Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
230
240
250
260
270
280
286
287
288
289
290
291
292
293
294
295
296
297
298
300
310
320
330
340
350
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| Access Fittings for Chimneys and Other High Structures in Concrete or Brickwork | |
| Access Hooks for Chimneys and Other High Structures | |
| Aluminium Refuse Storage Containers | |
| Analysis of Formulated Detergents - Part 2: Qualitative Test Methods | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.10: Methods for Determination of Short-Chain Alkylbenzenesulphona tes Content | |
| Analysis of formulated detergents - Part 3: Quantitative test methods - Section 3.11 Method for determination of free formaldehyde content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.12: Method for Determination of Ammonia Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.13: Method of Determination of Total Boron Content | |
| Analysis of formulated detergents - Part 3: Quantitative test methods - Section 3.14 Method for determination of carbonate content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.15 Method for estimation of carboxymethylcellulo se content | |
| Analysis of formulated detergents - Part 3: Quantitative test methods - Section 3.16 Method for determination of chloride content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.18: Method for Determination of Chlorine Oxidizing Agents Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.21: Method for Determination of Total Silica Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.22: Method for Determination of Inorganic Sulphate Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.24: Methods for Determination of Low Molecular Mass Alcohols Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.25: Methods for Determination of Water and Volatile Matter Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.5: Methods for Determination of Total Organic Matter Content | |
| Analysis of formulated detergents - Part 3: Quantitative test methods - Section 3.6 Method for determination of matter soluble in light petroleum | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.7: Method for Determination of Total Non-Ionic Matter Content | |
| Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.8: Method for Determination of Alkanolamides Content | |
| Analysis of formulated detergents - Part 3: Quantitative test methods - Section 3.9 Method for determination of soap content | |
| Analysis of Formulated Detergents - Part 4: Physical Test Methods - Section 4.1: Method for Determination of Clear Point of Liquid Detergents | |
| Analysis of formulated detergents \x97 Part 3: Quantitative test methods \x97 Section 3.19 Method for determination of total phosphorus (V) oxide content | |
| Analysis of Formulated Detergents Part 1: Method of Sample Division | |
| Analysis of Formulated Detergents Part 3: Quantitative Test Methods Section 3.17: Method for Determination of Active Oxygen Content | |
| Analysis of Formulated Detergents Part 3: Quantitative Test Methods Section 3.20: Method for Determination of Phosphate Types | |
| Analysis of Formulated Detergents Part 3: Quantitative Test Methods Section 3.26: Method for Determination of High Molecular Mass Cationic-Active Matter Content | |
| Analysis of Formulated Detergents Part 3: Quantitative Test Methods Section 3.2: Method for Determination of Hydrolizable and Non- Hydrolizable Anionic- Active Matter Content After Hydrolysis Under Alkaline | |
| Analysis of Formulated Detergents Part 4: Physical Test Methods Section 4.2: Method for Determination of Apparent Bulk Density | |
| Analysis of formulated detergents. General introduction | |
| Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content | |
| Analysis of formulated detergents. Quantitative test methods. Method for determination of cationic active matter content | |
| Analysis of formulated detergents. Quantitative test methods. Method for determination of chelating agents content | |
| Analysis of formulated detergents. Quantitative test methods. Method for determination of hydrolyzable and non-hydrolyzable anionic-active matter content after hydrolysis under acid conditions | |
| Asbestos-Cement Pipes, Joints and Fittings for Sewerage and Drainage | |
| Assessment of Departures from Roundness - Part 2: Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration) | |
| Assessment of departures from roundness Part 1. Glossary of terms relating to roundness measurement | |
| Assessment of Departures from Roundness Part 3: Methods for Determining Departures from Roundness Using Two - and - Three Point Measurement | |
| Assessment of departures from roundness | |
| Austenitic Stainless Steel Pipes and Tubes for Pressure Purposes Part 1: Specification for Seamless Tubes | |
| Austenitic Stainless Steel Pipes and Tubes for Pressure Purposes Part 2: Specification for Longitudinally Welded Tubes | |
| Basic Symbol to Denote the Actual or Potential Presence of Ionizing Radiation | |
| Bitumens for Building and Civil Engineering Part 1: Specification for Bitumens for Road Purposes | |
| Bitumens for Building and Civil Engineering Part 2: Specification for Bitumens for Industrial Purposes | |
| Bitumens for Building and Civil Engineering Part 3: Specification for Bitumen Mixtures | |
| Breathing Machines for Medical Use | |
| Building and construction sealants - Part 3: Methods of test for application life, skinning properties and tack-free time | |
| Building and construction sealants Part 1. Methods of test for homogeneity, relative density, extrudability, penetration and slump | |
| Building and Construction Sealants Part 2: Methods of Test for Seepage, Staining, Shrinkage, Shelf Life and Paintability | |
