Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
300
310
320
330
340
350
360
362
363
364
365
366
367
368
369
370
371
372
373
374
380
390
400
410
420
430
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) | |
| Audio/video, information and communication technology equipment Part 1: Safety requirements | |
| Audio/video, information and communication technology equipment Part 3: Safety aspects for DC power transfer through communication cables and ports | |
| Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT) | |
| Bi-directional grid connected power converters Part 1: General requirements | |
| Bi-directional grid-connected power converters Part 2: Interface of GCPC and distributed energy resources | |
| Building intercom systems Part 2: Requirements for advanced security building intercom systems (ASBIS) | |
| Building intercom systems Part 3-1: Application guidelines - General | |
| Building intercom systems Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) | |
| Cable management systems - Cable ties for electrical installations | |
| Calibration of tuneable laser sources | |
| Cause and effect matrix | |
| Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance... | |
| Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification | |
| Concentrator photovoltaic (CPV) solar cells and cell on carrier (CoC) assemblies \x97 Qualification | |
| Conductors for overhead lines \x97 Aluminium and aluminium alloy wires for concentric lay stranded conductors | |
| Content management - Monitoring and management of personal digital content | |
| Control systems in the process industry - Electrical and instrumentation loop check | |
| DC or AC supplied electronic controlgear for LED modules \x97 Performance requirements | |
| Dependability of new products containing reused parts and life-extended products | |
| Dependability reviews during the life cycle | |
| Desktop and notebook computers - Measurement of energy consumption | |
| Determination of certain substances in electrotechnical products Part 11: Tris(2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS) | |
| Determination of certain substances in electrotechnical products Part 12: Simultaneous determination - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry | |
| Determination of certain substances in electrotechnical products Part 2: Disassembly, disjointment and mechanical sample preparation | |
| Determination of certain substances in electrotechnical products Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD... | |
| Determination of certain substances In electrotechnical products Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC)... | |
| Determination of certain substances in electrotechnical products Part 9: Hexabromocyclododeca ne in polymers by chromatography-mass spectrometry (GC-MS) | |
| Device embedding assembly technology Part 1: Generic specification for device embedded substrates | |
| Device embedding assembly technology Part 2-5: Guidelines \x97 Implementation of a 3D data format for device embedded substrate | |
| Device embedding assembly technology Part 2-602: Guideline for stacked electronic module - Evaluation method of inter-module electrical connectivity | |
| Device embedding assembly technology Part 2-603: Guideline for stacked electronic module - Test method of intra-module electrical connectivity | |
| Dielectric and resistive properties of solid insulating materials Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods | |
| Dielectric and resistive properties of solid insulating materials Part 2-2: Relative permittivity and dissipation factor \x97 High frequencies (1 MHz to 300 MHz) \x97 AC methods | |
| Dielectric and resistive properties of solid insulating materials Part 2-3: Relative permittivity and dissipation factor - Contact electrode method for insulating films - AC methods | |
| Dielectric and resistive properties of solid insulating materials Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials | |
| Dielectric and resistive properties of solid insulating materials Part 3-12: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for casting resins | |
| Dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC methods) \x97 Volume resistance and volume resistivity \x97 General method | |
| Dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC methods) \x97 Surface resistance and surface resistivity | |
| Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures | |
| Digital addressable lighting interface - Part 102: General requirements - Control gear | |
| Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) | |
| Digital addressable lighting interface Part 101: General requirements - System components | |
| Digital addressable lighting interface Part 103: General requirements - Control devices | |
| Digital addressable lighting interface Part 104: General requirements - Wireless and alternative wired system components | |
| Digital addressable lighting interface Part 105: Particular requirements for control gear and control devices - Firmware Transfer | |
| Digital addressable lighting interface Part 150: Particular requirements \x97 Auxiliary power supply | |
| Digital addressable lighting interface Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) | |
| Digital addressable lighting interface Part 216: Particular requirements for control gear - Load referencing (device type 15) | |
| Digital addressable lighting interface Part 217: Particular | |
| Digital addressable lighting interface Part 218: Particular requirements for control gear - Dimming curve selection (device type 17) | |
| Digital addressable lighting interface Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19) | |
| Digital addressable lighting interface Part 221: Particular requirements for control gear - Demand response (device type 20) | |
| Digital addressable lighting interface Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21) | |
| Digital addressable lighting interface Part 224: Particular requirements for control gear \x96 Non-replaceable light source (device type 23) | |
| Digital addressable lighting interface Part 250: Particular requirements - Integrated power supply (device type 49) | |
| Digital addressable lighting interface Part 251: Particular requirements \x97 Memory bank 1 extension (device type 50) | |
