Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
368
369
370
371
372
373
374
375
376
377
378
379
380
390
400
410
420
430
440
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Guidelines for Noise Control by Silencers | |
| Acoustics - Measurement and Parametric Description of Spatial Sound Distribution Curves in Workrooms for Evaluation of Their Acoustical Performance | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 6: Laboratory Measurements of Impact Sound Insulation of Floors | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 7: Field Measurements of Impact Sound Insulation of Floors | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Part 8: Laboratory Measurements of the Reduction of Transmitted Impact Noise by Floor Coverings on a Heavyweight Standard... | |
| Adaptation to climate change \x96 Guidelines on vulnerability, impacts and risk assessment | |
| Adaptation to climate change \x96 Principles, requirements and guidelines | |
| Adhesives - Determination of resistance to flow (sagging) | |
| Agricultural and Forestry Machinery - Electromagnetic Compatibility - Test Methods and Acceptance Criteria | |
| Air Quality Evaluation of the Suitability of a Measurement Procedure by Comparison with a Required Measurement Uncertainty | |
| Anaesthetic and respiratory equipment Compatibility with oxygen | |
| Animal Feeding Stuffs - Determination of Carbadox Content - Method Using High-Performance Liquid Chromatography | |
| Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization | |
| Animal Feeding Stuffs - Determination of Residues of Organophosphorus Pesticides - Gas Chromatographic Method | |
| Animal Feeding Stuffs - Determination of Trypsin Inhibitor Activity of Soya Products | |
| Animal Feeding Stuffs - Determination of Vitamin A Content - Method Using High-Performance Liquid Chromatography | |
| Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classifications of such solutions | |
| Blind Rivets - Mechanical Testing | |
| Blind Rivets - Terminology and Definitions | |
| Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline | |
| Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing | |
| Cleanrooms and Associated Controlled Environments - Part 1: Classification of Air Cleanliness | |
| Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1 | |
| Cleanrooms and Associated Controlled Environments - Part 4: Design, Construction and Start-Up | |
| Cleanrooms and associated controlled environments - Part 6: Vocabulary | |
| Cleanrooms and associated controlled environments - Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) | |
| Cleanrooms and associated controlled environments \x97 Part 5: Operations | |
| Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods | |
| Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data | |
| Cleanrooms and associated controlled environments Part 10: Classification of surface cleanliness by chemical concentration | |
| Cleanrooms and associated controlled environments Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications | |
| Cleanrooms and associated controlled environments Part 14: Assessment of suitability for use of equipment by airborne particle concentration | |
| Cleanrooms and associated controlled environments Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration | |
| Cleanrooms and associated controlled environments Part 16: Energy efficiency in cleanrooms and separative devices | |
| Cleanrooms and associated controlled environments Part 17: Particle deposition rate applications | |
| Cleanrooms and associated controlled environments Part 18: Assessment of suitability of consumables | |
| Cleanrooms and associated controlled environments Part 3: Test methods | |
| Cleanrooms and associated controlled environments Part 8: Classification of airborne molecular contamination | |
| Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration | |
| Clinical investigation of medical devices for human subjects - Good clinical practice | |
| Clinical Investigation of Medical Devices for Human Subjects - Part 2: Clinical Investigation Plans | |
| Clinical investigation of medical devices for human subjects \x97 Good clinical practice | |
| Clinical investigation of medical devices for human subjects Part 1: General requirements | |
| Conveyor belts Specification for rubber or plastics covered conveyor belts of textile construction for general use | |
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 | |
| Dental Implants - Prefabricated Parts Connecting Suprastructures to Dental Implants - Contents of Technical File | |
| Dentistry - Handpieces and motors | |
| Dentistry Duplicating material | |
| Dentistry Fatigue test for endosseous dental implants | |
| Dentistry Polymer-based die materials | |
| Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide | |
| Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by measuring the oxygen demand in a closed respirometer | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method | |
| Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide Part 2: Gravimetric measurement of carbon dioxide evolved in... | |
| Electronic fee collection - Application interface definition for dedicated short-range communication | |
| Electronic fee collection - Test procedures for user and fixed equipment Part 1: Description of test procedures | |
| Electronic fee collection - Test procedures for user and fixed equipment Part 2: Conformance test for the on-board unit application interface | |
| Environmental management - Environmental communication - Guidelines and examples | |
| Environmental management - Vocabulary | |
| Environmental management \x97 Life cycle assessment \x97 Critical review processes and reviewer competencies | |
| Environmental management \x97 Material flow cost accounting \x97 General framework | |
