Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
240
250
260
270
280
290
292
293
294
295
296
297
298
299
300
301
302
303
304
310
320
330
340
350
360
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 145 g/m2 to 235 g/m2 Nylon Parachute Fabric | |
| 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (Suitable for nitriding) | |
| 50 G/Square Meters Nylon Parachute Fabric | |
| Acetone for industrial use - Part 1: Specification for acetone | |
| Acetone for Industrial Use - Part 2: Methods of Test | |
| Adjustable Height Walking Frames | |
| AEROSPACE SERIES \x96 Specification for Bolts, Hexagonal Heads (Unified Threads) in Aluminium Alloy, Anodized | |
| Aerospace series \x96 Specification for shear bolts, hexagonal heads (Unified threads) in cadmium-plated steel (Classification Rm = 880-1080 MPa) | |
| AEROSPACE SERIES Procedure for inspection, testing and acceptance of steel sheet and strip | |
| AEROSPACE SERIES Procedure for inspection, testing and acceptance of wrought heat-resisting alloys | |
| AEROSPACE SERIES Specification for nickel-chromium-tita nium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti... | |
| Aircraft Oxygen Systems and Equipment - Part 1: Design and Installation | |
| Aircraft Oxygen Systems and Equipment - Part 2: Testing of Equipment and Systems | |
| Aircraft Oxygen Systems and Equipment - Part 3: Guide to the Physiological Factors | |
| Aircraft Oxygen Systems and Equipment - Part 4: Guide to the Physiological Factors | |
| Aircraft Oxygen Systems and Equipment - Part 5: Guidance and Recommendations on the Selection of Materials for Use with Oxygen | |
| Aircraft oxygen systems and equipment - Part 6: Guidance and recommendations on the selection of materials for use with oxygen | |
| Aircraft Oxygen Systems and Equipment - Part 7: Guide to Cleaning Labelling and Packaging | |
| Aircraft oxygen systems and equipment Part 1: Design and installation | |
| Aircraft oxygen systems and equipment Part 4: Guide to the physiological factors | |
| Aircraft oxygen systems and equipment Part 6: Guidance and recommendations on the selection of materials for use with oxygen | |
| Aircraft Tyres and Rims - Part 1: Specifications | |
| Alternating-current track relays (2-element, 2-position) | |
| Analogue Voltage Ranges and Logic Levels for Mains Operated Nuclear Instruments | |
| Analysis of Butter - Part 1: General Introduction Including Preparations of Samples | |
| Analysis of Butter - Part 3: Method for Determination of Water Content (Routine Method) | |
| Analysis of Butter - Part 4: Method for Determination of Salt Content (Reference Method) | |
| Analysis of Butter - Part 7: Method for Determination of pH of Butter Serum | |
| Analysis of Butter Part 2: Methods for Determination of Water, Solids-Non-Fat and Fat Contents (Reference Method) | |
| Analysis of Butter Part 5: Methods for Determination of Salt Content (Routine Method) | |
| Analysis of butter. Method for determination of free fatty acids in the fat (reference method) | |
| Backed Flexible PVC Flooring Part 1: Needle-Loom Felt Backed Flooring | |
| Backed Flexible PVC Flooring Part 2: Cellular PVC Backing | |
| Bayonet Lampholder | |
| Braided Linen (Flax) Cord for Aerospace Purposes | |
| Butan-1-ol for Industrial Use - Part 1: Specification for Butan-1-ol | |
| Butan-1-ol for Industrial Use - Part 2: Methods of Test | |
| Butterfly Valves | |
| Cadmium-Plated Steel Bolts (Unified Hexagons and Unified Threads) with Close Tolerance Shanks | |
| Carbon Case-Hardening Steel | |
| Cast Iron and Carbon Steel Ball Valves for General Purposes | |
| Cast Iron Gate (Parallel Slide) Valves for General Purposes | |
| Cast Iron Gate Valves | |
| Cast Iron Globe and Globe Stop and Check Valves for General Purposes | |
| Classification for polypropylene plastics materials for moulding and extrusion | |
| Code of Practice for Control of Condensation in Buildings | |
| Code of practice for equipment and procedures for cleaning and disinfecting of milking machine installations | |
| Code of Practice for Internal Non- Loadbearing Partitioning | |
| Code of practice for noise and vibration control on construction and open sites - Part 1: Noise | |
| Code of practice for noise and vibration control on construction and open sites - Part 2: Vibration | |
| Code of Practice for Noise Control on Construction and Demolition Sites Part 1: Code of Practice for Basic Information and Procedures for Noise Control | |
| Code of Practice for Noise Control on Construction and Demolition Sites Part 2: Guide to Noise Control Legislation for Construction and Demolition, Including Road Construction and Maintenance | |
| Code of Practice for Noise Control on Construction and Demolition Sites Part 3: Code of Practice for Noise Control Applicable to Surface Coal Extraction by Opencast Methods | |
| Code of practice for the testing of sulphur hexafluoride taken from electrical equipment | |
| Cold Applied Joint Sealant Systems for Concrete Pavements - Part 1: Specification for Joint Sealants | |
| Cold Applied Joint Sealant Systems for Concrete Pavements - Part 2: Code of Practice for the Application and Use of Joint Sealants | |
| Cold Applied Joint Sealant Systems for Concrete Pavements - Part 3: Methods of Test | |
| Cold Poured Joint Sealants for Concrete Pavements | |
| Concrete Admixtures Part 1: Accelerating Admixtures, Retarding Admixtures, and Water Reducing Admixtures | |
| Concrete Admixtures Part 2: Air-Entraining Admixtures | |
| Concrete Admixtures Part 3: Super Plasticizing Admixtures | |
| Connectors for Ground Electrical Supplies for Aircraft - Part 2: Specification for dimensions | |
| Connectors for Ground Electrical Supplies for Aircraft Part 1: Design, Performance and Test Requirements | |
| Continuous Filament Nylon Sewing Threads for Aerospace Purposes | |
| Contrast Aid Paints Used in Magnetic Particle Flaw Detection | |
| Controlled storage of vulcanized rubbers for use in aerospace applications | |
| Copper Naphthenate Wood Preservatives | |
| Cordage and Webbing Slings and for Fibre Cores for Wire Ropes | |
| Cotton Thread for Aerospace Purposes | |
| Cresylic Acid of Specified Meta-Cresol Content | |
| Cresylic Acid of Specified Ortho-Cresol Content | |
| Crimped Joints for Aircraft Electrical Cables and Wires - Part 2: Specification for Control of Crimping (Including User Control Tests) | |
| Dial-Type Expansion Thermometers | |
