Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
230
240
250
260
270
280
289
290
291
292
293
294
295
296
297
298
299
300
301
310
320
330
340
350
360
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| (Supplementary Series) Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /5: 2011 Free-Cutting Bar and Wire-Alloy | |
| Ammonium nitrate \x97 Part 8: Methods for determination of chloride content | |
| Ammonium nitrate \x97 Part 9: Method for determination of sulphate content | |
| Anaesthetic and analgesic machines - Part 3: Specification for continuous flow anaesthetic machines | |
| Anaesthetic and Analgesic Machines Part 2: Analgesic Machines of the On-Demand Type Supplied with Pre-Mixed Nitrous Oxide-Oxygen from a Single Container | |
| Anaesthetic and analgesic machines Part 4: Specification for auxiliary gas outlets and probes | |
| Analysis of Oilseed Residues Part 10: Determination of Total Residual Hexane | |
| Analysis of Oilseed Residues Part 11: Determination of Free Residual Hexane Content | |
| Analysis of Oilseed Residues Part 3: Determination of Ash Insoluble in Hydrochloric Acid | |
| Analysis of Oilseed Residues Part 4: Determination of Hexane Extract (or Light Petroleum Petroleum Extract), Called 'Oil Content' | |
| Analysis of Oilseed Residues Part 6: Determination of Urease Activity in Soya Bean Products | |
| Analysis of Oilseed Residues Part 7: Determination of Cresol Red Index in Soya Bean Products | |
| Appliance Couplers for Household and Similar General Purposes Part 1: Specification of General Requirements | |
| Appliance Couplers for Household and Similar General Purposes Part 2: Requirements for Individual Types of Coupler Section 2.1: Sewing Machine Couplers | |
| Asphaltic bitumen road emulsion for penetration (grouting and semi grouting) and surface dressing | |
| Baths for Domestic Purposes Made of Acrylic Material - Part 2: Specification for Connecting Dimensions | |
| Baths for Domestic Purposes Made of Acrylic Material Part 1: Finished Baths | |
| Bitumen Road Emulsions (Anionic and Cationic) Part 1: Specification for Bitumen Road Emulsions | |
| Bitumen Road Emulsions (Anionic and Cationic) Part 2: Code of Practice for Use of Bitumen Road Emulsions | |
| Bitumen road emulsions - Part 1: Specification for anionic bitumen road emulsions | |
| Bonded Abrasive Products Part 1: General Features of Abrasive Wheels, Segments, Bricks and Sticks | |
| Bonded Abrasive Products Part 2: Dimensions of Grinding Wheels and Segments | |
| Bonded Abrasive Products Part 3: Methods for Assessment of Static Balancing of Abrasive Wheels | |
| British Standard Tables of Diamond Pyramid Hardness Numbers | |
| Carbon and Stainless Steel Compression Couplings for Tubes Part 3: Compression Couplings for Tubes | |
| Cast Iron Spigot and Socket Drain Pipes and Fittings | |
| Cereals and Pulses Part 17: Determination of Fat Acidity | |
| Circular Flanges for Pipes, Valves and Fittings (PN Designated) Part 2: Copper Alloy and Composite Flanges | |
| Circular Flanges for Pipes, Valves and Fittings (PN Designated) Part 3: Steel, Cast Iron and Copper Alloy Flanges Section 3.1: Steel Flanges | |
| Circular Flanges for Pipes, Valves and Fittings, (PN Designated) Part 3: Steel, Cast Iron and Copper Alloy Flanges Section 3.2: Specification for Cast Iron Flanges | |
| Climbers' Helmets | |
| Cold Reduced Steel Wire for the Reinforcement of Concrete | |
| Compression coupling for tubes - Part 4. Specification for type test requirements | |
| Compression Couplings for Tubes Part 1: Specification for Heavy Series Couplings (Metric) | |
| Cylindrical Gears - ISO System of Accuracy Part 4: Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth | |
| Cylindrical Gears - ISO System of Accuracy Part 5: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information | |
| Data Sheet: Selected ISO Fits - Hole Basis | |
| Data Sheet: Selected ISO Fits - Shaft Basis | |
| Descriptions of woven textiles (excluding wool) for use in the finishing trade | |
| Design of Articles That Are to Be Coated - Part 1: General Recommendations | |
| Design of Articles That Are to Be Coated - Part 2: Recommendations for Electroplated and Autocatalytic Coatings | |
| Design of Articles That Are to Be Coated - Part 3: Recommendations for Conversion Coatings | |
| Design of Articles That Are to Be Coated - Part 4: Recommendations for Paint Coatings and Varnish Coatings | |
| Design of Articles That Are to Be Coated - Part 5: Recommendations for Anodic Oxidation Coatings | |
| Design of Articles That Are to Be Coated - Part 7: Recommendations for Thermally Sprayed Coatings | |
| Design of Articles That Are to Be Coated - Part 9: Recommendations for Low Pressure and Vacuum Deposited Coatings | |
| Design of Articles That Are to Be Coated Part 6: Recommendations for Hot-Dip Metal Coatings | |
| Design of Articles That Are to Be Coated Part 8: Recommendations for Vitreous Enamel Coatings | |
| Determination and Application of Precision Data in Relation to Methods of Test for Petroleum Products | |
| Determination of Acid-Insoluble Ash in Pulp | |
| Determination of Alkali Solubility of Pulp | |
| Determination of Ash from Petroleum Products) | |
| Determination of Dimensional Change of Fabrics Induced by Free Steam | |
| Determination of Dry-Matter Content of Pulps | |
| Determination of Existent Gum in Fuels by Jet Evaporation | |
| Determination of Sediment in Crude Petroleum and Fuel Oils (Extraction Method) | |
| Determination of Specific Surface of area of Powders Part 2. Recommended Air Permeability Methods | |
| Determination of the Bendtsen Roughness of Paper and Board | |
| Determination of the Internal Tearing Resistance of Paper | |
| Determination of the Specific Surface Area of Powders - Part 4: Recommendations for Methods of Determination of Metal Surface Area Using Gas Adsorption Techniques | |
| Determination of the specific surface area of powders Part 1. Recommendations for gas adsorption (BET) methods | |
| Determination of the Tensile Properties of Paper and Board Part 1: Constant Rate of Loading Method | |
