Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
359
360
361
362
363
364
365
366
367
368
369
370
371
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| A.C. ventilating fans and regulators for household and similar purposes \x96 Methods for measuring performance | |
| Alarm and electronic security systems Part 11-33: Electronic access control systems - Access control configuration based on Web services | |
| Alarm and electronic security systems Part 11-5: Electronic access control systems \x97 Open Supervised Device Protocol (OSDP) | |
| Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements | |
| Arc welding equipment Part 11: Electrode holders | |
| Arc welding equipment Part 13: Welding current return clamp | |
| Arc welding equipment Part 14: Calibration, validation and consistency testing | |
| Arc welding equipment Part 1: Welding power sources | |
| Arc welding equipment Part 2: Liquid cooling systems | |
| Arc welding equipment Part 3: Arc striking and stabilizing devices | |
| Arc welding equipment Part 4: Periodic inspection and testing | |
| Arc welding equipment Part 5: Wire feeders | |
| Arc welding equipment Part 7: Torches | |
| Arc welding equipment Part 8: Gas consoles for welding and plasma cutting systems | |
| Arc welding equipment Part 9: Installation and use | |
| Automatic Electrical Controls for Household and Similar Use Part 2-8: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements | |
| Automatic electrical controls Part 1: General requirements | |
| Automatic electrical controls Part 2-11: Particular requirements for energy regulators | |
| Automatic electrical controls Part 2-12: Particular requirements for electrically operated door locks | |
| Automatic electrical controls Part 2-13: Particular requirements for humidity sensing controls | |
| Automatic electrical controls Part 2-14: Particular requirements for electric actuators | |
| Automatic electrical controls Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
| Automatic electrical controls Part 2-22: Particular requirements for thermal motor protectors | |
| Automatic electrical controls Part 2-23: Particular requirements for electrical sensors and sensing elements | |
| Automatic electrical controls Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Automatic electrical controls Part 2-7: Particular requirements for timers and time switches | |
| Automatic electrical controls Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Automatic electrical controls Part 2-9: Particular requirements for temperature sensing controls | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements | |
| Cable networks for television signals, sound signals and interactive services Part 101-1: RF cabling for two-way home networks with all-digital channels load | |
| Cable networks for television signals, sound signals and interactive services Part 101-2: Performance requirements for signals delivered at the system outlet in operation with all-digital channels load | |
| Cable networks for television signals, sound signals and interactive services Part 106: Optical equipment for systems loaded with digital channels only | |
| Cable networks for television signals, sound signals and interactive services Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only | |
| Cable networks for television signals, sound signals and interactive services Part 115: In-building optical systems for broadcast signal transmissions | |
| Cable networks for television signals, sound signals and interactive services Part 11: Safety | |
| Cable networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable networks (TA 5) | |
| Circuit-Breakers for Equipment (CBE) | |
| Classification of environmental conditions Part 2-2: Environmental conditions appearing in nature - Precipitation and wind | |
| Classification of environmental conditions Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature | |
| Classification of environmental conditions Part 2-6: Environmental conditions appearing in nature \x97 Earthquake vibration and shock | |
| Classification of environmental conditions Part 2: Environmental conditions appearing in nature - Fauna and flora | |
| Classification of environmental conditions Part 3-0: Classification of groups of environmental parameters and their severities - Introduction | |
| Classification of environmental conditions Part 3-1: Classification of groups of environmental parameters and their severities - Storage | |
| Classification of environmental conditions Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling | |
| Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations | |
| Classification of environmental conditions Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations | |
| Classification of environmental conditions Part 3-6: Classification of groups of environmental parameters and their severities \x97 Ship environment | |
| Classification of environmental conditions Part 3-9: Classification of groups of environmental parameters and their severities \x97 Microclimates inside products | |
| Code for designation of colours | |
| Combined flexible materials for electrical insulation Part 1: Definitions and general requirements | |
| Comfort fans and regulators for household and similar purposes \x96 Methods for measuring performance | |
| Connectors for electronic equipment Part 7: Detail specification for 8-way, unshielded, free and fixed connectors | |
| Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis | |
| Digital audio interface Part 1: General | |
| Digital audio interface Part 3: Consumer applications | |
| Digital audio interface Part 5: Consumer application enhancement | |
| Electrical accessories - Cord sets and interconnection cord sets | |
| Electrical accessories \x97 Circuitbreakers for overcurrent protection for household and similar installations Part 3: Circuit-breakers for DC operation | |
