Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
230
240
250
260
270
280
288
289
290
291
292
293
294
295
296
297
298
299
300
310
320
330
340
350
360
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 12 Per Cent Chromium Corrosion-Resisting Steel (45/55 Tonf/Sq In: Limiting Ruling Section 6 In) | |
| Abbreviation of Title Words and Titles of Publications | |
| Aerospace - Separable Tube Fittings for Fluid Systems, 24 Degrees Cone - General Specification | |
| AEROSPACE SERIES Rivets, solid, universal head, inch diameters in metric units, aluminium alloys (colour coded) and nickel-copper alloy, cadmium plated or natural finish - Specification | |
| Aircraft Tyres and Rims - Part 2: Test Methods for Tyres | |
| Aircraft Tyres and Rims Part 1: Specifications | |
| Ammonium Nitrate - Part 0: General Introduction | |
| Ammonium nitrate \x97 Part 10: Method for determination of matter soluble in diethyl ether | |
| Ammonium nitrate \x97 Part 11: Method for determination of inorganic matter and grit insoluble in water | |
| Ammonium nitrate \x97 Part 4: Method for determination of sulphated ash | |
| Ammonium nitrate \x97 Part 7: Methods for determination of nitrite content | |
| Ammonium Nitrate Part 1: Method for Determination of Ammoniacal Nitrogen Content | |
| Ammonium Nitrate Part 2: Method for Determination of Total Nitrogen Content | |
| Ammonium Nitrate Part 3: Method of Measurement of pH Value | |
| Ammonium Nitrate Part 5: Method for Determination of Matter Insoluble in Water | |
| Ammonium Nitrate Part 6: Method for Determination of Water Content | |
| Automatic Intruder Alarm Terminating Equipment in Police Stations | |
| Ballistic Tear Testing of Woven Fabrics | |
| Bars and Extruded Sections of Aluminium-Copper-Mag nesium-Silicon-Manga nese Alloy | |
| Beams | |
| Biodiversity \x97 Code of practice for planning and development | |
| Braided rubber cord assemblies for aerospace use | |
| Breathing Oxygen for Airborne Application | |
| Building performance evaluation of occupied and operational buildings (using data gathered from tests, measurements, observation and user experience) \x97 Specification | |
| Carbon and Low Alloy Steel Containment Structure for Stationary Nuclear Power Reactors | |
| Carpet cleaning products - Part 1: Methods of sampling and test - Section 1.2 Determination of cleaning performance of formulations designed for use with spray extraction machines | |
| Carpet Cleaning Products - Part 1: Methods of Sampling and Test - Section 1.3: General Methods for Impregnated Powder Formulations | |
| Carpet cleaning products - Part 2: Specification for high-foam formulations used in liquid form | |
| Carpet cleaning products - Part 3: Specification for spray extraction machine formulations used in liquid form | |
| Carpet cleaning products - Part 4: Specification for impregnated powder formulations | |
| Carpet Cleaning Products Part 1: Methods of Sampling and Test Section 1.1: General Methods for Formulations Used in Liquid Form | |
| Characteristics, Boundary Dimensions, Tolerances and Static Load Ratings of Airframe Bearings | |
| Chromium-Nickel-Copp er-Molybdenum Corrosion Resisting Steel (Precipitation Hardening) Billets, Bars, Forgings and Parts (1270 MPa to 1470 MPa) | |
| Classification for Viscosity Grades of Industrial Liquid Lubricants | |
| Clay Roofing Tiles and Fittings Part 1: Plain Tiles and Fittings | |
| Clearance Holes for Metric Bolts and Screws | |
| Code of Practice for Health and Safety in Workshops of Schools and Similar Establishments | |
| Code of Practice for Monolithic Linings for Steel Chimneys and Flues | |
| Colours of Indicator Lights, Push Buttons, Annunciators and Digital Readouts - Part 2: Specification for Flashing Lights, Annunciators and Digital Readouts | |
| Compasses for use with pencils in schools | |
| Conveyor Chains, Their Attachments and Associated Chain Wheels Part 1: Specification for Chains (Metric Series) | |
| Conveyor Chains, Their Attachments and Associated Chain Wheels Part 2: Specification for Chain Wheels | |
| Conveyor Chains, Their Attachments and Associated Chain Wheels Part 3: Specification of Attachments (Metric Series) | |
| Conveyor Chains, Their Attachments and Associated Chain Wheels Part 4. Specification for Chains and Attachments (British Series) | |
| Copper for Electrical Purposes Wire for General Electrical Purposes and for Insulated Cables and Flexible Cords | |
| Copper/Chromium/Arse nic Preparations for Wood Preservation | |
| Corrugated Plastics Translucent Sheets Made from Thermo-Setting Polyester Resin (Glass Fibre Reinforced) - Part 1: Material and Performance Requirements | |
| Corrugated Plastics Translucent Sheets Made From Thermo-Setting Polyester Resin (Glass Fibre Reinforced) - Part 2: Specification for Profiles and Dimensions | |
| Design Requirements and Testing of Controlled Atmosphere Laboratories | |
| Dimensions of Pallet Trucks | |
| Dimensions of Pot-Cores Made of Magnetic Oxides and Associated Parts Part 1: IEC Pot-Core Range | |
| Dimensions of Pot-Cores Made of Magnetic Oxides and Associated Parts Part 2: British Pot-Core Range | |
| Discharge and Ventilating Pipes and Fittings, Sand-Cast or Spun in Cast Iron - Part 1: Specification for Spigot and Socket Systems | |
| Discharge and Ventilating Pipes and Fittings, Sand-Cast or Spun in Cast Iron Part 2: Specification for Socketless Systems | |
| Domestic Front Entrance Gates: Wooden Gates | |
| Electrically-Heated Catering Equipment Part 11: Hot Cupboards | |
| Electrically-Heated Catering Equipment Part 12: Bains-Marie | |
| Electrically-Heated Catering Equipment Part 3: Grillers, Grillers on Ranges, Toasters | |
| Electrically-Heated Catering Equipment Part 6: Bulk Liquid Heaters | |
| Electrically-Heated Catering Equipment Part 7: Water Boilers | |
