Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
270
280
290
300
310
320
330
331
332
333
334
335
336
337
338
339
340
341
342
350
360
370
380
390
400
450
500
550
600
650
700
1000
1500
1620
| Product Name | Notes |
|---|---|
| Accessibility and usability of the built environment \x97 Functional requirements | |
| Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading | |
| Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Dispersability | |
| Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Tack Measurement for Pressure Sensitive Adhesives - Determination of Rolling Ball Tack | |
| Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Tack Measurement for Pressure-Sensitive Adhesives - Determination of Loop Tack | |
| Agricultural machinery \x97 Self-propelled agricultural and forestry vehicles \x97 Requirements for braking | |
| Algae and algae products - Identification of the biomass of microalgae, macroalgae, cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or molecular methods | |
| Algae and algae products - Methods for the determination of productivity of algae growth sites | |
| Algae and algae products - Methods of sampling and analysis - Sample treatment | |
| Algae and algae products \x96 Terms and definitions | |
| Aluminium and Aluminium Alloys - Castings - Chemical Composition and Mechanical Properties | |
| Aluminium and Aluminium Alloys - Drawing Stock Part 1: General Requirements and Technical Conditions for Inspection and Delivery | |
| Aluminium and Aluminium Alloys - Drawing Stock Part 2: Specific Requirements for Electrical Applications | |
| Aluminium and Aluminium Alloys - Drawing Stock Part 3: Specific Requirements for Mechanical Uses (Excluding Welding) | |
| Aluminium and Aluminium Alloys - Drawing Stock Part 4: Specific Requirements for Welding Applications | |
| Aluminium and aluminium alloys \x96 Castings \x96 Chemical composition and mechanical properties | |
| Ambient air \x96 Standard method for the determination of the concentration of ammonia using diffusive samplers | |
| Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD) | |
| Animal feeding stuffs \x97 Methods of sampling and analysis \x97 Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC) | |
| Animal Feeding stuffs \x97 Methods of sampling and analysis \x97 Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS) | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and... | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of gossypol in cotton seed and feeding stuff by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis - Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with on-line HPLC-GC-FID analysis | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of pentachlorophenol (PCP) in feed materials and compound feed by LC-MS/MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x96 Determination of the radionuclides Iodine-131, Caesium-134 and Caesium-137 in feed | |
| Animal feeding stuffs: Methods of sampling and analysis \x97 Determination of carotenoids in animal compound feed and premixtures by high performance liquid chromatography \x97 UV detection (HPLC-UV) | |
| Animal feeding stuffs: Methods of sampling and analysis \x97 Determination of inorganic arsenic in animal feed by anion-exchange HPLC-ICP-MS | |
| Animal feeding stuffs: Methods of sampling and analysis \x97 Determination of theobromine in feed materials and compound feed, including cocoa derived ingredients, by liquid chromatography | |
| Animal feeding stuffs: Methods of sampling and analysis \x97 Determination of vitamin A, E and D content \x97 Method using solid phase extraction (SPE) clean-up and highperformance liquid chromatography (HPLC)... | |
| Animal feeding stuffs: Methods of sampling and analysis \x97 Screening and determination of authorized coccidiostats at additive and 1 % and 3 % cross-contamination levels, and of non-registered coccidiostats and... | |
| Beauty Salon Services - Requirements and recommendations for the provision of service | |
| Bio-based products - Determination of the oxygen content using an elemental analyser | |
| Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test | |
| Building automation and control systems - Control applications | |
| Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware | |
| Building information modelling (BIM) - Semantic modelling and linking (SML) Part 1: Generic modelling patterns | |
| Building information modelling (BIM) - Semantic modelling and linking (SML) Part 2: Domain-specific modelling patterns | |
| Building information modelling - Information structure based on EN ISO 16739 1 to exchange data templates and data sheets for construction objects Part 2: Configurable construction objects and requirements | |
| Building Information Modelling - Level of Information Need Part 1: Concepts and principles | |
| Cathodic protection of internal surfaces of metallic tanks, structures, equipment, and piping containing seawater | |
| Characterisation of one component foam Part 1: Foam yield characteristics | |
| Characterisation of one component foam Part 2: Expansion characteristics | |
| Characterisation of one component foam Part 3: Application | |
| Characterisation of one component foam Part 4: Mechanical strength | |
| Characterisation of one component foam Part 5: Insulation | |
| Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content Part 2: Calculation method | |
| Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content Part 3: Sedimentation method | |
| Characterization of bulk materials \x97 Determination of a size-weighted fine fraction and crystalline silica content Part 1: General information and choice of test methods | |
| Characterization of sludge - Evaluation of sludge density | |
| Chemical disinfectants and antiseptics - Hygienic handrub virucidal - Test method and requirements (phase 2/step 2) | |
| Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)... | |
| Chemical disinfectants and antiseptics \x96 Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area \x96 Test method and requirements (phase 2, step 1)... | |
| Chemical disinfectants and antiseptics \x97 Methods of airborne room disinfection by automated process \x97 Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities | |
| Chemical disinfectants and antiseptics \x97 Quantitative non- porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area \x97 Test method and... | |
