Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
260
270
280
290
300
304
305
306
307
308
309
310
311
312
313
314
315
316
320
330
340
350
360
370
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 300/500 V Fire Resistant Electric Cables Having Low Emission of Smoke and Corrosive Gases When Affected by Fire Part 2: Multipair Cables | |
| Abrasive Grains - Part 3: Method for Sampling and Splitting | |
| Abrasive Grains Part 1: Method for the Determination of the Bulk Density of Macrograins | |
| Abrasive Grains Part 2: Method for Determining the Capillarity | |
| Abrasive Grains Part 4: Specification for Test-Sieving Machines | |
| Agricultural Irrigation Equipment Part 1: Specification for Emitters | |
| Agricultural Irrigation Equipment Part 2: Specification for Emitting Pipe Systems | |
| Alarm Signals for Anaesthesia and Respiratory Care Part 1: Specification for Visual Alarm Signals | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 1: General Requirements and Sample Dissolution | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 2: Method for the Determination of Cobalt | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 3: Method for the Determination of Chromium | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 4: Method for the Determination of Copper | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 5: Method for the Determination of Iron | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 6: Method for the Determination of Manganese | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 7: Method for Determination of Aluminium | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 8: Method for Determination of Silicon | |
| Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 9: Method for Determination of Vanadium | |
| Anchor Winches for Mobile Offshore Units | |
| Animal Glue for Wood (Joiner's Glue) (Dry Glue; Jelly or Liquid Glue) | |
| Application Guide for Calculation of Short-Circuit Currents in Low-Voltage Radial Systems | |
| Assessing Solar Water Heaters - Elastomeric Materials for Absorbers, Connecting Pipes and Fittings | |
| Beaded Desiccant Silica Gel | |
| Building Construction - Expression of Users' Requirements Part 1: Thermal Requirements | |
| Building Construction - Expression of Users' Requirements Part 2: Air Purity Requirements | |
| Building Construction - Expression of Users' Requirements Part 3: Acoustical Requirements | |
| Bushings for Liquid Filled Transformers Above 1 kV and up to 36 kV | |
| Calculation of Thermally Permissible Short-Circuit Currents, Taking into Account Non-Adiabatic Heating Effects | |
| Calculation Procedures for Static Measurement of Refrigerated Light Hydrocarbon Fluids | |
| Calibrating Field Pyrheliometers by Comparison to a Reference Pyrheliometer | |
| Calibration of Spherical Tanks for Refrigerated Light-Hydrocarbon Fluids in Ships Part 1: Method of Stereo-Photogrammetr y | |
| Calibration of Spherical Tanks for Refrigerated Light-Hydrocarbon Fluids in Ships Part 2: Triangulation Method | |
| Classification for Dredgers | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 2.2 Precipitation and wind | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 2.3: Air pressure | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 2.4 Solar radiation and temperature | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 2.5 Dust, sand, slt mist | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature Section 2.6 Earthquake vibration and shock | |
| Classification of environmental conditions - Part 2: Environmental conditions appearing in nature Section 2.7 Fauna and flora | |
| Classification of Environmental Conditions Part 1: Environmental Parameters and Their Severities | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 2.1: Temperature and Humidity | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.0: Introduction | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.1: Storage | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.2: Transportation | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.3: Stationary Use at Weatherprotected Locations | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.4: Stationary Use at Non- Weatherprotected Locations | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.5: Ground Vehicle Installations | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.6: Ship Environment | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.7: Portable and Non-Stationary Use | |
| Clear-View Screens for Use in Ships | |
| Code for Designation of Colours | |
| Code of practice for Audio-frequency induction-loop systems (AFILS) | |
| Code of Practice for Documentation for Social Alarm Systems | |
| Code of practice for Earthing | |
| Code of practice for Installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors | |
| Code of practice for protective earthing of electrical installations | |
| Code of Practice for Stabilization and Thermal Insulation of Cavity Walls (with Masonry or Concrete Inner and Outer Leaves) by Filling with Polyurethane (PUR) Foam Systems | |
| Code of Practice for Static Guarding, Mobile Patrol and Keyholding Services | |
| Code of practice for the preparation, commissioning and maintenance of domestic central heating and cooling water systems | |
| Code of practice for Thermally Insulated Underground Piping Systems | |
| Code of practice for Use of spray extraction machines on carpets and soft floor coverings in hospitals | |
| Coding System for Hull Identification of Small Craft | |
| Combination Wrenches | |
| Coupling Capacitors and Capacitor Dividers | |
| Cross Recessed Machine Screws Part 1: Specification for Pan Head Screws of Product Grade A | |
| Cross Recessed Machine Screws Part 2: Specification for Countersunk Flat Head Screws of Product Grade A and Property Class 4.8 Only | |
| Cross Recessed Machine Screws Part 3: Specification for Raised Countersunk Head Screws Product Grade A | |