| Electrode Wires and Fluxes for the Submerged Arc Welding of Carbon Steel and Medium-Tensile Steel | |
| Estimation and Differentiation of Nisin in Processed Cheese | |
| Extruded Rigid PVC Corrugated Sheeting - Part 1: Specification for Performance Requirements | |
| Extruded rigid PVC corrugated sheeting - Part 2: Specification for profiles and dimensions | |
| Eye-Protectors for Vehicle Users | |
| Fading Allowances in HF Broadcasting | |
| Ferrules and assembly wires for braided rubber cord assemblies for aerospace use | |
| Forms and dimensions of boiler rivets (as manufactured) | |
| Galvanized mild steel cisterns and covers tanks and cylinders - Part 1: Imperial units | |
| Gas Meters Part 1: Meters of Plate Construction up to 1000 Cubic Feet per Hour Rating | |
| Gas Meters Part 2: Meters of Plate Construction Above 1000 Cubic Feet (28 Cubic Meters) per Hour Rating | |
| Gas Meters Part 3: Diaphragm Meters of 6 Cubic Metres (or 212 Cubic Feet) per Hour Rating for Working Pressures up to 50 mbar | |
| Gas Meters Part 4: Plate Constructed Positive Displacement Diaphragm Meters for a Pressure of 350 mbar (5lbf/in2) and up to 170 Cubic Meters (6000 Cubic Feet) per Hour Rating | |
| Gas Meters Part 5: Specification for Diaphragm Meters for Working Pressures up to 7 Bar | |
| Gas Meters Part 6: Rotary Displacement and Turbine Meters for Gas Pressures up to 100 Bar | |
| Gas Meters Part 7: Mechanical Volume Correctors | |
| Gas Meters Part 8: Electronic Correctors Volume | |
| Glossary of paper/ink terms for letterpress printing | |
| Glossary of Sanitation Terms | |
| Glossary of Terms Applicable to Internal Plastering, External Rendering and Floor Screeding | |
| Glossary of Terms Relating to Timber Preservation | |
| Grading rules for sawn home grown hardwood | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 1: Introduction | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 2: Terminology | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 3: Presentation of Reliability Data on Electronic Components (or Parts) | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 4: Collection of Reliability, Availability and Maintainability Data from Field Performance of Electronic Items | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 5: Reliability Programmes for Equipment | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 6: Feedback of Reliability Information on Equipment | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 7: The Inclusion of of Reliability Clauses in Specifications for Components or Parts for Electronic Equipment | |
| Guide on the Reliability of Electronic Equipment and Parts Used Therein Part 8: The Screening (Sorting) of Electronic Equipment and Parts | |
| Guide to the Selection of Electrical Equipment for Use in Division 2 Areas | |
| Guide to the specification of magnetic cores for use in coincident current matrix stores | |
| Hand Operated Square Drive Socket Wrenches and Accessories | |
| Hand-Held Pressurized Aerosol Dispensers Against Houseflies Part 1: Specification for Insecticidal Efficiency | |
| Hand-Held Pressurized Aerosol Dispensers Against Houseflies Part 2: Method for Determination of Insecticidal Efficiency | |
| Hardmetal insert tooling \x97 Part 22: Classification and designation of approximate chip control zones for indexable inserts with chipbreakers | |
| Hardmetal insert tooling Part 10: Specification for end mills with indexable inserts and Morse taper shank | |
| Hardmetal Insert Tooling Part 11: Dimensions of Face Milling Cutters with Indexable Inserts | |
| Hardmetal Insert Tooling Part 12: Specification for Dimensions of Side and Face Milling and Slotting Cutters with Indexable Inserts | |
| Hardmetal Insert Tooling Part 13: Dimensions of Indexable Hardmetal Inserts Having No Normal Clearance Rounded Corners and Partly Cylindrical Fixing Hole | |
| Hardmetal Insert Tooling Part 14: Designation of Boring Bars (Tool Holders with Cylindrical Shank) for Indexable Inserts | |
| Hardmetal Insert Tooling Part 15: Dimensions for Indexable Hardmetal (Carbide) Inserts with Wiper Edges but Without Fixing Hole | |
| Hardmetal Insert Tooling Part 16: Designation of Shank Type Milling Cutters for Indexable Inserts | |
| Hardmetal Insert Tooling Part 17: Designation of Bore Type Milling Cutters for Indexable Inserts | |
| Hardmetal Insert Tooling Part 18: Specification for Dimensions of Boring Bars for Indexable Inserts | |
| Hardmetal Insert Tooling Part 19: Specification for Dimensions of Indexable Ceramic Inserts with Rounded Corners Without Fixing Hole | |
| Hardmetal Insert Tooling Part 1: Specification for Designation of Indexable Inserts for Cutting Tools | |
| Hardmetal Insert Tooling Part 20: Specification for Dimensions of Ceramic Inserts with Rounded Corners with Fixing Hole | |
| Hardmetal Insert Tooling Part 21: Specification for Cylindrical Shanks with a Parallel Flat for Drills with Indexable Inserts | |
| Hardmetal Insert Tooling Part 3: Dimensions of Indexable Hardmetal (Carbide) Inserts with Rounded Corners and with Cylindrical Fixing Hole | |
| Hardmetal Insert Tooling Part 6: Designation of Turning and Copying Tool Holders and Cartridges of Indexable (Throwaway) Inserts | |
| Hardmetal Insert Tooling Part 7: Specification for Dimensions for Single Point Turning and Copying Tool Holders for Indexable Inserts | |
| Hardmetal Insert Tooling Part 8: Dimensions for Type A Cartridges for Indexable (Throwaway) Inserts | |
| Hardmetal Insert Tooling Part 9: End Mills with Indexable Inserts and Flatted Parallel Shank | |
| Hardmetal insert tooling. Specification for dimensions for indexable (throwaway) hardmetal inserts without fixing hole | |
| Hardmetal insert tooling. Specification for dimensions for indexable (throwaway) hardmetal triangular inserts for milling cutters | |
