Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
200
240
250
260
270
280
290
295
296
297
298
299
300
301
302
303
304
305
306
307
310
320
330
340
350
360
400
450
500
550
600
650
1000
1500
1620
| Product Name | Notes |
|---|---|
| 200A Flameproof Restrained and Bolted Plugs and Sockets for Voltages Not Exceeding 1100V, Primarily for Use in Mining | |
| Acetic acid for industrial use - Part 1: Specification for acetic acid | |
| Acetic Acid For Industrial Use - Part 2: Methods of Test for Acetic Acid | |
| Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 1 GHz Part 2: Methods of Measurement of Electrical Performance Parameters | |
| Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range to 30 MHz to 1 GHz Part 1: Specification for Electrical and Mechanical Characteristics | |
| Application Guide for On-Load Tap-Changers | |
| Asbestos-Cement Rainwater Goods | |
| Atmosphere for Conditioning and Testing Tobacco and Tobacco Products | |
| Blow moulded unplasticized PVC containers. Specification for containers up to 5 litres capacity | |
| Boric Acid, Boric Oxide, Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 10: Determination of Matter Insoluble in Alkaline Medium and Preparation of Test Solutions of... | |
| Boric Acid, Boric Oxide, disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 4: Determination of Sodium Oxide, Boric Oxide and Available Oxygen Contents Hydrated Sodium Perborates... | |
| Calibration of Hydrophones | |
| Cellulosic Papers for Electrical Purposes Part 1: Definitions and General Requirements | |
| Cellulosic Papers for Electrical Purposes Part 2: Methods of Test | |
| Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.1: General Purpose Paper | |
| Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.2: Capacitor Paper | |
| Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.3: Crepe Paper | |
| Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.4: Electrolytic Capacitor Papers | |
| Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.5: Special Papers | |
| Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies | |
| Code of Practice for Abatement of Radio Interference from Overhead Power Lines | |
| Code of practice for accuracy in building | |
| Code of Practice for Mechanical Ventilation and Air Conditioning in Buildings | |
| Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low... | |
| Code of practice for the Lining of Vessels and Equipment for Chemical Processes: Copper and Copper Alloys | |
| Code of practice for the safe use of explosives in the construction industry | |
| Code of practice for Use of Masonry Part 1: Unreinforced Masonry | |
| Code of Practice for Ventilation and Heating of Caravans - Part 4: Installation of Electrical Heating Appliances | |
| Code of Practice for Ventilation and Heating of Caravans Part 1: Ventilation | |
| Code of Practice for Ventilation and Heating of Caravans Part 2: Installation of Solid Fuel Fired Heating Appliances | |
| Code of Practice for Ventilation and Heating of Caravans Part 3: Installation of Oil Fired Heating Appliances | |
| Coffee and Coffee Products Part 10: Instant Coffee: Size Analysis | |
| Coffee and Coffee Products Part 1: Green Coffee: Determination of Moisture Content (Basic Reference Method) | |
| Coffee and Coffee Products Part 2: Green Coffee; Determination of Moisture Content (Routine Method) | |
| Coffee and Coffee Products Part 4: Green Coffee: Olfactory and Visual Examination and Determination of Foreign Matter and Defects | |
| Coffee and Coffee Products Part 6: Instant Coffee: Determination of Loss in Mass at 70 Degrees Celsius Under Reduced Pressure | |
| Coffee and Coffee Products Part 7: Determination of Loss in Mass at 105 Degrees Celsius | |
| Coffee and Coffee Products Part 8: Green Coffee: Determination of Proportion of Insect- Damaged Beans | |
| Coffee and Coffee Products Part 9: Instant Coffee: Determination of Insoluble Matter Content Obsolete | |
| Commissioning, Operation and Maintenance of Hydraulic Turbines | |
| Computer Output Microfiche (COM), A6 Size | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 15: Unit Loads: Crate Carrying Chain Conveyors Having Biplanar Chains for Flat-Bottomed Unit Loads | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 16: Unit Loads: Slat Band Chain Conveyors | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 18: Conveyors and Elevators with Chain- Elements: Examples for Guarding of Nip Points | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 19: Belt Conveyors: Examples for Guarding of Nip Points | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 1: General | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 3: Loose Bulk Materials: Storage Equipment Fed by a Pneumatic Handling System | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 5: Loose Bulk Materials: Couplings and Hose Components Used in Pneumatic Handling | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 6: Loose Bulk Materials: Rotary Feeders Used in Pneumatic Handling | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 7: Loose Bulk Materials: Rotary Drum Feeders and Rotary Vane Feeders | |
| Continuous Mechanical Handling Equipment. Safety Requirements Part 8: Loose Bulk Materials: Hand- Operated Power Shovels | |
| Definitions of Radiation in LF, MF and HF Broadcasting Bands - Section 10A-1 - Amplitude-Modulation Sound Broadcasting in Bands 5 (LF), 6 (MF) and 7 (HF) | |
| DEFINITIONS OF RADIATION IN LF, MF AND HF BROADCASTING BANDS | |
| Design of Housing for the Convenience of Disabled People | |
| Designation of the Direction of Rotation and of Cylinders and Valves in Cylinder Heads, and Definition of Right-Hand and Left-Hand in-Line Engines and Locations on an Engine for Reciprocating Internal... | |
| Detection of Corrosive Sulphur in Petroleum- Based Electrical Insulating Oils | |
| Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Procedures for the Determination of Thermal Endurance Properties, Temperature Indices and Thermal Endurance Profiles | |
| Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 2: List of Materials and Available Tests | |
| Dibutyl phthalate | |
| Dimensions of Rotary Masonry and Rotary Masonry Impact Drills with Hardmetal Tips | |
| Earth-Moving Machinery and Tractors and Machinery for Agriculture and Forestry - Seat Index Point | |
| Electricity meters - Part 1: Specification for Class 0.5, 1 and 2 single-phase and polyphase, single rate and multi-rate watt-hour meters | |
| Electricity meters - Part 2: Specification for single-phase coin operated prepayment flat rate and two-part tariff watt-hour meters of Class 2 and fixed charge collectors of Class 2 | |
| Electricity meters - Part 3: Specification for meters having Class 1 electro-mechanical maximum demand indicators | |
