Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
230
240
250
260
270
280
285
286
287
288
289
290
291
292
293
294
295
296
297
300
310
320
330
340
350
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 2: Section 2.14: Electric Soldering Irons | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 2: Section 2.19: Electric Firelighters | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 2: Section 2.26: Thermal Storage Electrical Room Heaters | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 2: Section 2.32: Mains- Operated Electric Lawnmowers | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 3: Complete Particular Specifications Sec 3.8: Food Waste Disposal Units | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 3: Complete Particular Specifications Section 3.13: Appliances for Skin or Hair Treatment | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 3: Complete Particular Specifications Section 3.14: Projectors | |
| 1972-1981 Edition. Specification for Safety of Household Electrical Appliances Part 3: Complete Particular Specifications Section 3.25: Battery Chargers | |
| Agricultural water troughs and water fittings - Part 1: Specification for water trough bodies, service boxes and water supply system | |
| Agricultural water troughs and water fittings - Part 2: Code of practice for installation and operation | |
| Alloy Steel Chain Slings | |
| ALUMINIUM ALLOY CONDUCTORS FOR OVERHEAD POWER TRANSMISSION | |
| Beams for warping, sizing and weaving of textile yarns Part 3: Specification for profile threads for weaver's beams | |
| Beams for Warping, Sizing and Weaving of Textile Yarns Part 4: Glossary of Terms for Winding Beams | |
| Beams for warping, sizing and weaving of textile yarns. Part 1: Specification for main dimensions of, and terminology for, warper's beams | |
| Beams for warping, sizing and weaving of textile yarns. Part 2: Specification for main dimensions of, and terminology for, weaver's beams | |
| Beams for Wrapping, Sizing and Weaving of Textile Yarns Part 5: Method of Classification of Flanges for Weaver's Beams, Warper's Beams and Sectional Beams | |
| Chemical Resistance of Glass Used in the Production of Laboratory Glassware Part 5: Method for Determination of Resistance of Glass to Attack by 6 mol/L Hydrochloric Acid at 100 Degrees... | |
| Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grains at 121\xb0C | |
| Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grains at 98\xb0C | |
| Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of the interior surfaces of glass containers | |
| Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali | |
| Chemical Resistance of Glass Used in the Production of Laboratory Glassware: Part 4: Methods for Determination of Hydrolytic Resistance of the Interior Surfaces of Glass Containers: Section 4.1: Determination by... | |
| Chemical Resistance of Glass Used in the Production of Laboratory Glassware: Part 4: Methods for Determination of Hydrolytic Resistance of the Interior Surfaces of Glass Containers: Section 4.2: Determination by... | |
| Code of safety requirements for children's toys and playthings | |
| Combustion modified flexible polyurethane cellular materials for loadbearing applications - Specification | |
| Compositional Requirements of Chemical Lead | |
| Dental Base Metal Casting Alloys Part 1: Specification for Denture Base Alloys | |
| Dental Base Metal Casting Alloys Part 2: Inlay, Crown and Bridge Alloys | |
| Dental Silicate Cement and Dental Silico-Phosphate Cement Part 1. Specification for Dental Silicate Cement (Hand-Mixed) | |
| Dental Silicate Cement and Dental Silico-Phosphate Cement Part 2: Dental Silico-Phosphate Cements (Hand Mixed) | |
| Dental Silicate Cement and Dental Silico-Phosphate Cement Part 3: Specification for Capsulated Cements | |
| Determination of Conductivity, pH, Water Soluble Matter, Chloride and Sulphate in Aqueous Extracts of Textile Materials | |
| Determination of Particle Size Distribution Part 3: Air Elutriation Methods | |
| Determination of Particle Size Distribution Part 5: Recommendations for Electrical Sensing Zone Method (The Coulter Principle) | |
| Determination of resistivity of metallic electrical conductor materials | |
| Determination of the Tensile Properties of Individual Textile Fibres | |
| Determination of Vapour Pressure of Liquefied Petroleum Gases (LPG Method)) | |
| Distant Indicating Thermometers for Ships' Refrigerated Cargo Spaces | |
| Drills and reamers - Part 3: Specification for the dimensions of core drills | |
| Drills and Reamers - Part 4: Specification for Dimensions of Reamers | |
| Drills and Reamers - Part 8: Spot Drills | |
| Drills and Reamers Part 5: Dimensions of Countersinks and Counterbores | |
| Drills and Reamers Part 6: Countersinks, 90 Degrees, with Parallel Shanks and Solid Pilots | |
| Drills and Reamers Part 7: Counterbores with Parallel Shanks and Solid Pilots | |
| Drills and reamers. Twist drill sizes superseding drill gauge and letter sizes | |
| Earth-Moving Machinery. Method for Locating the Centre of Gravity | |
| Electroplated Coatings on Threaded Components - Part 5: Tin on Copper and Copper Alloy (Including Brass) Components - Part 6: Silver on Copper and Copper Alloy (Including Brass) Components | |
| Electroplated Coatings on Threaded Components Part 1: Cadmium on Steel Components Part 2: Zinc on Steel Components | |
| Electroplated Coatings on Threaded Components Part 3: Nickel or Nickel Plus Chromium on Steel Components Part 4: Nickel or Nickel Plus Chromium on Copper and Copper Alloy (Including Brass) Components... | |
| Electroplated Coatings on Threaded Components Part 7: Thicker Platings for Threaded Components | |
| Flat Lifting Slings Part 2: Flat Woven Webbing Slings Made of Man-Made Fibre for General Service | |
| Flat Lifting Slings Part 3: Disposable Flat Lifting Slings | |
| Forks, Shovels and Spades | |
| Glass Urine Bottles (For Male Use) | |
| Glossary of Paper, Board, Pulp and Related Terms | |
| Glossary of Terms associated with refractory materials - Part 1: General and manufacturing | |
| Glossary of Terms associated with refractory materials - Part 2: Applications in the coke, glass, cement and other non-metallurgical industries | |