| Dimensions of Piezoelectric Devices Part 2: Standard Outlines for Piezoelectric Filters | |
| Dimensions of piezoelectric devices. Part 1: Specification for standard outlines and pin connections for quartz crystal units | |
| Elastomer-Insulated Cables for Electric Signs and High-Voltage Luminous-Discharge-T ube Installations | |
| Embossed credit cards. Magnetic stripe encoding for tracks 1 and 2 | |
| Embossed credit cards. Specifications, numbering system and registration procedure | |
| Engineering diagram drawing practice - Part 3: Recommendations for mechanical/fluid flow diagrams | |
| Engineering Diagram Drawing Practice Part 1: Recommendations for General Principles | |
| Engineering diagram drawing practice Part 2. Recommendations for electrotechnology diagrams | |
| Engineering diagram drawing practice Part 4: Recommendations for logic diagrams | |
| Evaluation of Solution-Polymerized Types of Butadiene Rubber (BR) | |
| Fire hydrant systems equipment - Part 1: Specification for landing valves for wet risers | |
| Fire Hydrant Systems Equipment - Part 2: Specification for Landing Valves for Dry Risers | |
| Fire Hydrant Systems Equipment - Part 3: Specification for Inlet Breechings for Dry Riser Inlets | |
| Fire hydrant systems equipment \x97 Part 5: Specification for Boxes for foam inlets and dry riser inlets | |
| Fishing Nets: Description and Designation of Knotted Netting | |
| Flax harness webbing for aerospace purposes | |
| Framework for Colour Co-Ordination for Building Purposes: Colour Matching Fan | |
| General Principles for Sampling Air- Borne Radioactive Materials | |
| Glass Fibre Filled Polytetrafluoroethyl ene (PTFE) Moulding Powders | |
| Glossary of Production Planning and Control Terms | |
| Glossary of Rheological Terms | |
| Glossary of Terms Relating to Sensory Analysis of Food | |
| Glossary of Terms Used in Assessing the Performance of Optical Devices and Systems | |
| Glossary of Terms used in metrology | |
| Guide to Production Control - Part 1: Introduction | |
| Guide to Production Control - Part 2: Production Programming | |
| Guide to Production Control - Part 3: Ordering Methods | |
| Guide to Production Control - Part 4: Dispatching (Shop-Floor Control) | |
| Guide to Production Control - Part 5: the Relationship Between Production Control and Other Management Functions | |
| Guide to Production Control - Part 6: Computer Aided Production Control | |
| Guide to Stowage of Goods in Freight Containers | |
| Guide to the operation and evaluation of quality assurance systems Part 2. Comprehensive inspection system | |
| Guide to the Principles of Geometrical Tolerancing | |
| Guide to the Selection of Low-Power Magnifiers Used for Visual Inspection | |
| Heavy Duty Linen (Flax) Sewing Thread for Aerospace Purposes | |
| Hospital bedding - Part 4: Mattress covers of polyurethane coated nylon | |
| Hospital Bedding Part 1: Adult Size Spring Interior Mattresses | |
| Hospital Bedding Part 2: Combustion Modified, Flexible Polyurethane, General Purpose Foam Mattress Cores | |
| Hospital Storage Cabinets for Bottled Fluids (Electrically Heated) | |
| Industrial Safety Helmets Part 1: Construction and Performance | |
| Information Interchange on 3.81 mm (0.150 in) Magnetic Tape Cassette at 4 cpmm (100 cpi), Phase Encoded at 63 ftpmm (1600 ftpi) | |
| Ingots and Castings of Aluminium-Magnesium Alloy (Solution Treated) | |
| Inspection and Test of Valves Part 1: Steel Valves for the Petroleum, Petrochemical and Allied Industries | |
| Inspection and Test of Valves Part 2: Pressure Testing Requirements for General Purpose Valves | |
| Laboratory Methods of Test for Determination of Smoke Generation Characteristics of Cellular Plastics and Cellular Rubber Materials Part 1: Method for Testing a 25 mm Cube Test Specimen of Low... | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 5: Guidelines and General Information | |
| Magnetic Tape for Instrumentation Application Part 4: Recording Characteristics (Including Telemetry Systems) Interchange Requirements | |
| Magnetic Tape for Instrumentation Application Part 5: Interchange Practices and Test Methods for Unrecorded Tape | |
| Management of moisture in buildings \x96 Code of practice | |
| Measurement of the Length of Wool Fibres Processed on the Worsted System, Using a Fibre Diagram Machine | |
| Methanol for industrial use - Part 1: Specification for methanol | |
| Methanol for Industrial Use - Part 2: Methods of Test | |
| Method for Determination of Bromine Number of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Method | |
| Method for Determination of Tuft Withdrawal Force of Carpets | |
| Method for Metallographic Replica Techniques of Surface Examination | |
| Method for Specifying the performance of stabilized power supply apparatus | |
| Method for The assessment of drape of fabrics | |
| Method for The Estimation of Equivalent Diameters in the Heat Treatment of Steel | |
| Method for the measurement of speed and contrast of direct-type films for industrial radiography | |
| Method of test for Determination of breaking tenacity of flat bundles of cotton fibres | |
| Method of Test for the Resistance of Fabrics to an Artificial Shower | |
| Methods for chemical analysis of tobacco and tobacco products - Part 18: Determination of vapour-phase nicotine in air (gas-chromatographic method) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 10: Determination of Organochlorine Pesticide Residues | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 11: Determination of Dithiocarbamate Residues | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 12: Determination of Nicotine in Smoke Condensate of Cigarettes (Gas-Chromatographic Method) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 13: Determination of Water in Smoke Condensate of Cigarettes (Gas-Chromatographic Method) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 14: Determination of Total and Nicotine- Free Dry Particulate Matter Using a Routine Analytical Smoking Machine | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 15: Determination of Water in Smoke Condensate of Cigarettes (Karl Fischer Method) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 16: Determination of Carbon Monoxide in the Vapour Phase of Cigarette Smoke (NDIR Method) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 17: Determination of Nicotine Purity (Gravimetric Method Using Tungstosilicic Acid) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 19: Determination of Water Content (Karl Fisher Method) | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 1: Determination of Silica Content | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 4: Determination of Alkaloids in Tobacco: Spectrophotometric Method | |