| Building and Construction Sealants Part 4: Methods of Test for Adhesion in Peel, Tensile Extension and Recovery and Loss of Mass After Heat Ageing | |
| Carbon and Alloy Steel Pipes and Tubes with Specified Low Temperature Properties for Pressure Purpose | |
| Chairs for Chiropodists' Patients | |
| Coal Preparation Terms | |
| Coated Fabrics for Use in the Manufacture of Water Penetration Resistant Clothing Part 5: Specification for Coated Fabrics for Immersion Suits | |
| Coated Fabrics for Use in the Manufacturer of Water Penetration Resistant Clothing Part 4: Specification for Water Vapour Permeable Coated Fabrics | |
| Coated Fabrics for Water Resistant Clothing Part 1: Specifications for Polyurethane and Silicone Elastomer Coated Fabrics | |
| Coated Fabrics for Water Resistant Clothing Part 3: Specification for Natural Rubber and Synthetic Rubber Polymer Coated Fabrics | |
| Coated fabrics for water resistant clothing. Specification for PVC coated fabrics | |
| Colours for specific purposes | |
| Common names and abbreviations for plastics and rubbers. Principal commercial plastics | |
| Components of Microscopes Part 1: Microscope Cover Slips and Slides and Immersion Fluid | |
| Conversion Factors and Tables Part 1: Basis of Tables. Conversion Factors | |
| Conversion factors for units | |
| Cycle Rear Lamps | |
| Decorative laminated sheets based on thermosetting resins. Methods of determination of properties | |
| Decorative laminated sheets based on thermosetting resins. Reference sample X | |
| Decorative laminated sheets based on thermosetting resins. Reference sample Y | |
| Decorative laminated sheets based on thermosetting resins. Specification | |
| Determination of Resistance of Textile Fabrics to Surface Wetting (Spray Test) | |
| Determination of the Milk Coagulating Power of Rennet | |
| Dictation Equipment Part 1: Glossary of Terms | |
| Dictation Equipment Part 2: Specification for Symbols | |
| Dictation Equipment Part 3: Basic Operating Requirements | |
| Dimensional Tolerances of Solid Moulded and Extruded Rubber Products | |
| Dinghy Buoyancy Equipment | |
| E Glass Fibre Rovings for Reinforcement of Polyester and Epoxy Resin Systems | |
| E Glass Fibre Woven Roving Fabrics for the Reinforcement of Polyester and Epoxy Resin Systems | |
| Endless Wedge Belt Drives and Endless V-Belt Drives | |
| Epoxide Resin Casting Systems for Electrical Applications | |
| Expression and Presentation of Results of Coal Cleaning Tests | |
| Extract from B.S. 3579:1963: 'Heavy duty electric overhead travelling and special cranes for use in steel works'. Appendix A: information to be supplied with the enquiry or order | |
| Film Badges for Personnel Radiation Monitoring | |
| General Recommendations for Manual Inert-Gas Metal-Arc Welding Part 1: MIG Welding of Aluminium and Aluminium Alloys | |
| General Tests for Machine Tools - Part 3: Method of Testing Performance of Machines Operating Under Loaded Conditions in Respect of Thermal Distortion | |
| General Tests for Machine Tools Part 1: Code of Practice for Testing Geometric Accuracy of Machines Operating Under No Load or Finishing Conditions | |
| General tests for machine tools Part 2. Statistical methods for determination of accuracy and repeatability of machine tools | |
| Glossary of Letterpress Rotary Printing Terms Used in Connection with Newspaper, Magazine and Similar Machines | |
| Glossary of Mining Terms - Section 10: Transport | |
| Glossary of Mining Terms - Section 11: Strata Control | |
| Glossary of Mining Terms - Section 1: Planning and Surveying | |
| Glossary of Mining Terms - Section 2: Ventilation | |
| Glossary of Mining Terms - Section 3: Boring and Exploration | |
| Glossary of Mining Terms - Section 4: Drainage | |
| Glossary of Mining Terms - Section 5: Geology | |
| Glossary of Mining Terms - Section 6: Drilling and Blasting | |
| Glossary of Mining Terms - Section 7: Electrical Engineering and Lighting | |
| Glossary of Mining Terms - Section 8: Winning and Working | |
| Glossary of Mining Terms - Section 9: Shafts and Associated Equipment | |
| Glossary of Rubber Terms - Part 2: Additional British Terms | |
| Glossary of Rubber Terms Part 1: International Terms | |
| Glossary of Terms Relating to Ophthalmic Lenses and Spectacle Frames Part 1: Glossary Relating to Ophthalmic Lenses Part 2: Glossary Relating to Spectacle Frames | |
| Glossary of terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to contact lenses | |
| Glossary of terms used in data processing. Analog computing | |
| Glossary of terms used in data processing. Arithmetic and logic operations | |
| Glossary of terms used in data processing. Control, input-output and arithmetic equipment | |
| Glossary of terms used in data processing. Data media, storage and related equipment | |
| Glossary of terms used in data processing. Digital computer programming | |
| Glossary of terms used in data processing. Equipment technology (selected terms) | |
| Glossary of terms used in data processing. Fundamental terms | |
| Glossary of terms used in data processing. Information theory | |
| Glossary of terms used in data processing. Operating techniques and facilities | |
| Glossary of terms used in data processing. Organization of data | |
| Glossary of terms used in data processing. Preparation and handling of data | |
| Glossary of terms used in data processing. Reliability, maintenance and availability | |
| Glossary of terms used in data processing. Representation of data | |
| Glossary of Terms Used in Materials Handling - Part 1: Terms Used in Connection with Pallets, Stillages, Hand and Powered Trucks | |
| Glossary of Terms Used in Materials Handling - Part 3: Terms Used in Connection with Pneumatic and Hydraulic Handling | |