| Environmental management \x97 Material flow cost accounting \x97 Guidance for practical implementation in a supply chain | |
| Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature | |
| Ergonomics of the thermal evironment Evaluation of the thermal environment in vehicles Part 3: Evaluation of thermal comfort using human subjects | |
| Extruded Sheets of Impact-Modified Polystyrene (PS-I) - Requirements and Test Methods | |
| Extruded Sheets of Polyethylene (PE-HD) - Requirements and Test Methods | |
| Extruded Sheets of Polypropylene (PP) - Requirements and Test Methods | |
| Fasteners \x97 Hexalobular socket countersunk flat head screws | |
| Fasteners \x97 Hexalobular socket countersunk head screws, high head | |
| Fibre-Reinforced Plastic Composites - Determination of Flexural Properties | |
| Fibre-Reinforced Plastic Composites - Determination of the In-Plane Shear Stress/Shear Strain Response, Including the In-Plane Shear Modulus and Strength by the Plus or Minus 45 Degree Tension Test Method | |
| Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method | |
| Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at high temperature \x97 Determination of compression properties | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at high temperature \x97 Determination of tensile properties | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Methods of test for ceramic coatings \x97 Determination of fracture strain | |
| Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies | |
| Flow-metering devices for connection to terminal units of medical gas pipeline systems | |
| Gas analysis - Conversion of gas mixture composition data | |
| Gas cylinders - Cylinder valves - Manufacturing tests and examinations | |
| Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing | |
| Gas cylinders \x97 Gas properties and associated classification (FTSC) codes | |
| Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - General Requirements | |
| Gas Welding Equipment - Rubber and Plastic Hoses Assembled for Compressed or Liquefied Gases up to a Maximum Design Pressure of 450 Bar | |
| General Requirements for Non-Active Surgical Implants | |
| Geometrical product specifications (GPS) - Dimensional tolerancing Part 1: Linear sizes | |
| Geometrical product specifications (GPS) - Dimensional tolerancing Part 2: Dimensions other than linear sizes | |
| Geometrical product specifications (GPS) - Extraction | |
| Geometrical Product Specifications (GPS) - General concepts and requirements for GPS measuring equipment | |
| Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions | |
| Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature | |
| Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and... | |
| Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements | |
| Geometrical product specifications (GPS) \x97 Dimensional tolerancing Part 3: Angular sizes | |
| Geometrical product specifications (GPS) \x97 Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments | |
| Geometrical product specifications (GPS) \x97 Matrix model | |
| Geotechnical Investigation and Testing - Identification and Classification of Soil - Part 1: Identification and Description | |
| Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification | |
| Geotechnical investigation and testing \x96 Identification, description and classification of rock | |
| Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description | |
| Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification | |
| Glass in Building - Determination of Energy Balance Value - Calculation Method | |
| Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification | |
| Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements | |
| Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions | |
| Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations | |
| Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets | |
| Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding - Part 1: Determination of Emission Rate and Sampling for... | |
| Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding - Part 2: Determination of Emission Rates of Gases, Except... | |
| Health and safety in welding and allied processes - Laboratory method for sampling fume and gases Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed... | |
| Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of... | |
| Health and safety in welding and allied processes \x97 Equipment for capture and separation of welding fume Part 4: General requirements | |
| Health and safety in welding and allied processes Laboratory method for sampling fume and gases - Part 4: Fume data sheets | |
| Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements | |
| Health and safety in welding and allied processes Requirements testing and marking of equipment for air filtration Part 1: Testing of the separation efficiency for welding fume | |
| Hexagon-Head Tapping Screws | |
| Hexalobular Socket Cheese Head Screws | |
| Hexalobular Socket Countersunk Head Tapping Screws | |
| Hexalobular Socket Head Cap Screws | |
| Hexalobular Socket Pan Head Screws | |
| Hexalobular Socket Pan Head Tapping Screws | |
| Hexalobular Socket Raised Countersunk (Oval) Head Tapping Screws | |
| Hexalobular Socket Raised Countersunk Head Screws | |
| Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles - Specifications and Test Methods | |
| Immersion Suits - Part 1: Constant Wear Suits, Requirements Including Safety | |
| Immersion Suits - Part 2: Abandonment Suits, Requirements Including Safety | |
| Immersion Suits - Part 3: Test Methods | |
| Implants for surgery - Active implantable medical devices Part 2: Cardiac pacemakers | |
| Implants for surgery - Active implantable medical devices Part 4: Implantable infusion pump systems | |
| Implants for surgery - Active implantable medical devices Part 5: Circulatory support devices | |