| Glossary of Terms associated with refractory materials - Part 3: Applications in the metallurgical industries | |
| Glossary of Terms of Relating to Sampling, Testing and Analysis of Solid Mineral Fuels | |
| Glossary of Terms Relating to Gas Chromatography | |
| Glossary of Terms Relating to the Manufacture and Use of Refractory Materials | |
| Glossary of Terms Used in Nuclear Science | |
| Glossary of Terms Used in the Glass Industry | |
| Grade 1-Phenyl-3-Pyrazol- Idinone (Phenidone) | |
| Graphical Symbols for Components of Servo-Mechanisms - Part 1: Transductors and Magnetic Amplifiers | |
| Graphical Symbols for Components of Servo-Mechanisms - Part 2: General Servo-Mechanisms | |
| Guide for Assessing Coke Screening Plant | |
| Guide for Large Scale Purchasing of Toilet Paper | |
| Hand-Made Shellac | |
| Hot-Applied Thermoplastic Road Marking Materials Part 2: Specification for Road Performance | |
| Hot-Applied Thermoplastic Road Marking Materials Part 3: Application of Material to Road Surfaces | |
| Hot-applied thermoplastic road marking materials. Specification for constituent materials and mixtures | |
| Identification of Contents of Industrial Gas Containers | |
| Identification of Exposed Colour Roll Film | |
| Incinerators Part 1: Standard Performance Requirements for Incineration Plant for the Destruction of Hospital Waste | |
| Incinerators Part 2: Methods of Test and Calculation for the Performance of Incineration Plant for the Destruction of Hospital Waste | |
| Incinerators Part 3: Method for Specifying Purchasers' Requirements for Incineration Plant for the Destruction of Hospital Waste | |
| Incinerators Part 4: Code of Practice for the Design Specification Installation and Commissioning of Incineration Plant for the Destruction of Hospital Waste | |
| Insulator and Conductor Fittings for Overhead Power Lines Part 1: Performance and General Requirements | |
| Insulator and Conductor Fittings for Overhead Power Lines Part 4: Locking Devices for Ball and Socket Couplings of String Insulator Units: Dimensions and Tests | |
| Knowledge management - Application of BS ISO 30401 - Guide | |
| Laboratory Furniture and Fittings - Part 2: Specification for Performance | |
| Laboratory Furniture and Fittings - Part 3: Recommendations for Design | |
| Laboratory Furniture and Fittings - Part 4: Recommendations for Installation | |
| Laboratory Furniture and Fittings Part 1: Introduction | |
| Lighting fittings for civil land aerodromes - Part 5: Specification for inset lighting units | |
| Lighting Fittings for Civil Land Aerodromes - Part 6: Specification for Obstacle Lighting Units | |
| Lighting Fittings for Civil Land Aerodromes Part 1: Lighting Units for Use in Precision Approach Path Indicator Systems | |
| Lighting Fittings for Civil Land Aerodromes Part 4: Elevated Lighting Units | |
| Liquid Driers for Oil Paints | |
| Management services Part 5. Guide to determination of exposure limits, recovery times and relaxation times in work measurement | |
| Measurement of Noise Emitted by Motor Vehicles | |
| Measurement of Particulate Emission Including Grit and Dust (Simplified Method) | |
| Medicine measures - Part 1: Specification for medicine measures of 50 mL total graduated capacity | |
| Medicine measures - Part 6: Specification for free-standing plastics medicine measuring spoons of 5 mL capacity | |
| Medicine Measures Part 7: Specification for Oral Syringes Delivering Doses of Less Than 5 mL | |
| Medicine measures. Plastics medicine measuring spoons of 5 ml capacity | |
| Method for Determination of bending length and flexural rigidity of fabrics | |
| Method for determination of grammage of paper and board | |
| Method for determination of moisture content of paper and board by the oven-drying method | |
| Method for Laboratory Evaluation of Disinfectant Activity of Quaternary Ammonium Compounds by Suspension Test Procedure | |
| Method for Measurement of the Equivalent Pore Size of Fabric (Bubble Pressure Test) | |
| Method for sampling for testing paper and board | |
| Method for testing the resistance of fabrics to water absorption (static immersion test) | |
| Method for the Conditioning of Paper and Board for Testing | |
| Method for The determination of aluminium in solders and white metal bearing alloys (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of antimony in ingot tin (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of antimony in solders and white metal bearing alloys (Volumetric: potassium bromate method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of arsenic in ingot tin, solders and white metal bearing alloys (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (Photometric method) \x97 Methods for the sampling and analysis of tin and tin alloys... | |
| Method for The determination of cadmium in solders and white metal bearing alloys (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of copper and lead in white metal bearing alloys (Electrodeposition method) - Methods for the sampling and analysis of tin and alloys | |
| Method for The determination of copper in high purity ingot tin (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of copper in ingot tin and tin-lead solders (photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (Photometric method) - Methods for the sampling and analysis of tin and tin alloys... | |
| Method for The determination of lead in ingot tin and tin-antimony solders (photometric method) | |
| Method for The determination of nickel in capping metal (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for the Determination of Oils, Fats and Waxes in Cotton | |
| Method for the determination of seam slippage of woven fabrics | |
| Method for The determination of silver in solders (Volumetric: ammonium thiocyanate method) Methods for the sampling and analysis of tin and tin alloys | |
| Method for the determination of tar acids in black and white disinfectant fluids | |
| Method for The determination of tin in solders (Nickel coil reduction method) | |