| Chemical disinfectants and antiseptics \x97 Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area \x97 Test method and requirements... | |
| Chemical disinfectants and antiseptics \x97 Quantitative surface test for the evaluation of teat disinfectants used in the veterinary area \x97 Test method and requirements (phase 2 step 2) | |
| Chemical disinfectants and antiseptics \x97 Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action... | |
| Chemicals used for treatment of water intended for human consumption - Ironbased coagulants - Analytical methods | |
| Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods | |
| Children\x92s Furniture \x97 Seating for children \x97 Safety requirements and test methods | |
| Classification for bicycles usage | |
| Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types) | |
| Classification of wood adhesives for non-structural timber products for exterior use | |
| Cleanrooms and associated controlled environments \x97 Biocontamination control | |
| Climbing/bouldering walls for use in the water area of swimming pools of public use - Safety and operational requirements | |
| Clothing \x97 Physiological effects \x97 Measurement of water vapour resistance by means of a sweating manikin | |
| Complementary product category rules for gypsum-based construction products | |
| Conical Fittings with a 6% (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Lock Fittings | |
| Conservation of Cultural Heritage - Characterization of mortars used in cultural heritage | |
| Conservation of Cultural Heritage - Methods and materials for cleaning porous inorganic materials | |
| Conservation of cultural heritage - Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage | |
| Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product | |
| Conservation of Cultural Heritage \x97 Finishes of built heritage \x97 Investigation and documentation | |
| Conservation of cultural heritage \x97 Historic timber structures \x97 Guidelines for the on-site assessment of load-bearing timber structures | |
| Conservation of cultural heritage \x97 Procurement of conservation services and works | |
| Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma mass spectrometry (ICP-MS) | |
| Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma optical emission spectrometry (ICP-OES) | |
| Construction products: Assessment of release of dangerous substances - Analysis of organic substances in eluates | |
| Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests | |
| Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis | |
| Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances | |
| Construction products: Assessment of release of dangerous substances - Preparation of test portions from the laboratory sample for testing of release and analysis of content | |
| Construction products: Assessment of release of dangerous substances \x96 Analysis of inorganic substances in eluates | |
| Construction products: Assessment of release of dangerous substances \x97 Dose assessment of emitted gamma radiation | |
| Continuous-fibre-rei nforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction | |
| Copper and Copper Alloys - Strip for Lead Frames | |
| Copper and copper alloys \x96 Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil | |
| Cosmetics \x96 Analytical methods \x96 LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU | |
| Cycles \x97 Electrically power assisted cycles \x97 EPAC Mountain bikes | |
| Data protection and privacy by design and by default | |
| Design and construction of backfilled and grouted borehole heat exchangers | |
| Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users | |
| Detail Specification: Two-Part Connectors for Printed Boards Having a Grid of 2,54 mm, Short Version in Compliance with CECC 75 101-801, with Assessed Quality | |
| Determination of burning behaviour of dust layers | |
| Determination of compressive shear strength of wood adhesives at elevated temperatures | |
| Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air | |
| Determination of screw pull out forces from screw thread channels | |
| Determination of Shear Strength between Different Layers of Multilayer Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure | |
| Determination of Shear Strength for In-Plane Forces of Joints between Prefabricated Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure | |
| Determination of Shear Strength for Out-Of-Plane Forces of Joints between Prefabricated Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure | |
| Determination of Shear Strength of Welded Joints of Reinforcement Mats or Cages for Prefabricated Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure | |
| Determination of Steel Stresses in Unloaded Reinforced Components Made of Autoclaved Aerated Concrete | |
| Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry | |
| Determination of the strength of infill supports - Test method and requirements | |
| Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions \x97 Method by measurement of pressure increase | |
| Digital Information Interchange in the Insurance Industry \x97 Transfer of electronic documents Part 1: Process and Data Model | |
| District cooling pipes - Bonded single pipe systems for directly buried cold water networks Part 1: Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and... | |
| District cooling pipes - Bonded single pipe systems for directly buried cold water networks Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and... | |
| District cooling pipes - Bonded single pipe systems for directly buried cold water networks Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation... | |
| District cooling pipes - Factory made flexible pipe system Part 1: Classification, general requirements and test methods | |
| District cooling pipes - Factory made flexible pipe systems Part 2: Bonded system with plastic service pipes; requirements and test methods | |
| District cooling pipes - Factory made flexible pipe systems Part 3: Non bonded system with plastic service pipes; requirements and test methods | |
| District heating and district cooling pipe systems \x97 Terms and definitions | |
| Domestic and non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW | |
| Domestic appliances used for drinking water treatment not connected to water supply - Jug water filter systems - Safety and performance requirements, labeling and information to be supplied | |
| Domestic Furniture - Beds and Mattresses - Safety Requirements and Test Methods | |