| Methods for Chemical Analysis of Tobacco and Tobacco Products Part 9: Determination of Alkaloid Retention by Filters of Cigarettes | |
| Methods for chemical analysis of tobacco and tobacco products. Determination of alkaloids in cigarette smoke condensate (spectrophotometric method) | |
| Methods of Chemical Analysis of Tobacco and Tobacco Products Part 3: Expression of Analytical Results | |
| Methods of Test for Cryolite - Part 8: Determination of Calcium Content | |
| Methods of Test for Cryolite | |
| Methods of Test for Footwear and Footwear Materials - Part 1: Adhesives - Section 1.1 Resistance of Adhesive Joints to Heat (Creep Test) | |
| Methods of Test for Footwear and Footwear Materials - Part 1: Adhesives - Section 1.2 Resistance of Adhesive Joints to Peeling | |
| Methods of Test for Footwear and Footwear Materials - Part 1: Adhesives - Section 1.3 Preparation of Test Assemblies Using Adhesives (Other Than Hot Melt Adhesives) for Heat Resistance (Creep)... | |
| Methods of Test for Footwear and Footwear Materials - Part 1: Adhesives - Section 1.6 Recommended Environmental Storage Conditions for Adhesive Joints Prior to Heat Resistance or Peeling Tests | |
| Methods of Test for Footwear and Footwear Materials - Part 1: Adhesives - Section 1.8 Rate of Bond Strength Development in Shear of Hot Melt Adhesives for Lasting | |
| Methods of Test for Footwear and Footwear Materials - Part 1: Adhesives - Section 1.9 Measurement of Green Strength of Adhesive Joints | |
| Methods of Test for Footwear and Footwear Materials - Part 2: Solings - Section 2.11 Resistance of Soilings to Short-Term Contact with a Hot Surface | |
| Methods of Test for Footwear and Footwear Materials - Part 2: Solings - Section 2.7 The Preparation of Test Pieces from Soling Materials for Physical Testing | |
| Methods of Test for Footwear and Footwear Materials - Part 3: Uppers, Textiles and Threads - Section 3.4 Edgewise Compressibility, Upper Materials | |
| Methods of Test for Footwear and Footwear Materials - Part 3: Uppers, Textiles and Threads - Section 3.5 The Break/Pipiness Test | |
| Methods of Test for Footwear and Footwear Materials - Part 4: Other Components - Section 4.1 Resistance to Peeling of Insole Board | |
| Methods of Test for Footwear and Footwear Materials - Part 4: Other Components - Section 4.6 Shear Strength of Ribs Stuck to Insoles | |
| Methods of Test for Footwear and Footwear Materials - Part 4: Other Components - Section 4.7 Resistance to Peeling of Ribs Stuck to Insoles | |
| Methods of test for Footwear and footwear materials - Part 5: Testing of complete footwear - Section 5.11 Determination of the strength of buckle fastening assemblies | |
| Methods of test for Footwear and footwear materials - Part 5: Testing of complete footwear - Section 5.13 Measurement of the strength of stitched seams in upper and lining materials... | |
| Methods of Test for Footwear and Footwear Materials - Part 5: Testing of Complete Footwear - Section 5.4 Sole Bond Peeling Strength | |
| Methods of Test for footwear and footwear materials - Part 5: Testing of complete footwear - Section 5.7 Fatigue test for rigid units and shoe bottoms | |
| Methods of Test for Footwear and footwear materials - Part 6: Codes of practice - Section 6.1 Code of practice for the comparative evaluation by wear trial of materials, components... | |
| Methods of Test for footwear and footwear materials - Part 6: Codes of practice - Section 6.2 Code of practice for the identification in footwear wear trials of major weaknesses... | |
| Methods of Test for Footwear and footwear Materials Part 0. General Introduction | |
| Methods of Test for Footwear and Footwear Materials Part 1: Adhesives Section 1.4: Heat Activation Life of Adhesives | |
| Methods of Test for Footwear and Footwear Materials Part 2: Solings Section 2.6: Split Tear Strength of Cellular Solings | |
| Methods of Test for Footwear and Footwear Materials Part 4: Other Components - Section 4.18 Longitudinal Stiffness of Steel Shanks | |
| Methods of Test for Footwear and Footwear Materials Part 4: Other Components Section 4.12: Fastness of Fibreboard Finishes to Rubbing in the Presence of Water and Perspiration | |
| Methods of Test for Footwear and Footwear Materials Part 4: Other Components Section 4.13: Transverse Tensile Strength of Fibreboard | |
| Methods of Test for Footwear and Footwear Materials Part 4: Other Components Section 4.4: Heel Pin Strength of Fibreboard | |
| Methods of Test for Footwear and Footwear Materials Part 5: Testing of Complete Footwear Section 5.5: Resistance of Finished Footwear to Water Penetration (Trough Test) | |
| Methods of Test for Footwear and Footwear Materials Part 5: Testing of Complete Footwear Section 5.9: Strength of Top Piece Attachment to Shoe Heels | |
| Methods of test for footwear and footwear materials. Other components. Fatigue resistance of heels of ladies' shoes | |
| Methods of test for footwear and footwear materials. Other components. Flexing index of fibreboard | |
| Methods of test for footwear and footwear materials. Other components. Resistance of fibreboard to stitch-tear | |
| Methods of test for footwear and footwear materials. Other components. Resistance of heels of ladies' shoes to lateral impact | |
| Methods of test for footwear and footwear materials. Other components. Tensile strength of fibreboard | |
| Methods of test for footwear and footwear materials. Solings. Measurement of the heat shrinkage of cellular solings | |
| Methods of test for footwear and footwear materials. Solings. Ross flexing method for cut growth resistance of soling materials | |
| Methods of test for footwear and footwear materials. Testing of complete footwear. Adhesion of stuck-on and moulded-on soles | |
| Methods of test for footwear and footwear materials. Testing of complete footwear. Degree of vulcanization of moulded-on rubber soles | |
| Methods of test for footwear and footwear materials. Testing of complete footwear. Impact test for rigid units and shoe bottoms | |