| Digital addressable lighting interface Part 252: Particular requirements \x97 Energy reporting (device type 51) | |
| Digital addressable lighting interface Part 253: Particular requirements \x97 Diagnostics and maintenance (device type 52) | |
| Digital addressable lighting interface Part 305: Particular requirements - Input devices - Colour sensor | |
| Digital addressable lighting interface Part 306: Particular requirements - Input devices - General purpose sensor | |
| Digital addressable lighting interface Part 332: Particular requirements \x96 Input devices \x96 Feedback | |
| Digital addressable lighting interface Part 333: Particular requirements for control devices - Manual configuration (feature type 33) | |
| Digital addressable lighting interface Part 351: Particular requirements \x97 Control devices \x97 Luminaire-mounted control devices | |
| Dynamic modules \x97 Generic specification | |
| Dynamic modules Part 1: Performance standards - General conditions | |
| Dynamic modules Part 2-1: Reliability qualification - Test template | |
| Dynamic modules Part 3-3: Performance specification templates \x97 Wavelength selective switches | |
| Dynamic modules Part 3-4: Performance specification templates - Multicast optical switches | |
| Dynamic modules Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement | |
| Electric clothes washer-dryers for household use \x97 Methods for measuring the performance | |
| Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics | |
| Electric energy storage (EES) systems Part 4-2: Guidance on environmental issues - Assessment of the environmental impact of battery failure in an electrochemical based storage system | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-6: Particular requirements for hand-held hammers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-7: Particular requirements for hand-held spray guns | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-8: Particular requirements for shredders/chippers | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety Part 3-9: Particular requirements for transportable mitre saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x96 Safety Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-12: Particular requirements for hand-held concrete vibrators | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-5: Particular requirements for transportable band saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 3-7: Particular requirements for transportable wall saws | |
| Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery \x97 Safety Part 4-5: Particular requirements for grass shears | |
| Electric vehicle battery swap system Part 1: General and guidance | |
| Electric vehicle battery swap system Part 2: Safety requirements | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Part 1: Product family standard | |
| Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) Part 3: Resistance welding equipment | |
| Electrical Energy Storage (EES) systems Part 1: Vocabulary | |
| Electrical energy storage (EES) systems Part 2-1: Unit parameters and testing methods - General specification | |
| Electrical energy storage (EES) systems Part 5-1: Safety considerations for grid-integrated EES systems - General specification | |
| Electrical energy storage (EES) systems Part 5-2: Safety requirements for grid-integrated EES systems \x97 Electrochemical-base d systems | |
| Electrically operated spray seats for household and similar use - Methods for measuring the performance - General test methods of spray seats | |
| Electrolyte and water for vented lead acid accumulators Part 1: Requirements for electrolyte | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 3: Data | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 6: Packaged or finished devices | |
| Electronic components \x96 Long-term storage of electronic semiconductor devices Part 4: Storage | |
| Electronic components \x96 Long-term storage of electronic semiconductor devices Part 9: Special cases | |
| Electronic components \x97 Long-term storage of electronic semiconductor devices Part 7: Micro-electromechani cal devices | |
| Electronic components \x97 Long-term storage of electronic semiconductor devices Part 8: Passive electronic devices | |
| EMC IC modelling Part 1: General modelling framework | |
| EMC IC modelling Part 6: Models of integrated circuits for Pulse immunity behavioural simulation \x97 Conducted Pulse Immunity (ICIM-CPI) | |
| Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps \x96 Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear | |
| Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear | |
| Energy performance of lamp controlgear Part 3: Controlgear for tungsten-halogen lamps and LED light sources \x96 Method of measurement to determine the efficiency of controlgear | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language Part 1: Architecture and general requirements | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 2: Semantics libraries | |
| Engineering data exchange format for use in industrial automation systems engineering - Automation markup language Part 5: Communication | |
| Engineering data exchange format for use in industrial automation systems engineering \x97 Automation markup language Part 4: Logic | |
| Environmentally conscious design (ECD) - Principles, requirements and guidance | |
| Extended thermal cycling of PV modules \x96 Test procedure | |
| Fibre optics - Multimode launch conditions Part 1: Launch condition requirements for measuring multimode attenuation | |
| Field device integration (FDI) Part 100: Profiles \x97 Generic protocols | |
| Field Device Integration (FDI) Part 101-1: Profiles \x97 Foundation Fieldbus H1 | |
| Field Device Integration (FDI) Part 101-2: Profiles - Foundation Fieldbus HSE | |
| Field Device Integration (FDI) Part 103-1: Profiles - PROFIBUS | |
| Field Device Integration (FDI) Part 103-4: Profiles - PROFINET | |
| Field device integration (FDI) Part 115-2: Profiles \x97 Modbus-RTU | |
| Field device integration (FDI) Part 150-1: Profiles \x97 ISA100 WIRELESS | |
| Field device integration (FDI) Part 1: Overview | |
| Field Device Integration (FDI) Part 2: FDI Client | |
| Field Device Integration (FDI) Part 3: Server | |
| Field Device Integration (FDI) Part 4: FDI Packages | |