| Electrical accessories \x97 Cord sets and interconnection cord sets | |
| Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals | |
| Electroacoustics - Audiometric equipment Part 3: Test signals of short duration | |
| Electroacoustics - Audiometric equipment Part 6: Instruments for the measurement of otoacoustic emissions | |
| Electroacoustics - Audiometric equipment Part 7: Instruments for the measurement of auditory evoked potentials | |
| Electroacoustics \x96 Sound calibrators | |
| Electromagnetic compatibility (EMC) Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | |
| Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A and subject... | |
| Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current =16 A per phase) | |
| Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase... | |
| Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | |
| Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | |
| Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | |
| Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques \x97 Radiated, radio-frequency, electromagnetic field immunity test | |
| Electromagnetic compatibility (EMC) Part 4-41: Testing and measurement techniques - Broadband radiated immunity tests | |
| Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | |
| Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments | |
| Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity standard for industrial environments | |
| Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for equipment in residential environments | |
| Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments | |
| Electromagnetic compatibility (EMC) Part 6-8: Generic standards \x97 Emission standard for professional equipment in commercial and light-industrial locations | |
| Expression of performance of electrochemical analyzers Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors | |
| Failure modes and effects analysis (FMEA and FMECA) | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive power control Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Non-wavelength-selec tive fibre optic branching devices Part 1: Generic specification | |
| Fire Hazard Testing - Part 2-10: Glowing/Hot-Wire Based Test Methods - Glow-Wire Apparatus and Common Test Procedure | |
| Fire hazard testing Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering | |
| Fire hazard testing Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source | |
| Fire hazard testing Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT) | |
| Fire hazard testing Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials | |
| Fire hazard testing Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials | |
| Fire hazard testing Part 4: Terminology concerning fire tests for electrotechnical products | |
| Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance | |
| Fire hazard testing Part 6-1: Smoke obscuration - General guidance | |
| Fire hazard testing Part 6-2: Smoke obscuration - Summary and relevance of test methods | |
| Fire hazard testing Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods | |
| Fire hazard testing Part 9-2: Surface spread of flame - Summary and relevance of test methods | |
| Fixed inductors for electromagnetic interference suppression Part 1: Generic specification | |
| Fixed inductors for electromagnetic interference suppression Part 2-1: Blank detail specification - Inductors for which safety tests are required | |
| Fixed inductors for electromagnetic interference suppression Part 2: Sectional specification on power line chokes | |
| Flexible insulating sleeving Part 2: Methods of test | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving \x96 Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving \x97 Sheet 214: Heatshrinkable, polyolefin sleeving, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving \x97 Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving \x97 Sheet 282: Heat-shrinkable, polyolefin sleeving \x97 Stress control | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving \x97 Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation | |
| High-voltage direct current (HVDC) transmission - Vocabulary | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 1: General requirements | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-11: Particular requirements for electrically-operate d food preparation appliances | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-18: Particular requirements for electric water heaters | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-1: Particular requirements for dry vacuum cleaners | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-3: Particular requirements for dishwashers | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-9: Particular requirements for electric hair care appliances | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise Part 2-16: Particular requirements for washer-dryers | |
| Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise Part 2-13: Particular requirements for cooking fume extractors | |
| Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise Part 2-17: Particular requirements for dry-cleaning robots | |
| Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise Part 2-2: Particular requirements for fan heaters | |
| Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise Part 2-4: Particular requirements for washing machines and spin extractors | |
| Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise Part 2-7: Particular requirements for fans | |
| Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers | |
| Household electric direct-acting room heaters \x97 Methods for measuring performance Part 2: Additional provisions for the measurement of the radiant factor | |
| Household electric direct-acting room heaters \x97 Methods for measuring performance Part 3: Additional provisions for the measurement of the radiation efficiency | |