| Electricity meters - Part 4: Specification for Class 3 var-hour meters | |
| Electricity meters - Part 5: Specification for input and output switching or logic arrangements for multi-rate registers for electricity meters | |
| Electricity meters - Part 8: Specification for impulse operated multiple registers for use with induction electricity meters | |
| Electro-Acoustical Measuring Equipment for Aircraft Noise Certification | |
| Emergency Exit Devices Part 1: Panic Bolts and Panic Latches Mechanically Operated by a Horizontal Push-Bar | |
| Escalator and moving walks - Safety rules for the construction and installation of escalators and moving walks - Part 2: Code of practice for the selection, installation and location of... | |
| Evaluation of Medical Devices for Biological Hazards Part 11: Method of Test for Haemolysis | |
| Evaluation of Medical Devices for Biological Hazards Part 2: Method of Testing by Tissue Implantation | |
| Evaluation of Medical Devices for Biological Hazards Part 3: Method of Test for Systemic Toxicity; Assessment of Acute Toxicity of Extracts from Medical Devices | |
| Evaluation of medical devices for biological hazards Part 4: Method of test for intracutaneous reactivity of extracts from medical devices | |
| Evaluation of Medical Devices for Biological Hazards Part 5: Method of Test for Systemic Toxicity; Assessment of Pyrogenicity in Rabbits of Extracts from Medical Devices | |
| Evaluation of Medical Devices for Biological Hazards Part 6: Methods of Test for Sensitization; Assmt. of the Potential of Medical Devices to Produce Delayed Contact Dermatitis | |
| Evaluation of Medical Devices for Biological Hazards Part 7: Method of Test for Skin Irritation of Extracts from Medical Devices | |
| Evaluation of Medical Devices for Biological Hazards Part 8: Method of Test for Skin Irritation of Solid Medical Devices | |
| Evaluation of Medical Devices for Biological Hazards Part 9: Method of Test for Eye Irritation | |
| Evaluation of medical devices for biological hazards. Guide for the selection of biological methods of test | |
| Explanatory supplement to BS 5655 'Lifts and service lifts' Part 1 'Safety rules for the construction and installation of electric lifts' (EN 81:Part 1) | |
| Fork Arms for Fork Lift Trucks Part 2: Mounting Dimensions of Hook-On Type Fork Arms and Fork Carriers | |
| Fork Arms for Fork Lift Trucks Part 3: Recommendations for Dimensions of Fork Arms | |
| Fork Arms for Fork Lift Trucks Part 4: Specification for Technical Characteristics and Testing | |
| Fork Arms for Fork Lift Trucks Part 5: Guide for Inspection and Repair of Fork Arms in Service | |
| Fork Arms for Fork Lift Trucks- Part 1: Vocabulary for Hook-On Type Fork Arms | |
| Frequency Weighting for the Measurement of Aircraft Noise (D-Weighting) | |
| General requirements for electrical accessories - Specification | |
| General Requirements for Electrical Accessories | |
| Glossary of Refrigeration, Heating, Ventilating and Air-Conditioning Terms | |
| Glossary of terms relating to timber and woodwork. | |
| Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 3: Instructions for Calculating Thermal Endurance Characteristics Section 3.1 Calculations Using Mean Values of Normally Distributed Complete... | |
| Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 4: Ageing Ovens Section 4.1: Single Chamber Ovens | |
| Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 5: Guidelines for the Application of Thermal Endurance Characteristics | |
| Guide to Data Analysis and Quality Control Using Cusum Techniques - Part 2: Decision Rules and Statistical Tests for Cusum Charts and Tabulations | |
| Guide to Data Analysis and Quality Control Using Cusum Techniques - Part 4: Cusums for Counted/Attributes Data | |
| Guide to Data Analysis and Quality Control Using Cusum Techniques Part 1: Introduction to Cusum Charting | |
| Guide to Data analysis and quality control using cusum techniques Part 3: Cusum methods for process/quality control by measurement | |
| Guide to Number- Defective Charts for Quality Control | |
| Guide to pulse techniques and apparatus. Pulse measurement and analysis, general considerations | |
| Guide to pulse techniques and apparatus. Pulse terms and definitions | |
| Guide to quality control and performance improvement using qualitative (attribute) data - Part 1: Uses and value of attribute charts in business, industry, commerce and public service | |
| Guide to quality control and performance improvement using qualitative (attribute) data - Part 2: Fundamentals of standard attribute charting for monitoring, control and improvement | |
| Guide to quality control and performance improvement using qualitative (attribute) data - Part 3: Technical aspects of attribute charting: special situation handling | |
| Guide to quality control and performance improvement using qualitative (attribute) data - Part 4: Attribute inspection performance control and improvement | |
| Guide to Statistical Process Control (SPC) Charts for Variables - Part 1: Charts for Mean, Median, Range and Standard Deviation | |
| Guide to statistical process control (SPC) charts for variables - Part 2: Charts for individual values | |
| Guide to statistical process control (SPC) charts for variables - Part 3: Charting techniques for short runs and small mixed batches | |
| Guide to Stock control - Part 5: Storekeeping | |
| Guide to Stock Control Part 1: Introduction to Management of Stock Control | |
| Guide to Stock Control Part 2: Demand Assessment | |
| Guide to Stock Control Part 3: Replenishment of Stock | |
| Guide to Stock Control Part 4: Data Processing | |
| Guidelines for the establishment and development of monolingual thesauri | |
| Hydrophones for Calibration Purposes | |
| Insulating Varnishes Containing Solvent Part 1: Definitions and General Requirements | |
| Insulating Varnishes Containing Solvent Part 2: Test Methods | |
| Insulating Varnishes Containing Solvent Part 3: Method for Specifying Requirements for Individual Materials | |
| Insulation Co-Ordination Part 1: Terms, Definitions, Principles and Rules | |
| Insulation Co-Ordination Part 2: Application Guide | |
| Iron Ores - Sampling and Sample Preparation Procedures | |
| Lifts and service lifts - Part 10: Specification for the testing and examination of lifts and service lifts - Section 10.1 Electric lifts - Subsection 10.1.1 Commissioning tests for new... | |
| Lifts and service lifts - Part 10: Specification for the testing and examination of lifts and service lifts - Section 10.2 Hydraulic lifts - Subsection 10.2.1 Commissioning tests for new... | |
| Lifts and service lifts - Part 13: Recommendations for vandal resistant lifts | |
