Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
361
362
363
364
365
366
367
368
369
370
371
372
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Attachment materials for electronic assembly Part 1-3: Requirements for electronic grade solder alloys and fluxed and nonfluxed solid solder for electronic soldering applications | |
| Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-2: Particular requirements \x96 Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-3: Particular requirements \x96 Slotted cable trunking systems intended for installation in cabinets | |
| Cable trunking systems and cable ducting systems for electrical installations Part 2-4: Particular requirements \x96 Service poles and service posts | |
| Calibration of Fibre-Optic Power Meters | |
| Capacitors for power electronics | |
| Circuit boards and circuit board assemblies - Design and use Part 6-2: Land pattern design - Description of land pattern for the most common surface mounted components (SMD) | |
| Circuit boards and circuit board assemblies - Design and use Part 6-3: Land pattern design - Description of land pattern for through hole components (THT) | |
| Circuit boards and circuit board assemblies \x97 Design and use Part 6-1: Land pattern design \x97 Generic requirements for land pattern on circuit boards | |
| Classification of insulating liquids | |
| Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V -... | |
| Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um =... | |
| Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2... | |
| Compression and mechanical connectors for power cables Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2... | |
| Conduit systems for cable management Part 21: Particular requirements - Rigid conduit systems | |
| Conduit systems for cable management Part 22: Particular requirements - Pliable conduit systems | |
| Conduit systems for cable management Part 23: Particular requirements - Flexible conduit systems | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-010: Circular connectors - Detail specification for connectors with outer or inner push-pull locking mechanism, based on mating interfaces according... | |
| Connectors for electrical and electronic equipment - Product Requirements Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC... | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | |
| Connectors for electrical and electronic equipment - Product requirements Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission,... | |
| Connectors for electrical and electronic equipment - Product requirements Part 3-124: Rectangular connectors - Detail Specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies... | |
| Connectors for electrical and electronic equipment \x96 Product requirements \x96 Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking | |
| Connectors for electrical and electronic equipment \x96 Product requirements Part 3-119: Rectangular connectors \x96 Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial... | |
| Connectors for electrical and electronic equipment \x96 Product requirements Part 3-126: Rectangular connectors \x96 Detail specification for 5-way power connectors for industrial environments with push-pull locking push-pull locking | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 2-011: Circular connectors \x97 Detail specification for B12 bayonet coupling connectors based on mating interfaces according to IEC 61076-2-101 and... | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 2-114: Circular connectors \x97 Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission... | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 2-116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500... | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 8-100: Power connectors \x97 Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic... | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 8-101: Power connectors \x97 Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic... | |
| Connectors for electrical and electronic equipment \x97 Product requirements Part 8-102: Power connectors \x97 Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic... | |
| Controlgear for electric light sources - Safety Part 2-10: Particular requirements - Electronic controlgear for high-frequency operation of tubular cold-cathode discharge lamps (neon tubes) | |
| Controlgear for electric light sources - Safety Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires | |
| Controlgear for electric light sources - Safety Part 2-12: Particular requirements - DC or AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) | |
| Controlgear for electric light sources - Safety Part 2-13: Particular requirements - Electronic controlgear for LED light sources | |
| Controlgear for electric light sources - Safety Part 2-1: Particular requirements - Starting devices (other than glow starters) | |
| Controlgear for electric light sources - Safety Part 2-2: Particular requirements - Electronic step-down convertors for filament lamps | |
| Controlgear for electric light sources - Safety Part 2-3: Particular requirements - AC or DC supplied electronic controlgear for fluorescent lamps | |
| Controlgear for electric light sources - Safety Part 2-8: Particular requirements - Ballasts for fluorescent lamps | |
| Controlgear for electric light sources \x97 Safety Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements Part 3\x962: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial... | |
| Electrical equipment for measurement, control and laboratory use \x97 EMC requirements Part 2-3: Particular requirements \x97 Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal... | |
| Electrical equipment for measurement, control and laboratory use \x97 EMC requirements Part 2-4: Particular requirements \x97 Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC... | |
