Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
369
370
371
372
373
374
375
376
377
378
379
380
381
390
400
410
420
430
440
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Absorbent incontinence aids for urine and/or faeces \x97 General guidelines on evaluation | |
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions | |
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy | |
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure | |
| Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 4: Machines with 2-D moving optics | |
| Acoustics - Guidelines for Noise Control by Enclosures and Cabins | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements | |
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies | |
| Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method | |
| Adhesives for thermoplastic piping systems \x97 Test method for the determination of thermal stability of adhesives | |
| Adhesives Sampling | |
| Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS | |
| Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method | |
| Animal and Vegetable Fats and Oils - Determination of Cadmium Content by Direct Graphite Furnace Atomic Absorption Spectrometry | |
| Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons - Exclusion of olive pomace oil from the scope | |
| Animal and Vegetable Fats and Oils - Determination of Sediment in Crude Fats and Oils - Centrifuge Method | |
| Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 1: Method Using Capillary-Column Gas Chromatography (Reference Method) | |
| Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography (HPLC) | |
| Animal and Vegetable Fats and Oils - Determination of the Content of Trans Fatty Acid Isomers of Vegetable Fats and Oils - Gas Chromatographic Method | |
| Animal and vegetable fats and oils Determination of low-boiling halogenated hydrocarbons in edible oils | |
| Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons | |
| Animal feeding stuffs Enzymatic determination of total starch content | |
| Binders for paints and varnishes - Determination of turbidity | |
| Cathodic protection - Competence levels of cathodic protection persons - Basis for certification scheme | |
| Closed and blind rivets with break pull mandrel and countersunk head - AIA/St | |
| Closed and Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St | |
| Closed end blind rivets with break pull mandrel and protruding head AI/AIA | |
| Closed end blind rivets with break pull mandrel and protruding head St/St | |
| Clothing \x97 Physiological effects \x97 Measurement of thermal insulation by means of a thermal manikin | |
| Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys | |
| Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test | |
| Cross Recessed Countersunk Head Drilling Screws with Tapping Screw Thread | |
| Cross Recessed Pan Head Drilling Screws with Tapping Screw Thread | |
| Cross Recessed Raised Countersunk Head Drilling Screws with Tapping Screw Thread | |
| Dental Aqueous Impression Materials Based on Agar | |
| Dental Casting Wax | |
| Dental Elevators - Part 1: General Requirements | |
| Dental Elevators - Part 2: Warwick James Elevators | |
| Dental Elevators - Part 3: Cryer Elevators | |
| Dental Elevators - Part 4: Coupland Elevators | |
| Dental Elevators - Part 5: Bein Elevators | |
| Dental Elevators - Part 6: Flohr Elevators | |
| Dental Handpieces - Air-Powered Scalers and Scaler Tips | |
| Dental Materials - Alloys for Dental Amalgam | |
| Dental Tweezers - Part 1: General Requirements | |
| Dental Tweezers - Part 2: Meriam Types | |
| Dental Tweezers - Part 3: College Types | |
| Dentistry - Casting and baseplate waxes | |
| Dentistry - Casting investments and refractory die materials | |
| Dentistry - Denture Base Polymers | |
| Dentistry - Wires for use in orthodontics | |
| Dentistry \x96 Dental tweezers | |
| Dentistry \x97 Dental elevators | |
| Dentistry Casting gold alloys | |
| Dentistry Casting investments and refractory die materials | |
| Dentistry Wires for use in orthodontics | |
| Downhole Equipment for Petroleum and Natural Gas Industries - Progressing Cavity Pump Systems for Artificial Lift - Part 1: Pumps | |
| Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests | |
| Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems | |
| Ergonomics Computer manikins and body templates Part 1: General requirements | |
| Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions | |
| Ergonomics of the thermal environment \x97 Cold workplaces \x97 Risk assessment and management | |
| Fasteners - Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bearing Surface Method | |
| Fasteners - Torque/clamp force testing | |
| Fasteners Torque/clamp force testing | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method | |
| Fishing nets - Description and designation of knotted netting | |
| Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method | |
| Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 1: High Performance Liquid Chromatographic Method with Silica Gel Clean up | |
| Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 2: High Performance Liquid Chromatographic Method with Bicarbonate Clean up | |
