Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
250
270
280
290
300
310
320
325
326
327
328
329
330
331
332
333
334
335
336
337
340
350
360
370
380
390
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-and-Collar Specimens | |
| Adhesives - Determination of the time to rupture of bonded joints under static load | |
| Adhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements | |
| Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements | |
| Adhesives for load bearing timber structures - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic \x97 Test methods Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with... | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Part 4: Determination of open assembly time for one component polyurethane adhesives | |
| Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Part 5: Determination of conventional pressing time | |
| Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 \xb0C | |
| Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method | |
| Agglomerated stone - Modular tiles for flooring and stairs (internal and external) | |
| Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops | |
| Agglomerated stone \x97 Slabs and tiles for wall finishes (internal and external) | |
| Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling Terms, definitions, test conditions, test methods and requirements | |
| Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources | |
| Air quality - Certification of automated measuring systems Part 1: General principles | |
| Air quality - Certification of automated measuring systems Part 2: Initial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process | |
| Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report | |
| Air quality \x97 Certification of automated measuring systems Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources | |
| Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy | |
| Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES | |
| Automotive fuels - Automotive ethanol (E85) fuel - Requirements and test methods | |
| Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods | |
| Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders | |
| Bonding sealants Part 1: Bonded glazing sealants for direct light exposure | |
| Building Hardware - Hardware for Sliding Doors and Folding Doors - Requirements and Test Methods | |
| Candles - Product safety labels | |
| Candles - Specification for fire safety | |
| Candles - Specification for sooting behaviour | |
| Cathodic protection - Competence levels and certification of cathodic protection personnel | |
| Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) | |
| Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection | |
| Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates | |
| Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence | |
| Chemicals used for treatment of swimming pool water - Carbon dioxide | |
| Chemicals used for treatment of swimming pool water - Chlorine | |
| Chemicals used for treatment of swimming pool water - Hydrochloric acid | |
| Chemicals used for treatment of swimming pool water - Sodium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Sodium permanganate | |
| Chimneys - Design, installation and commissioning of chimneys Part 1: Chimneys for non-roomsealed heating appliances | |
| Chimneys - Design, installation and commissioning of chimneys Part 2: Chimneys for roomsealed appliances | |
| Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment | |
| Criteria for design, management and control of maintenance services for buildings | |
| Cycles - Electrically power assisted cycles - EPAC Bicycles | |
| Cycles - Requirements and test methods for cycle locks | |
| Design and application of gypsum blocks | |
| Determination of Flexural Strength of Lightweight Aggregate Concrete with Open Structure | |
| Determination of hexavalent chromium in corrosion protection layers Qualitative analysis | |
| Determination of the freeze-thaw resistance of autoclaved aerated concrete | |
| Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete | |
| Door Leaves - General and Local Flatness - Tolerance Classes | |
| Door Leaves - Height, Width, Thickness and Squareness - Tolerance Classes | |
| Dryers and Ovens, in Which Flammable Substances are Released - Safety Requirements | |
| Energy performance of buildings - Calculation of energy needs for space heating and cooling using dynamic methods - General criteria and validation procedures | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings Part 1: Calculation procedures, Module M1-14 | |
| Energy performance of buildings - Economic evaluation procedure for energy systems in buildings | |
| Energy performance of buildings - Energy requirements for lighting Part 1: Specifications, Module M9 | |
| Energy performance of buildings - Heating and DHW systems in buildings Part 3: Measured energy performance, Module M3-10, M8-10 | |
| Energy performance of buildings - Impact of Building Automation, Controls and Building Management | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 4-10: Wind power generation systems, Module M11-8-7 | |
| Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 | |
| Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings | |
| Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures | |
| Energy Performance of Buildings \x97 Control for heating, ventilating and air conditioning applications Part 1: Electronic individual zone control equipment \x97 Modules M3-5, M4-5, M5-5 | |
| Energy performance of buildings \x97 Energy requirements for lighting Part 1: Specifications, Module M9 | |
| Energy performance of buildings \x97 Heating systems and DHW in buildings Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 | |
| Energy Performance of Buildings Part 1: Impact of Building Automation, Controls and Building Management Modules M10-4,5,6,7,8,9,10 | |
| Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method | |
| Ethanol as a blending component for petrol \x97 Determination of total acidity \x97 Colour indicator titration method | |
| Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines | |
| Execution of Special Geotechnical Work - Bored Piles | |
| Execution of special geotechnical work - Diaphragm walls | |
| Execution of Special Geotechnical Work - Ground Anchors | |
| Execution of special geotechnical works - Bored piles | |
| Execution of Special Geotechnical Works - Diaphragm Walls | |
| Execution of special geotechnical works - Vertical drainage | |
| Extended application of results from fire resistance tests - Non-loadbearing ceilings Part 7: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests - Non-loadbearing walls Part 2: Masonry and Gypsum Blocks | |
| Extended application of results from fire resistance tests - Non-loadbearing walls Part 4: Glazed constructions | |
| Extended application of results from fire resistance tests - Non-loadbearing walls Part 5: Metal sandwich panel construction | |
| Extended application of results from fire resistance tests - Nonloadbearing walls Part 4: Glazed constructions | |
| Extended application of results from fire resistance tests \x97 Non-loadbearing walls Part 3: Lightweight partitions | |
| Extended application of results from fire resistance tests \x97 Non-loadbearing walls Part 6: Curtain walling | |
| Extended application of test results for fire resistance and/ or smoke control for door, shutter and openable window assemblies including their elements of building hardware Part 10: Fire resistance of... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 11: Fire resistance for operable... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 1: General requirements | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 20: Smoke control for hinged... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 2: Fire resistance of hinged... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 3: Fire resistance of hinged... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 4: Fire resistance of hinged... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 5: Fire resistance of hinged... | |
| Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 7: Fire resistance for steel... | |
| Facility Management - Part 1: Terms and definitions | |
| Facility Management - Part 7: Guidelines for Performance Benchmarking | |
| Facility Management Part 2: Guidance on how to prepare Facility Management agreements | |
| Facility Management Part 3: Guidance on quality in Facility Management | |
| Facility Management Part 4: Taxonomy, Classification and Structures in Facility Management | |
| Facility Management Part 5: Guidance on Facility Management processes | |
| Facility Management Part 6: Area and Space Measurement in Facility Management | |
| Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) Part 1: General | |
| Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) Part 2: Extraction of Fat, Pesticides and PCBs, and Determination of Fat Content | |
| Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) Part 3: Clean-Up Methods | |
| Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) Part 4: Determination, Confirmatory Tests, Miscellaneous | |
| Fertilizers - Determination of ammoniacal nitrogen | |
| Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography | |
| Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC | |
| Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda | |
| Fertilizers - Determination of the water-soluble potassium content | |
| Fertilizers - Determination of total nitrogen in urea | |
| Fertilizers - Spectrophotometric determination of biuret in urea | |
| Fertilizers \x97 Determination of dicyandiamide \x97 Method using high-performance liquid chromatography (HPLC) | |
| Fixed firefighting systems - Condensed aerosol extinguishing systems Part 1: Requirements and test methods for components | |
| Fixed firefighting systems - Condensed aerosol extinguishing systems Part 2: Design, installation and maintenance | |
| Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen | |
| Food processing machinery \x97 Fish heading and filleting machines \x97 Safety and hygiene requirements | |
| Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction | |
| Foodstuffs - Determination of trace elements - Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion | |
| Free access multi-sports equipment - Requirements, including safety, and test methods | |
| Fugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks | |
| Fugitive and diffuse emissions of common concern to industry sectors - Qualification of fugitive dust sources by Reverse Dispersion Modelling | |
| Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| Furniture - Strength, durability and safety - Requirements for non-domestic tables | |
| Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | |
| Gas infrastructure - Safety Management System for Gas Networks with maximum operating pressure up to and including 16 bar | |
| Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW | |
| Gas-fired central heating boilers Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW | |
| Gas-fired central heating boilers Part 2-2: Specific standard for type B1 appliances | |
| Gas-fired central heating boilers Part 2-3: Specific standard for hybrid units combining a gas-fired boiler and an electrical heat pump in a product | |
| Gas-fired central heating boilers Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1 000 kW | |
| Gas-fired heating boilers Part 1: General requirements and tests | |
| General principles of design of fibrous (gypsum) plaster works | |
| General purpose adhesives for structural assembly - Requirements and test methods | |
| Geosynthetic barriers - Characteristics required for use in transportation infrastructure | |
| Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays | |
| Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) | |
| Glass in building Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) | |
| Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement | |
| Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards | |
| Hardware for furniture - Strength and durability of extension elements and their components | |
| Harmonized System of Quality Assessment for Electronic Components General Specification: Discrete Pressure Contact Power Semiconductor Devices (Qualification Approval) | |
| Health care services - Quality management systems - Requirements based on EN ISO 9001:2008 | |
| Health informatics - Categorial structure for terminologies of human anatomy | |
| Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements | |
| Heating boilers - Energy assessment of hot water storage systems | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources | |
| Heating systems in buildings - Design of embedded water based surface heating and cooling systems Part 1: Determination of the design heating and cooling capacity | |
| Heating systems in buildings - Design of heat pump heating systems | |
| Heating systems in buildings - Inspection of boilers and heating systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements) | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: Space heating generation systems, the performance and quality of district heating and... | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies Part 4-1: Space heating generation systems, combustion systems (boilers) | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies Part 4-7: Space heating generation systems, biomass combustion systems | |
| Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems | |
| Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria | |
| Hydraulic binder for non-structural applications: definition, specifications and conformity criteria | |
| Identification Card Systems - Inter-Sector Electronic Purse - Part 2: Security Architecture | |
| Identification Card Systems - Inter-Sector Electronic Purse - Part 3: Data Elements and Interchanges | |
| Identification Card Systems - Inter-Sector Electronic Purse Part 1: Definitions, Concepts and Structures | |
| Identification Card Systems - Inter-Sector Electronic Purse Part 4: Data Objects | |
| Identification card systems - Surface transport applications - Interoperable Public Transport Applications - Framework | |
| Identification card systems - Surface transport applications - Part 1: Elementary data types, general code lists and general data elements | |
| Identification card systems Surface transport applications Part 2: Transport and travel payment related data elements and code lists | |
| Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics | |
| Industrial Thermoprocessing Equipment - Noise Test Code for Industrial Thermoprocessing Equipment Including its Ancillary Handling Equipment | |
| Industrial valves - Performance characteristics of thermoplastic valves when used as construction products | |
| Inland navigation vessels - Equipment for rope leading - Part 1: General requirements | |
| Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead | |
| Inland navigation vessels - Equipment for rope leading - Part 4: Rope lead | |
| Inland navigation vessels - Equipment for rope leading Part 3: Roller fairleads | |
| Inland navigation vessels - Studless anchor chain - Anchor equipment | |
| Installation and Equipment for Liquefied Natural Gas - Ship to Shore Interface | |
| Intelligent transport systems - After-theft systems for the recovery of stolen vehicles Part 1: Reference architecture and terminology | |
| Intelligent transport systems - After-theft systems for the recovery of stolen vehicles Part 4: Interface and system requirements in terms of long range communication system | |
| Intelligent transport systems \x97 After-theft systems for the recovery of stolen vehicles Part 2: Common status message elements | |
| Intelligent transport systems \x97 After-theft systems for the recovery of stolen vehicles Part 3: Interface and system requirements in terms of short range communication system | |
| Intelligent transport systems \x97 After-theft systems for the recovery of stolen vehicles Part 5: Messaging interface | |
| Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods | |
| Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method | |
| Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method | |
| Liquid petroleum products \x97 Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber | |
| LPG equipment and accessories Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections | |
| Machine-Tools Safety - Safety Requirements for the Design and Construction of Work Holding Chucks | |
| Maintenance - Maintenance Key Performance Indicators | |
| Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware | |
| Methodology for functional safety assessment of protective systems for potentially explosive atmospheres | |
| Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres | |
| Methods of Measuring the Energy Consumption of Electric Mains Operated Household Refrigerators, Frozen Food Storage Cabinets, Food Freezers and Their Combinations, Together with Associated Characteristics | |
| Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources | |
| Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction | |
| Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | |
| Oil spill identification - Petroleum and petroleum related products Part 1: Sampling | |
| Oil spill identification - Petroleum and petroleum related products Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses | |
| Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering | |
| Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating | |
| Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion | |
| Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam | |
| Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding | |
| Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes Part 1: Sodium chloride test | |
| Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes Part 2: Copper sulphate test | |
| Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades | |
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae | |
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi | |
| Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Formaldehyde in an Aqueous Extract | |
| Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract | |
| Pellet burners for small heating boilers - Definitions, requirements, testing, marking | |
| Petrol filling stations - Safety requirements for the construction of submersible pump assemblies | |
| Petroleum products - Determination of boiling range distribution by gas chromatography method Part 1: Middle distillates and lubricating base oils | |
| Petroleum products - Determination of boiling range distribution by gas chromatography method Part 3: Crude oil | |
| Petroleum products - Determination of boiling range distribution by gas chromatography method Part 4: Light fractions of crude oil | |
| Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection | |
| Petroleum products \x97 Determination of boiling range distribution by gas chromatography method \x97 Part 2: Heavy distillates and residual fuels | |
| Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterization and designation | |
| Plastics - Recycled Plastics - Characterization of plastics waste | |
| Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates | |
| Plastics - Recycled Plastics - Characterization of Polyethylene (PE) recyclates | |
| Plastics - Recycled Plastics - Characterization of Polypropylene (PP) recyclates | |
| Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates | |
| Plastics - Sorted plastics wastes Part 2: Quality grades of sorted polyethylene (PE) wastes and specific test methods | |
| Plastics - Sorted plastics wastes Part 6: Quality grades of sorted polystyrene (PS) wastes and specific test methods | |
| Plastics \x97 Recycled Plastics \x97 Plastics recycling traceability and assessment of conformity and recycled content | |
| Plastics \x97 Sorted plastics wastes Part 3: Quality grades of sorted polypropylene (PP) wastes and specific test methods | |
| Plastics \x97 Sorted plastics wastes Part 4: Quality grades of sorted poly(ethylene terephtalate) (PET) wastes and specific test methods | |
| Plastics \x97 Sorted plastics wastes Part 5: Quality grades of sorted poly(vinyl chloride) (PVC) wastes and specific test methods | |
| Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers | |
| Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance | |
| Precast concrete products - Retaining wall elements | |
| Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes | |
| Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance | |
| Prefabricated reinforced components of lightweight aggregate concrete with open structure | |
| Primers for cold and hot applied joint sealants Part 1: Determination of homogeneity | |
| Primers for cold and hot applied joint sealants Part 2: Determination of resistance against alkali | |
| Primers for cold and hot applied joint sealants Part 3: Determination of solids content and evaporation behaviour of volatiles | |
| Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of... | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Tensile Strength Development for Polymers | |
| Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Measurement of Bond Strength by Pull-Off | |