| Domestic Furniture - Seating - Test Methods for the Determination of Strength and Durability | |
| Domestic Furniture - Storage Furniture - Safety Requirements and Test Methods | |
| Domestic Furniture - Tables - Test Methods for Determination of Strength, Durability and Stability | |
| Domestic spas/whirlpool spas/hot tubs \x96 Safety requirements and test methods | |
| Domestic swimming pools \x97 Environmental performance efficiency \x97 Performance evaluation, methodology, and classification of the use of outdoor pools and their equipment | |
| Doping prevention in sport \x97 Good development and manufacturing practices aimed at preventing the presence of prohibited substances in food intended for sportspeople and food supplements | |
| E-liquid ingredients | |
| Earthworks - Geotechnical laboratory tests Part 1: Degradability test standard | |
| Earthworks - Geotechnical laboratory tests Part 2: Fragmentability test standard | |
| Earthworks - Geotechnical laboratory tests Part 3: Methylene blue value VBS on soils and rocks | |
| Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type | |
| Electronic cigarettes and e-liquids - Reference e-liquids | |
| Energy measurement and monitoring plan \x97 Design and implementation \x97 Principles for energy data collection | |
| Energy performance of buildings - Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient - General Principles, Module M1-7 | |
| Entertainment technology - Specifications for design and manufacture of aluminium and steel trusses | |
| Entertainment technology \x97 Machinery for stages and other production areas \x97 Safety requirements and inspections | |
| Entertainment technology \x97 Machinery for stages and other production areas Part 2: Safety requirements for stands and truss lifts | |
| Environmental Solid Matrices - Determination of polychlorinated biphenyls (PCB) by gas chromatography - mass selective detection (GC-MS) or electron-capture detection (GC-ECD) | |
| Equipment and components intended for use in potentially explosive atmospheres in underground mines | |
| Ergonomics - Ergonomics of PPE ensembles | |
| European CBRNE glossary | |
| Fertilizers - Determination of nitrification inhibitor DMPSA in fertilizers - Method using high-performance liquid chromatography (HPLC) | |
| Fertilizers \x96 Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD) | |
| Fertilizers \x97 Determination of perchlorate in mineral fertilizers by liquid chromatography and tandem mass spectrometry detection (LC-MS/MS) | |
| Fibre cement products - Determination of pull through and shear resistance and bending strength calculations Part 1: Flat sheets | |
| Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations Part 2: Profiled sheets | |
| Fire extinguishing systems in commercial kitchens - System design, documentation, and test requirements | |
| Fitness centres - Requirements for centre amenities and operation Part 2: Requirements for supervision and staff | |
| Fitness centres \x96 Requirements for centre amenities and operation \x96 Operational and managerial requirements | |
| Fixed firefighting systems - Automatic sprinkler systems - Design, assembly, installation and commissioning of pump sets | |
| Fixed firefighting systems - Water mist systems Part 2: Product characteristics and test methods for nozzles | |
| Fixed firefighting systems \x97 Components for water mist systems Part 3: Requirements and test methods for check valves | |
| Fixed firefighting systems \x97 Water mist components Part 1: Product characteristics and test methods for strainer and filter components | |
| Fixed-time cybersecurity evaluation methodology for ICT products | |
| Flanges and their joint Circular flanges for pipes, valves, fittings and accessories, class designated Part 4: Aluminium alloy flanges | |
| Flanges and their joints \x97 Circular flanges for pipes, valves, fittings and accessories, Class designated \x97 Part 1: Steel flanges, NPS 1/2 to 24 | |
| Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, Class designated Part 3: Copper alloy flanges | |
| Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing Part 1: Cradle to grave and module... | |
| Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing Part 2: Cradle to gate with options,... | |
| Flexible sheets for waterproofing \x96 Solar Reflectance Index | |
| Foodstuffs - Detection of food allergens by liquid chromatography - mass spectrometry (LC-MS) methods - General considerations | |
| Foodstuffs - Determination of aflatoxins in spices other than paprika by IAC clean-up and HPLC-FLD with post-column derivatization | |
| Foodstuffs - Determination of Alternaria toxins in tomato, wheat and sunflower seeds by SPE clean-up and HPLC-MS/MS | |
| Foodstuffs \x96 Determination of citrinin in food by liquid chromatography tandem mass spectrometry (LC-MS/MS) | |
| Foodstuffs \x96 Determination of elements and their chemical species \x96 Determination of aluminium by inductively coupled plasma mass spectrometry (ICP-MS) | |
| Foodstuffs \x96 Determination of elements and their chemical species \x96 Determination of aluminium by inductively coupled plasma optical emission spectometry (ICP-OES) | |
| Foodstuffs \x96 Determination of ergot alkaloids in cereals and cereal products by dSPE clean-up and HPLC-MS/MS | |
| Foodstuffs \x96 Determination of zearalenone and trichothecenes including deoxynivalenol and its acetylated derivatives (3-acetyl-deoxynival enol and 15-acetyl-deoxynival enol), nivalenol T-2 toxin and HT-2 toxin in cereals and cereal products by... | |
| Foodstuffs \x96 Minimum performance requirements for determination of gluten by ELISA | |
| Foodstuffs \x96 Multimethod for the screening of aflatoxin B1, deoxynivalenol, fumonisin B1 and B2, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone in foodstuffs, excluding foods for infants and young... | |
| Foodstuffs \x97 Determination elements and their chemical species \x97 Determination of organomercury in seafood by elemental mercury analysis | |
| Foodstuffs \x97 Determination of ochratoxin A in pork meat and derived products by IAC clean-up and HPLC-FLD | |
| Foodstuffs \x97 Determination of ochratoxin A in spices, liquorice, cocoa and cocoa products by IAC clean-up and HPLC-FLD | |
| Foodstuffs \x97 Determination of phomopsin A in lupin seeds and lupin derived products by HPLC-MS/MS | |
| Foodstuffs \x97 Multimethod for the determination of aflatoxins, deoxynivalenol, fumonisins, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone by LC-MS/MS | |