| Gas analysis - Investigation and treatment of analytical bias | |
| Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 1: Specification | |
| Gas Cylinders - Parallel Threads for Connection of Valves to Gas Cylinders - Part 2: Gauge Inspection | |
| Gas cylinders - Residual pressure valves - General requirements and type testing | |
| Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated | |
| Gas cylinders Residual pressure valves General requirements and type testing | |
| Gas Welding Equipment - Acetylene Maniforld Sytems for Welding, Cutting and Allied Processes - Safety Requirements in High-Pressure Devices | |
| Gas welding equipment - Vocabulary | |
| General requirements for establishing anthropometric databases | |
| Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or measurement standards | |
| Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2) | |
| Hexagon Washer Head Drilling Screws with Tapping Screw Thread | |
| Household refrigerating appliances Characteristics and test methods | |
| Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems | |
| Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion | |
| Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling | |
| Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating | |
| Hygrothermal performance of buildings - Calculation and presentation of climatic data Part 2: Hourly data for design cooling load | |
| Hygrothermal performance of buildings - Calculation and presentation of climatic data Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data | |
| Hygrothermal performance of buildings - Calculation and presentation of climatic data Part 6: Accumulated temperature differences (degree-days) | |
| Hygrothermal performance of buildings Calculation and presentation of climatic data Part 1: Monthly means of single meteorological elements | |
| In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation | |
| In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures | |
| In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus | |
| Indoor air - Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) | |
| Indoor air - Part 1: General aspects of sampling strategy | |
| Indoor air - Part 2: Sampling strategy for formaldehyde | |
| Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) | |
| Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations | |
| Indoor air \x97 Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing \x97 Sampling, storage of samples and preparation of test specimens... | |
| Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method | |
| Indoor air Part 11: Determination of the emission of volatile organic compounds from building products and furnishing Sampling, storage of samples and preparation of test specimens | |
| Indoor air Part 15: Sampling strategy for nitrogen dioxide (NO2) | |
| Indoor air Part 19: Sampling strategy for moulds | |
| Indoor air Part 26: Sampling strategy for carbon dioxide (CO2) | |
| Indoor air Part 32: Investigation of buildings for the occurrence of pollutants | |
| Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing Emission test chamber method | |
| Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling | |
| Indoor, ambient and workplace air Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 2: Diffusive sampling | |
| Industrial valves \x97 Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves | |
| Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves | |
| Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 2 : Production acceptance test of valves | |
| Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols | |
| Information technology Automatic identification and data capture techniques Bar code symbology specifications PDF417 | |
| Intermediate bulk containers (IBCs) for non-dangerous goods \x97 Terminology | |
| Laboratory medicine Requirements for reference measurement laboratories | |
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors | |
| Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 1: Terminology and fundamental aspects | |
| Leather - Tests for Colour Fastness - Colour Fastness to Machine Washing | |
| Leather - Tests for Colour Fastness - Colour Fastness to Migration into Plasticized Poly(Vinyl Chloride) | |
| Leather - Tests for Colour Fastness - Colour Fastness to Mild Washing | |
| Leather - Tests for Colour Fastness - Colour Fastness to Water Spotting | |
| Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts | |
| Manipulating industrial robots Graphical user interfaces for programming and operation of robots (GUI-R) | |
| Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements | |
| Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied General requirementsts | |
| Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. General requirements | |
| Medical laboratories - Particular requirements for quality and competence | |
| Medical laboratories - Requirements for quality and competence | |
| Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel | |
| Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour | |
| Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography | |
| Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds | |
| Metallic materials \x97 Tube ring hydraulic pressure test | |
| Method of Test for Petroleum and its Products - BS 2000-492: Determination of Flash Point - Closed Cup Equilibrium Method | |
| Methods of Test for Paints - Part E2: Scratch Test | |
| Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR Part 1: Method for quantification | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique | |
| Microbiology of the food chain \x96 Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR Part 2: Method for detection | |
| Microbiology of the food chain \x97 Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR Part 1: Method for quantification | |
| Microbiology of the food chain \x97 Horizontal method for the detection and enumeration of Clostridium spp. Part 2: Enumeration of Clostridium perfringens by colony-count technique | |
| Milk, milk products, infant formula and adult nutritionals \x97 Determination of minerals and trace elements \x97 Inductively coupled plasma atomic emission spectrometry (ICP-AES) method | |
| Milling Cutters for High Speed Machining - Safety Requirements | |
| Natural gas - Energy determination | |
| Natural gas - Measurement of properties - Calorific value and Wobbe index | |
| Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor | |
| Natural gas \x97 Natural gas for use as a compressed fuel for vehicles Part 1: Designation of the quality | |
| Nomenclature - Specification for a Nomenclature System for Medical Devices for the Purpose of Regulatory Data Exchange | |
| Non-destructive testing - Eddy current testing - General principles | |
| Non-destructive testing - Equipment for eddy current examination Part 1: Instrument characteristics and verification | |
| Non-destructive testing - Equipment for eddy current examination Part 2: Probe characteristics and verification | |
| Non-destructive testing - Radiation methods for computed tomography Part 1: Terminology | |
| Non-destructive testing - Radiation methods for Computed tomography Part 2: Principles, equipment and samples | |
| Non-destructive testing - Radiation methods for computed tomography Part 3: Operation and interpretation | |
| Non-destructive testing - Radiation methods for computed tomography Part 4: Qualification | |
| Non-destructive testing \x97 Equipment for eddy current examination Part 3: System characteristics and verification | |
| Non-destructive testing of welds \x97 Time-of-flight diffraction technique (TOFD) \x97 Acceptance levels | |
| Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method | |
| Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography Part 2: Samples containing... | |
| Nuclear fuel technology \x97 Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography Part 1: Samples containing... | |
| Open end blind rivets with break pull mandrel and countersunk head A2/A2 | |
| Open end blind rivets with break pull mandrel and countersunk head AIA/AIA | |
| Open end blind rivets with break pull mandrel and countersunk head AIA/St | |
| Open end blind rivets with break pull mandrel and Countersunk head ST/ST | |
| Open end blind rivets with break pull mandrel and protruding head A2/A2 | |
| Open end blind rivets with break pull mandrel and protruding head AIA/AIA | |
| Open end blind rivets with break pull mandrel and protruding head AIA/St | |
| Open end blind rivets with break pull mandrel and protruding head St/St | |
| Ophthalmic Implants - Ophthalmic Viscosurgical Devices | |
| Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety | |
| Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision | |
| Ophthalmic optics and instruments - Optical devices for low-vision aids | |
| Optics and photonics Diffractive optics Vocabulary | |
| Oscillation-Type Density Meters - Part 1: Laboratory Instruments | |
| Oscillation-Type Density Meters - Part 2: Process Instruments for Homogenous Liquids | |
| Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l | |
| Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l | |
| Packaging - Steel drums - Part 3: Inserted flange-type closure systems | |
| Packaging \x97 Sacks \x97 Determination of the friction of filled sacks | |
| Paints and varnishes - Artificial weathering including acidic deposition | |
| Paints and Varnishes - Bend Test (Cylindrical Mandrel) | |
| Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution | |
| Paints and Varnishes - Cupping Test | |
| Paints and varnishes - Determination of electrical conductivity and resistance | |
| Paints and varnishes - Determination of film hardness by pencil test | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithioc arbamate) (zineb) release rate by determination of the concentration... | |
| Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of... | |
| Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water | |
| Paints and varnishes - Determination of scratch resi st ance Part 2: Variable-loading method | |
| Paints and varnishes - Determination of scratch resistance Part 1: Constant-loading method | |
| Paints and varnishes - Examination and preparation of samples for testing | |
| Paints and Varnishes - Pendulum Damping Test | |
| Paints and varnishes - Surface-drying test - Ballotini method | |