| Field Device Integration (FDI) Part 5: Information Model | |
| Field Device Integration (FDI) Part 6: Technology Mapping | |
| Field Device Integration (FDI) Part 7: Communication Devices | |
| Field device integration (FDI)\xae Part 151-1: Profiles - OPC UA | |
| Field device integration (FDI\xae) Part 102-2: Profiles - EtherNet/IP | |
| Field Device Integration (FDI\xae) Part 6-100: Technology Mapping - .Net | |
| Field Device Integration (FDI\xae) Part 6-200: Technology Mapping \x97 HTML5 | |
| Field device integration (FDI\xae) Part 8: EDD to OPC-UA Mapping | |
| Field device tool (FDT) interface specification \x97 Part 302: Communication profile integration \x97 IEC 61784 CPF 2 | |
| Field device tool (FDT) interface specification Part 1: Overview and guidance | |
| Field device tool (FDT) interface specification Part 2: Concepts and detailed description | |
| Field device tool (FDT) interface specification Part 302: Communication profile integration - IEC 61784 CPF 2 | |
| Field device tool (FDT) interface specification Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2 | |
| Field device tool (FDT) interface specification Part 309: Communication profile integration - IEC 61784 CPF 9 | |
| Field device tool (FDT) interface specification Part 71: OPC UA Information Model for FDT | |
| Field devices integration (FDI) Part 109-1: Profiles - HART(r) and WirelessHART(r) | |
| File format for professional transfer and exchange of digital audio data | |
| Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification | |
| Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification - Electric double-layer capacitors for power application | |
| Flow battery energy systems for stationary applications Part 1: Terminology and general aspects | |
| Flow battery energy systems for stationary applications Part 2-1: Performance general requirements and test methods | |
| Flow battery energy systems for stationary applications Part 2-2: Safety requirements | |
| Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment | |
| Framework for energy market communications Part 301: Common information model (CIM) extensions for markets | |
| Framework for energy market communications Part 451-10: Profiles for Energy Consumption Data ("My Energy Data") | |
| Framework for energy market communications Part 451-6: Publication of information on market, contextual and assembly models for European-style markets | |
| Framework for energy market communications Part 451-7: Balancing processes, contextual and assembly models for European style market | |
| Framework for energy market communications Part 451-8: HVDC Scheduling process, contextual and assembly models for European style market | |
| Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile | |
| Fuel cell technologies Part 2-100: Fuel cell modules - Safety | |
| Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety | |
| Fuel cell technologies Part 3-202: Stationary fuel cell power systems \x97 Performance test methods for small fuel cell power systems for multiple units operation | |
| Fuel cell technologies Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety | |
| Fuel cell technologies Part 4-102: Fuel cell power systems for electrically powered industrial trucks \x97 Performance test methods | |
| Fuel cell technologies Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods | |
| Fuel cell technologies Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) \x96 Fuel cell/battery hybrid systems performance test methods for excavators... | |
| Fuel cell technologies Part 5-100: Portable fuel cell power systems \x96 Safety | |
| Fuel cell technologies Part 6-101: Micro fuel cell power systems \x97 Safety \x97 General requirements | |
| Fuel cell technologies Part 6-106: Micro fuel cell power systems \x97 Safety \x97 Indirect Class 8 (corrosive) compounds | |
| Fuel cell technologies Part 6-107: Micro fuel cell power systems - Safety - Indirect water-reactive (Division 4.3) compounds | |
| Fuel cell technologies Part 6-400: Micro fuel cell power systems \x96 Power and data interchangeability | |
| Fuel cell technologies Part 6-401: Micro fuel cell power systems - Power and data interchangeability - Performance test methods for laptop computer | |
| Fuel cell technologies Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells | |
| Fuel cell technologies Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible... | |
| Fuel cell technologies Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes,... | |
| Fuel cell technologies Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems | |
| Fuel cell technologies Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test... | |
| Grid integration of renewable energy generation \x97 Terms and definitions | |
| Guidance on human aspects of dependability | |
| Heat shrinkable low and medium voltage moulded shapes Part 1: General requirements | |
| Heat shrinkable low and medium voltage moulded shapes Part 2: Methods of test | |
| Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications | |
| Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications | |
| Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials \x96 Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications | |
| High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 213: Voltage detecting and indicating system | |
| High-voltage switchgear and controlgear Part 214: Internal arc classification for metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 215: Phase comparator used with VDIS | |
| High-voltage switchgear and controlgear Part 4: Handling procedures for gases for insulation and/or switching | |
| Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria | |
| Hydraulic machines \x97 Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines | |
| In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles | |
| Industrial communication networks - High availability automation networks Part 2: Media Redundancy Protocol (MRP) | |
| Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) | |
| Industrial communication networks - High availability automation networks Part 5: Beacon Redundancy Protocol (BRP) | |
| Industrial communication networks - Network and system security Part 3-3: System security requirements and security levels | |
