Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
270
280
290
300
310
320
326
327
328
329
330
331
332
333
334
335
336
337
338
340
350
360
370
380
390
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment Part 1: Simplified cases where the equipment mobilities are much... | |
| Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions | |
| Adhesives - Determination of tensile strength of butt joints | |
| Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners | |
| Agricultural and forestry tractors - Passenger seat - Requirements and test procedures | |
| Agricultural Machinery - Agricultural Self-Propelled Mounted, Semi-Mounted and Trailed Machines - Common Safety Requirements | |
| Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool | |
| Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances Part 1: Cab classification, requirements and test procedures | |
| Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances Part 2: Filters, requirements and test procedures | |
| Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures | |
| Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air | |
| Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards | |
| Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition | |
| Ambient air quality - Standard method for the determination of mercury deposition | |
| Ambient air quality - Standard method for the determination of total gaseous mercury | |
| Anaesthetic and respiratory equipment - Noninterchangeable screwthreaded (NIST) low-pressure connectors for medical gases | |
| Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion | |
| Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES | |
| Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation | |
| Animal feeding stuffs - Determination of nicarbazin - Highperformance liquid chromatographic method | |
| Animal feeding stuffs - Determination of OC-pesticides and PCB's by GC/ECD | |
| Animal feeding stuffs - Determination of OC-pesticides and PCB's by GC/MS | |
| Animal feeding stuffs - Determination of zearalenone in animal feed - High performance liquid chromatographic method with fluorescence detection and immunoaffinity column clean-up | |
| Animal feeding stuffs - Isolation and enumeration of Bifidobacterium spp. | |
| Animal feeding stuffs - Isolation and enumeration of Enterococcus (E. faecium) spp. | |
| Animal feeding stuffs - Isolation and enumeration of Lactobacillus spp. | |
| Animal feeding stuffs - Isolation and enumeration of Pediococcus spp. | |
| Animal feeding stuffs - Isolation and enumeration of presumptive Bacillus spp. | |
| Animal feeding stuffs - Isolation and enumeration of yeast probiotic strains | |
| Automotive fuels \x97 Fatty acid methyl ester (FAME) fuel and blends with diesel fuel \x97 Determination of oxidation stability by accelerated oxidation method | |
| Bar Coding - Data Identifiers | |
| Bar Coding - Multi-Industry Transport Label | |
| Bar Coding - Terminology | |
| Bar Coding - Unique Identifier for Transport Units | |
| Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method | |
| Building hardware - Mechatronic cylinders - Requirements and test methods | |
| Building hardware \x97 Requirements and test methods \x97 Multipoint locks, latches and locking plates \x97 Characteristics and test methods | |
| Building Valves - Water Pressure Reducing Valves and Combination Water Reducing Valves - Requirements and Tests | |
| Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | |
| Cellular Plastics - Cell count procedure for flexible and rigid polyurethane | |
| Cereals and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) | |
| Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitreous grains | |
| Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste | |
| Characterization of waste \x97 Leaching behaviour test for basic characterization \x97 Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions | |
| Chemicals used for the treatment of swimming pool water - Iron based coagulants | |
| Chemicals used for treatment of swimming pool water - Calcium hypochlorite | |
| Classification and characteristics of techniques for renovation and repair of drains and sewers | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 1: Test methods for characterisation of compounds and products | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 4: Specifications for decking profiles and tiles | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 5: Specifications for cladding profiles and tiles | |
| Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 6: Specifications for fencing profiles and elements | |
| Conservation of cultural heritage - Indoor climate Part 2: Ventilation management for the protection of cultural heritage buildings and collections | |
| Conservation of cultural property - Indoor climate Part 1: Guidelines for heating churches, chapels and other places of worship | |
| Conservation of cultural property - Main general terms and definitions | |
| Conservation of cultural property - Test methods - Colour measurement of surfaces | |
| Conservation of cultural property - Test methods - Determination of static contact angle | |
| Conservation of cultural property - Test methods - Determination of water absorption by capillarity | |
| Conservation of cultural property - Test methods - Determination of water vapour permeability (delta p) | |
| Conservation of Cultural Property \x97 Procedures and instruments for measuring temperatures of the air and the surfaces of objects | |
| Conservation of Cultural Property \x97 Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials | |
| Conveyor belts - Drum friction testing | |
| Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of iron content Part 2: Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) | |
| Copper and copper alloys - Inductively coupled plasma optical emission spectrometry | |
| Copper and copper alloys \x97 Determination of manganese content Part 2: Flame atomic absorption spectrometric method (FAAS) | |
| Customer Contact Centres - Requirements for service provision | |
| Cycles - Terminology | |
| Cylindrical helical springs made of round wire - Quality specifications for cold coiled compression springs | |
| Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods | |
| Derivatives from coal pyrolysis - Terminology | |
| Determination of explosion points of flammable liquids | |
| District heating pipes - Pre-insulated flexible pipe systems Part 1: Classification, general requirements and test methods | |
| District heating pipes - Pre-insulated flexible pipe systems Part 2: Bonded plastic service pipes - Requirements and test methods | |
| District heating pipes - Pre-insulated flexible pipe systems Part 3: Non bonded system with plastic service pipes; requirements and test methods | |
| District heating pipes - Pre-insulated flexible pipe systems Part 4: Bonded system with metal service pipes; requirements and test methods | |
| District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing... | |
| District heating pipes \x97 Preinsulated bonded twin pipe systems for directly buried hot water networks Part 2: Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer... | |
| Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods | |
| Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods | |
| Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings Part 1: Polyurethane lining of pipes and fittings | |
| Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes... | |
| Earth-moving machinery - Design requirements for circulation on the road | |
| EDI - Message - Arrival Notice Message (IFTMAN) | |
| EDI - Message - Bayplan/Stowage Plan Occupied and Empty Locations (BAPLIE) | |
| EDI - Message - Bayplan/Stowage Plan Total Numbers Message (BAPLTE) | |
| EDI - Message - Booking Confirmation Message (IFTMBC) | |
| EDI - Message - Customs Declaration Message (CUSDEC) | |
| EDI - Message - Firm booking message (IFTMBF) | |
| EDI - Message - Forwarding and Consolidation Summary Message (IFCSUM) | |
| EDI - Message - Instruction Contract Status Message (IFTMCS) | |
| EDI - Message - Instruction Message (IFTMIN) | |
| EDI - Message - Payroll Deductions Advice Message (PAYDUC) | |
| EDI - Message - Provisional Booking Message (IFTMBP) | |
| EDI - Message - Remittance Advice Message (REMADV) | |
| Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods | |
| Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 Part 2: Abstract test suite | |
| Electronic fee collection - Evaluation of onboard and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes | |
| Electronic fee collection - Evaluation of onboard and roadside equipment for conformity to EN 15509 Part 1: Test suite structure and test purposes | |
| Electronic fee collection \x97 Conformity evaluation of on-board and roadside equipment to EN 15509 | |
| Energy efficiency services - Definitions and requirements | |
| Energy performance of buildings - Overall energy use and definition of energy ratings | |
| Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method | |
| Ethanol as a blending component for petrol \x97 Determination of total dry residue (involatile material) \x97 Gravimetric method | |
| Ethanol as a blending component for petrol \x97 Determination of water content \x97 Karl Fischer potentiometric titration method | |
| Extended application of results from fire resistance tests for service installations Part 1: Ducts | |
| Extended application of results from fire resistance tests for service installations Part 2: Fire dampers | |
| Extended application of results from fire resistance tests for service installations Part 4: Linear joint seals | |
| Extended application of results from fire resistance tests for service installations Part 5: Combined penetration seals | |
| Extended application of results from fire resistance tests for service installations. Part 1: Ducts | |
| Extended application reports on the fire performance of construction products and building elements | |
| Extended applications of results from fire resistance tests for service installations Part 3: Penetration seals | |
| Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) | |
| Fertilizers - Determination of calcium and formate in calcium foliar fertilizers | |
| Fertilizers - Determination of cyanamide nitrogen | |
| Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Arnd | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch | |
| Fertilizers - Determination of sulfates content using three different methods | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates | |
| Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free | |
| Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods | |
| Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) | |
| Fertilizers - Determination of urease inhibitor N-(n-butyl)thiophosp horic triamide (NBPT) using high-performance liquid chromatography (HPLC) | |
| Film identification - Enhancing interoperability of metadata - Element sets and structures | |
| Film identification - Minimum set of metadata for cinematographic works | |
| Fire Extinguishing Media - Foam Concentrates - Part 1: Specification for Medium Expansion Foam Concentrates for Surface Application to Water-Immiscible Liquids | |