| Forestry machinery - Safety requirements on radio remote controls | |
| Fugitive and diffuse emissions of common concern to industry sectors - Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere | |
| Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions | |
| Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods | |
| Furniture - Chairs and tables for educational institutions Part 2: Safety requirements and test methods | |
| Gas meter - Thermal-mass flow-meter based gas meter | |
| Gas meter \x97 Thermal-mass flow-meter based gas meter | |
| Gas-fired overhead radiant strip heaters and multiburner continuous radiant tube heater systems for non-domestic use \x96 Safety and energy efficiency | |
| Gaseous hydrogen \x97 Cylinders and tubes for stationary storage | |
| General principles for manufacturing, filling and holding e-liquids for prefilled containers or products | |
| Geosynthetics \x96 Determination of tensile properties of Polymeric Geosynthetic Barriers | |
| Geosynthetics \x96 Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers | |
| Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products | |
| Glass in building - Environmental product declaration - Product category rules for flat glass products | |
| Glass in building - Shatter properties - Requirements and assessment methods | |
| Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard | |
| Glass in Building - Special Basic Products Part 1: Borosilicate Glasses | |
| Glass in Building - Special Basic Products Part 2: Glass Ceramics | |
| Glass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties | |
| Glass in building Special basic products Borosilicate glasses Part 1-2: Evaluation of conformity/Product standard | |
| Glass in building Special basic products Glass ceramics Part 2-1: Definitions and general physical and mechanical properties | |
| Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap | |
| Glued-in rods in glued structural timber products \x97 Testing, requirements and bond shear strength classification | |
| Gymnastic equipment \x97 Individual and multifunctional vaulting boxes \x97 Safety requirements and test methods | |
| Harmonized System of Quality Assessment for Electronic Components - Generic Specification: Filters Using Waveguide Type Dielectric Resonators | |
| Harmonized System of Quality Assessment for Electronic Components - Sectional Specification: Cable Outlet Accessories for Connectors, Including Qualification Approval and Capability Approval | |
| Harmonized System of Quality Assessment for Electronic Components Detail Specification: Circular Connectors - Round Contacts, Size Diameter 1,6 mm, Threaded Coupling | |
| Harmonized System of Quality Assessment for Electronic Components Detail Specification: High Density Rectangular Connectors, Round Removable Crimp Contacts | |
| Harmonized System of Quality Assessment for Electronic Components Detail Specification: Rectangular Connectors - Flat Contacts, 0,8 mm Thickness, Locking Screw Not Detachable | |
| Harmonized System of Quality Assessment for Electronic Components Detail Specification: Two-Part Connectors for Printed Boards for High Number of Contracts with Basic Grid of 2,54 mm on 3 or 4... | |
| Harmonized system of quality assessment for electronic components: Sectional specification: Circular connectors | |
| Health informatics - The International Patient Summary | |
| Hearing protectors - Guidance on selection of individual fit testing methods | |
| Helium cryostats \x97 Protection against excessive pressure | |
| Hydrogen fuel - Product specification and quality assurance - Proton exchange membrane (PEM) fuel cell applications for road vehicles | |
| Hydrometry - Measurement requirements and classification of rainfall intensity measuring instruments | |
| Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply | |
| Implementation of Safety of machinery - Pressure sensitive protective devices Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors | |
| Industrial trucks \x97 Specifications and test methods \x97 Operator restraint systems other than lap-type seat belts | |
| Information technology - Automatic identification and data capture techniques - Electronic identification plate | |
| Information technology - Fishery and aquaculture products - Requirements for labelling of distribution units and pallets in the trade of fishery and aquaculture products | |
| Information technology \x97 RFID in rail | |
| Infra-Red Filters Used in Personal Eye-Protection Equipment | |
| Inland navigation vessels \x96 Outboard ladders | |
| Inland navigation vessels \x97 Safety rota and safety plans for passenger vessels | |
| Inland navigation vessels \x97 Stanchions and holders for tiltable and detachable railings | |
| Insulated means of transport for temperature sensitive goods - Requirements and testing Part 1: Container | |
| Insulated means of transport for temperature sensitive goods \x97 Requirements and testing Part 2: Equipment | |
| Intelligent transport systems - ESafety - ECall end to end conformance testing for IMS packet switched based systems | |
| Intelligent transport systems - eSafety - eCall High level application Protocols (HLAP) using IP Multimedia Subsystem (IMS) over packet switched networks | |
| Intelligent transport systems \x96 eSafety Part 5: eCall for UNECE Category L1 and L3 powered two-wheeled vehicles | |
| Intelligent transport systems \x97 ESafety \x97 eCall OAD for multiple Optional Additional Datasets | |
| Laminate floor coverings \x97 Determination of impact resistance with small ball | |
| Light Conveyor Belts - Method of Test for the Determination of the Relaxed Elastic Modulus | |
| Light Conveyor Belts - Test Method for the Measurement of the Electrostatic Field Generated by a Running Light Conveyor Belt | |
| Light conveyor belts. Test method for the determination of the coefficient of friction | |
| Light conveyor belts. Test method for the determination of the maximum tensile strength | |
| Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to typeapproval for onroad use \x97 Personal light electric vehicles (PLEV) \x97 Requirements and... | |
| Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation | |
| Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy | |
| Liquid petroleum products \x96 Determination of indicated cetane number (ICN) of middle distillate fuels \x96 Primary reference fuels calibration method using a constant volume combustion chamber | |
| LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture | |
| Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production | |
| Magnesium and Magnesium Alloys - Magnesium Alloy Ingots and Castings | |
| Magnesium and Magnesium Alloys - Magnesium and Magnesium Alloy Anodes, Ingots and Castings - Designation System | |
| Maintenance - Maintenance within physical asset management - Framework for improving the value of the physical assets through their whole life cycle | |
| Masonry and masonry products Methods for determining design thermal values | |
| Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry | |
| Materials obtained from End-of-Life Tyres (ELT) - Sampling method for granulates and powders stored in big-bags and small-bags | |
| Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content | |
| Mesh Type Eye and Face Protectors for Industrial and Non-Industrial Use Against Mechanical Hazards and/or Heat | |
| Modular mechanical locked floor coverings (MMF) - Determination of geometrical characteristics | |
| Modular multilayer floor coverings - Elements with a wood powder based surface layer - Specifications, requirements and test methods | |
| Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods | |
| Mountaineering equipment \x97 Personal belay lanyards \x97 Safety requirements and test methods | |
| Natural gas vehicles - Vehicle fuelling appliances | |
| Non-Destructive Examination of Welded Joints - Ultrasonic Examination of Welded Joints | |
| Non-Destructive Examination of Welds - Eddy Current Examination of Welds by Complex Plane Analysis | |
| Non-Destructive Examination of Welds - Ultrasonic Examination - Characterization of Indications in Welds | |
| Non-Destructive Examination of Welds - Ultrasonic Examination of Welded Joints - Acceptance Levels | |
| Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements | |
| Non-destructive testing - Thermographic testing - Active thermography with laser excitation | |
| Non-destructive testing - Thermographic testing - Active thermography | |
| Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique | |
| Outdoor candles \x97 Product safety labels | |
| Outdoor candles \x97 Specification for fire safety | |
| Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols | |
| Packaged refrigerating units for walk-in cold rooms \x97 Classification, performance and energy consumption testing | |
| Packaging - Determination of the degree of disintegration under simulated home composting conditions | |
| Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installation | |
| Packaging \x96 Flexible aluminium tubes \x96 Tube nozzles | |
| Paper and board - Sampling procedures for paper and board for recycling | |
| Paper and board \x97 Determination of composition of paper and board for recycling by gravimetric analysis | |
| Patient involvement in health care \x96 Minimum requirements for person-centred care | |
| Performance Test for Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure under Predominantly Longitudinal Load (Vertical Components) | |
| Permanent anchor devices and safety hooks | |
| Personal Eye Protection - Ski Goggles for Downhill Skiing | |
| Personal Protection - Equipment for Eye and Face Protection During Welding and Allied Processes | |
| Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation | |
| Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation Part 1: Specifications for barrier films | |
| Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation Part 2: Method for film permeability determination using a static technique | |
| Plastics - Controlled loop recycling of PVC-U profiles from windows and doors | |
| Plastics - Environmental Aspects - Vocabulary | |
| Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils | |
| Plastics \x96 Bio-based polymers, plastics, and plastics products \x96 Terminology, characteristics and communication | |
| Plastics \x97 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors \x97 Terminology of PVC based materials | |
| Plastics Piping Systems - Polyethylene (PE) Tapping Tees - Test Method for Impact Resistance of an Assembled Tapping Tee | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes | |
| Plastics piping systems for non-pressure underground conveyance and storage of non-potable water \x97 Test method for determination of long-term compression strength of boxes | |
| Plastics piping systems for non-pressure underground conveyance and storage of nonpotable water - Boxes used for infiltration, attenuation and storage systems Part 1: Specifications for storm water boxes made of... | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) Part 1: General | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) Part 2: Pipes | |
| Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) Part 5: Fitness for purpose of... | |
| Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Collecting heads and dividing breechings PN 16 | |
| Power operated pedestrian entrance control equipment \x97 Safety in use \x97 Requirements and test methods | |
| Power operated pedestrian swing door drives with self closing function - Requirements and test methods | |
| Private security services - Protection of critical infrastructure Part 1: General requirements | |
| Private security services - Protection of critical infrastructure Part 3: Maritime and port security services | |
| Private security services \x97 Protection of Critical Infrastructure Part 2: Airport and aviation security services | |
| Product category rules for ceramic tiles | |
| Protection Against Pollution of Potable Water in Water Installations and General Requirements of Devices to Prevent Pollution by Backflow | |
| Protective clothing - Garments with permethrin as-treated articles supporting the protection against tick bites | |
| Protective clothing \x97 Enhanced visibility equipment for medium risk situations \x97 Test methods and requirements | |
| Protective garments for motorcycle riders Part 1: Test methods | |
| Protective garments for motorcycle riders Part 2: Class AAA garments \x96 Requirements | |
| Protective garments for motorcycle riders Part 3: Class AA garments - Requirements | |
| Protective garments for motorcycle riders Part 4: Class A garments \x96 Requirements | |
| Protective garments for motorcycle riders Part 5: Class B garments \x96 Requirements | |
| Protective garments for motorcycle riders Part 6: Class C garments - Requirements | |
