Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
280
290
300
310
320
330
332
333
334
335
336
337
338
339
340
341
342
343
344
350
360
370
380
390
400
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Measurement 4f Sound Insulation in Buildings and of Building Elements Part 2: Determination, Verification and and Application of Precision Data | |
| Acoustics - Measurement of sound insulation in buildings and of building elements - Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above... | |
| Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements Part 10: Laboratory Measurement of Airborne Sound Insulation of Small Building Elements | |
| Adhesives - Test Method for Adhesives for Plastic or Rubber Floor Coverings or Wall Coverings - Determination of Dimensional Changes After Accelerated Ageing adhesives | |
| Adhesives - Test Methods for Adhesives for Floor Coverings and Wall Coverings - Shear Test | |
| Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - 180 Degrees - "T" Peel Test for a Flexible-to-Flexible Assembly | |
| Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Tensile Strength and Elongation | |
| Adjustable Beds for Disabled Persons - Requirements and Test Methods | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties | |
| Advanced technical ceramics Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of tensile properties | |
| Advanced technical ceramics Mechanical properties of ceramic composites at high temperature under inert atmosphere Determination of shear strength by compression loading of notched specimens | |
| Aerospace series - Metallic materials - Test methods Part 21: Radiographic testing of castings | |
| Aerospace series - Steels - Test methods Part 2: Izod impact test | |
| Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination | |
| Aerospace series - Test methods for aluminium and aluminium alloy products Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought... | |
| Aerospace series - Test methods for metallic materials Part 005: Uninterrupted creep and stress-rupture testing | |
| Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content | |
| Aerospace series \x97 Metallic materials \x97 Test methods Part 16: Non-destructive testing \x97 Penetrant testing | |
| Aircraft Ground Support Equipment - General Requirements - Part 1: Basic Safety Requirements | |
| Aircraft Ground Support Equipment - General Requirements - Part 2: Stability and Strength Requirements, Calculations and Test Methods | |
| Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction | |
| Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction | |
| Aircraft ground support equipment General requirements Part 3: Vibration measurement methods and reduction | |
| Aircraft ground support equipment General requirements Part 4: Noise measurement methods and reduction | |
| Atomizing and Spraying Equipment for Coating Materials - Safety Requirements | |
| Basket Trolleys - Part 1: Requirements and Tests for Basket Trolleys with or without a Child Carrying Facility | |
| Basket trolleys Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors | |
| Basket trolleys Part 3: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility | |
| Basket trolleys Part 4: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors | |
| Basket trolleys Part 7: Requirements and tests for basket trolleys with baby and child carrying facilities | |
| Bearings - Airframe Rolling Double Row Self Aligning Ball Bearings in Corrosion Resisting Steel Diameter Series 2. Dimensions and Loads | |
| Bearings - Airframe Rolling Double Row, Self Aligning Ball Bearings in Steel Diameter Series 2. Dimensions and Loads | |
| Bearings - Airframe Rolling Rigid Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 0 and 2. Dimensions and Loads | |
| Bearings - Airframe Rolling Rigid Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 8 and 9. Dimensions and Loads | |
| Bearings - Airframe Rolling Rigid, Single Row Ball Bearings in Steel Diameter Series 0 and 2. Dimensions and Loads | |
| Bearings - Airframe Rolling Rigid, Single Row Ball Bearings in Steel Diameter Series 8 and 9 Dimensions and Loads | |
| Bearings - Airframe Rolling Single Row Self Aligning Roller Bearings in Corrosion Resisting Steel Diameter Series 3 and 4. Dimensions and Loads | |
| Bearings - Airframe Rolling Single Row, Self Aligning Roller Bearings in Steel Diameter Series 3 and 4. Dimensions and Loads | |
| Bearings - Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner. Normal Series. Dimensions and Loads | |
| Bearings, Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner. Light Series. Dimensions and Loads | |
| Building Hardware - Lever Handles and Knob Furniture - Requirements and Test Methods | |
| Building Hardware - Single-Axis Hinges - Requirements and Test Mehtods | |
| Cement - Part 1: Composition, Specifications and Conformity Criteria for Common Cements | |
| Cement - Part 2: Conformity Evaluation | |
| Cement Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements | |
| Cement Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI | |
| Cement Part 6: Cement with recycled building materials | |
| Child care articles - Safety barriers - Safety requirements and test methods | |
| Child care articles - Wheeled child conveyances Part 3: Pushchairs intended for leisure sport activities | |
| Child care articles \x96 Wheeled child conveyances Part 2: Pushchairs for children above 15 kg up to 22 kg | |