| Electrical equipment for measurement, control and laboratory use \x97 EMC requirements Part 2-5: Particular requirements \x97 Test configurations, operational conditions and performance criteria for field devices with field bus interfaces... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 6:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.. Equipment for testing, measuring or monitoring of protective measures Part 7: Phase... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 10:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 13:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 14:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 16:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 17:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 2:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 4:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures Part 5:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x97 Equipment for testing, measuring or monitoring of protective measures Part 11:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x97 Equipment for testing, measuring or monitoring of protective measures Part 12:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x97 Equipment for testing, measuring or monitoring of protective measures Part 3:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x97 Equipment for testing, measuring or monitoring of protective measures Part 9:... | |
| Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft | |
| Electromechanical contactors for household and similar purposes | |
| Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification | |
| Electronic railway equipment - Train communication network (TCN) Part 2-6: On-board to ground communication | |
| Electronic railway equipment \x97 Train communication network (TCN) Part 2-8: TCN conformance test | |
| Electrostatics Part 4-11: Standard test methods for specific applications - Testing of electrostatic properties of composite IBC | |
| Electrostatics Part 4-3: Standard test methods for specific applications - Footwear | |
| Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Electrostatics Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person | |
| Electrostatics Part 4-6: Standard test methods for specific applications \x97 Wrist straps | |
| Electrostatics Part 4-7: Standard test methods for specific applications - Ionization | |
| Electrostatics Part 4-9: Standard test methods for specific applications - Garments - Resistive characterization | |
| Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Electrostatics Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices | |
| Electrostatics Part 6-1: Electrostatic control for healthcare - General requirements for facilities | |
| Electrostatics Part 6-1: Electrostatic control in healthcare, commercial and public facilities - Healthcare | |
| Equipment for general lighting purposes - EMC immunity requirements | |
| Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests and and constancy tests \x97 Imaging performance of computed tomography X-ray equipment | |
| Evaluation and routine testing in medical imaging departments Part 3-6: Acceptance and constancy tests \x97 Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation | |
| Evaluation and routine testing in medical imaging departments Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography | |
| Evaluation and routine testing in medical imaging departments Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiography and radioscopy | |
| Expression of performance of gas analyzers Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors | |
| Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics | |
| Fibre optic communication subsystem test procedures Part 1-4: General communication subsystems - Light source encircled flux measurement method | |
| Fibre optic communication subsystem test procedures Part 2-13: Digital systems - Measurement of error vector magnitude | |
| Fibre optic communication subsystem test procedures Part 2-8: Digital systems \x97 Determination of low BER using Q-factor measurements | |
| Fibre optic communication subsystem test procedures Part 4-3: Installed passive optical networks - Attenuation and optical return loss measurements | |
| Fibre optic communication subsystem test procedures Part 4\x961: Installed cable plant - Multimode attenuation measurement | |
| Fibre optic communication subsystems Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-11: Tests - Axial compression | |
| Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 2-18: Tests - Dry Heat | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-1: Tests - Vibration (sinusoidal) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-22: Tests - Change of temperature | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-27: Tests - Dust (laminar flow) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-46: Tests - Damp heat cyclic | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-5 : Tests - Torsion | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-54: Tests - Corrosive atmosphere (mixed gas) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-5: Tests - Torsion | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-6: Tests - Tensile strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-21: Examinations and measurements - Switching time | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-4: Examination and measurements - Attenuation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components... | |
| Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures Part 2-4: Tests \x96 Fibre or cable retention | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 2-10: Tests \x97 Crush and load resistance | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 2-14: Tests \x97 High optical power | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 2-34: Tests \x97 Resistance to solvents and contaminating fluids | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 2-44: Tests \x97 Flexing of the strain relief of fibre optic devices and components | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 2-56: Tests \x97 Wind resistance of mounted housing | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 3-30: Examinations and measurements \x97 Endface geometry of rectangular ferrule | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 3-35: Examinations and measurements \x97 Visual inspection of fibre optic connectors and fibre-stub transceivers | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 3-53: Examinations and measurements \x97 Encircled angular flux (EAF) measurement method based on two-dimensional far field... | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 3-54: Examinations and measurements \x97 Angular misalignment between ferrule bore axis and ferrule axis for cylindrical... | |
| Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures Part 3-55: Examinations and measurements \x97 Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical... | |
| Fibre-optic communication subsystem test procedures Part 4-1: Installed cabling plant - Multimode attenuation measurement | |
| Fibre-optic communication subsystem test procedures Part 4-2: Installed cabling plant \x97 Single-mode attenuation and optical return loss measurements | |
| Fibre-optic communication subsystem test procedures Part 4-5: Installed cabling plant \x97 Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces | |
| Fluorescent ultraviolet lamps used for tanning - Measurement and specification method | |
| Gas analyzers - Expression of performance Part 3: Paramagnetic oxygen analyzers | |
| Guide to specification of hydraulic turbine governing systems | |
| Identification Link Part 1: General requirements | |
| Identification link Part 2: Types/models, lots/batches, items and characteristics | |
| Industrial Cable Reels | |
| Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Industrial communication networks - Fieldbus specifications Part 2: Physical layer specification and service definition | |
| Industrial communication networks - Fieldbus specifications Part 3-12: Data-link layer service definition - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-19: Data-link layer service definition - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-21: Data-link layer service definition - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-25: Data-link layer service definition - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-2: Data-link layer service definition - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 3-4: Data-link layer service definition - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-12: Data-link layer protocol specification - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-19: Data-link layer protocol specification - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-21: Data-link layer protocol specification - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-24: Data-link layer protocol specification - Type 24 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-25: Data-link layer protocol specification - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-28: Data-link layer protocol specification - Type 28 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-2: Data-link layer protocol specification - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-3: Data-link layer protocol specification - Type 3 elements | |
| Industrial communication networks - Fieldbus specifications Part 4-4: Data-link layer protocol specification - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-10: Application layer service definition - Type 10 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-12: Application layer service definition - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-19: Application layer service definition - Type 19 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-21: Application layer service definition - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-23: Application layer service definition - Type 23 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-24: Application layer service definition - Type 24 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-25: Application layer service definition - Type 25 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-26: Application layer service definition - Type 26 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-27: Application layer service definition - Type 27 elements | |
| Industrial communication networks - Fieldbus specifications Part 5-4: Application layer service definition - Type 4 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-10: Application layer protocol specification - Type 10 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-12: Application layer protocol specification - Type 12 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-19: Application layer protocol specification - Type 19 elements | |
| Industrial Communication Networks - Fieldbus Specifications Part 6-21: Application layer protocol specification - Type 21 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-24: Application layer protocol specification - Type-24 Elements | |
| Industrial communication networks - Fieldbus specifications Part 6-27: Application layer protocol specification - Type 27 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-28: Application layer protocol specification - Type 28 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-2: Application layer protocol specification - Type 2 elements | |
| Industrial communication networks - Fieldbus specifications Part 6-3: Application layer protocol specification - Type 3 elements | |
| Industrial communication networks \x96 Fieldbus specifications Part 6-23: Application layer protocol specification \x96 Type 23 elements | |
| Industrial communication networks \x96 Fieldbus specifications Part 6-25: Application layer protocol specification \x96 Type 25 elements | |
| Industrial communication networks \x96 Fieldbus specifications Part 6-26: Application layer protocol specification \x96 Type 26 elements | |
| Industrial communication networks \x97 Fieldbus specifications Part 3-24: Data-link layer service definition \x97 Type 24 elements | |
| Industrial communication networks \x97 Fieldbus specifications Part 3-28: Data-link layer service definition \x97 Type 28 elements | |