| Glossary of Terms Used in Materials Handling - Part 4: Terms Used in Connection with Cranes | |
| Glossary of Terms Used in Materials Handling - Part 5: Terms Used in Connection with Lifting Tackle | |
| Glossary of Terms Used in Materials Handling - Part 6: Terms Used in Connection with Pulley Blocks | |
| Glossary of Terms Used in Materials Handling - Part 7: Terms Used in Connection with Aerial Ropeways and Cableways | |
| Glossary of Terms Used in Materials Handling - Part 8: Terms Used in Connection with Lifts, Lifting Platforms and Inclined haulages | |
| Glossary of Terms Used in Materials Handling - Part 9: Terms Used in Connection with Rail Transport | |
| Glossary of Terms Used in Materials Handling Part 2: Terms Used in Connection with Conveyors and Elevators (Excluding Pneumatic and Hydraulic Handling) | |
| Glossary of Terms Used in Non-Destructive Testing: Eddy Current Flaw Detection | |
| Glossary of Terms Used in Non-Destructive Testing: Magnetic Particle Flaw Detection | |
| Glossary of Terms Used in Non-Destructive Testing: Penetrant Flaw Detection | |
| Glossary of Terms Used in Non-Destructive Testing: Radiological Flaw Detection | |
| Glossary of Terms Used in Non-Destructive Testing: Ultrasonic Flaw Detection | |
| Glossary of terms used in the rubber industr | |
| Glossary of Terms Used in the Wrought Aluminium Industry | |
| Glossary of Thermal Insulation Terms | |
| Graphical symbols for coal preparation plant | |
| Guide to Design Considerations on the Strength of Screw Threads | |
| GUIDE TO SERIES OF BASIC SIZES FOR METAL SHEET, STRIP AND WIRE | |
| Hardmetal dies and associated hardmetal tools Part 1: Designation and marking of as-sintered pellets and finished dies | |
| Hardmetal dies and associated hardmetal tools Part 2: As-sintered pellets and finished dies for drawing round wire | |
| Hardmetal Dies and Associated Hardmetal Tools Part 3: As-Sintered Pellets and Finished Dies for Drawing Round Bar | |
| Hardmetal Dies and Associated Hardmetal Tools Part 4: Dimensions and Tolerances of As-Sintered Hard-Metal Pellets Used in Heading Dies | |
| High Pressure Mercury Vapour Lamps | |
| Identification of the contents of industrial gas containers | |
| Implants for osteosynthesis - Part 14: Intramedullary nailing systems - Section 14.2 Specification for medullary pins (Rush type) and introducer/extractor s | |
| Implants for osteosynthesis - Part 5: Bone screws and auxiliary equipment - Section 5.5 Specification for taps and drills | |
| Implants for osteosynthesis - Part 6: Skeletal pins and wires - Section 6.1 Specification for general requirements | |
| Implants for Osteosynthesis Part 23: Bone Plates Section 23.2: Specification for Holes and Slots for Use with Screws of 4.5 mm, 4.2 mm, 4.0 mm, 3.9 mm, 3.5 mm and... | |
| Implants for Osteosynthesis Part 23: Bone Plates Section 23.3: Specification for Holes Corresponding to Screws with Asymmetrical Thread and Spherical Undersurfaces | |
| Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.4: Specification for Screws Having Symmetrical and Asymmetrical Thread and Conical Under-Surfaces | |
| Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.6: Specification for the Mechanical Requirements and Test Methods for Screws Having Asymmetrical Thread and Spherical Undersurface | |
| Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.7: Specification for Drill Bits, Taps and Countersink Cutters | |
| Implants for Osteosynthesis Part 6: Skeletal Pins and Wires Section 6.2: Specification for Dimensions of Steinmann Skeletal Pins | |
| Implants for Osteosynthesis Part 6: Skeletal Pins and Wires Section 6.3: Specification for Kirschner Skeletal Wires | |
| Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness | |
| Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for screws having asymmetrical thread and spherical under-surfaces | |
| Independent low pressure governors for appliances burning town gas | |
| Information about blockboard and laminboard | |
| ISO Metric Precision Hexagon Bolts, Screws and Nuts | |
| ISO Metric Screw Threads: Selected Limits of Size | |
| Isolating Transformers and Safety Isolating Transformers - Part 2: Specification for Transformers for Reduced system voltage | |
| Isolating Transformers and Safety Isolating Transformers Part 1: General Requirements | |
| Lightweight Aggregates for Concrete Part 2: Metric Units | |
| Lightweight Aggregates for Masonry Units and Structural Concrete | |
| Machine-Made Shellac | |
| Maintenance Management Terms in Terotechnology | |
| Master Gears: Spur and Helical Gears (Metric Module) | |
| Measurement of liquid flow in open channels - Part 10: Sediment transport - Part 10E: Sampling and analysis of gravel bed material | |
| Measurement of liquid flow in open channels - Part 2: Dilution methods - Part 2D: Methods of measurement using fluorescent tracers | |
| Measurement of liquid flow in open channels - Part 3: Stream flow measurement - Part 3J: Guide to the measurement of discharge using three verticals | |
| Measurement of liquid flow in open channels - Part 8: Measuring instruments and equipment - Part 8H: Method of specifying the performance of hydrometric equipment | |
| Measurement of Liquid Flow in Open Channels - Stream Flow Measurement - Part 3Q: Guidelines for Safe Working Practice in River Flow Measurement | |
| Measurement of liquid flow in open channels Part 10: Sediment transport Part 10D: Methods for determination of concentration, particle size distribution and relative density of sediment in streams and canals... | |
| Measurement of Liquid Flow in Open Channels Part 10B: Sediment Transport Measurement of Suspended Sediment | |
| Measurement of Liquid Flow in Open Channels Part 10C: Sediment Transport: Bed Material Sampling | |
