Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
280
290
300
310
320
330
331
332
333
334
335
336
337
338
339
340
341
342
343
350
360
370
380
390
400
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| A framework for digital preservation of cinematographic works \x97 The Cinema Preservation Package | |
| Accessible systems for living independently - Requirements and recommendations | |
| Acoustic properties of building elements and of buildings \x97 Laboratory measurement of the impact sound insulation of stairs and stair isolating elements | |
| Adhesives - Test Methods for Floor Coverings and Wall Coverings - Determination of Dimensional Changes of a Linoleum Floor Covering in Contact with an Adhesive | |
| Adhesives for floor coverings - Preparation of adhesive application - Test methods for the determination of corresponding humidity of mineral substrates | |
| Agricultural and forestry machinery - Environmental requirements for dusters | |
| Agricultural and forestry machinery - Installation of lighting and light signalling devices on mounted implements | |
| Agricultural and forestry machinery \x97 Environmental requirements for granule applicator of Plant Protection Products | |
| Agricultural Machinery - Trailers with Tipping Body - Safety | |
| Algae and algae products - Measurement for renewable algal raw material for energy and non-energy applications | |
| Algae and algae products - Methods of sampling and analysis - Determination of chlorophyll a content | |
| Algae and algae products - Methods of sampling and analysis - Determination of total lipids content using the Ryckebosch-Foubert method | |
| Algae and algae products - Sampling - Guidelines for the definition of sampling programs and sampling protocols | |
| Aluminium and Aluminium Alloys - Designation of Unalloyed and Alloyed Aluminium Ingots for Remelting, Master Alloys and Castings Part 1: Numerical Designation System | |
| Aluminium and Aluminium Alloys - Designation of Unalloyed and Alloyed Aluminium Ingots for Remelting, Master Alloys and Castings Part 2: Chemical Symbol Based Designation System | |
| Aluminium and Aluminium Alloys - Designation of Unalloyed and Alloyed Aluminium Ingots for Remelting, Master Alloys and Castings Part 3: Writing Rules for Chemical Composition | |
| Anaesthetic Reservoir Bags | |
| Animal feeding stuff: Methods of sampling and analysis - Determination of intact glucosinolates in feed materials and compound feed by LC-MS/MS | |
| Animal feeding stuffs - Methods of sampling and analysis - Determination of pyrrolizidine alkaloids in animal feeding stuff by LC-MS/MS | |
| Animal health diagnostic analyses - Electronic data exchange in laboratory analysis | |
| Antimicrobial wound dressings - Requirements and test method | |
| Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing Part 1: Barbecues burning solid fuels \x97 Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing Part 3: Firelighters for igniting solid fuels for use in barbecue appliances Requirements and test methods | |
| Assistance dogs Part 1: Vocabulary | |
| Assistance dogs Part 2: Dog lifetime welfare | |
| Assistance dogs Part 4: Pre-training, training and tasks | |
| Assistance dogs Part 6: Accessibility and Universal Access | |
| Automotive fuels - Determination of content of butoxy-benzene in middle distillates - Gas chromatographic method using a flame ionization detector (GC-FID) | |
| Automotive fuels - Determination of hydrocarbon group types and select hydrocarbon and oxygenate compounds - Gas chromatography with vacuum ultraviolet absorption spectroscopy (GC-VUV) method | |
| Bio-based products \x97 Life cycle assessment \x97 Additional requirements and guidelines for comparing the life cycles of bio-based products with their fossil-based equivalents | |
| Biotechnology - Large-Scale Process and Production - Control Procedures for Raw Materials | |
| Blank Detail Specification: Connectors for Optical Fibres and Cables Environmental Category I | |
| Body-Piercing Post Assemblies - Reference Test Method for Determination of Nickel Content by Flame Atomic Absorption Spectrometry | |
| Building Hardware - Emergency Exit Devices Operated by a Lever Handle or Push Pad - Requirements and Test Methods | |
| Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification | |
| Candle accessories - Specification for fire safety and product safety labels | |
| Candle Accessories \x97 Specification for fire safety and product safety labels | |
| Carrier cycles Part 1: Terms and definitions | |
| Carrier Cycles Part 2: Lightweight single track carrier cycles - Mechanical aspects | |
| Carrier Cycles Part 3: Lightweight multi track carrier cycles - Mechanical aspects | |
| Carrier Cycles Part 4: Heavyweight carrier cycles \x97 Mechanical and functional aspects | |
| Carrier cycles Part 5: Electrical aspects | |
| Carrier Cycles Part 6: Passenger transport | |
| Carrier cycles Part 7: Cargo trailers | |
| Central heating boilers - Specification for indirectly heated unvented (closed) pressurized buffer tanks - Requirements, testing and marking | |
| Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions | |
| Characteristic Values for Welded Thermoplastics Constructions - Determination of Allowable Stresses and Moduli for Design of Thermoplastics Equipment | |
| Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of sporicidal activity against Clostridioides difficile on non-porous surfaces with mechanical action employing wipes in the medical area (4-field... | |
| Chemical disinfectants and antiseptics \x97 Chemical textile disinfection for the domestic area \x97 Test method and requirements (phase 2, step 2) | |
| Chemical disinfectants and antiseptics \x97 Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the food, industrial, domestic and institutional area... | |
| Chemical disinfectants and antiseptics \x97 Quantitative suspension test for the evaluation of virucidal activity in the food, industrial, domestic and institutional area \x97 Test method and requirements (Phase 2/Step 1)... | |
| Chemical used for treatment of water intended for human consumption - Antifouling for membranes - Sulphamic acid | |
| Chimneys - Clay/Ceramic Flue Blocks for Single Wall Chimneys - Requirements and Test Methods | |
| Chimneys - Components - Concrete flue blocks | |