| Industrial networks - Coexistence of wireless systems Part 3: Formal description of the automated coexistence management and application guidance | |
| Industrial networks - Coexistence of wireless systems Part 4: Coexistence management with central coordination of wireless applications | |
| Industrial networks \x97 Coexistence of wireless systems Part 2: Coexistence management | |
| Industrial-process measurement, control and automation - Digital factory framework Part 2: Model elements | |
| Industrial-process measurement, control and automation \x97 Digital factory framework Part 1: General principles | |
| Industrial-process measurement, control and automation \x97 Digital factory framework Part 3: Application of Digital Factory for life cycle management of production systems | |
| Industrial-process measurement, control and automation \x97 Life-cycle-managemen t for systems and components | |
| Industrial-process measurement, control and automation Part 2: Internet of Things (IoT) - Application framework for industrial facility demand response energy management | |
| Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method | |
| Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones | |
| Junction boxes for photovoltaic modules \x97 Safety requirements and tests | |
| Lightning density based on lightning location systems (LLS) - General principles | |
| Lightning Protection System Components (LPSC) Part 1: Requirements for connection components | |
| Lightning Protection System Components (LPSC) Part 2: Requirements for conductors and earth electrodes | |
| Lightning protection system components (LPSC) Part 3: Requirements for isolating spark gaps (ISGs) | |
| Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners | |
| Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Lightning protection system components (LPSC) Part 6: Requirements for lightning strike counters (LSC) | |
| Lightning Protection System Components (LPSC) Part 7: Requirements for earthing enhancing compounds | |
| Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics | |
| Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods | |
| Low resistance measurements - Methods and guidance | |
| Low-voltage switchgear and controlgear - Product data and properties for information exchange - Engineering data Part 2-3: Functional safety and reliability | |
| Low-voltage switchgear and controlgear enclosed equipment Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 \x97 Isolation of electrical equipment during repair and maintenance work in specific... | |
| Luminaire performance Part 1: General requirements | |
| Luminaire performance Part 2-1: Particular requirements \x97 LED luminaires | |
| Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters | |
| Management of alarms systems for the process industries | |
| Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Bridge alert management Part 1: Operational and performance requirements, methods of testing and required test results | |
| Maritime navigation and radiocommunication equipment and systems \x96 Bridge alert management Part 2: Alert and cluster identifiers and other additional features | |
| Material declaration for products of and for the electrotechnical industry | |
| Measurement of internal electric field in insulating materials \x97 Pressure wave propagation method | |
| Measurement procedures for materials used in photovoltaic modules Part 1-7: Encapsulants \x97 Test procedure of optical durability | |
| Measurement procedures for materials used in photovoltaic modules Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety requirements | |
| Measurement procedures for materials used in photovoltaic modules Part 5-1: Edge seals - Suggested test methods for use with edge seal materials | |
| Measurement procedures for materials used in photovoltaic modules Part 6-2: General tests - Moisture permeation testing of polymeric materials | |
| Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure Part 1: Low-frequency magnetic fields | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 3: Frequency aging test methods | |
| Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 4: Short-term frequency stability test methods | |
| Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets Part 2: Details of air flow, air separation and air cooling requirements | |
| Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 2: Method for the determination of forced air... | |
| Mechanical structures for electrical and electronic equipment \x96 Aisle containment for IT cabinets Part 1: Dimensions and mechanical requirements | |
| Mechanical structures for electrical and electronic equipment \x97 Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 6: Air recirculation and bypass of indoor cabinets... | |
| Medical electrical equipment - Medical image display systems Part 2: Acceptance and constancy tests for medical image displays | |
| Medical electrical equipment - Medical light ion beam equipment - Performance characteristics | |
| Methods for product accelerated testing | |
| Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution | |
| Nuclear power plants - Control rooms - Computer-based procedures | |
| Nuclear power plants - Electrical power systems - Electrical power systems analysis | |
| Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems | |
| Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits Part 2: HDL-programmed integrated circuits for systems performing category B or C functions... | |
| Nuclear power plants \x96 Instrumentation and control systems \x96 Requirements for coordinating safety and cybersecurity | |
| Nuclear power plants \x96 Instrumentation, control and electrical power systems \x96 Cybersecurity requirements | |
| Nuclear power plants \x97 Control rooms \x97 Requirements for emergency response facilities | |
| Obsolescence management | |
| OPC unified architecture Part 10: Programs | |
| OPC unified architecture Part 11: Historical Access | |
| OPC unified architecture Part 12: Discovery and global services | |
| OPC Unified Architecture Part 13: Aggregates | |
| OPC unified architecture Part 14: PubSub | |
| OPC Unified Architecture Part 15: Safety | |
| OPC unified architecture Part 18: Role-Based Security | |
| OPC unified architecture Part 3: Address Space Model | |
| OPC Unified Architecture Part 4: Services | |