| Measurement of Liquid Flow in Open Channels Part 11: Free Surface Flow in Closed Conduits Part 11A: Methods of Measurement | |
| Measurement of Liquid Flow in Open Channels Part 11: Free Surface Flow in Closed Conduits Part 11b: Specification for Performance and Installation of Equipment for Measurement of Free Surface Flow... | |
| Measurement of Liquid Flow in Open Channels Part 1: Glossary of Terms | |
| Measurement of Liquid Flow in Open Channels Part 2A: Constant Rate Injection | |
| Measurement of Liquid Flow in Open Channels Part 2B: Dilution Methods: Integration (Gulp Injection) Method for the Measurement of Steady Flow | |
| Measurement of Liquid Flow in Open Channels Part 3: Stream Flow Measurement Part 3E: Measurement of Discharge by the Ultrasonic (Acoustic) Method | |
| Measurement of Liquid Flow in Open Channels Part 3: Stream Flow Measurement Part 3H: Electromagnetic Method Using a Full-Channel- Width Coil | |
| Measurement of liquid flow in open channels Part 3: Stream flow measurement Part 3M: Guide to the methods of measuring high discharges in rivers | |
| Measurement of Liquid Flow in Open Channels Part 3A: Stream Flow Measurement: Velocity-Area Methods | |
| Measurement of Liquid Flow in Open Channels Part 3B: Stream Flow Measurement Guide for Establishment and Operation of a Gauging Station | |
| Measurement of Liquid Flow in Open Channels Part 3C: Stream Flow Measurement: Methods for Determination of the Stage-Discharge Relation | |
| Measurement of Liquid Flow in Open Channels Part 3F: Stream Flow Measurement: Collection and Processing of Data for Determination of Errors in Measurement | |
| Measurement of Liquid Flow in Open Channels Part 3G: General Guidelines for the Selection of Methods | |
| Measurement of Liquid Flow in Open Channels Part 4: Weirs and Flumes Part 4D: Compound Gauging Structures | |
| Measurement of Liquid Flow in Open Channels Part 4: Weirs and Flumes Part 4E: Rectangular Broad-Crested Weirs | |
| Measurement of Liquid Flow in Open Channels Part 4A: Weirs and Flumes: Thin-Plate Weirs | |
| Measurement of Liquid Flow in Open Channels Part 4C: Weirs and Flumes: Flumes | |
| Measurement of Liquid Flow in Open Channels Part 4F: Weirs and Flumes: Round-Nose Horizontal Broad-Crested Weirs | |
| Measurement of Liquid Flow in Open Channels Part 4G: Flat-V Weirs | |
| Measurement of Liquid Flow in Open Channels Part 5: Slope Area Method of Estimation | |
| Measurement of Liquid Flow in Open Channels Part 8: Measuring Instruments and Equipment Part 8G: Specification for System Requirements for Hydrometric Telemetry Systems | |
| Measurement of Liquid Flow in Open Channels Part 8A: Current Meters Incorporating a Rotating Element | |
| Measurement of liquid flow in open channels. Dilution methods. Radioisotope techniques | |
| Measurement of liquid flow in open channels. The measurement of liquid level (stage) | |
| Measurement of Liquid Flow in Open Channels: Measuring Instruments and Equipment: Cableway System for Stream Gauging | |
| Measurement of Liquid Flow in Open Channels: Measuring Instruments and Equipment: Calibration of Rotating-Element Current-Meters in Straight Open Tanks | |
| Measurement of Liquid Flow in Open Channels: Measuring Instruments and Equipment: Hydrometric Data Transmission Systems: General | |
| Measurement of Liquid Flow in Open Channels: Measuring Instruments and Equipment: Recommendations for Direct Depth Sounding and Suspension Equipment | |
| Measurement of Liquid Flow in Open Channels: the Measurement of Flow in Tidal Channels | |
| Measurement of Liquid Flow in Open Channels: Water Level Instruments: Float-Operated Water Level Recorders (Mechanical and Electromechanical) | |
| Measurement of Liquid Flow in Open Channels: Water Level Instruments: Installation and Performance of Pressure Actuated Liquid Level Measuring Equipment | |
| Measurement of Liquid Flow in Open Channels: Weirs an Flumes: Guide to the Selection of Flow Gauging Structures | |
| Measurement of Liquid Flow in Open Channels: Weirs and Flumes: V-Shaped Broad Crested Weirs | |
| Measurement of Voltage with Sphere-Gaps (One Sphere Earthed) | |
| Measuring and Expressing the Performance of Television Receivers Part 1: General Considerations and Electrical Measurements Other Than Those at Audio-Frequencies | |
| Measuring and Expressing the Performance of Television Receivers Part 2: Electrical and Acoustic Measurements at Audio Frequencies | |
| Method for determination of ash of paper and board | |
| Method for determination of oils, fats and waxes in wool | |
| Method for Determination of Resistance to Bending of Paper and Board | |
| Method for Determination of solubility of wool in alkali | |
| Method for Determination of Solubility of Wool in Urea-Bisulphite Solution | |
| Method for Measurement of Sound Absorption in a Reverberation Room | |
| Method for the determination of gelatine and oil size in viscose rayon and acetate yarn and fabric | |
| Method for the Evaluation of Results of Accelerated Corrosion Tests on Metallic Coatings | |
| Method for the size-grading of muscovite mica block, thins and films | |
| Methods for Creep and Rupture Testing of Metals Part 1: Tensile Rupture Testing | |
| Methods for Creep and Rupture Testing of Metals Part 3: Tensile Creep Testing | |
| Methods for Creep and Rupture Testing of Metals Part 5: Production Acceptance Tests | |
| Methods for Creep and rupture testing of metals Part 6: Tensile stress relaxation testing | |
| Methods for Mechanical Testing of Metals at Elevated Temperatures: Tensile Testing | |
| Methods for Proving the Gas Tightness of Vacuum or Pressurized Plant | |
| Methods for sampling and testing of lightweight aggregates for concrete | |
| Methods for stability testing of counter balanced-fork lift trucks | |