| Industrial communication networks \x97 Fieldbus specifications Part 5-28: Application layer service definition \x97 Type 28 elements | |
| Industrial communication networks \x97 Fieldbus specifications Part 6-4: Application layer protocol specification \x97 Type 4 elements | |
| Industrial networks - Single-drop digital communication interface Part 2: Functional safety extensions | |
| Industrial networks - Single-drop digital communication interface Part 3: Wireless extensions | |
| Installation couplers intended for permanent connection in fixed installations | |
| Instruments and software used for measurement in high-voltage and high-current tests Part 3: Requirements for hardware for tests with alternating and direct voltages and currents | |
| Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state | |
| Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria | |
| Lamp controlgear Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps | |
| Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment | |
| Live working - Minimum approach distances Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV | |
| Live working - Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods - Method 1: Determination of the arc rating (ELIM, ATPV and/or EBT) of... | |
| Live working - Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV AC | |
| Low-voltage switch mode power supplies Part 3: Electromagnetic compatibility (EMC) | |
| Low-voltage switch mode power supplies Part 7: Safety requirements | |
| Low-voltage switchgear and controlgear assemblies Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies | |
| Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO) | |
| Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks | |
| Low-voltage switchgear and controlgear assemblies Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 2: Single Talker and Multiple Listeners, High-Speed Transmission | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces Part 450: Multiple talkers and multiple listeners \x96 Ethernet interconnection | |
| Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security | |
| Maritime navigation and radiocommunication equipment and systems \x97 Digital interfaces Part 1: Single talker and multiple listeners | |
| Maritime navigation and radiocommunication equipment and systems \x97 Global navigation satellite systems (GNSS) Part 5: BeiDou navigation satellite system (BDS) \x97 Receiver equipment \x97 Performance requirements, methods of testing and... | |
| Marking of electrical equipment with ratings related to electrical supply - Safety requirements | |
| Marking on ferrite cores | |
| Materials for printed boards and other interconnecting structures Part 2-45: Reinforced base materials clad and unclad - Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1.0W/m K) and... | |
| Materials for printed boards and other interconnecting structures Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1.5W/m K) and... | |
| Materials for printed boards and other interconnecting structures Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m\x95K) and... | |
| Materials for printed boards and other interconnecting structures Part 2-51: Reinforced base materials, clad and unclad - Base materials for integrated circuit card carrier tape, unclad | |
| Materials for printed boards and other interconnecting structures Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from "E" glass for printed boards | |
| Nuclear facilities - Instrumentation and control systems - Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use during normal operation and anticipated operational... | |
| Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing category A functions | |
| Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Categorization of functions and classification of systems | |
| Nuclear power plants \x97 Instrumentation, control and electrical power systems \x97 Requirements for static uninterruptible DC and AC power supply systems | |
| Optical amplifiers - Test methods Part 1: Power and gain parameters | |
| Optical amplifiers \x96 Test methods Part 4-4: Gain transient parameters \x96 Single channel optical amplifiers with gain control | |
| Optical amplifiers \x97 Test methods Part 1-1: Power and gain parameters \x97 Optical spectrum analyzer method | |
| Optical amplifiers \x97 Test methods Part 1-3: Power and gain parameters \x97 Optical power meter method | |
| Optical amplifiers \x97 Test methods Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control | |
| Optical amplifiers Part 1: Generic specification | |
| Optical amplifiers Part 2: Single channel applications \x97 Performance specification template | |
| Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting | |
| Printed Board Assemblies Part 1: Generic Specification - Requirements for Soldered Electrical and Electronic Assemblies Using Surface Mount and Related Assembly Technologies | |
| Printed boards and printed board assemblies - Design and use Part 6-4: Land pattern design - Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of... | |
| Programmable controllers Part 10: PLC open XML exchange format | |
| Programmable controllers Part 3: Programming languages | |
| Programmable controllers Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | |
| Radiation protection instrumentation - Installed personnel surface contamination monitors | |
| Radio frequency connectors Part 1-5: Electrical test methods \x97 Rise time degradation | |
| Radio frequency connectors Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 O (type 0,8) | |
| Radio frequency connectors Part 67: Sectional specification for series TRL threaded triaxial connectors | |
| Radio- frequency connectors Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 O (Type... | |
| Radio-frequency connectors Part 1-2: Electrical test methods - Insertion loss | |
| Radio-frequency connectors Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient | |
| Radio-frequency connectors Part 1-6: Electrical test methods - RF power | |