| Chimneys - Components - Concrete flue liners | |
| Chimneys - Metal Chimneys - Test Methods | |
| Chimneys Components Concrete flue blocks | |
| Chimneys Components Concrete flue liners | |
| Chimneys Requirements for metal chimneys Part 1: System chimney products | |
| Chimneys Requirements for metal chimneys Part 2: Metal liners and connecting flue pipes | |
| Circular design of fishing gear and aquaculture equipment Consolidated version part 1-6 | |
| Circular design of fishing gear and aquaculture equipment Part 1: General requirements and guidance | |
| Circular design of fishing gear and aquaculture equipment Part 2: User manuals and labelling | |
| Circular design of fishing gear and aquaculture equipment Part 3: Technical requirements and guidelines | |
| Circular design of fishing gear and aquaculture equipment Part 4: Environmental and circularity requirements and guidelines | |
| Circular design of fishing gear and aquaculture equipment Part 5: Circular business models | |
| Circular design of fishing gear and aquaculture equipment Part 6: Requirements and guidelines for digitalization of information of components of fishing gear and aquaculture equipment | |
| Commercial dishwashing machines - Hygiene requirements and testing | |
| Common security requirements for radio equipment Part 1: Internet connected radio equipment | |
| Common security requirements for radio equipment Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment | |
| Common security requirements for radio equipment Part 3: Internet connected radio equipment processing virtual money or monetary value | |
| Components for BAC control loop - Sensors Part 1: Room temperature sensors | |
| Connector Sets for Optical Fibres and Cables Type OCCA-BU | |
| Connector Sets for Optical Fibres and Cables Type OCCA-PC | |
| Conservation of cultural heritage - Determination of water absorption by contact sponge method | |
| Conservation of Cultural Heritage - Specifications for the management of moveable cultural heritage collection | |
| Conservation of cultural heritage \x97 Desalination of porous inorganic materials by poultices | |
| Conservation of Cultural Heritage \x97 Waterlogged archaeological wood \x97 Characterization of waterlogged archaeological wood to support decision-making processes for its preservation | |
| Construction products: Assessment of release of dangerous substances - Determination of biocide residues using liquid chromatography with mass spectrometric detection (LC-MS/MS) | |
| Construction products: Assessment of release of dangerous substances - Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX) - Gas chromatographic method... | |
| Cryogenic Vessels - Gas/Material Compatibility Part 1: Oxygen Compatibility | |
| Cryogenic Vessels - Gas/Material Compatibility | |
| Cultural heritage \x97 Assessment and monitoring of archaeological deposits for preservation in situ | |
| Curtain walling - Environmental product declarations - Product category rules for curtain walling | |
| Design-for-recycling guidelines for plastic construction products \x97 Insulation products of expanded polystyrene (EPS) | |
| Determination of explosion limits of gases and vapours | |
| Devices for in-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis | |
| Devices for in-situ generation of biocides - Ozone | |
| District heating pipes - Factory made flexible pipe systems with a lower temperature profile Part 1: Classification, general requirements and test methods | |
| District heating pipes - Factory made flexible pipe systems with a lower temperature profile Part 2: Requirements and test methods for bonded systems with plastic service pipes | |
| District heating pipes - Factory made flexible pipe systems with a lower temperature profile Part 3: Requirements and test methods for non bonded systems with plastic service pipes | |
| Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods | |
| Diving equipment \x97 Buoyancy compensators \x97 Functional and safety requirements, test methods | |
| Ductile iron pipes - Push-in joints for ductile iron pipe systems - Resistance against root penetration - Requirements and test methods | |
| Dynamic mixers and agitators - Definitions and hydraulic characterizations | |
| Earthworks - Chemical tests Part 1: Determination of loss on ignition | |
| EDI - Message - Syntax and Service Report Message (CONTRL) | |
| Electrically Propelled Road Vehicles - Measurement of Road Operating Ability - Part 2: Thermal Electric Hybrid Vehicles | |
| Electrically Propelled Road Vehicles - Measurement of Road Operating Ability Part 1: Pure Electric Vehicles | |
| Electromagnetic pulse welding Part 1: Welding knowledge, terminology and vocabulary | |
| Electromagnetic pulse welding Part 2: Design of welded joints | |
| Electromagnetic pulse welding Part 3: Qualification of welding operators and weld setters | |
| Electromagnetic pulse welding Part 4: Specification and qualification of welding procedures | |
| Electromagnetic pulse welding Part 5: Quality and inspection requirements | |
| Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences within a single e-cigarette | |
| Energy efficiency classes for technical insulation systems - Calculation method and applications | |
| Energy Performance Contracts \x97 Minimum requirements | |
| Entertainment technology - Codes of Practice Part 5: Lifting and motion operations in the event industry | |
| Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames | |
| Environmental solid matrices - Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography | |
| Equipment for vine cultivation and wine making \x97 Safety \x97 Must and grape harvest pumps | |
| Event structures \x97 Safety requirements | |
| Fertilizers - Description of the forms of the physical unit | |
| Fertilizers, liming materials and inhibitors - Determination of the quantity (declared by mass or volume) | |
| Fire Blankets | |
| Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation | |
| Firefighting and Rescue Service Vehicles - Part 1: Nomenclature and Designation | |
| Firefighting and Rescue Service Vehicles - Part 2: Common Requirements - Safety and Performance | |
| Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | |
| Firefighting and rescue service vehicles Part 2: Common requirements - Safety and performance | |