| OPC unified architecture Part 5: Information Model | |
| OPC Unified Architecture Part 6: Mappings | |
| OPC unified architecture Part 7: Profiles | |
| OPC unified architecture Part 8: Data Access | |
| OPC unified architecture Part 9: Alarms and conditions | |
| Open systems dependability | |
| Optical circuit boards \x97 Basic test and measurement procedures Part 2-5: Flexibility test for flexible opto-electric circuits | |
| Optical circuit boards Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors | |
| Optical circuit boards Part 4-214: Interface standards \x97 Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety Part 2-1: Particular requirements - semi-integrated OLED modules | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety Part 2-2: Particular requirements - Integrated OLED modules | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety Part 2-3: Particular requirements - Rigid OLED tiles and panels | |
| Organic light emitting diode (OLED) light sources for general lighting - Safety Part 2-4: Particular requirements - Rigid OLED tiles and panels | |
| Organic light emitting diode (OLED) Light sources for general lighting \x96 Safety Part 1: General requirements and tests | |
| Organic light emitting diode (OLED) Light sources for general lighting \x97 Safety Part 1: General requirements and tests | |
| Organic light emitting diode (OLED) light sources for general lighting \x97 Safety Part 2-1: Particular requirements \x97 semi-integrated OLED modules | |
| Particular requirements for load-shedding equipment (LSE) | |
| Photobiological safety of lamps and lamp systems Part 6: Ultraviolet lamp products | |
| Photobiological safety of lamps and lamp systems Part 7: Light sources and luminaires primarily emitting visible radiation | |
| Photovoltaic (PV) modules - Non-uniform snow load testing | |
| Photovoltaic (PV) modules \x97 Transportation testing Part 1: Transportation and shipping of module package units | |
| Photovoltaic (PV) systems \x97 Requirements for testing, documentation and maintenance Part 2: Grid connected systems \x97 Maintenance of PV systems | |
| Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment | |
| Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) Part 1: General requirements | |
| Plugs, socket-outlets and ship couplers for highvoltage shore connection systems (HVSC-systems) Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships | |
| Power line communication systems for power utility applications Part 1: Planning of analogue and digital power line carrier systems operating over HV electricity grids | |
| Power line communication systems for power utility applications Part 3: Digital Power Line Carrier (DPLC) terminals and hybrid ADPLC terminals | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 1: General requirements | |
| Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems Part 2: Modular multilevel converters | |
| Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850 | |
| Power systems management and associated information exchange - Data and communications security Part 3: Communication network and system security - Profiles including TCP/IP | |
| Power systems management and associated information exchange - Data and communications security Part 5: Security for IEC 60870-5 and derivatives | |
| Power systems management and associated information exchange - Data and communications security Part 8: Role-based access control for power system management | |
| Power systems management and associated information exchange - Data and communications security Part 9: Cyber security key management for power system equipment | |
| Power systems management and associated information exchange \x96 Data and communications security Part 4: Profiles including MMS and derivatives | |
| Power systems management and associated information exchange \x97 Data and communications security Part 4: Profiles including MMS and derivatives | |
| Process management for avionics \x97 Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components | |
| Process management for avionics \x97 Counterfeit prevention Part 2: Managing electronic components from non-franchised sources | |
| Protection against lightning \x97 Thunderstorm warning systems | |
| Protection against lightning Part 1: General principles | |
| Protection against lightning Part 2: Risk management | |
| Protection against lightning Part 3: Physical damage to structures and life hazard | |
| Protection against lightning Part 4: Electrical and electronic systems within structures | |
| Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation | |
| Radiation protection instrumentation - Spectroscopy-based alarming personal radiation detectors (SPRD) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation \x97 Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation \x97 Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation | |
| Radiation protection instrumentation \x97 Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material | |
| Railway applications - Electronic power converters for fixed installations Part 1: General requirements | |
| Railway applications - Rolling stock - Electrical connectors - Requirements and test methods | |
| Railway applications - Urban guided transport management and command/control systems Part 1: System principles and fundamental concepts | |
| Railway applications - Urban guided transport management and command/control systems Part 2: Functional requirements specification | |
| Railway applications - Urban guided transport management and command/control systems Part 3: System requirements specification | |
| Railway applications \x96 Rolling stock - Onboard lithium-ion traction batteries | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 1: General procedures for all types of transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 2: Specific procedures for pressure transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 3: Specific procedures for temperature transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 4: Specific procedures for level transmitters | |
| Reference conditions and procedures for testing industrial and process measurement transmitters Part 5: Specific procedures for flow transmitters | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Safety requirements for power electronic converter systems and equipment Part 1: General | |