| Radio-frequency connectors Part 1-9: Mechanical test methods - Safety wire hole pull-out | |
| Radio-frequency connectors Part 15: Sectional specification \x97 RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling \x97 Characteristic impedance 50 O (type SMA)... | |
| Radio-frequency connectors Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)... | |
| Radio-frequency connectors Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling - Characteristic impedance 50 ohms (Type SC) | |
| Radio-frequency connectors Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3,5 mm (0,1378 in) | |
| Radio-frequency connectors Part 24: Sectional specification \x97 Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F) | |
| Radio-frequency connectors Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock \x97 Characteristic impedance 50 O (type 7-16) | |
| Radio-frequency connectors Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 O, series 4,3-10 | |
| Radio-frequency connectors Part 60: Sectional specification for RF coaxial connectors with push on mating - Characteristic impedance 50 Ohm (type SMPM) | |
| Radio-frequency connectors Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5 | |
| Radio-frequency connectors Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)... | |
| Radio-frequency connectors Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 O | |
| Radio-frequency connectors Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 O (series 2,2-5) | |
| Radio-frequency connectors Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors | |
| Radio-frequency connectors Part 69: Sectional specification for RF coaxial connectors with push on mating \x97 Characteristic impedance 50 ? (type SMP3) | |
| Radio-frequency connectors Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors \x97 Characteristic Impedance 75 O | |
| Radio-frequency connectors Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm - Characteristic impedance 50 Ohms - type NEX10 | |
| Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service | |
| Reliability stress screening Part 2: Components | |
| Reliability testing - Compliance test plans for success ratio | |
| Reliability testing - Compliance tests for constant failure rate and constant failure intensity | |
| Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility | |
| Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR) | |
| Safety of machinery \x97 Electrosensitive protective equipment Part 1: General requirements and tests | |
| Safety of machinery \x97 Electrosensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) | |
| Safety of transformers, reactors, power supply units and combination thereof Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding... | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units... | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-1: Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-20: Particular requirements and tests for small reactors | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-091: Particular requirements for cabinet x-ray systems | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-202: Particular requirements for electrically operated valve actuators | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for equipment intended to be used in educational establishments by children | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-120: Particular safety requirements for machinery aspects of equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-201: Particular requirements for control equipment | |
| Switches for appliances Part 1: General requirements | |
| Switches for appliances Part 2-1: Particular requirements for cord switches | |
| Switches for appliances Part 2-4: Particular requirements for independently mounted switches | |
| Switches for appliances Part 2-5: Particular requirements for change-over selectors | |
| Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery | |
| Synthetic organic esters - Guidelines for maintenance and use in electrical equipment | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules - Design qualification and type approval Part 1: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x96 Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval Part 1: Test requirements | |
| Terrestrial photovoltaic (PV) modules \x97 Design qualification and type approval Part 2: Test procedures | |
| Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) | |
| Test methods for electrical materials, circuit boards and other interconnection structures and assemblies Part 2-720: Detection of defects in interconnection structures by measurement of capacitance | |
| Test methods for electrical materials, circuit boards and other interconnection structures and assemblies Part 2-809: X/Y coefficient of thermal expansion (CTE) test for thick base materials by TMA | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 2-630: Test methods for materials for interconnection structures \x96 Moisture absorption after pressure vessel conditioning | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 2-804: Test methods for time to delamination - T260, T288, T300 | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 2-808: Thermal resistance of an assembly by thermal transient method | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 5-502: General test methods for materials and assemblies \x97 Surface insulation resistance (SIR) testing of assemblies... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 5-503: General test method for materials and assemblies \x96 Conductive anodic filaments (CAF) testing of circuit... | |