| Methods for Testing the Accuracy of Machine Tools | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 10: Determination of Silicon 0.020\x960.25 per cent (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 11: Determination of Silicon 0.001\x960.020 per cent (Photometric method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 12: Determination of Sulphur (Combustion Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 13: Determination of Titanium (Photometric method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 14: Determination of Tungsten (Gravimetric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 15: Determination of Zinc (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 16: Determination of Combined and Free Magnesium | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 1: Determination of Aluminium (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 20: Spectrographic Method | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 21: Determination of Magnesium (Atomic Absorption Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 22: Determination of Zinc (Atomic Absorption Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 2: Determination of Boron (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 3: Determination of Carbon | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 4: Determination of Chromium(Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 5: Determination of Cobalt (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 6: Determination of Copper (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 7: Determination of Iron (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 8: Determination of Manganese (Photometric Method) | |
| Methods for The analysis of nickel for use in electronic tubes and valves - Part 9: Determination of Magnesium (Photometric Method) | |
| Methods for the Determination of Calorific Value of Fuel Gases Part 1: Non-Recording Methods | |
| Methods for The sampling and analysis of zinc and zinc alloys - Part 16: Nickel in zinc alloys (photometric method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 11: Indium in Ingot Zinc and Zinc Alloys (Polarographic Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 12: Arsenic in Ingot Zinc and Zinc Alloys (Photometric Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 13: Copper in Zinc Alloys (Alloy B) (Electrolytic Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 14: Cadmium in Zinc (Grades Zn3 and Zn4) (Polarographic Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 15: Magnesium in Zinc Alloys (Atomic Absorption Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 1: Sampling of Ingot Zinc and Zinc Alloy Ingots | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 4: Sampling of Ingot Zinc, Zinc Alloy Ingots and Zinc Alloy Die Castings for Spectrographic Analysis | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 5: Iron in Ingot Zinc and Zinc Alloys (Photometric Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 6: Aluminium in Zinc Alloys (Volumetric Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys Part 7: Lead in Zinc (Grades Zn3 and Zn4) (Polarographic Method) | |
| Methods for the sampling and analysis of zinc and zinc alloys. Magnesium in zinc alloys (gravimetric method) | |
| Methods for the sampling and analysis of zinc and zinc alloys. Thallium in ingot zinc and zinc alloys (photometric method) | |
| Methods for the sampling and analysis of zinc and zinc alloys. Tin in ingot zinc and zinc alloys (photometric method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys: Copper in Ingot Zinc and Zinc Alloy A (Photometric Method) | |
| Methods for the Sampling and Analysis of Zinc and Zinc Alloys: Lead and Cadmium in Zinc (Grades Zn1 and Zn2) and Zinc Alloys (Polarographic Method) | |
| Methods for the Sampling and Testing of Lightweight Aggregates for Concrete Part 2: Metric Units | |
| Methods for thermal shock tests on laboratory glassware | |
| Methods of Fatigue Testing - Part 3: Direct Stress Fatigue Tests | |
| Methods of Fatigue Testing Part 1: General Principles | |
| Methods of Fatigue Testing Part 2: Rotating Bending Fatigue Tests | |
| Methods of Fatigue Testing Part 4: Torsional Stress Fatigue Tests | |
| Methods of Fatigue Testing Part 5: Guide to the Application of Statistics | |
| Methods of measurement of Liquid flow in open channels - Part 3: Stream flow measurement - Part 3D: Moving-boat method | |
| Methods of measurement of liquid flow in open channels. Part 4B: Weirs and flumes. Triangular profile weirs | |
| Methods of measuring and expressing the performance of television receivers | |
| Methods of sampling and testing detergents | |
| Methods of sieve analysis of woodflour | |
| Methods of test for ammonium sulphate | |
| Methods of Test for Polyvinyl Acetate Adhesives for Wood | |
| Methods of Test for the Assessment of Odour from Packaging Materials Used for Foodstuffs | |
| Methods of Testing Small Clear Specimens of Timber | |
| Non-Domestic Space Heaters Burning Town Gas | |
| Phosphor bronze bars and rods for general purposes (grades a and b) | |
| Photographic Grade Ammonium Thiocyanate | |
| Photographic Grade Potassium Carbonate, Anhydrous | |
| Photographic Grade Potassium Ferricyanide | |
| Photographic Grade Potassium Hydroxide | |
| Photographic Grade Potassium Thiocyanate | |
| Photographic Grade Sodium Metabisulphite, Anhydrous | |
| Preparation of Flowsheets for the Design of Coal Preparation Plant | |
| Railway brake coupling hose | |
| Railway Brake Hose - Part 1: Specification for Compressed Air Brake Hose | |
| Railway Brake Hose - Part 2: Specification for Vacuum Brake Hose | |
| Railway signalling symbols - Part 2: Wiring symbols and written circuits | |