| Safety requirements for power electronic converter systems and equipment Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or... | |
| Safety requirements for secondary batteries and battery installations Part 1: General safety information | |
| Safety requirements for secondary batteries and battery installations Part 2: Stationary batteries | |
| Safety requirements for secondary batteries and battery installations Part 4: Valve-regulated lead-acid batteries for use in portable appliances | |
| Safety requirements for secondary batteries and battery installations Part 5: Safe operation of stationary lithium ion batteries | |
| Safety requirements for secondary batteries and battery installations Part 6: Safe operation of lithium-ion batteries in traction applications | |
| Sample preparation for measurement of mercury level in fluorescent lamps | |
| Secondary cells and batteries - Marking symbols for identification of their chemistry | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes \x97 Safety requirements for secondary lithium cells and batteries, for use in industrial applications | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing | |
| Secondary lithium-ion cells for the propulsion of electric road vehicles Part 3: Safety requirements | |
| Security for industrial automation and control systems Part 2-1: Security program requirements for IACS asset owners | |
| Security for industrial automation and control systems Part 2-4: Security program requirements for IACS service providers | |
| Security for industrial automation and control systems Part 3-2: Security risk assessment for system design | |
| Security for industrial automation and control systems Part 4-1: Secure product development lifecycle requirements | |
| Security for industrial automation and control systems Part 4-2: Technical security requirements for IACS components | |
| Semiconductor devices - Flexible and stretchable semiconductor devices Part 9: Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells | |
| Semiconductor devices - Semiconductor interface for automotive vehicles Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors | |
| Semiconductor devices - Semiconductor interface for automotive vehicles Part 3: Shock driven piezoelectric energy harvesting for automotive vehicle sensors | |
| Semiconductor devices \x96 Semiconductor interface for automotive vehicles Part 1: General requirements of power interface for automotive vehicle sensors | |
| Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods | |
| Solar thermal electric plants Part 3-2: Systems and components \x96 General requirements and test methods for large-size parabolic-trough collectors | |
| Solid-state relays - Safety requirements | |
| Standardized product ontology register and transfer by data parcels Part 8: Web service interface for data parcels | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification | |
| Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 2: Guidelines for the use | |
| Surface cleaning appliances Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance | |
| Surface cleaning appliances Part 5: High pressure cleaners and steam cleaners for household and commercial use \x96 Methods for measuring performance | |
| Surface cleaning appliances Part 8: Dry vacuum cleaners for commercial use \x96 Methods for measuring the performance | |
| Surface cleaning appliances Part 9: Floor treatment machines with or without traction drive, for commercial use \x97 Methods for measuring the performance | |
| Systems interface between customer energy management system and the power management system Part 10-3: Open automated demand response \x96 Adapting smart grid user interfaces to the IEC common information model... | |
| Systems interface between customer energy management system and the power management system Part 4: Demand Side Resource Interface | |
| Terrestrial photovoltaic (PV) modules \x97 Quality system for PV module manufacturing | |
| Text-to-speech for television - General requirements | |
| Tracked Changed (Redline) - Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) | |
| Tracked Changes (Redline) - Audio/video, information and communication technology equipment - Part 1: Safety requirements | |
| Tracked Changes (Redline) - Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT) | |
| Tracked Changes (Redline) - Bi-directional grid-connected power converters - Part 1: General and safety requirements | |
| Tracked Changes (Redline) - Calibration of tuneable laser sources | |
| Tracked Changes (Redline) - Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods... | |
| Tracked Changes (Redline) - Control systems in the process industry - Electrical and instrumentation loop check | |
| Tracked Changes (Redline) - Dependability of new products containing reused parts and life-extended products | |
| Tracked Changes (Redline) - Desktop and notebook computers - Measurement of energy consumption | |
| Tracked Changes (Redline) - Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation | |
| Tracked Changes (Redline) - Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method... | |
| Tracked Changes (Redline) - Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity | |
| Tracked Changes (Redline) - Digital addressable lighting interface - Part 103: General requirements - Control devices | |
| Tracked Changes (Redline) - Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware transfer | |
| Tracked Changes (Redline) - Digital addressable lighting interface \x97 Part 101: General requirements \x97 System components | |
| Tracked Changes (Redline) - Digital addressable lighting interface Part 207: Particular requirements for control gear - LED modules (device type 6) | |
| Tracked Changes (Redline) - Dynamic modules - Generic specification | |
| Tracked Changes (Redline) - Dynamic modules Part 1: Performance standards - General conditions | |
| Tracked Changes (Redline) - Electric vehicle battery swap system \x97 Part 1: General and guidance | |
| Tracked Changes (Redline) - Electric vehicle battery swap system Part 2: Safety requirements | |
| Tracked Changes (Redline) - Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Part 1: Product family standard | |