| Firefighting and rescue service vehicles Part 3: Permanently installed equipment Safety and performance | |
| Flexible Sheets for Waterprofing - Determination of Resistance to Ozone - Plastic and Rubber Sheets for Roof Waterprofing | |
| Flexible Sheets for Waterproofing - Determination of Length, Width and Straightness - Part 1: Bitumen Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Length, Width, Straightness and Flatness - Part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible sheets for waterproofing - Determination of the resistance to wind load of roof build-up system with bonded waterproofing systems | |
| Flexible Sheets for Waterproofing - Determination of Thickness and Mass per Unit Area - Part 1: Bitumen Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Thickness and Mass Per Unit Area - Part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Visible Defects - Part 1: Bitumen Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Determination of Visible Defects - Part 2: Plastic and Rubber Sheets for Roof Waterproofing | |
| Flexible Sheets for Waterproofing - Plastic and Rubber Sheets for Roof Waterproofing - Methods for Exposure to Liquid Chemicals, Including Water | |
| Flexible sheets for waterproofing - Plastics recycling and recycled plastics - Plastic waterproofing sheets | |
| Flexible sheets for waterproofing \x97 Underlays for discontinuous roof coverings \x97 Artificial ageing procedure | |
| Flexible sheets for waterproofing \x97 Underlays for discontinuous roof coverings and walls \x97 Instructions for mounting and fixing for reaction to fire testing | |
| Food authenticity - Determination of C and/or N isotope ratios in food by Elemental Analyser - Isotope Ratio Mass Spectrometry (EA-IRMS) | |
| Food authenticity - Determination of the d13C value of mono- (fructose and glucose), di-, and trisaccharides in honey by liquid chromatography-isoto pe ratio mass spectrometry (LC-IRMS) | |
| Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by \xb9H-qNMR | |
| Food authenticity - DNA barcoding of bivalves and products derived from bivalves using a defined mitochondrial 16S rRNA gene segment | |
| Food authenticity - DNA barcoding of meat derived from mammals and birds using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments | |
| Food authenticity - Food authenticity and fraud - Concepts, terms and definitions | |
| Food authenticity - Quantitation of equine DNA relative to mammalian DNA in raw beef (meat) | |
| Food authenticity - Quantitation of roe deer DNA relative to mammalian DNA in meat and meat products by real-time PCR | |
| Food authenticity \x97 Determination of 16-O-Methylcafestol content of green and roasted coffee \x97 HPLC-method | |
| Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements | |
| Foodstuff \x97 Quick Method for the Analysis of Multiple Highly Polar Pesticides and their Metabolites in Foodstuff Involving Extraction with Acidified Methanol and Measurement by LC- or IC-MS/MS (QuPPe-Method) | |
| Foodstuffs - Detection of Irradiated Food Containing Bone - Method by ESR Spectroscopy | |
| Foodstuffs - Detection of Irradiated Food Containing Cellulose - Method by ESR Spectroscopy | |
| Foodstuffs - Detection of Irradiated Food Containing Fat - Gas Chromatographic Analysis of Hydrocarbons | |
| Foodstuffs - Detection of Irradiated Food Containing Fat - Gas Chromatographic/Mass Spectrometric Analysis of 2-Alkylcyclobutanone s | |
| Foodstuffs - Determination of elements and their chemical species -Determination of Ag, As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Tl, U and Zn in foodstuffs by inductively... | |
| Foodstuffs - Minimum performance requirements for quantitative measurement of the food allergens milk, egg, peanut, hazelnut, almond, walnut, cashew, pecan nut, brazil nut, pistachio nut, macadamia nut, wheat, lupine, sesame,... | |
| Foodstuffs - Thermoluminescence Detection of Irradiated Food from Which Silicate Minerals Can Be Isolated | |
| Footwear Manufacturing Machines - Footwear Moulding Machines - Safety Requirements | |
| Forestry machinery \x97 Requirements for sling gear and deflection pulleys for forestal hauling operations | |
| Foundational Body of Knowledge for the ICT Profession (ICT BoK) Part 1: Body of Knowledge | |
| Furniture - Circularity - Evaluation method for dis/re-assembly capability | |
| Gas infrastructure - Injection stations Part 1: General requirements | |
| Gas infrastructure - Injection stations Part 2: Specific requirements regarding the injection of biomethane | |
| Gas infrastructure - Injection stations Part 3: Specific requirements regarding the injection of hydrogen | |
| Gas infrastructure \x97 Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements | |
| Gas Supply - Gas Pipework in Buildings - Maximun Operating Pressure Less Than or Equal to 5 Bar - Functional Recommendations | |
| Gas Supply - Natural Gas Measuring Stations - Functional Requirements | |
| Generic Specification Connectors Sets for Optical Fibres and Cables Part 1: Requirements, Test Methods and Qualification Approval Procedures | |
| Generic Specification for Optical Fibre Cables | |
| Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test | |
| Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools | |
| Glass In Building - Heat Strengthened Soda Lime Silicate Glass - Part 1: Definition and Description | |
| Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool | |
| Glass in building \x97 Folio interlayers for the manufacturing of laminated glass | |
| Glass in building \x97 Reaction to fire \x97 Mounting and fixing instructions for glass products and extended application of test results | |
| Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions | |
| Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm) | |
| Grease Separators - Part 2: Selection of Nominal Size, Installation, Operation and Maintenance | |
| Grease separators Part 1: Principles of design, performance and testing, marking and quality control | |
| Guidelines on a sectoral cybersecurity assessment | |
| Hardware for furniture - Star bases for seating - Requirements and test methods | |
| Hardware for furniture \x97 Test and evaluation methods for the corrosion resistance of furniture fittings | |