| Railway Signalling Symbols Part 1: Schematic Symbols | |
| Recommendation on Preferred Frequencies for Acoustical Measurements | |
| Recommendations for Criticality Safety in Handling and Processing Fissile Materials | |
| Recommendations for Estimating the dryness of saturated steam | |
| Recommendations for Informative Labelling of Textile Floor Coverings | |
| Recommendations for Original Printing Plates | |
| Recommendations for Photometric Integrators | |
| Recommendations for preparing indexes to books, periodicals and other documents | |
| Recommendations for Provision of Space for Domestic Kitchen Equipment | |
| Recommendations for the Design of Scales and Indexes on Analogue Indicating Instruments | |
| Recommendations for the Design of Scales and Indexes: Part A: Recommended Form of Digits for Use on Dials and Scales | |
| Recommendations for the Design of Scales and Indexes: Part B: Geometric Construction of the Recommended Form of Digits for Use on Dials and Scales | |
| Recommendations for the installation of automatic liquid level and temperature measuring instruments on storage tanks | |
| Recommendations for the Selection, Formation and Definition of Technical Terms | |
| Recommendations for the storage of vulcanized rubber | |
| Reels for Magnetic Tape for Instrumentation Applications Part 1: Precision Reels with 76 mm (3 Inch) Centre Hole | |
| Reels for Magnetic Tape for Instrumentation Applications Part 2: General Purpose Reels with 76 mm (3 Inch) Centre Holes | |
| Reels for Magnetic Tape for Instrumentation Applications Part 3: General Purpose Reels with 8 mm (Five Sixteenths of an Inch) Centre Hole | |
| Refined Nickel | |
| Rubber - Tolerances for Products - Part 1: Dimensional Tolerances | |
| Rubber, Balata or Plastics Flat Transmission Belting of Textile Construction for General Use | |
| Sound Level Meters for the Measurement of Noise Emitted by Motor Vehicles | |
| Specification for Allis tissue forceps | |
| Specification for Alloy Steel Shackles | |
| Specification for aluminium baking dishes (other than dishes based on the 530 mm x 325 mm basic module) | |
| Specification for asbestos insulating boards and asbestos wallboards. Imperial units | |
| Specification for asbestos insulating boards and asbestos wallboards. Metric units | |
| Specification for black bitumen oil varnish | |
| Specification for blue-black writing inks | |
| Specification for Brake hose couplings for locomotives and rolling stock | |
| Specification for Calcium Plumbate for Paints | |
| Specification for Calcium plumbate priming paints | |
| Specification for cast epoxide resin insulating material for electrical applications at power frequencies | |
| Specification for Cheese-Pressing Moulds Part 1: Rectangular Moulds | |
| Specification for Cheese-Pressing Moulds Part 2: Circular Moulds | |
| Specification for Clothing for Protection Against Intense Heat for Short Periods | |
| Specification for colours for identification, coding and special purposes | |
| Specification for Concentration Gradient Density Columns | |
| Specification for Convection Type Space Heaters Operating with Steam or Hot Water | |
| Specification for Coolant Pumps for Machine Tools | |
| Specification for Copper Naphthenate and Copper Naphthenate Concentrates | |
| Specification for Counting trays (planchets) for radioactive assay | |
| Specification for Crystal glass | |
| Specification for Dental Inlay Casting Wax | |
| Specification for Dental Wrought Precious Metal Alloy Wire | |
| Specification for Dimensions and Masses Per Unit Length of Welded and Seamless Steel Pipes and Tubes for Pressure Purposes | |
| Specification for Dimensions of Flywheel Housing Mounting Pads and Brackets for I.C. Engines | |
| Specification for Disodium Tetraborates, Technical Grades | |
| Specification for E glass fibre chopped strand mat for the reinforcement of polyester resin systems | |
| Specification for electrical control couplers for diesel locomotives and diesel multiple unit trains | |
| SPECIFICATION FOR ELECTRICALLY-HEATED FOOD CONVEYORS AND CARRIERS | |
| Specification for Electroplated coatings of 65/35 tin/nickel alloy | |
| Specification for Endless V-belt drives for agricultural purposes | |
| Specification for Eyepiece and screen graticules - For the determination of particle size of powders | |
| Specification for Forged Steel Pipe Fittings, Screwed and Socket-Welding for the petroleum industry | |
| Specification for French pattern bow dressing forceps | |
| Specification for Frozen Food Storage Compartments in Refrigerators for Household Use | |
| Specification for galvanized steel wire ropes for ships | |
| Specification for Gas Governors Part 2: Independent Governors for Pressure up to 350 Mbar | |
| Specification for gas governors. Independent governors for inlet pressures up to 25 mbar | |
| Specification for General purpose stools and anaesthetists\x92 chairs for hospital use | |
| Specification for glass-fibre woven tapes for electrical purposes | |
| Specification for Grading of Ash and Hickory Wood Handles for Hand Tools | |
| Specification for Gudgeon Pins up to 200 mm Diameter | |
| Specification for Hand operated plate sided winches | |
| Specification for heavy duty electric overhead travelling and special cranes for use in steel works | |
| Specification for Hose clips (worm drive type) - For general purpose use | |
| Specification for Hypodermic surgical mounted needles (Luer fitting) | |
| Specification for Incinerators - For waste from trade and residential premises - Part 1: Capacities between 50 lb/h and 1000 lb/h | |
| Specification for Industrial methylated spirits | |
| Specification for insulated food containers with integral insulation (including insulated tea urns) | |
| SPECIFICATION FOR INVOLUTE SPLINES | |