| Child care articles Wheeled child conveyances Safety requirements and test methods | |
| Child use and care articles - Wheeled child conveyances Part 1: Pushchairs and prams | |
| Classification of Fires | |
| Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced | |
| Concrete pipes and fittings, unreinforced, steel fibre and reinforced | |
| Conveyor Belts - Electrical Conductivity - Specification and Method of Test | |
| Copper and copper Alloys - Cast Unwrought Copper Products | |
| Copper and Copper Alloys - Copper Cathodes | |
| Copper and Copper Alloys - Copper Drawing Stock (Wire Rod) | |
| Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes Part 1: Test with an encircling test coil on the outer... | |
| Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes Part 2: Test with an internal probe on the inner surface... | |
| Copper and Copper Alloys - Eddy Current Test for Tubes | |
| Copper and Copper Alloys - Ingots and Castings | |
| Copper and Copper Alloys - Master Alloys | |
| Diving accessories - Snorkels - Safety requirements and test methods | |
| Domestic Furniture - Beds and Mattresses - Test Methods for the Determination of Functional Characteristics | |
| Electrically Propelled Road Vehicles - Measurement of Energy Performances - Part 2: Thermal Electric Hybrid Vehicles | |
| Electrically Propelled Road Vehicles - Measurement of Energy Performances Part 1: Pure Electric Vehicles | |
| Electrically Propelled Road Vehicles - Specific Requirements for Safety - Part 3: Protection of Users Against Electrical Hazards | |
| Electrically Propelled Road Vehicles - Specific Requirements for Safety Part 1: On Board Energy Storage | |
| Electrically Propelled Road Vehicles - Specific Requirements for Safety Part 2: Functional Safety Means and Protection Against Failures | |
| Eurocode - Basis of structural design | |
| Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads | |
| Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions | |
| Eurocode 1 - Actions on structures Part 1-9: Atmospheric icing | |
| Eurocode 1 Actions on structures Part 1-6: General actions Actions during execution | |
| Eurocode 1 Actions on structures Part 1-7: General actions Accidental actions | |
| Eurocode 1 Actions on structures Part 3: Actions induced by cranes and machinery | |
| Eurocode 1 Actions on structures Part 4: Silos and tanks | |
| Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions | |
| Eurocode 1: Actions on Structures Part 1-1: General Actions Densities, Self-Weight, Imposed Loads for Buildings | |
| Eurocode 1: Actions on structures Part 1-2: General actions Actions on structures exposed to fire | |
| Eurocode 1: Actions on structures Part 1-4: General actions Wind actions | |
| Eurocode 1: Actions on structures Part 1-5: General actions Thermal actions | |
| Eurocode 1: Actions on structures Part 2: Traffic loads on bridges | |
| Eurocode 2 - Design of concrete structures Part 4: Design of fastenings for use in concrete | |
| Eurocode 2 Design of concrete structures Part 2: Concrete bridges Design and detailing rules | |
| Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures | |
| Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings | |
| Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings | |
| Eurocode 2: Design of concrete structures Part 1-2: General rules - Structural fire design | |
| Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire design | |
| Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700 | |
| Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels | |
| Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures | |
| Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading | |
| Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts | |
| Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys | |
| Eurocode 3 - Design of steel structures - Part 4-1: Silos | |
| Eurocode 3 - Design of steel structures - Part 4-2: Tanks | |
| Eurocode 3 - Design of steel structures - Part 4-3: Pipelines | |
| Eurocode 3 - Design of steel structures - Part 5: Piling | |
| Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures | |
| Eurocode 3 - Design of steel structures Part 1-13: Beams with large web openings | |
| Eurocode 3 - Design of steel structures Part 1-14: Design assisted by finite element analysis | |
| Eurocode 3 - Design of steel structures Part 1-5: Plated structural elements | |
| Eurocode 3 \x97 Design of steel structures Part 1-4: General rules \x97 Supplementary rules for stainless steels | |
| Eurocode 3 Design of steel structures Part 1-11: Design of structures with tension components | |
| Eurocode 3 Design of steel structures Part 1-3: General rules Supplementary rules for cold-formed members and sheeting | |
| Eurocode 3 Design of steel structures Part 1-4: General rules Supplementary rules for stainless steels | |
| Eurocode 3 Design of steel structures Part 1-5: Plated structural elements | |
| Eurocode 3 Design of steel structures Part 2: Steel bridges | |
| Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties | |
| Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings | |
| Eurocode 3: Design of steel structures - Part 1-9: Fatigue | |
| Eurocode 3: Design of steel structures Part 1-1: General rules and rules for buildings | |
| Eurocode 3: Design of steel structures Part 1-2: General rules Structural fire design | |
| Eurocode 3: Design of steel structures Part 1-8: Design of joints | |
| Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design | |
| Eurocode 4 Design of composite steel and concrete structures Part 1-2: General rules Structural fire design | |
| Eurocode 4 Design of composite steel and concrete structures Part 2: General rules and rules for bridges | |
| Eurocode 4: Design of composite steel and concrete structures Part 1-1: General rules and rules for buildings | |
| Eurocode 5 \x97 Design of timber structures Part 3: Execution | |
| Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings | |
| Eurocode 5: Design of timber structures Part 1-1: General Common rules and rules for buildings | |
| Eurocode 5: Design of timber structures Part 1-2: General Structural fire design | |
| Eurocode 5: Design of timber structures Part 2: Bridges | |
| Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures | |
| Eurocode 6 Design of masonry structures Part 1-1: General rules for reinforced and unreinforced masonry structures | |
| Eurocode 6 Design of masonry structures Part 2: Design considerations, selection of materials and execution of masonry | |
| Eurocode 6 Design of masonry structures Part 3: Simplified calculation methods for unreinforced masonry structures | |
| Eurocode 6: Design of masonry structures Part 1-2: General rules Structural fire design | |
| Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing | |
| Eurocode 7 - Geotechnical design Part 3: Geotechnical structures | |
| Eurocode 7: Geotechnical design - Part 1: General rules | |
| Eurocode 7: Geotechnical design Part 1: General rules | |
| Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges | |
| Eurocode 8 - Design of structures for earthquake resistance Part 1-1: General rules and seismic action | |
| Eurocode 8 Design of structures for earthquake resistance Part 2: Bridges | |
| Eurocode 8 Design of structures for earthquake resistance Part 3: Assessment and retrofitting of buildings | |
| Eurocode 8 Design of structures for earthquake resistance Part 6: Towers, masts and chimneys | |
| Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings | |
| Eurocode 8: Design of structures for earthquake resistance Part 1: General rules, seismic actions and rules for buildings | |
| Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines | |
| Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects | |
| Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design | |
| Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting | |
| Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures | |
| Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules | |
| Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue | |
| Eurocode 9: Design of aluminium structures \x97 Part 1-1: General structural rules | |
| Eurocode Basis of Structural Design | |
| Eurocode. Basis of structural design. Compilation of BS EN 1990:2002 and the National Annex | |
| European Character Repertoires and Their Coding - 8-Bit Single-Byte Coding | |
| Exterior Blinds - Resistance to Load Due to Water Accumulation - Test Method | |
| External Blinds and Shutters - Resistance to Wind Loads - Method of Testing | |
| Family Specification - Single-Mode Optical Fibre Cables to Be Used as Underwater Cables for Lakes and River Crossings, Etc. | |
| Family Specification: AC MOS Digital Integrated Circuits | |
| Family Specification: Digital Integrated HC MOS Circuits Series HC/HCT/HCU | |
| Family Specification: Optical Telecommunication Cables to be Used in Ducts or Direct Buried Application | |
| Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Designations of Dimensions | |
| Fasteners - Clearance Holes for Bolts and Screws | |
| Feather and Down - Sampling in View of Tests | |
| Feather and down - Terms and definitions | |
| Feather and Down - Test Methods - Determination of Microbiological State | |
| Feather and Down - Test Methods - Determination of the Commercial Mass of a Lot of Feather and Down | |
| Feather and down Terms and definitions | |
| Fire-Fighting Hoses Semi-Rigid Delivery Hoses and Hose Assemblies for Pumps and Vehicles | |
| Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Water Vapour Transmission Properties | |
| Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Watertightness | |
| Food Processing Machinery - Slicing Machines - Safety and Hygiene Requirements | |
| Foodstuffs - Determination of Sulfite - Part 1: Optimized Monier-Williams Method | |
| Foodstuffs - Determination of Sulfite - Part 2: Enzymatic Method | |
| Gas Supply Systems - Underground Gas Storage - Part 1: Functional Recommendations for Storage in Aquifers | |
| Gas Supply Systems - Underground Gas Storage - Part 2: Functional Recommendations for Storage in Oil and Gas Fields | |
| Gas Supply Systems - Underground Gas Storage - Part 3: Functional Recommendations for Storage in Solution-Mined Salt Cavities | |
| Gas Supply Systems - Underground Gas Storage - Part 4: Functional Recommendations for Storage in Rock Caverns | |
| Gas Supply Systems - Underground Gas Storage - Part 5: Functional Recommendations for Surface Facilities | |
| Generic Specification for Optical Fibres | |
| Generic Specification: Electromechanical Switches | |
| Geotextiles and Geotextile-Related Products - Determination of the Compressive Creep Properties | |
| Harmonized system of quality assessment for electronic components \x97 Family specification \x97 Optical fibre cables for indoor applications | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Rotary Switches - Assessment Level Y | |