| Cross-Recessed Tapping Screws Part 1: Specification for Pan Head Screws | |
| Cross-Recessed Tapping Screws Part 2: Specification for Countersunk Flat Head Screws | |
| Cross-Recessed Tapping Screws Part 3: Specification for Raised Countersunk Head Screws | |
| Current Transformers | |
| Data Transfer Between Agricultural Tractors and Attached Machinery Part 1: Specification for Data Bus Protocol | |
| Dean and Stark Apparatus | |
| Density-composition tables for aqueous solutions of sulphuric acid | |
| Dental Cartridge Syringes | |
| Dental Extraction Forceps Part 1: Specification for Screw and Pin Joint Types | |
| Dental Polymer-Based Crown and Bridge Materials | |
| Description and Measurement of Environmental Noise Part 1: Guide to Quantities and Procedures | |
| Description and Measurement of Environmental Noise Part 2: Guide to the Acquisition of Data Pertinent to Land Use | |
| Description and Measurement of Environmental Noise Part 3: Guide to Application to Noise Limits | |
| Determination of Economic Optimization of Power Cable Size | |
| Determination of the Bending Stiffness of Paper and Board by Static Methods | |
| Digital Recorders for Measurements in High-Voltage Impulse Tests Part 1: Requirements for Digital Recorders | |
| Direct Tension Indicators - Part 2: Specification for Nut Face and Bolt Face Washers | |
| Direct Tension Indicators Part 1: Specification for Compressible Washers | |
| Domestic Digital Bus (D2B) for Audio, Video and Audiovisual Systems | |
| Durability of Buildings and Building Elements, Products and Components | |
| Effect of Dry Heat on Fabrics Under Low Pressure Part 1: Method for Dry Heat Treatment of Fabrics | |
| Effect of Dry Heat on Fabrics Under Low Pressure Part 2: Method for Determination of Dimensional Change in Fabrics Exposed to Dry Heat | |
| Elastic Properties of Flat, Non-Adhesive, Extensible Fabric Bandages | |
| Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V - Part 2: Harmonized cable types from HD 21 and HD 22 (Implementation of... | |
| Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V - Part 3: National standard cables not included in HD 21 and HD 22... | |
| Electric cables \x96 Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire Part 1: Multicore cables | |
| Electric cables Guide to use for cables with a rated voltage not exceeding 450/750 V Part 1: General guidance | |
| Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial-Process Control Systems, Guidance for Inspection and Routine Testing | |
| Electrical Apparatus Complying with BS 5501 or BS 6941 in the Presence of Combustible Dusts | |
| Electrical Measuring Instruments - X-t Recorders Part 1: Definitions and Requirements | |
| Electrical Measuring Instruments - X-t Recorders Part 2. Recommended Additional Test Methods | |
| Electrical Measuring Instruments - X-Y Recorders | |
| Electromagnetic Environment for Low-Frequency Conducted Disturbances and Signalling in Public Power Supply Systems | |
| Electronic Transfer of Geographic Information (NTF) Part 1: Specification for NTF Structures | |
| Electronic Transfer of Geographic Information (NTF) Part 2: Specification for Implementing Plain NTF | |
| Electronic Transfer of Geographic Information (NTF) Part 3: Specification for Implementing NTF Using BS 6690 | |
| Estimating the Average Grain Size of Copper and Copper Alloys | |
| Exchange of Information for the Analytical Assessment of Shock Resistance of Mechanical Systems | |
| Extruded Cellular Unplasticized PVC (PVC-UE) Profiles | |
| Fatigue Design and Assessment of Steel Structures | |
| Fibre Cement Flue Pipes, Fittings and Terminals Part 1: Specification for Light Quality Fibre Cement Flue Pipes, Fittings and Terminals | |
| Fibre Cement Flue Pipes, Fittings and Terminals Part 2: Specification for Heavy Quality Fibre Cement Flue Pipes, Fittings and Terminals | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 1: General Method | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 2: Guide to Staining | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 3: Method of Test by Herzberg Stain | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 4: Method of Test by Graff 'C' Stain | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 5: Method of Test by Lofton-Merritt Stain (Wisbar Modification) | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 6: Determination of Fibre Coarseness | |
| Fibre Furnish Analysis of Paper, Board and Pulps Part 7: Determination of Weight Factors | |
| Filters for the Measurement of Audible Sound in the Presence of Ultrasound | |
| Flammability of Air Cleaner Elements for Internal Combustion Engines | |
| Fracture Mechanics Toughness Tests Part 1: Method for Determination of KIc, Critical CTOD and Critical J Values of Metallic Materials | |
| Fracture Mechanics Toughness Tests Part 2: Method for Determination of KIc, Critical CTOD and Critical J Values of Welds in Metallic Materials | |
| Fracture mechanics toughness tests Part 3: Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa\xb7m0.5s-1 | |
| Fracture Mechanics Toughness Tests Part 4: Method for Determination of Fracture Resistance Curves and Initiation Values for Stable Crack Extension in Metallic Materials | |
| Full-flow lubricating oil filters for internal combustion engines - Part 4: Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 13: Specification for Dimensions of Spin-on Filters | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 2: Method of Test for Element By-Pass Valve Characteristics | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 3: Methods of Test for Resistance to High Differential Pressure and to Elevated Temperature | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 5: Method of Test for Cold Start Simulation and Hydraulic Pulse Durability | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 6: Method of Test for Static Burst Pressure | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 7: Method of Test for Vibration Fatigue | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 8: Method of Test for Inlet Anti-Drain Valves | |