| Lifts and service lifts - Part 5: Specification for dimensions of standard lift arrangements | |
| Lifts and Service Lifts - Part 7: Specification for manual control devices, indicators and additional fittings | |
| Lifts and service lifts - Part 8: Specification for eyebolts for lift suspension | |
| Lifts and Service Lifts \x97 Part 14: Specification for Hand-Powered Service Lifts and Platform Hoists | |
| Lifts and Service Lifts Part 10: Testing and Inspection of Electric and Hydraulic Lifts | |
| Lifts and Service Lifts Part 11: Recommendations for the Installation of New, and the Modernization of, Electric Lifts in Existing Buildings | |
| Lifts and Service Lifts Part 12: Recommendations for the Installation of New, and the Modernization of, Hydraulic Lifts in Existing Buildings | |
| Lifts and Service Lifts Part 1: Safety Rules for the Construction and Installation of Electric Lifts | |
| Lifts and Service Lifts Part 3: Specification for Electric Service Lifts | |
| Lifts and Service Lifts Part 9: Guide Rails | |
| Lifts and service lifts. Code of practice for selection and installation | |
| Lifts and service lifts. Specification for hydraulic lifts | |
| Lighting Columns - Part 8: Method for Verification of Structural Design by Testing | |
| Lighting columns \x97 Part 3: Specification for materials and welding requirements | |
| Lighting columns \x97 Part 4: Recommendations for surface protection of metal lighting columns | |
| Lighting columns \x97 Part 6: Specification for design loads | |
| Lighting Columns Part 2: Dimensions and Tolerances | |
| Lighting Columns Part 5: Base Compartments and Cableways | |
| Lighting Columns Part 7: Method for Verification of Structural Design by Calculation | |
| Lighting Columns Part 9: Special Requirements for Reinforced and Prestressed Concrete Lighting Columns | |
| Loose-Leaf Publications | |
| Lung Ventilators Part 1: Particular Requirements for Critical Care Ventilators | |
| Macroscopic Assessment of the Content of Non-Metallic Inclusions in Wrought Steels | |
| Maintenance of Insulating Oil | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 1: Single Meters | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 2: Installation Requirements for Meters Supplement 1: Parallel and Multiple Meter Operation | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 2: Installation Requirements for Single Meters | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 3: Methods of Determining Principal Characteristics of Meters | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 4: Combination Meters | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 5: Installation Requirements for Combination Meters | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 6: Test Methods for Combination Meters | |
| Measurement of Flow of Cold Potable Water in Closed Conduits Part 7: Specification for Single Mechanical Type Meters | |
| Measurement of Non- Linearity in Resistors | |
| Measurement of Relative Permittivity, Dielectric Dissipation Factor and d.c. Resistivity of Insulating Liquids | |
| Measurement of the Dimensions of a Cylindrical Electronic Component Having Two Axial Terminations | |
| Medical electrical equipment - Part 2: Particular requirements for safety - Section 2.14 Specification for electroconvulsive therapy equipment - (Implementation of CENELEC HD 395.2.14 S1) | |
| Medical electrical equipment - Part 2: Particular requirements for safety - Section 2.6 Specification for microwave therapy equipment - (Implementation of CENELEC HD 395.2.6) | |
| Medical Electrical Equipment - Part 3: Particular Requirements for Performance - Section 3.1 Methods of Declaring Functional Performance Characteristics of Medical Electron Accelerators in the Range 1 MeV to 50... | |
| Medical Electrical Equipment - Part 3: Particular Requirements for Performance - Section 3.12: Method of Declaring Parameters for Lung Ventilators | |
| Medical Electrical Equipment - Part 3: Particular Requirements for Performance - Section 3.26: Method for Declaring Parameters for Ultrasonic Diagnostic Equipment Using Test Objects | |
| Medical electrical equipment \x97 Part 2: Particular requirements for safety \x97 Section 2.4 Specification for cardiac defibrillators and cardiac defibrillator-monito rs | |
| Medical Electrical Equipment Part 1: General Requirements for Safety Section 1.1: Collateral Standard: Safety Requirements for Medical Electrical Systems | |
| Medical Electrical Equipment Part 1: Specification for General Safety Requirements | |
| Medical electrical equipment Part 2. Particular requirements for safety Section 2.29 Specification for peritoneal dialysis equipment | |
| Medical electrical equipment Part 2. Particular requirements for safety Section 2.30 Specification for capnometers for use with humans | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.10: Specification for Nerve and Muscle Stimulators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.119: Specification for Baby Incubators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.120: Specification for Transport Incubators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.122: Specification for Diagnostic and Therapeutic Laser Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.123: Specification for Transcutaneous Partial Pressure Monitoring Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.125: Specification for Electrocardiographs | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.129: Specification for Radiotherapy Simulators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.12: Specification for Lung Ventilators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.13: Specification for Anaesthetic Machines | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.15: Specification for Capacitor Discharge X-Ray Generators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.16: Specification for Haemodialysis Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.17: Remote Controlled Automatically Driven Gamma Ray Afterloading Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.22: General Operating Tables | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.24: Specification for Humidifiers | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.25: Servo-Controlled Infant Radiant Warmer | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.27: Specification for Oxygen Analyzers for Monitoring Patient Breathing Mixtures | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.28: Suction Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.2: High Frequency Surgical Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.3: Short Wave Therapy Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.5: Specification for Safety of Ultrasonic Therapy Equipment | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.7: High Voltage Generators of Diagnostic X-Ray Generators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.8: Specification for Therapeutic X-Ray Generators | |
| Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.9: Specification for Dosimeters Used in Radiotherapy with Electrically-Connect ed Radiation Detectors | |
| Medical electrical equipment Part 3: Particular requirements for performance Section 3.1 Methods of declaring functional performance characteristics of medical electron accelerators in the range 1 MeV to 50 MeV Supplement... | |
| Medical Electrical Equipment Part 3: Particular Requirements for Performance Section 3.129: Methods of Declaring Functional Performance Characteristics of Radiotherapy Simulators Supp. 1: Guide to Function Performance Values | |
| Medical electrical equipment. Part 2: Particular requirements for safety. Section 2.11: Specification for gamma beam therapy equipment | |
| Medical electrical equipment. Particular requirements for safety. Specification for medical electron accelerators in the range 1 MeV to 50 MeV | |
| Medical electrical equipment. Particular requirements for safety. Specification for oxygen concentrators for hospital and domiciliary use | |
| Method (precision) for free-field calibration of one-inch standard condenser microphones by the reciprocity technique | |
| Method (Precision) for the Pressure Calibration of One-Inch Standard Condenser Microphones by the Reciprocity Technique | |
| Method (simplified) for pressure calibration of one-inch condenser microphones by the reciprocity technique | |
| Method for Describing Aircraft Noise Heard on the Ground | |
| Method for specifying the performance of digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors | |
| Method of measurement of resistivity of metallic materials | |
| Method of Presentation of Lubrication Instructions for Machine Tools | |
| Method of test for determination of the abrasion resistance of fabrics | |
| Method of test for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions | |
| Method of test for the determination of the permeability of fabrics to air | |
| Methods for Crack Opening Displacement (COD) Testing | |
| Methods for the determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers: methylene blue photometric method and silver sulphide densitometric method | |
| Methods of analysis of Wood Preservatives and Treated Timber - Part 4: Quantitative Analysis of Preservatives and Treated Timber Containing Copper Naphthenate | |
| Methods of analysis of Wood Preservatives and Treated Timber - Part 5: Determination of Zinc Naphthenate in Preservative Solutions and Treated Timber | |
| Methods of analysis of Wood Preservatives and Treated Timber - Part 6: Quantitative Analysis or Preservative Solution and Treated Timber Containing Pentachlorophenol, Phenachloro- phenyl Laurate, y-Hexachlorocyclohex ane and Dieldrin | |
| Methods of analysis of wood preservatives and treated timber. General considerations and sampling and preparation of materials for analysis | |
| Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives and treated timber containing copper/chromium/arse nic formulations | |
| Methods of analysis of wood preservatives and treated timber. Quantitative analysis of preservatives containing bis(tri | |
| Methods of analysis of Wood Preservatives and Treatment Timber - Part 2: Qualitative Analysis | |
| Methods of Sampling and Test for Glycerol Part 0: General Introduction | |
| Methods of Sampling and Test for Glycerol Part 10: Determination of Arsenic Content: Silver Diethyldithiocarbama te Method | |
| Methods of Sampling and Test for Glycerol Part 11: Determination of Propane, 1,3-Diol Content: Gas Chromatographic Method | |
| Methods of Sampling and Test for Glycerol Part 12: Determination of Chloride Content | |
| Methods of Sampling and Test for Glycerol Part 13: Limit Test for Chloride | |
| Methods of Sampling and Test for Glycerol Part 14: Limit Test for Organic Chloride | |
| Methods of Sampling and Test for Glycerol Part 15: Determination of Heavy Metals Content | |
| Methods of Sampling and Test for Glycerol Part 16: Determination of Iron Content | |
| Methods of Sampling and test for Glycerol Part 17: Limit Test for Lead | |
| Methods of Sampling and Test for Glycerol Part 18: Detection of Sugars | |
| Methods of Sampling and Test for Glycerol Part 19: Assessment of Odour | |
| Methods of Sampling and Test for Glycerol Part 1: Samples and Test Methods: General | |
| Methods of Sampling and Test for Glycerol Part 20: Test for Reducing Substances | |
| Methods of Sampling and Test for Glycerol Part 21: Determination of Saponification Equivalent | |
| Methods of Sampling and Test for Glycerol Part 22: Additional Methods of Test (Non-Specification) | |
| Methods of Sampling and Test for Glycerol Part 2: Methods of Sampling | |
| Methods of Sampling and Test for Glycerol Part 3: Determination of Glycerol Content | |
| Methods of Sampling and Test for Glycerol Part 4: Determination of Density and Relative Density | |
| Methods of Sampling and Test for Glycerol Part 6: Determination of Ash: Gravimetric Method | |
| Methods of Sampling and Test for Glycerol Part 7: Determination of Sulphated Ash: Gravimetric Method | |
| Methods of Sampling and Test for Glycerol Part 8: Determination of Water Content: Karl Fischer Method | |
| Methods of Sampling and Test for Glycerol Part 9: Calculation of Matter (Organic) Non- Glycerol (MONG) | |
| Methods of Sampling and Test for Glycerol | |
| Methods of sampling iron ores - increment sampling - manual method | |
| Methods of sampling iron ores - Part 1: Manual method of increment sampling | |
| Methods of Sampling Iron Ores Part 3: Experimental Methods for Checking the Bias of Sampling | |
| Methods of sampling iron ores. Experimental methods for checking the precision of sampling | |
| Methods of sampling iron ores. Experimental methods for evaluation of quality variation | |
| Methods of test for acid-grade fluorspar. Determination of sulphide content | |
| Methods of test for acid-grade fluorspar. Determination of total phosphorus content | |
| Methods of test for Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrial use Part 12: Determination of total titanium content of crude sodium borates... | |
| Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrialuse. Determination of alkali-soluble copper and manganese contents of crude sodium borates | |
| Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrialuse. Determination of carbonate content of crude sodium borates | |
| Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrialuse. Determination of cobalt content of boric acid, boric oxide and disodium tetraborates... | |
| Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrialuse. Determination of degree of attrition of sodium perborates | |
| Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrialuse. Determination of total nickel content of boric acid, boric oxide and disodium... | |
| Methods of test for boric acid, boric oxide | |
| Methods of test for Coffee and coffee products - Part 11: Instant coffee: determination of free-flow and compacted bulk densities | |
| Methods of test for Coffee and coffee products - Part 12: Coffee: determination of caffeine content (routine method by HPLC) | |
| Methods of test for Coffee and coffee products - Part 3: Coffee: determination of caffeine content (reference method) | |
| Methods of Test for Coffee and Coffee Products Part 13: Roasted Ground Coffee: Determination of Moisture Content (Karl Fischer Method (Reference Method)) | |
| Methods of Test for Coffee and Coffee Products Part 14: Roasted Ground Coffee: Determination of Moisture Content (Loss in Mass at 103 Degrees C (Routine Method)) | |
| Methods of Test for Coffee and Coffee Products Part 15: Instant Coffee: Determination of Free and Total Carbohydrate Contents by High Performance Anion-Exchange Chromatography | |
| Methods of Test for Coffee and Coffee Products Part 16: Green and Roasted Coffee: Determination of Free- Flow Bulk Density of Whole Beans (Routine Method) | |
| Methods of Test for Coffee and Coffee Products Part 5: Green Coffee: Size Analysis by Manual Sieving | |
| Methods of test for evaluation of vulcanization characteristics for raw natural rubbers | |
| Methods of test for olefins. Determination of traces of water in propylene: Karl Fischer method | |
| Methods of Test for Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 18: Determination of Rate of Solution... | |
| Methods of Test for Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 1: Determination of Boric Acid Content... | |
| Methods of Test for Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 27: Detn. of Total and Alkali-Soluble... | |
| Methods of Test for Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 28: Determination of Total and AlkaliSoluble... | |
| Methods of Test for Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 2: Determination of Boric Oxide Content... | |
| Methods of test for Potassium Hydroxide | |
| Methods of testing iron ores - determination of moisture content | |
| Methods of testing iron ores - preparation of samples | |
| Methods of Testing Iron Ores Part 1: Determination of Moisture Content | |
| Methods of Testing Iron Ores Part 2: Determination of Size Distribution by Sieving | |
| Methods of Testing Iron Ores Part 3: Iron Ore Fines - Presentation of the Results of Sintering Tests | |
| Microbiological Safety Cabinets Part 1: Specification for Design, Construction and Performance Prior to Installation | |
| Microbiological Safety Cabinets Part 2: Recommendations for Information to Be Exchanged Between Purchaser, Vendor and Installer and Recommendations for Installation | |
| Microbiological Safety Cabinets Part 3: Specification for Performance After Installation | |
| Microbiological Safety Cabinets Part 4: Recommendations for Selection, Use and Maintenance | |
| Microbiological Safety Cabinets | |
| Microfilm Jackets, A6 Size | |
| Mountings and Apertures for External Equipment Controls on Agricultural and Forestry Tractors | |
| Non-Returnable Corrugated Cases for Apples | |
| Orthoboric Acid (Boric (Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 8: Determination of Sodium Oxide and Boric Oxide Contents of... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borages for Industrial Use Part 9: Detn. of Loss in Mass of Crude Sodium Borates... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 11: Determination of Total Aluminium Content of Crude Sodium Borates... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 13: Determination of Particle Size Dist. of Sodium Perborates by... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 14: Determination of Chromium Content of Boric Acid, Boric Oxide... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 15: Determination of Water Content of Di Sodium Tetraborates and... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 16: Determination of Chloride Content of Boric Acid, Boric Oxide... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 19: Determination of Iron Soluble in Alkaline Medium in Crude... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 20: Determination of Aluminium Soluble in Alkaline Medium in Crude... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 21: Determination of Bulk Density of Sodium Perborates | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 3: Detn. of Sodium Oxide and Boric Oxide Contents and... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 5: Detn. of Sulphur Compounds in Boric Acid, Boric Oxide,... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 6: Detn. of Manganese Content of Boric Acid, Boric Oxide... | |
| Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 7: Determination of Copper Content of Boric Acid, Boric Oxide... | |
| Orthoboric Acid, Diboron Trioxide, Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 17: Deter of Iron Content of Boric Acid, Boric Oxide, Disodium Tetraborates, Sodium Perborates... | |
| Orthoboric Acid, Diboron Trioxide, Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 29: Determination of Total and Alkali-Soluble Calcium and Magnesium Contents of Crude Sodium Borates... | |
| Particleboard Part 1: Methods of Sampling, Conditioning and Test | |
| Particleboard Part 2: Wood Chipboard | |
| Particleboard Part 3: Specification for Oriented Strand Board (OSB) | |
| Particleboard Part 4: Cement Bonded Particleboard | |
| Particleboard Part 5: Code of Practice for the Selection and Application of Particleboards for Specific Purposes | |
| Petroleum products - gasoline - determination of lead content - iodine monochloride method | |
| Play Equipment Intended for Permanent Installation Outdoors Part 1: Methods of Test | |
| Play Equipment Intended for Permanent Installation Outdoors Part 3: Code of Practice for Installation and Maintenance | |
| Play equipment intended for permanent installation outdoors. Recommendations for minimizing hazards in equipment | |
| Polyester moulding compounds for electrical and other purposes. Methods of test | |
| Polyester moulding compounds for electrical and other purposes. Specification for dough moulding compounds for electrical purposes | |