| Determining Optical Properties of Pulp, Paper and Board Part 1: Measurement of Diffuse Reflectance Factor of Paper, Board and Pulps | |
| Digital Data Transmission Part 1: Basic Mode Control Procedures | |
| Digital Data Transmission Part 2: Character Structure for Start/ Stop and Synchronous Transmission | |
| Digital Data Transmission Part 3: The Use of Longitudinal Parity to Detect Errors in Information Messages | |
| Digital Data Transmission Part 4: Basic Mode Control Procedures; Code Independent Information Transfer | |
| Dimensions of Electronic Tubes and Valves Part 1: IEC Dimensions | |
| Dimensions of Electronic Tubes and Valves Part 2: Dimensions of United Kingdom Electronic Tubes | |
| Distribution Assemblies for Electricity Supplies for Construction and Building Sites | |
| Domestic Solid Mineral Fuel Fired Boilers with Rated Output Up to 45 kW Part 1: Specification for Boilers with Undergrate Ash Removal | |
| Domestic Solid Mineral Fuel Fired Boilers with Rated Output Up to 45 kW Part 2: Specification for Gravity Feed Boilers Designed to Burn Small Anthracite | |
| Dressed Natural Stone Kerbs, Channels, Quadrants and Setts | |
| Electrically Operated Blood Storage Refrigerators - Part 1: Specification for Closed Reach-in Types | |
| Electrically Operated Blood Storage Refrigerators - Part 2: Specification for Cabinets for the Storage of Frozen Plasma | |
| Electroplated coatings of silver for decorative purposes on nickel silver and copper | |
| Fire - Vocabulary | |
| for Spice and Condiments | |
| Gauge Blocks and Accessories Part 3: Gauge Blocks in Use | |
| Gauge blocks manufactured to imperial specification - Specification, validation and accessories | |
| Glossary of Basic Terms for Fishing Nets | |
| Glossary of Dental Terms | |
| Glossary of formwork terms | |
| Glossary of Terms Associated with Fire Part 1: General Terms and Phenomena of Fire | |
| Glossary of Terms Associated with Fire Part 2: Structural Fire Protection | |
| Glossary of Terms Associated with Fire Part 3: Fire Detection and Alarm | |
| Glossary of Terms Associated with Fire Part 5: Smoke Control | |
| Glossary of Terms Associated with Fire Part 6: Evacuation and Means of Escape | |
| Glossary of Terms Associated with Fire Part 7: Explosion Detection and Suppression Means | |
| Glossary of Terms Associated with Fire Part 9: Marine Terms | |
| Glossary of terms associated with fire. Fire protection equipment | |
| Glossary of Terms Relating to the Winding of Textile Yarns Part 1: Basic Terms for Winding | |
| Glossary of Terms Relating to the Winding of Textile Yarns Part 2: Cone and Cheese Winding Machines | |
| Glossary of Terms Relating to the Winding of Textile Yarns Part 3: Pirn Winders | |
| Glossary of Terms used in air gauging with notes on the technique | |
| Glossary of Terms Used in Offset Lithographic Printing | |
| Guide for the preparation of technical sales literature for measuring instruments and process control equipment | |
| Guide to Dimensions in Designing for Elderly People | |
| Guide to Electrical Earth Monitoring and Protective Conductor Proving | |
| Hard Metal for Wire, Bar and Tube Drawing Dies | |
| Industrial Plugs, Socket-Outlets and Couplers for a.c and d.c. Supplies | |
| Inhibited 1,1,1- Trichloroethane (Methylchloroform) | |
| ISO Limits and Fits Part 1: General, Tolerances and Deviations Section 1.1: Bases of Tolerances, Deviations and Fits | |
| ISO Limits and Fits Part 1: General, Tolerances and Deviations Section 1.2: Tables of Commonly Used Tolerance Grades and Limit Deviations for Holes and Shafts | |
| ISO limits and fits. General, tolerances and deviations | |
| ISO limits and fits. Part 4: Specification for system of cone (taper) fits for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters... | |
| ISO limits and fits. Part 5: Specification for system of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 mm to 630 mm | |
| Joints and Fittings for Use with Unplasticized PVC Pressure Pipes - Part 2: Mechanical Joints and Fittings Principally of Unplasticized PVC | |
| Joints and fittings for use with unplasticized PVC pressure pipes - Part 3: Specification for solvent cement | |
| Lathe Spindle Noses and Faceplates Part 2: Bayonet Type | |
| Limits and fits - Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters... | |
| Machine Screws and Machine Screw Nuts (B.S.W. and B.S.F. Threads) | |
| Marking of Wooden Hatchway Covers | |
| Metallic Tube Connectors for Fluid Power and General Use - Part 1: Split Collet Compression Fittings | |
| Method for Calculating viscosity index of petroleum products and lubricants from kinematic viscosity | |
| Method for Determination of Carbon Residue of Petroleum Products (Ramsbottom Method) | |
| Method for determination of smoke point of kerosine | |
| Method for determination of the Kappa number of pulp (degree of delignification) | |
| Method for Determining Hardenability of Steel by End Quenching (Jominy Test) | |
| Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR) | |
| Method for Measurement of UV-A Radiation (Black Light) Used in Non-Destructive Testing | |
| Method for penetrant testing of welded or brazed joints in metals | |
| Method for specifying Electroplated coatings of gold and gold alloys - Part 2: Gold and gold alloys for decorative and protective purposes | |
| Method for Specifying Electroplated Coatings of Gold and Gold Alloys Part 1: Gold and Gold Alloys for Engineering Purposes | |
| Method for the determination of Arsenic - (Silver diethyldithiocarbama te procedure) | |
| Method for the Determination of the Resistance to Tearing of Woven Fabrics by the Wing-Rip Technique | |
| Method for the Extraction from Pulps of Materials Soluble in Dichloromethane | |
| Method for Vickers Hardness Test Part 1: Testing of Metals | |
| Method for Vickers Hardness Test Part 2: Verification of the Testing Machine | |
| Methods for Analysis of Oilseed Residues - Part 13: Determination of Oil Content (Rapid Extraction Method) | |