| Hardware for furniture \x97 Test methods for strength and overload tests of connectors for furniture constructed from panel material | |
| Harmonized system of quality assessment for electronic components Blank detail specification Connector for optical fibres and cables Environmental category II | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification Connectors for Optical Fibres and Cables for Military Use Environmental Category VI | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fibre Optic Branching Devices - Type: Non Wavelength Selective Transmissive Star for Telecommunication Application | |
| Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fibre Optic Branching Devices - Type: Wavelength Selective Transmissive Star for Telecommunication Application | |
| Harmonized System of Quality Assessment for Electronic Components Connector Sets for Optical Fibres and Cables - Type MPO | |
| Harmonized System of Quality Assessment for Electronic Components Generic Specification Fibre Optic Branching Devices | |
| Harmonized System of Quality Assessment for Electronic Components Generic Specification: Fibre Optic Attenuators | |
| Harmonized system of quality assessment for electronic components Sectional specification: Connector sets for optical fibres and cables - Type CF08 | |
| Harmonized system of quality assessment for electronic components Sectional specification: Connector sets for optical fibres and cables - Type LSB | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type LSC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type LSH | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type MF | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type RCC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSA | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSF | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables Type MT | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables Types FC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specifications: Connector Sets for Optical Fibres and Cables - Type SC | |
| Harmonized System of Quality Assessment for Electronic Components Sectional Specifications: Connector Sets for Optical Fibres and Cables Type MSC | |
| Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Types F-SMA | |
| Health informatics - Categorial structure for classifications and coding systems of surgical procedures | |
| Heating systems and water-based cooling systems in buildings \x97 Design for water-based cooling systems | |
| High Efficiency Air Filters (HEPA and ULPA) - Part 1: Classification, Performance Testing, Marking | |
| High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics | |
| High Efficiency Air Filters (HEPA and ULPA) - Part 3: Testing Flat Sheet Filter Media | |
| High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 4: Determining Leakage of Filter Element (Scan Method) | |
| High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 5: Determining the Efficiency of Filter Element | |
| High pressure water jet machines - Safety requirements Part 1: Machines | |
| High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors | |
| Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing | |
| Hydraulic platforms (HPs) for fire fighting and rescue services Safety requirements and testing | |
| Hydrometry - Minimum performance requirements and test procedures for water monitoring equipment. Devices for the determination of flow Part 2: Closed conduit instrumentation | |
| Hydrometry \x97 Minimum performance requirements and test procedures for water monitoring equipment \x97 Devices for the determination of flow Part 1: Open channel instrumentation | |
| Hyperloop Systems Aspects - Reference Architecture | |
| Hyperloop Transport Services | |
| Industrial decarbonization \x97 Requirements and guidelines for sectoral transition plans | |
| Industrial valves - Functional safety of safety-related automated valves | |
| Inland Navigation Vessels - Wheelhouse and Control Position - Types, Safety Requirements | |
| Inorganic fertilizers - Determination of nitrogen content in IBDU (isobutylidenediurea ) and CDU (crotonylidenediurea ) | |
| Inorganic fertilizers \x97 Determination of nutrient polymers nitrogen in the presence of other nitrogenous forms | |
| Installation of post-tensioning kits for prestressing of structures Part 1: Competence of personnel | |
| Installation of post-tensioning kits for prestressing of structures Part 2: Assessment of personnel | |
| Intelligent transport systems - eSafety - eCall additional data concept for equipment limitations | |
| Intelligent transport systems - eSafety - eCall HLAP in hybrid circuit switched/packet switched network environments | |
| Laryngoscopes for Tracheal Intubation - Particular Requirements | |
| Leather - Description, labelling and marking of leather goods | |
| Leather - Standard data for the calculation of leather density | |
| Leather \x97 Chemicals \x97 Quality control | |
| Life cycle cost (LCC) and life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems | |
| Lighting Applications - Emergency Lighting | |
| Liming materials - Determination of physical and chemical properties and specific contaminants | |
| Machine Readable Cards - Health Care Applications - Numbering System and Registration Procedure for Issuer Identifiers | |
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | |
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | |
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems | |
| Machines for underground mines Safety requirements for hydraulic powered roof supports Part 3: Hydraulic control systems | |
| Maintenance - Risk control processes of energies and fluids risks in maintenance activities - Guidance | |
| Maintenance \x97 Maintenance engineering \x97 Requirements | |
| Maintenance management and functions | |
| Matches - Performance Requirements, Safety and Classification | |
| Medical Vehicles and Their Equipment - Road Ambulances | |
| Mobile fire extinguishers - Part 1: Characteristics, performance and test methods | |
| Mobile fire extinguishers Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply... | |
| Mobile fire extinguishers Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1 | |
| Mobile Fire Extinguishers | |