| Method for The determination of tin in white metal bearing alloys (Nickel coil reduction method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The determination of zinc in solders and white metal bearing alloys (Photometric method) - Methods for the sampling and analysis of tin and tin alloys | |
| Method for The sampling of ingot tin \x97 Methods for the sampling and analysis of tin and tin alloys | |
| Method for The sampling of white metal bearing alloy ingots - Methods for the sampling and analysis of tin and tin alloys | |
| Method of Sampling Superheated Steam from Steam Generating Units | |
| Method of Test for Temperature Coefficient of Resistance of Alloy Wire for Precision Resistors | |
| Methods for Determination of Particle Size Distribution - Part 1: Guide to Powder Sampling | |
| Methods for Determination of Particle Size Distribution - Part 8: Photon Correlation Spectroscopy | |
| Methods for Determination of Particle Size Distribution - Part 9: Recommendations for the Filter Blockage Method (Mesh Obscuration) | |
| Methods for determination of particle size distribution Part 2. Recommendations for gravitational liquid sedimentation methods for powders and suspensions | |
| Methods for Determination of Particle Size Distribution Part 4: Optical Microscope Method | |
| Methods for determination of particle size distribution. Part 6: Recommendations for centrifugal liquid sedimentation methods for powders and suspensions | |
| Methods for determination of particle size distribution. Part 7: Recommendations for single particle light interaction methods | |
| Methods for Testing pigments for paints - Part 0: General introduction | |
| Methods for Testing Pigments for Paints Part A7: Colorimetric Method for the Comparison of the Colours, in Full-Shade Systems, of White, Black and Coloured Pigments | |
| Methods for Testing Pigments for Paints Part B11: Determination of Solubility of Dyestuffs in Organic Solvents | |
| Methods for Testing pigments for paints Part B3: Determination of residue on sieve (water method, using a manual procedure) | |
| Methods for Testing Pigments for Paints Part B6: Determination of Matter Volatile at 105 Degrees C | |
| Methods for Testing Pigments for Paints Part B8: Determination of Density (Pyknometer Method) | |
| Methods for testing pigments for paints. Determination of residue on sieve (oil method using a palette knife) | |
| Methods for testing pigments for paints. Determination of residue on sieve (oil method using the automatic muller) | |
| Methods for Testing Pigments in Paints Part A1: Comparison of Colour | |
| Methods for Testing Pigments in Paints Part A4: Determination of the Relative Tinting Strength and Colour on Reduction of Coloured Pigments Using Visual Comparison | |
| Methods for Testing Pigments in Paints Part A5: Comparison of Lightening Power of White Pigments | |
| Methods for Testing Pigments in Paints Part A6: Determination of Relative Tinting Strength of Coloured Pigments and Relative Scattering Power of White Pigments Using a Photometer | |
| Methods for Testing Pigments in Paints Part B10: Determination of Tamped Volume and Apparent Density After Tamping | |
| Methods for Testing Pigments in Paints Part B4: Determination of Residue on Sieve (Water Method, Using a Mechanical Flushing Procedure) | |
| Methods for Testing Pigments in Paints Part B7: Determination of Oil Absorption Value | |
| Methods for Testing Pigments in Paints Part B9: Determination of Density Relative to Water (Using a Centrifuge) | |
| Methods for Testing Pigments in Paints Part C1: Determination of Matter Soluble in Water (Hot Extraction Method) | |
| Methods for Testing Pigments in Paints Part C2: Determination of Matter Soluble in Water (Cold Extraction Method) | |
| Methods for Testing Pigments in Paints Part C3: Determination of Acidity or Alkalinity of the Aqueous Extract | |
| Methods for Testing Pigments in Paints Part C4: Determination of pH Value of an Aqueous Suspension | |
| Methods for Testing Pigments in Paints Part C5: Determination of Resistivity of Aqueous Extract | |
| Methods for Testing Pigments in Paints Part C6: Determination of Water Soluble Sulphates, Chlorides and Nitrates | |
| Methods for Testing Pigments in Paints Part C7: Comparison of Resistance to Bleeding | |
| Methods for Testing Pigments in Paints Part C8: Comparison of Heat Stability | |
| Methods for the analysis of water-soluble coal-tar dyes permitted for use in foods | |
| Methods for the Measurement of Electrical Power and Energy in Acceptance Testing | |
| Methods for the sampling and analysis of tin and tin alloys - Part 21: Determination of high cadmium content of soft solders | |
| Methods for the Sampling and Analysis of Tin and Tin Alloys Part 12: Sampling of Solders | |
| Methods for the Sampling and Analysis of Tin and Tin Alloys Part 2: Determination of Tin in Ingot Tin (Aluminium Reduction Method) | |
| Methods for Thermal Testing of Domestic Solid Mineral Fuel Burning Appliances with Convection - Part 1: Flue Loss Method | |
| Methods for Thermal Testing of Domestic Solid Mineral Fuel Burning Appliances with Convection - Part 2: Hood Method | |
| Methods of Test for Coated Fabrics | |
| Methods of Test for Desiccants - Part 10: Determination of Bulk Density (Dry Basis) | |
| Methods of Test for Desiccants - Part 1: Sampling, and Preparation and Storage of Test Samples | |
| Methods of Test for Desiccants - Part 2: Determination of Moisture Content | |
| Methods of Test for Desiccants - Part 3: Determination of pH | |
| Methods of Test for Desiccants - Part 4: Determination of Water-Soluble Chlorides Content | |
| Methods of test for Desiccants - Part 5: Determination of water-soluble sulphates content | |
| Methods of Test for Desiccants - Part 6: Determination of Adsorptive Capacity | |
| Methods of Test for Desiccants - Part 7: Determination of Particle Size | |
| Methods of Test for Desiccants - Part 8: Estimation of Ammonia and Ammonium Compounds Content | |
| Methods of Test for Desiccants - Part 9: Determination of Cobalt Chloride Content | |
| Methods of Test for Desiccants Part 11: Determination of Friability and Dust Content | |
| Methods of Test for Dust in Filling Materials | |