| Methods of test for footwear and footwear materials. Testing of complete footwear. Oven ageing of complete footwear | |
| Methods of test for footwear and footwear materials. Uppers, textiles and threads. Abrasion resistance of shoe laces | |
| Methods of test for footwear and footwear materials. Uppers, textiles and threads. Breaking strength of shoe laces | |
| Methods of Test for Footwear Materials Part 4: Other Components Section 4.20: Force Required to Pull Heel Pins out of Shoe Heels | |
| Methods of test for hoses. Measurement of dimensions | |
| Methods of test for Rubber and plastics hoses and hose assemblies - Part 100: General introduction | |
| Methods of test for Rubber and Plastics Hoses and Hose Assemblies - Part 102: Hydraulic Pressure Tests - Section 102.3: Determination of Volumetric Expansion of Fuel-Dispensing Pump Hoses | |
| Methods of test for rubber and plastics hoses and hose assemblies Part 102. Hydraulic pressure tests Section 102.5 Pressure impulse test for high pressure hydraulic hoses | |
| Methods of test for rubber and plastics hoses and hose assemblies Part 102: Hydraulic pressure tests Section 102.8 Pressure impulse test for rigid helix reinforced thermoplastics hoses | |
| Methods of test for rubber and plastics hoses and hose assemblies Part 103. Physical tests Section 103.12 Determination of vapour transmission of liquids through walls | |
| Methods of Test for Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.8: Determination of Resistance to Steam | |
| Methods of Test for Rubber and Plastics Hoses and Hose Assemblies Part 106: Environmental Tests Section 106.2: General Requirements for High Temperature Ageing Tests | |
| Methods of Test for Rubber and Plastics Hoses and Hose Assemblies- Part 103: Physical Tests Section 103.13: Determination of Resistance to Fire | |
| Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests. Determination of ozone resistance | |
| Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Hydrostatic tests | |
| Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pressure impulse test with flexing for high pressure hydraulic hoses (inverted 'U' configuration) | |
| Methods of Test for Sodium Fluoride for Industrial Use - Part 3: Determination of Fluorine Content | |
| Methods of Test for Sodium Fluoride for Industrial Use - Part 4: Preparation and Storage of Test Samples | |
| Methods of Test for Sodium Fluoride for Industrial Use - Part 5: Determination of Iron Content | |
| Methods of Test for Sodium Fluoride for Industrial Use - Part 6: Determination of Silica Content | |
| Methods of Test for Sodium Fluoride for Industrial Use - Part 7: Determination of Soluble Sulphates Content | |
| Methods of Test for Sodium Fluoride for Industrial Use Part 1: Determination of Water-Insoluble Matter | |
| Methods of Test for Sodium Fluoride for Industrial Use Part 2: Determination of Moisture Content | |
| Methods of Test for Sodium Fluoride for Industrial Use Part 8: Determination of Chlorides Content | |
| Methods of Test for Sodium Fluoride for Industrial Use Part 9: Determination of Carbonate Content | |
| Methods of Test for Structural Fixings in Concrete and Masonry Part 1: Tensile Loading | |
| Methods of Test for Structural Fixings in Concrete and Masonry Part 2: Method for Determination of Resistance to Loading in Shear | |
| Methods of test. Footwear and footwear materials. Uppers, textiles and threads. Strength of upper materials at right angles to stitch perforations | |
| Methods of tests for footwear and footwear materials. Adhesives. The preparation of hot melt adhesive bonded assemblies for heat resistance (creep) and peel tests | |
| Mining type flameproof supply and control units for use on systems up to 1100 V - Part 2: Specification for circuit breaker units | |
| Mining type flameproof supply and control units for use on systems up to 1100 V - Part 3: Specification for air-cooled lighting transformer units | |
| Mining type flameproof supply and control units for use on systems up to 1100 V \x97 Part 1: Specification for direct-on-line motor starters | |
| Mining type flameproof supply and control units for use systems up to 1100 V - Part 4: Specification for air-cooled transformers to power drilling machines | |
| Netting Yarns: Determination of Change in Length After Immersion in Water | |
| Noise and Vibration Control on Construction and Open Sites Part 5: Code of Practice Applicable to Surface Mineral Extraction (Except Coal) Sites | |
| Noise Control on Construction and Open Sites Part 4: Code of Practice for Noise and Vibration Control Applicable to Piling Operations | |
| Non-Refillable Metallic Containers up to 1.4 Litres Capacity and 85 MM Diameter for Liquefied or Compressed Non-Flammable Gases | |
| Ortho-Cresol Meta- Cresol and Para-Cresol | |
| Packages for Washing and Cleaning Powders, Dimensions and Volumes of Cartons and Drums from Fibreboard | |
| Partitions (including matching linings) - Part 1: Code of practice for design and installation | |
| Partitions (including matching linings) - Part 2: Specification for performance requirements for strength and robustness including methods of test UDC 692.25.004.15: | |
| Performance and Construction of Electric Circulating Fans and Regulators | |
| Phosphoric Acid Based Flux for Soft Soldered Joints in Stainless Steel | |
| Photometric Data for Luminaires Part 1: Photometric Measurements | |
| Photometric Data for Luminaires Part 3: Method of Photometric Measurement of Battery-Operated Emergency Lighting Luminaires | |
| Popular Patterns of Dental Extracting Forceps | |
| Pressure - Sensitive Adhesive Paper Masking Tape | |
| Prestressed Concrete Pipes for Drainage and Sewage | |
| Procedure for Inspection and Testing of Textiles | |
| Procedure for Inspection and Testing of Wrought Steels (Other Than Sheet, Strip and Tubes) | |
| Procedure for Inspection, Testing and Acceptance of Aluminium- Base and Magnesium-Base Ingots and Castings | |
| Procedure for Inspection, Testing and Acceptance of Seamless Steel Tubes and Tubestock | |
| Procedure for Inspection, Testing and Acceptance of Wrought Aluminium and Aluminium Alloys | |
| Procedure for inspection, testing and acceptance of wrought heat-resisting alloys | |
| Process of Arc Welding of Carbon and Carbon Manganese Steels | |
| Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 1: Description of Phenomena | |
| Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 2: Methods of Measurement and Procedure for Determining Limits | |
| Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 3: Code of Practice for Minimizing the Generation of Radio Noise | |
| Rationalized Range of Lubricants for Machine Tool Application | |
| Recommendations for application, storage and life expiry of hydraulic rubber hoses and assemblies | |
| Recommendations for bibliographical references to maps and charts. References in accessions lists | |
| Recommendations for bibliographical references to maps and charts. References in books and articles | |
| Representation of elements of data in interchanges using data processing systems. Part 3: Specification for representation of latitude, longitude and altitude for geographical point locations | |
| Rigid Polyurethane (PUR) and Polyisocyanurate (PIR) Foam When Dispensed or Sprayed on a Construction Site - Part 2: Specification for Dispensed Foam for Thermal Insulation or Buoyancy Applications | |
| Rigid Polyurethane (PUR) and Polyisocyanurate (PIR) Foam When Dispensed or Sprayed on a Construction Site Part 1: Sprayed Foam Thermal Insulation Applied Externally | |
| Road Traffic Signals | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 10: General Purpose Induction Motors | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 15: Machines with Type of Protection 'E' Increased Safety) | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 16: Type N Electric Motor | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 17: Machines with Flameproof Enclosure | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 25: D.C. Mill Auxiliary Motors | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 40: Motors for Driving Power Station Auxiliaries | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 60: Stepping Motors | |
| Rotating Electrical Machines of Particular Types or for Particular Applications Part 99: Machines for Miscellaneous Applications | |
| Rubber and Plastics Hoses and Hose Assemblies - Part 102: Hydraulic Pressure Tests - Section 102.4: Determination of Volumetric Expansion of Hydraulic Hoses | |
| Rubber and Plastics Hoses and Hose Assemblies Part 101: Determination of Dimensions Section 101.1: Measurement of Dimensions (Excluding Length) | |
| Rubber and Plastics Hoses and Hose Assemblies Part 101: Determination of Dimensions Section 101.2: Measurement of Length of Hoses and Hose Assemblies | |
| Rubber and Plastics Hoses and Hose Assemblies Part 102: Hydraulic Pressure Tests Section 102.10: Hydrostatic Tests for Oil Suction and Discharge Hose | |
| Rubber and Plastics Hoses and Hose Assemblies Part 102: Hydraulic Pressure Tests Section 102.2: Determination of Volumetric Expansion | |
| Rubber and Plastics Hoses and Hose Assemblies Part 102: Hydraulic Pressure Tests Section 102.7: Pressure Impulse Test with Flexing for High Pressure Hydraulic Hoses (Half Omega Configuration) | |
| Rubber and Plastics Hoses and Hose Assemblies Part 102: Hydraulic Pressure Tests Section 102.9: Determination of Resistance to Vacuum | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Environmental Tests Section 106.4: Determination of Resistance to Ultraviolet Light | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Test Section 103.4: Determination of Flammability of Mining Hoses | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests - Section 103.7: Determination of Fracture Resistance of Rigid Polymer Helical Reinforcement in Thermoplastics Hoses | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.11: Determination of Gas Permeance | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.1: Determination of Adhesion Between Components | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.2: Determination of Crush Resistance of Hoses | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.5: Bending Tests | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.6: Determination of Ignitability of Lining | |
| Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.9: Determination of Abrasion Resistance of the Outer Cover | |
| Rubber and Plastics Hoses and Hose Assemblies Part 104: Electrical Test Section 104.2: Measurement of Electrical Continuity and Discontinuity of Hoses and Hose Assemblies | |
| Rubber and Plastics Hoses and Hose Assemblies Part 104: Electrical Tests Section 104.1: Measurement of Electrical Resistance of Hoses and Hose Assemblies | |
| Rubber and Plastics Hoses and Hose Assemblies Part 106: Environmental Tests Section 106.1: Determination of Low Temperature Flexibility | |
| Rubber and Plastics Hoses and Hose Assemblies Part 3: General Physical Tests | |
| Rubber and Plastics Hoses and Hose Assemblies Part 4: Electrical Tests | |
| Rubber and Plastics Hoses and Hose Assemblies Part 5: Chemical Resistance Tests | |
| Schedule for Environmental Conditions and Test Procedures for Airborne Equipment | |
| Secondary Batteries for Aircraft Part 1: Specification for Lead-Acid Batteries | |
| Security Glazing Part 2: Specification for Bullet-resistant Glazing for Exterior use | |
| Self-Locking Safety Anchorages for Industrial Use Part 1: Specification for Self-Locking Safety Anchorages and associated anchorage lines | |
| Self-locking safety anchorages for industrial use Part 2. Recommendations for selection, care and use | |
| Sheet and Strip of Aluminium-Manganese Alloy (Temper Designation H16 to H26) | |
| Sheet Roof and Wall Coverings Part 14: Corrugated Asbestos Cement | |
| Sheet steels for automobiles | |
| Sleeves and Moulded Components for Aircraft Electric Cables and Equipment Wires - Part 1: Specification for Elastomeric Sleeves for Binding and Identification | |
| Sleeves and moulded components for aircraft electric cables and equipment wires - Part 3: Specification for heat-shrinkable sleeving for binding, insulation, and identification | |
| Soft laid hemp cord for aeronautical purposes | |
| Sound Attenuation of Hearing Protectors Part 1: Subjective Method of Measurement | |
| Specification for 2.5 Per Cent Nickel- Chromium-Molybdenum (High Carbon) Steel Billets, Bars, Forgings and Parts (1230-1420 MPa: Limiting Ruling Section 150 mm) | |
| Specification for 4 per cent nickel-chromium-moly bdenum steel (Air hardening) - (1545 MPa: limiting ruling section 63.5 mm) | |