| Mountaineering equipment - Load sharing devices - Safety requirements and test methods | |
| Mountaineering equipment \x97 Helmets for ski mountaineers \x97 Safety requirements and test methods | |
| Natural gas fuelling stations \x97 LNG unloading connector | |
| Natural gas fuelling stations \x97 LNG unloading stop system | |
| Natural gas vehicles - Requirements for liquefied natural gas vehicle (LNGV) workshops and the management of liquefied natural gas (LNG) vehicles | |
| Natural gas vehicles \x97 LNG vehicle fuelling procedures | |
| Non-Destructive Testing - Leak Testing - Criteria for Method and Technique Selection | |
| Packaging \x97 Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers | |
| Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of aluminium in aqueous extracts | |
| Patient handling equipment used in ambulances Part 6: Powered chairs | |
| Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher | |
| Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair | |
| Patient handling equipment used in road ambulances - Part 5: Stretcher support | |
| Patient handling equipment used in road ambulances Part 1: General stretcher systems and patient handling equipment | |
| Patient handling equipment used in road ambulances Part 1: Specification for general stretcher systems and patient handling equipment | |
| Patient handling equipment used in road ambulances Part 2: Power assisted stretcher | |
| Patient handling equipment used in road ambulances Part 3: Heavy duty stretcher | |
| Performance and condition assessment for buildings and civil engineering works \x97 Framework for assessment within physical asset management | |
| Performance of wood adhesives exposed to high temperatures with regard to behaviour of load-bearing timber structures in fire \x97 Test method, evaluation and classification | |
| Personal data protection requirements for processing operations | |
| Personal Eye Protection - Sunglasses and Sunglare Filters for General Use | |
| Personal Protective Equipment Against Falls from a Height - List of Equivalent Terms | |
| Petrol fuel for small internal combustion engines - Requirements and test methods | |
| Plant biostimulants - Claims Part 1: General principles | |
| Plant biostimulants - Claims Part 2: Nutrient use efficiency resulting from the use of a plant biostimulant | |
| Plant biostimulants - Claims Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant | |
| Plant biostimulants - Claims Part 4: Determination of quality traits resulting from the use of a plant biostimulant | |
| Plant biostimulants - Claims Part 5: Determination of availability of confined nutrients in the soil or rhizosphere | |
| Plant biostimulants - Detection of Salmonella spp. | |
| Plant biostimulants - Detection of Shigella spp | |
| Plant biostimulants - Detection of Staphylococcus aureus | |
| Plant biostimulants - Detection of Vibrio spp. | |
| Plant biostimulants - Determination of Azospirillum spp. | |
| Plant biostimulants - Determination of Azotobacter spp. | |
| Plant biostimulants - Determination of dry matter | |
| Plant biostimulants - Determination of enterococci | |
| Plant biostimulants - Determination of Escherichia coli | |
| Plant biostimulants - Determination of inorganic arsenic | |
| Plant biostimulants - Determination of mycorrhizal fungi | |
| Plant biostimulants - Determination of phosphonates | |
| Plant biostimulants - Determination of Rhizobium spp. | |
| Plant biostimulants - Determination of specific elements Part 1: Digestion by aqua regia for subsequent determination of elements | |
| Plant biostimulants - Determination of specific elements Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn | |
| Plant biostimulants - Determination of specific elements Part 3: Determination of mercury | |
| Plant biostimulants - Determination of the pH for liquid microbial plant biostimulants/pH in microbial products - Determination of pH | |
| Plant biostimulants - Determination of the quantity (indicated by mass or volume) | |
| Plant biostimulants - Determination of the yeast and mould content | |
| Plant biostimulants - Preparation of sample for microbial analysis | |
| Plant biostimulants - Sampling and sample preparation Part 1: Sampling | |
| Plant biostimulants - Sampling and sample preparation Part 2: Sample preparation | |
| Plant biostimulants - Terminology | |
| Plant biostimulants \x97 Detection of Listeria monocytogenes | |
| Plant biostimulants \x97 Determination of chloride | |
| Plant biostimulants \x97 Determination of chromium(VI) | |
| Plant biostimulants \x97 Determination of microorganisms' concentration | |
| Plant biostimulants \x97 Determination of the anaerobic plate count | |
| Plastic piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Part 1: Specifications for pipes, fittings and the system | |
| Plastics - Agricultural plastic products - Installation, use, removal, sorting, collection, preparation for recycling and design for recycling guidelines | |
| Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision | |
| Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products Part 4: Poly(ethylene terephthalate) (PET) | |
| Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products Part 6: Polystyrene (PS) | |
| Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products Part 7: Acrylonitrile- butadiene-styrene (ABS) | |
| Plastics - Thermoset Moulding Compounds (SMC - BMC) - Determination of Compression Moulding Shrinkage | |
| Plastics \x97 Design for recycling of PVC based profiles for construction products | |
| Plastics \x97 Quality recommendations and basis for specifications for application of plastic recyclates in products Part 1: General aspects | |
| Plastics \x97 Quality recommendations and basis for specifications for application of plastic recyclates in products Part 2: Polyethylene (PE) | |
| Plastics \x97 Quality recommendations and basis for specifications for application of plastic recyclates in products Part 3: Polypropylene (PP) | |
| Plastics \x97 Quality recommendations and basis for specifications for application of plastic recyclates in products Part 5: Poly(vinyl chloride) (PVC) | |
| Plastics \x97 Recycled plastics \x97 Characterization of Acrylonitrile-Butadi ene-Styrene (ABS) recyclates | |