| Paints and varnishes - Testing of formaldehyde-emittin g coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber | |
| Paints and varnishes \x97 Determination of release rate of biocides from antifouling paints \x97 Part 4: Determination of pyridine-triphenylbo rane (PTPB) concentration in the extract and calculation of the release... | |
| Paints and varnishes \x97 Determination of release rate of biocides from antifouling paints Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract | |
| Paints and varnishes \x97 Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases | |
| Paints and varnishes Determination of release rate of biocides from antifouling paints Part 1: General method for extraction of biocides | |
| Paints and varnishes Determination of release rate of biocides from antifouling paints Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate | |
| Paints and Varnishes Standard Panels for Testing | |
| Paints, varnishes and binders Determination of MEQ value of water-based coating materials and binders | |
| Paints, varnishes and printing inks - Determination of fineness of grind | |
| Paints, Varnishes and Raw Materials for Paints and Varnishes - Sampling | |
| Paper and Board - Estimation of Contraries | |
| Passivation of corrosion-resistant stainless-steel fasteners | |
| Petroleum and natural gas industries - Aluminium alloy drill pipe | |
| Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology | |
| Petroleum and Natural Gas Industries - Materials for Use in H2S-Containing Environments in Oil and Gas Production - Part 1: General Principles for Selection of Cracking-Resistant Materials | |
| Petroleum and Natural Gas Industries - Offshore Production Installations - Heating, Ventilation and Air-Conditioning | |
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response | |
| Petroleum and Natural Gas Industries - Plate Heat Exchangers | |
| Petroleum and natural gas industries \x97 Drilling and production equipment \x97 Electric submersible pump systems for artificial lift | |
| Petroleum and natural gas industries \x97 Drilling and production equipment Part 1: Electric submersible pump systems for artificial lift | |
| Petroleum and natural gas industries \x97 Progressing cavity pumps systems for artificial lift \x97 Part 2: Surface drive systems | |
| Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe | |
| Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps | |
| Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines | |
| Petroleum, petrochemical and natural gas industries - Life cycle costing | |
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers | |
| Petroleum, petrochemical and natural gas industries \x96 Cathodic protection of pipeline systems Part 1: On-land pipelines | |
| Petroleum, petrochemical and natural gas industries \x97 Plate-type heat exchangers \x97 Part 2: Brazed aluminium plate-fin heat exchangers | |
| Petroleum, petrochemical and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast... | |
| Petroleum, petrochemical and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | |
| Pipework - Stripwound metal hoses and hose assemblies | |
| Plastic containers for intravenous injection | |
| Plastics - Cellulose Acetate - Determination of Insoluble Particles | |
| Plastics - Cellulose Acetate - Determination of Light Absorption on Moulded Specimens Produced Using Different Periods of Heating | |
| Plastics - Cellulose Acetate - Determination of Viscosity Loss on Moulding | |
| Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods | |
| Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection | |
| Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications | |
| Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds | |
| Plastics - Unplasticized Cellulose Acetate - Determination of Acetic Acid Yield | |
| Plastics \x96 Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions \x96 Method by analysis of released biogas | |
| Plastics \x97 Determination of linear dimensions of test specimens | |
| Plastics \x97 Film and sheeting \x97 Determination of water vapour transmission rate \x97 Part 1: Humidity detection sensor method | |
| Plastics \x97 Film and sheeting \x97 Determination of water vapour transmission rate \x97 Part 3: Electrolytic detection sensor method | |
| Plastics Determination of water content | |
| Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance | |
| Plastics Film and sheeting Determination of water vapour transmission rate Part 2: Infrared detection sensor method | |
| Plastics piping systems for hot and cold water installations - Chlorinated poly (vinyl chloride) (PVC-C) Part 1: General | |
| Plastics piping systems for hot and cold water installations - Chlorinated poly (vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General | |
| Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations - Polybutylene (PB) Part 1: General | |