| Railway applications - Axlebox condition monitoring - Interface and design requi rements Part 2: Performance and design requi rements of on-board systems for temperature monitoring | |
| Railway applications - Axlebox condition monitoring - Interface and design requirements Part 1: Track side equipment and rolling stock axlebox | |
| Railway applications - Axlebox condition monitoring - Interface and design requirements Part 2: Performance and design requirements of on-board systems for temperature monitoring | |
| Railway applications - Brake indicators Part 1: Pneumatically operated brake indicators | |
| Railway applications - Brake indicators | |
| Railway applications - Braking - Brake pads | |
| Railway applications - Braking - Distributor valves and distributor-isolatin g devices | |
| Railway applications - Classification system for railway vehicles - Part 4: Function groups | |
| Railway applications - Crashworthiness requirements for railway vehicle bodies | |
| Railway applications - Gauges Part 1: General - Common rules for infrastructure and rolling stock | |
| Railway applications - Gauges Part 2: Rolling stock gauge | |
| Railway applications - Gauges Part 3: Structure gauges | |
| Railway applications - In-service wheelset operation requirements - Inservice and off-vehicle wheelset maintenance | |
| Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure | |
| Railway applications - Method for determining the equivalent conicity | |
| Railway applications - Noise emission - Characterization of the dynamic properties of track selections for pass by noise measurements | |
| Railway applications - Passenger alarm subsystem Part 1: General requirements and passenger interface for the passenger emergency brake system | |
| Railway applications - Wheel/rail friction management - Flange lubrication | |
| Railway applications - Wheel/Rail friction management - Part 1-1: Equipment and Application - Flange Lubricants | |
| Railway applications \x97 Braking \x97 Brake block holder and brake shoe key for railway vehicles | |
| Railway applications \x97 Classification system for railway vehicles Part 5: System Breakdown Structure (SBS) | |
| Railway applications \x97 Designation system for railway vehicles \x97 Part 1: General principles | |
| Railway applications \x97 Designation system for railway vehicles \x97 Part 2: Product groups | |
| Railway applications \x97 Designation system for railway vehicles \x97 Part 3: Designation of installation sites and locations | |
| Railway applications \x97 Gauges Part 1: General \x97 Common rules for infrastructure and rolling stock | |
| Railway applications \x97 Gauges Part 2: Rolling stock gauge | |
| Railway applications \x97 Gauges Part 4: Catalogue of defined gauges | |
| Railway applications \x97 Wheel/Rail friction management Part 2-1: Properties and Characteristics \x97 Flange lubricants | |
| Resilient, textile, laminate and modular mechanical locked floor coverings (MMF) - Floor covering standard symbols - Complementary element | |
| Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus | |
| Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus Part 2: Free flow apparatus | |
| Road service area maintenance equipment Part 1: Terminology | |
| Road service area maintenance equipment Part 2: Performance assessment | |
| Road service area maintenance equipment Part 3: Classification | |
| Road service area maintenance equipment Part 4: Delivery acceptance of the machines by the users | |
| Road transport and traffic telematics - Electronic fee collection - Interoperability application profile for DSRC | |
| Safety of Industrial Trucks - Additional Requirements for Automated Functions on Trucks | |
| Safety of Industrial Trucks - Driverless Trucks and Their Systems | |
| Safety of Industrial Trucks - Self Propelled Trucks over 10 000 KG Capacity | |
| Sanitary appliances - Methacrylic dispersions of high filler content | |
| Sanitary appliances - Multifunction shower cabinets | |
| Slow heat release appliances fired by solid fuel - Requirements and test methods | |
| Soil improvers and growing media - Determination of particle size distribution | |
| Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm | |
| Solid biofuels - Conversion of analytical results from one basis to another | |
| Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes Part 1: Pellets | |
| Solid biofuels - Determination of mechanical durability of pellets and briquettes Part 2: Briquettes | |
| Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn | |
| Solid biofuels - Determination of total content of sulfur and chlorine | |
| Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use | |
| Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use | |
| Solid biofuels - Fuel quality assurance Part 1: General requirements | |
| Solid biofuels - Fuel quality assurance Part 5: Firewood for non-industrial use | |
| Solid biofuels - Fuel quality assurance Part 6: Non-woody pellets for non-industrial use | |
| Solid biofuels \x97 Fuel quality assurance Part 4: Wood chips for non-industrial use | |
| Solid recovered fuels - Determination of ash content | |
| Solid recovered fuels - Determination of calorific value | |
| Solid recovered fuels - Determination of moisture content using the oven dry method Part 3: Moisture in general analysis sample | |
| Solid recovered fuels - Determination of particle size distribution Part 1: Screen method for small dimension particles | |