| Provision of services Part 1: Service procurement \x97 Guidance for the assessment of the capacity of service providers and evaluation of service proposals | |
| Provision of services Part 2: Services contracts - Guidance for the design, content and structure of contracts | |
| Provision of services Part 3: Management of Performance Measurement \x96 Guidance on the mechanism to measure performance as part of service contracts | |
| Pulp, paper and board - Determination of primary aromatic amines (PAA) in a water extract by a LC-MS method | |
| Railway applications - Adhesive bonding of rail vehicles and their components | |
| Railway applications - Braking - Passenger coach test procedure | |
| Railway applications - Infrastructure - Track alignment design parameters - Urban rail | |
| Railway applications - Interior glazing for rail vehicles | |
| Railway applications - Platform barrier systems | |
| Railway applications - Systems and procedures for change of track gauge Part 1: Automatic Variable Gauge Systems | |
| Railway applications \x96 Fire protection on railway vehicles \x96 Toxicity test of materials and components | |
| Railway applications \x96 Infrastructure \x96 Performance requirements of rail fastening systems for tramways | |
| Railway applications \x96 Rolling stock maintenance \x96 Maintenance records | |
| Railway Applications \x97 Acoustics \x97 Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies | |
| Railway applications \x97 Acoustics \x97 Measuring of door audible warnings | |
| Railway applications \x97 Communication device for urban rail \x97 System requirements | |
| Railway applications \x97 General terms and definitions | |
| Railway applications \x97 Infrastructure \x97 Under ballast mats | |
| Railway applications \x97 Rail defects Part 1: Rail defect management | |
| Railway applications \x97 Strength assessment of rail vehicle structures Part 1: General | |
| Railway applications \x97 Strength assessment of rail vehicle structures Part 2: Static strength assessment | |
| Railway applications \x97 Strength assessment of rail vehicle structures Part 3: Fatigue strength assessment based on cumulative damage | |
| Refrigerating Systems and Heat Pumps - Flexible Pipe Elements, Vibration Isolators and Expansion Joints - Requirements, Design and Installation | |
| Reporting in support of supervision of online gambling services by the gambling regulatory authorities of the Member States | |
| Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres | |
| Resilient floor coverings \x96 Quartz vinyl tiles \x96 Specification | |
| Resilient, textile, laminate and modular mechanical locked floor coverings \x97 Light reflectance value (LRV) of a flooring surface | |
| Road operation machinery - Safety Part 1: General requirements | |
| Road operation machinery - Safety Part 2: Specific requirements for road surface cleaning machines | |
| Road operation machinery - Safety Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs | |
| Road operation machinery - Safety Part 3-2: Winter service machines - Specific requirements for spreading machines | |
| Road operation machinery \x96 Safety Part 4: Road service area maintenance machines \x96 Requirements for grass and brush cutting machines | |
| Road traffic noise reducing devices \x97 Sustainability: Key Performance Indicators (KPIs) Declaration | |
| Road vehicles - Machines for mounting and demounting vehicle tyres - Safety requirements | |
| Road vehicles - Portable Emission Measuring Systems (PEMS) - Performance assessment | |
| Rubber and Plastics Tubing, Hoses and Assemblies for Use with Commercial Propane, Commercial Butane and Their Mixtures in the Vapour Phase - Part 1: Requirements for Rubber and Plastics Tubing... | |
| Rubber Hoses and Hose Assemblies for Fuel Truck Delivery - Specification | |
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification | |
| Rubber or plastics-coated fabrics - Mechanical test methods under biaxial stress states Part 1: Tensile stiffness properties | |
| Rubber- or Plastics- Coated Fabrics - Determination of Flexibility | |
| Rubber- or Plastics- Coated Fabrics - Determination of Resistance to Water Penetration - Low-Pressure Method | |
| Rubber- or plastics-coated fabrics \x97 Mechanical test methods under biaxial stress states Part 2: Determination of the pattern compensation values | |
| Safety of Industrial Trucks - Operation in Potentially Explosive Atmospheres - Use in Flammable Gas, Vapour, Mist and Dust | |
| Safety of industrial trucks - Pedestrian propelled industrial platform trucks | |
| Safety of Industrial Trucks - Pedestrian Propelled Trucks - Part 1: Stacker Trucks | |
| Safety of Industrial Trucks - Pedestrian Propelled Trucks - Part 2: Pallet Trucks | |
| Safety of Industrial Trucks - Self-Propelled Trucks Up to and Including 10 000 kg Capacity and Industrial Tractors with a Drawbar Pull Up to and Including 20 000 N -... | |
| Safety of Industrial Trucks - Self-Propelled Trucks Up to and Including 10 000 kg Capacity and Tractors with a Drawbar Pull Up to and Including 20 000 N - Part... | |
| Safety of industrial trucks Pedestrian controlled manual and semi-manual trucks Part 3: Platform trucks | |
| Safety of industrial trucks Pedestrian propelled trucks Part 4: Scissor lift pallet-trucks | |
| Safety of machinery - Cableway installations designed for the transport of material and specially designated persons - General safety requirements | |
| Safety of Machinery - Guidance for the Drafting of the Noise Clauses of Safety Standards | |
| Safety of Machinery - Pressure Sensitive Protective Devices - Part 2: General Principles for the Design and Testing of Pressure Sensitive Edges and Pressure Sensitive Bars | |
| Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices | |
| Safety of machinery - Safety requirements to finishing lines for metal strip | |
| Safety requirements - Vehicle cleaning equipment | |
| Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks | |
| Safety requirements for cableway installations designed to carry persons - Prevention and fight against fire | |
| SCM - Scheduling and Commanding Message - Standard | |
| Sectional Specification: Rectangular Connectors for Frequencies Below 3 MHz | |
| Sectional Specification: Two Part and Edge Socket Connectors for Printed Board Applications | |
| Secure storage units - Classification for high security locks according to their resistance to unauthorized opening - Distributed systems | |