| Harmonized System of Quality Assessment for Electronic Components Family Specification: A1a Graded Index Multimode Optical Fibres | |
| Harmonized System of Quality Assessment for Electronic Components Family Specification: A1b Graded Index Multimode Optical Fibres | |
| Harmonized System of Quality Assessment for Electronic Components Family Specification: Single-Mode Dispersion Shifted (B2) Optical Fibre | |
| Harmonized System of Quality Assessment for Electronic Components Family Specification: Single-Mode Dispersion Unshifted (B1.1) Optical Fibre | |
| Harmonized System of Quality Assessment for Electronic Components Family Specifications: Optical Aerial Telecommunication Cables | |
| Harmonized System of Quality Assessment for Electronic Components Generic Specification: Monolithic Integrated Circuits | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification Optical Fibres A1 Category Graded Index Multimode | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Membrane Switches Including Blank Detail Specification EN 196501 | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Single-Mode (SM) Optical Fibre | |
| Harmonized system of quality assessment for electronic components: Sectional specification: Digital monolithic integrated circuits | |
| Harmonized Systems of Quality Assessment for Electronic Components - Blank Detail Specification: Push Button Switches - Assessment Level Y | |
| Harmonized Systems of Quality Assessment for Electronic Components - Sectional Specification - Optical Cables to be Used Along Electrical Power Lines (OCEPL) | |
| Industrial Valves - Steel Gate Valves | |
| Industrial valves Steel ball valves | |
| Information Technology - Character Repertoire and Coding for Interworking with Telex Services | |
| Inland navigation vessels. Ship's boats | |
| ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fits | |
| ISO System of Limits and Fits- Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts | |
| Light gauge metal containers - Definitions and determination methods for dimensions and capacities - Part 2: General use containers | |
| Light Gauge Metal Containers. Definitions and Determination Methods for Dimensions and Capacities Part 3: Aerosol Cans | |
| Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 1: Open-top cans | |
| Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives | |
| Machines for underground mines Mobile machines working underground Safety Part 1: Rubber tyred vehicles | |
| Machines for underground mines Mobile machines working underground Safety Part 2: Rail locomotives | |
| Marking of General Purpose Industrial Valves | |
| Materials and Articles in Contact with Foodstuffs - Non-Metallic Tableware - Terminology | |
| Metallic materials Test methods Part 1: Tensile testing at ambient temperature | |
| Metallic materials Test methods Part 2: Tensile testing at elevated temperature | |
| Methods of testing cement - Part 3: Determination of setting times and soundness | |
| Methods of testing cement Part 10: Determination of the water-soluble chromium (VI) content of cement | |
| Methods of testing cement Part 11: Heat of hydration - Isothermal Conduction Calorimetry method | |
| Methods of testing cement Part 12: Reactivity of cement constituents \x97 Heat of hydration and bound water content methods | |
| Methods of Testing Cement Part 1: Determination of Strength | |
| Methods of Testing Cement Part 21: Determination of the Chloride, Carbon Dioxide and Alkali Content of Cement | |
| Methods of testing cement Part 2: Chemical analysis of cement | |
| Methods of Testing Cement Part 3: Determination of Setting Time and Soundness | |
| Methods of Testing Cement Part 5: Pozzolanicity Test for Pozzolanic Cements | |
| Methods of Testing Cement Part 6: Determination of Fineness | |
| Methods of Testing Cement Part 7: Methods of Taking and Preparing Samples of Cement | |
| Methods of testing cement Part 8: Heat of hydration Solution method | |
| Methods of testing cement Part 9: Heat of hydration Semi-adiabatic method | |
| National Annex (informative) to Eurocode 3 - Design of steel structures - Part 1-10: Material toughness and through thickness properties | |
| National Annex to Eurocode 1: Actions on structures - Part 1-7: Accidental actions | |
| National Annex to Eurocode 1: Actions on structures \x96 Part 1-7: Accidental actions | |
| Natural Stone Test Methods - Determination of Real Density and Apparent Density, and of Total and Open Porosity | |
| Natural Stone Test Methods - Determination of Water Absorption Coefficient by Capillarity | |
| Natural stone test methods. Determination of compressive strength | |
| Paper and board. Determination of moisture content. Oven-drying method | |
| Paper, Board and Pulps - Standard Atmosphere for Conditioning and Testing and Procedure for Monitoring the Atmosphere and Conditioning of Samples | |
| Personal Eye Protection - Goggles for Motorcycle and Moped Users | |
| Personal Protective Equipment for the Prevention of Falls from a Height - Low Stretch Kernmantel Ropes | |
| Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam | |
| Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes, Fittings and Material - Method for Assessment of the PVC Content Based on Total Chlorine Content | |
| Precious Metals - The Finenesses of Solders Used with Precious Metal Jewellery Alloys | |
| Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods | |
| Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods | |
| Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reactive Functions Related to Epoxy Resins - Part 2: Determination of Amine Functions Using the... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method | |
| Qualitative classification of softwood round timber - Part 1: Spruces and firs | |
| Qualitative classification of softwood round timber - Part 2: Pines | |
| Qualitative classification of softwood round timber - Part 3: Larches and Douglas fir | |
| Quality Assurance - EN Aerospace Products - Approval of the Quality System of Manufacturers | |
| Road Marking Materials - Physical Properties | |
| Rubber and Plastics Machines - Injection Moulding Machines - Safety Requirements | |
| Rubber- or Plastics-Coated Fabrics - Determination of Tear Strength Part 3: Trapezoidal Method | |
| Rubber- or Plastics-Coated Fabrics - Low Temperature Tests Part 1: Bending Test | |
| Rubber- or Plastics-Coated Fabrics - Low Temperature Tests Part 2: Impact Test on Loop | |
| Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting | |
| Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 3: Down Cutting Cross-Cut Saws and Dual Purpose Down Cutting Cross-Cut Saws/Circular Saw Benches | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 4: Multiblade Rip Sawing Machines with Manual Loading and/or Unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 5: Circular Sawbenches/Up-Cuttin g Cross-Cut Sawing Machines | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 6: Circular Sawing Machines for Firewood and Dual Purpose Circular Sawing Machines for Firewood/Circular Saw Benches with Manual Loading and/or... | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 7: Single Blade Log Sawing Machines with Integrated Feed Table and Manual Loading and/or Unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 9: Double Blade Circular Sawing Machines for Cross-Cutting with Integrated Feed and with Manual Loading and/or Unloading | |
| Safety of woodworking machines - Circular sawing machines Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines Part 18: Dimension saws | |
| Safety of woodworking machines - Circular sawing machines Part 19: Circular saw benches (with and without sliding table) and building site saws | |
| Safety of woodworking machines Circular sawing machines Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | |
| Safety of woodworking machines Circular sawing machines Part 16: Double mitre sawing machines for V-cutting | |
| Safety of woodworking machines Circular sawing machines Part 2: Horizontal beam panel saws and vertical panel saws | |
| Safety requirements for cableway installations designed to carry persons - Terminology | |
| Safety requirements for cableway installations designed to carry persons Recovery and evacuation | |
| Safety requirements for cableway installations designed to carry persons Tensioning devices | |
| Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods | |
| Sanitary Tapware: General Technical Specifications for Single Taps and Mixer Taps (Nominal Size 1/2) PN 10: Minimum Flow Pressure of 0.05 MPa (0.5 Bar) | |
| Self Adhesive Tapes - Measurement of Breaking Strength | |
| Self Adhesive Tapes - Measurement of Elongation at Break | |
| Self Adhesive Tapes - Measurement of Peel Adhesion from Stainless Steel or from Its Own Backing | |
| Self Adhesive Tapes - Measurement of Quick Stick | |
| Self adhesive tapes - Measurement of static shear adhesion | |
| Self Adhesive Tapes - Measurement of Thickness | |
| Self Adhesive Tapes - Measurement of Unwind Adhesion at Low Speed | |
| SET of BS EN 1991-1-2:2002 & NATIONAL ANNEX | |
| Single Mode Optical Cable (Duct/Direct Buried Installation) | |
| Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Digital microprocessor integrated circuits | |
| Specification for Harmonized system of quality assessment for electronic components - Family specification - Digital integrated TTL circuits Series 54, 64, 74, 84 | |
| Specification for Harmonized system of quality assessment for electronic components - Family specification - Digital integrated TTL low power SCHOTTKY circuits Series 54LS, 64LS, 74LS, 84LS | |
| Specification for Harmonized system of quality assessment for electronic components - Family specification - Digital integrated TTL-SCHOTTKY circuits - Series 54S, 64S, 74S, 84S | |
| Specification for Harmonized system of quality assessment for electronic components - Family specification - TTL advanced low power SCHOTTKY digital integrated circuits - Series 54 ALS, 74 ALS | |
| Specification for Harmonized system of quality assessment for electronic components - Family specification - TTL advanced SCHOTTKY digital integrated circuits - Series 54 AS, 74 AS | |
| Specification for Harmonized system of quality assessment for electronic components - Family specification - TTL FAST digital integrated circuits - Series 54 F, 74 F | |
| Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles | |
| Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other road vehicles | |
| Specifications for Flexible Intermediate Bulk Containers (FIBCs) For Non-Dangerous Goods | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries Part 1: General aspects | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries Part 3: Cement industry | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries Part 4: Aluminium industry | |
| Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Part 4: Sampling and analysis of dioxin-like PCBs | |
| Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs Part 2: Extraction and Clean-Up | |
| Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries Part 2: Iron and steel industry | |
| Stationary Source Emissions - Manual Method of Determination of HCI - Part 1: Sampling of Gases | |
| Stationary Source Emissions - Manual Method of Determination of HCI - Part 2: Gaseous Compounds Absorption | |
| Stationary Source Emissions - Manual Method of Determination of HCI - Part 3: Absorption Solutions Analysis and Calculation | |
| Stationary source emissions \x97 Determination of greenhouse gas (GHG) emissions in energy-intensive industries Part 5: Lime industry | |
| Stationary source emissions \x97 Determination of greenhouse gas (GHG) emissions in energy-intensive industries Part 6: Ferroalloy industry | |
| Structural Adhesives - Corrosion - Part 1: Determination and Classification of Corrosion to a Copper Substrate | |
| Structural Adhesives - Corrosion - Part 2: Determination and Classification of Corrosion to a Brass Substrate | |
| Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method | |
| Structural adhesives Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method | |
| Structural timber - Strength classes - Assignment of visual grades and species | |
| Structural timber Strength classes Assignment of visual grades and species | |
| Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agents Obtained by Condensation of Ethylene Oxide | |
| Surfaces for Sports Areas - Determination of Thickness of Synthetic Sports Surfaces | |
| Test Method for Hydraulic Setting Floor Smoothing and/or Levelling Compounds - Standard Mixing Procedures | |
| Test Methods for Aluminium and Aluminium Alloy Products Part 1: Determination of Electrical Conductivity of Wrought Aluminium Alloys | |
| Test Methods for Aluminium and Aluminium Alloy Products Part 5: Determination of Cladding Thickness and Copper Diffusion of Clad Semi-Finished Products | |
| Textile Floor Coverings - Tests Using the Lisson Tretrad Machine | |
| Textiles - Standard Atmospheres for Conditioning and Testing | |
| Textiles - Tests for Colour Fastness Part A01: General Principles of Testing | |
| Textiles - Tests for Colour Fastness Part B02: Colour Fastness to Artificial Light (Xenon Arc Fading Lamp Test) | |
| Textiles - Tests for Colour Fastness Part C01: Colour Fastness to Washing: Test 1 | |
| Textiles - Tests for Colour Fastness Part C02: Colour Fastness to Washing: Test 2 | |
| Textiles - Tests for Colour Fastness Part C03: Colour Fastness to Washing: Test 3 | |
| Textiles - Tests for Colour Fastness Part C04: Colour Fastness to Washing: Test 4 | |
| Textiles - Tests for Colour Fastness Part C05: Colour Fastness to Washing: Test 5 | |
| Textiles - Tests for Colour Fastness Part C06: Colour Fastness to Domestic and Commercial Laundering | |
| Textiles - Tests for Colour Fastness Part N01: Colour Fastness to Bleaching: Hypochlorite | |
| Textiles. Tests for colour fastness. Grey scale for assessing change in colour (including half-steps) | |
| Textiles. Tests for colour fastness. Grey scale for assessing staining (including half-steps) | |
| Thermal Performance of Building Products and Components - Specific Criteria for the Assessment of Laboratories Measuring Heat Transfer Properties - Part 1: Common Criteria | |
| Thermal Performance of Building Products and Components - Specific Criteria for the Assessment of Laboratories Measuring Heat Transfer Properties - Part 3: Measurements by Heat Flow Meter Method | |
| Thermal Performance of Building Products and Components - Specific Criteria for the Assessment of Laboratories Measuring Heat Transfer Properties - Part 4: Measurements by Hot Box Methods | |
| Thermal Performance of Building Products and Components - Specific Criteria for the Assessment of Laboratories Measuring Heat Transfer Properties - Part 5: Measurements by Pipe Test Methods | |
| Thermal Performance of Buildings - Determination of Thermal Resistance by Hot Box Method Using Heat Flow Meter - Masonry | |
| Thermoplastics Piping Systems - Joints for Buried Non-Pressure Sewerage Applications - Test Method for Long-Term Sealing Performance of Joints with Thermoplastic Elastomer (TPE) Seals by Estimating the Sealing Pressure | |
| Tracked Changes (Redline) - Aircraft ground support equipment \x97 General requirements \x97 Part 1: Basic safety requirements | |
| Tracked Changes (Redline) - Application equipment for coating materials \x97 Safety requirements | |
| Tracked Changes (Redline) - Cement Part 2: Assessment and verification of constancy of performance | |
| Tracked Changes (Redline) - Child use and care articles - Wheeled child conveyances Part 1: Pushchairs and prams | |
| Tracked Changes (Redline) - Copper and copper alloys - Copper cathodes | |
| Tracked Changes (Redline) - Copper and copper alloys - Ingots and castings | |
| Tracked Changes (Redline) - Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of construction works and imposed loads for buildings | |
| Tracked Changes (Redline) - Eurocode 1 - Actions on structures - Part 1-5: Thermal actions | |
| Tracked Changes (Redline) - Eurocode 1 - Actions on structures Part 1-7: Accidental actions | |
| Tracked Changes (Redline) - Eurocode 1 - Actions on structures Part 2: Traffic loads on bridges and other civil engineering works | |