| Solid recovered fuels - Determination of particle size distribution Part 2: Maximum projected length method (manual) for large dimension particles | |
| Solid recovered fuels - Determination of particle size distribution Part 3: Method by image analysis for large dimension particles | |
| Solid recovered fuels - Determination of the content of volatile matter | |
| Solid recovered fuels - Methods for sampling | |
| Solid recovered fuels - Methods for the determination of biomass content | |
| Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content | |
| Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content | |
| Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) | |
| Solid recovered fuels - Methods for the preparation of the laboratory sample | |
| Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample | |
| Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels | |
| Solid recovered fuels - Specifications and classes | |
| Solid recovered fuels - Terminology, definitions and descriptions | |
| Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar | |
| Steel static storage systems - Adjustable pallet racking systems - Principles for structural design | |
| Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices | |
| Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures | |
| Structural finger jointed solid timber \x97 Performance requirements and minimum production requirements | |
| Structural timber - Structural timber preservative treated against biological attack | |
| Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear | |
| Surfaces for sport areas \x97 Synthetic turf and textile sports surfaces Part 5: Specification for infill materials | |
| Surfaces for sports areas - Part 1: Determination of rotational resistance | |
| Surfaces for sports areas - Part 2: Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory | |
| Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf | |
| Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces | |
| Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use Part 4: Specification for shockpads used with synthetic turf, needle-punch and textile sports surfaces | |
| Sweepers - Part 1: Classification and Terminology | |
| Sweepers Part 2: Performance requirements and test methods | |
| Sweepers Part 3: Efficiency of particulate matter collection \x97 Testing and Evaluation | |
| Sweepers Part 4: Symbols for operator controls and other displays | |
| Swimming pools Part 1: Safety requirements for design | |
| Swimming pools Part 2: Safety requirements for operation | |
| Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage | |
| Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications | |
| Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification | |
| Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions | |
| Thermal spraying - Determination of shear load resistance of thermally sprayed coatings | |
| Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings | |
| Thermal spraying - Safety requirements for thermal spraying equipment Part 2: Gas control units | |
| Tracked Changes (Redline) - Adhesives - One component polyurethane (PUR) for loadbearing timber structures - Classification and performance requirements | |
| Tracked Changes (Redline) - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods Part 3: Creep deformation test at cyclic climate conditions with specimens loaded... | |
| Tracked Changes (Redline) - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods Part 4: Determination of open assembly time under referenced conditions | |
| Tracked Changes (Redline) - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods Part 5: Determination of minimum pressing time under referenced conditions | |
| Tracked Changes (Redline) - Adhesives for load bearing timber structures other than phenolic and aminoplastic \x97 Test methods \x97 Part 1: Long-term tension load test perpendicular to the bond line... | |
| Tracked Changes (Redline) - Adhesives for load bearing timber structures other than phenolic and aminoplastic \x97 Test methods \x97 Part 3: Creep deformation test at cyclic climate conditions with specimens... | |
| Tracked Changes (Redline) - Agglomerated stone. Slabs and cut-to-size products for vanity and kitchen tops | |
| Tracked Changes (Redline) - Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling \x97 Terms, definitions, test conditions, test methods and... | |
| Tracked Changes (Redline) - Air quality - Assessment of air quality monitoring equipment - Part 1: General principles of certification | |
| Tracked Changes (Redline) - Air quality - Assessment of air quality monitoring equipment - Part 2: Initial assessment of the manufacturer's quality management system and post certification surveillance for the... | |
| Tracked Changes (Redline) - Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of... | |
| Tracked Changes (Redline) - Air quality - Assessment of air quality monitoring equipment - Part 4: Performance criteria and test procedures for portable automated measuring systems for periodic measurements of... | |
| Tracked Changes (Redline) - Animal feeding stuffs - Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium iron, zinc, copper, manganese, cobalt, molybdenum and lead by... | |
| Tracked Changes (Redline) - Automotive fuels - Automotive ethanol (E85) fuel - Requirements and test methods | |