| Fire Extinguishing Media - Foam Concentrates - Part 2: Specification for High Expansion Foam Concentrates for Surface Application to Water-Immiscible Liquids | |
| Fire Extinguishing Media - Foam Concentrates - Part 3: Specification for Low Expansion Foam Concentrates for Surface Application to Water-Immiscible Liquids | |
| Fire Extinguishing Media - Foam Concentrates - Part 4: Specification for Low Expansion Foam Concentrates for Surface Application to Water-Miscible Liquids | |
| Fire-fighting hoses - Test methods | |
| Flanges and Their Joints - Design Rules for Gasketed Circular Flange Connections - Part 1: Calculation Method | |
| Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices | |
| Floating leisure articles for use on and in the water Part 1: Classification, materials, general requirements and test methods | |
| Floating leisure articles for use on and in the water Part 2: Consumer information | |
| Floating leisure articles for use on and in the water Part 3: Additional specific safety requirements and test methods for Class A devices | |
| Floating leisure articles for use on and in the water Part 4: Additional specific safety requirements and test methods for Class B devices | |
| Floating leisure articles for use on and in the water Part 5: Additional specific safety requirements and test methods for Class C devices | |
| Floating leisure articles for use on and in the water Part 6: Additional specific safety requirements and test methods for Class D devices | |
| Floating leisure articles for use on and in the water Part 7: Additional specific safety requirements and test methods for class E devices | |
| Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements | |
| Food processing machinery - Smokehouses - Safety and hygiene requirements | |
| Foods of plant origin - Determination of pesticide residues using GC-MS and/or LC-MS/MS following acetonitrile extraction/ partitioning and clean-up by dispersive SPE - QuEChERS-method | |
| Foods of plant origin - Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth | |
| Foodstuffs - Detection of food allergens - General considerations and validation of methods | |
| Foodstuffs - Detection of food allergens by immunological methods Part 1: General considerations | |
| Foodstuffs - Detection of food allergens by molecular biological methods Part 1: General considerations | |
| Foodstuffs - Detection of food allergens by molecular biological methods Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages... | |
| Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection | |
| Foodstuffs - Determination of d-biotin by HPLC | |
| Foodstuffs - Determination of Deoxynivalenol in animal feed - HPLC method with immunoaffinity column clean-up | |
| Foodstuffs - Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and UV detection | |
| Foodstuffs - Determination of niacin by HPLC | |
| Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection | |
| Foodstuffs - Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs - HPLC method with immunoaffinity column cleanup and fluorescence detection | |
| Foodstuffs - Determination of patulin in fruit juice and fruit based pur\xe9e for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV... | |
| Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion | |
| Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion | |
| Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion | |
| Foodstuffs - Determination of zearalenone in maize based baby food, barley flour, maize flour, polenta, wheat flour and cereal based foods for infants and young children - HPLC method with... | |
| Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection | |
| Foodstuffs \x97 Detection of food allergens by molecular biological methods Part 2: Celery (Apium graveolens) \x97 Detection of a specific DNA sequence in cooked sausages by real-time PCR | |
| Foodstuffs \x97 Detection of food allergens by molecular biological methods Part 3: Hazelnut (Corylus avellana) \x97 Qualitative detection of a specific DNA sequence in chocolate by real-time PCR | |
| Foodstuffs \x97 Detection of food allergens by molecular biological methods Part 4: Peanut (Arachis hypogaea) \x97 Qualitative detection of a specific DNA sequence in chocolate by real-time PCR | |
| Founding - Austempered Ductile Cast Irons | |
| Founding - Designation System for Cast Iron - Material Symbols and Material Numbers | |
| Founding - Grey Cast Irons | |
| Founding - Malleable Cast Irons | |
| Founding - Spheroidal graphite cast irons | |
| Founding - Technical Conditions of Delivery - Part 4: Additional Requirements for Aluminium Alloy Castings | |
| Founding - Technical Conditions of Delivery - Part 6: Additional Requirements for Zinc Alloy Castings | |
| Founding - Technical Conditions of Delivery Part 1: General | |
| Founding - Technical Conditions of Delivery Part 2: Additional Requirements for Steel Castings | |
| Founding - Technical Conditions of Delivery Part 3: Additional Requirements for Iron Castings | |
| Founding - Technical Conditions of Delivery Part 5: Additional Requirements for Magnesium Alloy Castings | |
| Glass in building - Thermally toughened soda lime silicate channel shaped safety glass Part 1: Definition and description | |
| Glass in building \x97 Adhesive backed polymeric film Part 1: Definitions and requirements | |
| Glass in building \x97 Adhesive backed polymeric filmed glass Part 1: Definitions and requirements | |
| Glass in building \x97 Basic alumino silicate glass products Part 1: Definitions and general physical and mechanical properties | |
| Glass in Building \x97 Basic alumino silicate glass products Part 2: Product standard | |