| Plastics \x97 Recycled plastics \x97 Classification of recycled plastics based on Data Quality Levels for use and (digital) trading | |
| Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Relative Flexural Creep Factor Following Exposure to a Chemical Environment | |
| Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Specification for road gullies | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) Part 1: Specifications for pipes, fittings and the system | |
| Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) | |
| Plastics piping systems for water supply with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) | |
| Postal Services - Parcel Delivery Environmental Footprint - Methodology for calculation and declaration of GHG emissions and air pollutants of parcel logistics delivery services | |
| Pressure Sensing Devices for Gas Burners and Gas Burning Appliances | |
| Privacy Information Management System per ISO/ IEC 27701 - Refinements in European context | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of the Coefficient of Thermal Expansion | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Infrared Analysis | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reference Concretes for Testing | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Tests to Measure the Suitability of Structural Bonding Agents for Application to Concrete Surface | |
| Products used for treatment of water intended for human consumption and swimming pool water - Glass beads and glass granulate | |
| Protective clothing - Protection against heat and flame - Requirements and test methods for garments with integrated smart textiles and non textile elements | |
| Protective helmets - Test methods - Shock absorption including measuring rotational kinematics | |
| Public procurement - Integrity and accountability - Requirements and guidance | |
| Railway applications - Acoustics - Measurement of source terms for environmental noise calculations | |
| Railway applications - Bolting of rail vehicles and components | |
| Railway applications - Braking - Definition of ETCS brake curve parameters for Gamma trains | |
| Railway applications - Ground based services - Coach hygiene requirements | |
| Railway applications \x97 Ground based services \x97 Exhaust treatment fluid (AUS 32) refilling equipment | |
| Railway applications \x97 Infrastructure \x97 Resilient element for floating slab system | |
| Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosive Atmospheres - Part 2: Group I Engines for Use in Underground Workings... | |
| Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1: Group II Engines for Use in Flammable Gas... | |
| Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 3: Group II Engines for Use in Flammable Dust... | |
| Reference Test Method for Release of Nickel from Products Intended to Come into Direct and Prolonged Contact with the Skin | |
| Refrigerating Systems and Heat Pumps - System Flow Diagrams and Piping and Instrument Diagrams - Layout and Symbols | |
| Requirements for professional profiles related to personal data processing and protection | |
| Resilient and Textile Floor Coverings - Assessment of Static Electrical Propensity | |
| Resilient Floor Coverings - Determination of the Effect of Loaded Heavy Duty Castors | |
| Resilient Floor Coverings - Specification for Homogeneous and Heterogeneous Smooth Rubber Floor Coverings with Foam Backing | |
| Resilient Floor Coverings - Specification for Homogeneous and Heterogeneous Smooth Rubber Floor Coverings | |
| Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions | |
| Respiratory Protective Devices - Half Masks without Inhalation Valves and with Separable Filters to Protect Against Gases or Gases and Particles Only - Requirements, Testing, Marking | |
| Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking | |
| Respiratory Protective Devices - Light Duty Construction Compressed Air Line Breathing Apparatus Incorporating a Helmet or a Hood - Requirements, Testing, Marking | |
| Road Marking Materials - Performed Road Markings | |
| Road Marking Materials - Road Trials | |
| Road Traffic Noise Reducing Devices - Non-Acoustic Performance - Part 1: Mechanical Performance and Stability Requirements | |
| Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field... | |
| Road Traffic Noise Reducing Devices - Test Method for Determining the Acoustic Performance Part 1: Intrinsic Characteristics of Sound Absorption | |
| Road Traffic Noise Reducing Devices - Test Method for Determining the Acoustic Performance Part 2: Intrinsic Characteristics of Airborne Sound Insulation | |
| Road Traffic Noise Reducing Devices - Test Method for Determining the Acoustic Performance Part 3: Normalized Traffic Noise Spectrum | |
| Road traffic noise reducing devices \x96 Test method for determining the acoustic performance Part 6: Intrinsic characteristics \x96 In situ values of airborne sound insulation under direct sound field conditions... | |
| Road traffic noise reducing devices \x97 Non-acoustic performance Part 3: Reaction to fire \x97 Burning behaviour of noise reducing devices and classification | |
| Road traffic noise reducing devices \x97 Test method for determining the acoustic performance Part 4: Intrinsic characteristics \x97 In situ values of sound diffraction | |
| Road traffic noise reducing devices \x97 Test method for determining the acoustic performance Part 5: Intrinsic characteristics \x97 In situ values of sound reflection under direct sound field conditions | |
| Road traffic noise reducing devices Non-acoustic performance Part 2: General safety and environmental requirements | |
| Road vehicles \x97 Rechargeable batteries with internal energy storage \x97 Performance and durability of alkali-Ion (Li-Ion, Na-Ion), Pb, NiMH and combined chemistries EV modules and batteries | |
| Road vehicles \x97 Rechargeable batteries with internal energy storage \x97 Steps, conditions and protocols for the safe repair and re-use and preparation for repurposing of modules and batteries designed for... | |
| Rubber Hose Assemblies for Oil Suction and Discharge Services - Specification for the Assemblies | |
| Safety and control devices for burners and appliances burning gaseous and/or liquid fuels \x97 Pressure sensing devices for gas burners and gas burning appliances | |