| Tracked Changes (Redline) - Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) Part 3: Resistance welding equipment | |
| Tracked Changes (Redline) - Electrical energy storage (EES) systems - Part 1: Vocabulary | |
| Tracked Changes (Redline) - Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte | |
| Tracked Changes (Redline) - Energy performance of lamp controlgear \x97 Part 2: Controlgear for discharge lamps (excluding lowpressure mercury fluorescent lamps) \x97 Method of measurement to determine the efficiency of... | |
| Tracked Changes (Redline) - Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the... | |
| Tracked Changes (Redline) - Energy performance of lamp controlgear Part 3: Controlgear for tungsten-halogen lamps and LED light sources \x96 Method of measurement to determine the efficiency of controlgear | |
| Tracked Changes (Redline) - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2: Semantics libraries | |
| Tracked Changes (Redline) - Field Device Integration (FDI)\xae - Part 101-2: Profiles - Foundation Fieldbus HSE | |
| Tracked Changes (Redline) - Field Device Integration (FDI)\xae - Part 103-1: Profiles - PROFIBUS | |
| Tracked Changes (Redline) - Field Device Integration (FDI)\xae - Part 103-4: PROFINET | |
| Tracked Changes (Redline) - Field device integration (FDI)\xae - Part 109-1: Profiles. HART\xae and WirelessHART\xae | |
| Tracked Changes (Redline) - Field device integration (FDI)\xae - Part 150-1: Profiles - ISA100 | |
| Tracked Changes (Redline) - Field device Integration (FDI)\xae \x97 Part 101-1: Profiles \x97 Foundation Fieldbus H1 | |
| Tracked Changes (Redline) - Field device integration (FDI\xae) - Part 100: Profiles - Generic protocols | |
| Tracked Changes (Redline) - Field Device Integration (FDI\xae) - Part 1: Overview | |
| Tracked Changes (Redline) - Field Device Integration (FDI\xae) - Part 2: Client | |
| Tracked Changes (Redline) - Field Device Integration (FDI\xae) - Part 3: Server | |
| Tracked Changes (Redline) - Field Device Integration (FDI\xae) - Part 4: FDI Packages | |
| Tracked Changes (Redline) - Field device integration (FDI\xae) - Part 5: FDI Information Model | |
| Tracked Changes (Redline) - Field Device Integration (FDI\xae) - Part 6: FDI Technology Mappings | |
| Tracked Changes (Redline) - Field Device Integration (FDI\xae) \x97 Part 7: Communication Devices | |
| Tracked Changes (Redline) - Field device tool (FDT) interface specification - Part 1: Overview and guidance | |
| Tracked Changes (Redline) - Field device tool (FDT) interface specification - Part 2: Concepts and detailed description | |
| Tracked Changes (Redline) - Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification | |
| Tracked Changes (Redline) - Fixed electric double-layer capacitors for use in electronic equipment \x97 Part 2: Sectional specification \x97 Electric double-layer capacitors for power application | |
| Tracked Changes (Redline) - Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment | |
| Tracked Changes (Redline) - Framework for energy market communications Part 301: Common information model (CIM) extensions for markets | |
| Tracked Changes (Redline) - Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety | |
| Tracked Changes (Redline) - Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods | |
| Tracked Changes (Redline) - Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems | |
| Tracked Changes (Redline) - Fuel cell technologies \x97 Part 7-2: Test methods \x97 Single cell and stack performance tests for solid oxide fuel cells | |
| Tracked Changes (Redline) - Fuel cell technologies Part 3-100: Stationary fuel cell power systems \x97 Safety | |
| Tracked Changes (Redline) - Fuel cell technologies Part 5-100: Portable fuel cell power systems \x96 Safety | |
| Tracked Changes (Redline) - Guidance on human aspects of dependability | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear - Part 214: Internal arc classification for AC metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to... | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear \x97 Part 4: Handling procedures for gases for insulation and/or switching | |
| Tracked Changes (Redline) - High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV \x96 Fluid-filled and extruded insulation cables \x96 Fluid-filled... | |
| Tracked Changes (Redline) - Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in kaplan, francis, and pelton turbines | |
| Tracked Changes (Redline) - Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) | |
| Tracked Changes (Redline) - Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) | |
| Tracked Changes (Redline) - Industrial networks - Coexistence of wireless systems - Part 2: Coexistence management | |
| Tracked Changes (Redline) - Industrial networks - Coexistence of wireless systems - Part 4: Coexistence management with central coordination of wireless applications | |
| Tracked Changes (Redline) - Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) - Part 1: Requirements for connection components | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISGs) | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSCs) | |
| Tracked Changes (Redline) - Lightning protection system components (LPSC) Part 7: Requirements for earthing enhancing compounds | |
| Tracked Changes (Redline) - Lithium-ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics | |
| Tracked Changes (Redline) - Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 \x97 Isolation of electrical equipment during repair... | |
| Tracked Changes (Redline) - Luminaire performance - Part 1: General requirements | |
| Tracked Changes (Redline) - Luminaire performance - Part 2-1: Particular requirements - LED luminaires | |
| Tracked Changes (Redline) - Magnetic resonance equipment for medical imaging Part 1: Determination of essential image quality parameters | |
| Tracked Changes (Redline) - Management of alarm systems for the process industries | |
| Tracked Changes (Redline) - Maritime navigation and radiocommunication equipment and systems \x97 Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results... | |
| Tracked Changes (Redline) - Measurement of internal electric field in insulating materials - Pressure wave propagation method | |