| Health and safety for design and technology in educational and similar establishments \x96 Code of practice | |
| Health and well-being and indoor environmental quality in buildings Part 1: Health and well-being in non domestic buildings \x96 Code of practice | |
| Hexagon Socket Screws and Wrench Keys: Metric Series - Part 1: Hexagon Socket Head Cap Screws | |
| Hexagon Socket Screws and Wrench Keys: metric series - Part 6: Specification for Hexagon Socket Button Head Screws | |
| Hexagon Socket Screws and Wrench Keys: Metric Series - Part 7: Specification for Hexagon Socket Shoulder Screws | |
| Hexagon Socket Screws and Wrench Keys: Metric Series Part 8. Specification for Hexagon Socket Countersunk Head Screws | |
| Hexagon Socket Screws and Wrench Keys: Metric Series | |
| Hexagon Socket Screws and Wrench Keys; Metric Series - Part 4: Specification for Hexagon Socket Set Screws with Dog Point | |
| Hexagon Socket Screws and Wrench Keys; Metric Series - Part 5: Specification for Hexagon Socket Set Screws with Cup Point | |
| Hexagon Socket Screws and Wrench Keys; Metric Series Part 2: Hexagon Socket Set Screws with Flat Point | |
| Hexagon Socket Screws and Wrench Keys; Metric Series Part 3: Specification for Hexagon Socket Set Screws with Cone Point | |
| Hexagon Socket Screws and Wrench Keys; Metric Series Part 9: Wrench Keys | |
| High Pressure Seamless Copper Tubes | |
| High Slag Blastfurnace Cement | |
| Identification of Rubbers by Infra-Red Spectrometry Part 1: Method for Identification of Hydrocarbon, Chloroprene, Nitrite and Chlorosulphonated Polyethylene Rubbers | |
| Ingots and Castings of Aluminium-Copper- Silicon-Nickel-Magne sium -Iron Alloy (Solution Treated and Precipitation Treated) (Suitable for Pistons) | |
| Insecticidal Efficiency of Aerosols Against Flies | |
| Inspection and Testing Procedure for Aircraft Material - STEEL | |
| Integral nest boxes - Selection and installation for new developments - Specification | |
| ISO Metric Black Hexagon Bolts, Screws and Nuts | |
| Light Gauge Stainless Steel Tubes, Primarily for Water Applications | |
| Linear Measuring Instruments for Use on Building and Civil Engineering Constructional Works. Steel Measuring Tapes, Steel Bands and Retractable Steel Pocket Rules | |
| Liquefied Petroleum Gas Part 2: Specification for Automotive LPG | |
| Liquified Petroleum Gas Part 1: Commercial Butane and Propane | |
| Machine Tool Components - Part 11: Recommendations for Accuracy Grades of Gears | |
| Machine Tool Components - Part 13: Specification for Dimensions of Counterbored Holes | |
| Machine Tool Components - Part 14: Method for Determination of the Pilot Diameter of 60 Degrees Centre Holes | |
| Machine Tool Components Part 5: Cover Plates and Apertures | |
| Machine Tool Components Part 6: Change Gears | |
| Machine tool components. Shaft spacers | |
| Magnetic Flaw Detection Inks and Powders | |
| Manufacture of Glued-Laminated Timber Structural Members | |
| Marking of Hatchway Beams | |
| Measuring and Expressing the Performance of Radio Receivers for Sound Broadcasting Part 1: General Conditions | |
| Measuring and Expressing the Performance of Radio Receivers for Sound Broadcasting Part 2: Measurements Related to the Audio-Frequency Part of the Receiver | |
| Measuring and Expressing the Performance of Radio Receivers for Sound Broadcasting Part 3: Radio-Frequency Measurements on Receivers for Amplitude-Modulated Emissions | |
| Measuring and Expressing the Performance of Radio Receivers for Sound Broadcasting Part 5: Measurement on Frequency-Modulated Receivers of the Response to Impulsive Interference | |
| Method for Calculating loudness | |
| Method for Designation of ticket numbers of industrial sewing threads | |
| Method for determination of thickness loss of textile floor coverings under dynamic loading | |
| Method for determination of thickness of textile floor coverings | |
| Method for Specifying the Technical Quality of Coke for Use in Blast Furnaces | |
| Method for the Determination of thickness, compression and recovery characteristics of textile floor coverings | |
| Method of Evaluating Pneumatic Valve Positioners with Input Signal 3 to 15 LBF/in 2 (Gauge) | |
| Method of Measurement of Current Noise Generated in Fixed Resistors | |
| Method of rating industrial noise affecting mixed residential and industrial areas | |
| Method of test for ignition temperature of gases and vapours | |
| Method of test for the Determination of Certain Water-Or Alkali-Soluble Additives in Cellulosic or Synthetic Fibres, Yarns and Fabrics or Yarns and Fabrics Made from Blends of Such Fibres | |
| Method of test for The determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-ex tension machines) | |
| Methods for determination of constructional details of carpets with yarn pile | |
| Methods for Determination of Fibre Length by Comb Sorter Diagram | |
| Methods for Measuring and Expressing The Performance of Radio Receivers Receivers for A.M. and F.M. Sound Broadcast Transmissions | |
| Methods for Non-Destructive Testing of Steel Castings | |
| Methods for non-destructive testing of steel forgings. Penetrant flaw detection | |
| Methods for rating and assessing industrial and commercial sound | |
| Methods for sampling oilseeds | |
| Methods for Superficial Hardness Test (Rockwell Method) and for Verification of Superficial Hardness Testing Machines (Rockwell Method) | |
| Methods for the Analysis of Iron Ores Part 3: Silicon (Gravimetric Method) | |
| Methods for The measurement of performance of still projectors | |
| Methods for the sampling of manganese ores. Manual sampling | |
| Methods for ultrasonic detection of imperfections in steel forgings | |
| Methods of test for Aluminium oxide - Part 0: General introduction | |