| Safety of Machinery - Integral Lighting of Machines | |
| Safety of woodworking machines - Band sawing machines Part 1: Table band saws and band re-saws | |
| Safety of woodworking machines - Band sawing machines Part 2: Log sawing machines | |
| Safety of Woodworking Machines - Band Sawing Machines | |
| Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines | |
| Safety of Woodworking Machines - Circular Sawing Machines - Part 1: Circular Saw Benches (with and without Sliding Table) and Dimension Saws | |
| Safety of woodworking machines Circular sawing machines Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines | |
| Safety of woodworking machines Circular sawing machines Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | |
| Safety of woodworking machines Circular sawing machines Part 12: Pendulum cross-cut sawing machines | |
| Safety Requirements on Suspended Access Equipment - Design Calculations, Stability Criteria, Construction - Tests | |
| Sanitary tapware - Measurement of functional performance of taps and showers | |
| Security Evaluation Standard for IoT Platforms (SESIP) \x97 An effective methodology for applying cybersecurity assessment and re-use for connected products | |
| Soil improvers and growing media - Determination of temperature-time profiles during composting and digestion | |
| Specifications for Stretchers and Other Patient Handling Equipment Used in Road Ambulances | |
| Stationary source emissions \x97 Requirements on proficiency testing schemes for emission measurements | |
| Surface Active Agents - Determination of Wetting Power by Immersion | |
| Surface Active Agents - Fatty Alkyl Dimethyl Amine Oxides - Determination of the Amine Oxide Content | |
| Sustainability of construction works - Environmental product declarations - Horizontal rules for business-to-consumer communication | |
| Sustainability of construction works - Evaluation of the potential for sustainable refurbishment of buildings | |
| Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus | |
| Textile Floor Coverings - Determination of Resistance to Damage at Cut Edges Using the Modified Vettermann Drum Test | |
| Textile Floor Coverings - Determination of Wool Fibre Integrity Using an Abrasion Machine | |
| Textiles - Fabrics - Determination of Width and Length | |
| Textiles and textile products - Organic fluorine Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography | |
| Textiles and textile products - Organic fluorine Part 2: Determination of volatile compounds by extraction method using gas chromatography | |
| Thermal insulation and energy economy in buildings \x97 Method to determine the durability of bondings with adhesive tapes and adhesive masses for the establishment of airtight layers under climatic conditions... | |
| Thermal insulation products \x97 Assessment of the susceptibility to mould growth \x97 Laboratory test method | |
| Thermal performance of buildings - In situ testing of completed buildings Part 1: Data collection for aggregate heat loss test | |
| Thermal performance of buildings \x97 In situ testing of building test structures Part 1: Data collection for aggregate heat loss test | |
| Thermal performance of buildings \x97 In situ testing of building test structures Part 2: Steady-state data analysis for aggregate heat loss test | |
| Thermal performance of buildings \x97 In situ testing of completed buildings Part 2: Steady-state data analysis for aggregate heat loss test | |
| Thermal road vehicles - Temperature-controll ed systems using flammable refrigerants for transport of goods - Requirements and risk analysis process | |
| Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment | |
| Tracheal Tubes and Connectors | |
| Tracked Changes (Redline) - Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods | |
| Tracked Changes (Redline) - Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test... | |
| Tracked Changes (Redline) - Appliances, solid fuels and firelighters for barbecuing \x97 Part 2: Barbecue charcoal and barbecue charcoal briquettes \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Appliances, solid fuels and firelighters for barbecuing \x97 Part 4: Single use barbecues burning solid fuels \x97 Requirements and test methods | |
| Tracked Changes (Redline) - Conservation of Cultural Heritage - Specifications for the management of moveable cultural heritage collection | |
| Tracked Changes (Redline) - Fire blankets | |
| Tracked Changes (Redline) - Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | |
| Tracked Changes (Redline) - Flexible sheets for waterproofing - Determination of thickness and mass per unit area Part 2: Plastics and rubber sheets for roof waterproofing | |
| Tracked Changes (Redline) - Flexible sheets for waterproofing \x97 Determination of length, width and straightness \x97 Part 1: Bitumen sheets for roof waterproofing | |
| Tracked Changes (Redline) - Foodstuff - Detection of irradiated foodstuff containing cellulose by ESR spectroscopy | |
| Tracked Changes (Redline) - Gas infrastructure - Gas measuring systems - Functional requirements | |
| Tracked Changes (Redline) - High efficiency air filters (EPA, HEPA and ULPA) Part 1: Classification, performance testing, marking | |
| Tracked Changes (Redline) - Lighting applications \x97 Emergency lighting for buildings | |
| Tracked Changes (Redline) - Patient handling equipment used in ambulances - Part 2: Power assisted stretcher | |
| Tracked Changes (Redline) - Plant biostimulants - Claims - Part 4: Determination of quality traits resulting from the use of a plant biostimulant | |
| TRACKED CHANGES (REDLINE) - Plant biostimulants - Claims - Part 5: Determination of availability of confined nutrients in the soil or rhizosphere | |
| Tracked Changes (Redline) - Plant biostimulants - Detection of Salmonella spp. | |
| Tracked Changes (Redline) - Plant biostimulants - Detection of Shigella spp | |