| Tracked Changes (Redline) - Eurocode 1 \x97 Actions on structures Part 1-2: Actions on structures exposed to fire | |
| Tracked Changes (Redline) - Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings | |
| Tracked Changes (Redline) - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements | |
| Tracked Changes (Redline) - Eurocode 3 - Design of steel structures - Part 1-7: Plate assemblies with elements under transverse loads | |
| Tracked Changes (Redline) - Eurocode 3 - Design of steel structures - Part 1-8: Joints | |
| Tracked Changes (Redline) - Eurocode 3 - Design of steel structures Part 1-6: Strength and stability of shell structures | |
| Tracked Changes (Redline) - Eurocode 3 \x97 Design of steel structures \x97 Part 1-3: Cold-formed members and sheeting | |
| Tracked Changes (Redline) - Eurocode 3 \x97 Design of steel structures \x97 Part 1-4: Stainless steel structures | |
| Tracked Changes (Redline) - Eurocode 3. Design of steel structures Structural fire design | |
| Tracked Changes (Redline) - Eurocode 5 - Design of timber structures - Part 1-2: Structural fire design | |
| Tracked Changes (Redline) - Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures | |
| Tracked Changes (Redline) - Eurocode 6 - Design of masonry structures - Part 1-2: Structural fire design | |
| Tracked Changes (Redline) - Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution | |
| Tracked Changes (Redline) - Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures | |
| Tracked Changes (Redline) - Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges | |
| Tracked Changes (Redline) - Eurocode 8 - Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings and bridges | |
| Tracked Changes (Redline) - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting | |
| Tracked Changes (Redline) - Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures | |
| Tracked Changes (Redline) - Eurocode 9 \x97 Design of aluminium structures \x97 Part 1-2: Structural fire design | |
| Tracked Changes (Redline) - Feather and down - Terms and definitions | |
| Tracked Changes (Redline) - Gas infrastructure \x97 Underground gas storage Part 1: Functional recommendations for storage in aquifers | |
| Tracked Changes (Redline) - Gas infrastructure \x97 Underground gas storage Part 3: Functional recommendations for storage in solution-mined salt caverns | |
| Tracked Changes (Redline) - Gas infrastructure \x97 Underground gas storage Part 4: Functional recommendations for storage in rock caverns | |
| Tracked Changes (Redline) - Gas infrastructure \x97 Underground gas storage Part 5: Functional recommendations for surface facilities | |
| Tracked Changes (Redline) - Industrial valves \x97 Marking of metallic valves | |
| Tracked Changes (Redline) - Inland navigation vessels \x97 Work boats, ship's boats and lifeboats | |
| Tracked Changes (Redline) - Methods of testing cement Part 10: Determination of the water-soluble chromium (VI) content of cement | |
| Tracked Changes (Redline) - Methods of testing cement Part 1: Determination of strength | |
| Tracked Changes (Redline) - Methods of testing cement Part 3: Determination of setting times and soundness | |
| Tracked Changes (Redline) - Methods of testing cement Part 6: Determination of fineness | |
| Tracked Changes (Redline) - Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation) | |
| Tracked Changes (Redline) - Safety of woodworking machines - Circular sawing machines Part 6: Circular sawing machines for fire wood | |
| Tracked Changes (Redline) - Safety requirements for cableway installations designed to carry persons \x97 Recovery and evacuation | |
| Tracked Changes (Redline) - Sanitary tapware - Single taps and - combination taps for water supply systems of - type 1 and type 2 - General technical - specification | |
| Tracked Changes (Redline) - Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles | |
| Tracked Changes (Redline) - Structural Timber - Strength classes - Assignment of visual grades and species | |
| Tracked Changes (Redline) - Ventilation for buildings \x97 Air handling units \x97 Mechanical performance | |
| Tracked Changes (Redline) - Wood flooring and wood panelling and cladding - Determination of dimensional stability | |
| Tracked Changes (Redline) - Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method) | |
| Tracked Changes (Redline) - Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method) | |
| Tranportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities form 0,5 Litre up to and Including 150 Litres -... | |
| Transportable Gas Cylinders - Cylinders for Compressed Gases (Excluding Acetylene) - Inspection at Time of Filling | |
| Transportable Gas Cylinders - Cylinders for Liquefied Gases (Excluding Acetylene and LPG) - Inspection at Time of Filling | |
| Transportable Gas Cylinders - Periodic Inspection and Testing of Seamless Steel Gas Cylinders | |
| Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Aluminium and Aluminium Alloy Gas Cylinders of Capacity from 0,5 Litre up to 150 Litre | |
| Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities from 0,5 Litre up to and Including 150 Litres -... | |
| UK National Annex for Eurocode - Basis of structural design | |
| UK National Annex for Eurocode 0 Basis of structural design | |
| UK National Annex to Eurocode 1 - Actions on structures Part 1-4: General actions - Wind actions | |
| UK National Annex to Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings | |
| UK National Annex to Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire | |
| UK National Annex to Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions | |
| UK National Annex to Eurocode 1: Actions on structures - Part 1-6: General actions - Actions during execution | |
| UK National Annex to Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges | |
| UK National Annex to Eurocode 1: Actions on structures - Part 3: Actions induced by cranes and machinery | |
| UK National Annex to Eurocode 1: Actions on structures - Part 4: Silos and tanks | |
| UK National Annex to Eurocode 1: Actions on structures \x97 Part 1-3: General actions \x97 Snow loads | |
| UK National Annex to Eurocode 1: Actions on structures Part 1-3: General actions - Snow loads | |
| UK National Annex to Eurocode 2: Design of concrete structure Part 2: Concrete bridges - Design and detailing rules | |
| UK National Annex to Eurocode 2: Design of concrete structures - Part 1-1: General rules and reles for buildings | |
| UK National Annex to Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures | |
| UK National Annex to Eurocode 2: Design of concrete structures \x97 Part 4: Design of fastenings for use in concrete | |
| UK National Annex to Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire design | |
| UK National Annex to Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700 | |
| UK National Annex to Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements | |
| UK National Annex to Eurocode 3: Design of steel structures - Part 1-9: Fatigue | |
| UK National Annex to Eurocode 3: Design of steel structures - Part 2: Steel bridges | |
| UK National Annex to Eurocode 3: Design of steel structures - Part 5: Piling | |
| UK National Annex to Eurocode 3: Design of steel structures Part 1-11: Design of structures with tension components | |
| UK National Annex to Eurocode 3: Design of steel structures Part 1-1: General rules and rules for buildings | |
| UK National Annex to Eurocode 3: Design of steel structures Part 1-2: General rules - Structural fire design | |
| UK National Annex to Eurocode 3: Design of steel structures Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting | |
| UK National Annex to Eurocode 3: Design of steel structures Part 1-4: General rules - Supplementary rules for stainless steels | |
| UK National Annex to Eurocode 3: Design of steel structures Part 1-8: Design of joints | |
| UK National Annex to Eurocode 3: Design of steel structures Part 3-1: Towers, masts and chimneys - Towers and masts | |
| UK National Annex to Eurocode 3: Design of steel structures Part 6: Crane supporting structures | |
| UK National Annex to Eurocode 3: Design of structures - Part 2: Steel bridges | |
| UK National Annex to Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings | |
| UK National Annex to Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design | |
| UK National Annex to Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges | |
| UK National Annex to Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings | |
| UK National Annex to Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design | |
| UK National Annex to Eurocode 5: Design of timber structures - Part 2: Bridges | |
| UK National Annex to Eurocode 5: Design of timber structures \x97 Part 1-1: General \x97 Common rules and rules for buildings | |
| UK National Annex to Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures | |
| UK National Annex to Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design | |
| UK National Annex to Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry | |
| UK National Annex to Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures | |
| UK National Annex to Eurocode 7: Geotechnical design - Part 1: General rules | |
| UK National Annex to Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing | |
| UK National Annex to Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings | |
| UK National Annex to Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges | |
| UK National Annex to Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines | |
| UK National Annex to Eurocode 8: Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects | |
| UK National Annex to Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys | |
| UK National Annex to Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules | |
| UK National Annex to Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design | |
| UK National Annex to Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue | |
| UK National Annex to Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting | |
| UK National Annex to Eurocode 9: Design of aluminium structures Part 1-5: Shell structures | |
| Ventilation for Buildings - Air Handling Units - Mechanical Performance | |
| Walking Aids - General Requirements and Test Methods | |
| Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition | |
| Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples | |
| Wood and Parquet Flooring and Wood Panelling and Cladding-Determinati on of Dimensional Stability | |
| Wood Preservatives - Determination of the Protective Effectiveness Against Lyctus Brunneus (Stephens) - Part 1: Application by Surface Treatment (Laboratory Method) | |
| Wood Preservatives - Determination of the Protective Effectiveness Against Lyctus Brunneus (Stephens) - Part 2: Application by Impregnation (Laboratory Method) |
| << Prev | Next >> |