| Polyester moulding compounds for electrical and other purposes. Specification for dough moulding compounds for mechanical purposes | |
| Polyester moulding compounds for electrical and other purposes. Specification for sheet moulding compounds for mechanical purposes | |
| Powder metallurgical materials and products Part 4. Methods of testing and chemical analysis of hardmetals Section 4.14 Metallographic determination of porosity and uncombined carbon | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.17: Chemical Analysis by Flame Atomic Absorption Spectrometry Subsection 4.17.1: General Requirements | |
| Powder metallurgical materials and products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.17: Chemical Analysis by Flame Atomic Absorption Spectrometry Subsection 4.17.2: Determination of Calcium, Potassium,... | |
| Powder metallurgical materials and products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.17: Chemical Analysis by Flame Atomic Absorption Spectrometry Subsection 4.17.3: Determination of Cobalt, Iron,... | |
| Powder metallurgical materials and products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.17: Chemical Analysis by Flame Atomic Absorption Spectrometry Subsection 4.17.4: Determination of Molybdenum, Titanium... | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.17: Chemical Analysis by Flame Atomic Absorption Spectrometry Subsection 4.17.5: Determination of Cobalt, Iron,... | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.17: Chemical Analysis by Flame Atomic Absorption Spectrometry Subsection 4.17.6: Determination of Chromium in... | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.3: Determination of Cobalt: Potentiometric Method | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.4: Determination of Density | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.5: Rockwell Hardness Test (Scale A) | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.7: Determination of Young\xb4s Modulus | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.8: Determination of Transverse Rupture Strength | |
| Powder Metallurgical Materials and Products Part 4: Methods of Testing and Chemical Analysis of Hardmetals Section 4.9: Determination of (the Magnetization) Coercivity | |
| Powder Metallurgical Materials and Products Part 5: Material Specifications for Sintered Metal Products, Excluding Hardmetals Section 5.2: Sintered Iron and Sintered Steel Containing One or Both of the Elements Carbon... | |
| Powder Metallurgical Materials and Products Part 5: Material Specifications for Sintered Metal Products, Excluding Hardmetals Section 5.3: Sintered Alloyed and Sintered Stainless Steels Used for Structural Parts | |
| Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals. Materials, for bearings, impregnated with liquid lubricant | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Compression test | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of contents of metallic elements by X-ray fluorescence: fusion method | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Determination of insoluble (free) carbon: gravimetric method | |
| Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals. Vickers hardness test | |
| Preferred Diameters of Wire Terminations for Capacitors and Resistors | |
| Pressure Regulators Used in Welding, Cutting and Related Processes | |
| Process Control Using Quality Control Chart Methods and Cusum Techniques | |
| Processed Photographic Film for Archival Records Part 1: Specifications for Silver-Gelatine Type on Cellulose Ester Base | |
| Processed Photographic Film for Archival Records Part 2: Specifications for Silver-Gelatin Type on Poly (Ethylene Terephthalate) Base | |
| Purchasing Requirements and Methods of Test for Fluxes for Soft Soldering | |
| Quality Systems - Part 8: Guide to Quality Management and Quality Systems Elements for Services | |
| Quality Systems Part 0: Principal Concepts and Applications Section 0.1: Guide to Selection and Use | |
| Quality Systems Part 0: Principal Concepts and Applications Section 0.2: Guide to Quality Management and Quality System Elements | |
| Quality Systems Part 13: Guide to the Application of BS 5750: Part 1 to the Development, Supply and Maintenance of Software | |
| Quality Systems Part 14: Guide to Dependability Programme Management | |
| Quality Systems Part 5: Guide to the Use of BS 5750: Part 2 \xb4Specification for Manufacture and Installation\xb4 | |
| Quality Systems Part 6: Guide to the Use of BS 5750: Part 3 \xb4Specification for Final Inspection and Test\xb4 | |
| Quality systems. Guide to the use of BS 5750: Part 1 'Specification for design, manufacture and installation' | |
| Quality systems. Specification for design, manufacture and installation | |
| Quality systems. Specification for final inspection and test | |
| Quality systems. Specification for manufacture and installation | |
| Radio-Frequency Protection Ratios in LF, MF and HF Broadcasting | |
| Reciprocating Internal Combustion Engines Addendum 1: Symbols | |
| Recommendations for alarm systems for the elderly and others living at risk | |
| Recommendations for citing publications by bibliographical references | |
| Recommendations for Maximum case dimensions for capacitors and resistors | |
| Reliability of constructed or manufactured products, systems, equipments and components - Part 0: Introductory guide to reliability | |
| Reliability of Systems, Equipment and Components - Part 13: Guide to Reliability Test Conditions for Consumer Equipment - Section 13.3: Conditions Providing a Low Degree of Simulation for Equipment for... | |
| Reliability of Systems, Equipment and Components - Part 13: Guide to Reliability Test Conditions for Consumer Equipment - Section 13.6: Test Cycle 6: Outdoor Transportable Equipment - Low Degree of... | |
| Reliability of systems, equipment and components \x96 Part 24: Guide to the integration of risk techniques in the inspection and testing of complex systems | |
| Reliability of Systems, Equipment and Components Part 10: Guide to Reliability Testing Section 10.1: General Requirements | |
| Reliability of Systems, Equipment and Components Part 10: Guide to Reliability Testing Section 10.2: Design of Test Cycles | |
| Reliability of Systems, Equipment and Components Part 10: Guide to Reliability Testing Section 10.3: Compliance Test Procedures for Steady-State Availability | |
| Reliability of Systems, Equipment and Components Part 10: Guide to Reliability Testing Section 10.5: Compliance Test Plans for Success Ratio | |
| Reliability of Systems, Equipment and Components Part 11: Collection of Reliability, Availability, Maintainability and Maintenance Support Data from the Field | |