| Methods for Analysis of Oilseed Residues - Part 14: Simultaneous Detemination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectroscopy | |
| Methods for Analysis of oilseed residues - Part 1: Determination of moisture and volatile matter content | |
| Methods for Analysis of oilseed residues - Part 2: Determination of total ash | |
| Methods for Analysis of oilseed residues - Part 5: Determination of diethyl ether extract | |
| Methods for Analysis of Oilseed Residues Part 12: Determination of Glucosinolates Content by High-Performance Liquid Chromatography | |
| Methods for Analysis of Oilseed Residues Part 8: Determination of Total Isothiocyanate Content and Vinylthiooxazolidone Content | |
| Methods for Analysis of Oilseed Residues Part 9: Preparation of Test Samples | |
| Methods for Analysis of Oilseeds Part 10: Determination of Chlorophyll Content of Rapeseed | |
| Methods for analysis of the elastomeric thread in an elastic fabric | |
| Methods for Assessing the Performance Characteristics of Ultrasonic Flaw Detection Equipment Part 1: Overall Performance On-Site Methods | |
| Methods for Assessing the Performance Characteristics of Ultrasonic Flaw Detection Equipment Part 2: Electrical Performance | |
| Methods for Assessing the Performance Characteristics of Ultrasonic Flaw Detection Equipment Part 3: Guidance on the In-Service Monitoring of Probes (Excluding Immersion Probes) | |
| Methods for Determination of Folding Endurance of Paper | |
| Methods for Determination of Water in Crude Petroleum, Petroleum Products and Bituminous Materials by Distillation Part 1: Method for Crude Petroleum | |
| Methods for determining optical properties of pulp, paper and board. Part 2: Measurement of diffuse blue reflectance factor (ISO brightness) of paper and board | |
| Methods for determining optical properties of pulp, paper and board. Part 3: Determination of opacity (paper backing) of paper and board by the diffuse reflectance method | |
| Methods for determining optical properties of pulp, paper and board. Part 4: Measurement of diffuse blue reflectance factor (ISO brightness) of pulps | |
| Methods for the Analysis of Oilseeds Part 3: Determination of Moisture and Volatile Matter Content | |
| Methods for the Analysis of Oilseeds Part 6: Determination of Oil, Moisture and Volatile Matter, and Protein by Infrared Reflectance | |
| Methods for the Analysis of Oilseeds Part 7: Determination of Oil by Nuclear Magnetic Resonance | |
| Methods for the Analysis of Oilseeds Part 8: Check of the Calibration of Moisture Meters | |
| Methods for the Analysis of Oilseeds Part 9: Determination of Glucosinolates Content of Rapeseed by High Performance Liquid Chromatography | |
| Methods for the analysis of oilseeds. Determination of acidity of oil | |
| Methods for the analysis of oilseeds. Determination of hexane extract (or light petroleum extract), called 'oil content' | |
| Methods for the analysis of oilseeds. Determination of impurities content | |
| Methods for the analysis of oilseeds. Reduction of contract samples to analysis samples | |
| Methods for the determination of specific surface of powders. Calculation from the particle size distribution | |
| Methods for the determination of the austenitic grain size of steel | |
| Methods of Measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers | |
| Methods of Measurement of the electrical properties of electronic tubes and valves (Excluding microwave devices) - Part 1: Essential conditions for measuring equivalent input and output admittances | |
| Methods of Measuring the performance of laboratory electric resistance furnaces | |
| Methods of microbiological examination for dairy purposes. Methods of microbiological examination of milk products | |
| Methods of Microbiological Examinations for Dairy Purposes | |
| Methods of Sampling and Test for Liquefied Anhydrous Ammonia | |
| Methods of test for Cereals and pulses - Part 12: Determination of wet gluten in wheat flour | |
| Methods of Test for Cereals and Pulses - Part 19: Determination of Protein Quality of Wheat by the Sodium Dodecyl Sulphate (SDS) Test | |
| Methods of Test for Cereals and Pulses - Part 20: Determination of Water Absorption of Flour and Rheological Properties of Doughs Using a Farinograph | |
| Methods of test for Cereals and pulses - Part 28: Determination of viscosity of flour using an amylograph | |
| Methods of test for Cereals and pulses \x97 Part 18: Determination of hidden insect infestation | |
| Methods of Test for Cereals and Pulses Part 10: Determination of Ash of Cereals and Milled Cereal Products | |
| Methods of Test for Cereals and Pulses Part 11: Determination of Glycosidic Hydrocyanic Acid in Pulses | |
| Methods of Test for Cereals and Pulses Part 13: Determination of Sedimentation Index for Wheat (Zeleny Test) | |
| Methods of Test for Cereals and Pulses Part 14: Determination of Alpha-Amylase Activity in Cereals and Cereal Products (Colorimetric Method) Obsolete: Method not Used and Out of Date | |
| Methods of Test for Cereals and Pulses Part 15: Determination of Moisture Content of Maize (Milled and Whole) | |
| Methods of Test for Cereals and Pulses Part 16: Determination of Dry Gluten in Wheat Flour | |
| Methods of Test for Cereals and Pulses Part 1: Determination of the Mass of 1000 Grains | |
| Methods of Test for Cereals and Pulses Part 21: Determination of Rheological Properties of Doughs Using an Extensograph | |
| Methods of Test for Cereals and Pulses Part 22: Determination of Water Absorption of Flour and Rheological Properties of Doughs Using a Valorigraph | |
| Methods of Test for Cereals and Pulses Part 23: Determination of Bulk Density of Cereals, Called 'Mass per Hectolitre' | |
| Methods of Test for Cereals and Pulses Part 24: Method of Checking the Calibration of Moisture Meters for Cereals | |
| Methods of Test for Cereals and Pulses Part 25: Determination of Wet Gluten Content in Wheat Flour by Mechanical Means | |
| Methods of Test for Cereals and Pulses Part 26: Measurement of Temperature of Grain During Bulk Storage | |
