization and Naming of Layers for CAD - Part 2: Concepts, Format and Codes Used in Construction Documentation | |
| Textile floor coverings \x97 Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine | |
| Textiles - Burning Behaviour of Bedding Items - Part 1: General Test Methods for the Ignitability by a Smouldering Cigarette | |
| Textiles - Burning Behaviour of Bedding Items - Part 2: Specific Test Methods for the Ignitability by a Smouldering Cigarette | |
| Textiles - Burning Behaviour of Bedding Items - Part 3: General Test Methods for the Ignitability by a Small Open Flame | |
| Textiles - Burning Behaviour of Bedding Items - Part 4: Specific Test Methods for the Ignitability by a Small Open Flame | |
| Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension | |
| Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting Distension | |
| Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 1: Pilling Box Method | |
| Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 2: Modified Martindale Method | |
| Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 1: Martindale Abrasion Testing Apparatus | |
| Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown | |
| Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 3: Determination of Mass Loss | |
| Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 4: Assessment of Appearance Change | |
| Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method | |
| Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 1: Determination of Maximum Force to Seam Rupture Using the Strip Method | |
| Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 2: Determination of Maximum Force to Seam Rupture Using the Grab Method | |
| Textiles - Standard atmospheres for conditioning and testing | |
| Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf) | |
| Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-Shaped Test Specimens (Single Tear Method) | |
| Textiles - Tear Properties of Fabrics - Part 3: Determination of Tear Force of Wing-Shaped Test Specimens (Single Tear Method) | |
| Textiles - Tear Properties of Fabrics - Part 4: Determination of Tear Force of Tongue-Shaped Test Specimens (Double Tear Method) | |
| Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method | |
| Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force Using the Grab Method | |
| Textiles \x97 Determination of fabric propensity to surface pilling, fuzzing or matting Part 4: Assessment of pilling, fuzzing or matting by visual analysis | |
| Textiles \x97 Determination of the fabric propensity to surface pilling, fuzzing or matting Part 3: Random tumble pilling method | |
| Textiles \x97 Determination of the slippage resistance of yarns at a seam in woven fabrics \x97 Part 2: Fixed load method | |
| Textiles \x97 Determination of the slippage resistance of yarns at a seam in woven fabrics \x97 Part 3: Needle clamp method | |
| Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity | |
| Thermal Performance of Building Components - Dynamic Thermal Characteristics - Calculation Methods | |
| Thermal Performance of Buildings - Heat Transfer via the Ground - Calculation Methods | |
| Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost Heave | |
| Thermal Performance of Buildings - Transmission Heat Loss Coefficient - Calculation Method | |
| Thermal performance of buildings Calculation of energy use for space heating | |
| Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures | |
| Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods | |
| Thermoplastics fittings - Determination of ring stiffness | |
| Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Full-Scale Test | |
| Thermoplastics pipes for the conveyance of fluids \x97 Determination of resistance to rapid crack propagation (RCP) \x97 Small-scale steady-state test (S4 test) | |
| Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling | |
| Thermoplastics piping systems for non-pressure applications - Test method for watertightness | |
| Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness | |
| Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam | |
| Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints | |
| Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils \x97 Gas chromatography of fatty acid methyl esters Part 2: Preparation of methyl esters of fatty acids | |
| Tracked Changes (Redline) - Animal and vegetable fats and oils \x97 Gas chromatography of fatty acid methyl esters Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) | |
| Tracked Changes (Redline) - Animal feeding stuffs \x97 Determination of tryptophan content | |
| Tracked Changes (Redline) - Aseptic processing of health care products - Part 6: Isolator systems | |