| Methods of Test for Aluminium Oxide - Part 16: Determination of Zinc Content by Flame Atomic Absorption to BS 4140: 1967 | |
| Methods of Test for Aluminium Oxide - Part 18: Determination of Phosphorus Content | |
| Methods of Test for Aluminium Oxide - Part 19: Determination of Boron Content | |
| Methods of Test for Aluminium Oxide - Part 1: Preparation and Storage of Test Samples | |
| Methods of Test for Aluminium Oxide - Part 20: Sampling | |
| Methods of Test for Aluminium Oxide - Part 22: Determination of Manganese Content | |
| Methods of Test for Aluminium Oxide Part 10: Determination of Untamped Density | |
| Methods of Test for Aluminium Oxide Part 11: Determination of Sodium Content to BS 4140: 1967 | |
| Methods of Test for Aluminium Oxide Part 12: Determination of Vanadium Content to BS 4140: 1967 | |
| Methods of Test for Aluminium Oxide Part 13: Preparation of Sample Solution by Treatment with Hydrochloric Acid Under Pressure to BS 4140: 1967 | |
| Methods of Test for Aluminium Oxide Part 14: Determination of Calcium Content | |
| Methods of Test for Aluminium Oxide Part 17: Determination of Fluorine Content | |
| Methods of Test for Aluminium Oxide Part 21: Particle Size Analysis | |
| Methods of Test for Aluminium Oxide Part 23: Determination of Specific Surface Area by Nitrogen Absorption (Single-Point Method) | |
| Methods of Test for Aluminium Oxide Part 2: Determination of Loss of Mass at 300 Degrees C | |
| Methods of Test for Aluminium Oxide Part 3: Determination of Loss of Mass at 1000 Degrees C and 1200 Degrees C | |
| Methods of Test for Aluminium Oxide Part 4: Preparation of Sample Solution by Alkaline Fusion | |
| Methods of Test for Aluminium Oxide Part 5: Determination of Silica Content | |
| Methods of Test for Aluminium Oxide Part 6: Determination of Titanium Content | |
| Methods of Test for Aluminium Oxide Part 7: Determination of Iron Content | |
| Methods of Test for Aluminium Oxide Part 8: Determination of Absolute Density Using a Pyknometer to BS 4140: 1967 | |
| Methods of Test for Aluminium Oxide Part 9: Measurement of the Angle of Repose to BS 4140 : 1967 | |
| Methods of Test for Aluminum Oxide Part 24: Determination of Fine Partical Size Distribution (Method Using Electroformed Sieves) | |
| Methods of test for ammonium nitrate | |
| Methods of Test for Buttons | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use - Part 12: Guide to Sampling Techniques | |
| Methods of test for Phosphoric acid (orthophosphoric acid) for industrial use - Part 4: Determination of fluorine content | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use - Part 8: Determination of Calcium Content (Flame Atomic Absorption Method) | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use \x97 Part 13: Determination of Soluble Sulphate Content (Potentiometric Method) | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use \x97 Part 7: Determination of Total Phosphorus (V) Oxide Content: Quinoline Phosphomolybdate Gravimetric Method | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use Part 10: Determination of Oxides of Nitrogen Content | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use Part 11: Determination of Lead Content (Atomic Absorption Spectrometric Method) | |
| Methods of Test for Phosphoric Acid (Orthophosphoric Acid) for Industrial Use Part 6: Determination of Arsenic Content | |
| Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of chloride content | |
| Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of silica content | |
| Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of sulphate content | |
| Methods of test for phosphoric acid for industrial use. Determination of iron content | |
| Methods of Test for Seats on Agricultural Wheeled Tractors Part 1: Tests on Artificial Track | |
| METHODS OF TEST FOR SULPHUR | |
| Methods of Testing Fusion Welds in Copper and Copper Alloys | |
| Microfiche. Part 1: Specification for formats of 60 and 98 frames | |
| Microform Readers | |
| MINIMUM PERFORMANCE SPECIFICATIONS FOR LOW-COST SOUND-BROADCASTING RECEIVERS | |
| Mosaic Parquet Panels - Part 2: Classification and Quality Requirements | |
| Mosaic Parquet Panels General Characteristics | |
| Non-Domestic Space Heaters Burning Liquefied Petroleum Gases | |
| Oil-Burning Air Heaters Part 2: Fixed, Flued, Fan-Assisted Heaters | |
| Phosphor bronze sheets, strip and foil grades 407/1, 407/2, and 407/3 | |
| Planning Standards for Terrestrial FM Sound Broadcasting at VHF | |
| Polyvinyl Acetate (PVA) Emulsion Adhesives for Wood | |
| Powder actuated fixing systems - Part 2: Specification for tools | |
| Powder Actuated Fixing Systems Part 1: Code of Practice for Safe Use | |
| Power Press Nomenclature Part 1: Open Front Mechanical Power Press | |
| Power Presses, Open Front Mechanical Type | |
| Prefabricated Gypsum Wallboard Panels | |
| Procedure for Inspection and Testing of Steel Tubes | |
| Procedure for Inspection and Testing of Wrought Aluminium and Aluminium Alloys | |
| Procedure for Inspection, Testing and Acceptance of Steel Sheet and Strip | |
| Procedure for inspection, testing and acceptance of wrought magnesium base alloys | |
| Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys | |
| Procedure Inspection and Testing of Aluminium- Base and Magnesium-Base Ingots and Castings | |
| Recommendations for Data on Shielding from Ionizing Radiation - Part 1: Shielding from Gamma Radiation | |
| Recommendations for Data on Shielding from Ionizing Radiation - Part 2: Shielding from X-Radiation | |
| Recommendations for Maximum Surface Temperatures of Heated Domestic Equipment | |
| Recommendations for metric sizes of non-ferrous and ferrous bars. Ferrous bars | |
| Recommendations for metric sizes of non-ferrous and ferrous bars. Non-ferrous bars | |