| Methods of Test for Cereals and Pulses Part 27: Determination of Rheological Properties of Doughs Using an Alveograph | |
| Methods of Test for Cereals and Pulses Part 29: Determination of Impurities of Animal Origin in Wheat Flour and Durum Wheat Semolina | |
| Methods of Test for Cereals and Pulses Part 30: Identification of Wheat Varieties by Electrophoresis | |
| Methods of Test for Cereals and Pulses Part 31: Determination of Yellow Pigment Content in Durum Wheat Flour and Semolina | |
| Methods of Test for Cereals and Pulses Part 32: Determination of Bulk Density of Cereals, Called "Mass Per Hectolitre" (Routine Method) | |
| Methods of Test for Cereals and Pulses Part 9: Determination of Falling Number of Cereals | |
| Methods of test for cereals and pulses. Determination of impurities in pulses | |
| Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (basic reference method) | |
| Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (routine method) | |
| Methods of test for cereals and pulses. Determination of size of pulses | |
| Methods of test for cereals and pulses. Tests for foreign odours in pulses | |
| Methods of test for cereals and pulses. Tests for infestation of pulses by insects | |
| Methods of test for cereals and pulses. Tests of species and variety of pulses | |
| Methods of test for determining synchronous machine quantities | |
| Methods of test for Flexible cellular materials - Part 7: Method 17. Determination of tear strength of flexible cellular material with an integral skin | |
| Methods of Test for Flexible Cellular Materials Part 1: Methods 1 to 6 | |
| Methods of Test for Flexible Cellular Materials Part 2: Method 7, Indentation Hardness Tests | |
| Methods of Test for Flexible Cellular Materials Part 4: Method 10. Determination of Solvent Swelling Method 11. Humidity Ageing at an Elevated Temperature Method 12. Heat Ageing | |
| Methods of Test for Flexible Cellular Materials Part 5: Method 13. Test for Dynamic Fatigue by Constant Load Pounding | |
| Methods of Test for Flexible Cellular Materials Part 7. Method 17. Determination of tear strength of flexible cellular material with an integral skin | |
| Methods of test for flexible cellular materials. Method 14. Preparation of water extract. Method 15. Determination of tear strength. Method 16. Determination of air flow value | |
| Methods of test for flexible cellular materials. Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance | |
| Methods of Test for Formic Acid | |
| Methods of Test for Meat and Meat Products - Part 15: Detection of Polyphosphates | |
| Methods of Test for Meat and Meat Products - Part 17: Determination of Chloramphenicol Content (Liquid Chromatographic Method) | |
| Methods of Test for Meat and Meat Products - Part 18: Determination of Starch and Glucose Contents (Enzymatic Method) | |
| Methods of Test for Meat and Meat Products - Part 2: Determination of Nitrogen Content (Reference Method) | |
| Methods of test for Meat and meat products - Part 4: Determination of total fat content | |
| Methods of Test for Meat and Meat Products Part 10. Determination of Total Phosphorus Content | |
| Methods of Test for Meat and Meat Products Part 11: Determination of L(-)-Hydroxyproline Content (Reference Method) | |
| Methods of Test for Meat and Meat Products Part 12: Determination of Starch Content of Meat Products (Reference Method) | |
| Methods of Test for Meat and Meat Products Part 13: Determination of Gluconodelta Lactone Content (Reference Method) | |
| Methods of Test for Meat and Meat Products Part 14: Determination of L(+)-Glutamic Acid Content (Reference Method) | |
| Methods of Test for Meat and Meat Products Part 16: Determination of Chloride Content (Potentiometric Method) | |
| Methods of Test for Meat and Meat Products Part 1: Determination of Ash (Reference Method) | |
| Methods of Test for Meat and Meat Products Part 3: Determination of Moisture Content | |
| Methods of Test for Meat and Meat Products Part 5: Determination of Free Fat Content | |
| Methods of Test for Meat and Meat Products Part 6: Determination of Chloride Content | |
| Methods of Test for Nitric Acid | |
| Methods of Test for Resistance to Air and Water Penetration - Part 2: Permeable Walling Constructions (Water Penetration) | |
| Methods of Test for Resistance to Air and Water Penetration Part 1: Windows and Structural Gasket Glazing Systems | |
| Methods of Test for Rigid Cellular Materials - Part 4: Method 14. Determination of Flexural Properties | |
| Methods of Test for Rigid Cellular Materials Part 1: Methods 1-5 | |
| Methods of Test for Rigid Cellular Materials Part 2: Methods 6-10 | |
| Methods of test for rigid cellular materials. Methods 11 to 13 | |
| Methods of Test for Sodium Hypochlorite Solution | |
| Methods of test for sodium tripolyphosphate ( | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) - Part 1: Determination of Matter Insoluble in Water in Sodium Tripolyphosphate | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use - Part 11: Separation by Column Chromatography and Determination of the Different Phosphate Forms... | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use - Part 13: Condensed Phosphates for Industrial Use (Including Foodstuffs) - Determination of Calcium... | |
| Methods of test for Sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use \x97 Part 5: Determination of particle size distribution | |
| Methods of test for Sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use \x97 Part 6: Estimation of pyrophosphate content of sodium pyrophosphate | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 10: Determination of Total Phosphorus (V) Oxide Content; Quinoline Phosphomolybdate Gravimetric Method | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 12: Condensed Phosphates for Industrial Use (Including Foodstuffs), Determination of Arsenic Content: Silver... | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 15: Condensed Phosphates for Industrial Use (Including Foodstuffs) Determination of Oxides of Nitrogen... | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 4: Determination of Loss on Ignition | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 7: Estimation of Tripolyphosphate (Triphosphate) Content of Sodium Tripolyphosphate | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 8: Determination of Orthophosphate Content | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 9: Determination of Fluorine Content | |
| Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate(Tetras odium Pyrophosphate) for Industrial Use Part 2: Measurement of pH Value of Sodium Tripolyphosphate | |
| Methods of Test for the Stretch and Recovery Properties of Fabrics | |
| Methods of test for urea | |
| Methods of test Meat and meat products - Part 8: Determination of nitrite content | |
| Methods of test Meat and meat products - Part 9: Measurement of pH | |
| Methods of test Meat and meat products \x97 Part 7: Determination of nitrate content | |
| Metric units Methods of test for printing inks (Resistance of prints to various physical and chemical agents) | |
| Microbiological Examination for Dairy Purposes - Part 3. Methods for Detection and/or Enumeration of Specific Groups of Microorganisms - Section 3.5: Enumeration of Proteolytic Microorganisms | |
| Microbiological Examination for Dairy Purposes - Part 3: Methods for Detection and or Enumeration of Specific Groups of Microorganisms - Section 3.4: Enumeration of Lipolytic Microorganisms - Subsec 3.4.2: Tributyrin... | |
| Microbiological Examination for Dairy Purposes - Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms - Section 3.11: Detection and Enumeration of Faecal Streptococci | |
| Microbiological Examination for Dairy Purposes - Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms - Section 3.9: Detection of Salmonella - Subsec 3.9.2: Screening Method Using... | |
| Microbiological Examination for Dairy Purposes - Part 4: Methods for Assessment of Hygienic Conditions | |
| Microbiological Examination for Dairy Purposes - Part 5: Ancillary Methods - Section 5.3: Test for Inhibitory Substances | |
| Microbiological examination for dairy purposes - Part 5: Ancillary methods Section 5.2 Methylene blue reduction test for cream and ice cream | |
| Microbiological Examination for Dairy Purposes Part 1: Guide to General Procedures Section 1.2: Diluents, Media and Apparatus and Their Preparation and Sterilization | |
| Microbiological Examination for Dairy Purposes Part 1: Guide to General Procedures Section 1.3: Procedures for Obtaining Incubation Conditions | |
| Microbiological Examination for Dairy Purposes Part 2: Methods for General Application for Enumeration of Microorganisms Sec 2.6: Enumeration of Microorganisms by Most Probable Number Technique | |
| Microbiological Examination for Dairy Purposes Part 2: Methods of General Application for Enumeration of Microorganisms Sec 2.1: Enumeration of Microorganisms by Poured Plate Technique for Colony Count | |
| Microbiological Examination for Dairy Purposes Part 2: Methods of General Application for Enumeration of Microorganisms Sec 2.2: Enumeration of Microorganisms in Milk by Plate Loop Technique for Colony Count | |
| Microbiological Examination for Dairy Purposes Part 2: Methods of General Application for Enumeration of Microorganisms Sec 2.3: Enumeration of Microorganisms by Surface Plate Technique for Colony Count | |
| Microbiological Examination for Dairy Purposes Part 2: Methods of General Application for Enumeration of Microorganisms Sec 2.4: Enumeration of Bacteria by Roll Tube Technique | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Sec 3.10: Staphylococcus Aureus Subsection 3.10.1: Enumeration Using the Colony Count Technique | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Sec 3.10: Staphylococcus Aureus Subsection 3.10.2: Detection | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.10: Staphylo-Coccus Aureus Subsection 3.10.3: Enumeration Using the Most Probable Number Technique... | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.12: Enumeration of Bacillus Cereus | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.13: Enumeration of Clostridium Perfringens | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.14: Enumeration of Mesophilic Microorganisms | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.15: Detection of Listeria Monocytogenes | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.3: Enumeration of Aerobic Bacterial Spores | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.4: Enumeration of Lipolytic Microorganisms Subsection 3.4.1 Victoria Blue Method | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.7: Enumeration of Coliform Bacteria | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.8: Enumeration of Presumptive Esherichia Coli | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.9: Detection of Salmonella Subsection 3.9.1: Reference Method | |
| Microbiological Examination for Dairy Purposes Part 3: Methods for Detection and/or Enumerations of Specific Groups of Microorganisms Sec 3.1: Enumeration of Psychrotrophic Microorganisms | |
| Microbiological Examination for Dairy Purposes Part 3: Methods Part 3: Methods for Detection and/or Enumeration of Specific Groups of Microorganisms Section 3.6: Enumeration of Yeasts and Moulds | |
| Microbiological Examination for Dairy Purposes Part 5: Ancillary Methods Section 5.1: Resazurin Reduction Test for Raw Milk | |
| Microbiological examination for dairy purposes. General introduction | |
| Microbiological examination for dairy purposes. Guide to general procedures. Sampling and preparation of sample | |
| Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of thermoduric microorganisms (bacteria) | |
| Microbiological examination for dairy purposes. Methods of general application for enumeration of microorganisms. Enumeration of bacteria by direct microscopic counts | |
| Occupational health and safety management systems - General guidelines for the application of ISO 45001 Part 2: Risks and opportunities | |
| Occupational health and safety management systems \x96 General guidelines for the application of ISO 45001 Part 1: Guidance on managing occupational health | |