| Full-Flow Lubricating Oil Filters for Internal Combustion Engines Part 9: Method of Test for Inlet and Outlet Anti-Drain Valves | |
| Fusion Welding of Austenitic Stainless Steels | |
| General Criteria for Certification Bodies Operating Certification of Personnel | |
| General Criteria for Certification Bodies Operating Product Certification | |
| General Criteria for Certification Bodies Operating Quality System Certification | |
| General Criteria for Laboratory Accreditation Bodies | |
| General Criteria for Suppliers Declaration of Conformity | |
| General Criteria for the Assessment of Testing Laboratories | |
| General Criteria for the Operation of Testing Laboratories | |
| General Principles for the Creation of Graphical Symbols for Use on Equipment | |
| General Purpose Self-Service Trolleys | |
| Glass Fibre Reinforced Plastics Cisterns for Cold Water Storage Part 1: Specification for One-Piece Cisterns of Capacity up to 500 L | |
| Glass Fibre Reinforced Plastics Cisterns for Cold Water Storage Part 2: Specification for One-Piece Cisterns of Nominal Capacity from 500 1 to 25 000 1 | |
| Glass Fibre Reinforced Plastics Cisterns for Cold Water Storage Part 3: Specification for Sectional Tanks | |
| Glossary of Terms for Surface Active Agents | |
| Glossary of Terms Used in Industrial Screening | |
| Graphic Technology - Prepress Digital Data Exchange - Colour Picture Data on Magnetic Tape | |
| Guide for Determination of Calorific Values of Solid, Liquid and Gaseous Fuels (Including Definitions) | |
| Guide for Structural Design of Pavements Constructed with Clay or Concrete Block Pavers | |
| Guide to fatigue design and assessment of steel products | |
| Guide to General Considerations for Telecommunication Services for Electrical Power Systems | |
| Guide to Hierarchical Interconnection Technology | |
| Guide to High-Voltage Test Techniques for Low-Voltage Equipment Part 1: Definitions, Test and Procedure Requirements | |
| Guide to Presentation of tables and graphs | |
| Guide to Quality Assurance Plans for Tools for Live Working | |
| Guide to Selection and Use of Thermostatic Radiator Valves | |
| Guide to Specifying Green Coffee | |
| Guide to The design and preparation of documentation for users of application software | |
| Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type Beta Format - FM Audio Recording Part 1: 625 Line - 50 Field Systems | |
| Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - FM Audio Recording | |
| Hexagon Flange Head Tapping Screws | |
| Hexagon Washer Head Tapping Screws | |
| High-Frequency Dielectric Heating Installations - Test Methods for the Determination of Power Output | |
| High-Voltage Alternating Current Switch-Fuse Combinations | |
| Hot Rolled Quenched and Tempered Weldable Structural Steel Plates | |
| Human resource \x96 Valuing people \x96 Management system \x96 Requirements and guidance | |
| Hydraulic Fluid Power - Four-Screw, One-Piece Square-Flange Connections for Use at Pressures of 25 MPa and 40 MPa (250 Bar and 400 Bar) | |
| Hydrogen Peroxide for Industrial Use - Part 1: Method for Determination of Hydrogen Peroxide Content | |
| Hydrogen Peroxide for Industrial Use - Part 2: Method for Determination of Stability at 100 Degrees C | |
| Hydrogen Peroxide for Industrial Use - Part 3: Method for Determination of Apparent Acidity | |
| Inclusion of Glass in the Construction of Furniture, Other Than Tables or Trolleys, Including Cabinets, Shelving Systems and Wall Hung or Free Standing Mirrors | |
| Industrial Belt Drives - Dimensions of Pulleys and V-Ribbed Belts of PH, PJ, PK, PL, and PM Profiles | |
| Industrial Microwave Heating Installations - Test Methods for Determination of Power Output | |
| Installation and Inspection of Uninsulated Compression and Mechanical Connectors for Power Cables with Copper or Aluminium Conductors | |
| Installation of Domestic Direct Gas-Fired Tumble Dryers of up to 3 kW Heat Input (2nd and 3rd Family Gases) | |
| Installation of Factory - Made Chimneys to BS 4543 for Domestic Appliances - Part 4: Recommendations for Installation Design and Installation | |
| Installation of Factory- Made Chimneys to BS 4543 for Domestic Appliances Part 1: Method of Specifying Installation Design Information | |
| Installation of Factory- Made Chimneys to BS 4543 for Domestic Appliances Part 2: Specification for Installation Design | |
| Installation of Factory- Made Chimneys to BS 4543 for Domestic Appliances Part 3: Specification for Site Installation | |
| Instrumentation for the Measurement of Vibration Exposure of Human Beings Part 1: Specification for General Requirements for Instrumentation for Measuring the Vibration Applied to Human Beings | |
| Instrumentation for the Measurement of Vibration Exposure of Human Beings Part 2: Specification for Instrumentation for Measuring Vibration Transmitted to the Hand | |
| Instrumentation for the Measurement of Vibration Exposure of Human Beings Part 3: Specification for Instrumentation for Measuring Vibration Exposure to the Whole Body | |
| Insulating and Sheathing Materials for Cables Part 0: General Introduction | |
| Insulating and Sheathing Materials for Cables Part 12: Miscellaneous Sheathing Compounds Section 12.1: Harmonized Thermoplastic Polyurethane Sheathing Compound | |
| Insulating and Sheathing Materials for Cables Part 1: Elastomeric Insulating Compounds Section 1.2: General 90 Degrees Celsius Application | |
| Insulating and Sheathing Materials for Cables Part 1: Elastometric Insulating Compounds Section 1.1: Harmonized Types | |
| Insulating and Sheathing Materials for Cables Part 1: Elastometric Insulating Compounds Section 1.3: XLPE | |
| Insulating and Sheathing Materials for Cables Part 1: Elastometric Insulating Compounds Section 1.4: Oil Resisting Types | |