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations \x96 Polypropylene (PP) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations \x97 Crosslinked polyethylene (PE-X) \x97 Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations \x97 Crosslinked polyethylene (PE-X) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations \x97 Crosslinked polyethylene (PE-X) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations \x97 Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations \x97 Polybutene (PB) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations \x97 Polybutene (PB) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations \x97 Polybutene (PB) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations \x97 Polypropylene (PP) \x97 Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations \x97 Polypropylene (PP) Part 1: General | |
| Plastics piping systems for hot and cold water installations \x97 Polypropylene (PP) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General | |
| Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5:Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General | |
| Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 1: General | |
| Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 1: General | |
| Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 2: Pipes | |
| Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 3: Fittings | |
| Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for industrial applications - Acrylonitrile- butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series | |
| Plastics piping systems for industrial applications - Acrylonitrile-butadi ene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series | |
| Plastics piping systems for industrial applications \x96 Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) \x96 Metric series for specifications for components and... | |
| Plastics piping systems for industrial applications Acrylonitrile- butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series | |
| Plastics piping systems for industrial applications Polybutene (PB), polyethylene (PE) and polypropylene (PP) Specifications for components and the system Metric series | |
| Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Plastics Polyketone (PK) moulding and extrusion materials Part 1: Designation system and basis for specifications | |
| Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties | |
| Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) | |
| Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) | |
| Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs | |
| Protective clothing for firefighters \x96 Laboratory test methods and performance requirements for wildland firefighting clothing | |
| Pulp, Paper and Board - Determination of 7 Specified Polychlorinated Biphenyls (PCB) | |
| Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract | |
| Qualification Testing of Welders for Under-Water Welding - Part 1: Diver-Welders for Hyperbaric Wet Welding | |
| Qualification Testing of Welders for Under-Water Welding - Part 2: Diver-Welders and Welding Operators for Hyperbaric Dry Welding | |
| Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremities | |
| Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets | |
| Reinforced plastics - Determination of the in-plane shear modulus by the plate twist method | |
| Road vehicles - Vehicle to grid communication interface Part 20: 2nd generation network layer and application layer requirements | |
| Road vehicles - Vehicle to grid communication interface Part 3: Physical and data link layer requirements | |
| Road vehicles - Vehicle to grid communication interface Part 4: Network and application protocol conformance test | |
| Road vehicles - Vehicle to grid communication interface Part 8: Physical layer and data link layer requirements for wireless communication | |
| Road vehicles - Vehicle to grid communication interface Part 9: Physical and data link layer conformance test for wireless communication | |
| Road vehicles \x97 Vehicle to grid communication interface Part 10: Physical layer and data link layer requirements for single-pair Ethernet | |
| Road vehicles \x97 Vehicle to grid communication interface Part 1: General information and use-case definition | |
| Road vehicles \x97 Vehicle to grid communication interface Part 21: Common 2nd generation network layer and application layer requirements conformance test plan | |
| Road vehicles \x97 Vehicle to grid communication interface Part 5: Physical layer and data link layer conformance test | |
| Road vehicles \x97 Vehicle-to-Grid Communication Interface Part 2: Network and application protocol requirements | |
| Seal-less rotodynamic pumps - Class II - Specification | |
| Seal-less rotodynamic pumps Class II Specification | |
| Ships and Marine Technology - Fire Resistance of Hose Assemblies - Requirements for the Test Bench | |
| Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods | |
| Ships and Marine Technology - Pressure/Vacuum Valves for Cargo Tanks | |
| Ships and marine technology \x97 Drainage systems on ships and marine structures \x97 Part 1: Sanitary drainage-system design | |
| Ships and marine technology \x97 Drainage systems on ships and marine structures \x97 Part 2: Sanitary drainage, drain piping for gravity system | |
| Ships and marine technology \x97 Drainage systems on ships and marine structures \x97 Part 3: Sanitary drainage, drain piping for vacuum system | |