| Occupational health and safety management systems \x96 General guidelines for the application of ISO 45001 Part 3: Guidance on incident investigation | |
| Occupational health and safety management systems Part 0: General guidelines for the application of ISO 45001 | |
| Occupational health and safety management systems | |
| Plain Bearings. Metric Series Part 5: Dimensions, Tolerances and Methods of Checking Thin-Walled Half Bearings | |
| Plain Bearings: Metric Series - Part 1: Sintered Bushes - Dimensions and Tolerances | |
| Plain bearings: metric series - Part 6: Specification for dimensions and tolerances of ring type thrust washers made from strip | |
| Plain bearings: metric series - Part 7: Specification for dimensions and tolerances of pressed bimetallic half thrust washers | |
| Plain bearings: metric series - Part 8: Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings | |
| Plain Bearings: Metric Series Part 3: Copper Alloy Bushes | |
| Plain Bearings: Metric Series Part 9: Checking the Outside Diameter of Wrapped Bushes | |
| Plain dead-soft copper strip, bars, and rods for the windings of electrical machines | |
| Portable Pneumatic Grinding Machines | |
| Quantitative Analysis of Fibre Mixtures | |
| Reach and Straddle Fork Lift Trucks. Stability Tests | |
| Recommendations for Buffering on Hospital Vehicles Such as Trolleys | |
| Recommendations for General Landscape Operations (Excluding Hard Surfaces) | |
| Recommendations for metric basic sizes for metal wire | |
| RECOMMENDATIONS FOR NON-DESTRUCTIVE METHODS OF TEST FOR CONCRETE Part 2. Strain gauges for concrete investigations | |
| Recommendations for non-destructive methods of test for concrete. Gamma radiography of concrete | |
| Recommendations for non-destructive methods of test for concrete. Measurement of the velocity of ultrasonic pulses in concrete | |
| Recommendations for non-destructive methods of test for concrete. Surface hardness methods | |
| Recommendations for preparation of drawings for optical elements and systems | |
| Recommendations for Safety of Powered Industrial Trucks - Part 2: Operation and Maintenance | |
| Recommendations for the Design of Metal Articles That Are to Be Coated | |
| Recommendations for the Detection and Estimation of Nitrogenous Treating Agents in Paper | |
| Recommendations for the Flame Spraying of Ceramic and Cement Coatings | |
| Recommendations for the Selection, Use and Maintenance of Respiratory Protective Equipment | |
| Rosin-Cored Solder Wire 'Activated' and 'Non-Activated' (Non-Corrosive) | |
| Safety Aspects in the Design, Construction and Installation of Refrigerating Appliances and Systems | |
| Safety Harnesses and Safety Lines for Use by Children in Yachts | |
| Schedule of Tests for Gasification and Reforming Plants Using Hydrocarbon Feedstocks | |
| Screw Conveyors Part 3: Method for Calculating Drive Power | |
| Size of Sawn and Processed Softwood | |
| Slotted Angles | |
| Sodium Chloride Particulate Test for Respirator Filters | |
| Solderable Tin or Tin-Lead Coated Wires for Component Terminations | |
| Solid drawn steel air receivers (not intended for transport) | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /11: 5454 Forging Stock and Forgings | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /12: 5454 Bar, Extruded Round Tube and Sections | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys For General Engineering Purposes /13: 5554 Welding Wire | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /14: 7020 Plate, Sheet and Strip | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /15: 7020 Bar, Extruded Round Tube and Sections | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /16: Specification for Sheet and Strip 8011 Material (BS EN 485: Parts 1 - 4, BS EN... | |
| Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /4: 6463 Solid Extruded Bars and Sections Suitable for for Bright Trim/ Reflector Applications | |
| Specification (supplementary series) for wrought aluminium and aluminium alloys for general engineering purposes. NS 3105 Sheet and strip | |
| Specification (supplementary series) for wrought aluminium and aluminium alloys for general engineering purposes. NS 41 Sheet and strip | |
| Specification (supplementary series) for wrought aluminium and aluminium alloys for general engineering purposes. NS 51 Plate, sheet and strip | |
| Specification for 9 track magnetic tape for data interchange. Tape recorded at 31.5 rows per millimetre (800 rows per inch), NRZI | |
| Specification for 9 track magnetic tape for data interchange. Tape recorded at 63 rows per millimetre (1600 rows per inch), phase encoded | |
| Specification for Anaesthetic and analgesic machines - Part 1: Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers | |
| Specification for Apparatus for Measurement of Packed Red Cell Volume | |
| Specification for apparatus for physical methods of gas analysis. Part 1: Infra-red gas analysers for industrial use | |
| Specification for appliance couplers for household and similar general purposes | |
| Specification for baths for domestic purposes made from cast acrylic sheet | |
| Specification for Bending Dimensions and Scheduling of Reinforcement for Concrete | |
| Specification for capacitor tissue paper | |
| Specification for Car Parking Control Equipment | |
| Specification for Cold Worked High Tensile Alloy Steel Bars For Prestressed Concrete | |
| Specification for cold worked steel bars for the reinforcement of concrete | |
| Specification for Compounding Ingredients for Rubber Test Mixes | |
| Specification for Copper salts for electroplating | |
| Specification for Crinkle washers \x97 For general engineering purposes \x97 Metric series | |
| Specification for current-operated earth-leakage circuit-breakers | |
| Specification for dental casting gold alloys | |
| Specification for dental elastic impression materials. Alginate impression material | |
| Specification for dental elastic impression materials. Elastomeric impression material | |