| Test methods for electrical materials, printed board and other interconnection structures and assemblies Part 5-504: General test methods for materials and assemblies - Process ionic contamination testing (PICT) | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-501: Test methods for materials for interconnection structures - Measurement of resilience strength and resilience strength... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-801: Thermal conductivity test for base materials | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-803: Test methods for Z-axis expansion of base materials and printed boards | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-805: X/Y CTE test for thin base materials by TMA | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2-807: Test methods for materials for interconnection structures - Decomposition temperature (Td) using TGA | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-301: General test methods for materials and assemblies \x97 Soldering paste using fine solder particles | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-501: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of solder... | |
| Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-601: General test methods for materials and assemblies \x97 Reflow soldering ability test for solder joint,... | |
| Tracked Changes (Redline) - Attachment materials for electronic assembly Part 1-3: Requirements for electronic grade solder alloys and fluxed and nonfluxed solid solder for electronic soldering applications | |
| Tracked Changes (Redline) - Calibration of fibre-optic power meters | |
| Tracked Changes (Redline) - Capacitors for power electronics | |
| Tracked Changes (Redline) - Classification of insulating liquids | |
| Tracked Changes (Redline) - Composite hollow insulators \x97 Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage... | |
| Tracked Changes (Redline) - Conduit Systems for cable management - Part 22: Particular requirements \x97 Pliable conduit systems | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and... | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and data transmission... | |
| Tracked Changes (Redline) - Connectors for electrical and electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking | |
| Tracked Changes (Redline) - Controlgear for electric light sources - Safety - Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires | |
| Tracked Changes (Redline) - Controlgear for electric light sources - Safety - Part 2-12: Particular requirements - DC or AC supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) | |
| Tracked Changes (Redline) - Controlgear for electric light sources - Safety - Part 2-1: Particular requirements - Starting devices (other than glow starters) | |
| Tracked Changes (Redline) - Controlgear for electric light sources - Safety - Part 2-2: Particular requirements - Electronic step-down convertors for filament lamps | |
| Tracked Changes (Redline) - Controlgear for electric light sources - Safety - Part 2-3: Particular requirements - AC or DC supplied electronic controlgear for fluorescent lamps | |
| Tracked Changes (Redline) - Controlgear for electric light sources \x97 Safety \x97 Part 1: General requirements | |
| Tracked Changes (Redline) - Controlgear for electric light sources \x97 Safety \x97 Part 2-10: Particular requirements \x97 Electronic controlgear for high-frequency operation of tubular cold-cathode discharge lamps (neon tubes) | |
| Tracked Changes (Redline) - Controlgear for electric light sources \x97 Safety \x97 Part 2-13: Particular requirements \x97 Electronic controlgear for LED light sources | |
| Tracked Changes (Redline) - Controlgear for electric light sources \x97 Safety \x97 Part 2-8: Particular requirements \x97 Ballasts for fluorescent lamps | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive... | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable... | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers... | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation... | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field... | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use \x96 EMC requirements Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions... | |
| Tracked Changes (Redline) - Electrical equipment for measurement, control and laboratory use \x97 EMC requirements Part 1: General requirements | |
| Tracked Changes (Redline) - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of... | |
| Tracked Changes (Redline) - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of... | |
| Tracked Changes (Redline) - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC \x97 Equipment for testing, measuring or monitoring of... | |
| Tracked Changes (Redline) - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1 500 V d.c.. Equipment for testing, measuring or monitoring of protective measures... | |
| Tracked Changes (Redline) - Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft | |
| Tracked Changes (Redline) - Electromechanical switches for use in electrical and electronic equipment Part 1: Generic specification | |
| Tracked Changes (Redline) - Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps | |
| Tracked Changes (Redline) - Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization | |
| Tracked Changes (Redline) - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices | |
| Tracked Changes (Redline) - Electrostatics Part 4-3: Standard test methods for specific applications - Footwear | |
| Tracked Changes (Redline) - Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) | |
| Tracked Changes (Redline) - Electrostatics Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person | |
| Tracked Changes (Redline) - Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Tracked Changes (Redline) - Equipment for general lighting purposes - EMC immunity requirements | |