| Recommendations for Peat for Horticultural and Landscape Use | |
| Recommendations for the Care and Maintenance of Underwater Breathing Apparatus Part 2: Standard Diving Equipment | |
| Recommendations for the Care and Maintenance of Underwater Part 1: Breathing Apparatus Compressed Air Open Circuit Type | |
| Recommendations for the co-ordination of dimensions in building. Co-ordinating sizes for building components and assemblies | |
| Recommendations for the selection, use and care of man-made fibre ropes in marine applications | |
| Recommendations for transplanting semi-mature trees | |
| Recommendations on cleaning in the fish industry | |
| Report on Reproducibility of Methods of Chemical Analysis Used in the Iron and Steel Industry | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 1. Specification for Resistance Spot Welding Electrode Adaptors | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 10: Electrode Adaptors, Male Taper 1: 10, Parallel Shank Fixing for End Thrust Electrodes | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 11: Specification for Electrode Holders, Taper Fixing 1: 10 | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 12: Specification for Electrode Holders, Morse Taper Fixing | |
| Resistance spot welding electrodes, electrode holders and ancillary equipment Part 13. Specification for electrode holders, parallel shank fixing for end thrust | |
| Resistance spot welding electrodes, electrode holders and ancillary equipment Part 14. Specification for cooling tubes | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 15: Specification for Insulated Pins for Use in Electrode Back-Ups | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 2: Straight Resistance Spot Welding Electrodes | |
| Resistance spot welding electrodes, electrode holders and ancillary equipment Part 3. Specification for the dimensions of electrode taper fits | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 5: Specification for Electrode Back-Ups and Clamps | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 6: Electrode Adaptors, Female Taper 1:10 | |
| Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 7: Male Electrode Caps | |
| Resistance spot welding electrodes, electrode holders and ancillary equipment Part 8. Specification for insulation caps and bushes | |
| Resistance spot welding electrodes, electrode holders and ancillary equipment Part 9. Specification for electrode adaptors, male taper 1 : 10, conical fixing 1 : 10 | |
| Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for taper plug gauges and taper ring gauges | |
| Retrofit assessment for domestic dwellings \x96 Code of practice | |
| Rod Links for Root Machinery Part 3: Potato Elevator Diggers and Main Elevators on Complete Potato Harvesters: Metric Units | |
| Rod Links for Root Machinery Part 4: Carrot and Sugar Beet Harvesters: Metric Units | |
| Rotary Core Drilling Equipment - Specification for Wireline Diamond Drilling Equipment - System A. Metric Units | |
| Rotary Core Drilling Equipment Part 3: Specification for System A. Metric Units | |
| Rotary Core Drilling Equipment Part 4: Specification for System A. Inch Units | |
| Schedule of preferred chemical indicators | |
| Self-Tapping Screws and Metallic Drive Screws | |
| Severity Levels for Discontinuities in Steel Castings Part 1: Surface Discontinuities Revealed by Magnetic Particle Flaw Detection | |
| Severity Levels for Discontinuities in Steel Castings Part 2: Surface Discontinuities Revealed by Penetrant Flaw Detection | |
| Single Use, Sterilized Surgical Rubber Gloves | |
| Sizes of Paper and Board Part 1: A and B Series of Trimmed Sizes of Writing Paper and Certain Classes of Printed Matters | |
| Sizes of Paper and Board Part 2: Specification for Untrimmed Sizes | |
| Slide rule for calculation of tolerances (inch units) | |
| Slide rule for calculation of tolerances (metric units) | |
| Slotted set screws: metric series Part 1. Specification for slotted set screws with flat point | |
| Slotted set screws: metric series Part 4. Specification for slotted set screws with cup point | |
| Sodium Hydroxide (Technical Grades) | |
| Sound Power Levels of Noise Sources Part 0: Guide for the Use of Basic Standards and for the Preparation of Noise Test Codes | |
| Sound Power Levels of Noise Sources Part 4: Engineering Methods for Determination of Sound Power Levels for Sources in Free-Field Conditions over a Reflecting Plane | |
| Sound Power Levels of Noise Sources Part 5: Precision Methods for Determination of Sound Power Levels for Sources in Anechoic and Semi-Anechoic Rooms | |
| Sound Power Levels of Noise Sources Part 6: Survey Method for Determination of Sound Power Levels of Noise Sources | |
| Sound Power Levels of Noise Sources Part 7: Survey Method for Determination of Sound Power Levels of Noise Sources Using a Reference Sound Source | |
| Sound Power Levels of Noise Sources Part 8: Performance and Calibration of Reference Sound Sources | |
| Sound power levels of noise sources. Engineering methods for determination of sound power levels for sources in special reverberation test rooms | |
| Sound power levels of noise sources. Precision methods for determination of sound power levels for broad-band sources in reverberation rooms | |
| Sound power levels of noise sources. Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms | |
| Specification - Shackles, carbon steel, cadmium plated for aircraft | |
| Specification for 1 1/2 per cent nickel-chromium-moly bdenum steel - (880/1080 MPa: limiting ruling section 150 mm) | |
| Specification for 1; per cent nickel-chromiummolyb denum steel - (90/110 kgf/mm2 (57/70 tonf/in2): limiting ruling section 150 mm (6 in)) | |
| Specification for 2.5% nickel-chromium-moly bdenum (high carbon) steel billets, bars, forgings and parts (1 160 \x96 1 310 MPa: limiting ruling section 155 mm) | |