| Tracked Changes (Redline) - Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure - Part 1: Low-frequency magnetic... | |
| Tracked Changes (Redline) - Methods for product accelerated testing | |
| Tracked Changes (Redline) - Obsolescence management | |
| Tracked Changes (Redline) - Organic light emitting diode (OLED) Light sources for general lighting \x97 Safety \x97 Part 1: General requirements and tests | |
| Tracked Changes (Redline) - Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units | |
| Tracked Changes (Redline) - Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line carrier systems operating over HV electricity grids | |
| Tracked Changes (Redline) - Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP | |
| Tracked Changes (Redline) - Power systems management and associated information exchange - Data and communications security - Part 5: Security for IEC 60870-5 and derivatives | |
| Tracked Changes (Redline) - Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment | |
| Tracked Changes (Redline) - Protection against lightning Part 1: General principles | |
| Tracked Changes (Redline) - Protection against lightning Part 2: Risk management | |
| Tracked Changes (Redline) - Protection against lightning Part 3: Physical damage to structures and life hazard | |
| Tracked Changes (Redline) - Protection against lightning Part 4: Electrical and electronic systems within structures | |
| Tracked Changes (Redline) - Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material | |
| Tracked Changes (Redline) - Radiation protection instrumentation - Spectroscopy-based alarming personal radiation detectors (SPRD) for the detection of illicit trafficking of radioactive material | |
| Tracked Changes (Redline) - Radiation protection instrumentation \x97 Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation | |
| Tracked Changes (Redline) - Radiation protection instrumentation \x97 Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material | |
| Tracked Changes (Redline) - Railway applications - Rolling stock - Electrical connectors - Requirements and test methods | |
| Tracked Changes (Redline) - Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification | |
| Tracked Changes (Redline) - Railway applications \x97 Urban guided transport management and command/control systems \x97 Part 1: System principles and fundamental concepts | |
| Tracked Changes (Redline) - Safety of primary and secondary lithium cells and batteries during transport | |
| Tracked Changes (Redline) - Safety requirements for secondary batteries and battery installations Part 1: General safety information | |
| Tracked Changes (Redline) - Safety requirements for secondary batteries and battery installations Part 2: Stationary batteries | |
| Tracked Changes (Redline) - Safety requirements for secondary batteries and battery installations Part 4: Valve-regulated lead-acid batteries for use in portable appliances | |
| Tracked Changes (Redline) - Secondary cells and batteries - Marking symbols for identification of their chemistry | |
| Tracked Changes (Redline) - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications | |
| Tracked Changes (Redline) - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements | |
| Tracked Changes (Redline) - Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing | |
| Tracked Changes (Redline) - Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing | |
| Tracked Changes (Redline) - Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers | |
| Tracked Changes (Redline) - Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods | |
| Tracked Changes (Redline) - Solid-state relays - Safety requirements | |
| Tracked Changes (Redline) - Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality \x97 Part 2: Guidelines for the use | |
| Tracked Changes (Redline) - Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification | |
| Tracked Changes (Redline) - Universal serial bus interfaces for data and power Part 1-3: Common components \x96 USB Type-CTM Cable and Connector Specification | |
| Tracked Changes (Redline) - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing | |
| Universal Serial Bus interfaces for data and power Part 1-2: Common components - USB Power Delivery Specification | |
| Universal serial bus interfaces for data and power Part 1-3: Common components - USB Type-C\x99 Cable and Connector Specification | |
| Universal Serial Bus interfaces for data and power Part 1-4: Common components - USB Type-CTM Authentication Specification | |
| Universal serial bus interfaces for data and power Part 1-5: Common components \x97 USB Audio 3.0 device class definition | |
| Universal serial bus interfaces for data and power Part 1-6: Common components \x97 USB Audio 3.0 device class definition basic functions | |
| Universal serial bus interfaces for data and power Part 1-7: Common components \x97 USB Audio 3.0 device class definition data formats | |
| Universal serial bus interfaces for data and power Part 1-8: Common components \x97 USB Audio 3.0 device class definition terminal types | |
| Universal Serial Bus interfaces for data and power Part 4-1: Universal Serial Bus 4 \x99 Specification | |
| Use case methodology Part 3: Definition of use case template artefacts into an XML serialized format | |
| Video Surveillance Systems (VSS) for use in security applications Part 2-11: Video transmission protocols - Interop profiles for VMS and cloud VSaaS systems for safe cities and law enforcement | |
| Video surveillance systems for use in security applications Part 2-31: Live streaming and control based on web services | |
| Video surveillance systems for use in security applications Part 2-32: Recording control and replay based on web services | |
| Video surveillance systems for use in security applications Part 2-33: Video transmission protocols \x97 Cloud uplink and remote management system access | |
| Video surveillance systems for use in security applications Part 5-1: Data specifications and image quality performance for camera devices - Environmental test methods for image quality performance | |
| Video surveillance systems for use in security applications Part 5: Data specifications and image quality performance for camera devices | |
| Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing |
| << Prev | Next >> |