| Specification for 50A 650V flameproof, restrained and bolted plugs and sockets for use in coal mines | |
| Specification for a.c. metal-enclosed switchgear and controlgear of rated voltage above 1 kV and up to and including 72.5 kV | |
| Specification for adjustable metal walking sticks | |
| Specification for Air Heating and Cooling Coils - Part 1: Method of Testing for Rating of Cooling Coils | |
| Specification for Air Heating and Cooling Coils - Part 2: Method of Testing for Rating of Heating Coils | |
| SPECIFICATION FOR AIRCRAFT MATERIAL 4 PER CENT NICKEL-CHROMIUM-MOLY BDENUM Steel (Air Hardening) (100 tonf/sq in: limiting ruling section 2 1/2 in) | |
| Specification for Aircraft Material Cast iron piston ring pots - (Sand Cast and Chill Cast) | |
| Specification for Aircraft pressure refuelling connectors | |
| Specification for Aluminium Alloy Bolts (Unified Hexagons and Unified Threads) for Aircraft | |
| Specification for Aluminium Alloy, Mushroom-Headed, Slotted Drive, Bolts (Unified Threads) | |
| Specification for aspirated hygrometer | |
| Specification for babies' dummies | |
| Specification for bayonet lamp-caps lampholders and B.C. adaptors (lampholder plugs) | |
| Specification for Book Holders and Prismatic Spectacles for Use as Reading Aids in Hospitals and the Home | |
| Specification for Cadmium-plated steel shear bolts (Unified hexagons and Unified threads) | |
| Specification for Cadmium-Plated, Mushroom-Headed, Unified-Thread, Slotted Drive, Bolts | |
| Specification for Carbon case-hardening steel | |
| Specification for Carbon-Manganese Steel Tube (700 MPa) (Tube 12.5 mm Outside Diameter and Greater) (Weldable) | |
| Specification for Carbon-Manganese Steel Tube (700 N/Square mm) (Tube 12.5 mm Outside Diameter and Greater) (Weldable) | |
| Specification for cast iron and carbon steel plug valves for general purposes | |
| Specification for Cast Iron Check Valves for General Purposes | |
| Specification for chillies and capsicums (whole and ground) | |
| Specification for Classification system for vulcanized rubbers | |
| Specification for copper alloy globe, globe stop and check, check and gate valves | |
| Specification for Corrosion-Resisting Steel Bolts (Unified Hexagons and Unified Threads) for Aircraft | |
| Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads), strength class 880 MPa, for aircraft | |
| Specification for Corrosion-Resisting Steel, Mushroom-Headed, Slotted-Drive, Bolts (Strength a Class 880/1080) | |
| Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts, strength a class 880 MPa | |
| Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts, strength class 880 MPa | |
| Specification for Cylindrical forage tower silos and recommendations for their use | |
| Specification for degummed soya bean oil | |
| Specification for Dental Casting Investments - Part 3: Ethyl Silicate-Bonded investment materials | |
| Specification for Dental Casting Investments Part 1. Gypsum-Bonded Investment Materials | |
| Specification for Dental Casting Investments Part 2. Phosphate-Bonded Dental Casting Investments | |
| Specification for dental vacuum pipeline services | |
| Specification for dimensions of bed blankets | |
| Specification for dimensions of hydraulic connectors and adaptors | |
| Specification for dimensions of metal and plastics travellers for ring spinning and twisting | |
| Specification for Dimensions of Power Take-Off Driving Shafts and Mounting Faces for Small Internal Combustion Engines | |
| Specification for Dimensions of spiral anti-extrusion back-up rings and their housings | |
| Specification for dimensions of tubes for ring spinning, doubling and twisting spindles. Tapers 1:64 and 1:38 | |
| Specification for double flanged cast iron wedge gate valves for waterworks purposes | |
| Specification for embossed credit cards. Magnetic stripe encoding for tracks 1 and 2. Track 3 | |
| Specification for ethanol for industrial use | |
| Specification for fibre cores for wire ropes | |
| Specification for Fire Hydrant Systems Equipment - Part 4: Boxes for Landing Valves for Dry Risers | |
| Specification for Flameproof transformers for use in mines | |
| Specification for flanged steel globe valves, globe stop and check valves and lift type check valves for general purposes | |
| Specification for Flat Quick-Connect Terminations | |
| Specification for Flexible cotton rope for aeronautical purposes | |
| Specification for food and drink vending machines | |
| Specification for forging stock, bars, extruded sections and forgings of 99% aluminium | |
| Specification for Forging Stock, Bars, Extruded Sections and Forgings of Aluminium-2 1/4 Percent Magnesium Alloy | |
| Specification for Fusion Welded Steel Air Receivers | |
| Specification for gear hobs, metric module | |
| Specification for general purpose industrial safety helmets | |
| Specification for General Purpose Rubber Water Hoses | |
| Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1 249 MPa | |
| Specification for general requirements for rotating electrical machines. Built-in thermal protection for electric motors rated at 660 volts a.c. and below | |
| Specification for general requirements for rotating electrical machines. General characteristics | |
| Specification for general requirements for rotating electrical machines. General introduction and index | |
| Specification for general requirements for rotating electrical machines. Mechanical performance - vibration | |
| Specification for general requirements for rotating electrical machines. Noise levels | |
| Specification for general requirements for rotating electrical machines. Test of the insulation of bars and coils of high voltage machines | |
| Specification for general requirements for rotating electrical machines. Tests | |
| Specification for general requirements for rotating electrical machines. Tolerances | |
| Specification for general requirements for rotating electrical machines. Winding terminations | |
| Specification for Grease Guns (Hand-Operated Lever Type) for Use with Cartridges Complying with BS 4507 | |
| Specification for Hospital Bedding - Part 3: Flexible Polyurethane Pillows | |
| Specification for Indirect-acting electrical indicating and recording instruments and their accessories | |
| Specification for Ingots and Castings of \xb4Y\xb4 Aluminium Alloy (Heat Treated) (Suitable for Pistons) | |
| Specification for Jig and Fixture Components | |