| Specification for 3 per cent nickel-chromium-moly bdenum case-hardening steel | |
| Specification for 3% chromium-molybdenum- vanadium steel billets, bars, forgings and parts (1320\x961470 MPa: limiting ruling section 70 mm) (suitable for nitriding) | |
| Specification for 35 mm Microcopying of Technical Drawings Part 2: Photographic Requirements for Silver Film | |
| Specification for 35 mm microcopying of technical drawings. Part 1: Operating procedures | |
| Specification for 35 mm microcopying of technical drawings. Part 3: Unitized microfilm carriers | |
| Specification for Aircraft Material Fork joints (lowtensile type) (for sizes No. 4 B.A. to 1/2 inch B.S.F. inclusive) | |
| Specification for aircraft material. '55' carbon steel (hardened and tempered) (55/65 tonf/sq in: limiting ruling section 1/8 in) | |
| Specification for aircraft material. '55' carbon steel (normalized) (45/55 tonf/sq in: limiting ruling section 4 in) | |
| Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (35/45 tonf/sq in: limiting ruling section 6 in) | |
| Specification for aircraft material. ASH. | |
| SPECIFICATION FOR ALUMINIUM-COATED SHEET AND STRIP OF ALUMINIUM-COPPER-MAN GNESIEM-SILICON-MANG ANESE ALLOY (Solution treated and aged at room temperature) (Cu 4-4, Mg 0\xb75, Si 0\xb77, Mn 0\xb78) | |
| Specification for an artificial mastoid for the calibration of bone vibrators used in hearing aids and audiometers | |
| Specification for bar and section for machining of commercially pure titanium (Tensile strength 540\x96740 MPa) | |
| Specification for bar and section for machining of titanium-aluminium-v anadium alloy (Tensile strength 900\x961 160 MPa) (Limiting ruling section 150 mm) | |
| Specification for benzyl alcohol | |
| Specification for building papers (breather type) | |
| Specification for Capacitors for Use in Tubular Fluorescent, High Pressure Mercury, and Low Pressure Sodium Vapour Discharge Lamp Circuits | |
| Specification for carbon steel (bar for the manufacture of forged bolts only) | |
| Specification for carbon steel - (bar for the manufacture of forged bolts only) | |
| Specification for Carbon-Molybdenum Steel (Bar for the Manufacture of Forged Bolts Only) | |
| Specification for Cartridge fuse links for miniature fuses | |
| Specification for Cartridge-Operated Fixing Tools | |
| Specification for Cast iron spigot and socket flue or smoke pipes and fittings | |
| Specification for Cattle Grids | |
| Specification for Chromium-Molybdenum Steel Tube (1150 MPa) - (Maximum Wall Thickness 8 mm) | |
| Specification for Chromium-nickel-copp er-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130 MPa to 1330 MPa) | |
| Specification for Chromium-Nickel-Copp er-Molybdenum Corrosion Resisting Steel (Precipitation Hardening) Billets, Bars, Forgings and Parts (1130-1330 MPa) | |
| Specification for Chromium-nickel-copp ermolybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa) | |
| Specification for Chromiummolybdenum steel tube (700 MPa) \x97 (Outside diameter not less than 12.5 mm) (Weldable) | |
| Specification for Circular saws for woodworking and their attachment | |
| Specification for Coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer | |
| Specification for Coir Door Mats | |
| Specification for cold water storage cisterns (polyolefin or olefin copolymer) and cistern covers | |
| Specification for colours of indicator lights, push buttons, annunciators and digital readouts. Colours of indicator lights and push buttons | |
| Specification for Combined wire and fibre ropes - Part 1: Combined ropes - Part 2: Spring lay ropes | |
| Specification for commercial butane and propane | |
| Specification for Compressed straw building slabs | |
| Specification for compression knapsack sprayers. Pressure retaining type | |
| Specification for Compression Knapsack Sprayers | |
| Specification for conventional typographical character for legibility tests (ISO test character) | |
| Specification for Cooker Control Units Rated at 30 Amperes and 45 Amperes 250 Volts Single-Phase Only | |
| Specification for Copper-Covered Steel Wire for Telephone and Telegraph Purposes | |
| Specification for Core Drilling Equipment Basic Equipment | |
| Specification for core drilling equipment. Concrete drilling equipment | |
| Specification for Cork/Paper Jointing | |
| Specification for cutlery for local authorities, hospitals and other public bodies | |
| Specification for data processing flow chart symbols, rules and conventions | |
| Specification for dental mercury | |
| Specification for diaphragms for contraceptive use | |
| Specification for Dimensional and quantity tolerances for steel drop and press forgings and for upset forgings made on horizontal forging machines | |
| Specification for dimensions of pot cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment | |
| Specification for Dimensions of the Transmission Coupling (Slip-Joint) to Dental Handpieces | |
| Specification for domestic front entrance gates. Metal gates | |
| Specification for donkey jackets | |
| Specification for Electrically-heated catering equipment - Part 10: Sterilizing sinks | |
| Specification for Electrically-heated catering equipment - Part 5: Steaming ovens | |
| Specification for Electrically-Heated Catering Equipment - Part 9: Boiling Pans | |
| Specification for electrically-heated catering equipment. Deep fat fryers | |
| Specification for electrically-heated catering equipment. Griddles and griddle grills | |
| Specification for Epoxide Resin Pre-Impregnated Glass Fibre Fabrics | |
| Specification for expanded metal (steel) for general purposes | |
| Specification for External dimensions for vertical in-line centrifugal pumps - Part 1: \x93I\x94 type | |