| Ships and marine technology \x97 Drainage systems on ships and marine structures \x97 Part 4: Sanitary drainage, sewage disposal pipes | |
| Ships and marine technology \x97 Drainage systems on ships and marine structures \x97 Part 5: Drainage of decks, cargo spaces and swimming pools | |
| Ships and marine technology \x97 Potable water supply on ships and marine structures \x97 Part 1: Planning and design | |
| Ships and marine technology \x97 Potable water supply on ships and marine structures \x97 Part 2: Method of calculation | |
| Slotted Pan Head Screws - Product Grade A | |
| Small craft - Bilge-pumping systems | |
| Small Craft - Inboard Petrol Engines - Engine-Mounted Fuel and Electrical Components | |
| Small craft - Man-overboard prevention and recovery | |
| Small craft - Remote steering systems for inboard mini jet boats | |
| Small craft \x97 Bilge-pumping systems | |
| Small craft Anchoring, mooring and towing Strong points | |
| Small craft Man-overboard prevention and recovery | |
| Soil and waste \x97 Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection | |
| Soil quality - Characterization of soil related to groundwater protection | |
| Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination | |
| Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials | |
| Soil quality \x96 Determination of potential nitrification and inhibition of nitrification \x96 Rapid test by ammonium oxidation | |
| Soil quality \x96 Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions | |
| Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test | |
| Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience | |
| Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding | |
| Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification Part 6: Laser-arc hybrid welding | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding | |
| Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys... | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding | |
| Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to Tube-Plate Joints | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys | |
| Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 3: Fusion welding of non-alloyed and low-alloyed cast irons | |
| Specification and qualification of welding procedures for metallic materials \x97 Welding procedure test \x97 Part 6: Arc and gas welding of copper and its alloys | |
| Specification and qualification of welding procedures for metallic materials General rules | |
| Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables | |
| Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding | |
| Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding | |
| Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Resistance butt and flash welding | |
| Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys | |
| Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) | |
| Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) | |
| Steel cord conveyor belts - Part 2: Preferred belt types | |
| Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations | |
| Steel cord conveyor belts - Part 4: Vulcanized belt joints | |
| Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use | |
| Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 1: Reinforcing Bars, Wire Rod and Wire | |
| Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 2: Welded Fabric | |
| Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel | |
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries | |
| Sterilization of health care products Chemical indicators Guidance for selection, use and interpretation of results | |
| Technical Drawings Symbolic Presentation and Indication of Adhesive, Fold and Pressed Joints | |
| Test dusts for evaluating air cleaning equipment | |
| Textiles - Method for Assessing Appearance of Apparel and Other Textile End Products After Domestic Washing and Drying | |
| Textiles Industrial washing and finishing procedures for testing of workwear | |
| Textiles Measurement of water vapour permeability of textiles for the purpose of quality control | |
| Title Absent | |
| Tracked Changes (Redline) - Absorbent incontinence products for urine and/or faeces \x97 Basic principles for evaluation of single-use adult products from the perspective of users and caregivers | |
| Tracked Changes (Redline) - Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method | |
| Tracked Changes (Redline) - Binders for paints and varnishes - Determination of turbidity | |
| Tracked Changes (Redline) - Dentistry - Dental tweezers | |
| Tracked Changes (Redline) - Dentistry \x97 Casting and baseplate waxes | |
| Tracked Changes (Redline) - Fasteners \x96 Hexagon washer head drilling screws with tapping screw thread | |
| Tracked Changes (Redline) - Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices | |
| Tracked Changes (Redline) - Gas cylinders \x97 Parallel threads for connection of valves to gas cylinders \x97 Part 1: Specification | |
| Tracked Changes (Redline) - Gas cylinders \x97 Specifications and testing of LPG cylinder valves \x97 Manually operated | |
| Tracked Changes (Redline) - Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices | |
| Tracked Changes (Redline) - General requirements for establishing anthropometric databases | |