| Glass in building \x97 Heat soaked thermally toughened alkaline earth silicate safety glass Part 1: Definition and description | |
| Glass in building \x97 Heat soaked thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/Product standard | |
| Glass in building \x97 Thermally toughened soda lime silicate channel shaped safety glass Part 2: Evaluation of conformity/Product standard | |
| Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids | |
| Glass packaging - Standard tolerances for flaconnage | |
| Hardware for furniture - Strength and durability of hinges and their components - Hinges pivoting on a vertical axis | |
| Hardware for furniture - Strength and durability of hinges and their components - Stays and hinges pivoting on a horizontal axis | |
| Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts | |
| Ice skates - Safety requirements and test methods | |
| Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines | |
| Industrial valves - Actuators Part 1: Terminology and definitions | |
| Industrial valves - Actuators Part 2: Electric actuators for industrial valves - Basic requirements | |
| Industrial valves - Actuators Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements | |
| Industrial valves - Actuators Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements | |
| Industrial valves - Actuators Part 6: Hydraulic linear actuators for industrial valves - Basic requirements | |
| Industrial valves \x97 Actuators Part 5: Pneumatic linear actuators for industrial valves \x97 Basic requirements | |
| Influence of materials on water intended for human consumption \x97 GC-MS identification of water leachable organic substances | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation | |
| Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release Part 2: Test waters | |
| Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Part 1: General requirements | |
| Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Part 2: Onshore unit, safety requirements | |
| Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Part 3: On-board unit, safety requirements | |
| Intelligent transport systems - eSafety - eCall minimum set of data (MSD) | |
| Knee and elbow protectors for indoor sports - Safety requirements and test methods | |
| Light weight fill and thermal insulation products for civil engineering applications (CEA) \x97 Expanded clay lightweight aggregate products (LWA) | |
| Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water | |
| LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements | |
| Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines | |
| Machines and plants for mining and tooling of natural stone \x97 Safety \x97 Requirements for surface finishing machines | |
| Maintenance - Qualification of Maintenance personnel | |
| Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods | |
| Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid | |
| Non-destructive testing - Acoustic emission - Testing of fibrereinforced polymers - Specific methodology and general evaluation criteria | |
| Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels | |
| One off Kachelgrund\xf6fen/P utzgrund\xf6fen (tiled/mortared stoves) - Dimensioning | |
| Packaging - Braille on packaging for medicinal products | |
| Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains | |
| Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia | |
| Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone | |
| Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements | |
| Paper and board - Determination of the cytotoxicity of aqueous extracts | |
| Particulate air filters for general ventilation - Standardised dimensions | |
| Petroleum products and fat and oil derivates \x97 Fatty acid methyl esters (FAME) for diesel engines \x97 Determination of polyunsaturated (greater than or equal to 4 double bonds) fatty acid... | |
| Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method | |
| Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm | |
| Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm | |
| Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods | |
| Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods | |
| Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Within the Building Structure - Chlorinated Poly(Vinyl Chloride) (PVC-C) - Part 1: Specifications for Pipes, Fittings and the... | |
| Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) Within the Building Structure - Styrene Copolymer Blends (SAN+PVC) - Part 1: Specifications for Pipes, Fittings and the... | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system | |
| Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 3: Fittings | |
| Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 3: Fittings | |
| Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements | |
| Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability | |
| Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature | |
| Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures | |
| Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness | |
| Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried | |
| Polymer modified bituminous thick coatings for waterproofing - Resistance to compression | |
| Polymer modified bituminous thick coatings for waterproofing - Water resistance | |
| Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors Part 1: General requirements for portable monitor assemblies | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors Part 2: Water nozzles | |
| Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors Part 3: Foam devices | |
| Pre-shaped growing media - Determination of length, width, height, volume and bulk density | |