| Tracked Changes (Redline) - Plant biostimulants - Detection of Staphylococcus aureus | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of Azospirillum spp. | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of Azotobacter spp. | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of chromium(VI) | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of dry matter | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of inorganic arsenic | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of microorganisms' concentration | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of mycorrhizal fungi | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of phosphonates | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of Rhizobium spp. | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of specific elements - Part 2: Determination of total content of Cd, Pb, Ni, As, Cr, Cu and Zn | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of specific elements - Part 3: Determination of mercury | |
| Tracked Changes (Redline) - Plant biostimulants - Determination of the pH for liquid microbial plant biostimulants/pH in microbial products - Determination of pH | |
| Tracked Changes (Redline) - Plant biostimulants - Preparation of sample for microbial analysis | |
| Tracked Changes (Redline) - Plant biostimulants - Sampling and sample preparation - Part 1: Sampling | |
| Tracked Changes (Redline) - Plant biostimulants - Sampling and sample preparation - Part 2: Sample preparation | |
| Tracked Changes (Redline) - Plant biostimulants - Terminology | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Claims \x97 Part 1: General principles | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Claims \x97 Part 2: Nutrient use efficiency resulting from the use of a plant biostimulant | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Claims \x97 Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Detection of Listeria monocytogenes | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Detection of Vibrio spp. | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Determination of chloride | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Determination of enterococci | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Determination of Escherichia coli | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Determination of specific elements \x97 Part 1: Digestion by aqua regia for subsequent determination of elements | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Determination of the quantity (indicated by mass or volume) | |
| Tracked Changes (Redline) - Plant biostimulants \x97 Determination of the yeast and mould content | |
| Tracked Changes (Redline) - Plastics piping systems for nonpressure underground drainage and sewerage - Polypropylene (PP) Part 1: Specifications for pipes, fittings and the system | |
| Tracked Changes (Redline) - Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing | |
| Tracked Changes (Redline) - Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come... | |
| Tracked Changes (Redline) - Resilient and laminate floor coverings \x97 Assessment of static electrical propensity | |
| Tracked Changes (Redline) - Road traffic noise reducing devices - Non-acoustic performance - Part 1: Methods of determination of the mechanical and stability characteristics | |
| Tracked Changes (Redline) - Road traffic noise reducing devices - Non-acoustic performance - Part 2: Methods of determination of the general safety and environmental characteristics | |
| Tracked Changes (Redline) - Road traffic noise reducing devices - Test method for determining the acoustic performance Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions... | |
| Tracked Changes (Redline) - Road traffic noise reducing devices \x96 Test method for determining the acoustic performance Part 6: Intrinsic characteristics \x96 In situ values of airborne sound insulation under... | |
| Tracked Changes (Redline) - Road traffic noise reducing devices \x97 Test method for determining the acoustic performance Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions | |
| Tracked Changes (Redline) - Rubber hose assemblies for oil suction and discharge services \x97 Specification for the assemblies | |
| Tracked Changes (Redline) - Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances | |
| Tracked Changes (Redline) - Safety requirements for suspended access equipment \x97 Design calculations, stability criteria, construction \x97 Examinations and tests | |
| Tracked Changes (Redline) - Textiles and textile products - Per- and polyfluoroalkyl substances (PFAS) Part 1: Analysis of an alkaline extract using liquid chromatography and tandem mass spectrometry | |
| Transportable Gas Cylinders (Excluding LPG) - Procedures for Change of Gas Service | |
| Transportable Gas Cylinders - Acetylene Cylinders - Basic Requirements and Definitions | |
| Transportable Gas Cylinders - Filling Conditions for Single Acetylene Cylinders | |
| Transportable Gas Cylinders - Periodic Inspection and Testing of Seamless Aluminium Alloy Gas Cylinders | |
| Transportable Gas Cylinders - Periodic Inspection and Testing of Welded Carbon Steel Gas Cylinders | |
| Value Management - Function Analysis: Basic characteristics, requirements and guidance for implementation | |
| Valves and fittings for buildings and devices to prevent pollution by backflow of potable water \x97 Polymer parts and housings under internal pressure and without external loads | |
| Vapour products - Vaping regime for products intended to be used for direct to lung inhalation | |
| Water quality - Sampling, capture and preservation of environmental DNA from water | |
| Water quality \x97 Assessment of damage to fish passing through pumping stations and hydropower plants \x97 Methods based on live fish passage survival test and blade strike model | |
| Water quality \x97 Determination of selected per- and polyfluoroalkyl substances in drinking water \x97 Method using liquid chromatography/ tandem-mass spectrometry (LC-MS/MS) | |
| Water quality \x97 Guidance standard on a strategic approach to river restoration | |
| Water quality \x97 Spectrophotometric determination of chlorophyll-a content by ethanol extraction for the routine monitoring of water quality | |
| Welding - Multilingual List of Terms for Welding and Related Processes | |
| Welding and allied processes - Gas welding equipment - Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment | |
| Wood-based panels \x97 Determination of free melamine applying extraction and high-performance liquid chromatography (HPLC) with ultraviolet detection | |
| Zinc and Zinc Alloys - Alloys for Foundry Purposes Ingot and Liquid |
| << Prev | Next >> |