| Tracked Changes (Redline) - Aseptic processing of health care products Part 2: Sterilizing filtration | |
| Tracked Changes (Redline) - Aseptic processing of healthcare products Part 1: General requirements | |
| Tracked Changes (Redline) - Brazing \x97 Qualification testing of brazers and brazing operators | |
| Tracked Changes (Redline) - Characterization of pavement texture by use of surface profiles \x97 Part 5: Determination of megatexture | |
| Tracked Changes (Redline) - Dentistry - Dental amalgam reusable mixing-capsules | |
| Tracked Changes (Redline) - Determination of ferrite content in austenitic stainless steel castings | |
| Tracked Changes (Redline) - Determination of flash point - Abel closed-cup method | |
| Tracked Changes (Redline) - Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 12813 | |
| Tracked Changes (Redline) - Electronic fee collection - Localization augmentation communication for autonomous systems | |
| Tracked Changes (Redline) - Electronic fee collection \x97 Evaluation of on-board and roadside equipment for conformity to ISO 13141 | |
| Tracked Changes (Redline) - Environmental labels and declarations - Type I environmental labelling - Principles and procedures | |
| Tracked Changes (Redline) - Environmental management - Environmental performance evaluation - Guidelines | |
| Tracked Changes (Redline) - Environmental management - Guidelines for environmental due diligence assessment | |
| Tracked Changes (Redline) - Environmental management systems - Guidelines for a flexible approach to phased implementation | |
| Tracked Changes (Redline) - Environmental management systems - Requirements with guidance for use | |
| Tracked Changes (Redline) - Environmental management systems \x97 General guidelines on implementation | |
| Tracked Changes (Redline) - Environmental statements and programmes for products \x97 Principles and general requirements | |
| Tracked Changes (Redline) - Fans - Vocabulary and definitions of categories - Part 2: Categories | |
| Tracked Changes (Redline) - Fans \x97 Dimensions | |
| Tracked Changes (Redline) - Fans \x97 Performance testing of jet fans | |
| Tracked Changes (Redline) - Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes | |
| Tracked Changes (Redline) - Fire safety - Vocabulary | |
| Tracked Changes (Redline) - Gas cylinders - Fitting of valves to gas cylinders | |
| Tracked Changes (Redline) - Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet | |
| Tracked Changes (Redline) - Gas cylinders - Stamp marking | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) \x96 Dimensional measuring equipment Part 2: Design and metrological characteristics of calliper depth gauges | |
| Tracked Changes (Redline) - Geosynthetics - Determination of dynamic perforation (cone drop test) | |
| Tracked Changes (Redline) - Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test | |
| Tracked Changes (Redline) - Geosynthetics - Determination of friction characteristics Part 1: Direct shear test | |
| Tracked Changes (Redline) - Geosynthetics - Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation | |
| Tracked Changes (Redline) - Geosynthetics \x97 Abrasion damage simulation (sliding block test) | |
| Tracked Changes (Redline) - Geosynthetics \x97 Determination of the protection efficiency of a geosynthetic against impact damage | |
| Tracked Changes (Redline) - Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour | |
| Tracked Changes (Redline) - Geotextiles and geotextile-related products \x97 Determination of the characteristic opening size | |
| Tracked Changes (Redline) - Geotextiles and geotextile-related products \x97 Strength of internal structural junctions \x97 Part 2: Geocomposites | |
| Tracked Changes (Redline) - Health informatics - Clinical information models - Characteristics, structures and requirements | |
| Tracked Changes (Redline) - Health informatics - Clinical knowledge resources - Metadata | |
| Tracked Changes (Redline) - Health informatics - Electronic health record communication Part 5: Interface specification | |
| Tracked Changes (Redline) - Implants for surgery - Ceramic materials based on yttriastabilized tetragonal zirconia (Y-TZP) | |
| Tracked Changes (Redline) - Industrial furnaces and associated processing equipment - Safety - Part 4: Protective systems | |
| Tracked Changes (Redline) - Laboratory glassware - Petri dishes | |
| Tracked changes (Redline) - Medical devices \x97 Quality management systems \x97 Requirements for regulatory purposes | |
| Tracked Changes (Redline) - Metallic powders \x97 Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen | |
| Tracked Changes (Redline) - Non-destructive testing of welds \x96 Ultrasonic testing \x96 Use of automated phased array technology | |
| Tracked Changes (Redline) - Oil and gas industries including low carbon energy - Design and operation of subsea production systems - Part 1: General requirements and recommendations | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy \x97 Completion fluids and materials \x97 Part 2: Measurement of properties of proppants used in hydraulic fracturing and... | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy \x97 Piping systems on offshore production platforms and onshore plants \x97 Part 3: Fabrication | |
| Tracked Changes (Redline) - Ophthalmic optics - Spectacle lenses - Vocabulary | |
| Tracked Changes (Redline) - Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution | |
| Tracked Changes (Redline) - Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers | |
| Tracked Changes (Redline) - Optics and photonics - Test method for total scattering by optical components | |
| Tracked Changes (Redline) - Packaging \x97 Complete, filled transport packages and unit loads \x97 Vertical random vibration test | |
| Tracked Changes (Redline) - Paints and varnishes \x96 Corrosion protection of steel structures by protective paint systems Part 8: Development of specifications for new work and maintenance | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines | |
| Tracked Changes (Redline) - Petroleum and natural gas industries \x97 Control and mitigation of fires and explosions on offshore production installations \x97 Requirements and guidelines | |
| Tracked Changes (Redline) - Petroleum and related products \x97 Determination of low concentration of sulfur in automotive fuels \x97 Energy-dispersive X-ray fluorescence spectrometric method | |
| Tracked Changes (Redline) - Petroleum, petrochemical and natural gas industries \x97 Calculation of heater-tube thickness in petroleum refineries | |
| Tracked Changes (Redline) - Plastics - Polytetrafluoroethyl ene (PTFE) semi-finished products - Part 1: Requirements and designation | |
| Tracked Changes (Redline) - Plastics - Polytetrafluoroethyl ene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties | |
| Tracked Changes (Redline) - Plastics - Simple heat release test using a conical radiant heater and a thermopile detector | |
| Tracked Changes (Redline) - Plastics \x97 Verification of pendulum impact-testing machines \x97 Charpy, Izod and tensile impact-testing | |
| Tracked Changes (Redline) - Plastics piping systems \x97 Elastomeric-sealing- ring-type socket joints for use with plastic pressure pipes \x97 Test method for leak tightness under negative pressure, angular deflection and... | |
| Tracked Changes (Redline) - Plastics piping systems \x97 Elastomeric-sealing- ring-type socket joints for use with thermoplastic pressure pipes \x97 Test method for leaktightness under internal pressure and with angular deflection... | |
| Tracked Changes (Redline) - Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes | |
| Tracked Changes (Redline) - Protective clothing - Mechanical properties. Determination of resistance to cutting by sharp objects | |
| Tracked Changes (Redline) - Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin | |
| Tracked Changes (Redline) - Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases | |
| Tracked Changes (Redline) - Rubber hoses for agricultural spraying | |
| Tracked Changes (Redline) - Safety of machinery \x97 Emergency stop function \x97 Principles for design | |
| Tracked Changes (Redline) - Safety of machinery \x97 Positioning of safeguards with respect to the approach of the human body | |
| Tracked Changes (Redline) - Safety of machinery \x97 Safety-related parts of control systems Part 1: General principles for design | |
| Tracked Changes (Redline) - Safety of machinery \x97 Safety-related parts of control systems Part 2: Validation | |
| Tracked Changes (Redline) - Sensory analysis \x97 Methodology \x97 General guidance for establishing a sensory profile | |
| Tracked Changes (Redline) - Small craft - Electrical systems - Alternating current installations | |
| Tracked Changes (Redline) - Small craft - Steering gear - Geared link systems | |
| Tracked Changes (Redline) - Small craft \x97 Personal watercraft \x97 Construction and system installation requirements | |
| Tracked Changes (Redline) - Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure | |
| Tracked Changes (Redline) - Technical product documentation - Organization and naming of layers for CAD Part 1: Overview and principles | |
| Tracked Changes (Redline) - Textiles \x97 Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension | |
| Tracked Changes (Redline) - Textiles \x97 Determination of the abrasion resistance of fabrics by the Martindale method Part 2: Determination of specimen breakdown | |
| Tracked Changes (Redline) - Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method | |
| Tracked Changes (Redline) - Thermoplastics piping systems for nonpressure applications \x96 Test method for resistance to elevated temperature cycling | |
| Tracked Changes (Redline) - Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry | |
| Tracked Changes (Redline) - Water quality - Carbon 14 - Test method using liquid scintillation counting | |
| Tracked Changes (Redline) - Water quality - Lead-210 - Test method using liquid scintillation counting | |
| Tracked Changes (Redline) - Water quality - Radium-226 - Part 2: Test method using emanometry | |
| Tracked Changes (Redline) - Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-ray spectrometry | |
| Tracked Changes (Redline) - Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting | |
| Tracked Changes (Redline) - Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting | |
| Tracked Changes (Redline) - Water quality \x97 Radium-226 \x97 Part 1: Test method using liquid scintillation counting | |
| Tracked Changes (Redline) - Welding - General tolerances for welded constructions - Dimensions for lengths and angles, shape and position | |
| Tracked Changes (Redline) - Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature | |
| Tracked Changes (Redline) - Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods | |
| Tracked Changes (Redline) \x96 Health informatics - Electronic health record communication Part 1: Reference model | |
| Tracked Changes (Redline) \x96 Health informatics - Syntax to represent the content of healthcare classification systems - Classification Markup Language (ClaML) | |
| Tracked Changes (Redline) \x96 Petroleum and natural gas industries \x97 Procedures for testing casing and tubing connections | |
| Tracked Changes (Redline) \x96 Plastics - Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument | |
| Transportable Gas Cylinders - Cylinder Valves for Non-Refillable Cylinders - Specification and Prototype Testing | |
| Transportable Gas Cylinders - Fitting of Valves to Gas Cylinders | |
| Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry | |
| Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) | |
| Water for haemodialysis and related therapies | |
| Water quality - Lead-210 - Test method using liquid scintillation counting | |
| Water quality - Radium-226 Part 1: Test method using liquid scintillation counting | |
| Water quality - Radium-226 Part 2: Test method using emanometry | |
| Water quality - Radium-226 Part 3: Test method using coprecipitation and gamma-spectrometry | |
| Water quality - Radon-222 Part 2: Test method using gamma-ray spectrometry | |
| Water quality - Radon-222 Part 4: Test method using two-phase liquid scintillation counting | |
| Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods | |
| Water quality \x97 Determination of carbon 14 activity \x97 Liquid scintillation counting method | |
| Water quality \x97 Determination of selected estrogens in whole water samples \x97 Method using solid phase extraction (SPE) followed by liquid chromatography (LC) or gas chromatography (GC) coupled to mass... | |
| Water quality \x97 Measurement of polonium 210 activity concentration in water by alpha spectrometry | |
| Water quality \x97 Radon-222 Part 1: General principles | |
| Water quality \x97 Radon-222 Part 3: Test method using emanometry | |
| Water quality \x97 Strontium 90 and strontium 89 \x97 Test methods using liquid scintillation counting or proportional counting | |
| Water Quality Determination of Nitrite Nitrogen and Nitrate Nitrogen and the Sum of Both by Flow Analysis (CFA and FIA) and Spectrometric Detection | |
| Welding - Electron and Laser Beam Welded Joints - Guidance on quality Levels for Imperfections Part 1: Steel | |
| Welding - Electron and Laser Beam Welding Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and its Weldable Alloys | |
| Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position | |
| Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature | |
| Welding - Studs and Ceramic Ferrules for Arc Stud Welding | |
| Welding \x96 Studs and ceramic ferrules for arc stud welding | |
| Wool - Determination of fibre diameter - Projection microscope method | |
| Workplace atmospheres \x97 Pumps for personal sampling of chemical and biological agents \x97 Requirements and test methods | |
| Woven fabrics \x97 Distortion \x97 Determination of skew and bow |
| << Prev | Next >> |