| Precast concrete products - Resin bound concrete - Requirements and test methods | |
| Print media surveys - Vocabulary and service requirements | |
| Products used for the treatment of swimming pool water - Filter media | |
| Products used for treatment of swimming pool water - Powdered activated carbon | |
| Products used for treatment of water intended for human consumption - Natural unexpanded aluminosilicates | |
| Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing | |
| Public transport - Service interface for real-time information relating to public transport operations Part 1: Context and framework | |
| Public transport - Service interface for real-time information relating to public transport operations Part 3: Functional service interfaces | |
| Public transport \x97 Service interface for real-time information relating to public transport operations Part 2: Communications | |
| Railway applications - Braking - Automatic variable load sensing devices | |
| Railway applications - Braking - Brake pipe accelerator valve | |
| Railway applications - Braking - Empty-loaded changeover devices | |
| Railway applications - Braking - Emptyloaded changeover devices | |
| Railway applications - Braking - Relay valves | |
| Railway applications - Braking - Static brake testing | |
| Railway applications - Braking - Wheel slide protection | |
| Railway applications - Braking systems of high speed trains Part 1: Requirements and definitions | |
| Railway applications - Braking systems of high speed trains Part 2: Test methods | |
| Railway applications - Closing and locking devices for payload protecting devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling | |
| Railway applications - Definition of vehicle reference masses | |
| Railway applications - Marking on railway vehicles - Part 1: Freight wagons | |
| Railway applications - Marking on railway vehicles Part 1: Freight wagons | |
| Railway applications - Measurement of vertical forces on wheels and wheelsets Part 1: On-track measurement sites for vehicles in service | |
| Railway applications - Measurement of vertical forces on wheels and wheelsets Part 2: Test in workshop for new, modified and maintained vehicles | |
| Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation | |
| Railway applications - Railway rolling stock - Buffers | |
| Railway applications - Railway rolling stock - Draw gear and screw coupling | |
| Railway applications - Requirements for bogies and running gears | |
| Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces | |
| Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in... | |
| Railway applications - Track - Restoration of rails by electric arc welding | |
| Railway applications - Track - Road-rail machines and associated equipment Part 1: Technical requirements for running and working | |
| Railway applications - Track - Road-rail machines and associated equipment Part 2: General safety requirements | |
| Railway applications - Track - Road-rail machines and associated equipment Part 4: Technical requirements for running, travelling and working on urban rail | |
| Railway applications - Track - Roadrail machines and associated equipment - Part 2: General safety requirements | |
| Railway applications - Track - Switches and crossings - Crossing components made of cast austenitic manganese steel | |
| Railway applications - Vehicle reference masses | |
| Railway applications \x97 Acoustics \x97 Rail and wheel roughness measurement related to noise generation | |
| Railway applications \x97 Braking systems of high speed trains Part 1: Requirements and definitions | |
| Railway applications \x97 Braking systems of high speed trains Part 2: Test methods | |
| Railway applications \x97 Markings of railway vehicles Part 2: External markings on coaches, motive power units, locomotives and on track machines | |
| Railway applications \x97 Noise Emission \x97 Measurement of noise inside driver's cabs | |
| Railway applications \x97 Pneumatic half couplings | |
| Railway applications \x97 Testing for the acceptance of running characteristics of railway vehicles \x97 Freight wagons \x97 Testing of running safety under longitudinal compressive forces | |
| Railway applications \x97 Track \x97 Road-rail machines and associated equipment Part 3: Technical requirements for running | |
| Rough-terrain variable reach trucks - Visibility - Test methods and verification | |
| Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures | |
| Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test | |
| Safety for conveyor belts for winter sport or leisure use | |
| Safety requirements for lifting tables Part 1: Lifting tables serving up to two fixed landings | |
| Safety requirements for lifting tables Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s... | |
| Safety Requirements for Lifting Tables | |
| Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods | |
| Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods | |
| Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways Part 1: Sealants for facade elements | |
| Sealants for non-structural use in joints in buildings and pedestrian walkways Part 5: Evaluation of conformity and marking | |
| Sealants for nonstructural use in joints in buildings and pedestrian walkways Part 2: Sealants for glazing | |
| Sealants for nonstructural use in joints in buildings and pedestrian walkways Part 3: Sealants for sanitary joints | |
| Sealants for nonstructural use in joints in buildings and pedestrian walkways Part 4: Sealants for pedestrian walkways | |
| Secure destruction of confidential material - Code of practice | |
| Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units | |