| Household microwave ovens - Methods for measuring performance | |
| Industrial electroheating equipment \x97 Test methods for direct arc furnaces | |
| Industrial platinum resistance thermometers and platinum temperature sensors | |
| Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces | |
| Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test | |
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins... | |
| Insulation coordination for equipment within low-voltage supply systems Part 1: Principles, requirements and tests | |
| Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests | |
| Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements | |
| Lamps for road vehicles - Dimensional, electrical and luminous requirements | |
| Lamps, light sources and led packages for road vehicles \x96 Performance requirements | |
| Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC | |
| Live working \x97 Conductive clothing | |
| Low- voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements - Proximity devices with analogue output | |
| Low-voltage switchgear and controlgear Part 1: General rules | |
| Low-voltage switchgear and controlgear Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units | |
| Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters \x97 Semiconductor motor controllers, starters and soft-starter | |
| Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads | |
| Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches | |
| Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements \x97 Three-position enabling switches | |
| Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment | |
| Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | |
| Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment - Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment \x97 PCB terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Low-voltage switchgear and controlgear Part 9-1: Active arc-fault mitigation systems \x96 Arc quenching devices | |
| Low-voltage switchgear and controlgear Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices | |
| Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems | |
| Medical electrical equipment Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and... | |
| Medical Electrical Equipment Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment | |
| Medical electrical equipment Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment | |
| Medical electrical equipment Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment | |
| Modular order for the development of mechanical structures for electrical and electronic equipment practices Part 1: Generic standard | |
| Nuclear Power Plants - Control rooms - Design | |
| Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems | |
| Nuclear power plants - Instrumentation, control and electrical systems important to safety - Separation | |
| Optical fibre cables Part 1-101: Generic specification \x97 Basic optical cable test procedures \x97 Mechanical tests methods \x97 Tensile, method E1 | |
| Optical fibre cables Part 1-104: Generic specification \x97 Basic optical cable test procedures \x97 Mechanical tests method \x97 Impact, method E4 | |
| Optical fibre cables Part 1-110: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Kink, Method E10 | |
| Optical fibre cables Part 1-111: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Bend, method E11 | |
| Optical fibre cables Part 1-119: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Aeolian vibration, Method E19 | |
| Optical fibre cables Part 1-124: Generic specification \x97 Basic optical cable test procedures \x97 Mechanical tests methods \x97 Installation test for microduct cabling, Method E24 | |
| Optical fibre cables Part 1-133: Generic specifications \x97 Basic optical cable test procedures \x97 Mechanical test methods \x97 Multiple cable coiling and uncoiling performance, Method E33 | |
| Optical fibre cables Part 1-1: Generic specification - General | |
| Optical fibre cables Part 1-201: Generic specification \x97 Basic optical cable test procedures \x97 Environmental test methods \x97 Temperature cycling, method F1 | |
| Optical fibre cables Part 1-208: Generic specification - Basic optical cable test procedures - Environmental test methods - Pneumatic resistance, Method F8 | |
| Optical fibre cables Part 1-209: Generic specification - Basic optical cable test procedures - Environmental test methods - Ageing, method F9 | |
| Optical fibre cables Part 1-211: Generic specification \x97 Basic optical cable test procedures \x97 Environmental test methods \x97 Sheath shrinkage, method F11 | |
| Optical fibre cables Part 1-212: Generic specification \x97 Basic optical cable test procedures \x97 Environmental test methods \x97 Temperature cycling with cable elements fixed at both ends, Method F12 | |
| Optical fibre cables Part 1-213: Generic specification \x97 Basic optical cable test procedures \x97 Environmental test methods \x97 Microduct pressure withstand, method F13 | |
| Optical fibre cables Part 1-214: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable UV resistance test, Method F14 | |
| Optical fibre cables Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 | |
| Optical fibre cables Part 1-216: Generic specification - Basic optical cable test procedures - Environmental test methods - Compound flow (drip), Method F16 | |
| Optical fibre cables Part 1-217: Generic specification \x97 Basic optical cable test procedures \x97 Environmental test methods \x97 Cable shrinkage (fibre protrusion), Method F17 | |
| Optical fibre cables Part 1-218: Generic specification \x97 Basic optical cable test procedures \x97 Environmental test methods \x97 Mid-span temperature cycling test for exposed optical units, Method F18 | |