| Specification for ISO Metric Screw Threads - Principles and Basic Data | |
| Specification for Laboratory Humidity Ovens (Non-Injection Type) | |
| Specification for leather safety harness for baby carriages with and without leading rein | |
| Specification for Lifejackets | |
| Specification for lighting fittings for general examination purposes in hospitals | |
| Specification for Lightweight salvage sheets for fire service use | |
| Specification for low pressure sodium vapour lamps | |
| Specification for Magnesium-activated nickel for cathodes of electronic tubes and valves | |
| Specification for maleic anhydride | |
| Specification for matches | |
| Specification for Mayo's operating scissors (with dished blades) | |
| Specification for Mayo's tongue and towel forceps | |
| Specification for metric vee blocks | |
| Specification for Microscope Objective and Nosepiece Threads | |
| SPECIFICATION FOR MILD STEEL FOR GENERAL ENGINEERING PURPOSES | |
| Specification for non-flammable solvent-based paint remover | |
| Specification for non-returnable fibreboard tomato trays | |
| Specification for Non-returnable multi-ply paper sacks for loose ware potatoes | |
| Specification for Oil-Extended Styrene-Butadiene Rubbers (SBR) Non-Pigmented, Emulsion Polymerized, General Purpose Types (1700 Series) | |
| Specification for Orthodontic Wire and Tape and Dental Ligature Wire | |
| Specification for orthopaedic calipers made of aluminium alloy | |
| Specification for Park Homes (Mobile Homes) | |
| Specification for Phthalic Anhydride | |
| Specification for Pipe Wrenches - Part 2: Footprint Type Wrenches | |
| Specification for Pipe Wrenches Part 1: Stillson Type Wrenches | |
| Specification for Polyolefin copper-conductor telecommunication cables | |
| Specification for polytetrafluoroethyl ene (PTFE) sheet (metric and imperial units) | |
| Specification for Power-driven travelling jib cranes (rail-mounted low carriage type) | |
| Specification for Precast Concrete Flags | |
| Specification for PVC coated fabrics (cotton and rayon staple) for foul weather clothing | |
| Specification for PVC garden hose | |
| Specification for Railway vacuum brake cylinders - Rolling ring type | |
| Specification for Red and green filters used in ophthalmic dichromatic and dissociation tests | |
| Specification for Rigid PVC sheet | |
| Specification for Ring Wrenches | |
| Specification for Rivets for the attachment of friction linings | |
| Specification for rubber components for refuse containers | |
| Specification for Rubber Condoms | |
| Specification for Safety Isolating Transformers for Industrial and Domestic Purposes | |
| Specification for screw thread measuring cylinders | |
| Specification for Self-sealing fuelling couplings for diesel locomotives and diesel railcars | |
| Specification for Seven-Wire Steel Strand for Prestressed Concrete | |
| Specification for silica gel, cobalt chloride impregnated | |
| Specification for silicone-based water repellents for masonry | |
| Specification for sisal twines for automatic pick up balers and similar machines | |
| Specification for Size designation of children\x92s and infants\x92 wear | |
| Specification for Size designation of women\x92s wear | |
| Specification for sizes of photographic colour materials. Photographic sheet colour paper | |
| Specification for small wire ropes | |
| Specification for Sodium Carbonate (Technical Grades) | |
| Specification for Spirit level vials | |
| Specification for Spring retaining rings \x97 Part 4: Carbon steel circlips \x97 metric series UDC 621.885.7 | |
| Specification for Spring Retaining Rings Part 1. Carbon steel circlips | |
| Specification for Spring retaining rings Part 2: Carbon Steel E Clips | |
| Specification for Spring retaining rings Part 3: Carbon steel C clips | |
| Specification for stainless steel cone joint pipe fittings | |
| Specification for stationary milk tanks (atmospheric type) | |
| Specification for steel pipes and tubes for pressure purposes carbon steel : ordinary duties | |
| Specification for steel pipes and tubes for pressure purposes. Austenitic stainless steel | |
| Specification for steel pipes and tubes for pressure purposes. Carbon steel high duties | |
| Specification for steel pipes and tubes for pressure purposes. Low and medium alloy steel | |
| Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Part 1: Seamless, electric resistance welded and induction welded tubes | |
| Specification for Steel Pipes and Tubes for Pressure Purposes: Carbon and Carbon Manganese Steel with Specified Elevated Temperature Properties Part 2: Submerged Arc Welded Tubes | |
| Specification for steel plate clad with corrosion-resisting steel | |
| Specification for surgical dressing and stitch scissors | |
| Specification for Switches for Domestic and Similar Purposes (For Fixed or Portable Mounting) | |
| Specification for Symbols for Machine Tools - Part 3: Additional General Symbols | |
| Specification for the identification of the emulsion side of edge-marked roll film for still picture cameras | |
| Specification for tin coated finish for culinary utensils | |
| Specification for Treves's toothed dissecting forceps | |
| Specification for unimpregnated asbestos cement boards for electrical purposes | |
| Specification for Unplasticized PVC pipe - For industrial uses | |
| Specification for unplasticized PVC pipe for cold water services | |
| Specification for unsaturated polyester resin systems for low pressure fibre reinforced plastics | |
| Specification for Vitreous Enamel Finishes for Domestic and Catering Appliances | |
| Specification for Vitreous enamelled steel building components | |
| Specification for webbing safety harness for baby carriages and chairs and walking reins | |