| Insulating and Sheathing Materials for Cables Part 1: Elastometric Insulating Compounds Section 1.5: Flame Retardant Composites | |
| Insulating and Sheathing Materials for Cables Part 1: Elastometric Insulating Compounds Section 1.6: Coil End Lead Types | |
| Insulating and Sheathing Materials for Cables Part 2: Elastomeric Sheathing Compounds Section 2.3: General Application | |
| Insulating and Sheathing Materials for Cables Part 2: Elastometric Insulating Compounds Section 2.1: Harmonized Types | |
| Insulating and Sheathing Materials for Cables Part 2: Elastometric Insulating Compounds Section 2.4: Welding Cable Covering | |
| Insulating and Sheathing Materials for Cables Part 2: Elastometric Insulating Compounds Section 2.5: Sheathing Compounds for Low Smoke and Acid Gas Specification for Emission for General Application | |
| Insulating and Sheathing Materials for Cables Part 2: Elastometric Insulating Compounds Section 2.6: Sheathing Compounds for Ships Wiring and Offshore Applications | |
| Insulating and Sheathing Materials for Cables Part 3: PVC Insulating Compounds Section 3.1: Harmonized Types | |
| Insulating and Sheathing Materials for Cables Part 3: PVC Insulating Compounds Section 3.2: Hard Grade Types | |
| Insulating and Sheathing Materials for Cables Part 4: PVC Sheathing Compounds Section 4.1: Harmonized Types | |
| Insulating and Sheathing Materials for Cables Part 4: PVC Sheathing Compounds Section 4.2: General Application | |
| Insulating and Sheathing Materials for Cables Part 5: Cross-Linked Insulating Compounds Having Low Emission of Corrosive Gases, and Suitable for Use in Cables Having Low Emission of Smoke When Affected... | |
| Insulating and Sheathing Materials for Cables Part 6: Thermoplastic Sheathing Compounds Having Low Emission of Corrosive Gases, and Suitable for Use in Cables Having Low Emission of Smoke When Affected... | |
| Insulating and Sheathing Materials for Cables Part 8: Cross-Linked Sheathing Compounds Having Low Emission of Corrosive Gases, and Suitable for Use in Cables Having Low Emission of Smoke When Affected... | |
| Insulating and Sheathing Materials for Cables; Part 10: Thermoplastic Medium Density Polyethylene (MDPE) Sheathing Compound | |
| Insulating and Sheathing Materials for Cables; Part 11: Miscellaneous Insulating Compounds Section 11.1 Harmonized Cross-Linked PVC Types | |
| Insulating and Sheathing Materials for Cables; Part 2: Elastomeric Sheathing Compounds; Section 2.2: Heat Resisting Types | |
| Insulation and Sheathing Materials for Cables Part 4: PVC Sheathing Compounds Section 4.3: Special Applications- RF Cables | |
| Interconnection of Radio and TV Receivers to Feeder System Outlets | |
| Internal Fuses and Internal Overpressure Disconnectors for Capacitors for Inductive Heat Generating Plants | |
| Internal Fuses and Internal Overpressure Disconnectors for Shunt Capacitors | |
| Internal Fuses for Series Capacitors | |
| Isolation of the Welding Circuit in Arc Welding Plant | |
| Lead-Acid Batteries for the Propulsion of Light Electric Vehicles | |
| Linear Motion, Recirculating Ball, Sleeve Type Rolling Bearings (Metric Series) | |
| Loft Ladders | |
| Loran-C Receivers for Ships | |
| Low Vision Aids Part 1: Specification for Hand and Stand Magnifiers, Including Magnifiers with an Integral Source of Illumination | |
| Low Vision Aids Part 2: Specification for Spectacle Magnifiers and Similar Devices | |
| Malleable Wires for Use as Sutures and Other Surgical Applications | |
| Manned Security Services Part 1: Code of Practice for Static Guarding and Mobile Patrol Services | |
| Marine Echo-Sounding Equipment | |
| Marine Speed and Distance Measuring Equipment (SDME) | |
| Materials for Damp-Proof Courses | |
| Measurement of Smoke Density of Electric Cables Burning under Defined Conditions Part 1: Test Apparatus | |
| Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 2: Test Procedure and Requirements | |
| Measurement Techniques and Operational Adjustments of Broadcast VTRs Part 1: Guide to Operational Adjustments on Analogue Composite Broadcast VTRs | |
| Measurement Techniques and Operational Adjustments of Broadcast VTRs Part 2: Guide to Special Mechanical Measurements and Alignments | |
| Measuring Method for Chrominance Signal-to- Random Noise Ratio for Video Tape Recorders | |
| Mechanical Properties of Heat-Treated Steel Tapping Screws | |
| Mechanical Vibration - Methods and Criteria for the Mechanical Balancing of Flexible Rotors | |
| Mechanical Vibration - Symbols for Balancing and Associated Instrumentation | |
| Metallic Multilayer Plain Bearings Part 1: Method for Non-Destructive Ultrasonic Testing of Bond | |
| Metallic Multilayer Plain Bearings Part 2: Method for Destructive Testing of Bond for Bearing Metal Layer Thicknesses Greater Than or Equal to 2 mm | |
| Metallic Multilayer Plain Bearings Part 3: Method for Non- Destructive Die Penetrant Testing | |
| Method for Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects | |
| Method for Calibrating Field Pyranometers by Comparison to a Reference Pyranometer | |
| Method for Calibration by Physical Measurement of Membrane Tanks and Prismatic Tanks in Ships for Carriage of Refrigerated Light-Hydrocarbon Fluids | |
| Method for Continuous Sampling of Liquified Natural Gas (LNG) in Transfer Pipelines | |
| Method for Corrosion Tests in Artificial Atmospheres at Very Low Concentrations of Polluting Gas(es) | |
| Method for Determination of Colour of Raw Natural Rubber (Colour Index Test) | |
| Method for Determination of Compression Values and Stiffness of Non-Prescriptive Graduated Support Hosiery | |
| Method for Determination of Stress-Optical Coefficient of Glass Part 1: Tensile Test | |
| Method for Determination of Stress-Optical Coefficient of Glass Part 2: Bending Test | |
| Method for Determination of Stresses in Glass-to- Glass Sealings | |