| Reliability of Systems, Equipment and Components Part 12: Guide to the Presentation of Reliability, Maintainability and Availability Predictions | |
| Reliability of Systems, Equipment and Components Part 13: Guide to Reliability Test Conditions for Consumer Equipment Section 13.1: Conditions Providing a Low Degree of Simulation for Indoor Portable Equipment | |
| Reliability of Systems, Equipment and Components Part 13: Guide to Reliability Test Conditions for Consumer Equipment Section 13.2: Conditions Providing a High Degree of Simulation for Equipment for Stationary Use... | |
| Reliability of Systems, Equipment and Components Part 13: Guide to Reliability Test Conditions for Consumer Equipment Section 13.5: Ground Mobile Equipment - Low Degree of Simulation | |
| Reliability of Systems, Equipment and Components Part 13: Reliability Test Conditions for Consumer Equipment Section 13.4:Conditions Providing a Low Degree of Simulation for Equipment for Portable and Non-Stationary Use | |
| Reliability of Systems, Equipment and Components Part 14: Guide to Formal Design Review | |
| Reliability of Systems, Equipment and Components Part 15: Guide to Application of Markov Techniques | |
| Reliability of Systems, Equipment and Components Part 16: Guide to Stress Screening Section 16.1: Repairable Items Manufactured in Lots | |
| Reliability of Systems, Equipment and Components Part 17: Reliability Growth: Statistical Test and Estimation Methods | |
| Reliability of Systems, Equipment and Components Part 5: Guide to Failure Modes, Effects and Criticality Analysis (FMEA and FMECA) | |
| Reliability of Systems, Equipment and Components Part 6: Guide to Programmes for Reliability Growth | |
| Reliability of Systems, Equipment and Components Part 7: Guide to Fault Tree Analysis | |
| Reliability of Systems, Equipment and Components Part 8: Guide to Assessment of Reliability of Systems Containing Software | |
| Reliability of Systems, Equipment and Components Part 9: Guide to the Block Diagram Technique | |
| Reliability of Systems, Equipment and Components; Part 18: Reference Conditions for Failure Rates of Electronic Components and Stress Models for Conversion | |
| Reliability of Systems, Equipment and Components; Part 20: Guide to the Specification of Dependability Requirements | |
| Reliability of Systems, Equipment and Components; Part 23: Guide to Life Cycle Costing | |
| Reliability of Systems, Equipments and Components Part 2: Guide to the Assessment of Reliability | |
| Reliability of Systems, Equipments and Components Part 3: Guide to Reliability Practices: Examples | |
| Reliability of Systems, Equipments and Components Part 4: Guide to Specification Clauses Relating to the Achievement and Development of Reliability in New and Existing Items | |
| Reliablility of systems, equipments and components. Guide to reliability programme management | |
| Rolling Bearings - Accessories Part 1: Locknuts, Narrow Series, and Lockwashers with Straight Inner Tab | |
| Rolling Bearings - Accessories Part 2: Locknuts, Wide Series, and Lockwashers with Bent Inner Tab | |
| Rolling Bearings - Accessories Part 3: Tapered Mounting Sleeves | |
| Rolling Bearings - Accessories Part 4: Plummer Block Housings | |
| Rolling Bearings - Accessories Part 5: Snap Ring Groove and Snap Ring Dimensions | |
| Rolling Bearings - Accessories Part 6: Dimensions of Separate Thrust Collars for Cylindrical Roller Bearings | |
| Rolling Bearings - Accessories Part 7: Specification for Flange Dimensions of Radial Ball Bearings with Flanged Outer Ring | |
| Routine Analytical Cigarette Smoking Machine Part 2: Methods of Non-Routine Evaluation | |
| Routine analytical cigarette smoking machine. Specification for the machine and auxiliary equipment, definitions and standard conditions | |
| Safety of Toys Part 3: Migration of Certain Elements | |
| Safety of Toys Part 4: Experimental Sets for Chemistry and Related Activities | |
| Safety of toys. Flammability of toys | |
| Safety of toys. Mechanical and physical properties | |
| Safety rules for the construction and installation of escalators and moving walks \x96 Part 3: Examination and test of new moving walks before putting into service \x96 Specification for means... | |
| Safety Rules for the Construction and Installation of Escalators and Passenger Conveyors Part 1: Specification and Proformas for Test and Examination of New Installations | |
| Safety Rules for the Construction and Installation of Escalators and Passenger Conveyors | |
| Sills and copings - Part 1: Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone | |
| Sills and copings - Part 2: Specification for copings of precast concrete, cast stone, clayware, slate and natural stone | |
| Sills, copings and cappings - Part 2: Specification for copings and cappings of precast concrete, cast stone, clayware, slate and natural stone | |
| Sills, copings and cappings \x97 Part 1: Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone | |
| Solutions of Wood Preservatives in Organic Solvents Part 1: Solutions for General Purpose Applications, Including Timber That is to Be Painted | |
| Solutions of Wood Preservatives in Organic Solvents Part 2: Specification for Pentachlorophenol Wood Preservative Solution for Use on Timber That is Not Required to Be Painted | |
| Solutions of Wood Preservatives in Organic Solvents Part 3: Methods of Treatment | |
| Solventless polymerisable resinous compounds used for electrical insulation - Part 2: Methods of test - Section 2.2 Coating powders | |
| Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 2: Methods of Test Section 2.1: Materials Other Than Coating Powders | |
| Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specification for Individual Materials Section 3.4: Filled Polyurethane Compounds | |
| Solventless Polymerisable Resinous Compounds Used for ELectrical Insulation Part 3: Specifications for Individual Materials Section 3.11: Epoxy Resin-Based Coating Powders | |
| Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Section 3.1: Unfilled Epoxy Resinous Compounds | |
| Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Section 3.2: Quartz Filled Epoxy Resinous Compounds | |
| Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Section 3.3: Unfilled Polyurethane Compounds | |
| Solventless Polymersible Resinous Compounds Used for Electrical Insulation Part 1: Definitions and Requirements | |
| Specification for acetic acid | |
| Specification for adhesive coated labels for marine use | |
| Specification for Alternating-current line relays double-element 3-position (for railway signalling) | |
| Specification for Apparatus for gamma radiography | |
| SPECIFICATION FOR ASBESTOS CEMENT FLUE PIPES & FITTINGS: LIGHT QUALITY | |
| Specification for B.A. Screws bolts and nuts | |