| Security service providers - Terminology | |
| Self storage - Specification for self storage services | |
| Services of real estate agents - Requirements for the provision of services of real estate agents | |
| Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements | |
| Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index | |
| Specifications for external renders and internal plasters based on organic binders | |
| Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements | |
| Sports and recreational facilities - Ropes courses - Part 2: Operation requirements | |
| Sports and recreational facilities - Ropes courses Part 1: Construction and safety requirements | |
| Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances | |
| Steel static storage systems - Application and maintenance of storage equipment | |
| Steel static storage systems - Specification of storage equipment | |
| Steel static storage systems - Terms and definitions | |
| Supersulfated cement - Composition, specifications and conformity criteria | |
| Surface Active Agents - Colorimetric Characterization of Optically Clear Coloured Liquids (Products) as X, Y, Z Tristimulus Values in Transmission | |
| Surface active agents - Determination of the dispersing effect of surfactants on powder | |
| Surface active agents - Quantitative determination of free fatty acid in alkylamidopropylbeta ines - Gas-chromatographic method | |
| Surfaces for Sports Areas - Determination of the Behaviour under a Rolling Load | |
| Sustainability of construction works - Assessment of buildings Part 2: Framework for the assessment of environmental performance | |
| Sustainability of construction works - Assessment of buildings Part 3: Framework for the assessment of social performance | |
| Sustainability of construction works - Assessment of buildings Part 4: Framework for the assessment of economic performance | |
| Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products | |
| Sustainability of construction works - Framework for assessment of buildings and civil engineering works | |
| Sustainability of construction works - Sustainability assessment of buildings Part 1: General framework | |
| Sustainability of construction works \x96 Sustainability assessment of buildings and civil engineering works Part 5: Framework on specific principles and requirement for civil engineering works | |
| Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling Part 1: Direct exchange-to-water heat pumps | |
| Textile floor coverings - Classification of machine-made rugs and runners without pile | |
| Textile floor coverings \x97 Minimum requirements for needled floor coverings for single usage in events of limited duration | |
| Textiles - Methods of testing the fibre proof properties of fabrics: Rubbing test | |
| Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction | |
| Textiles - Test method for phthalates | |
| Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products Part 1: Specification for bonded and loosefill products before installation | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products Part 2: Specification for the installed products | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products Part 1: Specification for bonded and loose-fill products before installation | |
| Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products Part 2: Specification for the installed products | |
| Thermal spraying - Component related procedure qualification | |
| Timber Structures - Test methods - Torsional resistance of driving in screws | |
| Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses | |
| Tourism services - Requirements for the provision of professional tourist guide training and qualification programmes | |
| Tracked Changes (Redline) - Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions | |
| Tracked Changes (Redline) - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances Part 1: Cab classification, requirements and test procedures | |
| Tracked Changes (Redline) - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances Part 2: Filters, requirements and test procedures | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis - Detection and enumeration of Enterococcus (E. faecium) spp. used as feed additive | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis - Detection and enumeration of Lactobacillus spp. used as feed additive | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis - Detection and enumeration of Pediococcus spp. used as feed additive | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of OCPs and PCBs by GC/MS | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of OCPs by GCECD | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis \x97 Detection and enumeration of Bacillus spp. used as feed additive | |
| Tracked Changes (Redline) - Animal feeding stuffs: Methods of sampling and analysis \x97 Detection and enumeration of Saccharomyces cerevisiae used as feed additive | |
| Tracked Changes (Redline) - Automotive fuels \x97 Fatty acid methyl ester (FAME) fuel and blends with diesel fuel \x97 Determination of oxidation stability by accelerated oxidation method at 110 \xb0C... | |
| Tracked Changes (Redline) - Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method | |
| Tracked Changes (Redline) - Cereal and cereal products - Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.),triticale (Triticosecale Wittmack spp) and... | |
| Tracked Changes (Redline) - Characterization of waste \x97 Leaching behaviour test for basic characterization \x97 Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions | |
| Tracked Changes (Redline) - Chemicals used for the treatment of swimming pool water - Iron based coagulants | |
| Tracked Changes (Redline) - Chemicals used for treatment of swimming pool water - Calcium hypochlorite | |
| Tracked Changes (Redline) - Classification and characteristics of techniques for renovation, repair and replacement of drains and sewers | |
| Tracked Changes (Redline) - District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes; requirements and test methods | |
| Tracked Changes (Redline) - District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods | |
| Tracked Changes (Redline) - District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods | |
| Tracked Changes (Redline) - District heating pipes \x97 Bonded twin pipe systems for directly buried hot water networks \x97 Part 1: Factory made twin pipe assembly of steel service pipes,... | |
| Tracked Changes (Redline) - District heating pipes \x97 Bonded twin pipe systems for directly buried hot water networks \x97 Part 2: Factory made fitting and valve assemblies of steel service... | |
| Tracked Changes (Redline) - District heating pipes \x97 Factory made flexible pipe systems \x97 Part 1: Classification, general requirements and test methods | |
| Tracked Changes (Redline) - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings Part 1: Polyurethane lining of pipes... | |
| Tracked Changes (Redline) - Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509 | |
| Tracked Changes (Redline) - Electronic fee collection \x97 Evaluation of onboard and roadside equipment for conformity to EN 15509 Part 1: Test suite structure and test purposes | |
| Tracked Changes (Redline) - Electronic fee collection \x97 Evaluation of onboard and roadside equipment for conformity to EN 15509 Part 2: Abstract test suite | |
| Tracked Changes (Redline) - Ethanol as a blending component for gasoline - Determination of water content - Karl Fischer potentiometric titration method | |
| Tracked Changes (Redline) - Ethanol as a blending component for petrol \x97 Determination of dry residue (involatile material) \x97 Gravimetric method | |
| Tracked Changes (Redline) - Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers | |
| Tracked Changes (Redline) - Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports | |
| Tracked Changes (Redline) - Fertilizers - Determination of sulfates content using three different methods | |
| Tracked Changes (Redline) - Fire extinguishing media - Foam concentrates Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids | |
| Tracked Changes (Redline) - Fire extinguishing media - Foam concentrates Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids | |
| Tracked Changes (Redline) - Fire extinguishing media \x96 Foam concentrates Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids | |
| Tracked Changes (Redline) - Fire extinguishing media \x96 Foam concentrates Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids | |
| Tracked Changes (Redline) - Foods of plant origin - Multimethod for the determination of pesticide residues using GC- and LC-based analysis following acetonitrile extraction/partition ing and clean-up by dispersive SPE... | |
| Tracked Changes (Redline) - Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate... | |
| Tracked Changes (Redline) - Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate... | |
| Tracked Changes (Redline) - Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific... | |
| Tracked Changes (Redline) - Founding - Grey cast irons | |
| Tracked Changes (Redline) - Founding - Malleable cast irons | |
| Tracked Changes (Redline) - Founding - Spheroidal graphite cast irons | |
| Tracked Changes (Redline) - Founding \x97 Technical conditions of delivery Part 4: Additional requirements for aluminium alloy castings | |
| Tracked Changes (Redline) - Founding \x97 Technical conditions of delivery Part 5: Additional requirements for magnesium alloy castings | |
| Tracked Changes (Redline) - Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines | |
| Tracked Changes (Redline) - Industrial valves - Actuators Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements | |
| Tracked Changes (Redline) - Industrial valves \x97 Actuators \x97 Part 3: Pneumatic part-turn actuators for industrial valves \x97 Basic requirements | |
| Tracked Changes (Redline) - Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A Part 1: General requirements | |
| Tracked Changes (Redline) - Inland navigation vessels \x96 Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A Part 2: On-shore unit, additional requirements | |
| Tracked Changes (Redline) - Inland navigation vessels \x96 Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A Part 3: On-board unit, additional requirements | |
| Tracked Changes (Redline) - Inorganic fertilizers - Determination of cyanamide nitrogen | |
| Tracked Changes (Redline) - Inorganic fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free | |
| Tracked Changes (Redline) - Inorganic fertilizers \x97 Determination of total nitrogen in calcium cyanamide containing nitrates | |
| Tracked Changes (Redline) - LPG equipment and accessories - LPG propulsion systems for boats, yachts and other watercraft - Installation requirements | |
| Tracked Changes (Redline) - Maintenance \x97 Qualification of maintenance personnel | |
| Tracked Changes (Redline) - Oil and gas industries - Offshore production installations - Requirements and guidelines for emergency response | |
| Tracked Changes (Redline) - Particulate air filters for general ventilation - Standardised dimensions | |
| Tracked Changes (Redline) - Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method | |