| Method for Determination of Thresholds of Hearing Using Sound Field Audiometry with Pure Tone and Narrow-Band Test Signals | |
| Method for Determination of Titanium Dioxide Content of Paper and Board | |
| Method for Estimation of Dirt and Shives in Bleached Pulp | |
| Method for Graphical presentation of the complex modulus of damping materials | |
| Method for Removal of Corrosion Products from Corrosion Test Specimens of Metals and Alloys | |
| Method for Salt Spray Corrosion Tests in Artificial Atmospheres | |
| Method for Statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid | |
| Method of Assessing, Testing and Reporting Characteristics and Performance of Combine Harvesters | |
| Method of specifying Aqueous dispersions of polyt etrafluoroethylene (PTFE) materials | |
| Method of test for Accuracy and precision of mechanical handpipettes of capacity less than 50 pL down to and including 10 pL | |
| Method of Test for Cone Proof Loading on Nuts | |
| Method of Test for Curing Compounds for Concrete | |
| Method of Test for Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to an Electrically Heated Wire Source | |
| Methods for Determination of Water Vapour Transmission Rate of Sheet Materials (Paper and Board) by Dynamic Sweep and Static Gas Methods | |
| Methods for Froth Flotation Testing of Hard Coal - Part 2: Evaluation of Flotation Characteristics | |
| Methods for Froth flotation testing of hard coal \x97 Part 1: Laboratory procedure | |
| Methods for Measurements in electrostatics - Part 1: Guide to basic electrostatics | |
| Methods for Measurements in Electrostatics Part 2: Test Methods | |
| Methods for Sampling and Testing Gelatine (Physical and Chemical Methods) | |
| Methods for Sampling for Legionella organisms in water and related materials | |
| Methods for Test for Determination of Properties of Cushioning Materials for Package Design Purposes | |
| Methods of Evaluating the Performance of Electromagnetic Flowmeters | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Sec. 1.4: Transmission Performance | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Sect. 1.3: Transmission Characteristics | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 1.1: General | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 1.2: Bacic Characteristics | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio-Relay Systems Section 2.1: General | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio-Relay Systems Section 2.3: RF Branching Networks | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio-Relay Systems Section 2.4: Transmitter/Receiver Including Modulator/Demodulato r | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 3.12: Overall System Performance | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 3.1: General | |
| Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 3.4: Low Noise Amplifier | |
| Methods of Measurement for Non-Broadcast Video Tape Recorders Part 1: General Video (NTSC/PAL) and Audio (Longitudinal) Characteristics | |
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity | |
| Miniaturization of Medical Diagnostic Images on Film | |
| Mooring Winches | |
| Motor Cycle Chains | |
| Natural Tracing Paper | |
| Non-Circular Steel Wire for Mechanical Springs | |
| Nuclear Instrumentation - Liquid-Scintillation Counting Systems - Performance Verification | |
| Nuclear Power Plants - Control Rooms - Operator Controls | |
| Oxygen Concentrators for Use with Medical Gas Pipeline Systems | |
| Packaging of Winding Wires Part 1: Containers for Round Winding Wires | |
| Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 2.1: Basic Dimensions | |
| Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 2.2: Specification for Returnable Spools Made from Thermoplastic Material | |
| Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 2.3: Specification for Non-Returnable Spools Made from Thermoplastic Material | |
| Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 3.1: Basic Dimensions | |
| Packaging of Winding Wires Part 3: Taper BArrelled Delivery Spools Section 3.2: Specification for Returnable Spools Made from Thermoplastic Material | |
| Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 3.3: Specification for Non-Returnable Spools Made from Thermoplastic Material | |
| Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 3.4: Basic Dimensions of Containers for Taper Barrelled Delivery Spools | |
| Packaging of Winding Wires Part 4: Methods of Test Section 4.1: Delivery Spools Made from Thermoplastic Material | |
| Packaging of Winding Wires Part 4: Methods of Test Section 4.2: Containers Made from Thermoplastic Material for Taper Barrelled Delivery Spools | |
| Pavements constructed with clay, concrete or natural stone paving units Part 101: Code of practice for the structural design of pavements using modular paving units | |
| Pavements constructed with clay, concrete or natural stone paving units Part 102: Installation of pavements using modular paving units \x96 Code of practice | |
| Pavements constructed with clay, natural stone or concrete pavers - Part 11: Code of practice for the opening, maintenance and reinstatement of pavements of concrete, clay and natural stone | |
| Pavements constructed with clay, natural stone or concrete pavers - Part 12: Guide to the structural design of trafficked pavements constructed on a bound base using concrete paving flags and... | |
| Pavements constructed with clay, natural stone or concrete pavers - Part 1: Guide for the structural design of heavy duty pavements constructed of clay pavers or precast concrete paving blocks... | |
| Pavements Constructed with Clay, Natural Stone or Concrete Pavers - Part 2: Guide for the Structural Design of Lightly Trafficked Pavements Constructed of Clay Pavers of Precast Concrete Paving Blocks... | |
| Pavements constructed with clay, natural stone or concrete pavers - Part 3: Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements | |
| Pavements Constructed with Clay, Natural Stone or Concrete Pavers - Part 6: Code of Practice for Laying Natural Stone, Precast Concrete and Clay Kerb Units | |
| Pavements constructed with clay, natural stone or concrete pavers - Part 7: Code of practice for the construction of pavements of natural stone setts and cobbles | |
| Pavements constructed with clay, natural stone or concrete pavers - Part 9: Code of practice for the construction of rigid pavements of clay pavers | |
| Pavements constructed with clay, natural stone or concrete pavers Part 10: Guide for the structural design of trafficked pavements constructed of natural stone setts | |
| Pavements constructed with clay, natural stone or concrete pavers Part 13: Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts... | |
| Pavements Constructed with Clay, Natural Stone or Concrete Pavers Part 3: Code of Practice for Laying Precast Concrete Paving Blocks and Clay Pavers for Flexible Pavements | |
| Pavements Constructed with Clay, Natural Stone or Concrete Pavers Part 4: Code of Practice for the Construction of Pavements of Precast Concrete Flags or Natural Stone Slabs | |
| Pavements constructed with clay, natural stone, or concrete pavers - Part 8: Guide for the structural design of lightly trafficked pavements of precast concrete flags and natural stone flags | |
| Performance and Testing of Teleprotection Equipment of Power Systems Part 1: Specification for Narrow-Band Command Systems | |
| Performance and Testing of Teleprotection Equipment of Power Systems Part 2: Analogue Comparison System | |
| Performance Standards in Building - Contents and Format of Standards for Evaluation of Performance | |
| Performance Standards in Building - Definition and Calculation of Area and Space Indicators | |
| Piston and/or Plunger Operated Volumetric Apparatus Part 1: Glossary of Terms | |
| Piston and/or Plunger Operated Volumetric Apparatus Part 2: Methods of Operation | |
| Piston and/or Plunger Operated Volumetric Apparatus Part 3: Methods of Test | |
| Piston and/or Plunger Operated Volumetric Apparatus Part 4: Specification for Conditions of Test, Safety and Supply | |
| Planning, design and installation of irrigation schemes - Part 1: Glossary of terms | |
| Planning, design and installation of irrigation schemes - Part 2: Guide for acquisition of site data | |
| Planning, design and installation of irrigation schemes - Part 3: Guide to irrigation water requirements | |
| Planning, design and installation of irrigation schemes - Part 4: Guide to water resources | |
| Planning, design and installation of irrigation schemes - Part 5: Guide for irrigation equipment | |
| Planning, design and installation of irrigation schemes - Part 6: Guide for feasibility and implementation procedures | |
| Plastics Windows Made from PVC-U Extruded Hollow Profiles | |
| Porosity and Pore Size Distribution of Materials - Part 1: Method of Evaluation by Mercury Porosimetry | |
| Porosity and Pore Size Distribution of Materials Part 4: Method of Evaluation by Liquid Expulsion | |
| Porosity and pore size distribution of materials. Part 2: Method of evaluation by gas adsorption | |
| Portland Limestone Cement | |
| Potato Storage Boxes for Mechanical Handling | |
| Prefilled Syringes Part 1: Specification for Glass Cylinders for Dental Local Anaesthetic Cartridges | |
| Prefilled Syringes Part 2: Specification for Plungers and Discs for Dental Local Anaesthetic Cartridges | |
| Press tools - Part 12: Elastomer pressure springs - General specification | |
| Press tools - Part 13: Elastomer pressure springs - Specification of accessories | |
| Press tools - Part 17: Guide bushes - Forms | |
| Press tools - Part 18: Guide bushes - Gliding bushes, plain, type 1 | |
| Press tools - Part 19: Guide bushes - Form B, ball cage bushes, plain, type 1 | |
| Press tools - Part 20: Guide bushes - Form C, gliding bushes, headed, type 1 | |
| Press tools - Part 21: Guide bushes - Form D, ball cage bushes, headed, type 1 | |
| Press tools - Part 22: Guide bushes - Form E, gliding bushes, flanged, type 1 | |
| Press tools - Part 23: Guide bushes - Form F, ball cage bushes, flanged, type 1 | |
| Press tools - Part 24: Guide bushes - Form G, gliding bushes, stepped, type 1 | |
| Press tools - Part 30: Specification for guide bushes: form B, ball cage bushes, plain, type 2 | |
| Press tools - Part 31: Specification for guide bushes: form E, gliding bushes, flanged, type 2 | |
| Press tools - Part 32: Specification for guide bushes: form F, ball cage bushes, flanged, type 2 | |
| Press tools - Part 7: Round punches with 60\xb0 conical head and straight shank | |
| Press Tools Part 10: Round Punches with 60 Degree Conical Head and Reduced Shank | |
| Press Tools Part 11: Wear Plates for Press Dies - Type A | |
| Press Tools Part 14: Punch Holder Shanks - Types A and B | |
| Press Tools Part 15: Punch Holder Shanks - Type C | |
| Press Tools Part 16: Punch Holder Shanks - Type D | |
| Press Tools Part 1: Punches - Nomenclature and Terminology | |
| Press Tools Part 25: Guide Pillars - Types | |
| Press Tools Part 26: Guide Pillars - Type A, Straight Pillars | |
| Press Tools Part 27: Guide Pillars - Type B, End-Locking Pillars | |
| Press Tools Part 28: Guide Pillars - Type C, Pillars with Taper Lead and Bush | |
| Press Tools Part 29: Guide Pillars - Type D, End-Locking Pillars with Flange | |
| Press Tools Part 33: Wear Plates for Press Dies, Type B | |
| Press Tools Part 4: Compression Springs with Rectangular Section - Housing Dimensions and Colour Coding | |
| Press Tools Part 5: Punches with Cylindrical Head and Reduced Shank | |
| Press Tools Part 6: Round Punches with Cylindrical Head and Straight Shank | |
| Press Tools Part 8: Round Matrixes | |
| Press Tools Part 9: Guides for Round Punches | |
| Pressure Regulators Used in Welding, Cutting and Related Processes with Compressed Gases up to 300 Bar | |