| Specification for Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps | |
| Specification for Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2. Lamp Holders | |
| Specification for Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 3: Gauges | |
| Specification for Lamp caps and holders together with gauges for the control of interchangeability and safety Part 4. Lamp caps, lampholders and gauges used in the United Kingdom but not... | |
| Specification for lampholders and starterholders. Bayonet lampholders | |
| Specification for lampholders and starterholders. Built-in lampholders and starter holders for tubular fluorescent lamps | |
| Specification for lifting twistlocks | |
| Specification for lined industrial vulcanized rubber boots | |
| Specification for Lingoes for Jacquard Weaving | |
| Specification for Loose Leaf Binders - Part 1: Ring Binders with Metal Mechanisms | |
| Specification for Magnetic Particle Flaw Inspection of Finished Machined Solid Forged and Drop Stamped CrankShafts | |
| Specification for masonry cement | |
| Specification for Medical specimen containers for microbiology | |
| Specification for non-stick hard based plastics coatings on domestic cookingware | |
| Specification for one-part gun-grade polysulphide-based sealants | |
| Specification for optical performance of reflective agents for use in high-visibility garments and accessories | |
| Specification for patented cold drawn carbon steel wire for mechanical springs | |
| Specification for Performance requirements for joints and compression fittings for use with polyethylene pipes | |
| Specification for permissible limits of metal release from vitreous enamel-ware. Cooking ware and kitchen utensils | |
| Specification for permissible limits of metal release from vitreous enamel-ware. Tableware | |
| Specification for Pewter | |
| Specification for phenol | |
| Specification for Phenolic Resin Bonded Paper Laminated Sheets for Electrical Applications | |
| Specification for Pinion type cutters for spur gears - 1 to 8 metric module | |
| Specification for Pipeline Filters, Filter Bodies and Filter Elements for Milking Installations | |
| Specification for plastic crates to hold 20 one pint milk bottles | |
| Specification for Polyolefin webbing for divans and bed bases | |
| Specification for polytetrafluoroethyl ene (PTFE) tube manufactured from granular powder | |
| Specification for powered lawnmowers | |
| Specification for Pressure - sensitive adhesive water - resistant PVC tape | |
| Specification for Principles Governing the Positioning of Control Keys on Keyboards of Office Machines and Data Processing Equipment | |
| Specification for programming languages for the numerical control of machines. Part 1: Logical structure and major words of processor output (CLDATA) | |
| Specification for programming languages for the numerical control of machines. Part 2: Minor elements of 2000-type records (post-processor commands) | |
| Specification for projector spools for 8 mm Type S and 8 mm Type R spools for motion picture film | |
| Specification for refined cresylic acid | |
| Specification for Representation of Elements of Data in Interchanges Using Data Processing Systems Part 2: Representation of Human Sexes | |
| Specification for requirements for the compatible operation of forage harvesting machinery | |
| Specification for resin-based dental filling materials | |
| Specification for Rigid Urethane Foam When Dispensed or Sprayed on a Construction Site | |
| Specification for Rotating electrical machines of particular types or for particular applications - Part 11: Small-power electric motors and generators | |
| Specification for Rotating Electrical Machines of Particular Types or for Particular Applications - Part 50: Dimensions for Oil Burner Motors | |
| Specification for Rotating Electrical Machines of Particular Types or for Particular Applications General Introduction and Index | |
| Specification for rotating electrical machines of particular types or for particular applications. Part 3: Generators to be driven by reciprocating internal combustion engines | |
| Specification for rotating electrical machines of particular types or for particular applications. Turbine-type machines | |
| Specification for Rubber Hose for Gas Welding and Allied Processes | |
| Specification for Rubber Hoses for Compressed Air | |
| Specification for Rubber Hoses for Low-Pressure and Medium-Pressure Saturated Steam | |
| Specification for Rubber Sandblast Hose | |
| Specification for Safety of Commercial Electrical Appliances Using Microwave Energy for Heating Foodstuffs | |
| Specification for Scoured cotton fabric for inflatable equipment for aerospace purposes | |
| Specification for screw down diaphragm valves for general purposes | |
| Specification for Security Glazing Part 1: Bullet-resistant Glazing for Interior Use | |
| Specification for Shaft Centre Heights | |
| Specification for Sheet and strip of aluminium-manganese alloy - (Temper designation H12 or H22) | |
| Specification for Sheet and strip of aluminium-manganese alloy - (Temper designation\x970) | |
| Specification for Short and long solid-stem thermometers for precision use | |
| Specification for Sizes of film for graphic arts use | |
| Specification for Spark Testing of Electric Cables | |
| Specification for Standard dimensions of scintillators | |
| Specification for standard sizes of silica refractories for use in glass melting furnaces | |
| Specification for Steel Bolts (Unified Hexagons and Unified Threads) for Aircraft | |
| Specification for Steel double hexagon bolts - 1250 MPa (180,000 lbf/in2) for aircraft | |
| Specification for steel gate (parallel slide) valves for general purposes | |
| Specification for sterile hypodermic syringes and needles for single use | |
| Specification for Straightedges - Part 1: Cast Iron Straightedges (Bow Shaped and I-Section) | |
| Specification for Straightedges - Part 2: Steel or Granite Straightedges of Rectangular Section | |
| Specification for surgical instruments with bow handles (excluding scissors). General requirements | |
| Specification for test pieces and test methods for metallic materials. Part 1: Tensile tests. Section 2: Tensile tests - elevated temperature. Metric units | |
| Specification for test pieces and test methods for metallic materials. Part 1: Tensile tests. Uninterrupted creep and rupture tests. Metric units | |