| Specification for carbon tetrachloride | |
| Specification for codes for the representation of currencies and funds | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 10: Loose Bulk Materials: Vertical Screw Conveyors | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 11: Unit Loads: Fixed Slat Conveyors (Metal or Wood) with Horizontal Shafts | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 12: Unit Loads: Mobile Slat Conveyors (Metal or Wood) with Horizontal Shafts | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 13: Unit Loads: Arm Elevators and Push Bar Conveyors | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 14: Unit Loads: Live Roller Conveyors (With Positive or Friction Drive) | |
| Specification for Continuous mechanical handling equipment - Safety requirements - Part 17: Unit loads: continuous plate conveyors (horizontal) | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 2: Loose Bulk Materials: Pneumatic Handling Installations | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 4: Loose Bulk Materials: Mobile Suction Pipes Suspended from Derrick Jibs Used in Pneumatic Handling | |
| Specification for Continuous Mechanical Handling Equipment - Safety Requirements - Part 9: Loose Bulk Materials: Bulk Throwing Machines | |
| Specification for Dental Porcelains for Jacket Crowns | |
| Specification for Designation of the Cylinders of Reciprocating Internal Combustion Engines | |
| Specification for dimensions of basic features of fluid power cylinders | |
| Specification for Dimensions of Housings for Hydraulic Seals for Reciprocating Applications | |
| Specification for Electrical analogue and state signals for use in coal mines | |
| Specification for Flammability Performance of Fabrics and Fabric Assemblies Used in Sleepwear and Dressing Gowns | |
| Specification for Glass disposable Pasteur pipettes | |
| Specification for Gold potassium cyanide for electroplating | |
| Specification for Hermetically sealed flat double glazing units | |
| Specification for Insulating jackets for domestic hot water storage cylinders | |
| Specification for Interchangeable Conical Ground Glass Joints | |
| Specification for Interface dimensions of snap-on connections for use with electrically controlled hydraulic equipment | |
| Specification for Lighting Columns Part 1: Definitions and Terms | |
| Specification for Low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - FormC, for direct current, 3 or 4 terminals | |
| Specification for Low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - FormD, for direct current, 3 or 4 terminals | |
| Specification for oblong tins: volumetric range | |
| Specification for Plastic Connectors for Use with Horizontal Outlet Vitreous China WC Pans | |
| Specification for potassium hydroxide for use in alkaline cells | |
| Specification for preformed rigid urethane and isocyanurate foams for thermal insulation of pipework and equipment | |
| Specification for Preparations of wood preservatives in organic solvents | |
| Specification for Pruner shears (secateurs) | |
| Specification for rolling bearings - static load ratings | |
| Specification for round sealed metal cans for motor oil and allied products | |
| Specification for screw cores made of magnetic oxides or iron powder | |
| Specification for Skateboards | |
| Specification for Sterile Intravascular Catheters for Single Use | |
| Specification for Straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements | |
| Specification for Taper Pins, Unhardened; Metric Series | |
| Specification for terminal units, hose assemblies and their connectors for use with medical gas pipeline systems | |
| Specification for Textile Labels Requiring to Be Washed and/or Dry Cleaned | |
| Specification for toothbrushes | |
| Specification for transistorized ballasts for fluorescent lamps | |
| Specification for tropical hardwoods graded for structural use | |
| Specification for Urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves | |
| Specification for webbing load restraint assemblies for use in surface transport | |
| Specification for Wood Chipboard and Methods of Test for Particle Board | |
| Specification. Reversible connectors | |
| Stabilized Power Supplies d.c. Output Part 4: Test Other Than Radio-Frequency Interference | |
| Stabilized power supplies, d.c. output - Part 2: Method of specifying rating and performance | |
| Stabilized Power Supplies, d.c. Output Part 1: Terms and Definitions | |
| Stiles, Bridle Gates and Kissing Gates | |
| Storage Conditions for Silver Image Photographic Plates for Record Purposes | |
| Subjective Assessment of Sound Quality - Section 10C - Audio-Frequency Characteristics of Sound-Broadcasting Signals | |
| SUBJECTIVE ASSESSMENT OF SOUND QUALITY | |
| Surface Active Agents. Detergents for Washing Fabrics. Guide for Comparative Testing for Performance | |
| Test Methods for Determining Electrolytic Corrosion with Electric Insulating Materials | |
| Textile Machinery and Accessories: Pirns for Winding at the Loom Part 1: Specification for Weft Pirns Without Rings | |
| Thermal Insulation of Cavity Walls (With Masonry or Concrete Inner and Outer Leaves) by Filling with Urea- Formaldehyde (UF) Foam Systems | |
| Tracked Changes (Redline) - Accuracy and tolerance in design and construction - Guide | |
| Tracked Changes (Redline) - Code of practice for the safe use of explosives in the construction industry | |
| Tracked Changes (Redline) - Dimensions of probes and terminal units for medical gas supply systems \x96 Requirements | |
| Tracked Changes (Redline) - Gaps, gates and stiles \x96 Specification | |
| Tracked Changes (Redline) - Guide to the selection of charting methods and capability assessment for use in statistical process control | |
| Use of Masonry Part 2: Structural Use of Reinforced and Prestressed Masonry | |
| Use of Masonry Part 3: Materials and Components, Design and Workmanship | |
| Varnished Fabrics for Electrical Purposes Part 1: Definitions and General Requirements | |
| Varnished Fabrics for Electrical Purposes Part 2: Methods of Test | |
| Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.1: Oleoresinous Varnish - Cotton Base, OR/C | |
| Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Section 3.2: Glass- Fabric Based Varnished Fabrics with Epoxy, Polyurethane, Silicone, Polyester, Bituminous or Oleoresinous Varnish | |
| Visual strength grading of hardwood - Specification | |
| Visual strength grading of temperate hardwood - Specification | |
| Vocabulary for Reciprocating internal combustion engines | |
| Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure | |
| Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure |
| << Prev | Next >> |