| Side curtain ventilation systems \x97 Safety | |
| Soil and waste characterization \x97 Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900) | |
| Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) | |
| Specification for Sunglare Filters Used in Personal Eye-Protectors for Industrial Use | |
| Specifications for dedicated liquefied petroleum gas appliances - LPG vapour pressure appliances incorporating a horizontal cartridge in the chassis | |
| Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics Part 2: Batch drying tumblers | |
| Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics Part 3: Continuous tunnel washer | |
| Specifications for industrial laundry machines \x96 Definitions and testing of capacity and consumption characteristics Part 4: Washer-extractors | |
| Stationary source emissions - Data acquisition and handling systems Part 1: Specification of requirements for the handling and reporting of data | |
| Stationary source emissions - Data acquisition and handling systems Part 3: Specification of requirements for the performance test of data acquisition and handling systems | |
| Stationary source emissions \x96 Data acquisition and handling systems Part 2: Specification of requirements on data acquisition and handling systems | |
| Stationary source emissions \x97 Bioaerosols and biological agents \x97 Sampling of bioaerosols and collection in liquids \x97 Impingement method | |
| Stationary source emissions \x97 Data acquisition and handling systems Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling systems... | |
| Stationary source emissions \x97 Quality assurance and quality control procedures for automated dust arrestment plant monitors | |
| Suction Catheters for Use in the Respiratory Tract | |
| Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load | |
| Surfaces for sports areas \x96 Code of practice for the sampling of performance infills used within synthetic turf surfaces | |
| Surfaces for sports areas \x96 Determination of dimensional stability of shock pads used within sports systems | |
| Surfaces for sports areas \x96 Test method for the determination of the resistance to dynamic fatigue of shock pads and sports surfaces | |
| Surfaces for sports areas \x97 Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH) | |
| Sustainability of construction works - Sustainability assessment of civil engineering works - Calculation methods | |
| Tail Lifts - Platform Lifts for Mounting on Wheeled Vehicles - Safety Requirements - Part 1: Tail Lifts for Goods | |
| Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers | |
| Tail lifts Platform lifts for mounting on wheeled vehicles Safety requirements Part 2: Tail lifts for passengers | |
| Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve | |
| Tattooing \x97 Safe and hygienic practice | |
| Temporary works equipment - Execution - Requirements for manufacturing | |
| Tests for Chemical Properties of Aggregates - Part 1: Chemical Analysis | |
| Tests for chemical properties of aggregates - Part 4: Determination of susceptibility of fillers for bituminous mixtures | |
| Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts | |
| Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement | |
| Tests for chemical properties of aggregates \x97 Part 3: Preparation of eluates by leaching of aggregates | |
| Tests for chemical properties of aggregates Part 1: Chemical analysis | |
| Tests for chemical properties of aggregates Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) | |
| Tests for chemical properties of aggregates Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates | |
| Textiles - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes | |
| Textiles - Physiological effects - Measurement of liquid sweat transport and buffering | |
| Textiles and textile products - Determination of biocide additives Part 2: Chlorophenol-based preservatives, method using gas chromatography | |
| Textiles and textile products - Determination of certain preservatives, method using liquid chromatography | |
| Textiles and textile products - Determination of certain residual solvents Part 2: Determination of benzene, method using headspace gas chromatography | |
| Textiles and textile products - Determination of dimethylformamide (DMF), method using gas chromatography | |
| Textiles and textile products - Determination of dimethylfumarate (DMFu), method using gas chromatography | |
| Textiles and textile products - Determination of Polycyclic Aromatic Hydrocarbons (PAH), method using gas chromatography | |
| Textiles and textile products \x97 Determination of biocide additives Part 1: 2-Phenylphenol and triclosan, method using liquid chromatography | |
| Textiles and textile products Part 2: Safety of children's clothing \x97 Security of attachment of buttons \x97 Test method | |
| Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS) | |
| Thermal insulation products for buildings \x97 Factory-made vacuum insulation panels (VIP) \x97 Specification | |
| Thermal spraying - Tubular coating tensile test | |
| Thermoplastics rigid protective wallcovering panels for internal use in buildings \x97 Performance characteristics | |
| Tower cranes - Anti-collision systems - Safety requirements | |
| Tower cranes \x97 Anti-collision systems \x97 Safety requirements | |
| Tracked Changes (Redline) - Algae and algae products - Vocabulary | |
| Tracked Changes (Redline) - Aluminium and aluminium alloys \x97 Castings \x97 Chemical composition and mechanical properties | |
| Tracked Changes (Redline) - Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types) | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma optical emission spectrometry... | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances - Analysis of organic substances in eluates | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances | |
| Tracked Changes (Redline) - Construction products: Assessment of release of dangerous substances \x97 Analysis of inorganic substances in eluates and digests \x97 Analysis by inductively coupled plasma mass spectrometry (ICP-MS)... | |
| Tracked Changes (Redline) - Foodstuffs - Determination of citrinin in food by HPLC-MS/MS | |
| Tracked Changes (Redline) - Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods | |
| Tracked Changes (Redline) - Furniture \x97 Beds \x97 Requirements for safety, strength and durability | |