| Methods of Test for Resistance Per Unit Length of Metallic Electrical Resistance Material | |
| Methods of Test for Synthetic Rubber Latices | |
| Methods of Testing Fusion Welds in Aluminium and Aluminium Alloys | |
| Methods of Testing Pigments in Paints Part A3: Comparison of Resistance to Light of Coloured Pigments of Similar Types to a Specified Light Source | |
| Non-reversible connectors and appliance inlets for portable electrical appliances (for circuits up to 250 V) - Part 1: Specification for 13 A connector and appliance inlet | |
| Observation and Gauge Glasses for Pressure Vessels | |
| Photographic Grade Aluminium Potassium Sulphate, Dodecahydrate (Potash Alum) | |
| Photographic Grade Ammonium Thiosulphate Solution | |
| Photographic Grade Benzotriazole | |
| Photographic Grade Potassium Bromide | |
| Photographic Grade Potassium Metabisulphate | |
| Photographic Grade Sodium Carbonate, Anhydrous | |
| Photographic Grade Sodium Hydroxide | |
| Photographic Grade Sodium Sulphite, Anhydrous | |
| Photographic Grade Sodium Tetraborate, Decahydrate (Borax) | |
| Photographic Grade Sodium Thiosulphate, Anhydrous | |
| Photographic Grade Sodium Thiosulphate, Crystalline | |
| Post Insulators of Ceramic Material or Glass for Nominal Voltages Greater Than 1000 V Part 1: Methods of Test | |
| Post Insulators of Ceramic Material or Glass for Nominal Voltages Greater Than 1000 V Part 2. Dimensions | |
| Post Insulators of Ceramic Material or Glass for Nominal Voltages Greater Than 1000 V Part 3: Guide to Insulator Practice | |
| Power Take-Off Shaft and Guards for Tractors and Machinery for Agriculture and Forestry - Part 3: Supplementary Requirements to Part 1 "Specification for Power Take-Off Drive Shafts" and to Part... | |
| Power take-off shafts and guards for tractors and machinery for agriculture and forestry \x97 Part 1: Specification for power take-off drive shafts | |
| Power Take-Off Shafts and Guards for Tractors and Machinery for Agriculture and Forestry Part 2: Methods for Testing Guards | |
| Presspaper for Electrical Purposes | |
| Recommendations for the design of glass vacuum desiccators | |
| Recommendations for the identification marking of pulpable paper and board (pernicious contraries) | |
| Record Inks - Part 2: Specification for Permanent Inks | |
| Record inks Part 1: Specification for blue-black inks | |
| Round strand steel wire ropes for lifts and hoists | |
| Safety of Household and Similar Electrical Appliance Part 202: Particular Requirements Section 202.4: Spin Extractors | |
| Safety of household and similar electrical appliances - Part 202: Particular requirements - Section 202.20 Battery-powered tooth-brushes and their charging and battery assemblies | |
| Safety of household and similar electrical appliances Part 102. Particular requirements Section 102.8 Electric shavers, hair clippers and similar appliances | |
| Safety of Household and Similar Electrical Appliances Part 102: Particular Requirements Section 102.13: Frying Pans, Deep Fat Fryers and Similar Appliances | |
| Safety of Household and Similar Electrical Appliances Part 102: Particular Requirements Section 102.34: Motor-Compressors | |
| Safety of Household and Similar Electrical Appliances Part 102: Particular Requirements Section 102.9: Toasters, Grills, Roasters and Similar Appliances | |
| Safety of Household and Similar Electrical Appliances Part 201: General Requirements | |
| Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.139: Room Humidifiers | |
| Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.14: Electric Kitchen Machines | |
| Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.2: Vacuum Cleaners and Water Suction Cleaning Appliances | |
| Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.41: Electric Pumps for Liquids Having a Temperature Not Exceeding 35 Degrees C | |
| Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.43: Clothes Dryers and Towel Rails | |
| Safety of Household and Similar Electrical Appliances Part 202: Particular Requirements Section 202.7: Washing Machines | |
| Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.10: Floor Treatment Machines and Wet Scrubbing Machines | |
| Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.15: Appliances for Heating Liquids | |
| Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.25: Appliances for Heating Food by Means of Microwave Energy | |
| Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.3: Electric Irons | |
| Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.71: Dispensing Appliances for Food Drink and Packaged Consumer Products | |
| Safety of Household Electrical Appliances Part 1: General Requirements | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.11: Tumbler Dryers | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.24: Refrigerators and Food Freezers | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.27: Ultra-Violet and Infra- Red Radiation Skin Treatment Appliances for Household and Similar Use | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.36: Commercial Electric Ranges, Ovens and Hob Elements | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.37: Commercial Electric Deep Fat Fryers | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.38: Commercial Electric Griddles and Griddle Grills | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.39: Commercial Electric Multi-Purpose Cooking Pans | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.42: Commercial Electric Forced Convection Ovens | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.46: Commercial Electric Steam Cookers | |
| Safety of Household Electrical Appliances Part 202: Particular Requirements Section 202.5: Dishwashers | |
| Salt for Spreading on Highways for Winter Maintenance | |
| Seat Belt Assemblies for Motor Vehicles Part 1: Restraining Devices for Adults | |
| Seat Belt Assemblies for Road Vehicles Part 2: Specification for Restraining Devices for Children | |
| Semi-Flexible PVC Floor Tiles | |
| Specification for 3.3 kV 300 A interchangeable bolted flameproof cable couplers & adaptors (including 660 V 300 A adaptors) primarily for use in mines | |
| Specification for agricultural power take-off shafts and guards | |