| Tracked Changes (Redline) - In vitro diagnostic test systems - Requirements for bloodglucose monitoring systems for self-testing in managing diabetes mellitus | |
| Tracked Changes (Redline) - Indoor air - Part 9: Determination of the emission of volatile organic compounds from samples of building products and furnishing \x97 Emission test chamber method | |
| Tracked Changes (Redline) - Industrial valves - Measurement, test and qualification procedures for fugitive emissions Part 2: Production acceptance test of valves | |
| Tracked Changes (Redline) - Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures | |
| Tracked Changes (Redline) - Leather - Tests for colour fastness - Colour fastness to migration into polymeric material | |
| Tracked Changes (Redline) - Medical devices \x97 Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements | |
| Tracked Changes (Redline) - Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel | |
| Tracked Changes (Redline) - Metallic materials - Method of testfor the determination of quasistatic fracture toughness of welds | |
| Tracked Changes (Redline) - Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using realtime RT-PCR Part 1: Method for quantification | |
| Tracked Changes (Redline) - Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. - Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count... | |
| Tracked Changes (Redline) - Microbiology of the food chain \x97 Horizontal method for the detection and enumeration of Clostridium spp. \x97 Part 2: Enumeration of Clostridium perfringens by colony-count technique... | |
| Tracked Changes (Redline) - Natural gas \x96 Energy determination | |
| Tracked Changes (Redline) - Non-destructive testing - Radiation methods for computed tomography - Part 1: Vocabulary | |
| Tracked Changes (Redline) - Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification | |
| Tracked Changes (Redline) - Non-destructive testing \x96 Eddy current testing \x96 General principles | |
| Tracked Changes (Redline) - Non-destructive testing \x97 Radiation methods for computed tomography \x97 Part 2: Principles, equipment and samples | |
| Tracked Changes (Redline) - Non-destructive testing \x97 Radiation methods for computed tomography \x97 Part 3: Operation and interpretation | |
| Tracked Changes (Redline) - Non-destructive testing of welds - Time-offlight diffraction technique (TOFD) - Acceptance levels | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines | |
| Tracked Changes (Redline) - Packaging \x97 Steel drums \x97 Part 3: Inserted flange-type closure systems | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of scratch resistance Part 1: Constant-loading method | |
| Tracked Changes (Redline) - Paints and varnishes - Determination of scratch resistance Part 2: Variable-loading method | |
| Tracked Changes (Redline) - Paints and varnishes - Pendulum damping test | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Determination of electrical conductivity and resistance | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Determination of film hardness by pencil test | |
| Tracked Changes (Redline) - Paints and varnishes \x97 Standard panels for testing | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Drilling and production equipment - Electric submersible pump systems for artificial lift | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Materials for use in H2S -con taining environments in oil and gas production Part 1: General principles for selection of... | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning | |
| Tracked Changes (Redline) - Plastic containers for intravenous injections | |
| Tracked Changes (Redline) - Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods | |
| Tracked Changes (Redline) - Plastics - Determination of average molecular weight and molecular weight distribution of polymers using sizeexclusion chromatography Part 5: Light-scattering method | |
| Tracked Changes (Redline) - Plastics - Determination of water content | |
| Tracked Changes (Redline) - Plastics piping systems for hot and cold water installations - Polybutene (PB) Part 3: Fittings | |
| Tracked Changes (Redline) - Plastics piping systems for hot and cold water installations - Polybutene (PB) Part 5: Fitness for purpose of the system | |
| Tracked Changes (Redline) - Plastics piping systems for industrial applications \x96 Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) \x96 Metric series for... | |
| Tracked Changes (Redline) - Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) | |
| Tracked Changes (Redline) - Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs | |
| Tracked Changes (Redline) - Qualification testing of weldersfor underwater welding Part 1: Hyperbaric wet welding | |
| Tracked Changes (Redline) - Radiological protection \x97 Procedures for monitoring the dose to the lens of the eye, the skin and the extremities | |
| Tracked Changes (Redline) - Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test | |
| Tracked Changes (Redline) - Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements | |
| Tracked Changes (Redline) - Small craft - Anchoring, mooring and towing - Strong points | |