| Specification for External dimensions for vertical in-line centrifugal pumps \x97 Part 2: \x93U\x94 type | |
| Specification for Fixed Centres for Use on Machine Tools and in Other Applications | |
| Specification for fixed outdoor rotary clothes driers | |
| Specification for flanged steel parallel slide valves for general purposes | |
| Specification for Flash Welding of Steel Tubes for Pressure Applications | |
| Specification for Flexible cellular PVC sheeting | |
| Specification for Flexible Polyurethane Foam Sheeting for Use in Laminates | |
| Specification for forging stock and wire of titanium-aluminium-v anadium alloy (Tensile strength 1 100\x961 300 MPa) (Limiting ruling section 20 mm) | |
| Specification for forging stock of titanium-aluminium-v anadium alloy (Tensile strength 900\x961 160 MPa) (Limiting ruling section 150 mm) | |
| Specification for forgings of titanium-aluminium-v anadium alloy (Tensile strength 900\x961 160 MPa) (Limiting ruling section 150 mm) | |
| Specification for Galvanized Mild Steel Cisterns and Covers, Tanks and Cylinders - Part 2: Metric Units | |
| Specification for General Design Requirements for Aircraft Oxygen Systems and Equipment | |
| Specification for Glass Mica Boards for Electrical Purposes | |
| Specification for Heavy rolling stock for mineral haulage in mines | |
| Specification for Hospital trolleys for instruments, dressings and for anaesthetists\x92 use including angular trolleys | |
| Specification for Hot applied bitumen based coatings for ferrous products. Metric units | |
| Specification for industrial scalp protectors (light duty) | |
| SPECIFICATION FOR INGOTS AND CASTINGS OF ALUMINIUM-SILICON-CO PPER-MAGNESIUM ALLOY (Solution treated and precipitation treated) (Si 5, Cu 2.2, Mg 0.5) | |
| Specification for Ingots and castings of aluminium-siliconcop per- iron-nickelmagnesium alloy - (Precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1) | |
| Specification for Ingots and castings of magnesium - 10 % aluminium-zincmangan ese alloy - (Solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3) | |
| Specification for Ingots and castings of magnesium - 10 % aluminium-zincmangan ese alloy - (Solution treated) (Al 10, Zn 0.5, Mn 0.3) | |
| Specification for Ingots and castings of magnesium - 8 % aluminium-zincmangan ese alloy - (Solution treated) (Al 8, Zn 0.5, Mn 0.3) | |
| Specification for inks for letterpress three- or four-colour printing | |
| SPECIFICATION FOR INSULATED FLEXIBLE CABLES AND CORDS FOR COIL LEADS | |
| Specification for Light Gauge Stainless Steel Tubes - Part 2: Metric Units | |
| Specification for Liquid Carbon Dioxide, Industrial | |
| Specification for Low Heat Portland-Blastfurnac e Cement Part 2: Metric Units | |
| Specification for Machine Screws and Machine Screw Nuts; Metric Series | |
| Specification for Machine Tool Components - Part 10: Trapezoidal Threads for Lead and Feed Screw Assemblies | |
| Specification for Machine Tool Components - Part 7: Wide Range Collets | |
| Specification for Machine Tool Components - Part 8: Rollers and Roller Pins for Roller Boxes and Roller Steadies | |
| Specification for Machine Tool Components - Part 9: Levelling Screws, Nuts and Seating Plates | |
| Specification for Machine Tool Components \x97 Part 1: Locknuts ("C" Type, Socket Set Screw Locking) | |
| Specification for Machine Tool Components \x97 Part 2: Collars | |
| Specification for machine tool components. Rolling bearing end caps and retaining plates | |
| Specification for mechanical cable glands for rubber and plastics insulated cables | |
| Specification for metal collapsible tubes for eye ointment | |
| Specification for Metal Props and Struts | |
| Specification for Metre Rules and Rulers for School Use | |
| Specification for Metric Keys and Keyways - Part 2: Woodruff Keys and Keyways | |
| Specification for Metric Keys and Keyways \x97 Part 1: Parallel and Taper Keys | |
| Specification for microform readers. Microform reader resolution test film | |
| Specification for Mild steel billets, bars, forgings and parts (Suitable for bearing shells) | |
| Specification for nickel-chromium-tita nium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel base, Cr 19.5, Ti 0.4) | |
| Specification for Nickel-chromium-tita nium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners - (Maximum diameter or minor sectional dimension 30 mm) (Nickel base Cr 19.5-Ti 2.2-Al 1.4) | |
| Specification for nylon boot and shoe laces | |
| Specification for oil-burning air heaters. Fixed, flued convector heaters | |
| Specification for oil-burning air heaters. Non-domestic, transportable, fan-assisted heaters | |
| Specification for Paper and paper jointing | |
| Specification for Pentachlorophenyl Laurate | |
| Specification for Permanently fixed ladders | |
| Specification for petrol (gasoline) for motor vehicles | |
| Specification for pitch-impregnated fibre conduit | |
| Specification for Plain setting rings for use with internal diameter measuring machines \x97 Inch units | |
| Specification for Plain setting rings for use with internal diameter measuring machines \x97 Metric units | |
| Specification for porcelain and silica crucibles | |
| Specification for preformed rubber gaskets for weather exclusion from buildings. Cellular gaskets | |
| Specification for preformed rubber gaskets for weather exclusion from buildings. Non-cellular gaskets | |
| Specification for pressed wool felts | |
| Specification for Pressure - sensitive adhesive identification tape | |
| Specification for Pressure-Sensitive Adhesive Waterproof PVC Tape | |
| Specification for Pulley blocks for use with wire rope - For a maximum lift of 25 tonf in combination | |
| Specification for Requirements and Testing of Protective Cabs and Frames for Agricultural Wheeled Tractors | |