| Specification for Aluminium capping foil and strip for dairy product containers - Part 2: Aluminium capping foil for skirted closures for plastics containers | |
| Specification for Aluminium Capping Foil and Strip for Dairy Product Containers \x97 Part 1: Aluminium Capping Foil for Glass Container | |
| Specification for aluminium food storage canisters | |
| Specification for aluminium pudding basins | |
| Specification for anaesthetic breathing bags made of anti-static rubber | |
| Specification for Antral trocars and cannulae | |
| Specification for austenitic cast iron | |
| Specification for Beryllium Copper Crinkle Washers | |
| Specification for black bitumen coating solutions for cold application | |
| Specification for Black cup and countersunk bolts and nuts | |
| Specification for Blockboard and Laminboard | |
| Specification for blue-black record inks | |
| Specification for Boilers for use with domestic solid mineral fuel appliances | |
| Specification for Boric Acid and Boric Oxide, Technical Grades | |
| Specification for Bowl Stands for Use In Hospitals | |
| Specification for butyl rubber compounds (including halobutyl compounds) | |
| Specification for Capacitors for railway signalling track circuits | |
| Specification for Carbon steel pipe flanges - (Over 24 inches nominal size) - For the petroleum industry | |
| Specification for Carpenters' Squares and Bevels | |
| Specification for Copper/Chrome Water-Borne Wood Preservatives and Their Application | |
| Specification for Crown Bottle Openers | |
| Specification for Dental Gold Solders | |
| Specification for Dental Zinc Phosphate Cement | |
| Specification for direct reading hygrometers | |
| Specification for direct reading pocket type electroscope exposure meters | |
| Specification for domestic gas pokers and portable underbar ignition burners | |
| Specification for electrically bonded hose and hose assemblies for fuel dispensers | |
| Specification for electrically bonded road and rail tanker hose and hose assemblies for petroleum products | |
| Specification for endotracheal tubes | |
| Specification for Field gates and posts | |
| Specification for fire brigade and industrial ropes and rescue lines | |
| Specification for fire hose couplings and ancillary equipment | |
| Specification for flexible urethane foam for load bearing applications | |
| Specification for fluoride/arsenate/ch romate/dinitrophenol water-borne wood preservatives and their application | |
| Specification for Glue Size for Decorator\xb4s Use | |
| Specification for Halsted's mosquito forceps | |
| Specification for hand-operated chain pulley blocks | |
| Specification for Harrison's bowl forceps | |
| Specification for high voltage post insulators | |
| Specification for horizontal cylindrical hospital sterilizers: pressure steam type | |
| Specification for horizontal rectangular hospital sterilizers: pressure steam type | |
| Specification for hospital pressure sterilizers for water | |
| Specification for Indicating tachometer and speedometer systems for industrial, railway and marine use | |
| Specification for ingot tin | |
| Specification for ingot zinc | |
| Specification for instrument precision rolling bearings (ball bearings) | |
| Specification for Insulator and conductor fittings for overhead power lines - Part 3: Dimensions of ball and socket couplings of string insulator units | |
| Specification for insulator and conductor fittings for overhead power lines. Dimensions | |
| Specification for Kerosine (paraffin) unflued space heaters, cooking and boiling appliances for domestic use | |
| Specification for Letter symbols for semiconductor devices and integrated microcircuits | |
| Specification for Light and Medium Rolling Stock for Mineral Haulage in Mines | |
| Specification for lighting fittings for civil land aerodromes. Angle of approach lights. Visual approach slope indicators | |
| Specification for lighting fittings for civil land aerodromes. Approach lights. High intensity elevated approach lighting fittings | |
| Specification for lighting fittings for civil land aerodromes. Runway lights. Elevated runway-threshold (directional) lighting fittings | |
| Specification for lighting fittings for civil land aerodromes. Runway lights. Elevated runway-threshold and runway-edge (omni-directional) lighting fittings | |
| Specification for lighting fittings for civil land aerodromes. Runway lights. High-intensity elevated runway-lighting fittings | |
| Specification for lighting fittings for civil land aerodromes. Runway lights. Omni-directional elevated runway-edge lighting fittings | |
| Specification for Locking connectors for battery operated vehicles, excluding industrial trucks, (320 ampere rating) | |
| Specification for Materials for water tap and stopvalve seat washers | |
| Specification for mechanical performance of venetian blinds | |
| Specification for metal spectacle frames | |
| Specification for Metal washers - For general engineering purposes | |
| Specification for metallic spiral-wound gaskets for use with flanges to BS 1560, Parts 1 and 2 | |
| Specification for non-reversible connectors and appliance inlets for portable electrical appliances (for circuits up to 250 V). 6 A connector and appliance inlet | |
| Specification for normal equal-loudness level contours for pure tones under free-field listening conditions | |
| Specification for Open Fires Burning Solid Mineral Fuels with Convection, with or without Boilers | |
| Specification for pearlitic malleable iron castings | |
| Specification for Performance of Electrically Heated Sterilizing Ovens | |
| Specification for Peters' Aural Specula | |
| Specification for photographic electronic flash equipment | |
| Specification for piping systems for petroleum refineries and petrochemical plants | |
| Specification for Polythene Pipe (Type 50) for Cold Water Services | |
| Specification for Polythene Splints and Appliances for External Orthopaedic Use | |
| SPECIFICATION FOR POWER-DRIVEN DERRICK CRANES | |
| Specification for Precast Concrete Kerbs, Channels, Edgings and Quadrants | |
| Specification for pressure steam sterilizers of small size (with independent steam supply) | |