| Specification for Testing machines for rubbers and plastics - Part 2: Constant rate of force application machines | |
| Specification for the Dimensions of Film in Rolls for Phototypesetting and Photolettering Equipment | |
| Specification for Toothpastes | |
| Specification for Tractive Armature Direct Current Neutral-Polar Line Relays for Railway Signalling | |
| Specification for Transportable Gas Containers Part 2: Steel Containers up to 130 Litres Water Capacity with Welded Seams | |
| Specification for Tube of 99% Aluminium - (Cold Drawn: Seamless: Tested Hydraulically) (Not Exceeding 12 mm Wall Thickness) | |
| Specification for Tube of Aluminium - 2 1/4% Magnesium Alloy (Temper Designation - 0) (Seamless: Tested Hydraulically) (Not Exceeding 12 mm Wall Thickness) | |
| Specification for tubes for fluid power cylinder barrels. Steel tubes with specially finished bores | |
| Specification for tubes for fluid power cylinder barrels. Steel tubes with specially finished surfaces for telescopic applications for use in the mining industry | |
| Specification for Varnish for Aerospace Purposes | |
| Specification for Wooden walking sticks | |
| Specification for Woven nylon 6.6 narrow fabrics for aerospace purposes (nominally 940 dtex yarns) | |
| Specification for Woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns) | |
| Specification for zinc phosphate pigment for paints | |
| Specification. Aromatic Disinfectant Fluids | |
| Standard Cells | |
| Steel pan head bolts (Unified threads), cadmium plated for aircraft | |
| Steel Railway Sleepers for Flat Bottom Rails | |
| Steel tubes for automobiles | |
| Sterile Hypodermic Syringes and Needles Part 1: Sterile Hypodermic Syringes for Single Use | |
| Sterile Hypodermic Syringes and Needles Part 2: Specification for Sterile Hypodermic Needles for Single Use | |
| Sulphur Hexafluoride for Electrical Equipment | |
| Surgical Instruments Part 3: Specification for Dissecting Forceps | |
| Surgical Instruments Part 4: Specification for Scissors, Shears and Other Pointed Cutting Instruments | |
| Surgical instruments. Specification for instruments with pivot joints (excluding cutting instruments) | |
| Test Pieces and Test Methods for Metallic Materials for Aircraft | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') - Part 0: General Introduction | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') - Part 1: Methods of Test for Determination of Physical and Chemical Properties - Section 1.5: Coolant Hard Water Stability Test | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 1: Methods of Test for Determination of Physical and Chemical Properties Section 1.1: Ancillary Procedures | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 1: Methods of Test for Determination of Physical and Chemical Properties Section 1.2: Determination of Boiling Point | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 1: Methods of Test for Determination of Physical and Chemical Properties Section 1.4: Determination of Foaming Characteristics | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 2: Methods of Test for Corrosion Inhibition Performance Section 2.2: Glassware Tests | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 2: Methods of Test for Corrosion Inhibition Performance Section 2.3: Recirculating Rig Test | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 2: Methods of Test for Corrosion Inhibition Performance Section 2.4: Static Engine Test | |
| Testing Corrosion Inhibiting, Engine Coolant Concentrate ('Antifreeze') Part 2: Methods of Test for Corrosion Inhibition Performance Section 2.5: Field Test | |
| Testing corrosion inhibiting, engine coolant concentrate (\x93antifreeze\x94) \x97 Part 1: Methods of test for determination of physical and chemical properties \x97 Section 1.3 Determination of freezing point | |
| Testing corrosion inhibiting, engine coolant concentrate (\x93antifreeze\x94) \x97 Part 2: Methods of test for corrosion inhibition performance \x97 Section 2.1 General procedures | |
| Testing corrosion inhibiting, engine coolant concentrate (\x93antifreeze\x94) \x97 Part 2: Methods of test for corrosion inhibition performance \x97 Section 2.6 Test for corrosion of cast aluminium alloys under heat-transfer conditions... | |
| Testing Machines for Rubbers and Plastics Part 1: Constant Rate of Traverse Machines | |
| Tracked Changes (Redline) - AEROSPACE SERIES - Specification for Bolts, Hexagonal heads (Unified threads) in aluminium alloy, anodized | |
| Transportable Gas Containers - Part 7: Specification for Seamless Steel Gas Containers of Water Capacity 0.5 L up to 15 L for Special Portable Applications | |
| Transportable Gas Containers - Part 8: Specification for Seamless Aluminium Alloy Gas Containers of Water Capacity 0.5 L up to 15 L and up to 300 Bar Charged Pressure at... | |
| Transportable Gas Containers Part 1: Seamless Steel Gas Containers Above 0.5 Litre Water Capacity | |
| Transportable Gas Containers Part 3: Specification for Seamless Aluminium Alloy Gas Containers Above 0.5 Litre Water Capacity and up to 300 Bar Charged Pressure at 15 Degrees C | |
| Transportable Gas Containers Part 5: Specification for Aluminium Alloy Containers Above 0.5 Litre up to 130 Litres Water Capacity with Welded Seams | |
| Transportable gas containers. Specification for seamless containers of up to and including 0.5 litre water capacity | |
| Tubes for Fluid Power Cylinder Barrels Part 2: Non-Ferrous Metallic Tubes with Specially Finished Bores | |
| Tubes for fluid power cylinder barrels. Specification for steel tubes with specially finished surfaces for general telescopic applications | |
| Valves for waterworks purposes - Part 1: Predominantly key-operated cast iron gate valves - Code of practice | |
| Valves for waterworks purposes - Part 2: Stem caps for use on isolating valves and associated water control apparatus - Specification | |
| Water-Borne Priming Paints for Woodwork | |
| Wood preservatives - Determination of eradicant action against Hylotrupes bajulus (Linnaeus) larvae (laboratory method) | |
| Wood Preservatives. Determination of the Preventive Action Against Lyctus Brunneus (Stephens) (Laboratory Method) | |
| Wood preservatives. Determination of the toxic values againstAnobium pun ctatum (de Geer) by larval transfer (laboratorymethod) |
| << Prev | Next >> |