| Specification for Dental Impression Pastes (Zinc Oxide Type) | |
| Specification for Design and construction of electric hoists for both passengers and materials | |
| Specification for dimensions for softwood. Small resawn sections | |
| Specification for Distribution assemblies for reduced low voltage electricity supplies for construction and building sites | |
| Specification for documentation to be supplied with electronic measuring apparatus | |
| Specification for electric catering equipment for educational establishments (L.A.S.M.E.C. modular units) | |
| Specification for Electrically operated blood storage refrigerators | |
| Specification for Electroplated Coatings of Gold and Gold Alloy | |
| Specification for Engineers' Steel Measuring Rules | |
| Specification for Eyebolts for Lifting Purposes | |
| Specification for Fibrous Gland Packings | |
| Specification for Filing Cabinets and Suspended Filing Pockets | |
| Specification for Flanges and Bolting for Pipes, Valves and Fittings Metric Series Part 1. Ferrous | |
| Specification for gauge blocks and accessories. Accessories | |
| Specification for High strength friction grip bolts and associated nuts and washers for structural engineering metric series - Part 2: Higher grade bolts and nuts and general grade washers | |
| Specification for High Strength Friction Grip Bolts and Associated Nuts and Washers for Structural Engineering Metric Series Part 1: General Grade | |
| Specification for High Strength Friction Grip Bolts and Associated Nuts and Washers for Structural Engineering Part 3. Higher Grade Bolts (Waisted Shank), Nuts and General Grade Washers | |
| Specification for hot rolled steel bars for the reinforcement of concrete | |
| Specification for humidifiers for use with breathing machines | |
| Specification for industrial argon | |
| Specification for industrial nitrogen | |
| Specification for Industrial Oxygen | |
| Specification for ISO Limits and Fits Part 3: Working Limits on Untoleranced Dimensions | |
| Specification for Joints and fittings for use with unplasticized PVC pressure pipes - Part 1: Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable... | |
| Specification for Lathe Spindle Noses and Faceplates - Part 1: Types "A" and "Camlock" | |
| Specification for Liquid soap | |
| Specification for litter bins | |
| Specification for lubrication symbols | |
| Specification for machine cut gears. A. Helical and straight spur | |
| Specification for Measuring instruments for constructional works - Part 1: Metric graduation and figuring of instruments for linear measurement | |
| Specification for Metal washers for general engineering purposes metric series | |
| Specification for Metric Gauge Blocks - Part 1: Gauge Blocks | |
| Specification for Phenol-Formaldehyde Resin-Bonded Cork Jointing | |
| Specification for Plain bearings: metric series - Part 2: Solid plastics bushes | |
| Specification for Plain bearings: metric series Part 4. Dimensions, tolerances and methods of checking wrapped bushes | |
| Specification for polytetrafluoroethyl ene (PTFE) rod | |
| Specification for Precast Terrazzo Units | |
| Specification for Principal dimensions of hand-operated stillage trucks | |
| Specification for protective skull caps for jockeys | |
| Specification for Pulley blocks for use with natural and synthetic fibre ropes | |
| Specification for rated capacities of fork lift trucks | |
| Specification for Rigging Screws and Turnbuckles for General Engineering, Lifting Purposes and Pipe Hanger Appliances | |
| Specification for Riveted steel air receivers | |
| Specification for rotating electrical machinery. General data. Dimensions of brushes and brush holders for electrical machines | |
| Specification for Safety Requirements for Laboratory Centrifuges | |
| Specification for School Exercise Books and Papers | |
| Specification for screw conveyors. Portable and mobile tubular type (augers) for agricultural and light industrial use | |
| Specification for screw conveyors. Trough type for industrial use | |
| Specification for Screwed Studs for General Purposes - Metric series | |
| Specification for Semiconductor Rectifier Equipments | |
| Specification For Spring Washers for General Engineering and Automobile Purposes - Metric Series | |
| Specification for Spur and Helical Gears Part 1: Basic Rack Form, Pitches and Accuracy (Diametral Pitch Series) | |
| Specification for stationary batteries (lead-acid Plante positive type) for general electrical purposes | |
| Specification for Straight Mineral Lubricating Oils | |
| Specification for strontium chromate for paints | |
| Specification for supplementary series Wrought aluminium and aluminium alloys \x97 For general engineering purposes \x97 5454 Drawn tube | |
| Specification for Tapping of Holes to Receive Wire Thread Inserts (ISO Metric Threads) | |
| Specification for Terminals - For electrical apparatus - For railway signalling purposes | |
| Specification for textile machinery and accessories: definition of left and right sides. Part 1: Spinning machinery | |
| Specification for textile machinery and accessories: definition of left and right sides. Part 2: Pirn winders and cross winders | |
| Specification for textile machinery and accessories: definition of left and right sides. Part 3: Weaving preparatory machines | |
| Specification for textile machinery and accessories: definition of left and right sides. Part 4: Weaving looms | |
| Specification for textile machinery and accessories: definition of left and right sides. Part 5: Dyeing and finishing machines | |
| Specification for The designation in the tex system of netting yarns for fishing nets | |
| Specification for The Overall Internal Height of the Lathe Tool Posts | |
| Specification for the rating of industrial tractors | |
| Specification for the use of structural steel in building. Imperial units | |
| Specification for the use of structural steel in building. Recommendations for design | |
| Specification for Weldable Structural Steels Part 2. Metric Units | |