| Specification for Protective Aprons for Wet Work | |
| Specification for Quality of vitreous china sanitary appliances | |
| Specification for Rectangular Metal Boxes for Use in High Vacuum Steam Sterilizers | |
| Specification for Roomheaters burning solid mineral fuels | |
| Specification for Rubber Closures for Injectable Products | |
| Specification for Safety of household and similar electrical appliances - Part 102: Particular requirements - Section 102.21 Storage water heaters | |
| Specification for Safety of Household and Similar Electrical Appliances - Part 102: Particular Requirements - Section 102.6: Cooking Ranges, Cooking Tables, Ovens and Similar Appliances for Household Use | |
| Specification for Safety of household and similar electrical appliances - Part 202: Particular requirements - Section 202.19 Battery-powered shavers, hair clippers and similar appliances and their charging and battery assemblies... | |
| Specification for Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements - Section 2.21: Electric Immersion Heaters | |
| Specification for Safety of household and similar electrical appliances Part 102. Particular requirements Section 102.30 Room heaters | |
| Specification for Safety of Household and Similar Electrical Appliances Part 102. Particular Requirements Section 102.42 Commercial Electric Forced Convection Ovens | |
| Specification for Safety of Household and Similar Electrical Appliances Part 3: Complete Particular Specifications Section 3.12: Kitchen Machines | |
| Specification for Safety of Household and Similar Electrical Appliances Part 3: Complete Particular Specifications Section 3.24: Sewing Machines | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Appliances for heating liquids | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Clocks | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Clothes dryers of the tumbler type | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Dishwashers | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Massage appliances | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Refrigerators and food freezers | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Ultra-violet and infra-red radiation skin treatment appliances for household use | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Vacuum cleaners and water suction cleaning appliances | |
| Specification for safety of household and similar electrical appliances. Complete particular specifications. Washing machines | |
| Specification for safety of household and similar electrical appliances. General requirements | |
| Specification for safety of household and similar electrical appliances. Part 102: Particular requirements Section 102.32 Massage appliances | |
| Specification for safety of household and similar electrical appliances. Part 102: Particular requirements. Clocks | |
| Specification for safety of household and similar electrical appliances. Part 102: Particular requirements. Section 102.28: Sewing machines | |
| Specification for safety of household and similar electrical appliances. Part 102: Particular requirements. Section 102.31: Range hoods | |
| Specification for safety of household and similar electrical appliances. Part 102: Particular requirements. Section 102.342: Electric fans and regulators | |
| Specification for safety of household and similar electrical appliances. Part 202: Particular requirements. Section 202.16: Food waste disposers | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Appliances for heating liquids | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Appliances for skin or hair treatment | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Clocks | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Coffee mills and coffee grinders | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Dish-washing machines | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Electric clothes washing machines | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Electric sewing machines | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Food preparation machines including mixers, coffee grinders and coffee mills | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Room heating and similar appliances | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Shavers, hair clippers and similar appliances | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Spin extractors | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Tumbler dryers | |
| Specification for safety of household and similar electrical appliances. Particular requirements. Ventilating fans | |
| Specification for Safety of Household Electrical Appliances - Part 2: Particular Requirements - Section 2.22: Electricaire Heaters | |
| Specification for Safety of Household Electrical Appliances - Part 2: Particular Requirements - Section 2.34: Room Air Conditioners | |
| Specification for Safety of household electrical appliances - Part 2: Particular requirements - Section 2.42 Battery-operated lawn mowers | |
| Specification for Safety of Household Electrical Appliances - Part 2: Particular Requirements - Section 2.6: Frying Pans, Grills, Plate Warmers, and Other Dry Cooking Appliances | |
| Specification for Safety of Household Electrical Appliances - Part 3: Complete Particular Specifications - Section 3.11: Mains-Operated Toothbrushes | |
| Specification for Safety of Household Electrical Appliances - Part 3: Complete Particular Specifications - Section 3.21: Portable Immersion Heater | |
| Specification for Safety of Household Electrical Appliances - Part 3: Complete Particular Specifications - Section 3.9: Stationary Instantaneous Water Heaters | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.11: Tumbler Dryers | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.24: Refrigerators and Food Freezers | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.2: Vacuum Cleaners | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.36: Commercial Electric Ranges, Ovens and Hob Elements | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.37: Commercial Electric Deep Fat Fryers | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.38: Commercial Electric Griddles and Griddle Grills | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.39: Commercial Electric Multi-Purpose Cooking Pans | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.4: Spin Extractors | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.5: Dishwashers | |