| Tracked Changes (Redline) - Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods | |
| Tracked Changes (Redline) - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for... | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels \x97 Polyethylene (PE) \x97 Part 1: General | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels \x97 Polyethylene (PE) \x97 Part 3: Fittings | |
| Tracked Changes (Redline) - Plastics piping systems for the supply of gaseous fuels \x97 Polyethylene (PE) \x97 Part 4: Valves | |
| Tracked Changes (Redline) - Powder actuated hand-held fixing and hard marking tools - Safety requirements | |
| Tracked Changes (Redline) - Private security services - Terminology | |
| Tracked Changes (Redline) - Products used for the treatment of swimming pool water - Filter media | |
| Tracked Changes (Redline) - Products used for treatment of swimming pool water - Powdered activated carbon | |
| Tracked Changes (Redline) - Public transport - Service interface for real-time information relating to public transport operations Part 2: Communications | |
| Tracked Changes (Redline) - Public transport \x97 Service interface for real-time information relating to public transport operations Part 1: Context and framework | |
| Tracked Changes (Redline) - Public transport \x97 Service interface for real-time information relating to public transport operations Part 3: Functional service interfaces | |
| Tracked Changes (Redline) - Railway applications - Braking - Wheel slide protection | |
| Tracked Changes (Redline) - Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure | |
| Tracked Changes (Redline) - Railway applications - Markings of railway vehicles - Part 1: Freight wagons | |
| Tracked Changes (Redline) - Railway applications - Railway rolling stock - Buffers | |
| Tracked Changes (Redline) - Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles - Running safety under longitudinal compressive force | |
| Tracked Changes (Redline) - Railway applications \x96 Acoustics \x96 Rail and wheel roughness measurement related to noise generation | |
| Tracked Changes (Redline) - Rubber- or plastic-coated fabrics \x97 Upholstery fabrics \x97 Classification and methods of test | |
| Tracked Changes (Redline) - Safety for conveyor belts for winter sport or tourist use | |
| Tracked Changes (Redline) - Safety requirements for lifting tables Part 1: Lifting tables serving up to two fixed landing | |
| Tracked Changes (Redline) - Sanitary appliances \x97 Baths made from impact modified coextruded ABS/acrylic sheets \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Sealants for non-structural use in joints in buildings and pedestrian walkways Part 5: Assessment and verification of constancy of performance, marking and labelling | |
| Tracked Changes (Redline) - Secure destruction of confidential and sensitive material \x97 Code of practice | |
| Tracked Changes (Redline) - Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units | |
| Tracked Changes (Redline) - Specifications for external renders and internal plasters based on organic binders | |
| Tracked Changes (Redline) - Steel static storage systems - Tolerances, deformations and clearances | |
| Tracked Changes (Redline) - Unfired pressure vessels \x97 Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture... | |
| Tracked Changes (Redline) - Ventilation for buildings - Ductwork - Cleanliness of ventilation systems | |
| Tracked Changes (Redline) - Water quality \x97 Guidance standard on determining the degree of modification of river hydromorphology | |
| Tracked Changes (Redline) - Winter maintenance equipment \x97 Spreading and spraying machines Part 1: General requirements and definitions | |
| Tracked Changes (Redline) \x96 Sports- and recreational facilities \x97 Ropes courses Part 2: Operation requirements | |
| Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements | |
| Transportable gas cylinders \x97 Cylinder bundles \x97 Periodic inspection and testing | |
| Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15... | |
| Unfired pressure vessels \x97 Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15... | |
| Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/vent ilated rooms to evaluate thermal and acoustic conditions | |
| Ventilation for buildings - Determining performance criteria for residential ventilation systems | |
| Ventilation for buildings - Ducts and ductwork components, leakage classification and testing | |
| Ventilation for buildings - Ductwork - Cleanliness of ventilation systems | |
| Ventilation for buildings - Fire dampers | |
| Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale | |
| Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements | |
| Vitreous and porcelain enamels - Terminology | |
| Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing | |
| Water quality - Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water | |
| Water quality - Guidance standard on determining the degree of modification of river hydromorphology | |
| Water quality \x97 Guidance on the estimation of fish abundance with mobile hydroacoustic methods | |
| Winter maintenance equipment - Snow ploughs Part 1: Product description and requirements | |
| Winter maintenance equipment - Snow ploughs Part 2: Testing criteria and their requirements | |
| Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity | |
| Winter maintenance equipment - Spreading machines (gritting machines) Part 1: General requirements and definitions for spreading machines | |
| Winter maintenance equipment \x97 Spreading and spraying machines Part 2: Requirements for distribution and their test |
| << Prev | Next >> |