| Specification for Weldable Structural Steels | |
| Specification for Woodcutting bandsaw blades | |
| Specification for Woodworking machines - Part 1: Components | |
| Specification for Woodworking Machines \x97 Part 3: Machine Sizes and Capacities | |
| Specification for Woodworking Machines Part 2. Accuracy Tests Section 12. Routing Machines | |
| Specification for Woodworking Machines Part 2. Accuracy Tests Section 13. Turning Lathes | |
| Specification for Woven elastic webbing with natural rubber for men's trunk tops | |
| Specification for X-ray film cassettes (flat, rigid type) | |
| Specification Raw Natural Rubber | |
| Spur and Helical Gears - Part 3: Method for Calculation of Contact and Root Bending Stress Limitations for Metallic Involute Gears | |
| Spur and Helical Gears Part 2: Basic Rack Form, Modules and Accuracy (1 to 50 Metric Module) | |
| Steel Fabric for the Reinforcement of Concrete | |
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification | |
| Tensile Properties of Paper and Board Part 2: Constant Rate of Elongation Method | |
| Test Charts for Determining Distance Visual Activity | |
| Testing Zinc Coatings on Steel Wire and for Quality Requirements | |
| Textile Machinery and Accessories: Working Widths Part 1: Cotton Spinning Machinery | |
| Textile Machinery and Accessories: Working Widths Part 3: Maximum Usable Widths of Cone Sectional Warping Machines | |
| Textile machinery and accessories: working widths. Part 4: Specification for maximum usable width for warp sizing machines | |
| The Performance of Prestressing Anchorages for Post-Tensioned Construction | |
| The use of structural steel in building | |
| Topping Knives for Sugar Beet Harvesters | |
| Tracked Changes (Redline) - Fire - Vocabulary | |
| Tracked Changes (Redline) - Steel fabric for the reinforcement of concrete - Specification | |
| Transliteration of Arabic Characters | |
| Transmission Standards for FM Sound Broadcasting at VHF | |
| Unsintered PTFE Tape for Thread Sealing Applications | |
| Use of Structural Steel in Building Part 2: Metric Units | |
| Visual acuity test types. Part 1: Specification for test charts for clinically determining distance visual acuity | |
| Water Cooling Towers - Part 2: Methods for Performance Testing | |
| Water Cooling Towers - Part 3: Code of Practice for Thermal and Functional Design | |
| Water Cooling Towers Part 1: Glossary of Terms | |
| Water Cooling Towers Part 4: Structural Design of Cooling Towers | |
| Woodworking Machines - Part 22: Specification for Double-End Tenoning Machines | |
| Woodworking Machines - Part 24: Nomenclature for Multi-Spindle Boring Machines | |
| Woodworking Machines - Part 25: Nomenclature for Universal Tool and Cutter Sharpeners | |
| Woodworking Machines - Part 26: Nomenclature for Bandsaw Blade Sharpening Machines | |
| Woodworking machines - Part 27: Nomenclature for disc sanding machines with spindle in fixed position | |
| Woodworking Machines - Part 28: Nomenclature for Curtain Coating Machines | |
| Woodworking Machines - Part 30: Nomenclature for Hand-Loading Veneering Presses for Flat Surfaces | |
| Woodworking machines - Part 31: Nomenclature for crosswise veneer splicing machines | |
| Woodworking Machines - Part 32: Nomenclature for Single-End Edge Bonding Machines | |
| Woodworking Machines - Part 33: Nomenclature for Veneer Slicing Machines | |
| Woodworking Machines - Part 34: Nomenclature for Mortising Machines with Oscillating Tool Action | |
| Woodworking Machines - Part 35: Nomenclature for Machines for Production of Core Stock from Laths | |
| Woodworking Machines - Part 36: Nomenclature for Single-End Tenoning Machines with Several Spindles | |
| Woodworking Machines - Part 37: Nomenclature for Horizontal Shredding Machines for Wood, Wood Production, Quadruple Effect | |
| Woodworking Machines - Part 38: Nomenclature for Vertical Shredding Machines for Wood, Wood Production, with Hydraulic Clamping | |
| Woodworking machines - Part 39: Nomenclature for circular sawing machines for building sites | |
| Woodworking Machines - Part 40: Nomenclature for Lifting Tables and Stages | |
| Woodworking Machines - Part 4: Specification for Table Bandsawing Machines | |
| Woodworking Machines - Part 5: Single Blade Circular Saw Benches with or Without Travelling Table | |
| Woodworking Machines - Part 6: Specification for Single Spindle Moulding Machines | |
| Woodworking Machines Part 0: Classification of Woodworking Machines and Auxiliary Machines Used for Woodworking | |
| Woodworking Machines Part 10: Surface Planing Machines with Cutter-Block for One-Sided Dressing | |
| Woodworking Machines Part 11: Single Spindle Boring Machines | |
| Woodworking Machines Part 12: Slot Mortising Machines | |
| Woodworking Machines Part 13: Two - , Three - and - Four - Side Moulding Machines | |
| Woodworking Machines Part 14: Routing Machines | |
| Woodworking Machines Part 15: Veneer Pack Edge Shears | |
| Woodworking Machines Part 16: Specification for Single Chain Mortising Machines | |
| Woodworking Machines Part 17: Radial Circular Saws | |
| Woodworking Machines Part 18: Single Blade Stroke Circular Sawing Machines for Lengthwise Cutting of Solid Woods and Panels | |
| Woodworking Machines Part 19: Double Edging Precision Circular Sawing Machines | |
| Woodworking Machines Part 20: Single Blade Circular Sawing Machines with Travelling Table | |
| Woodworking Machines Part 21: Turning Lathes | |
| Woodworking Machines Part 23: Nomenclature for Narrow Belt Sanding Machines with Sliding Table or Frame | |
| Woodworking Machines Part 29: Nomenclature for Wide Belt Sanding Machines | |
| Woodworking Machines Part 7: Thickness Planing Machines with Rotary Cutter Block for One-side Dressing | |
| Woodworking Machines Part 8: Planing Machines for Two -, Three - or Four - Side Dressing | |
| Woodworking Machines Part 9: Surface Planing and Thicknessing Machines | |
| Wrought aluminium and aluminium alloys For general engineering purposes (Supplementory series) Aluminium alloy longitudinally welded tube |
| << Prev | Next >> |