| Specification for Safety of Household Electrical Appliances Part 102: Particular Requirements Section 102.7: Washing Machines | |
| Specification for Safety of Household Electrical Appliances Part 2: Section 2.39: Room Humidifiers | |
| Specification for safety of household electrical appliances. Particular requirements. Battery chargers | |
| Specification for safety of household electrical appliances. Particular requirements. Cooker ventilating hoods | |
| Specification for safety of household electrical appliances. Particular requirements. Electric heaters for baby feeding bottles | |
| Specification for safety of household electrical appliances. Particular requirements. Massage appliances | |
| Specification for safety of household electrical appliances. Particular requirements. Microwave ovens | |
| Specification for safety of household electrical appliances. Particular requirements. Portable immersion heaters | |
| Specification for safety of household electrical appliances. Particular requirements. Room heating and similar appliances for use in children's nurseries and similar situations | |
| Specification for safety of household electrical appliances. Particular requirements. Still projectors and viewers | |
| Specification for Safety of Household Electrical Appliances: Part 2: Particular Requirements: Section 2.7: Stationary Non-Instantaneous Water Heaters | |
| Specification for Safety of Household Electrical Appliances: Part 3: Complete Particular Specifications: Section 3.16: Frying Pans, Deep Fat Fryers and Similar Appliances | |
| Specification for safety requirements for medical treatment lamps | |
| Specification for salt for spreading on highways for winter maintenance | |
| Specification for seedlac | |
| Specification for sinus forceps | |
| Specification for sizes of drawing sheets | |
| Specification for sizes of film for industrial radiography and X-ray crystallography | |
| Specification for sizes of film for medical radiography | |
| Specification for Sizes of Rolls of Photographic Black- and-White and Colour Paper for Roll-Head Printers | |
| Specification for Small Fusion-Welded Air Reservoirs for Road and Railway Vehicles | |
| Specification for Sparkguards for Use with Solid Fuel Appliances | |
| Specification for spectacle frames made of cellulose acetate | |
| Specification for Spencer Wells artery forceps (straight and curved) with box joints | |
| Specification for Stands for drawing boards | |
| Specification for Stationery for Quantity Surveying | |
| Specification for stranded wire ropes for haulage purposes | |
| Specification for Styrene-Butadiene Rubber (SBR) - Non-Pigmented, Emulsion Polymerized, General Purpose Types (1500 Series) | |
| Specification for Surgical elastic band trusses | |
| Specification for tanks for the transport of milk and milk products | |
| Specification for technical anhydrous lanolin | |
| Specification for test tubes and boiling tubes | |
| Specification for textile machinery and accessories - shuttles for pirn changing automatic looms - dimensions | |
| Specification for The tapping of holes to receive wire thread inserts (UNC and UNF threads) - Part 1: Diameters 1/4 in and over | |
| Specification for The tapping of holes to receive wire thread inserts (UNC and UNF threads) - Part 2: Diameters below 1/4 in | |
| Specification for the Testing and Approval of Household Electrical Appliances Part 2: Particular Requirements Section 2.9: Clothes Drying Cabinets and Towel Rails | |
| Specification for The Use of High Strength Friction Grip Bolts in Structural Steelwork - Part 1: General Grade Bolts | |
| Specification for Thimbles for natural fibre ropes | |
| Specification for Tilley's aural and nasal forceps | |
| Specification for toughened polystyrene extruded sheet | |
| Specification for Transformers for use in ships | |
| Specification for Tubular heat exchangers for general purposes | |
| Specification for Twist drills and combined drills and countersinks - Part 2: Combined drills and countersinks (centre drills) | |
| Specification for Valve fittings - for compressed gas cylinders - Part 2: Valves with taper stems for use with breathing apparatus (excluding medical gas cylinders to BS 1319) | |
| Specification for Valve fittings For compressed gas cylinders Part 1: Valves with taper stems (excluding valves used for breathing and medical purposes) | |
| Specification for wire for automatic twisting balers | |
| Specification for wrought magnesium alloys for general engineering purposes. Plate, sheet and strip | |
| Specification Indicator plates for fire hydrants and emergency water supplies | |
| Specification. Flexible rubber tubing and hose (including connections where fitted and safety recommendations) for use in LPG vapour phase and LPG/air installations | |
| Specification. Polyethylene Materials for Moulding and Extrusion | |
| Specifications for ammonium chloride | |
| Standard Specification for Steel Bars | |
| Tarpaulins | |
| Testing Coated Fabrics - Part 10: Methods 12A and 12B. Determination of Surface Drag | |
| Testing Coated Fabrics - Part 13: Guide to the Selection of Methods for Colour Fastness to Light Testing | |
| Testing Coated Fabrics - Part 16: Method 18: Determination of Air Permeability | |
| Testing Coated Fabrics - Part 17: Method 20. Method for Determination of Dimensional Stability to Water Immersion | |
| Testing Coated Fabrics - Part 18: Methods for 21A and 21B: Methods for Determination of Resistance to Wicking and Lateral Leakage to Air | |
| Testing Coated Fabrics - Part 19: Methods 22A, 22B and 22C. Determination of Sulphur Staining | |
| Testing Coated Fabrics - Part 21: Method 24. Method for Determination of Elongation and Tension Set | |
| Testing Coated Fabrics - Part 22: Method 25. Methods for Determination of Fusion of PVC Coatings and the State of Cure of Vulcanized Rubber Coatings | |