| Tracked Changes (Redline) - Gaseous hydrogen - Cylinders and tubes for stationary storage | |
| Tracked Changes (Redline) - Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles | |
| Tracked Changes (Redline) - Industrial Trucks \x97 Safety requirements and verification \x97 Supplementary requirements for operation in potentially explosive atmospheres | |
| Tracked Changes (Redline) - Inland navigation vessels - Outboard ladders | |
| Tracked Changes (Redline) - Intelligent transport systems - ESafety - ECall end to end conformance testing for IMS packet switched based systems | |
| Tracked Changes (Redline) - Intelligent transport systems - eSafety - Part 5: eCall for UNECE category L1 and L3 powered two-wheeled vehicles | |
| Tracked Changes (Redline) - Intelligent transport systems \x97 eSafety \x97 eCall High level application protocols (HLAP) using IP Multimedia Subsystem (IMS) over packet switched networks | |
| Tracked Changes (Redline) - Liquid petroleum products \x97 Determination of distillation characteristics at atmospheric pressure \x97 Micro-distillation | |
| Tracked Changes (Redline) - Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers | |
| Tracked Changes (Redline) - Materials obtained from End-of-Life Tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry | |
| Tracked Changes (Redline) - Materials obtained from End-of-Life Tyres (ELT) - Sampling method for granulates and powders stored in big-bags and small-bags | |
| Tracked Changes (Redline) - Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content | |
| Tracked Changes (Redline) - Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols | |
| Tracked Changes (Redline) - Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films | |
| Tracked Changes (Redline) - Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow | |
| Tracked Changes (Redline) - Private security services - Protection of Critical Infrastructure - Part 2: Airport and aviation security services | |
| Tracked Changes (Redline) - Private security services - Protection of critical infrastructure - Part 3: Maritime and port security services | |
| Tracked Changes (Redline) - Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification | |
| Tracked Changes (Redline) - Safety of industrial trucks - Pedestrian propelled industrial platform trucks | |
| Tracked Changes (Redline) - Safety requirements for cableway installations designed to transport persons - Precommissioning inspection and instructions for maintenance and operational inspection and checks | |
| Tracked Changes (Redline) - Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures | |
| Tracked Changes (Redline) - Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes | |
| Tracked Changes (Redline) - Textiles and textile products \x97 Determination of biocide additives \x97 Part 2: Chlorophenol-based preservatives, method using gas chromatography | |
| Tracked Changes (Redline) - Transportable gas cylinders \x97 Hoop wrapped and fully wrapped carbon composite cylinders and tubes for hydrogen | |
| Tracked Changes (Redline) - Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves | |
| Tracked Changes (Redline) - Welding - Basic weld joint details in steel Part 2: Non internal pressurized components | |
| Tracked Changes (Redlines) - Textiles and textile products \x97 Determination of certain residual solvents \x97 Part 2: Determination of benzene, method using headspace gas chromatography | |
| Transport Services - Customer communications for passenger transport services - A Universal Design approach | |
| Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen | |
| Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures \x97 Testing, requirements and repair strength verification | |
| Valuation of Energy Related Investments (VALERI) | |
| Ventilation for Buildings - Air Terminal Devices - Aerodynamic Testing of Dampers and Valves | |
| Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods | |
| Visual assessment of furniture surfaces | |
| Waste - Characterization of granular solids with potential for use as construction material - Compliance leaching test - Up-flow percolation test | |
| Waste Management - Data communication between communication management system and the back office system for stationary waste collection containers - Functional specification and the semantic data model | |
| Waste management \x96 Access control to collection containers \x96 Identification and authorization | |
| Water play equipment and features \x96 Safety requirements, test methods and operational requirements | |
| Water quality - General requirements and performance test procedures for water monitoring equipment - Measuring devices | |
| Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters | |
| Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters | |
| Water quality - Guidance on mapping of seagrasses and macroalgae in the eulittoral zone | |
| Water quality - Guidance on sampling of mesozooplankton from marine and brackish water using mesh | |
| Water quality \x96 Guidance on analysis of mesozooplankton from marine and brackish waters | |
| Water quality \x97 Guidance for assessing the efficiency and related metrics of fish passage solutions using telemetry | |
| Welding - Basic Weld Joint Details in Steel - Part 1: Pressurized Components | |
| Welding - Basic Weld Joint Details in Steel - Part 2: Non-Internal Pressurized Components | |
| Welding - Basic weld joint details in steel Part 3: Clad, buttered and lined pressurized components | |
| Windows and doors - Environmental Product Declarations - Product category rules complementary to EN 15804 for windows and pedestrian doorsets | |
| Windows and doors - Environmental Product Declarations - Product category rules for windows and pedestrian doorsets | |
| Winter service equipment - Brine production systems - Requirements and test methods | |
| Wood flooring and parquet - Determination of top layer delamination of multilayer elements - Test method | |
| Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles Part 1: Requirements and choice of test methods | |
| Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles Part 2: Rotating drum method | |
| Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles Part 3: Continuous drop method | |
| Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles Part 4: Small rotating drum method | |
| Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles Part 5: Vortex shaker method |
| << Prev | Next >> |