| Tracked Changes (Redline) - Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow) | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures \x97 Part 2-18: Tests - Dry heat | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-11: Tests - Axial compression | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures Part 2-46: Tests \x96 Damp heat, cyclic | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x96 Basic test and measurement procedures Part 2-4: Tests \x96 Fibre or cable retention | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-10: Tests \x97 Crush and load resistance | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-1: Tests \x97 Vibration (sinusoidal) | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-34: Tests \x97 Resistance to solvents and contaminating fluids | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-38: Tests \x97 Sealing for fibre optic sealed closures and hardened... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-43: Tests \x97Screen testing of return loss of single-mode PC optical... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-44: Tests \x97 Flexing of the strain relief of fibre optic... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 2-5: Tests \x97 Torsion | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 3-33: Examinations and measurements \x97 Withdrawal force from a resilient alignment... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 3-35: Examinations and measurements \x97 Visual inspection of fibre optic connectors... | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components \x97 Basic test and measurement procedures \x97 Part 3-4: Examinations and measurements \x97 Attenuation | |
| Tracked Changes (Redline) - Fibre-optic communication subsystem test procedures - Part 4-2: Installed cabling plant - Single-mode attenuation and optical return loss measurements | |
| Tracked Changes (Redline) - Fibre-optic communication subsystem test procedures Part 4-1: Installed cabling plant - Multimode attenuation measurement | |
| Tracked Changes (Redline) - Gas Analyzers \x97 Expression of performance Part 3: Paramagnetic oxygen analysers | |
| Tracked Changes (Redline) - Guidelines to specification of hydraulic turbine governing systems | |
| Tracked Changes (Redline) - Industrial cable reels | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type 24 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications - Part 5-26: Application layer service definition - Type 26 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type 24 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 3-12: Data-link layer service definition - Type 12 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 3-19: Data-link layer service definition - Type 19 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 3-21: Data-link layer service definition - Type 21 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 3-4: Data-link layer service definition - Type 4 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-12: Data-link layer protocol specification - Type 12 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-19: Data-link layer protocol specification - Type 19 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-21: Data-link layer protocol specification - Type 21 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-24: Data-link layer protocol specification - Type 24 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-2: Data-link layer protocol specification - Type 2 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-3: Data-link layer protocol specification - Type 3 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 4-4: Data-link layer protocol specification - Type 4 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 5-10: Application layer service definition - Type 10 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 5-12: Application layer service definition - Type 12 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 5-19: Application layer service definition - Type 19 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 5-21: Application layer service definition - Type 21 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 5-23: Application layer service definition - Type 23 elements | |
| Tracked Changes (Redline) - Industrial communication networks - Fieldbus specifications Part 5-4: Application layer service definition - Type 4 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x96 Fieldbus specifications - Part 6-26: Application layer protocol specification \x96 Type 26 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x96 Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Tracked Changes (Redline) - Industrial communication networks \x96 Fieldbus specifications Part 5\x962: Application layer service definition \x96 Type 2 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x96 Fieldbus specifications Part 6-23: Application layer protocol specification \x96 Type 23 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x96 Fieldbus specifications Part 6-3: Application layer protocol specification \x96 Type 3 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x97 Fieldbus specifications \x97 Part 3-2: Data-link layer service definition \x97 Type 2 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x97 Fieldbus specifications Part 6-10: Application layer protocol specification \x97 Type 10 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x97 Fieldbus specifications Part 6-12: Application layer protocol specification \x97 Type 12 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x97 Fieldbus specifications Part 6-21: Application layer protocol specification \x97 Type 21 elements | |
| Tracked Changes (Redline) - Industrial communication networks \x97 Fieldbus specifications Part 6-4: Application layer protocol specification \x97 Type 4 elements | |
| Tracked Changes (Redline) - Installation couplers intended for permanent connection in fixed installations | |
| Tracked Changes (Redline) - Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state | |
| Tracked Changes (Redline) - Insulators for overhead lines \x97 Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V \x97 Definitions, test methods... | |
| Tracked Changes (Redline) - Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment | |
| Tracked Changes (Redline) - Low-voltage switch mode power supplies Part 3: Electromagnetic compatibility (EMC) | |