| Procedures for UK Registration for Open System Standards - Part 1: Procedures for the UK Name Registration Authority | |
| Provision of static guarding security services. Code of practice. Keyholding and response services. Provision of mobile security services. Code of practice. Provision of security services. Code of practice | |
| Radiation Protection Instrumentation - Portable Potential Alpha Energy Meter for Rapid Measurements in Mines | |
| Radiation protection instrumentation - Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring - Integrating assemblies | |
| Radiographic Cassettes | |
| Recommendations for Handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers\x92 premises | |
| Recommendations for the Packaging of Dangerous Goods for Transport | |
| Reconditioning of Used Safes | |
| Resilient Lining Materials for Removable Dentures Part 1: Specification for Short-Term Materials | |
| Resistance Thermometers and Thermocouples for the Measurement of Temperature in Tanks Containing Refrigerated Light Hydrocarbon Fluids | |
| Rotating Sprinklers for Irrigation Equipment Part 1: Specification for Design and Operational Requirements | |
| Rotating Sprinklers for Irrigation Equipment Part 2: Methods of Test for Uniformity of Distribution | |
| Rubber or plastics covered rollers - Part 0: Introduction | |
| Rubber or plastics covered rollers - Part 4: Requirements - Section 4.1 Specification for apparent hardness | |
| Rubber or plastics covered rollers - Part 4: Requirements - Section 4.2 Classification by surface finish | |
| Rubber or Plastics Covered Rollers Part 1: Glossary of Terms | |
| Rubber or Plastics Covered Rollers Part 2: Recommendations for Technical Information to Be Provided by the Purchaser | |
| Rubber or Plastics Covered Rollers Part 3: Methods of Test Section 3.1: Determination of Apparent Hardness (IRHD Method) | |
| Rubber or Plastics Covered Rollers Part 3: Methods of Test Section 3.2: Determination of Shore Hardness | |
| Rubber or Plastics Covered Rollers Part 3: Methods of Test Section 3.3: Determination of Apparent Hardness by the Pusey and Jones Method | |
| Rubber or Plastics Covered Rollers Part 4: Requirements Section 4.3: Specification for Dimensional Tolerances | |
| Rungs for Dog-Step Ladders | |
| Safety Requirements for Carry Cots and Similar Handled Products and Stands | |
| Safety Requirements for Children's Travel Cots of Internal Base Length Not Less Than 900 mm | |
| Safety Requirements for Wheeled Child Conveyances | |
| Selection and Application of Flowmeters for the Measurement of Fluid Flow in Closed Conduits | |
| Separating Transformers, Autotransformers, Variable Transformers and Reactors | |
| Shipborne Barges of All Series | |
| Ships' Windows and Side Scuttles | |
| Short-Circuit Current Calculation in Three-Phase a.c. Systems | |
| Single Phase Street Lighting Fuses (Cut-Outs) for Low-Voltage Public Electricity Distribution Systems - 25 A Rating for Highway Power Supplies and Street Furniture | |
| Social alarm system apparatus for connection to public switched telephone networks | |
| Sound Systems for Emergency Purposes | |
| Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire Part 1: Multicore cables | |
| Specification for Archival Quality Bookbinding Leather | |
| Specification for Combined transformers | |
| Specification for Compressed non-asbestos fibre jointing | |
| Specification for Data transfer between agricultural tractors and attached machinery (data bus protocol) | |
| Specification for Desiccant Activated Clay | |
| Specification for Designation and Nominal Sizes of Openings for Woven Wire Cloth, Perforated Plate and Electroformed Sheet for Industrial Screens | |
| Specification for Double braided ropes made from man-made fibre | |
| Specification for Electrical Safety of Domestic Gas Appliances | |
| Specification for Electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control | |
| Specification for Electronic Messaging Enabling the Application of BS ISO/IEC 10021 in the United Kingdom | |
| Specification for gas meter unions and adaptors | |
| Specification for Gun Cabinets | |
| Specification for Haemacytometer and Particle Counting Chambers | |
| Specification for Holding Down Bolts | |
| Specification for Insulating and sheathing materials for cables Part 12. Miscellaneous sheathing compounds Section 12.2 Harmonized cross-linked PVC types | |
| Specification for Interface dimensions of flat face \x93O\x94-ring seal hydraulic couplings | |
| Specification for Lead Chromate Pigments and Lead Chromate-Molybdate Pigments for Paints | |
| Specification for Lever Operated Knapsack Sprayers | |
| Specification for Limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs | |
| Specification for Low-voltage pole-mounting fuses (cut-outs) - 315 A Rating | |
| Specification for Low-voltage pole-mounting fuses (cut-outs) \x97 400 A rating | |
| Specification for Marking of Recycled Paper and Board | |
| Specification for Molecular Sieves of of Type 4A | |
| Specification for Polyethylene Film for Covering Silage | |
| Specification for Polyurethane (PUR) Foam Systems Suitable for Stabilization and Thermal Insulation of Cavity Walls with Masonry or Concrete Inner and Outer Leaves | |
| Specification for Precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems | |
| Specification for Preformed Cellular Polyethylene (PE) Materials for the Thermal Insulation of Pipework | |
| Specification for Protection of Electrical Devices Used on Small Craft to Prevent Ignition of Surrounding Flammable Gases | |
| Specification for Radio teleswitches for tariff and load control | |
| Specification for Remote Steering Systems for Single Outboard Motors of 15 kW to 40 kW Power for Small Craft | |
| Specification for Remote Steering Systems for Small Craft | |
| Specification for Rigid Stretchers | |
| Specification for Roofing Felts | |
| Specification for Safety Requirements for Children's Table-Mounted Chairs for Domestic Use | |