| Optical fibre cables Part 1-219: Generic specification - Basic optical cable test procedures - Material compatibility test, method F19 | |
| Optical fibre cables Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods | |
| Optical fibre cables Part 1-23: Generic specification \x97 Basic optical cable test procedures \x97 Cable element test methods | |
| Optical fibre cables Part 1-2: Generic specification \x97 Basic optical cable test procedures \x97 General guidance | |
| Optical fibre cables Part 1-301: Generic specification - Basic optical cable test procedures - Cable elements test methods - Bend test, method G1 | |
| Optical fibre cables Part 1-303: Generic specification - Basic optical cable test procedures - Ribbon dimensions - Aperture gauge, method G3 | |
| Optical fibre cables Part 1-305: Generic specification \x97 Basic optical cable test procedures \x97 Cable element test methods \x97 Ribbon tear (separability), Method G5 | |
| Optical fibre cables Part 1-306: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon torsion, Method G6 | |
| Optical fibre cables Part 1-307: Generic specification \x97 Basic optical cable test procedures \x97 Cable element test methods \x97 Tube kinking, method G7 | |
| Optical fibre cables Part 1-308: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon residual twist test, method G8 | |
| Optical fibre cables Part 1-309: Generic specification - Basic optical cable test procedures - Cable element test methods - Bleeding and evaporation of filling or flooding compounds, Method G9 | |
| Optical fibre cables Part 1-310: Generic specification - Basic optical cable test procedures - Cable element test methods - Strippability, method G10 | |
| Optical fibre cables Part 1-311: Generic specification \x97 Basic optical cable test procedures \x97 Cable element test methods \x97 Tensile strength and elongation test for cable elements, Method G11A | |
| Optical fibre cables Part 1-312: Generic specification \x97 Basic optical cable test procedures \x97 Cable element test methods \x97 Elongation test for buffer tubes at low temperature, Method G11B | |
| Optical fibre cables Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon | |
| Optical fibre cables Part 1-401: Generic specification \x97 Basic optical cable test procedures \x97 Electrical test methods \x97 Short-circuit test (for OPGW, OPPC and OPAC), Method H1 | |
| Optical fibre cables Part 1-402: Generic specification - Basic optical cable test procedures - Electrical test methods - Lightning test (for OPGW, OPPC and OPAC), Method H2 | |
| Optical fibre cables Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3 | |
| Optical fibre cables Part 1-404: Generic specification \x97 Basic optical cable test procedures \x97 Electrical test methods \x97 Current-temperature test, method H4 | |
| Optical fibre cables Part 1\x96220: Generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20 | |
| Optical fibre cables Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables | |
| Optical fibre cables Part 2-11: Indoor cables \x96 Detailed specification for simplex and duplex cables for use in premises cabling | |
| Optical fibre cables Part 2-20: Indoor cables - Family specification for multi-fibre optical cables | |
| Optical fibre cables Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Optical fibre cables Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies | |
| Optical fibre cables Part 2-23: Indoor cables - Detail specification for multi-fibre cables for use in MPO connector terminated cable assemblies | |
| Optical fibre cables Part 2-24: Indoor cables - Detail specification for multiple multi-fibre unit cables for use in MPO connector terminated breakout cable assemblies | |
| Optical fibre cables Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies | |
| Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Optical fibre cables Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Optical fibre cables Part 3-12: Outdoor cables \x97 Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling | |
| Optical fibre cables Part 3-40: Outdoor cables \x97 Family specification for cables for storm and sanitary sewers | |
| Optical fibre cables Part 3-70: Outdoor cables \x97 Family specification for outdoor optical fibre cables for rapid/multiple deployment | |
| Optical fibre cables Part 3: Outdoor cables - Sectional specification | |
| Optical fibre cables Part 4-20: Sectional specification \x96 Aerial optical cables along electrical power lines \x96 Family specification for ADSS (all dielectric self-supported) optical cables | |
| Optical fibre cables Part 4-30: Aerial optical cables along electrical power lines - Family specification for optical phase conductor (OPPC) optical cables | |
| Optical fibre cables Part 4: Sectional specification - Aerial optical cables along electrical power lines | |
| Optical fibre cables Part 6-10: Indoor-outdoor cables \x97 Family specification for universal indoor-outdoor cables | |
| Optical fibre cables Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables | |
| Optical fibre cables Part 6-30: Indoor-outdoor cables \x97 Family specification for weatherised indoor cables | |
| Optical fibre cables Part 6: Indoor-outdoor cables - Sectional specification for indoor-outdoor cables | |
| Optical Fibres - Part 1-22: Measurement Methods and Test Procedures - Length Measurement | |
| Optical fibres Part 1-1: Measurement methods and test procedures - General and guidance | |
| Optical fibres Part 1-31: Measurement methods and test procedures \x96 Tensile strength | |
| Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability | |
| Optical fibres Part 1-34: Measurement methods and test procedures - Fibre curl | |
| Optical fibres Part 1-40: Attenuation measurement methods | |
| Optical fibres Part 1-41: Measurement methods and test procedures - Bandwidth | |
| Optical fibres Part 1-44: Measurement methods and test procedures - Cut-off wavelength | |