| Specification for rubber hose and hose assemblies for liquefied petroleum gas lines | |
| Specification for Safety requirements for child safety barriers for domestic use | |
| Specification for safety requirements for mains-operated electronic and related apparatus for household and similar general use | |
| Specification for safety requirements for perambulators (baby carriages) | |
| Specification for self-luminous exit signs | |
| Specification for Sheet and strip of aluminium - 2 1/4% magnesium alloy - (Temper designation H16 or H26) | |
| Specification for Sheet and Strip of Aluminium-2 1/4% Magnesium Alloy - (Temper Designation-0) | |
| Specification for sheet and strip of aluminium-manganese alloy (one-quarter hard - H2) | |
| Specification for sheet and strip of aluminium-manganese alloy (soft - O) | |
| Specification for sheet and strip of aluminium-manganese alloy (three-quarter hard - H6) | |
| Specification for sheet and strip of commercially pure titanium (Tensile strength 290\x96420 MPa) | |
| Specification for sheet and strip of commercially pure titanium (Tensile strength 390\x96540 MPa) | |
| Specification for sheet and strip of commercially pure titanium (Tensile strength 570\x96730 MPa) | |
| Specification for sheet and strip of titanium-copper alloy (Tensile strength 540\x96700 MPa) | |
| Specification for sheet of titanium-aluminium-v anadium alloy (Tensile strength 960\x961 270 MPa) | |
| Specification for Sizes of Papers and Boards | |
| Specification for slotted grub screws. Metric series | |
| Specification for socket spanners. Inch series. Metric sizes | |
| Specification for socket spanners. Inch series | |
| Specification for sodium chlorate | |
| Specification for spot welding electrodes and electrode holders | |
| Specification for Steel Chimneys | |
| Specification for steel ladders for permanent access | |
| Specification for steel wire for fences | |
| Specification for Sulphate-Resisting Portland Cement | |
| Specification for Supersulphated cement | |
| Specification for Surgical Stainless Steel Monofilament Wire. Fully Softened | |
| Specification for test sieves | |
| Specification for textile machinery and accessories - paper patterns for dobbies - dimensions | |
| Specification for the Dimensions of E-Cores Made of Ferromagnetic Oxides for Use in Telecommunication and Allied Electronic Equipment | |
| Specification for the requirements for resistance to water absorption and crazing of vitrified hotelware | |
| Specification for Thermostats for Gas-Burning Appliances | |
| Specification for truck type concrete mixers | |
| Specification for tube of 99% aluminium (cold drawn: tested hydraulically) (not exceeding 12 mm wall thickness) | |
| Specification for Tube of Aluminium - 2 1/4% Magnesium Alloy (Soft: tested hydraulically) (Not exceeding 12 mm wall thickness) | |
| Specification for Tube of Aluminium-Copper-Mag nesium-Silicon-Manga nese Alloy - (Solution Treated and Precipitation Treated (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) | |
| Specification for uncoated aluminium hollow-ware cooking utensils | |
| Specification for varnish for aeronautical purposes | |
| Specification for Varnished Fabrics and Tapes for Electrical Purposes | |
| Specification for Welding Primer and Weld-Through Sealants, Adhesives and Waxes for Resistance Welding of Sheet Steel | |
| Specification for Wire for solid, cold-forged rivets of aluminium-5 % magnesium alloy - (Not exceeding 10 mm diameter) | |
| Specification for Wire for solid, cold-forged rivets of aluminium-coppermagn esium alloy (Not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3) | |
| Specification for X-ray protective lead glasses | |
| Specification for yachtsmen's safety harnesses and safety lines | |
| SPECIFICATION STRUCTURAL STEEL SECTIONS Part 2. Hot-rolled Hollow Sections | |
| Specification. Envelopes for commercial, official and professional use (terms and sizes) | |
| Steel cylinders for the storage and transport of 'liquefiable' gases | |
| Steel Roller Chains, Chainwheels and Attachments for Conveyors | |
| Structural Steel Sections - Part 1: Specification for Hot-Rolled Sections | |
| Surface Finish of Blast-Cleaned Steel for Painting | |
| Surface Materials for Use in Radioactive Areas - Part 1: Methods of Measuring and Evaluating the Decontamination Factor | |
| Surface Materials for Use in Radioactive Areas Part 2: Guide to the Selection of Materials | |
| Terrazzo Tiles | |
| Test Sieves - Technical Requirements and Testing - Part 1: Test Sieves of Metal Wire Cloth | |
| Test Sieves - Technical Requirements and Testing - Part 2: Test Sieves of Perforated Metal Plate | |
| Testing of Metals | |
| Tests on Electric Cables Under Fire Conditions Part 1: Method of Test on a Single Vertical Insulated Wire or Cable | |
| Tests on Electric Cables Under Fire Conditions Part 2: Method of Test on a Single Small Vertical Insulated Wire or Cable | |
| Tests on Electric Cables Under Fire Conditions Part 3: Method for Classification of Flame Propagation Characteristics of Bunched Cables | |
| Tracked Changes (Redline) - Health and safety for design and technology in educational and similar establishments - Code of practice | |
| Two-Part Polysulphide-Based Sealants | |
| UNJ Threads, with Controlled Root Radius, for Aerospace: Inch Series | |
| Valves for Hydraulic Fluid Power Systems Part 1: Methods for Determining Pressure Differential Pressure/ Flow Characteristics | |
| Valves for Hydraulic Fluid Power Systems Part 2: Methods for Determining Performance | |
| Verification of the Testing Machine | |
| Wood Preservation by Means of Copper/ Chromium/Arsenic Compositions Part 2: Method for Timber Treatment | |
| Wood Preservation by Means of Copper/Chromium /Arsenic Compositions Part 1: Preservatives |
| << Prev | Next >> |