| Specification for Wood wool permanent formwork and infill units for reinforced concrete floors and roofs | |
| Specification for X-Ray lead-rubber protective aprons - For personal use | |
| Specification for Zinc Naphthenate and Zinc Naphthenate Concentrates | |
| Specification Mobile Infusion Stands | |
| Specification. Electricity meters. Alternating current precision kilowatt-hour meters for testing purposes | |
| Specification. Electricity meters. Direct current two-wire mercury motor credit-type meters | |
| Specification. Electricity meters. Polyphase kilowatt maximum demand meters | |
| Specification. Electricity meters. Polyphase reactive volt-ampere-hour meters | |
| Specifications for Calcium Chloride (Technical) | |
| Spring retaining rings. Carbon steel clips | |
| Starters for Fluorescent Lamps | |
| Steel Pipes and Tubes for Pressure Purposes: Ferric Alloy Steel with Specified Elevated Temperature Properties Part 1: Seamless and Electric Resistance Welded Tubes | |
| Steel Pipes and Tubes for Pressure Purposes: Ferritic Alloy Steel with Specified Elevated Temperature Properties - Part 2: Specification for Longitudinally Arc Welded Tubes | |
| Steel Tubes for Heat Exchangers | |
| Steel Wire for Hose Reinforcement Part 1: Specification for Coated Round and Flat Steel Wire for Rubber Hose Reinforcement | |
| Steel Wire for Rubber Hose Reinforcement Part 2: Metallic Coated Steel Wire for the Bonded Reinforcement of Hydraulic Hoses | |
| Surgical Implants Part 10: Specification for Classification, Designation of Dimensions and General Requirements for Partial and Total Hip Joint Replacements | |
| Surgical Implants Part 12: Classification and Designation of Dimensions for Knee Joint Prostheses | |
| Surgical Implants Part 13: Specification for Bearing Surfaces of Hip Joint Prostheses | |
| Surgical Implants Part 14: Intramedullary Nailing Systems Section 14.1: Dimensions of Nails of Clover Leaf and V-Shaped Cross Section and Dimensions of Extraction Hooks | |
| Surgical Implants Part 14: Specification for Medullary Pins (Rush Type) and Introducer/Extractor s | |
| Surgical Implants Part 16: Specification for Surgical Implants Made of Heat-Vulcanized Silicone Elastomer | |
| Surgical Implants Part 17: Recommendations for the Care and Handling of Orthopaedic Surgical Implants | |
| Surgical Implants Part 18: Specification for Surgical Bone Screws Having Asymmetrical Thread and Spherical Under-Surfaces | |
| Surgical Implants Part 19: Specification for the Dimensions of Intramedullary Nails of Clover Leaf and V-Shaped Cross Section Made of Stainless Steel or Cobalt-Chromium-Tung sten -Nickel Alloy and Dimensions of... | |
| Surgical Implants Part 1: Specification for Basic Requirements: Finish, Marking and Packaging | |
| Surgical Implants Part 20: Specification for Ultra-High Molecular Mass Polyethylene in Powder Form | |
| Surgical Implants Part 21: Specification for Ultra-High Molecular Mass Polyethylene in Moulded Form | |
| Surgical Implants Part 22: Recommendations for Retrieval and Examination of Orthopaedic Surgical Implants and Associated Tissues | |
| Surgical Implants Part 2: Specification for Materials for Metal Surgical Implants | |
| Surgical Implants Part 3: Specification for Forged Components Made of Wrought Stainless Steel, Wrought Titanium and of Wrought Titanium Alloy | |
| Surgical Implants Part 5: Bone Screws and Auxiliary Equipment Section 5.1: Keys for Use with Screws Having Heads with Hexagon Socket | |
| Surgical Implants Part 5: Bone Screws and Auxiliary Equipment Section 5.2: Screwdrivers for Screws Having Heads with Single Slot, Cruciate Slot or Cross-Recess | |
| Surgical Implants Part 5: Specification for Surgical Bone Screws of 4 mm, 3.5 mm and 3 mm Nominal Sizes, Countersunk Surfaces on Bone Plates, Twist Drills, Taps and Screwdrivers | |
| Surgical Implants Part 6: Specification for Skeletal Pins and Wires | |
| Surgical Implants Part 7: Specification for Acrylic Bone Cement | |
| Surgical Implants Part 8: Specification for Ceramic Materials Based on Alumina | |
| Surgical Implants Part 9: Specification for General Requirements for Orthopaedic Joint Replacements | |
| Surgical implants. Specification for castings made of cobalt-chromium-moly bdenum alloy | |
| Surgical implants. Specification for devices for the fixation of the ends of the femur in adults | |
| Surgical implants. Specification for staples for use in orthopaedic surgery | |
| Switches for Household and Similar Fixed Electrical Installations Part 1: General Requirements | |
| Symbols for machine tool plates | |
| Symbols for Machine Tools - Part 1: General Symbols | |
| Symbols for Machine Tools Part 2. Specification for Numerical Control Symbols | |
| Symbols for Plastics and Rubber Materials - Part 3: Schedule for Symbols for Compounding Ingredients | |
| Symbols for Plastics and Rubber Materials Part 2: Schedule for Symbols for Rubber | |
| Terms Relating to Fibre Ropes and Cordage | |
| Terms Relating to Ophthalmic Optics and Spectacle Frames Part 1: Glossary of Terms Relating to Ophthalmic Lenses | |
| Terms Relating to Ophthalmic Optics and Spectacle Frames Part 2: Glossary of Terms Relating to Spectacle Frames | |
| The International System of units (SI) | |
| Thief resistant lock assembly - Key egress | |
| Thief Resistant Locks | |
| Tracked Changes (Redline) - Lock assemblies operated by key from both the inside and outside of the door | |
| Tracked Changes (Redline) - Railway signalling symbols \x96 Part 2: Specification for symbols for circuit diagrams | |
| Tracked Changes (Redline) - Residential park homes \x96 Specification | |
| Wire Reinforced Rubber Hoses and Hose Assemblies for Hydraulic Installations | |
| Woodworkers' Metal- Bodied Planes |
| << Prev | Next >> |