| Tracked Changes (Redline) - Low-voltage switch mode power supplies Part 7: Safety requirements | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear assemblies \x97 Part 5: Assemblies for power distribution in public networks | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear assemblies Part 1: General rules | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces Part 450: Multiple talkers and multiple listeners \x96 Ethernet interconnection | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems \x96 Digital interfaces Part 460: Multiple talkers and multiple listeners \x96 Ethernet interconnection \x96 Safety and security | |
| Tracked Changes (Redline) - Materials for printed boards and other interconnecting structures - Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from "E" glass... | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing category A functions | |
| Tracked Changes (Redline) - Optical amplifiers - Test methods - Part 1: Power and gain parameters | |
| Tracked Changes (Redline) - Optical amplifiers \x97 Part 2: Single channel applications \x97 Performance specification template | |
| Tracked Changes (Redline) - Optical amplifiers Part 1: Generic specification | |
| Tracked Changes (Redline) - Printed board assemblies Part 1: Generic specification \x96 Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies | |
| Tracked Changes (Redline) - Programmable controllers - Part 3: Programming languages | |
| Tracked Changes (Redline) - Programmable controllers \x97 Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | |
| Tracked Changes (Redline) - Radiation protection instrumentation \x97 Installed personnel surface contamination monitors | |
| Tracked Changes (Redline) - Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 O... | |
| Tracked Changes (Redline) - Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service | |
| Tracked Changes (Redline) - Reliability testing - Compliance tests for constant failure rate and constant failure intensity | |
| Tracked Changes (Redline) - Safety of machinery - Electrosensitive protective equipment Part 3: Particular requirements for active opto-electronic protective devices responsive to diffuse Reflection (AOPDDR) | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combination thereof \x97 Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof \x97 Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof \x97 Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof \x97 Part 2-1: Particular requirements and tests for separating transformers and power supply units incorporating separating... | |
| Tracked Changes (Redline) - Safety of transformers, reactors, power supply units and combinations thereof \x97 Part 2-20: Particular requirements and tests for small reactors | |
| Tracked Changes (Redline) - Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-201: Particular requirements for control equipment | |
| Tracked Changes (Redline) - Switches for appliances Part 1: General requirements | |
| Tracked Changes (Redline) - Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery | |
| Tracked Changes (Redline) - Synthetic organic esters - Guidelines for maintenance and use in electrical equipment | |
| Tracked Changes (Redline) - Varistors for use in electronic equipment \x97 Part 2: Sectional specification for surge suppression varistors | |
| Tracked Changes (Redline) - Varistors for use in electronic equipment Part 1: Generic specification | |
| Tracked Changes (Redline) - Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines | |
| Tracked Changes (Redline) - Wind energy generation systems - Part 4: Design requirements for wind turbine gearboxes | |
| Tracked Changes (Redline) - Wind energy generation systems Part 21-1: Measurement and assessment of electrical characteristics \x96 Wind turbines | |
| Varistors for use in electronic equipment Part 1: Generic specification | |
| Varistors for use in electronic equipment Part 2: Sectional specification for surge suppression varistors | |
| Wind energy generation systems Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Wind energy generation systems Part 12-3: Power performance - Measurement based site calibration | |
| Wind energy generation systems Part 12-5: Power performance \x97 Assessment of obstacles and terrain | |
| Wind energy generation systems Part 12-6: Measurement based nacelle transfer function of electricity producing wind turbines | |
| Wind energy generation systems Part 12: Power performance measurements of electricity producing wind turbines \x97 Overview | |
| Wind energy generation systems Part 15-1: Site suitability input conditions for wind power plants | |
| Wind energy generation systems Part 1: Design requirements | |
| Wind energy generation systems Part 21-1: Measurement and assessment of electrical characteristics \x96 Wind turbines | |
| Wind energy generation systems Part 21-2: Measurement and assessment of electrical characteristics \x97 Wind power plants | |
| Wind energy generation systems Part 24: Lightning protection | |
| Wind energy generation systems Part 26-1: Availability for wind energy generation systems | |
| Wind energy generation systems Part 27-1: Electrical simulation models \x97 Generic models | |
| Wind energy generation systems Part 27-2: Electrical simulation models \x97 Model validation | |
| Wind energy generation systems Part 3-1: Design requirements for fixed offshore wind turbines | |
| Wind energy generation systems Part 3-2: Design requirements for floating offshore wind turbines | |
| Wind energy generation systems Part 4: Design requirements for wind turbine gearboxes | |
| Wind energy generation systems Part 50-1: Wind measurement \x97 Application of meteorological mast, nacelle and spinner mounted instruments | |
| Wind energy generation systems Part 50-2: Wind measurement - Application of ground-mounted remote sensing technology | |
| Wind energy generation systems Part 50-3: Use of nacelle-mounted lidars for wind measurements | |
| Wind energy generation systems Part 50: Wind measurement \x97 Overview | |
| Wind energy generation systems Part 5: Wind turbine blades | |
| Wind energy generation systems Part 6: Tower and foundation design requirements | |
| Wind energy generation systems Part 8: Design of wind turbine structural components |
| << Prev | Next >> |