| Tracked Changes (Redline) - Bonding sealants \x97 Part 1: Bonded glazing sealants for direct light exposure | |
| Tracked Changes (Redline) - Building hardware \x96 Hardware for sliding doors and folding doors \x96 Requirements and test methods | |
| Tracked Changes (Redline) - Candles \x96 Specification for sooting behaviour | |
| Tracked Changes (Redline) - Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection | |
| Tracked Changes (Redline) - Chimneys - Design, installation and commissioning - Part 2: Chimneys and connecting flue pipes for room sealed combustion appliances | |
| Tracked Changes (Redline) - Chimneys \x97 Design, installation and commissioning \x97 Part 1: Chimneys and connecting flue pipes for non-room sealed combustion appliances | |
| Tracked Changes (Redline) - Door leaves - Height, width, thickness and squareness - Tolerance classes | |
| Tracked Changes (Redline) - Dryers and ovens, in which flammable substances are released \x97 Safety requirements | |
| Tracked Changes (Redline) - Electronic fee collection - Interoperability application profile for DSRC | |
| Tracked Changes (Redline) - Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 | |
| Tracked Changes (Redline) - Energy performance of buildings - Economic evaluation procedure for energy systems in buildings Part 1: Calculation procedures, Module M1-14 | |
| Tracked Changes (Redline) - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling),... | |
| Tracked Changes (Redline) - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 4-5: District heating and cooling, Module M3-8-5, M4- 8-5, M8-8-5,... | |
| Tracked Changes (Redline) - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies Part 4-8: Space heating generation systems, air heating and overhead radiant... | |
| Tracked Changes (Redline) - Energy performance of buildings \x97 Heating systems and DHW in buildings Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 | |
| Tracked Changes (Redline) - Energy performance of buildings \x97 Method for calculation of system energy requirements and system efficiencies Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9,... | |
| Tracked Changes (Redline) - Energy performance of buildings \x97 Method for calculation of system energy requirements and system efficiencies Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4,... | |
| Tracked Changes (Redline) - Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates | |
| Tracked Changes (Redline) - Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method | |
| Tracked Changes (Redline) - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part... | |
| Tracked Changes (Redline) - Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 1:... | |
| Tracked Changes (Redline) - Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware - Part... | |
| Tracked Changes (Redline) - Fixed firefighting systems - Condensed aerosol extinguishing systems Part 1: Requirements and test methods for components | |
| Tracked Changes (Redline) - Fixed firefighting systems - Condensed aerosol extinguishing systems Part 2: Design, installation and maintenance | |
| Tracked Changes (Redline) - Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances | |
| Tracked Changes (Redline) - Gas-fired central heating boilers \x97 Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not... | |
| Tracked Changes (Redline) - Gas-fired heating boilers - Part 1: General requirements and tests | |
| Tracked Changes (Redline) - General purpose adhesives for structural assembly\x97Requirem ents and test methods | |
| Tracked Changes (Redline) - Geosynthetic barriers - Characteristics required for use in transportation infrastructure | |
| Tracked Changes (Redline) - Hardware for furniture - Strength and durability of extension elements and their components | |
| Tracked Changes (Redline) - Identification card systems - Surface transport applications Part 1: Elementary data types, general code lists and general data elements | |
| Tracked Changes (Redline) - Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods | |
| Tracked Changes (Redline) - Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method | |
| Tracked Changes (Redline) - Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method | |
| Tracked Changes (Redline) - Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber | |
| Tracked Changes (Redline) - Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling | |
| Tracked Changes (Redline) - Oil spill identification \x97 Petroleum and petroleum related products \x97 Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses | |
| Tracked Changes (Redline) - Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering | |
| Tracked Changes (Redline) - Packaging \x96 Transport packaging for dangerous goods \x96 Comparative material testing of polyethylene grades | |
| Tracked Changes (Redline) - Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae | |
| Tracked Changes (Redline) - Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi | |
| Tracked Changes (Redline) - Petroleum products - Determination of boiling range distribution by gas chromatography method Light fractions of crude oil | |
| Tracked Changes (Redline) - Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates | |
| Tracked Changes (Redline) - Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates | |
| Tracked Changes (Redline) - Plastics - Sorted plastics wastes - Part 1: General characterisation | |
| Tracked Changes (Redline) - Plastics \x97 Recycled plastics \x97 Characterization of polypropylene (PP) recyclates | |
| Tracked Changes (Redline) - Plastics \x97 Recycled plastics \x97 Characterization of polystyrene (PS) recyclates | |
| Tracked Changes (Redline) - Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity | |
| Tracked Changes (Redline) - Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali | |
| Tracked Changes (Redline) - Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles | |
| Tracked Changes (Redline) - Railway applications - Brake indicators | |
| Tracked Changes (Redline) - Railway applications - Braking - Brake block holder and brake block key | |
| Tracked Changes (Redline) - Railway applications - Braking - Distributor valves and distributor-isolatin g devices | |
| Tracked Changes (Redline) - Railway applications - In- service wheelset operation requirements - In-service and off-vehicle wheelset maintenance | |
| Tracked Changes (Redline) - Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants | |
| Tracked Changes (Redline) - Railway applications \x97 Wheel/Rail friction management \x97 Part 1-1: Equipment and Application \x97 Flange Lubricants | |
| Tracked Changes (Redline) - Resilient, textile, laminate and modular mechanical locked floor coverings (MMF) - Floor covering standard symbols - Complementary element | |
| Tracked Changes (Redline) - Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm | |
| Tracked Changes (Redline) - Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar) | |
| Tracked Changes (Redline) - Surfaces for sports areas \x97 Synthetic turf and needle-punched surfaces primarily designed for outdoor use Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces... | |
| Tracked Changes (Redline) - Swimming pools for public use Part 1: Safety requirements for design | |
| Tracked Changes (Redline) - Swimming pools for public use Part 2: Safety requirements for operation | |
| Tracked Changes (Redline) - Thermal spraying \x97 Recommendations for constructional design of components with thermally sprayed coatings | |
| Tracked Changes (Redline) - Thermal spraying \x97 Safety requirements for thermal spraying equipment \x97 Part 2: Gas control units | |
| Tracked Changes (Redline) - Winter and road service area maintenance equipment - Data acquisition and transmission - In-vehicle data acquisition | |
| Tracked Changes (Redline) - Winter maintenance equipment \x97 Road weather information systems \x97 Part 3: Requirements on measured values of stationary equipment | |
| Tracked Changes (Redline) - Workplace exposure \x97 Terminology | |
| Tracked Changes (Redline) \x96 Furniture \x97 Strength, durability and safety \x97 Requirements for non-domestic tables | |
| Tracked Changes (Redlines) - Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications | |
| Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports | |
| Underground mining machines Mobile extracting machines at the face Safety requirements for shearer loaders and plough systems | |
| Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings | |
| Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration | |
| Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems | |
| Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems | |
| Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems | |
| Ventilation for buildings - Fire precautions for air distribution systems in buildings | |
| Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges | |
| Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron | |
| Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing | |
| Water quality - Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment | |
| Water quality - Guidance standard for the surveying of macrophytes in lakes | |
| Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermohl technique) | |
| Windows, Doors, Shutters and Blinds - Bullet Resistance - Requirements and Classification | |
| Windows, Doors, Shutters and Blinds - Bullet Resistance - Test Method | |
| Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition | |
| Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability | |
| Winter and road service area maintenance equipments - Front-mounted equipments Part 1: Fixed front mounting plates | |
| Winter and road service area maintenance equipments - Front-mounted equipments Part 2: Interchangeability on lifting systems | |
| Winter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements | |
| Winter maintenance equipment - Road weather information systems Part 1: Global definitions and components | |
| Winter maintenance equipment - Road weather information systems Part 2: Road weather - Recommended observation and forecast | |
| Winter maintenance equipment - Road weather information systems Part 3: Requirements on measured values of stationary equipments | |
| Wood and Parquet Flooring - Determination of Bending Properties - Test Methods | |
| Wood and Parquet Flooring - Determination of Resistance to Indentation (Brinell) - Test Methods | |
| Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method | |
| Wood-based panels - Flaxboards - Specifications | |
| Workplace Atmospheres - Terminology |
| << Prev | Next >> |