| Implants for surgery - Active implantable medical devices Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) | |
| Implants for surgery - Active implantable medical devices Part 7: Particular requirements for cochlear and auditory brainstem implant systems | |
| Implants for surgery \x97 Active implantable medical devices Part 3: Implantable neurostimulators | |
| Integrated optics - Interfaces - Parameters relevant to coupling properties | |
| Intelligent transport systems - Graphic data dictionary Part 1: Specification | |
| Intelligent transport systems - Graphic data dictionary | |
| Intelligent transport systems Geographic Data Files (GDF) Overall data specification | |
| Leather - Chemical tests - Quantitative analysis of tanning agents by filter method | |
| Leather - Physical and mechanical tests - Determination of bending force | |
| Leather - Physical and mechanical tests - Determination of water vapour permeability | |
| Leather Guide to the selection of leather for apparel (excluding furs) | |
| Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology | |
| Manipulating industrial robots Object handling with grasp-type grippers Vocabulary and presentation of characteristics | |
| Mechanism for financing local adaptation to climate change - Performance-based climate resilience grants - Requirements and guidelines | |
| Medical Devices - Application of Risk Management to Medical Devices | |
| Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium | |
| Metallic and oxide coatings - Measurement of coating thickness - Microscopical method | |
| Metallic Coatings - Determination of Porosity on Gold Coatings on Metallic Substrates - Nitric Acid Vapour Test | |
| Metallic Coatings - Hot Dip Galvanized Coatings on Ferrous Materials - Gravimetric Determination of the Mass per Unit Area | |
| Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method | |
| Metallic materials - Charpy pendulum impact test Part 1: Test method | |
| Metallic materials - Charpy pendulum impact test Part 2: Verification of testing machines | |
| Metallic materials - Charpy pendulum impact test Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines | |
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings | |
| Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method | |
| Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines | |
| Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks | |
| Microlens array Part 1: Vocabulary | |
| Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) | |
| Milk and Milk Powder - Determination of Aflatoxin M1 Content - Clean-Up by Immunoaffinity Chromatography and Determination by High-Performance Liquid Chromatography | |
| Milk and Milk Products - Determination of Nitrate and Nitrite Contents - Part 1: Method Using Cadmium Reduction and Spectrometry | |
| Milk and Milk Products - Determination of Nitrate and Nitrite Contents - Part 2: Method Using Segmented Flow Analysis (Routine Method) | |
| Milk and Milk Products - Determination of Nitrate and Nitrite Contents - Part 3: Method Using Cadmium Reduction and Flow Injection Analysis with In-Line Dialysis (Routine Method) | |
| Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle | |
| Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content | |
| Natural Gas - Guidelines to Traceability in Analysis | |
| Natural gas - Vocabulary | |
| Non-Active Surgical Implants - Implants for Osteosynthesis - Particular Requirements | |
| Non-active surgical implants - Mammary implants Particular requirements | |
| Non-destructive testing - Qualification of radiographic film digitisation systems Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control | |
| Non-destructive testing - Qualification of radiographic film digitisation systems Part 2: Minimum requirements | |
| Oilseed meals - Determination of soluble proteins in potassium hydroxide solution | |
| Ophthalmic instruments - Fundamental requirements and test methods Part 2: Light hazard protection | |
| Ophthalmic Instruments - Fundamental Requirements and Test Methods | |
| Ophthalmic instruments Fundamental requirements and test methods Part 1: General requirements applicable to all ophthalmic instruments | |
| Ophthalmic Optics - Contact Lens Care Products - Antimicrobial Preservative Efficacy Testing and Guidance on Determining Discard Date | |
| Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses | |
| Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Fundamental Requirements | |
| Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses | |
| Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations | |
| Optics and photonics \x97 Microlens arrays \x97 Part 3: Test methods for optical properties other than wavefront aberrations | |
| Optics and photonics \x97 Microlens arrays \x97 Part 4: Test methods for geometrical properties | |
| Overview of the BS EN ISO 14971 Medical Devices Risk Management Technical Solution Pack What\x92s in this pack, and how to access video content | |
| Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method | |
| Paints and varnishes - Determination of pigment content - Part 2: Ashing method | |
| Paints and varnishes - Determination of pigment content - Part 3: Filtration method | |
| Petroleum and Natural Gas Industries - Downhole Equipment - Packers and Bridge Plugs | |
| Petroleum and Natural Gas Industries - Flexible Couplings for Mechanical Power Transmission - General Purpose Applications | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials | |
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design | |
| Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Subsea Pipeline Valves | |
| Petroleum and natural gas industries \x97 Downhole equipment \x97 Completion accessories | |
| Petroleum and natural gas industries Drilling and well-servicing equipment | |
| Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture | |
| Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 4: Fabrication, installation and operation | |
| Petroleum and Related Products - Determination of Spray Ignition Characteristics of Fire-Resistant Fluids - Part 1: Spray Flame Persistence - Hollow-Cone Nozzle Method | |
| Petroleum and Related Products - Determination of Wick Flame Persistence of Fire-Resistant Fluids | |
| Petroleum products \x97 Determination of sulfur content \x97 Wavelength-dispersiv e X-ray fluorescence spectrometry | |
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment | |
| Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Extruded sheets of impact-modified acrylonitrile-styren e copolymers (ABS, AEPDS and ASA) - Requirements and test methods | |
| Plastics - Melamine-Formaldehyd e Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications | |
| Plastics - Melamine-Formaldehyd e Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Melamine-Formaldehyd e Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds | |
| Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 1: Designation System and Basis for Specifications | |
| Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 3: Requirements for Selected Moulding Compounds | |
| Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 1: Designation System and Basis for Specifications | |
| Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 3: Requirements for Selected Moulding Compounds | |
| Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties | |
| Plastics - Polyurethane Raw Materials - Determination of Isocyanate Content | |
| Plastics - Unsaturated-Polyeste r Powder Moulding Compounds (Up-PMCs) - Part 1: Designation System and Basis for Specifications | |
| Plastics - Unsaturated-Polyeste r Powder Moulding Compounds (Up-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Unsaturated-Polyeste r Powder Moulding Compounds (Up-PMCs) - Part 3: Requirements for Selected Moulding Compounds | |
| Plastics - Urea-Formaldehyde and Urea/Melamine-Formal dehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 1: Designation System and Basis for Specifications | |
| Plastics - Urea-Formaldehyde and Urea/Melamine-Formal dehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties | |
| Plastics - Urea-Formaldehyde and Urea/Melamine-Formal dehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds | |
| Plastics \x96 Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system \x96 Method by measurement of biogas production | |
| Plastics Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures Determination of the shrinkage stress and contraction stress | |
| Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General | |
| Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 3: Fittings | |
| Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 4: Valves | |
| Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 5: Fitness for purpose of the system | |
| Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure \x97 Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Pipes | |
| Plastics Poly(vinyl alcohol) (PVAL) materials Part 1: Designation system and basis for specifications | |
| Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties | |
| Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part1: Designation system and basis for specifications | |
| Protection Against Corrosion of Iron and Steel in Structures - Zinc and Aluminium Coatings - Guidelines | |
| Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing | |
| Protective clothing - Protection against heat and flame - Method of test for limited flame spread | |
| Protective clothing for abrasive blasting operations using granular abrasives | |
| Protective Clothing for Automobile Racing Drivers - Protection Against Heat and Flame - Performance Requirements and Test Methods | |
| Pulps - Determination of Acetone-Soluble Matter | |
| Pump system energy assessment | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 10: Requirements and categorization for semi-finished products | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 1: Terminology | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 2: Test methods | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 3: Labelling | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 4: Requirements and categorization for micro gas generators | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 5: Requirements and categorization for airbag gas generators | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 6: Requirements and categorization for airbag modules | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 7: Requirements and categorization for seatbelt pretensioners | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 8: Requirements and categorization for igniters | |
| Pyrotechnic articles - Pyrotechnic articles for vehicles Part 9: Requirements and categorization for actuators | |
| Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements | |
| Quality requirements for welding Resistance welding of metallic materials Part 1: Comprehensive quality requirements | |
| Radiological protection - Criteria and performance limits for the periodic evaluation of dosimetry services | |
| Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test | |
| Reciprocal internal combustion engines Recoil starting equipment General safety requirements | |
| Refrigerating systems and heat pumps - Qualification of tightness of components and joints | |
| Resistance spot welding and projection welds Destructive testing of welds Specimen dimensions and procedure for impact shear test and cross-tension testing | |
| Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints | |
| Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels | |
| Resistance welding \x97 Procedures for determining the weldability lobe for resistance spot, projection and seam welding | |
| Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology | |
| Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications | |
| Road transport and traffic telematics \x96 Automatic vehicle and equipment identification \x96 Numbering and data structure | |
| Road transport and traffic telematics \x97 Automatic vehicle and equipment identification \x97 Numbering and data structure | |
| Road transport and traffic telematics Electronic fee collection Application interface definition for dedicated short-range communication | |
| Road vehicles - Compressed natural gas (CNG) refuelling connector | |
| Road Vehicles - Measurement of Driver Visual Behaviour with Respect to Transport Information and Control Systems - Part 1: Definitions and Parameters | |
| Road vehicles Ergonomic aspects of transport information and control systems Dialogue management principles and compliance procedures | |
| Road vehicles Ergonomic aspects of transport information and control systems Specifications and compliance procedures for in-vehicle auditory presentation | |
| Road vehicles Ergonomic aspects of transport information and control systems Specifications and compliance procedures for in-vehicle visual presentation | |
| Rotary Positive Displacement Pumps - Technical Requirements | |
| Rubber- or Plastics-Coated Fabrics - Determination of Tensile Strength and Elongation at Break | |
| Safety of machinery - Anthropometric requirements for the design of workstations at machinery | |
| Safety of Machinery - Permanent Means of Access to Machinery - Part 1: Choice of a Fixed Means of Access between Two Levels | |
| Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways | |
| Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails | |
| Safety of machinery - Permanent means of access to machinery - Part 3: Stairways, stepladders and guard-rails | |
| Safety of machinery - Permanent means of access to machinery - Part 4: Fixed Ladders | |
| Safety of machinery - Prevention of unexpected start-up | |
| Safety of machinery - Risk assessment - Part 1: Principles | |
| Safety of machinery \x97 Guards \x97 General requirements for the design and construction of fixed and movable guards | |
| Safety of machinery \x97 Interlocking devices associated with guards \x97 Principles for design and selection | |
| Safety of machinery \x97 Reduction of risks to health resul ti ng from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers | |
| Safety of machinery \x97 Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures | |
| Safety of machinery Hygiene requirements for the design of machinery | |
| Ships and Marine Technology - Identification Colours for the Content of Piping Systems - Part 1: Main Colours and Media | |
| Slotted countersunk (flat) head tapping screws | |
| Slotted pan head tapping screws | |
| Slotted raised countersunk (oval) head tapping screws | |
| Small craft - Airborne sound emitted by powered recreational craft Part 3: Sound assessment using calculation and measurement procedures | |
| Small craft - Bilge-pumping systems | |
| Small craft - Builder\x92s plate | |
| Small craft - Liquid-fuelled galley stoves | |
| Small Craft - Maximum Load Capacity | |
| Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft | |
| Small craft \x97 Airborne sound emitted by powered recreational craft Part 1: Pass-by measurement procedures | |
| Small craft Airborne sound emitted by powered recreational craft Part 2: Sound assessment using reference craft | |
| Software ergonomics for multimedia user interfaces Part 1: Design priciples and framework | |
| Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control | |
| Software ergonomics for multimedia user interfaces Part 3: Media selection and combination | |
| Soil quality - Determination of exchangeable acidity in barium chloride extracts | |
| Soil quality - Determination of soil microbial biomass - Part 2: Fumigation-extractio n method | |
| Soil quality - Determination of soil microbial biomass Part 1: Substrate-induced respiration method | |
| Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption | |
| Soil quality - Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions | |
| Soil quality \x97 Biological methods \x97 Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes | |
| Solid biofuels - Sample preparation | |
| Space systems - Safety requirements - Part 1: System safety | |
| Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds | |
| Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot, Seam and Embossed Projection Welds | |
| Specimen Dimensions and Procedure for Shear Testing Resistance Spot, Seam and Embossed Projection Welds | |
| Spectacle Lenses Part 8: Fundamental Requirements for Uncut Finished Lenses | |
| Steel - Charpy V-Notch Pendulum Impact Test - Instrumented Test Method | |
| Steel and iron Sampling and preparation of samples for the determination of chemical composition | |
| Sterilization of Health Care Products - Biological Indicators - Guidance for the Selection, Use and Interpretation of Results | |
| Sterilization of Health Care Products - General Requirements for Characterization of a Sterilizing Agent and the Development, Validation and Routine Control of a Sterilization Process for Medical Devices | |
| Sterilization of Single-Use Medical Devices Incorporating Materials of Animal Origin - Validation and Routine Control of Sterilization by Liquid Chemical Sterilants | |
| Tapping Screw Threads | |
| Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of nonoxidic ceramic raw and basic materials Part 1: Infrared measurement methods | |
| Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of nonoxidic ceramic raw and basic materials Part 2: Inductively coupled plasma optical emission spectrometry... | |
| Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method) | |
| Textiles - Determination of Formaldehyde - Part 2: Released Formaldehyde (Vapour Absorption Method) | |
| Textiles - Determination of formaldehyde Part 3: Free and hydrolysed formaldehyde (extraction method) by liquid chromatography | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres... | |
| Textiles - Methods for determination of certain aromatic amines derived from azo colorants Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene | |
| Textiles - Oil Repellency - Hydrocarbon Resistance Test | |
| Textiles \x97 Determination of the phthalate content \x97 Tetrahydrofuran method | |
| Thermal Bridges in Building Constructions - Linear Thermal Transmittance - Simplified Methods and Default Values | |
| Thermal Spraying - Approval Testing of Thermal Sprayers | |
| Thermal spraying - Characterization and testing of thermally sprayed coatings | |
| Thermal Spraying - Procedures for the Application of Thermally Sprayed Coatings for Engineering Components | |
| Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 1: Guidance for Selection and Use | |
| Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 2: Comprehensive Quality Requirements | |
| Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 3: Standard Quality Requirements | |
| Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 4: Elementary Quality Requirements | |
| Thermal Spraying - Spraying and Fusing of Self-Fluxing Alloys | |
| Thermal Spraying - Wires, Rods and Cords for Flame and Arc Spraying - Classification - Technical Supply Conditions | |
| Thermal spraying \x97 Determination of tensile adhesive strength | |
| Thermal spraying \x97 Powders Part 1: Characterization and technical supply conditions | |
| Thermal spraying \x97 Quality requirements for manufacturers of thermal sprayed coatings | |
| Thermal spraying \x97 Terminology, classification | |
| Thermal spraying Post-treatment and finishing of thermally sprayed coatings | |
| Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information | |
| Tracked Changes (Redline) - Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination | |
| Tracked Changes (Redline) - Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) | |
| Tracked Changes (Redline) - Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration | |
| Tracked Changes (Redline) - Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration | |
| Tracked Changes (Redline) - Cleanrooms and associated controlled environments Part 4: Design, construction and start-up | |
| Tracked Changes (Redline) - Cleanrooms and associated controlled environments Part 5: Operations | |
| Tracked Changes (Redline) - Clinical investigation of medical devices for human subjects \x97 Good clinical practice | |
| Tracked Changes (Redline) - Dentistry - Duplicating material | |
| Tracked Changes (Redline) - Dentistry - Implants - Dynamic loading test for endosseous dental implants | |
| Tracked Changes (Redline) - Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium \x96 Method by analysis of evolved carbon dioxide | |
| Tracked Changes (Redline) - Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium \x96 Method by measuring the oxygen demand in a closed respirometer | |
| Tracked Changes (Redline) - Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide Part 2: Gravimetric measurement of... | |
| Tracked Changes (Redline) - Electronic fee collection - Application interface definition for dedicated short-range communication | |
| Tracked Changes (Redline) - Environmental management - Life cycle assessment - Critical review processes and reviewer competencies | |
| Tracked Changes (Redline) - Extruded sheets of impact-modified polystyrene (PS-I) \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Extruded sheets of polyethylene (PE-HD) - Requirements and test methods | |
| Tracked Changes (Redline) - Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability | |
| Tracked Changes (Redline) - Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction | |
| Tracked Changes (Redline) - Fine ceramics (advanced ceramics, advanced technical ceramics) \x97 Mechanical properties of ceramic composites at high temperature \x97 Determination of compressive properties | |
| Tracked Changes (Redline) - Flow control devices for connection to a medical gas supply system | |
| Tracked Changes (Redline) - Gas analysis - Conversion of gas mixture composition data | |
| Tracked Changes (Redline) - Gas cylinders - Cylinder valves - Manufacturing tests and examinations | |
| Tracked Changes (Redline) - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing | |
| Tracked Changes (Redline) - Gas cylinders \x96 Gas properties and associated classification (FTSC) codes | |
| Tracked Changes (Redline) - Gas welding equipment \x96 Acetylene manifold systems for welding, cutting and allied processes \x96 General requirements | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Dimensional tolerancing Part 2: Dimensions other than linear or angular sizes | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for verifying conformity or nonconformity with specifications | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) \x97 Dimensional tolerancing Part 1: Linear sizes | |
| Tracked Changes (Redline) - Geometrical product specifications (GPS) \x97 General concepts Part 3: Toleranced features | |
| Tracked Changes (Redline) - Geotechnical investigation and testing \x96 Identification, description and classification of rock | |
| Tracked Changes (Redline) - Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification | |
| Tracked Changes (Redline) - Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations | |
| Tracked Changes (Redline) - Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Tracked Changes (Redline) - Greenhouse gases Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements | |
| Tracked Changes (Redline) - Greenhouse gases Part 3: Specification with guidance for the verification and validation of greenhouse gas statements | |
| Tracked Changes (Redline) - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods | |
| Tracked Changes (Redline) - Integrated optics - Interfaces - Parameters relevant to coupling properties | |
| Tracked Changes (Redline) - Intelligent transport systems - Graphic data dictionary - Part 1: Specification | |
| Tracked Changes (Redline) - Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel... | |
| Tracked Changes (Redline) - Leather \x96 Chemical tests \x96 Quantitative analysis of tanning agents by filter method | |
| Tracked Changes (Redline) - Leather \x97 Physical and mechanical tests \x97 Determination of bending force | |
| Tracked Changes (Redline) - Leather \x97 Physical and mechanical tests \x97 Determination of water vapour permeability | |
| Tracked Changes (Redline) - Medical devices - Application of risk management to medical devices | |
| Tracked Changes (Redline) - Metallic materials - Charpy pendulum impact test Part 1: Test method | |
| Tracked Changes (Redline) - Metallic materials - Charpy pendulum impact test Part 2: Verification of testing machines | |
| Tracked Changes (Redline) - Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method | |
| Tracked Changes (Redline) - Metallic materials - Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and nonmetallic coatings | |
| Tracked Changes (Redline) - Metallic materials \x97 Charpy pendulum impact test Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines | |
| Tracked Changes (Redline) - Natural gas \x97 Vocabulary | |
| Tracked Changes (Redline) - Non-active surgical implants - General requirements | |
| Tracked Changes (Redline) - Non-active surgical implants \x97 Mammary implants \x97 Specific requirements | |
| Tracked Changes (Redline) - Oil and gas industries including lower carbon energy \x97 Pipeline transportation systems \x97 Subsea pipeline valves | |
| Tracked Changes (Redline) - Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection | |
| Tracked Changes (Redline) - Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses | |
| Tracked Changes (Redline) - Ophthalmic optics \x97 Contact lenses and contact lens care products \x97 Fundamental requirements | |
| Tracked Changes (Redline) - Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations | |
| Tracked Changes (Redline) - Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations | |
| Tracked Changes (Redline) - Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties | |
| Tracked Changes (Redline) - Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials | |
| Tracked Changes (Redline) - Petroleum, petrochemical and natural gas industries \x97 Collection and exchange of reliability and maintenance data for equipment | |
| Tracked Changes (Redline) - Plastics - Poly(vinyl alcohol) (PVAL) materials Part 2: Determination of properties | |
| Tracked Changes (Redline) - Plastics \x97 Extruded sheets of polypropylene (PP) \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing | |
| Tracked Changes (Redline) - Protective clothing \x97 Protection against flame \x97 Method of test for limited flame spread | |
| Tracked Changes (Redline) - Radiological protection \x97 Criteria and performance limits for the periodic evaluation of dosimetry services for external radiation | |
| Tracked Changes (Redline) - Refrigerating systems and heat pumps \x97 Qualification of tightness of components and joints | |
| Tracked Changes (Redline) - Resistance welding \x97 Destructive testing of welds \x97 Specimen dimensions and procedure for impact tensile shear test and crosstension testing of resistance spot and embossed projection... | |
| Tracked Changes (Redline) - Resistance welding \x97 Destructive testing of welds \x97 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds | |
| Tracked Changes (Redline) - Resistance welding \x97 Destructive testing of welds \x97 Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds | |
| Tracked Changes (Redline) - Resistance welding \x97 Procedure for spot welding of uncoated and coated low carbon steels | |
| Tracked Changes (Redline) - Road transport and traffic telematics \x96 Automatic vehicle and equipment identification \x96 Numbering and data structure | |
| Tracked Changes (Redline) - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for invehicle visual presentation | |
| Tracked Changes (Redline) - Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures | |
| Tracked Changes (Redline) - Rubber- or plastics-coated fabrics \x97 Determination of tensile strength and elongation at break | |
| Tracked Changes (Redline) - Safety of machinery - Interlocking devices associated with guards - Principles for design and selection | |
| Tracked Changes (Redline) - Safety of machinery - Permanent means of access to machinery Part 4: Fixed ladders | |
| Tracked Changes (Redline) - Safety of machinery \x97 Guards \x97 General requirements for the design and construction of fixed and movable guards | |
| Tracked Changes (Redline) - Small craft - Airborne sound emitted by powered recreational craft Part 3: Sound assessment using calculation and measurement procedures | |
| Tracked Changes (Redline) - Small craft - Liquid-fuelled galley stoves and heating appliances | |
| Tracked Changes (Redline) - Small craft \x96 Airborne sound emitted by powered recreational craft Part 1: Pass-by measurement procedures | |
| Tracked Changes (Redline) - Small craft \x97 Maximum load capacity | |
| Tracked Changes (Redline) - Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant | |
| Tracked Changes (Redline) - Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption | |
| Tracked Changes (Redline) - Steel and iron - Sampling and preparation of samples for the determination of chemical composition | |
| Tracked Changes (Redline) - Sterilization of health care products \x97 Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives \x97 Requirements for characterization, development, validation... | |
| Tracked Changes (Redline) - Textiles - Determination of the phthalate content - Tetrahydrofuran method | |
| Tracked Changes (Redline) - Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values | |
| Tracked Changes (Redline) - Thermal spraying - Qualification testing of thermal sprayers | |
| Tracked Changes (Redline) - Thermal spraying - Spraying and fusing of self-fluxing alloys | |
| Tracked Changes (Redline) - Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions | |
| Tracked Changes (Redline) - Welding - Arc stud welding of metallic materials | |
| Tracked Changes (Redline) - Welding consumables - Procurement of filler materials and fluxes | |
| Tracked Changes (Redline) - Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification | |
| Tracked Changes (Redline) - Welding consumables \x96 Fluxes for submerged arc welding and electroslag welding \x96 Classification | |
| Tracked Changes (Redline) - Welding consumables \x97 Covered electrodes for manual metal arc welding of nickel and nickel alloys \x97 Classification | |
| Tracked Changes (Redline) - Welding consumables \x97 Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels \x97 Classification | |
| Tracked Changes (Redline) - Welding coordination - Tasks and responsibilities | |
| Tracked Changes (Redline) - Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials | |
| Tracked Changes (Redline) - Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 1: General principles of design and corrosion resistance... | |
| Tracked Changes (Redline) \x96 Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air Tracked cleanliness by particle concentration | |
| Tracked Changes (Redline) \x96 Optics and photonics \x96 Microlens arrays Part 1: Vocabulary | |
| Tracked Changes (Redline) \x96 Safety of machinery \x97 Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access | |
| Tracked Changes (Redline) \x96 Safety of machinery \x97 Permanent means of access to machinery Part 2: Working platforms and walkways | |
| Tracked Changes (Redline) \x96 Safety of machinery \x97 Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails | |
| Tracked Changes (Redline) \x96 Welding consumables \x97 Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels \x97 Classification | |
| Traffic and Travel Information (TTI) - TTI Messages via traffic message coding - Part 1: Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C | |
| Traffic and Travel Information (TTI) TTI Messages via traffic message coding Part 3: Location referencing for ALERT-C | |
| Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 6: Encryption and conditional access for the Radio Data System - Traffic Message Channel ALERT C... | |
| Traffic and Traveller Information (TTI) TTI Messages via traffic message coding Part 2: Event and information codes for Radio Data System Traffic Message Channel (RDS-TMC) | |
| Transportable Gas Cylinders - Gas Cylinder Valves - Manufacturing Tests and Inspections | |
| Vickers Hardness Testing of Resistance Spot, Projection and Seam Welds (Low Load and Microhardness) | |
| Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions | |
| Water quality - Determination of dissolved Li+, Na+, NH4 +, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water | |
| Water quality - Determination of phenol index by flow analysis (FIA and CFA) | |
| Water Quality - Determination of Total Cyanide and Free Cyanide by Continuous Flow Analysis | |
| Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) | |
| Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis (CFA) | |
| Water quality - Part 5: Biological methods - Section 5.23: Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of released inorganic carbon in... | |
| Water quality \x97 Enumeration of Clostridium perfringens \x97 Method using membrane filtration | |
| Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions | |
| Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 2: Measurement of Accelerating Voltage Characteristics | |
| Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 3: Measurement of Beam Current Characteristics | |
| Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 4: Measurement of Welding Speed | |
| Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 5: Measurement of Run-Out Accuracy | |
| Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 6: Measurement of Stability of Spot Position | |
| Welding - Arc Stud Welding of Metallic Materials | |
| Welding and allied processes - Flux and gas shielded electrical welding processes - Procurement guidelines for consumables | |
| Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification | |
| Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification | |
| Welding consumables - Gases and gas mixtures for fusion welding and allied processes | |
| Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification | |
| Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification | |
| Welding consumables - Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - Classification | |
| Welding consumables Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen | |
| Welding coordination Tasks and responsibilities | |
| Welding personnel \x97 Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 1: General principles of design and corrosion resistance | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing | |
| Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 3: Sherardizing |
| << Prev | Next >> |