| Optical fibres Part 1-45: Measurement methods and test procedures \x96 Mode field diameter | |
| Optical fibres Part 1-46: Measurement methods and test procedures \x97 Monitoring of changes in attenuation | |
| Optical fibres Part 1-47: Measurement methods and test procedures - Macrobending loss | |
| Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay | |
| Optical fibres Part 1-54: Measurement methods and test procedures - Gamma irradiation | |
| Optical fibres Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres | |
| Optical fibres Part 2-40: Product specifications \x97 Sectional specification for category A4 multimode fibres | |
| Optical fibres Part 2-50: Product specifications - Sectional specification for class B single-mode fibres | |
| Optical fibres Part 2: Product specifications - General | |
| Overhead line structures - Loading tests | |
| Passive filter units for electromagnetic interference suppression Part 3: Passive filter units for which safety tests are appropriate | |
| Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Photovoltaic devices Part 10: Methods of linear dependence and linearity measurements | |
| Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics | |
| Photovoltaic devices Part 2: Requirements for photovoltaic reference devices | |
| Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Photovoltaic devices Part 4: Reference solar devices - Procedures for establishing calibration traceability | |
| Photovoltaic devices Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method | |
| Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices | |
| Photovoltaic devices Part 9: Classification of solar simulator characteristics | |
| Plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 3: Polycarbonate (PC) films used for electrical insulation | |
| Plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propy lene (FEP) films used for electrical insulation | |
| Plastic films for electrical purposes Part 3: Specifications for individual materials \x97 Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors | |
| Plastic films for electrical purposes Part 3: Specifications for individual materials Sheets 4: Polyimide films used for electrical insulation | |
| Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 1: Generic specification - General requirements and test methods | |
| Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 2-8: Detail specification for cable assemblies for radio and TV receivers \x97 Frequency range up to 3000 MHz, Screening class A++, IEC 61169-47... | |
| Radio frequency and coaxial cable assemblies Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 3-3: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 3-4: Detail specification for semi-flexible cable assemblies (Jumper) \x97 Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies | |
| Radio frequency and coaxial cable assemblies Part 4-2: Detail specification for semi rigid cable assemblies (jumper) Frequency range up to 6000 MHz, type 50-9 semi-rigid coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 4-3: Detail specification for semi-rigid cable assemblies - Frequency range up to 6 000 MHz, type 50-12 low loss semi-rigid coaxial cable | |
| Radio frequency and coaxial cable assemblies Part 4: Sectional specification for semi-rigid coaxial cable assemblies | |
| Rotating electrical machines \x97 Test methods and apparatus for the measurement of the operational characteristics of brushes | |
| Rules for steam turbine thermal acceptance tests Part 0: Wide range of accuracy for various types and sizes of turbines | |
| Rules for steam turbine thermal acceptance tests Part 3: Thermal performance verification tests of retrofitted steam turbines | |
| Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information | |
| Safety of laser products Part 4: Laser guards | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring | |
| Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-011: Particular requirements for refrigerating equipment | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular requirements for equipment having testing or measuring circuits | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains... | |
| Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength | |
| Safety requirments for electrical equipment for measurement, control and laboratory use Part 2- 032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement | |
| Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) | |
| Semiconductor devices - Mechanical and climatic test methods Part 10: Mechanical shock - device and subassembly | |
| Semiconductor devices - Mechanical and climatic test methods Part 12: Vibration, variable frequency | |
| Semiconductor Devices - Mechanical and Climatic Test Methods Part 13: Salt Atmosphere | |
| Semiconductor devices - Mechanical and climatic test methods Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) | |
| Semiconductor devices - Mechanical and climatic test methods Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level | |
| Semiconductor devices - Mechanical and climatic test methods Part 37: Board level drop test method using an accelerometer | |
| Semiconductor devices - Mechanical and climatic test methods Part 41: Standard reliability testing methods of non-volatile memory devices | |
| Semiconductor devices - Mechanical and climatic test methods Part 5: Steady-state temperature humidity bias life test | |
| Semiconductor devices \x97 Mechanical and climatic test methods Part 15: Resistance to soldering temperature for through-hole mounted devices | |
| Semiconductor devices \x97 Mechanical and climatic test methods Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat | |
| Semiconductor devices \x97 Mechanical and climatic test methods Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing | |
| Semiconductor devices \x97 Mechanical and climatic test methods Part 34-1: Power cycling test for power semiconductor module | |
| Semiconductor devices \x97 Mechanical and climatic test methods Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components | |
| Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation | |
| Semiconductor devices Part 15: Discrete devices - Isolated power semiconductor devices | |
| Semiconductor devices Part 16-6: Microwave integrated circuits \x97 Frequency multipliers | |
| Semiconductor devices Part 16-7: Microwave integrated circuits - Attenuators | |
| Semiconductor devices Part 16-8: Microwave integrated circuits - Limiters | |
| Semiconductor devices Part 16-9: Microwave integrated circuits - Phase shifters | |
| Semiconductor devices Part 17: Magnetic and capacitive coupler for basic and reinforced insulation | |
| Semiconductor devices Part 5-5: Optoelectronic devices \x97 Photocouplers | |
| Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1 000 V Part 1: General | |
| Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1 000 V Part 2: Ageing test and destruction test | |
| Specification for plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation | |
| Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic control devices | |
| Test on gases evolved during combustion of materials from cables Part 3: Measurement of low level of halogen content by ion chromatography | |
| Thermal-links - Requirements and application guide | |
| Thermistors - Directly heated positive temperature coefficient Part 1: Generic specification | |
| Thyristor valves for high voltage direct current (HVDC) power transmission Part 3: Essential ratings (limiting values) and characteristics | |
| Tracked Change (Redline) - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in attenuation | |
| Tracked Changes (Redline) - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements | |
| Tracked Changes (Redline) - Arc welding equipment - Part 1: Welding power sources | |
| Tracked Changes (Redline) - Arc welding equipment \x97 Part 11: Electrode holders | |
| Tracked Changes (Redline) - Arc welding equipment Part 2: Liquid cooling systems | |
| Tracked Changes (Redline) - Arc welding equipment Part 4: Periodic inspection and testing | |
| Tracked Changes (Redline) - Arc welding equipment Part 5: Wire feeders | |
| Tracked Changes (Redline) - Arc welding equipment Part 9: Installation and use | |
| Tracked Changes (Redline) - Automatic electrical controls - Part 2-11: Particular requirements for energy regulators | |
| Tracked Changes (Redline) - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Tracked Changes (Redline) - Automatic electrical controls \x97 Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Tracked Changes (Redline) - Automatic electrical controls Part 2-12: Particular requirements for electrically operated door locks | |
| Tracked Changes (Redline) - Automatic electrical controls Part 2-13: Particular requirements for humidity sensing controls | |
| Tracked Changes (Redline) - Automatic electrical controls Part 2-14: Particular requirements for electric actuators | |
| Tracked Changes (Redline) - Automatic electrical controls Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | |
| Tracked Changes (Redline) - Cable networks for television signals, sound signals and interactive services - Part 11: Safety | |
| Tracked Changes (Redline) - Cable networks for television signals, sound signals and interactive services \x97 Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only | |
| Tracked Changes (Redline) - Cable networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable networks (TA 5) | |
| Tracked Changes (Redline) - Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind | |
| Tracked Changes (Redline) - Classification of environmental conditions - Part 3-6: Classification of groups of environmental parameters and their severities \x97 Ship environment | |
| Tracked Changes (Redline) - Classification of environmental conditions - Part 3-9: Classification of groups of environmental parameters and their severities - Microclimates inside products | |
| Tracked Changes (Redline) - Classification of environmental conditions \x97 Part 2-6: Environmental conditions appearing in nature \x97 Earthquake vibration and shock | |
| Tracked Changes (Redline) - Classification of environmental conditions Part 3-1: Classification of groups of environmental parameters and their severities - Storage | |
| Tracked Changes (Redline) - Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities \x96 Stationary use at weatherprotected locations | |
| Tracked Changes (Redline) - Classification of environmental conditions Part 3-4: Classification of groups of environmental parameters and their severities \x96 Stationary use at non-weatherprotected locations | |
| Tracked Changes (Redline) - Combined flexible materials for electrical insulation - Definitions and general requirements | |
| Tracked Changes (Redline) - Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis | |
| Tracked Changes (Redline) - Digital audio interface - Part 1: General | |
| Tracked Changes (Redline) - Digital audio interface - Part 3: Consumer applications | |
| Tracked Changes (Redline) - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation | |
| Tracked Changes (Redline) - Electrical accessories - Cord sets and interconnection cord sets | |
| Tracked Changes (Redline) - Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals | |
| Tracked Changes (Redline) - Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current =16 A per phase) | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques \x97 Electrostatic discharge immunity test | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques \x97 Radiated, radio-frequency, electromagnetic field immunity test | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | |
| Tracked Changes (Redline) - Electromagnetic compatibility (EMC) Part 6-3: Generic standards \x97 Emission standard for equipment in residential environments | |
| Tracked Changes (Redline) - Failure modes and effects analysis (FMEA and FMECA) | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices | |
| Tracked Changes (Redline) - Fibre optic interconnecting devices and passive components - Non-wavelength-selec tive fibre optic branching devices - Part 1: Generic specification | |
| Tracked Changes (Redline) - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT) | |
| Tracked Changes (Redline) - Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance | |
| Tracked Changes (Redline) - Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods | |
| Tracked Changes (Redline) - Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods | |
| Tracked Changes (Redline) - Fire hazard testing \x97 Part 2-10: Glowing/hot-wire based test methods \x97 Glow-wire apparatus and common test procedure | |
| Tracked Changes (Redline) - Fire hazard testing Part 6-2: Smoke obscuration - Summary and relevance of test methods | |
| Tracked Changes (Redline) - Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required | |
| Tracked Changes (Redline) - Flexible insulating sleeving - Part 2: Methods of test | |
| Tracked Changes (Redline) - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose | |
| Tracked Changes (Redline) - Flexible insulating sleeving \x97 Part 3: Specifications for individual types of sleeving \x97 Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive | |
| Tracked Changes (Redline) - Flexible insulating sleeving \x97 Part 3: Specifications for individual types of sleeving \x97 Sheet 282: Heat-shrinkable, polyolefin sleeving \x97 Stress control | |
| Tracked Changes (Redline) - High-voltage direct current (HVDC) transmission - Vocabulary | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for cooking fume extractors | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-7: Particular requirements for fans | |
| Tracked Changes (Redline) - Household and similar electrical appliances - Test code for the determination of airnorne acoustical noise - Part 2-11: Particular requirements for electrically-operate d food preparation appliances... | |
| Tracked Changes (Redline) - Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise \x97 Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills... | |
| Tracked Changes (Redline) - Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise \x97 Part 2-3: Particular requirements for dishwashers | |
| Tracked Changes (Redline) - Household microwave ovens - Methods for measuring performance | |
| Tracked Changes (Redline) - Industrial electroheating equipment \x97 Test methods for direct arc furnaces | |
| Tracked Changes (Redline) - Industrial platinum resistance thermometers and platinum temperature sensors | |
| Tracked Changes (Redline) - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test | |
| Tracked Changes (Redline) - Insulation coordination for equipment within low-voltage supply systems Part 1: Principles, requirements and tests | |
| Tracked Changes (Redline) - Lamps and light sources for road vehicles \x97 Dimensional, electrical and luminous requirements | |
| Tracked Changes (Redline) - Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC | |
| Tracked Changes (Redline) - Low- voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Tracked Changes (Redline) - Low- voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Proximity devices with analogue output | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starter | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear \x97 Part 6-1: Multiple function equipment \x97 Transfer switching equipment | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear Part 1: General rules | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment \x96 PCB terminal blocks for copper conductors | |
| Tracked Changes (Redline) - Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light... | |
| Tracked Changes (Redline) - Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems | |
| Tracked Changes (Redline) - Nuclear power plants - Instrumentation, control and electrical systems important to safety - Separation | |
| Tracked Changes (Redline) - Optical fibre cables - Part 1-1: Generic specification - General | |
| Tracked Changes (Redline) - Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon | |
| Tracked Changes (Redline) - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables | |
| Tracked Changes (Redline) - Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables | |
| Tracked Changes (Redline) - Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies | |
| Tracked Changes (Redline) - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment | |
| Tracked Changes (Redline) - Optical fibre cables \x97 Part 1-402: Generic specification \x97 Basic optical cable test procedures \x97 Electrical test methods \x97 Lightning test (for OPGW, OPPC and OPAC),... | |
| Tracked Changes (Redline) - Optical fibre cables \x97 Part 2-22: Indoor cables \x97 Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies | |
| Tracked Changes (Redline) - Optical fibre cables \x97 Part 3: Outdoor cables \x97 Sectional specification | |
| Tracked Changes (Redline) - Optical fibre cables Part 1-22: Generic specification \x96 Basic optical cable test procedures \x96 Environmental test methods | |
| Tracked Changes (Redline) - Optical fibre cables Part 2-11: Indoor cables \x96 Detailed specification for simplex and duplex cables for use in premises cabling | |
| Tracked Changes (Redline) - Optical fibre cables Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling | |
| Tracked Changes (Redline) - Optical fibre cables Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies | |
| Tracked Changes (Redline) - Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling | |
| Tracked Changes (Redline) - Optical fibre cables Part 4-20: Sectional specification \x96 Aerial optical cables along electrical power lines \x96 Family specification for ADSS (all dielectric self-supported) optical cables | |
| Tracked Changes (Redline) - Optical fibre cables Part 4: Sectional specification - Aerial optical cables along electrical power lines | |
| Tracked Changes (Redline) - Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement | |
| Tracked Changes (Redline) - Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth | |
| Tracked Changes (Redline) - Optical fibres \x97 Part 1-34: Measurement methods and test procedures \x97 Fibre curl | |
| Tracked Changes (Redline) - Optical fibres \x97 Part 1-44: Measurement methods and test procedures \x97 Cut-off wavelength | |
| Tracked Changes (Redline) - Optical fibres Part 1-31: Measurement methods and test procedures \x96 Tensile strength | |
| Tracked Changes (Redline) - Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability | |
| Tracked Changes (Redline) - Optical fibres Part 1-40: Attenuation measurement methods | |
| Tracked Changes (Redline) - Optical fibres Part 1-45: Measurement methods and test procedures \x96 Mode field diameter | |
| Tracked Changes (Redline) - Optical fibres Part 1-47: Measurement methods and test procedures - Macrobending loss | |
| Tracked Changes (Redline) - Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay | |
| Tracked Changes (Redline) - Optical fibres Part 1-54: Measurement methods and test procedures - Gamma irradiation | |
| Tracked Changes (Redline) - Optical fibres Part 2-10: Product specifications \x96 Sectional specification for category A1 multimode fibres | |
| Tracked Changes (Redline) - Optical fibres Part 2-50: Product specifications - Sectional specification for class B single-mode fibres | |
| Tracked Changes (Redline) - Overhead line structures - Loading tests | |
| Tracked Changes (Redline) - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate | |
| Tracked Changes (Redline) - Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices | |
| Tracked Changes (Redline) - Photovoltaic devices \x97 Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Tracked Changes (Redline) - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors | |
| Tracked Changes (Redline) - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polycarbonate (PC) films used for electrical insulation | |
| Tracked Changes (Redline) - Plastic films for electrical purposes - Part 3: Specifications for individual materials Sheets 4: Polyimide films used for electrical insulation | |
| Tracked Changes (Redline) - Plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 7. Fluoroethylene-propy lene (FEP) films used for electrical insulation | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies \x97 Part 3: Sectional specification for semi-flexible coaxial cable assemblies | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies \x97 Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies \x97 Part 4: Sectional specification for semi-rigid coaxial cable assemblies | |
| Tracked Changes (Redline) - Radio frequency and coaxial cable assemblies Part 1: Generic specification - General requirements and test methods | |
| Tracked Changes (Redline) - Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines | |
| Tracked Changes (Redline) - Rules for steam turbine thermal acceptance tests \x97 Part 0: Wide range of accuracy for various types and sizes of turbines | |
| Tracked Changes (Redline) - Safety of laser products - Part 4: Laser guards | |
| Tracked Changes (Redline) - Safety requirements for electrical equipment for measurement, control and laboratory use \x97 Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization | |
| Tracked Changes (Redline) - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials | |
| Tracked Changes (Redline) - Safety requirements for electrical equipment for measurement, control, and laboratory use \x97 Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and... | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - device and subassembly | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods Part 17: Neutron irradiation | |
| Tracked Changes (Redline) - Semiconductor devices - Mechanical and climatic test methods Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) | |
| Tracked Changes (Redline) - Semiconductor devices \x96 Mechanical and climatic test methods Part 18: Ionizing radiation (total dose) | |
| Tracked Changes (Redline) - Semiconductor devices \x97 Part 15: Discrete devices \x97 Isolated power semiconductor devices | |
| Tracked Changes (Redline) - Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1 000 V - Part 1: General | |
| Tracked Changes (Redline) - Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1 000 v - Part 2: Ageing test... | |
| Tracked Changes (Redline) - Specification for plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used... | |
| Tracked Changes (Redline) - Thermal-links - Requirements and application guide | |
| Tracked Changes (Redline) - Winding wires - Test methods - Part 3: Mechanical properties | |
| Tracked Changes (Redlines) - Household and similar electrical appliances \x97 Test code for the determination of airborne acoustical noise \x97 Part 2-4: Particular requirements for washing machines and spin extractors... | |
| Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and Test Procedures | |
| Vulcanized fibre for electrical purposes Part 1: Definitions and general requirements | |
| Vulcanized fibre for electrical purposes Part 2: Methods of test | |
| Vulcanized fibre for electrical purposes Part 3: Specifications for individual materials - Sheet 1: Flat sheets | |
| Winding wires \x97 Test methods Part 1: General | |
| Winding wires \x97 Test methods Part 3: Mechanical properties |
| << Prev | Next >> |