| Testing Coated Fabrics - Part 24: Methods 27A and 27B - Methods for Determination of Abrasion Resistance | |
| Testing Coated Fabrics - Part 25: Method 28. Method for Determination of the Coating Thickness and Thickness of Any Expanded Layer | |
| Testing Coated Fabrics - Part 28: Method 31. Determination of Specular Gloss | |
| Testing Coated Fabrics - Part 34: Method 37. Method for Determination of Water Vapour Permeability Index (WVPI) | |
| Testing Coated Fabrics - Part 36: Method 39. Method for Determination of the Dimensional Stability of Coated Fabrics to Domestic Washing | |
| Testing Coated Fabrics - Part 38: Method 41. Determination of Wounded Burst Strength | |
| Testing Coated Fabrics - Part 5: Methods 7A, 7B and 7C. Methods for Determination of Tear Strength | |
| Testing coated fabrics \x97 Part 14: Method 16: Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear | |
| Testing coated fabrics \x97 Part 20:Method 23: Method for determination of dimensional changes on mechanical relaxation at zero tension | |
| Testing coated fabrics \x97 Part 31: Method 34: Method for determination of resistance to scuffing and snagging | |
| Testing Coated Fabrics Part 0: Foreword and General Introduction | |
| Testing Coated Fabrics Part 11: Method 13. Method for Determination of Resistance to Blocking | |
| Testing Coated Fabrics Part 12: Methods 14A, 14B, 14C, 14D and 14E. Accelerated Ageing Tests | |
| Testing Coated Fabrics Part 1: Method 1. Method for Determination of Roll Characteristics | |
| Testing Coated Fabrics Part 23: Method 26: Method for Determination of the Thickness of Coated Fabrics) | |
| Testing Coated Fabrics Part 26: Methods 29A, 29B, 29C, and 29D Methods for Determination of Resistance to Water Penetration and Surface Wetting | |
| Testing Coated Fabrics Part 2: Method 4. Conditioning and Selection of Test Specimens | |
| Testing Coated Fabrics Part 3: Methods 5A, 5B and 5C. Methods for Determination of Mass Per Unit Area) | |
| Testing Coated Fabrics Part 4: Method 6. Method for Determination of Breaking Strength and Elongation at Break | |
| Testing Coated Fabrics Part 6: Methods 8A and 8B. Methods for Determination of Bursting Strength | |
| Testing Coated Fabrics Part 7: Method 9. Methods for Determination of Coating Adhesion Strength | |
| Testing Coated Fabrics Part 8: Methods 10A, 10B and 10C. Methods for Determination of Low Temperature Performance | |
| Testing coated fabrics. Methods 11A, 11B, 11C and 11D. Methods for determination of resistance to damage by flexing | |
| Testing Pigments for Paints Part D1: Method of Dispersion for Assessment of Dispersion Characteristics (Introduction) | |
| Testing Pigments for Paints Part D2: Method of Dispersion for Assessment of Dispersion Characteristics Using an Oscillatory Shaking Machine | |
| Testing Pigments for Paints Part D3: Method of Dispersion for Assessment of Dispersion Characteristics Using a High-Speed Impeller Mill | |
| Testing Pigments for Paints Part D4: Method of Dispersion for Assessment of Dispersion Characteristics Using a Bead Mill | |
| Testing Pigments for Paints Part D5: Method of Dispersion for Assessment of Dispersion Characteristics Using an Automatic Muller | |
| Testing Pigments for Paints Part D6: Method of Dispersion for Assessment of Dispersion Characteristics Using a Triple-Roll Mill | |
| Testing Pigments for Paints Part E1: Assessment of Dispersion Characteristics from the Change in Tinting Strength of Coloured Pigments | |
| Testing Pigments for Paints Part E2: Assessment of Dispersion Characteristics from the Change in Fineness of Grind | |
| Testing Pigments for Paints Part E3: Assessment of Dispersion Characteristics from the Change in Gloss | |
| Textile Carcase Conveyor Belting for Use in Underground Mines (Including Fire Performance) | |
| Thermographs (Bimetallic Type) for Air Temperatures Within the Range 0 Degrees Fahrenheit to 140 Degrees Fahrenheit (-20 Degrees Centigrade to 60 Degrees Centigrade) | |
| Toughened Polystyrene for Sheet Extrusion | |
| Tracheal Tubes Part 2: Specification for Oro-Tracheal and Naso-Tracheal Tubes of the Magill Type (Plain and Cuffed) | |
| Tracheal Tubes Part 3: Tubes of the Murphy Type | |
| Tracheal Tubes Part 4: Specification for Tubes of the Cole Type | |
| Tracheal Tubes Part 5: Specification and Methods of Test for Tube Collapse and Cuff Herniation | |
| Tracheal tubes. Specification for all types of tubes | |
| Tracked Changes (Redline) - Gas cylinders - Cylinder valves Part 1: Threads for connection of valves to gas cylinders - Specification | |
| Transportable Gas Container Valves - Part 3: Valve Outlet Connections | |
| Transportable gas container valves - Part 4: Pressure relief devices | |
| Twist Drills and Combined Drills and Countersinks | |
| Unbacked Flexible PVC Flooring Part 1: Homogeneous Flooring | |
| Wastes (Excluding Skeleton Sink Wastes) and Bath Overflows | |
| Wheels for Agricultural Machinery, Implements, and Trailers Part 1: Wheel and Hub Centre Dimensions | |
| Wheels for Agricultural Machinery, Implements, and Trailers Part 2: Tyre and Rim Sizes | |
| Wheels for Agricultural Machinery, Implements, and Trailers Part 3: Nuts | |
| White Metal Bearing Alloy Ingots | |
| Work Study and Organization and Methods (O & M) Part 1: Guide to Organization Study | |
| Work Study and Organization and Methods (O & M) Part 2: Guide to Method Study | |
| Work Study and Organization and Methods (O & M) Part 3: Guide to Work Measurement | |
| Work Study and Organization and Methods (O & M) Part 4: Guide to Work Performance Control | |
| Woven Glass Fibre Fabrics for Plastics Reinforcement - Part 2: Specification for Desized Fabrics | |
| Woven Glass Fibre Fabrics for Plastics Reinforcement - Part 3: Specification for Finished Fabrics for Use with Polyester Resin Systems | |
| Woven Glass Fibre Fabrics for Plastics Reinforcement Part 1: Loom-State Fabrics | |
| Wrought Magnesium Alloys for General Engineering Purposes. Bars, Section and Tubes Including Extruded Forging Stock | |
| Wrought Magnesium Alloys for General Engineering Purposes. Forgings and Cast Forging Stock |
| << Prev | Next >> |