| Specification for Security seals | |
| Specification for Slotted Cheese Head Screws: Product Grade A | |
| Specification for Steel and copper alloy wafer check valves, single disk, spring-loaded type | |
| Specification for Steel Bearing Plates for Flat Bottom Railway Rails | |
| Specification for Symbols for Computer Applications in Ship Building and Marine Technology | |
| Specification for Television receivers and monitors for use in education and training | |
| Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage | |
| Specification for The verification of sound level meters Part 1. Comprehensive procedure | |
| Specification for Time Switches for Tariff and Load Control | |
| Specification for Underfeed Stokers | |
| Specification for Vehicles, directly propelled by energy derived from a fuel, capable of carrying children | |
| Specification for White PVC-U Extruded Hollow Profiles with Heat Welded Corner Joints for Plastics Windows: Materials Type B | |
| Specification. Automatic change-over contactors for emergency lighting systems | |
| Stainless Steel Needle Tubing for the Manufacture of Medical Devices | |
| Sterile, Single-Use Syringes, with or Without Needle, for Insulin Injection | |
| Supply Voltages of Traction Systems | |
| Symmetric Pair/Quad and Multicore Cables for Digital Communication | |
| Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers | |
| Tars for Road Purposes | |
| Telecontrol Equipment and Systems Part 1: General Considerations Section 1.1: General Principles | |
| Telecontrol Equipment and Systems Part 1: General Considerations Section 1.2: Guide for Specifications | |
| Telecontrol Equipment and Systems Part 1: General Considerations Section 1.3: Glossary | |
| Telecontrol Equipment and Systems Part 1: General Considerations Section 1.4: Guide for Basic Aspects of Telecontrol Data Transmission and Organization of Standards BS 7404: Part 5 and BS 7404: Part... | |
| Telecontrol Equipment and Systems Part 2: Operating Conditions Section 2.1: Specification for Classes of Environmental Conditions and Power Supplies | |
| Telecontrol Equipment and Systems Part 3: Specification for Interfaces (Electrical Characteristics) | |
| Telecontrol Equipment and Systems Part 4: Specification for Performance | |
| Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 5.1: Specification for Transmission Frame Formats | |
| Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 5.2: Specification for Link Transmission Procedures | |
| Terms for Dredgers | |
| Test Code for Acceptance of Steam Turbines | |
| Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machinery Part 1: Engineering Method for Free-Field Conditions Over a Reflecting Plane | |
| Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machinery Part 2: Survey Method | |
| Testing Venting Systems and Shields for Lead-Acid Starter Batteries | |
| Thermosetting Insulated Cables with Limited Circuit Integrity When Affected by Fire | |
| Thermostatic Radiator Valves Specification for Dimensions and Details on Connection | |
| Tools for moulding - Part 10: Specification for dimensions of support pillars | |
| Tools for Moulding - Part 3: Mould Guide Pillars, Straight and Shouldered, and Locating Guide Pillars, Shouldered | |
| Tools for Moulding Part 1: Bases - Locating Elements | |
| Tools for Moulding Part 2: Centring Sleeves | |
| Tools for Moulding Part 4: Mould Guide Bushes, Headed, and Locating Guide Bushes, Headed | |
| Tools for Moulding Part 5: Ejector Pins with Cylindrical Head - Dimensions | |
| Tools for Moulding Part 6: Flat Ejector Pins | |
| Tools for Moulding Part 7: Shouldered Ejector Pins | |
| Tools for Moulding Part 8: Angle Pins - Basic Dimensions | |
| Tools for Moulding Part 9: Ejector Sleeves with Cylindrical Head - Basic Series for General Purposes | |
| Tracked Changes (Redline) - Code of practice for the preparation, commissioning and maintenance of domestic central heating and cooling water systems | |
| Tracked Changes (Redline) - Elastic properties of flat, non-adhesive, extensible fabric bandages - Specification | |
| Tracked Changes (Redline) - Electric cables \x96 Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire Part... | |
| Tracked Changes (Redline) - Extruded cellular unplasticized white PVC (PVC-UE) profiles - Specification | |
| Tracked Changes (Redline) - Guide to durability of buildings and building elements, products and components | |
| Tracked Changes (Redline) - Reconditioning of used safes and secure safe cabinets \x97 Code of practice | |
| Tracked Changes (Redline) - Sampling for Legionella bacteria in water systems \x97 Code of practice | |
| Tracked Changes (Redline) - Underground fire hydrants - Surface box frames and covers - Specification | |
| Traction Transformers and Inductors | |
| Treatment of Water in Domestic Hot Water Central Heating Systems | |
| Underground Fire Hydrants and Surface Box Frames and Covers | |
| Use of Cables with a Rated Voltage Not Exceeding 450/750 V | |
| Validation of Arc Welding Equipment | |
| Valuing people through diversity and inclusion Code of practice for organizations | |
| Valves, Gauges and Other Safety Fittings for Application to Boilers and to Piping Installations for and in Connection with Boilers - Part 1: Specification for Valves, Mounting and Fittings | |
| Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers. Specification for safety valves | |
| Verification of Sound Level Meters Part 2: Shortened Procedure for Type 2 Sound Level Meters | |
| Verification of Sound Level Meters | |
| Voltage Transformers | |
| White PVC-U Extruded Hollow Profiles with Heat Welded Corner Joints for Plastics Windows: Materials Type A | |
| Windows and Side Scuttles for Fire- Resistant Constructions Part 1: B Class Divisions | |
| Worksheet for the Determination of Volume Fraction by Systematic Manual Point Count |
| << Prev | Next >> |