| Tracked Changes (Redline) - Small craft - Bilge-pumping systems | |
| Tracked Changes (Redline) - Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components | |
| Tracked Changes (Redline) - Small craft \x97 Protection from falling overboard and means of reboarding | |
| Tracked Changes (Redline) - Soil and waste - Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection | |
| Tracked Changes (Redline) - Soil quality - Characterization of contaminated soil related to groundwater protection | |
| Tracked Changes (Redline) - Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel... | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 8: Welding of tubes to tube-plate joints | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials \x97 Qualification based on previous welding experience | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials \x97 Welding procedure specification Part 1: Arc welding | |
| Tracked Changes (Redline) - Specification and qualification of welding procedures for metallic materials \x97 Welding procedure test Part 2: Arc welding of aluminium and its alloys | |
| Tracked Changes (Redline) - Steel cord conveyor belts Part 3: Special safety requirements for belts for use in underground installations | |
| Tracked Changes (Redline) - Steel for the reinforcement and prestressing of concrete - Test methods Part 1: Reinforcing bars, rods and wire | |
| Tracked Changes (Redline) - Steel for the reinforcement and prestressing of concrete - Test methods Part 2: Welded fabric and lattice girders | |
| Tracked Changes (Redline) - Textiles \x96 Industrial washing and finishing procedures for testing of workwear | |
| Tracked Changes (Redline) - Textiles \x96 Method for assessing appearance of apparel and other textile end products after domestic washing and drying | |
| Tracked Changes (Redline) - Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) | |
| Tracked Changes (Redline) - Washer-disinfectors \x97 Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers | |
| Tracked Changes (Redline) - Washer-disinfectors Part 1: General requirements, terms and definitions and tests | |
| Tracked Changes (Redline) - Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for critical and semi-critical medical devices | |
| Tracked Changes (Redline) - Washer-disinfectors Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes | |
| Tracked Changes (Redline) - Washer-disinfectors Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment | |
| Tracked Changes (Redline) - Washer-disinfectors Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-critical thermolabile medical devices and healthcare equipment | |
| Tracked Changes (Redline) - Welding - Friction welding of metallic materials | |
| Tracked Changes (Redline) \x96 Road vehicles - Vehicle to grid communication interface Part 1: General information and use-case definition | |
| Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) | |
| Urine-Absorbing Aids - Basic Principles for Evaluation of Single-Use Adult-Incontinence-A bsorbing Aids from the Perspective of Users and Caregivers | |
| UV-C Devices \x97 Safety information \x97 Permissible human exposure | |
| Vitreous and Porcelain Enamels - Determination of Scratch Resistance of Enamel Finishes | |
| Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes | |
| Washer-disinfectors Part 1: General requirements, terms and definitions and tests | |
| Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. | |
| Washer-disinfectors Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers | |
| Washer-disinfectors Part 5: Performance requirements and test method criteria for demonstrating cleaning efficacy | |
| Washer-disinfectors Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment | |
| Washer-disinfectors Part 7: Requirements and tests for washerdisinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment | |
| Water Quality - Determination of Chloride by Flow Analysis (CFA and FIA) and Photometric or Potentiometric Detection | |
| Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) | |
| Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization | |
| Water Quality - Digestion for the Determination of Selected Elements in Water - Part 1: Aqua Regia Digestion | |
| Water Quality - Digestion for the Determination of Selected Elements in Water - Part 2: Nitric Acid Digestion | |
| Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests | |
| Water quality \x97 Determination of selected parameters by discrete analysis systems Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection | |
| Water quality \x97 Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio) | |
| Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 1: Method by flow injection analysis (FIA) | |
| Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace | |
| Water quality Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption | |
| Welding - Friction Welding of metallic Materials | |
| Welding - Grouping system for metallic materials | |
| Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys | |
| Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel | |
| Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld |
| << Prev | Next >> |